DPDK patches and discussions
 help / color / mirror / Atom feed
From: "Yao, Lei A" <lei.a.yao@intel.com>
To: "Hu, Jiayu" <jiayu.hu@intel.com>, "dev@dpdk.org" <dev@dpdk.org>
Cc: "Ananyev, Konstantin" <konstantin.ananyev@intel.com>,
	"Tan, Jianfeng" <jianfeng.tan@intel.com>,
	"stephen@networkplumber.org" <stephen@networkplumber.org>,
	"yliu@fridaylinux.org" <yliu@fridaylinux.org>,
	"Wiles, Keith" <keith.wiles@intel.com>,
	"Bie, Tiwei" <tiwei.bie@intel.com>
Subject: Re: [dpdk-dev] [PATCH v6 3/3] app/testpmd: enable TCP/IPv4 GRO
Date: Sat, 24 Jun 2017 08:01:02 +0000	[thread overview]
Message-ID: <2DBBFF226F7CF64BAFCA79B681719D953A20CF33@shsmsx102.ccr.corp.intel.com> (raw)
In-Reply-To: <1498229000-94867-4-git-send-email-jiayu.hu@intel.com>



> -----Original Message-----
> From: Hu, Jiayu
> Sent: Friday, June 23, 2017 10:43 PM
> To: dev@dpdk.org
> Cc: Ananyev, Konstantin <konstantin.ananyev@intel.com>; Tan, Jianfeng
> <jianfeng.tan@intel.com>; stephen@networkplumber.org;
> yliu@fridaylinux.org; Wiles, Keith <keith.wiles@intel.com>; Bie, Tiwei
> <tiwei.bie@intel.com>; Yao, Lei A <lei.a.yao@intel.com>; Hu, Jiayu
> <jiayu.hu@intel.com>
> Subject: [PATCH v6 3/3] app/testpmd: enable TCP/IPv4 GRO
> 
> This patch enables TCP/IPv4 GRO library in csum forwarding engine.
> By default, GRO is turned off. Users can use command "gro (on|off)
> (port_id)" to enable or disable GRO for a given port. If a port is
> enabled GRO, all TCP/IPv4 packets received from the port are performed
> GRO. Besides, users can set max flow number and packets number per-flow
> by command "gro set (max_flow_num) (max_item_num_per_flow)
> (port_id)".
> 
> Signed-off-by: Jiayu Hu <jiayu.hu@intel.com>
Tested-By: Lei Yao<lei.a.yao@intel.com>
This patch is tested on the following test bench:
OS: Ubuntu 16.04
CPU: Intel(R) Xeon(R) CPU E5-2680 v2 @ 2.80GHz
NIC: XXV710 25G
We can see the iperf result improve a lot after enable GRO. The data
flow is NIC1->NIC2->testpmd(GRO on/off)->vhost->virtio-net(in VM) 

> ---
>  app/test-pmd/cmdline.c                      | 125
> ++++++++++++++++++++++++++++
>  app/test-pmd/config.c                       |  37 ++++++++
>  app/test-pmd/csumonly.c                     |   5 ++
>  app/test-pmd/testpmd.c                      |   3 +
>  app/test-pmd/testpmd.h                      |  11 +++
>  doc/guides/testpmd_app_ug/testpmd_funcs.rst |  34 ++++++++
>  6 files changed, 215 insertions(+)
> 
> diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c
> index ff8ffd2..cb359e1 100644
> --- a/app/test-pmd/cmdline.c
> +++ b/app/test-pmd/cmdline.c
> @@ -76,6 +76,7 @@
>  #include <rte_devargs.h>
>  #include <rte_eth_ctrl.h>
>  #include <rte_flow.h>
> +#include <rte_gro.h>
> 
>  #include <cmdline_rdline.h>
>  #include <cmdline_parse.h>
> @@ -419,6 +420,14 @@ static void cmd_help_long_parsed(void
> *parsed_result,
>  			"tso show (portid)"
>  			"    Display the status of TCP Segmentation
> Offload.\n\n"
> 
> +			"gro (on|off) (port_id)"
> +			"    Enable or disable Generic Receive Offload in io"
> +			" forward engine.\n\n"
> +
> +			"gro set (max_flow_num)
> (max_item_num_per_flow) (port_id)\n"
> +			"    Set max flow number and max packet number
> per-flow"
> +			" for GRO.\n\n"
> +
>  			"set fwd (%s)\n"
>  			"    Set packet forwarding mode.\n\n"
> 
> @@ -3827,6 +3836,120 @@ cmdline_parse_inst_t cmd_tunnel_tso_show = {
>  	},
>  };
> 
> +/* *** SET GRO FOR A PORT *** */
> +struct cmd_gro_result {
> +	cmdline_fixed_string_t cmd_keyword;
> +	cmdline_fixed_string_t mode;
> +	uint8_t port_id;
> +};
> +
> +static void
> +cmd_enable_gro_parsed(void *parsed_result,
> +		__attribute__((unused)) struct cmdline *cl,
> +		__attribute__((unused)) void *data)
> +{
> +	struct cmd_gro_result *res;
> +
> +	res = parsed_result;
> +	setup_gro(res->mode, res->port_id);
> +}
> +
> +cmdline_parse_token_string_t cmd_gro_keyword =
> +	TOKEN_STRING_INITIALIZER(struct cmd_gro_result,
> +			cmd_keyword, "gro");
> +cmdline_parse_token_string_t cmd_gro_mode =
> +	TOKEN_STRING_INITIALIZER(struct cmd_gro_result,
> +			mode, "on#off");
> +cmdline_parse_token_num_t cmd_gro_pid =
> +	TOKEN_NUM_INITIALIZER(struct cmd_gro_result,
> +			port_id, UINT8);
> +
> +cmdline_parse_inst_t cmd_enable_gro = {
> +	.f = cmd_enable_gro_parsed,
> +	.data = NULL,
> +	.help_str = "gro (on|off) (port_id)",
> +	.tokens = {
> +		(void *)&cmd_gro_keyword,
> +		(void *)&cmd_gro_mode,
> +		(void *)&cmd_gro_pid,
> +		NULL,
> +	},
> +};
> +
> +/* *** SET MAX FLOW NUMBER AND ITEM NUM PER FLOW FOR GRO ***
> */
> +struct cmd_gro_set_result {
> +	cmdline_fixed_string_t gro;
> +	cmdline_fixed_string_t mode;
> +	uint16_t flow_num;
> +	uint16_t item_num_per_flow;
> +	uint8_t port_id;
> +};
> +
> +static void
> +cmd_gro_set_parsed(void *parsed_result,
> +		       __attribute__((unused)) struct cmdline *cl,
> +		       __attribute__((unused)) void *data)
> +{
> +	struct cmd_gro_set_result *res = parsed_result;
> +
> +	if (port_id_is_invalid(res->port_id, ENABLED_WARN))
> +		return;
> +	if (test_done == 0) {
> +		printf("Before set GRO flow_num and item_num_per_flow,"
> +				" please stop forwarding first\n");
> +		return;
> +	}
> +
> +	if (!strcmp(res->mode, "set")) {
> +		if (res->flow_num == 0)
> +			printf("Invalid flow number. Revert to default value:"
> +					" %u.\n",
> GRO_DEFAULT_FLOW_NUM);
> +		else
> +			gro_ports[res->port_id].param.max_flow_num =
> +				res->flow_num;
> +
> +		if (res->item_num_per_flow == 0)
> +			printf("Invalid item number per-flow. Revert"
> +					" to default value:%u.\n",
> +
> 	GRO_DEFAULT_ITEM_NUM_PER_FLOW);
> +		else
> +			gro_ports[res->port_id].param.max_item_per_flow
> =
> +				res->item_num_per_flow;
> +	}
> +}
> +
> +cmdline_parse_token_string_t cmd_gro_set_gro =
> +	TOKEN_STRING_INITIALIZER(struct cmd_gro_set_result,
> +				gro, "gro");
> +cmdline_parse_token_string_t cmd_gro_set_mode =
> +	TOKEN_STRING_INITIALIZER(struct cmd_gro_set_result,
> +				mode, "set");
> +cmdline_parse_token_num_t cmd_gro_set_flow_num =
> +	TOKEN_NUM_INITIALIZER(struct cmd_gro_set_result,
> +				flow_num, UINT16);
> +cmdline_parse_token_num_t cmd_gro_set_item_num_per_flow =
> +	TOKEN_NUM_INITIALIZER(struct cmd_gro_set_result,
> +				item_num_per_flow, UINT16);
> +cmdline_parse_token_num_t cmd_gro_set_portid =
> +	TOKEN_NUM_INITIALIZER(struct cmd_gro_set_result,
> +				port_id, UINT8);
> +
> +cmdline_parse_inst_t cmd_gro_set = {
> +	.f = cmd_gro_set_parsed,
> +	.data = NULL,
> +	.help_str = "gro set <max_flow_num> <max_item_num_per_flow>
> "
> +		"<port_id>: set max flow number and max packet number
> per-flow "
> +		"for GRO",
> +	.tokens = {
> +		(void *)&cmd_gro_set_gro,
> +		(void *)&cmd_gro_set_mode,
> +		(void *)&cmd_gro_set_flow_num,
> +		(void *)&cmd_gro_set_item_num_per_flow,
> +		(void *)&cmd_gro_set_portid,
> +		NULL,
> +	},
> +};
> +
>  /* *** ENABLE/DISABLE FLUSH ON RX STREAMS *** */
>  struct cmd_set_flush_rx {
>  	cmdline_fixed_string_t set;
> @@ -13732,6 +13855,8 @@ cmdline_parse_ctx_t main_ctx[] = {
>  	(cmdline_parse_inst_t *)&cmd_tso_show,
>  	(cmdline_parse_inst_t *)&cmd_tunnel_tso_set,
>  	(cmdline_parse_inst_t *)&cmd_tunnel_tso_show,
> +	(cmdline_parse_inst_t *)&cmd_enable_gro,
> +	(cmdline_parse_inst_t *)&cmd_gro_set,
>  	(cmdline_parse_inst_t *)&cmd_link_flow_control_set,
>  	(cmdline_parse_inst_t *)&cmd_link_flow_control_set_rx,
>  	(cmdline_parse_inst_t *)&cmd_link_flow_control_set_tx,
> diff --git a/app/test-pmd/config.c b/app/test-pmd/config.c
> index b0b340e..2a33a63 100644
> --- a/app/test-pmd/config.c
> +++ b/app/test-pmd/config.c
> @@ -71,6 +71,7 @@
>  #ifdef RTE_LIBRTE_BNXT_PMD
>  #include <rte_pmd_bnxt.h>
>  #endif
> +#include <rte_gro.h>
> 
>  #include "testpmd.h"
> 
> @@ -2414,6 +2415,42 @@ set_tx_pkt_segments(unsigned *seg_lengths,
> unsigned nb_segs)
>  	tx_pkt_nb_segs = (uint8_t) nb_segs;
>  }
> 
> +void
> +setup_gro(const char *mode, uint8_t port_id)
> +{
> +	if (!rte_eth_dev_is_valid_port(port_id)) {
> +		printf("invalid port id %u\n", port_id);
> +		return;
> +	}
> +	if (test_done == 0) {
> +		printf("Before enable/disable GRO,"
> +				" please stop forwarding first\n");
> +		return;
> +	}
> +	if (strcmp(mode, "on") == 0) {
> +		if (gro_ports[port_id].enable) {
> +			printf("port %u has enabled GRO\n", port_id);
> +			return;
> +		}
> +		gro_ports[port_id].enable = 1;
> +		gro_ports[port_id].param.desired_gro_types =
> GRO_TCP_IPV4;
> +		gro_ports[port_id].param.max_packet_size = UINT16_MAX;
> +
> +		if (gro_ports[port_id].param.max_flow_num == 0)
> +			gro_ports[port_id].param.max_flow_num =
> +				GRO_DEFAULT_FLOW_NUM;
> +		if (gro_ports[port_id].param.max_item_per_flow == 0)
> +			gro_ports[port_id].param.max_item_per_flow =
> +				GRO_DEFAULT_ITEM_NUM_PER_FLOW;
> +	} else {
> +		if (gro_ports[port_id].enable == 0) {
> +			printf("port %u has disabled GRO\n", port_id);
> +			return;
> +		}
> +		gro_ports[port_id].enable = 0;
> +	}
> +}
> +
>  char*
>  list_pkt_forwarding_modes(void)
>  {
> diff --git a/app/test-pmd/csumonly.c b/app/test-pmd/csumonly.c
> index 66fc9a0..430bd8b 100644
> --- a/app/test-pmd/csumonly.c
> +++ b/app/test-pmd/csumonly.c
> @@ -71,6 +71,7 @@
>  #include <rte_prefetch.h>
>  #include <rte_string_fns.h>
>  #include <rte_flow.h>
> +#include <rte_gro.h>
>  #include "testpmd.h"
> 
>  #define IP_DEFTTL  64   /* from RFC 1340. */
> @@ -658,6 +659,10 @@ pkt_burst_checksum_forward(struct fwd_stream
> *fs)
>  				 nb_pkt_per_burst);
>  	if (unlikely(nb_rx == 0))
>  		return;
> +	if (unlikely(gro_ports[fs->rx_port].enable))
> +		nb_rx = rte_gro_reassemble_burst(pkts_burst,
> +				nb_rx,
> +				gro_ports[fs->rx_port].param);
> 
>  #ifdef RTE_TEST_PMD_RECORD_BURST_STATS
>  	fs->rx_burst_stats.pkt_burst_spread[nb_rx]++;
> diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c
> index b29328a..ed27c7a 100644
> --- a/app/test-pmd/testpmd.c
> +++ b/app/test-pmd/testpmd.c
> @@ -90,6 +90,7 @@
>  #ifdef RTE_LIBRTE_LATENCY_STATS
>  #include <rte_latencystats.h>
>  #endif
> +#include <rte_gro.h>
> 
>  #include "testpmd.h"
> 
> @@ -378,6 +379,8 @@ lcoreid_t bitrate_lcore_id;
>  uint8_t bitrate_enabled;
>  #endif
> 
> +struct gro_status gro_ports[RTE_MAX_ETHPORTS];
> +
>  /* Forward function declarations */
>  static void map_port_queue_stats_mapping_registers(uint8_t pi, struct
> rte_port *port);
>  static void check_all_ports_link_status(uint32_t port_mask);
> diff --git a/app/test-pmd/testpmd.h b/app/test-pmd/testpmd.h
> index 364502d..377d933 100644
> --- a/app/test-pmd/testpmd.h
> +++ b/app/test-pmd/testpmd.h
> @@ -34,6 +34,8 @@
>  #ifndef _TESTPMD_H_
>  #define _TESTPMD_H_
> 
> +#include <rte_gro.h>
> +
>  #define RTE_PORT_ALL            (~(portid_t)0x0)
> 
>  #define RTE_TEST_RX_DESC_MAX    2048
> @@ -428,6 +430,14 @@ extern struct ether_addr
> peer_eth_addrs[RTE_MAX_ETHPORTS];
>  extern uint32_t burst_tx_delay_time; /**< Burst tx delay time(us) for mac-
> retry. */
>  extern uint32_t burst_tx_retry_num;  /**< Burst tx retry number for mac-
> retry. */
> 
> +#define GRO_DEFAULT_FLOW_NUM 4
> +#define GRO_DEFAULT_ITEM_NUM_PER_FLOW DEF_PKT_BURST
> +struct gro_status {
> +	struct rte_gro_param param;
> +	uint8_t enable;
> +};
> +extern struct gro_status gro_ports[RTE_MAX_ETHPORTS];
> +
>  static inline unsigned int
>  lcore_num(void)
>  {
> @@ -626,6 +636,7 @@ void get_2tuple_filter(uint8_t port_id, uint16_t
> index);
>  void get_5tuple_filter(uint8_t port_id, uint16_t index);
>  int rx_queue_id_is_invalid(queueid_t rxq_id);
>  int tx_queue_id_is_invalid(queueid_t txq_id);
> +void setup_gro(const char *mode, uint8_t port_id);
> 
>  /* Functions to manage the set of filtered Multicast MAC addresses */
>  void mcast_addr_add(uint8_t port_id, struct ether_addr *mc_addr);
> diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
> b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
> index 2b9a1ea..528c833 100644
> --- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
> +++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
> @@ -884,6 +884,40 @@ Display the status of TCP Segmentation Offload::
> 
>     testpmd> tso show (port_id)
> 
> +gro
> +~~~~~~~~
> +
> +Enable or disable GRO in ``csum`` forwarding engine::
> +
> +   testpmd> gro (on|off) (port_id)
> +
> +If enabled, the csum forwarding engine will perform GRO on the TCP/IPv4
> +packets received from the given port.
> +
> +If disabled, packets received from the given port won't be performed
> +GRO. By default, GRO is disabled for all ports.
> +
> +.. note::
> +
> +   When enable GRO for a port, TCP/IPv4 packets received from the port
> +   will be performed GRO. After GRO, the merged packets are multi-
> segments.
> +   But csum forwarding engine doesn't support to calculate TCP checksum
> +   for multi-segment packets in SW. So please select TCP HW checksum
> +   calculation for the port which GROed packets are transmitted to.
> +
> +gro set
> +~~~~~~~~
> +
> +Set max flow number and max packet number per-flow for GRO::
> +
> +   testpmd> gro set (max_flow_num) (max_item_num_per_flow) (port_id)
> +
> +The product of ``max_flow_num`` and ``max_item_num_per_flow`` is the
> max
> +number of packets a GRO table can store.
> +
> +If current packet number is greater than or equal to the max value, GRO
> +will stop processing incoming packets.
> +
>  mac_addr add
>  ~~~~~~~~~~~~
> 
> --
> 2.7.4

  reply	other threads:[~2017-06-24  8:01 UTC|newest]

Thread overview: 141+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-03-22  9:32 [dpdk-dev] [PATCH 0/2] lib: add TCP IPv4 GRO support Jiayu Hu
2017-03-22  9:32 ` [dpdk-dev] [PATCH 1/2] lib: add Generic Receive Offload support for TCP IPv4 packets Jiayu Hu
2017-03-22  9:32 ` [dpdk-dev] [PATCH 2/2] app/testpmd: provide TCP IPv4 GRO function in iofwd mode Jiayu Hu
     [not found] ` <1B893F1B-4DA8-4F88-9583-8C0BAA570832@intel.com>
     [not found]   ` <20170323021502.GA114662@localhost.localdomain>
     [not found]     ` <C830A6FC-F440-4E68-AB4E-2FD502722E3F@intel.com>
     [not found]       ` <20170323062433.GA120139@localhost.localdomain>
     [not found]         ` <59AF69C657FD0841A61C55336867B5B066729E3F@IRSMSX103.ger.corp.intel.com>
     [not found]           ` <20170323102135.GA124301@localhost.localdomain>
     [not found]             ` <2601191342CEEE43887BDE71AB9772583FAD410A@IRSMSX109.ger.corp.intel.com>
2017-03-24  2:23               ` [dpdk-dev] [PATCH 0/2] lib: add TCP IPv4 GRO support Jiayu Hu
2017-03-24  6:18                 ` Wiles, Keith
2017-03-24  7:22                   ` Yuanhan Liu
2017-03-24  8:06                     ` Jiayu Hu
2017-03-24 11:43                       ` Ananyev, Konstantin
2017-03-24 14:37                         ` Wiles, Keith
2017-03-24 14:59                           ` Olivier Matz
2017-03-24 15:07                             ` Wiles, Keith
2017-03-28 13:40                               ` Wiles, Keith
2017-03-28 13:57                                 ` Hu, Jiayu
2017-03-28 16:06                                   ` Wiles, Keith
2017-03-29 10:47                         ` Morten Brørup
2017-03-29 12:12                           ` Wiles, Keith
2017-04-04 12:31 ` [dpdk-dev] [PATCH v2 0/3] support GRO in DPDK Jiayu Hu
2017-04-04 12:31   ` [dpdk-dev] [PATCH v2 1/3] lib: add Generic Receive Offload API framework Jiayu Hu
2017-04-04 12:31   ` [dpdk-dev] [PATCH v2 2/3] lib/gro: add TCP/IPv4 GRO support Jiayu Hu
2017-04-04 12:31   ` [dpdk-dev] [PATCH v2 3/3] app/testpmd: enable GRO feature Jiayu Hu
2017-04-24  8:09   ` [dpdk-dev] [PATCH v3 0/3] support GRO in DPDK Jiayu Hu
2017-04-24  8:09     ` [dpdk-dev] [PATCH v3 1/3] lib: add Generic Receive Offload API framework Jiayu Hu
2017-05-22  9:19       ` Ananyev, Konstantin
2017-05-23 10:31         ` Jiayu Hu
2017-05-24 12:38           ` Ananyev, Konstantin
2017-05-26  7:26             ` Jiayu Hu
2017-05-26 23:10               ` Ananyev, Konstantin
2017-05-27  3:41                 ` Jiayu Hu
2017-05-27 11:12                   ` Ananyev, Konstantin
2017-05-27 14:09                     ` Jiayu Hu
2017-05-27 16:51                       ` Ananyev, Konstantin
2017-05-29 10:22                         ` Hu, Jiayu
2017-05-29 12:18                           ` Bruce Richardson
2017-05-30 14:10                             ` Hu, Jiayu
2017-05-29 12:51                           ` Ananyev, Konstantin
2017-05-30  5:29                             ` Hu, Jiayu
2017-05-30 11:56                               ` Ananyev, Konstantin
2017-04-24  8:09     ` [dpdk-dev] [PATCH v3 2/3] lib/gro: add TCP/IPv4 GRO support Jiayu Hu
2017-04-24  8:09     ` [dpdk-dev] [PATCH v3 3/3] app/testpmd: enable GRO feature Jiayu Hu
2017-06-07  9:24       ` Wu, Jingjing
2017-06-07 11:08     ` [dpdk-dev] [PATCH v4 0/3] Support TCP/IPv4 GRO in DPDK Jiayu Hu
2017-06-07 11:08       ` [dpdk-dev] [PATCH v4 1/3] lib: add Generic Receive Offload API framework Jiayu Hu
2017-06-07 11:08       ` [dpdk-dev] [PATCH v4 2/3] lib/gro: add TCP/IPv4 GRO support Jiayu Hu
2017-06-07 11:08       ` [dpdk-dev] [PATCH v4 3/3] app/testpmd: enable TCP/IPv4 GRO Jiayu Hu
2017-06-18  7:21       ` [dpdk-dev] [PATCH v5 0/3] Support TCP/IPv4 GRO in DPDK Jiayu Hu
2017-06-18  7:21         ` [dpdk-dev] [PATCH v5 1/3] lib: add Generic Receive Offload API framework Jiayu Hu
2017-06-19  4:03           ` Tiwei Bie
2017-06-19  5:16             ` Jiayu Hu
2017-06-19 15:43           ` Tan, Jianfeng
2017-06-19 15:55           ` Stephen Hemminger
2017-06-20  1:48             ` Jiayu Hu
2017-06-18  7:21         ` [dpdk-dev] [PATCH v5 2/3] lib/gro: add TCP/IPv4 GRO support Jiayu Hu
2017-06-19 15:43           ` Tan, Jianfeng
2017-06-20  3:22             ` Jiayu Hu
2017-06-20 15:15               ` Ananyev, Konstantin
2017-06-20 16:16                 ` Jiayu Hu
2017-06-20 15:21               ` Ananyev, Konstantin
2017-06-20 23:30               ` Tan, Jianfeng
2017-06-20 23:55                 ` Stephen Hemminger
2017-06-22  7:39                 ` Jiayu Hu
2017-06-22  8:18             ` Jiayu Hu
2017-06-22  9:35               ` Tan, Jianfeng
2017-06-22 13:55                 ` Jiayu Hu
2017-06-18  7:21         ` [dpdk-dev] [PATCH v5 3/3] app/testpmd: enable TCP/IPv4 GRO Jiayu Hu
2017-06-19  1:24           ` Yao, Lei A
2017-06-19  2:27           ` Wu, Jingjing
2017-06-19  3:22             ` Jiayu Hu
2017-06-19  1:39         ` [dpdk-dev] [PATCH v5 0/3] Support TCP/IPv4 GRO in DPDK Tan, Jianfeng
2017-06-19  3:07           ` Jiayu Hu
2017-06-19  5:12             ` Jiayu Hu
2017-06-23 14:43         ` [dpdk-dev] [PATCH v6 " Jiayu Hu
2017-06-23 14:43           ` [dpdk-dev] [PATCH v6 1/3] lib: add Generic Receive Offload API framework Jiayu Hu
2017-06-25 16:53             ` Tan, Jianfeng
2017-06-23 14:43           ` [dpdk-dev] [PATCH v6 2/3] lib/gro: add TCP/IPv4 GRO support Jiayu Hu
2017-06-25 16:53             ` Tan, Jianfeng
2017-06-26  1:58               ` Jiayu Hu
2017-06-23 14:43           ` [dpdk-dev] [PATCH v6 3/3] app/testpmd: enable TCP/IPv4 GRO Jiayu Hu
2017-06-24  8:01             ` Yao, Lei A [this message]
2017-06-25 16:03           ` [dpdk-dev] [PATCH v6 0/3] Support TCP/IPv4 GRO in DPDK Tan, Jianfeng
2017-06-26  1:35             ` Jiayu Hu
2017-06-26  6:43           ` [dpdk-dev] [PATCH v7 " Jiayu Hu
2017-06-26  6:43             ` [dpdk-dev] [PATCH v7 1/3] lib: add Generic Receive Offload API framework Jiayu Hu
2017-06-27 23:42               ` Ananyev, Konstantin
2017-06-28  2:17                 ` Jiayu Hu
2017-06-28 17:41                   ` Ananyev, Konstantin
2017-06-29  1:19                     ` Jiayu Hu
2017-06-26  6:43             ` [dpdk-dev] [PATCH v7 2/3] lib/gro: add TCP/IPv4 GRO support Jiayu Hu
2017-06-28 23:56               ` Ananyev, Konstantin
2017-06-29  2:26                 ` Jiayu Hu
2017-06-30 12:07                   ` Ananyev, Konstantin
2017-06-30 15:40                     ` Hu, Jiayu
2017-06-26  6:43             ` [dpdk-dev] [PATCH v7 3/3] app/testpmd: enable TCP/IPv4 GRO Jiayu Hu
2017-06-29 10:58             ` [dpdk-dev] [PATCH v8 0/3] Support TCP/IPv4 GRO in DPDK Jiayu Hu
2017-06-29 10:58               ` [dpdk-dev] [PATCH v8 1/3] lib: add Generic Receive Offload API framework Jiayu Hu
2017-06-29 10:58               ` [dpdk-dev] [PATCH v8 2/3] lib/gro: add TCP/IPv4 GRO support Jiayu Hu
2017-06-29 17:51                 ` Stephen Hemminger
2017-06-30  2:07                   ` Jiayu Hu
2017-06-29 10:59               ` [dpdk-dev] [PATCH v8 3/3] app/testpmd: enable TCP/IPv4 GRO Jiayu Hu
2017-06-30  2:26                 ` Wu, Jingjing
2017-06-30  6:53               ` [dpdk-dev] [PATCH v9 0/3] Support TCP/IPv4 GRO in DPDK Jiayu Hu
2017-06-30  6:53                 ` [dpdk-dev] [PATCH v9 1/3] lib: add Generic Receive Offload API framework Jiayu Hu
2017-06-30  6:53                 ` [dpdk-dev] [PATCH v9 2/3] lib/gro: add TCP/IPv4 GRO support Jiayu Hu
2017-06-30  6:53                 ` [dpdk-dev] [PATCH v9 3/3] app/testpmd: enable TCP/IPv4 GRO Jiayu Hu
2017-07-01 11:08                 ` [dpdk-dev] [PATCH v10 0/3] Support TCP/IPv4 GRO in DPDK Jiayu Hu
2017-07-01 11:08                   ` [dpdk-dev] [PATCH v10 1/3] lib: add Generic Receive Offload API framework Jiayu Hu
2017-07-02 10:19                     ` Tan, Jianfeng
2017-07-03  5:56                       ` Hu, Jiayu
2017-07-04  8:11                         ` Yuanhan Liu
2017-07-04  8:37                     ` Yuanhan Liu
2017-07-04 16:01                       ` Hu, Jiayu
2017-07-01 11:08                   ` [dpdk-dev] [PATCH v10 2/3] lib/gro: add TCP/IPv4 GRO support Jiayu Hu
2017-07-02 10:19                     ` Tan, Jianfeng
2017-07-03  5:13                       ` Hu, Jiayu
2017-07-04  9:03                     ` Yuanhan Liu
2017-07-04 16:03                       ` Hu, Jiayu
2017-07-01 11:08                   ` [dpdk-dev] [PATCH v10 3/3] app/testpmd: enable TCP/IPv4 GRO Jiayu Hu
2017-07-05  4:08                   ` [dpdk-dev] [PATCH v11 0/3] Support TCP/IPv4 GRO in DPDK Jiayu Hu
2017-07-05  4:08                     ` [dpdk-dev] [PATCH v11 1/3] lib: add Generic Receive Offload API framework Jiayu Hu
2017-07-07  6:55                       ` Tan, Jianfeng
2017-07-07  9:19                         ` Tan, Jianfeng
2017-07-05  4:08                     ` [dpdk-dev] [PATCH v11 2/3] lib/gro: add TCP/IPv4 GRO support Jiayu Hu
2017-07-07  6:55                       ` Tan, Jianfeng
2017-07-05  4:08                     ` [dpdk-dev] [PATCH v11 3/3] app/testpmd: enable TCP/IPv4 GRO Jiayu Hu
2017-07-07 10:39                     ` [dpdk-dev] [PATCH v12 0/3] Support TCP/IPv4 GRO in DPDK Jiayu Hu
2017-07-07 10:39                       ` [dpdk-dev] [PATCH v12 1/3] lib: add Generic Receive Offload API framework Jiayu Hu
2017-07-08 16:37                         ` Tan, Jianfeng
2017-07-07 10:39                       ` [dpdk-dev] [PATCH v12 2/3] lib/gro: add TCP/IPv4 GRO support Jiayu Hu
2017-07-08 16:37                         ` Tan, Jianfeng
2017-07-07 10:39                       ` [dpdk-dev] [PATCH v12 3/3] app/testpmd: enable TCP/IPv4 GRO Jiayu Hu
2017-07-09  1:13                       ` [dpdk-dev] [PATCH v13 0/3] Support TCP/IPv4 GRO in DPDK Jiayu Hu
2017-07-09  1:13                         ` [dpdk-dev] [PATCH v13 1/3] lib: add Generic Receive Offload API framework Jiayu Hu
2017-07-09  1:13                         ` [dpdk-dev] [PATCH v13 2/3] lib/gro: add TCP/IPv4 GRO support Jiayu Hu
2017-07-09  1:13                         ` [dpdk-dev] [PATCH v13 3/3] app/testpmd: enable TCP/IPv4 GRO Jiayu Hu
2017-07-09  5:46                         ` [dpdk-dev] [PATCH v14 0/3] Support TCP/IPv4 GRO in DPDK Jiayu Hu
2017-07-09  5:46                           ` [dpdk-dev] [PATCH v14 1/3] lib: add Generic Receive Offload API framework Jiayu Hu
2017-07-09  5:46                           ` [dpdk-dev] [PATCH v14 2/3] lib/gro: add TCP/IPv4 GRO support Jiayu Hu
2017-07-09  5:46                           ` [dpdk-dev] [PATCH v14 3/3] app/testpmd: enable TCP/IPv4 GRO Jiayu Hu
2017-07-09  7:59                             ` Yao, Lei A
2017-07-09 16:14                           ` [dpdk-dev] [PATCH v14 0/3] Support TCP/IPv4 GRO in DPDK Thomas Monjalon
2017-07-10  2:21                             ` Hu, Jiayu
2017-07-10  7:03                               ` Thomas Monjalon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=2DBBFF226F7CF64BAFCA79B681719D953A20CF33@shsmsx102.ccr.corp.intel.com \
    --to=lei.a.yao@intel.com \
    --cc=dev@dpdk.org \
    --cc=jianfeng.tan@intel.com \
    --cc=jiayu.hu@intel.com \
    --cc=keith.wiles@intel.com \
    --cc=konstantin.ananyev@intel.com \
    --cc=stephen@networkplumber.org \
    --cc=tiwei.bie@intel.com \
    --cc=yliu@fridaylinux.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).