From: "Kulasek, TomaszX" <tomaszx.kulasek@intel.com>
To: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Cc: "dev@dpdk.org" <dev@dpdk.org>
Subject: Re: [dpdk-dev] [PATCH 1/6] ethdev: add Tx preparation
Date: Thu, 8 Sep 2016 16:09:05 +0000 [thread overview]
Message-ID: <3042915272161B4EB253DA4D77EB373A14F050BA@IRSMSX102.ger.corp.intel.com> (raw)
In-Reply-To: <20160908072845.GA7333@localhost.localdomain>
Hi Jerin,
> -----Original Message-----
> From: Jerin Jacob [mailto:jerin.jacob@caviumnetworks.com]
> Sent: Thursday, September 8, 2016 09:29
> To: Kulasek, TomaszX <tomaszx.kulasek@intel.com>
> Cc: dev@dpdk.org
> Subject: Re: [dpdk-dev] [PATCH 1/6] ethdev: add Tx preparation
>
[...]
> > +static inline uint16_t
> > +rte_eth_tx_prep(uint8_t port_id, uint16_t queue_id, struct rte_mbuf
> **tx_pkts,
> > + uint16_t nb_pkts)
> > +{
> > + struct rte_eth_dev *dev = &rte_eth_devices[port_id];
> > +
> > + if (!dev->tx_pkt_prep) {
> > + rte_errno = -ENOTSUP;
>
> rte_errno update may not be necessary here. see below
>
> > + return 0;
> IMO, We should return "nb_pkts" here instead of 0(i.e, all the packets are
> valid in-case PMD does not have tx_prep function) and in-case of "0"
> the following check in the application also will fail for no reason if
> (nb_prep < nb_pkts) {
> printf("tx_prep failed\n");
> }
>
Yes, it seems to be reasonable.
>
> > + }
> > +
> > +#ifdef RTE_LIBRTE_ETHDEV_DEBUG
> > + if (queue_id >= dev->data->nb_tx_queues) {
> > + RTE_PMD_DEBUG_TRACE("Invalid TX queue_id=%d\n", queue_id);
> > + rte_errno = -EINVAL;
> > + return 0;
> > + }
> > +#endif
> > +
> > + return (*dev->tx_pkt_prep)(dev->data->tx_queues[queue_id],
> > + tx_pkts, nb_pkts);
> > +}
> > +
>
> IMO, We need to provide a compile time option for rte_eth_tx_prep as NOOP.
> Default option should be non NOOP but incase a _target_ want to override
> to NOOP it should be possible, the reasons is:
>
> - Low-end ARMv7,ARMv8 targets may not have PCIE-RC support and it may have
> only integrated NIC controller. On those targets, where integrated NIC
> controller does not use tx_prep service it can made it as NOOP to save
> cycles on following "rte_eth_tx_prep" and associated "if (unlikely(nb_prep
> < nb_rx))" checks in the application.
>
> /* Prepare burst of TX packets */
> nb_prep = rte_eth_tx_prep(fs->rx_port, 0, pkts_burst, nb_rx);
>
> if (unlikely(nb_prep < nb_rx)) {
> int i;
> for (i = nb_prep; i < nb_rx; i++)
> rte_pktmbuf_free(pkts_burst[i]); }
>
You mean to have a code for NOOP like:
/* Prepare burst of TX packets */
nb_prep = nb_rx; /* rte_eth_tx_prep(fs->rx_port, 0, pkts_burst, nb_rx); */
if (unlikely(nb_prep < nb_rx)) {
int i;
for (i = nb_prep; i < nb_rx; i++)
rte_pktmbuf_free(pkts_burst[i]); }
and let optimizer to remove unused parts?
IMHO it should be an application issue to use tx_prep or not.
While part of the job is done by the driver (verification and preparation), and part by application (error handling), such a global compile time option can introduce inconsistency, if application will not handle both cases.
If someone wants to turn off this functionality, it should be done on application level, e.g. with compilation option.
>
> Jerin
>
next prev parent reply other threads:[~2016-09-08 16:09 UTC|newest]
Thread overview: 260+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-26 16:22 [dpdk-dev] [PATCH 0/6] " Tomasz Kulasek
2016-08-26 16:22 ` [dpdk-dev] [PATCH 1/6] ethdev: " Tomasz Kulasek
2016-09-08 7:28 ` Jerin Jacob
2016-09-08 16:09 ` Kulasek, TomaszX [this message]
2016-09-09 5:58 ` Jerin Jacob
2016-08-26 16:22 ` [dpdk-dev] [PATCH 2/6] e1000: " Tomasz Kulasek
2016-08-26 16:22 ` [dpdk-dev] [PATCH 3/6] fm10k: " Tomasz Kulasek
2016-08-26 16:22 ` [dpdk-dev] [PATCH 4/6] i40e: " Tomasz Kulasek
2016-08-26 16:22 ` [dpdk-dev] [PATCH 5/6] ixgbe: " Tomasz Kulasek
2016-08-26 16:22 ` [dpdk-dev] [PATCH 6/6] testpmd: add txprep engine Tomasz Kulasek
2016-08-26 17:31 ` [dpdk-dev] [PATCH 0/6] add Tx preparation Stephen Hemminger
2016-08-31 12:34 ` Ananyev, Konstantin
2016-09-12 14:44 ` [dpdk-dev] [PATCH v2 " Tomasz Kulasek
2016-09-12 14:44 ` [dpdk-dev] [PATCH v2 1/6] ethdev: " Tomasz Kulasek
2016-09-19 13:03 ` Ananyev, Konstantin
2016-09-19 15:29 ` Kulasek, TomaszX
2016-09-19 16:06 ` Jerin Jacob
2016-09-20 9:06 ` Ananyev, Konstantin
2016-09-21 8:29 ` Jerin Jacob
2016-09-22 9:36 ` Ananyev, Konstantin
2016-09-22 9:59 ` Jerin Jacob
2016-09-23 9:41 ` Ananyev, Konstantin
2016-09-23 10:29 ` Jerin Jacob
2016-09-12 14:44 ` [dpdk-dev] [PATCH v2 2/6] e1000: " Tomasz Kulasek
2016-09-12 14:44 ` [dpdk-dev] [PATCH v2 3/6] fm10k: " Tomasz Kulasek
2016-09-12 14:44 ` [dpdk-dev] [PATCH v2 4/6] i40e: " Tomasz Kulasek
2016-09-12 14:44 ` [dpdk-dev] [PATCH v2 5/6] ixgbe: " Tomasz Kulasek
2016-09-19 12:54 ` Ananyev, Konstantin
2016-09-19 13:58 ` Kulasek, TomaszX
2016-09-19 15:23 ` Ananyev, Konstantin
2016-09-20 7:15 ` Ananyev, Konstantin
2016-09-12 14:44 ` [dpdk-dev] [PATCH v2 6/6] testpmd: add txprep engine Tomasz Kulasek
2016-09-19 12:59 ` Ananyev, Konstantin
2016-09-28 11:10 ` [dpdk-dev] [PATCH v3 0/6] add Tx preparation Tomasz Kulasek
2016-09-28 11:10 ` [dpdk-dev] [PATCH v3 1/6] ethdev: " Tomasz Kulasek
2016-09-29 10:40 ` Ananyev, Konstantin
2016-09-29 13:04 ` Kulasek, TomaszX
2016-09-29 13:57 ` Ananyev, Konstantin
2016-09-28 11:10 ` [dpdk-dev] [PATCH v3 2/6] e1000: " Tomasz Kulasek
2016-09-28 11:10 ` [dpdk-dev] [PATCH v3 3/6] fm10k: " Tomasz Kulasek
2016-09-28 11:10 ` [dpdk-dev] [PATCH v3 4/6] i40e: " Tomasz Kulasek
2016-09-28 11:10 ` [dpdk-dev] [PATCH v3 5/6] ixgbe: " Tomasz Kulasek
2016-09-29 11:09 ` Ananyev, Konstantin
2016-09-29 15:12 ` Kulasek, TomaszX
2016-09-29 17:01 ` Ananyev, Konstantin
2016-09-28 11:10 ` [dpdk-dev] [PATCH v3 6/6] testpmd: use Tx preparation in csum engine Tomasz Kulasek
2016-09-30 9:00 ` [dpdk-dev] [PATCH v4 0/6] add Tx preparation Tomasz Kulasek
2016-09-30 9:00 ` [dpdk-dev] [PATCH v4 1/6] ethdev: " Tomasz Kulasek
2016-10-10 14:08 ` Thomas Monjalon
2016-10-13 7:08 ` Thomas Monjalon
2016-10-13 10:47 ` Kulasek, TomaszX
2016-09-30 9:00 ` [dpdk-dev] [PATCH v4 2/6] e1000: " Tomasz Kulasek
2016-09-30 9:00 ` [dpdk-dev] [PATCH v4 3/6] fm10k: " Tomasz Kulasek
2016-09-30 9:00 ` [dpdk-dev] [PATCH v4 4/6] i40e: " Tomasz Kulasek
2016-10-10 14:02 ` Wu, Jingjing
2016-10-10 17:20 ` Kulasek, TomaszX
2016-09-30 9:00 ` [dpdk-dev] [PATCH v4 5/6] ixgbe: " Tomasz Kulasek
2016-09-30 9:00 ` [dpdk-dev] [PATCH v4 6/6] testpmd: use Tx preparation in csum engine Tomasz Kulasek
2016-09-30 9:55 ` [dpdk-dev] [PATCH v4 0/6] add Tx preparation Ananyev, Konstantin
2016-10-13 17:36 ` [dpdk-dev] [PATCH v5 " Tomasz Kulasek
2016-10-13 17:36 ` [dpdk-dev] [PATCH v5 1/6] ethdev: " Tomasz Kulasek
2016-10-13 19:21 ` Thomas Monjalon
2016-10-14 14:02 ` Kulasek, TomaszX
2016-10-14 14:20 ` Thomas Monjalon
2016-10-17 16:25 ` Kulasek, TomaszX
2016-10-13 17:36 ` [dpdk-dev] [PATCH v5 2/6] e1000: " Tomasz Kulasek
2016-10-13 17:36 ` [dpdk-dev] [PATCH v5 3/6] fm10k: " Tomasz Kulasek
2016-10-13 17:37 ` [dpdk-dev] [PATCH v5 4/6] i40e: " Tomasz Kulasek
2016-10-13 17:37 ` [dpdk-dev] [PATCH v5 5/6] ixgbe: " Tomasz Kulasek
2016-10-13 17:37 ` [dpdk-dev] [PATCH v5 6/6] testpmd: use Tx preparation in csum engine Tomasz Kulasek
2016-10-14 15:05 ` [dpdk-dev] [PATCH v6 0/6] add Tx preparation Tomasz Kulasek
2016-10-14 15:05 ` [dpdk-dev] [PATCH v6 1/6] ethdev: " Tomasz Kulasek
2016-10-18 14:57 ` Olivier Matz
2016-10-19 15:42 ` Kulasek, TomaszX
2016-10-19 22:07 ` Ananyev, Konstantin
2016-10-14 15:05 ` [dpdk-dev] [PATCH v6 2/6] e1000: " Tomasz Kulasek
2016-10-14 15:05 ` [dpdk-dev] [PATCH v6 3/6] fm10k: " Tomasz Kulasek
2016-10-14 15:05 ` [dpdk-dev] [PATCH v6 4/6] i40e: " Tomasz Kulasek
2016-10-14 15:05 ` [dpdk-dev] [PATCH v6 5/6] ixgbe: " Tomasz Kulasek
2016-10-14 15:05 ` [dpdk-dev] [PATCH v6 6/6] testpmd: use Tx preparation in csum engine Tomasz Kulasek
2016-10-18 12:28 ` [dpdk-dev] [PATCH v6 0/6] add Tx preparation Ananyev, Konstantin
2016-10-21 13:42 ` [dpdk-dev] [PATCH v7 " Tomasz Kulasek
2016-10-21 13:42 ` [dpdk-dev] [PATCH v7 1/6] ethdev: " Tomasz Kulasek
2016-10-21 13:42 ` [dpdk-dev] [PATCH v7 2/6] e1000: " Tomasz Kulasek
2016-10-21 13:42 ` [dpdk-dev] [PATCH v7 3/6] fm10k: " Tomasz Kulasek
2016-10-21 13:42 ` [dpdk-dev] [PATCH v7 4/6] i40e: " Tomasz Kulasek
2016-10-21 13:42 ` [dpdk-dev] [PATCH v7 5/6] ixgbe: " Tomasz Kulasek
2016-10-21 13:42 ` [dpdk-dev] [PATCH v7 6/6] testpmd: use Tx preparation in csum engine Tomasz Kulasek
2016-10-21 14:46 ` [dpdk-dev] [PATCH v8 0/6] add Tx preparation Tomasz Kulasek
2016-10-21 14:46 ` [dpdk-dev] [PATCH v8 1/6] ethdev: " Tomasz Kulasek
2016-10-24 12:14 ` Ananyev, Konstantin
2016-10-24 12:49 ` Kulasek, TomaszX
2016-10-24 12:56 ` Ananyev, Konstantin
2016-10-24 14:12 ` Kulasek, TomaszX
2016-10-21 14:46 ` [dpdk-dev] [PATCH v8 2/6] e1000: " Tomasz Kulasek
2016-10-21 14:46 ` [dpdk-dev] [PATCH v8 3/6] fm10k: " Tomasz Kulasek
2016-10-21 14:46 ` [dpdk-dev] [PATCH v8 4/6] i40e: " Tomasz Kulasek
2016-10-21 14:46 ` [dpdk-dev] [PATCH v8 5/6] ixgbe: " Tomasz Kulasek
2016-10-21 14:46 ` [dpdk-dev] [PATCH v8 6/6] testpmd: use Tx preparation in csum engine Tomasz Kulasek
2016-10-24 14:05 ` [dpdk-dev] [PATCH v9 0/6] add Tx preparation Tomasz Kulasek
2016-10-24 14:05 ` [dpdk-dev] [PATCH v9 1/6] ethdev: " Tomasz Kulasek
2016-10-24 14:05 ` [dpdk-dev] [PATCH v9 2/6] e1000: " Tomasz Kulasek
2016-10-24 14:05 ` [dpdk-dev] [PATCH v9 3/6] fm10k: " Tomasz Kulasek
2016-10-24 14:05 ` [dpdk-dev] [PATCH v9 4/6] i40e: " Tomasz Kulasek
2016-10-24 14:05 ` [dpdk-dev] [PATCH v9 5/6] ixgbe: " Tomasz Kulasek
2016-10-24 14:05 ` [dpdk-dev] [PATCH v9 6/6] testpmd: use Tx preparation in csum engine Tomasz Kulasek
2016-10-24 16:51 ` [dpdk-dev] [PATCH v10 0/6] add Tx preparation Tomasz Kulasek
2016-10-24 16:51 ` [dpdk-dev] [PATCH v10 1/6] ethdev: " Tomasz Kulasek
2016-10-25 14:41 ` Olivier Matz
2016-10-25 17:28 ` Kulasek, TomaszX
2016-10-24 16:51 ` [dpdk-dev] [PATCH v10 2/6] e1000: " Tomasz Kulasek
2016-10-24 16:51 ` [dpdk-dev] [PATCH v10 3/6] fm10k: " Tomasz Kulasek
2016-10-24 16:51 ` [dpdk-dev] [PATCH v10 4/6] i40e: " Tomasz Kulasek
2016-10-24 16:51 ` [dpdk-dev] [PATCH v10 5/6] ixgbe: " Tomasz Kulasek
2016-10-24 16:51 ` [dpdk-dev] [PATCH v10 6/6] testpmd: use Tx preparation in csum engine Tomasz Kulasek
2016-10-24 17:26 ` [dpdk-dev] [PATCH v10 0/6] add Tx preparation Ananyev, Konstantin
2016-10-26 12:56 ` [dpdk-dev] [PATCH v11 " Tomasz Kulasek
2016-10-26 12:56 ` [dpdk-dev] [PATCH v11 1/6] ethdev: " Tomasz Kulasek
2016-10-27 12:38 ` Olivier Matz
2016-10-27 15:01 ` Thomas Monjalon
2016-10-27 15:52 ` Ananyev, Konstantin
2016-10-27 16:02 ` Thomas Monjalon
2016-10-27 16:24 ` Ananyev, Konstantin
2016-10-27 16:39 ` Thomas Monjalon
2016-10-28 11:29 ` Ananyev, Konstantin
2016-10-28 11:34 ` Ananyev, Konstantin
2016-10-28 12:23 ` Thomas Monjalon
2016-10-28 12:59 ` Ananyev, Konstantin
2016-10-28 13:42 ` Thomas Monjalon
2016-11-01 12:57 ` Ananyev, Konstantin
2016-11-04 11:35 ` Thomas Monjalon
2016-10-27 16:39 ` Kulasek, TomaszX
2016-10-28 10:15 ` Ananyev, Konstantin
2016-10-28 10:22 ` Kulasek, TomaszX
2016-10-28 10:22 ` Thomas Monjalon
2016-10-28 10:28 ` Ananyev, Konstantin
2016-10-28 11:02 ` Richardson, Bruce
2016-10-28 11:14 ` Jerin Jacob
2016-10-27 16:29 ` Kulasek, TomaszX
2016-10-26 12:56 ` [dpdk-dev] [PATCH v11 2/6] e1000: " Tomasz Kulasek
2016-10-26 12:56 ` [dpdk-dev] [PATCH v11 3/6] fm10k: " Tomasz Kulasek
2016-10-26 12:56 ` [dpdk-dev] [PATCH v11 4/6] i40e: " Tomasz Kulasek
2016-10-26 12:56 ` [dpdk-dev] [PATCH v11 5/6] ixgbe: " Tomasz Kulasek
2016-10-26 12:56 ` [dpdk-dev] [PATCH v11 6/6] testpmd: use Tx preparation in csum engine Tomasz Kulasek
2016-11-23 17:36 ` [dpdk-dev] [PATCH v12 0/6] add Tx preparation Tomasz Kulasek
2016-11-23 17:36 ` [dpdk-dev] [PATCH v12 1/6] ethdev: " Tomasz Kulasek
2016-11-28 10:54 ` Thomas Monjalon
2016-12-01 16:24 ` Thomas Monjalon
2016-12-01 19:20 ` Kulasek, TomaszX
2016-12-01 19:52 ` Thomas Monjalon
2016-12-01 21:56 ` Jerin Jacob
2016-12-01 22:31 ` Kulasek, TomaszX
2016-12-01 23:50 ` Thomas Monjalon
2016-12-09 13:25 ` Kulasek, TomaszX
2016-12-02 0:10 ` Ananyev, Konstantin
2016-12-22 13:14 ` Thomas Monjalon
2016-12-22 13:37 ` Jerin Jacob
2016-12-01 16:26 ` Thomas Monjalon
2016-12-01 16:28 ` Thomas Monjalon
2016-12-02 1:06 ` Ananyev, Konstantin
2016-12-02 8:24 ` Olivier Matz
2016-12-02 16:17 ` Ananyev, Konstantin
2016-12-08 17:24 ` Olivier Matz
2016-12-09 17:19 ` Kulasek, TomaszX
2016-12-12 11:51 ` Ananyev, Konstantin
2016-12-22 13:30 ` Thomas Monjalon
2016-12-22 14:11 ` Ananyev, Konstantin
2016-11-23 17:36 ` [dpdk-dev] [PATCH v12 2/6] e1000: " Tomasz Kulasek
2016-11-23 17:36 ` [dpdk-dev] [PATCH v12 3/6] fm10k: " Tomasz Kulasek
2016-11-23 17:36 ` [dpdk-dev] [PATCH v12 4/6] i40e: " Tomasz Kulasek
2016-11-23 17:36 ` [dpdk-dev] [PATCH v12 5/6] ixgbe: " Tomasz Kulasek
2016-11-23 17:36 ` [dpdk-dev] [PATCH v12 6/6] testpmd: use Tx preparation in csum engine Tomasz Kulasek
2016-12-07 11:13 ` Ferruh Yigit
2016-12-07 12:00 ` Mcnamara, John
2016-12-07 12:12 ` Kulasek, TomaszX
2016-12-07 12:49 ` Ananyev, Konstantin
2016-12-07 12:00 ` Kulasek, TomaszX
2016-11-28 11:03 ` [dpdk-dev] [PATCH v12 0/6] add Tx preparation Thomas Monjalon
2016-11-30 5:48 ` John Daley (johndale)
2016-11-30 10:59 ` Ananyev, Konstantin
2016-11-30 7:40 ` Adrien Mazarguil
2016-11-30 8:50 ` Thomas Monjalon
2016-11-30 10:30 ` Kulasek, TomaszX
2016-12-01 7:19 ` Adrien Mazarguil
2016-11-30 10:54 ` Ananyev, Konstantin
2016-12-01 7:15 ` Adrien Mazarguil
2016-12-01 8:58 ` Thomas Monjalon
2016-12-01 22:03 ` Jerin Jacob
2016-12-02 1:00 ` Ananyev, Konstantin
2016-12-05 15:03 ` Adrien Mazarguil
2016-12-05 16:43 ` Ananyev, Konstantin
2016-12-05 18:10 ` Adrien Mazarguil
2016-12-06 10:56 ` Ananyev, Konstantin
2016-12-06 13:59 ` Adrien Mazarguil
2016-12-06 20:31 ` Ananyev, Konstantin
2016-12-07 10:08 ` Adrien Mazarguil
2016-11-30 16:34 ` Harish Patil
2016-11-30 17:42 ` Ananyev, Konstantin
2016-11-30 18:26 ` Thomas Monjalon
2016-11-30 21:01 ` Jerin Jacob
2016-12-01 10:50 ` Ferruh Yigit
2016-12-02 23:55 ` Yong Wang
2016-12-04 12:11 ` Ananyev, Konstantin
2016-12-06 18:25 ` Yong Wang
2016-12-07 9:57 ` Ferruh Yigit
2016-12-07 10:03 ` Ananyev, Konstantin
2016-12-07 14:31 ` Alejandro Lucero
2016-12-08 18:20 ` Yong Wang
2016-12-09 14:40 ` Jan Mędala
2016-12-12 15:02 ` Ananyev, Konstantin
2016-12-16 0:15 ` Ananyev, Konstantin
2016-12-16 13:53 ` Jan Mędala
2016-12-16 15:27 ` Ananyev, Konstantin
2016-12-16 15:37 ` Jan Mędala
2016-12-12 17:29 ` Ananyev, Konstantin
2016-11-30 18:39 ` Harish Patil
2016-11-30 19:37 ` Ajit Khaparde
2016-12-01 8:24 ` Rahul Lakkireddy
2016-12-06 15:53 ` Ferruh Yigit
2016-12-07 7:55 ` Andrew Rybchenko
2016-12-07 8:11 ` Yuanhan Liu
2016-12-07 10:13 ` Ananyev, Konstantin
2016-12-07 10:18 ` Yuanhan Liu
2016-12-07 10:22 ` Ananyev, Konstantin
2016-12-13 11:59 ` Ferruh Yigit
2016-12-13 17:41 ` [dpdk-dev] [PATCH v13 0/7] " Tomasz Kulasek
2016-12-13 17:41 ` [dpdk-dev] [PATCH v13 1/7] ethdev: " Tomasz Kulasek
2016-12-13 17:41 ` [dpdk-dev] [PATCH v13 2/7] e1000: " Tomasz Kulasek
2016-12-13 17:41 ` [dpdk-dev] [PATCH v13 3/7] fm10k: " Tomasz Kulasek
2016-12-13 17:41 ` [dpdk-dev] [PATCH v13 4/7] i40e: " Tomasz Kulasek
2016-12-13 17:41 ` [dpdk-dev] [PATCH v13 5/7] ixgbe: " Tomasz Kulasek
2016-12-13 17:41 ` [dpdk-dev] [PATCH v13 6/7] vmxnet3: " Tomasz Kulasek
2016-12-13 18:15 ` Yong Wang
2016-12-20 13:36 ` Ferruh Yigit
2016-12-22 13:10 ` Thomas Monjalon
2016-12-13 17:41 ` [dpdk-dev] [PATCH v13 7/7] testpmd: use Tx preparation in csum engine Tomasz Kulasek
2016-12-22 13:05 ` [dpdk-dev] [PATCH v14 0/8] add Tx preparation Tomasz Kulasek
2016-12-22 13:05 ` [dpdk-dev] [PATCH v14 1/8] ethdev: " Tomasz Kulasek
2016-12-22 14:24 ` Thomas Monjalon
2016-12-23 18:49 ` Kulasek, TomaszX
2016-12-22 13:05 ` [dpdk-dev] [PATCH v14 2/8] e1000: " Tomasz Kulasek
2016-12-22 13:05 ` [dpdk-dev] [PATCH v14 3/8] fm10k: " Tomasz Kulasek
2016-12-22 13:05 ` [dpdk-dev] [PATCH v14 4/8] i40e: " Tomasz Kulasek
2016-12-22 13:05 ` [dpdk-dev] [PATCH v14 5/8] ixgbe: " Tomasz Kulasek
2016-12-22 13:05 ` [dpdk-dev] [PATCH v14 6/8] vmxnet3: " Tomasz Kulasek
2016-12-22 17:59 ` Yong Wang
2016-12-22 13:05 ` [dpdk-dev] [PATCH v14 7/8] ena: " Tomasz Kulasek
2016-12-22 13:05 ` [dpdk-dev] [PATCH v14 8/8] testpmd: use Tx preparation in csum engine Tomasz Kulasek
2016-12-22 14:28 ` Thomas Monjalon
2016-12-23 18:40 ` [dpdk-dev] [PATCH v15 0/8] add Tx preparation Tomasz Kulasek
2016-12-23 18:40 ` [dpdk-dev] [PATCH v15 1/8] ethdev: " Tomasz Kulasek
2016-12-23 18:40 ` [dpdk-dev] [PATCH v15 2/8] e1000: " Tomasz Kulasek
2016-12-23 18:40 ` [dpdk-dev] [PATCH v15 3/8] fm10k: " Tomasz Kulasek
2016-12-23 18:40 ` [dpdk-dev] [PATCH v15 4/8] i40e: " Tomasz Kulasek
2016-12-23 18:40 ` [dpdk-dev] [PATCH v15 5/8] ixgbe: " Tomasz Kulasek
2016-12-23 18:40 ` [dpdk-dev] [PATCH v15 6/8] vmxnet3: " Tomasz Kulasek
2016-12-23 18:40 ` [dpdk-dev] [PATCH v15 7/8] ena: " Tomasz Kulasek
2016-12-23 18:40 ` [dpdk-dev] [PATCH v15 8/8] testpmd: use Tx preparation in csum engine Tomasz Kulasek
2017-01-04 19:41 ` [dpdk-dev] [PATCH v15 0/8] add Tx preparation Thomas Monjalon
2017-01-05 15:43 ` Avi Kivity
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3042915272161B4EB253DA4D77EB373A14F050BA@IRSMSX102.ger.corp.intel.com \
--to=tomaszx.kulasek@intel.com \
--cc=dev@dpdk.org \
--cc=jerin.jacob@caviumnetworks.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).