From: Ferruh Yigit <ferruh.yigit@intel.com>
To: Thomas Monjalon <thomas.monjalon@6wind.com>,
Olivier Matz <olivier.matz@6wind.com>
Cc: dev@dpdk.org, konstantin.ananyev@intel.com,
bruce.richardson@intel.com, mb@smartsharesystems.com,
andrey.chilikin@intel.com, jblunck@infradead.org,
nelio.laranjeiro@6wind.com, arybchenko@solarflare.com,
jerin.jacob@caviumnetworks.com
Subject: Re: [dpdk-dev] [PATCH v2 0/8] mbuf: structure reorganization
Date: Fri, 14 Apr 2017 14:10:33 +0100 [thread overview]
Message-ID: <2ead9890-5759-5c31-1805-588967c7cbf2@intel.com> (raw)
In-Reply-To: <2948467.vjfs1XSdfO@xps13>
On 4/5/2017 10:37 AM, Thomas Monjalon wrote:
> 2017-04-04 18:27, Olivier Matz:
>> Based on discussions done in [1] and in this thread, this patchset reorganizes
>> the mbuf.
>>
>> The main changes are:
>> - reorder structure to increase vector performance on some non-ia
>> platforms.
>> - add a 64bits timestamp field in the 1st cache line. This timestamp
>> is not normalized, i.e. no unit or time reference is enforced. A
>> library may be added to do this job in the future.
>> - m->next, m->nb_segs, and m->refcnt are always initialized for mbufs
>> in the pool, avoiding the need of setting m->next (located in the
>> 2nd cache line) in the Rx path for mono-segment packets.
>> - change port and nb_segs to 16 bits
>> - move seqn in the 2nd cache line
>
> Applied, thanks for the long work
>
<...>
>> Once this patchset is pushed, the Rx path of drivers could be optimized a bit,
>> by removing writes to m->next, m->nb_segs and m->refcnt. The patch 4/8 gives an
>> idea of what could be done.
Hi Olivier,
Some driver patches already received for this update, but not all yet.
Can you please describe what changes are required in PMDs after this
patch? And what will be effect of doing changes or not?
Later we can circulate this information through the PMD maintainers to
be sure proper updates done.
Thanks,
ferruh
>
> Yes drivers patches are welcome :)
> Please target RC2 for these changes.
>
next prev parent reply other threads:[~2017-04-14 13:10 UTC|newest]
Thread overview: 155+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-24 15:19 [dpdk-dev] [RFC " Olivier Matz
2017-01-24 15:19 ` [dpdk-dev] [RFC 1/8] mbuf: make segment prefree function public Olivier Matz
2017-01-24 15:19 ` [dpdk-dev] [RFC 2/8] mbuf: make raw free " Olivier Matz
2017-01-24 15:19 ` [dpdk-dev] [RFC 3/8] mbuf: set mbuf fields while in pool Olivier Matz
2017-01-24 15:50 ` Bruce Richardson
2017-02-28 14:51 ` Olivier Matz
2017-01-24 15:19 ` [dpdk-dev] [RFC 4/8] net: don't touch mbuf next or nb segs on Rx Olivier Matz
2017-01-24 15:19 ` [dpdk-dev] [RFC 5/8] mbuf: make rearm data address naturally aligned Olivier Matz
2017-01-24 15:19 ` [dpdk-dev] [RFC 6/8] mbuf: use 2 bytes for port and nb segments Olivier Matz
2017-01-24 15:19 ` [dpdk-dev] [RFC 7/8] mbuf: move sequence number in second cache line Olivier Matz
2017-01-24 15:19 ` [dpdk-dev] [RFC 8/8] mbuf: add a timestamp field Olivier Matz
2017-01-24 15:59 ` [dpdk-dev] [RFC 0/8] mbuf: structure reorganization Bruce Richardson
2017-01-24 16:16 ` Olivier MATZ
2017-02-06 18:41 ` Ananyev, Konstantin
2017-02-09 16:20 ` Morten Brørup
2017-02-09 16:56 ` Ananyev, Konstantin
2017-02-16 13:48 ` Olivier Matz
2017-02-16 15:46 ` Bruce Richardson
2017-02-16 16:14 ` Olivier Matz
2017-02-21 14:20 ` Morten Brørup
2017-02-21 14:28 ` Bruce Richardson
2017-02-21 15:04 ` Olivier MATZ
2017-02-21 15:18 ` Bruce Richardson
2017-02-21 15:18 ` Morten Brørup
2017-02-19 19:04 ` Chilikin, Andrey
2017-02-21 9:53 ` Olivier MATZ
2017-02-16 17:26 ` Jan Blunck
2017-02-17 10:51 ` Olivier Matz
2017-02-17 12:49 ` Nélio Laranjeiro
2017-02-17 13:51 ` Jan Blunck
2017-02-18 5:48 ` Andrew Rybchenko
2017-02-17 13:38 ` Jan Blunck
2017-02-17 14:17 ` Olivier Matz
2017-02-17 18:42 ` Ananyev, Konstantin
2017-02-21 9:53 ` Olivier MATZ
2017-02-21 10:28 ` Ananyev, Konstantin
2017-02-20 9:27 ` Jan Blunck
2017-02-21 9:54 ` Olivier MATZ
2017-02-21 16:12 ` Jan Blunck
2017-02-21 16:38 ` Bruce Richardson
2017-02-21 17:04 ` Jan Blunck
2017-02-21 17:26 ` Ananyev, Konstantin
2017-02-21 19:17 ` Jan Blunck
2017-02-21 20:30 ` Ananyev, Konstantin
2017-02-21 21:51 ` Morten Brørup
2017-02-24 14:11 ` Olivier Matz
2017-02-24 14:00 ` Olivier Matz
2017-02-24 14:21 ` Bruce Richardson
2017-02-28 8:55 ` Jan Blunck
2017-02-28 9:05 ` Ananyev, Konstantin
2017-02-28 9:23 ` Olivier Matz
2017-02-28 9:33 ` Jan Blunck
2017-02-28 10:29 ` Ananyev, Konstantin
2017-02-28 10:50 ` Olivier Matz
2017-02-28 11:48 ` Ananyev, Konstantin
2017-02-28 12:28 ` Olivier Matz
2017-02-28 22:53 ` Ananyev, Konstantin
2017-03-02 16:46 ` Olivier Matz
2017-03-08 11:11 ` Ananyev, Konstantin
2017-03-20 9:00 ` Olivier Matz
2017-03-22 17:42 ` Ananyev, Konstantin
2017-03-24 8:35 ` Jerin Jacob
2017-03-24 13:35 ` Olivier Matz
2017-02-28 9:25 ` Jan Blunck
2017-02-19 23:45 ` Ananyev, Konstantin
2017-02-21 9:22 ` Morten Brørup
2017-02-21 9:54 ` Olivier MATZ
2017-03-08 9:41 ` [dpdk-dev] [PATCH 0/9] " Olivier Matz
2017-03-08 9:41 ` [dpdk-dev] [PATCH 1/9] mbuf: make segment prefree function public Olivier Matz
2017-03-08 9:41 ` [dpdk-dev] [PATCH 2/9] mbuf: make raw free " Olivier Matz
2017-03-08 9:41 ` [dpdk-dev] [PATCH 3/9] mbuf: set mbuf fields while in pool Olivier Matz
2017-03-31 11:21 ` Bruce Richardson
2017-03-31 11:51 ` Ananyev, Konstantin
2017-03-08 9:41 ` [dpdk-dev] [PATCH 4/9] drivers/net: don't touch mbuf next or nb segs on Rx Olivier Matz
2017-03-08 9:41 ` [dpdk-dev] [PATCH 5/9] mbuf: make rearm data address naturally aligned Olivier Matz
2017-03-08 9:41 ` [dpdk-dev] [PATCH 6/9] mbuf: use 2 bytes for port and nb segments Olivier Matz
2017-03-08 9:41 ` [dpdk-dev] [PATCH 7/9] mbuf: move sequence number in second cache line Olivier Matz
2017-03-08 9:42 ` [dpdk-dev] [PATCH 8/9] mbuf: add a timestamp field Olivier Matz
2017-04-04 10:29 ` [dpdk-dev] [PATCH 0/2] reduce writes to mbuf in ixgbe vRX Konstantin Ananyev
2017-04-07 15:13 ` Ferruh Yigit
2017-04-07 15:44 ` Ferruh Yigit
2017-04-09 22:56 ` Ananyev, Konstantin
2017-04-04 10:29 ` [dpdk-dev] [PATCH 1/2] net/ixgbe: eliminate mbuf write on rearm Konstantin Ananyev
2017-04-10 15:59 ` [dpdk-dev] [PATCH v2 0/2] reduce writes to mbuf in ixgbe vRX Konstantin Ananyev
2017-04-10 16:17 ` Ferruh Yigit
2017-04-10 15:59 ` [dpdk-dev] [PATCH v2 1/2] net/ixgbe: eliminate mbuf write on rearm Konstantin Ananyev
2017-04-10 15:59 ` [dpdk-dev] [PATCH v2 2/2] net/ixgbe: remove option to disable offload flags Konstantin Ananyev
2017-04-04 10:29 ` [dpdk-dev] [PATCH " Konstantin Ananyev
2017-03-08 9:42 ` [dpdk-dev] [PATCH 9/9] mbuf: reorder VLAN tci and buffer len fields Olivier Matz
2017-03-29 15:56 ` [dpdk-dev] [PATCH 0/9] mbuf: structure reorganization Olivier Matz
2017-03-29 16:03 ` Morten Brørup
2017-03-29 20:09 ` Bruce Richardson
2017-03-30 9:31 ` Bruce Richardson
2017-03-30 12:02 ` Olivier Matz
2017-03-30 12:23 ` Bruce Richardson
2017-03-30 16:45 ` Ananyev, Konstantin
2017-03-30 16:47 ` Ananyev, Konstantin
2017-03-30 18:06 ` Ananyev, Konstantin
2017-03-31 8:41 ` Olivier Matz
2017-03-31 9:58 ` Ananyev, Konstantin
2017-03-31 1:00 ` Ananyev, Konstantin
2017-03-31 7:21 ` Morten Brørup
2017-03-31 8:26 ` Olivier Matz
2017-03-31 8:41 ` Bruce Richardson
2017-03-31 8:59 ` Olivier Matz
2017-03-31 9:18 ` Ananyev, Konstantin
2017-03-31 9:36 ` Olivier Matz
2017-04-03 16:15 ` Thomas Monjalon
2017-04-04 7:58 ` Olivier MATZ
2017-04-04 8:53 ` Bruce Richardson
2017-03-31 9:23 ` Bruce Richardson
2017-03-31 11:18 ` Nélio Laranjeiro
2017-03-30 14:54 ` Andrew Rybchenko
2017-03-30 15:12 ` Jerin Jacob
2017-04-04 16:27 ` [dpdk-dev] [PATCH v2 0/8] " Olivier Matz
2017-04-04 16:28 ` [dpdk-dev] [PATCH v2 1/8] mbuf: make segment prefree function public Olivier Matz
2017-04-04 16:28 ` [dpdk-dev] [PATCH v2 2/8] mbuf: make raw free " Olivier Matz
2017-04-04 16:28 ` [dpdk-dev] [PATCH v2 3/8] mbuf: set mbuf fields while in pool Olivier Matz
2017-04-04 16:28 ` [dpdk-dev] [PATCH v2 4/8] drivers/net: don't touch mbuf next or nb segs on Rx Olivier Matz
2017-04-04 16:28 ` [dpdk-dev] [PATCH v2 5/8] mbuf: make rearm data address naturally aligned Olivier Matz
2017-04-04 16:28 ` [dpdk-dev] [PATCH v2 6/8] mbuf: use 2 bytes for port and nb segments Olivier Matz
2017-04-06 5:45 ` Yuanhan Liu
2017-04-18 13:03 ` Olivier MATZ
2017-07-04 7:54 ` Wang, Zhihong
2017-07-10 8:00 ` Olivier Matz
2017-07-10 8:15 ` Morten Brørup
2017-07-11 13:25 ` Wiles, Keith
2017-07-11 13:30 ` Morten Brørup
2017-07-11 15:05 ` Thomas Monjalon
2017-07-11 15:23 ` [dpdk-dev] [PATCH v2 6/8] mbuf: use 2 bytes for port and nbsegments Morten Brørup
2017-07-11 16:48 ` Wiles, Keith
2017-07-12 7:25 ` Morten Brørup
2017-07-12 9:02 ` Yang, Zhiyong
2017-07-12 9:50 ` [dpdk-dev] [PATCH v2 6/8] mbuf: use 2 bytes for port andnbsegments Morten Brørup
2017-07-12 15:35 ` Stephen Hemminger
2017-07-12 15:57 ` Morten Brørup
2017-07-12 16:23 ` Thomas Monjalon
2017-07-12 18:20 ` Wiles, Keith
2017-07-21 15:03 ` Bruce Richardson
2017-07-12 15:34 ` [dpdk-dev] [PATCH v2 6/8] mbuf: use 2 bytes for port and nbsegments Wiles, Keith
2017-07-11 13:34 ` [dpdk-dev] [PATCH v2 6/8] mbuf: use 2 bytes for port and nb segments Wiles, Keith
2017-07-11 13:46 ` Olivier MATZ
2017-04-04 16:28 ` [dpdk-dev] [PATCH v2 7/8] mbuf: move sequence number in second cache line Olivier Matz
2017-04-04 16:28 ` [dpdk-dev] [PATCH v2 8/8] mbuf: add a timestamp field Olivier Matz
2017-04-05 9:37 ` [dpdk-dev] [PATCH v2 0/8] mbuf: structure reorganization Thomas Monjalon
2017-04-05 9:46 ` Olivier MATZ
2017-04-05 9:48 ` Richardson, Bruce
2017-04-05 12:06 ` Ferruh Yigit
2017-04-14 13:10 ` Ferruh Yigit [this message]
2017-04-18 13:04 ` Olivier MATZ
2017-04-19 9:39 ` Thomas Monjalon
2017-04-19 12:28 ` Olivier MATZ
2017-04-19 12:56 ` Thomas Monjalon
2017-04-19 13:03 ` Ferruh Yigit
2017-04-19 13:12 ` Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2ead9890-5759-5c31-1805-588967c7cbf2@intel.com \
--to=ferruh.yigit@intel.com \
--cc=andrey.chilikin@intel.com \
--cc=arybchenko@solarflare.com \
--cc=bruce.richardson@intel.com \
--cc=dev@dpdk.org \
--cc=jblunck@infradead.org \
--cc=jerin.jacob@caviumnetworks.com \
--cc=konstantin.ananyev@intel.com \
--cc=mb@smartsharesystems.com \
--cc=nelio.laranjeiro@6wind.com \
--cc=olivier.matz@6wind.com \
--cc=thomas.monjalon@6wind.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).