From: "Guo, Jia" <jia.guo@intel.com>
To: "Gaëtan Rivet" <gaetan.rivet@6wind.com>
Cc: stephen@networkplumber.org, bruce.richardson@intel.com,
ferruh.yigit@intel.com, konstantin.ananyev@intel.com,
jingjing.wu@intel.com, thomas@monjalon.net, motih@mellanox.com,
matan@mellanox.com, harry.van.haaren@intel.com,
qi.z.zhang@intel.com, shaopeng.he@intel.com,
jblunck@infradead.org, shreyansh.jain@nxp.com, dev@dpdk.org,
helin.zhang@intel.com
Subject: Re: [dpdk-dev] [PATCH v2 1/4] bus/pci: handle device hot unplug
Date: Tue, 26 Jun 2018 23:30:00 +0800 [thread overview]
Message-ID: <3cc2fd5f-48b9-7d0b-e942-1716b0622462@intel.com> (raw)
In-Reply-To: <20180622125908.r5r7qvvndn4dp6ln@bidouze.vm.6wind.com>
hi, gaetan,
thanks for your review, see comment as bellow
On 6/22/2018 8:59 PM, Gaëtan Rivet wrote:
> Hi Jeff,
>
> Sorry, I followed this development from afar,
> I have a remark regarding this API, I think it can be made simpler.
> Details below.
>
> On Fri, Jun 22, 2018 at 07:51:05PM +0800, Jeff Guo wrote:
>> When a hardware device is removed physically or the software disables
>> it, the hot unplug occur. App need to call ether dev API to detach the
>> device, to unplug the device at the bus level and make access to the device
>> invalid. But the problem is that, the removal of the device from the
>> software lists is not going to be instantaneous, at this time if the data
>> path still read/write the device, it will cause MMIO error and result of
>> the app crash out. So a hot unplug handle mechanism need to guaranty app
>> will not crash out when hot unplug device.
>>
>> To handle device hot unplug is bus-specific behavior, this patch introduces
>> a bus ops so that each kind of bus can implement its own logic. Further,
>> this patch implements the ops for PCI bus: remap a dummy memory to avoid
>> bus read/write error.
>>
>> Signed-off-by: Jeff Guo <jia.guo@intel.com>
>> ---
>> v2->v1(v21):
>> refind commit log
>> ---
>> drivers/bus/pci/pci_common.c | 65 +++++++++++++++++++++++++++++++++
>> drivers/bus/pci/pci_common_uio.c | 33 +++++++++++++++++
>> drivers/bus/pci/private.h | 12 ++++++
>> lib/librte_eal/common/include/rte_bus.h | 16 ++++++++
>> 4 files changed, 126 insertions(+)
>>
>> diff --git a/drivers/bus/pci/pci_common.c b/drivers/bus/pci/pci_common.c
>> index 7215aae..74d9aa8 100644
>> --- a/drivers/bus/pci/pci_common.c
>> +++ b/drivers/bus/pci/pci_common.c
>> @@ -472,6 +472,70 @@ pci_find_device(const struct rte_device *start, rte_dev_cmp_t cmp,
>> return NULL;
>> }
>>
>> +static struct rte_pci_device *
>> +pci_find_device_by_addr(void *failure_addr)
>> +{
>> + struct rte_pci_device *pdev = NULL;
>> + int i;
>> +
>> + FOREACH_DEVICE_ON_PCIBUS(pdev) {
>> + for (i = 0; i != RTE_DIM(pdev->mem_resource); i++) {
>> + if ((uint64_t)(uintptr_t)failure_addr >=
>> + (uint64_t)(uintptr_t)pdev->mem_resource[i].addr &&
>> + (uint64_t)(uintptr_t)failure_addr <
>> + (uint64_t)(uintptr_t)pdev->mem_resource[i].addr +
>> + pdev->mem_resource[i].len) {
>> + RTE_LOG(ERR, EAL, "Failure address "
>> + "%16.16"PRIx64" belongs to "
>> + "device %s!\n",
>> + (uint64_t)(uintptr_t)failure_addr,
>> + pdev->device.name);
>> + return pdev;
>> + }
>> + }
>> + }
>> + return NULL;
>> +}
> You define here a new bus ops that takes either an rte_device or an
> arbitrary address as input.
>
> In the uev handler that would call this ops afterward, you similarly try
> to find either a bus using the device name, or then iterate over all
> buses and try to find one able to handle the error.
>
> This seems redundant and prone to ambiguity: should one check that the
> device address is actually linked with the provided address? If not, is
> it an improper call or a special case? This is unclear.
>
> Note: I haven't followed the previous discussion, maybe the
> dual dev_addr + failure_addr is warranted in the API here,
> if so why not. Otherwise it just seems redundant:
> the dev addr will never be within a physical BAR mapping,
> and for all buses / drivers not using physical mappings,
> the addr is only meaningful as a cue to find an internal
> resource.
>
> You can use the bus->find_device() to iterate over buses, and design
> your bus ops such that when provided with an addr, would do whatever it
> needs internally to find a relevant resource and either handle the
> error, or return that the error was not handled.
if bus->find_device() can make think more simpler, why not? i will check
that and modify it.
> Something like that:
>
> /* new bus ops: */
> /* If generic error codes are defined as part of the API,
> >0 should mean that the sigbus was not handled,
> <0 that an error occured but that one should stop trying,
> 0 that everything is ok.
> */
> int (*handle_sigbus)(void *addr);
>
> /* new rte_bus API: */
>
> static int
> bus_handle_sigbus(const struct rte_bus *bus,
> const void *addr)
> {
> /* If additional error codes are defined as part of the API,
> negative values should stop the iteration.
> In this case, rte_errno would need to be set as well.
> */
> return !(bus->handle_sigbus && bus->handle_sigbus(addr) <= 0);
> }
>
> int
> rte_bus_sigbus_handler(void *addr)
> {
> struct rte_bus *bus;
> int old_errno = rte_errno;
>
> rte_errno = 0;
> bus = rte_bus_find(NULL, bus_handle_sigbus, addr);
> if (bus == NULL) {
> /* ERROR: no bus could handle the error. */
> RTE_LOG(ERR, EAL, "No bus was able to handle the error");
> return -1;
> } else if {rte_errno != 0) {
> /* ERROR: a generic sigbus handling error. */
> RTE_LOG(ERR, EAL, "Say what the error is");
> return -1;
> }
> rte_errno = old_errno;
> return 0;
> }
>
> Which would afterward be implemented, for example in PCI bus:
>
> static rte_pci_device *
> pci_find_device_by_addr(void *addr)
> {
> struct rte_pci_device *pdev;
>
> FOREACH_DEVICE_ON_PCIBUS(pdev)
> if (&pdev->device == addr ||
> /* addr within mappings of pdev */)
> return pdev;
> return NULL;
> }
>
> static int
> pci_handle_sigbus(void *addr)
> {
> static rte_pci_device *pdev;
>
> pdev = pci_find_device_by_addr(addr);
> if (pdev == NULL)
> return -1;
> /* Here, handle uio remap if needed. */
> }
>
> -------------------------
>
> - Leave the bus iteration and check within rte_bus. Centralize the call
> in a tighter rte_bus API, do not use directly your OPS from your other
> EAL facility.
>
> - You have left several error messages for signaling success (!), or
> even simply that a bus could not handle a specific address. This is
> bad. An error should only appear on error. Otherwise, all of this can
> easily be traced using a debugger, so I don't think it's necessary
> to leave it at a DEBUG level.
>
> But in any case, remove all ERR-level messages for success.
make sense. i will check which debug message is no need at least.
> <...>
>
>> diff --git a/lib/librte_eal/common/include/rte_bus.h b/lib/librte_eal/common/include/rte_bus.h
>> index eb9eded..6a5609f 100644
>> --- a/lib/librte_eal/common/include/rte_bus.h
>> +++ b/lib/librte_eal/common/include/rte_bus.h
>> @@ -168,6 +168,20 @@ typedef int (*rte_bus_unplug_t)(struct rte_device *dev);
>> typedef int (*rte_bus_parse_t)(const char *name, void *addr);
>>
>> /**
>> + * Implementation a specific hot unplug handler, which is responsible
>> + * for handle the failure when hot unplug the device, guaranty the system
>> + * would not hung in the case.
>> + * @param dev
>> + * Pointer of the device structure.
>> + *
>> + * @return
>> + * 0 on success.
>> + * !0 on error.
>> + */
>> +typedef int (*rte_bus_handle_hot_unplug_t)(struct rte_device *dev,
>> + void *dev_addr);
>> +
> I don't like the name of the OPS.
> The documentation evokes only "the failure".
> So is it a handle for any and all error possibly happening to a device?
> If so, where is the input to describe the error?
> If it is only meant to handle SIGBUS, because it is a very specific
> error state only meant to happen on certain parts of the bus (the queue
> mappings, if relevant), then it makes sense to only have an arbitrary
> address as context for handling.
>
> But then, it needs to be called as such. The expected failure to be
> handled should be explicit in the name of the ops, and the documentation
> should be more precise about what a bus developper should do with the
> input.
I agree with your point of let the name more explicit, but i think here
maybe we should spit it into two ops, the one is hotplug_handler, the
other is sigbus_handler, because there are
2 path that both, data path and control path, they are also need to call
remap function when detect the hot remove event,even there are no sigbus
happen.
>> +/**
>> * Bus scan policies
>> */
>> enum rte_bus_scan_mode {
>> @@ -209,6 +223,8 @@ struct rte_bus {
>> rte_bus_plug_t plug; /**< Probe single device for drivers */
>> rte_bus_unplug_t unplug; /**< Remove single device from driver */
>> rte_bus_parse_t parse; /**< Parse a device name */
>> + rte_bus_handle_hot_unplug_t handle_hot_unplug; /**< handle hot unplug
>> + device event */
> The new ops should be added at the end of the structure.
ok.
> Regards,
next prev parent reply other threads:[~2018-06-26 15:30 UTC|newest]
Thread overview: 494+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-05-28 15:44 [dpdk-dev] [RFC] Add hot plug event in rte eal interrupt and inplement it in i40e driver Jeff Guo
2017-05-30 7:14 ` Gaëtan Rivet
2017-06-07 7:40 ` Wu, Jingjing
2017-06-15 21:22 ` Gaëtan Rivet
2017-06-21 2:50 ` Guo, Jia
2017-06-29 17:27 ` Stephen Hemminger
2017-06-30 3:36 ` Wu, Jingjing
2017-06-07 7:27 ` Wu, Jingjing
2017-06-28 11:07 ` [dpdk-dev] [PATCH v2 1/2] eal: add uevent api for hot plug Jeff Guo
2017-06-28 11:07 ` [dpdk-dev] [PATCH v2 2/2] net/i40e: add hot plug monitor in i40e Jeff Guo
2017-06-29 1:41 ` Wu, Jingjing
2017-06-29 4:31 ` Guo, Jia
2017-06-29 3:34 ` Stephen Hemminger
2017-06-29 4:48 ` Wu, Jingjing
2017-06-29 7:47 ` Guo, Jia
2017-06-29 4:37 ` [dpdk-dev] [PATCH v3 0/2] add uevent api for hot plug Jeff Guo
2017-06-29 4:37 ` [dpdk-dev] [PATCH v3 1/2] eal: " Jeff Guo
2017-06-30 3:38 ` Wu, Jingjing
2017-06-29 4:37 ` [dpdk-dev] [PATCH v3 2/2] net/i40e: add hot plug monitor in i40e Jeff Guo
2017-06-30 3:38 ` Wu, Jingjing
2018-04-13 8:30 ` [dpdk-dev] [PATCH V22 0/4] add device event monitor framework Jeff Guo
2018-04-13 8:30 ` [dpdk-dev] [PATCH V22 1/4] eal: add device event handle in interrupt thread Jeff Guo
2018-04-13 8:30 ` [dpdk-dev] [PATCH V22 2/4] eal: add device event monitor framework Jeff Guo
2018-04-13 8:30 ` [dpdk-dev] [PATCH V22 3/4] eal/linux: uevent parse and process Jeff Guo
2018-04-13 8:30 ` [dpdk-dev] [PATCH V22 4/4] app/testpmd: enable device hotplug monitoring Jeff Guo
2018-04-13 10:03 ` [dpdk-dev] [PATCH V22 0/4] add device event monitor framework Thomas Monjalon
2018-04-18 13:38 ` [dpdk-dev] [PATCH V20 0/4] add hot plug recovery mechanism Jeff Guo
2018-04-18 13:38 ` [dpdk-dev] [PATCH V20 1/4] bus/pci: introduce device hot unplug handle Jeff Guo
2018-04-20 10:32 ` Ananyev, Konstantin
2018-05-03 3:05 ` Guo, Jia
2018-04-18 13:38 ` [dpdk-dev] [PATCH V20 2/4] eal: add failure handler mechanism for hot plug Jeff Guo
2018-04-19 1:30 ` Zhang, Qi Z
2018-04-20 11:14 ` Ananyev, Konstantin
2018-05-03 3:13 ` Guo, Jia
2018-04-20 16:16 ` Ananyev, Konstantin
2018-05-03 3:17 ` Guo, Jia
2018-04-18 13:38 ` [dpdk-dev] [PATCH V20 3/4] igb_uio: fix uio release issue when hot unplug Jeff Guo
2018-04-18 13:38 ` [dpdk-dev] [PATCH V20 4/4] app/testpmd: show example to handler " Jeff Guo
2018-05-03 7:25 ` Matan Azrad
2018-05-03 9:35 ` Guo, Jia
2018-05-03 11:27 ` Matan Azrad
2018-05-03 8:57 ` [dpdk-dev] [PATCH V21 0/4] hot plug recovery mechanism Jeff Guo
2018-05-03 8:57 ` [dpdk-dev] [PATCH V21 1/4] bus/pci: handle device hot unplug Jeff Guo
2018-05-03 8:57 ` [dpdk-dev] [PATCH V21 2/4] eal: add failure handle mechanism for hot plug Jeff Guo
2018-05-03 8:57 ` [dpdk-dev] [PATCH V21 3/4] igb_uio: fix uio release issue when hot unplug Jeff Guo
2018-05-03 8:57 ` [dpdk-dev] [PATCH V21 4/4] app/testpmd: show example to handle " Jeff Guo
2018-05-16 14:30 ` Iremonger, Bernard
2018-05-03 10:48 ` [dpdk-dev] [PATCH V21 0/4] hot plug recovery mechanism Jeff Guo
2018-05-03 10:48 ` [dpdk-dev] [PATCH V21 1/4] bus/pci: handle device hot unplug Jeff Guo
2018-05-03 10:48 ` [dpdk-dev] [PATCH V21 2/4] eal: add failure handle mechanism for hot plug Jeff Guo
2018-05-04 15:56 ` Ananyev, Konstantin
2018-05-08 14:57 ` Guo, Jia
2018-05-08 15:19 ` Ananyev, Konstantin
2018-05-03 10:48 ` [dpdk-dev] [PATCH V21 3/4] igb_uio: fix uio release issue when hot unplug Jeff Guo
2018-05-03 10:48 ` [dpdk-dev] [PATCH V21 4/4] app/testpmd: show example to handle " Jeff Guo
2018-06-14 12:59 ` Iremonger, Bernard
2018-06-15 8:32 ` Guo, Jia
2018-06-22 11:51 ` [dpdk-dev] [PATCH v2 0/4] hot plug failure handle mechanism Jeff Guo
2018-06-22 11:51 ` [dpdk-dev] [PATCH v2 1/4] bus/pci: handle device hot unplug Jeff Guo
2018-06-22 12:59 ` Gaëtan Rivet
2018-06-26 15:30 ` Guo, Jia [this message]
2018-06-22 11:51 ` [dpdk-dev] [PATCH v2 2/4] eal: add failure handle mechanism for hot plug Jeff Guo
2018-06-22 11:51 ` [dpdk-dev] [PATCH v2 3/4] igb_uio: fix uio release issue when hot unplug Jeff Guo
2018-06-22 11:51 ` [dpdk-dev] [PATCH v2 4/4] app/testpmd: show example to handle " Jeff Guo
2018-06-26 10:06 ` Iremonger, Bernard
2018-06-26 11:58 ` Matan Azrad
2018-06-26 15:33 ` Guo, Jia
2018-06-26 15:36 ` [dpdk-dev] [PATCH V3 1/4] bus/pci: handle device " Jeff Guo
2018-06-26 15:36 ` [dpdk-dev] [PATCH V3 2/4] eal: add failure handle mechanism for hot plug Jeff Guo
2018-06-26 15:36 ` [dpdk-dev] [PATCH V3 3/4] igb_uio: fix uio release issue when hot unplug Jeff Guo
2018-06-26 15:36 ` [dpdk-dev] [PATCH V3 4/4] app/testpmd: show example to handle " Jeff Guo
2018-06-26 17:07 ` Matan Azrad
2018-06-27 3:56 ` Guo, Jia
2018-06-27 6:05 ` Matan Azrad
2018-06-29 10:26 ` Guo, Jia
2018-06-29 10:30 ` [dpdk-dev] [PATCH V4 0/9] hot plug failure handle mechanism Jeff Guo
2018-06-29 10:30 ` [dpdk-dev] [PATCH V4 1/9] bus: introduce hotplug failure handler Jeff Guo
2018-07-03 22:21 ` Thomas Monjalon
2018-07-04 7:16 ` Guo, Jia
2018-07-04 7:55 ` Thomas Monjalon
2018-07-05 6:23 ` Guo, Jia
2018-07-05 8:30 ` Thomas Monjalon
2018-06-29 10:30 ` [dpdk-dev] [PATCH V4 2/9] bus/pci: implement hotplug handler operation Jeff Guo
2018-06-29 10:30 ` [dpdk-dev] [PATCH V4 3/9] bus: introduce sigbus handler Jeff Guo
2018-07-10 21:55 ` Stephen Hemminger
2018-07-11 2:15 ` Jeff Guo
2018-06-29 10:30 ` [dpdk-dev] [PATCH V4 4/9] bus/pci: implement sigbus handler operation Jeff Guo
2018-06-29 10:30 ` [dpdk-dev] [PATCH V4 5/9] bus: add helper to handle sigbus Jeff Guo
2018-06-29 10:51 ` Ananyev, Konstantin
2018-06-29 11:23 ` Guo, Jia
2018-06-29 12:21 ` Ananyev, Konstantin
2018-06-29 12:52 ` Gaëtan Rivet
2018-07-03 11:24 ` Guo, Jia
2018-06-29 10:30 ` [dpdk-dev] [PATCH V4 6/9] eal: add failure handle mechanism for hot plug Jeff Guo
2018-06-29 10:49 ` Ananyev, Konstantin
2018-06-29 11:15 ` Guo, Jia
2018-06-29 12:06 ` Ananyev, Konstantin
2018-06-29 10:30 ` [dpdk-dev] [PATCH V4 7/9] igb_uio: fix uio release issue when hot unplug Jeff Guo
2018-07-03 12:12 ` Ferruh Yigit
2018-06-29 10:30 ` [dpdk-dev] [PATCH V4 8/9] app/testpmd: show example to handle " Jeff Guo
2018-07-01 7:46 ` Matan Azrad
2018-07-03 9:35 ` Guo, Jia
2018-07-03 22:44 ` Thomas Monjalon
2018-07-04 3:48 ` Guo, Jia
2018-07-04 7:06 ` Matan Azrad
2018-07-05 7:54 ` Guo, Jia
2018-06-29 10:30 ` [dpdk-dev] [PATCH V4 9/9] app/testpmd: enable device hotplug monitoring Jeff Guo
2018-07-05 7:38 ` [dpdk-dev] [PATCH V5 0/7] hot plug failure handle mechanism Jeff Guo
2018-07-05 7:38 ` [dpdk-dev] [PATCH V5 1/7] bus: add hotplug failure handler Jeff Guo
2018-07-06 15:17 ` He, Shaopeng
2018-07-05 7:38 ` [dpdk-dev] [PATCH V5 2/7] bus/pci: implement hotplug failure handler ops Jeff Guo
2018-07-06 15:17 ` He, Shaopeng
2018-07-09 5:29 ` Jeff Guo
2018-07-05 7:38 ` [dpdk-dev] [PATCH V5 3/7] bus: add sigbus handler Jeff Guo
2018-07-06 15:17 ` He, Shaopeng
2018-07-05 7:38 ` [dpdk-dev] [PATCH V5 4/7] bus/pci: implement sigbus handler operation Jeff Guo
2018-07-06 15:18 ` He, Shaopeng
2018-07-05 7:38 ` [dpdk-dev] [PATCH V5 5/7] bus: add helper to handle sigbus Jeff Guo
2018-07-06 15:22 ` He, Shaopeng
2018-07-09 5:31 ` Jeff Guo
2018-07-08 13:30 ` Andrew Rybchenko
2018-07-09 5:33 ` Jeff Guo
2018-07-05 7:38 ` [dpdk-dev] [PATCH V5 6/7] eal: add failure handle mechanism for hotplug Jeff Guo
2018-07-06 15:22 ` He, Shaopeng
2018-07-08 13:46 ` Andrew Rybchenko
2018-07-09 5:40 ` Jeff Guo
2018-07-05 8:21 ` [dpdk-dev] [PATCH V5 0/7] hot plug failure handle mechanism Jeff Guo
2018-07-05 8:21 ` [dpdk-dev] [PATCH V5 7/7] igb_uio: fix uio release issue when hot unplug Jeff Guo
2018-07-09 6:51 ` [dpdk-dev] [PATCH v6 0/7] hotplug failure handle mechanism Jeff Guo
2018-07-09 6:51 ` [dpdk-dev] [PATCH v6 1/7] bus: add hotplug failure handler Jeff Guo
2018-07-09 6:51 ` [dpdk-dev] [PATCH v6 2/7] bus/pci: implement hotplug failure handler ops Jeff Guo
2018-07-09 6:51 ` [dpdk-dev] [PATCH v6 3/7] bus: add sigbus handler Jeff Guo
2018-07-09 6:51 ` [dpdk-dev] [PATCH v6 4/7] bus/pci: implement sigbus handler operation Jeff Guo
2018-07-09 6:51 ` [dpdk-dev] [PATCH v6 5/7] bus: add helper to handle sigbus Jeff Guo
2018-07-09 6:51 ` [dpdk-dev] [PATCH v6 6/7] eal: add failure handle mechanism for hotplug Jeff Guo
2018-07-09 7:42 ` Gaëtan Rivet
2018-07-09 8:12 ` Jeff Guo
2018-07-09 6:51 ` [dpdk-dev] [PATCH v6 7/7] igb_uio: fix uio release issue when hot unplug Jeff Guo
2018-07-09 11:56 ` [dpdk-dev] [PATCH v7 0/7] hotplug failure handle mechanism Jeff Guo
2018-07-09 11:56 ` [dpdk-dev] [PATCH v7 1/7] bus: add hotplug failure handler Jeff Guo
2018-07-09 11:56 ` [dpdk-dev] [PATCH v7 2/7] bus/pci: implement hotplug failure handler ops Jeff Guo
2018-07-09 11:56 ` [dpdk-dev] [PATCH v7 3/7] bus: add sigbus handler Jeff Guo
2018-07-09 11:56 ` [dpdk-dev] [PATCH v7 4/7] bus/pci: implement sigbus handler operation Jeff Guo
2018-07-09 11:56 ` [dpdk-dev] [PATCH v7 5/7] bus: add helper to handle sigbus Jeff Guo
2018-07-09 11:56 ` [dpdk-dev] [PATCH v7 6/7] eal: add failure handle mechanism for hotplug Jeff Guo
2018-07-09 11:56 ` [dpdk-dev] [PATCH v7 7/7] igb_uio: fix uio release issue when hot unplug Jeff Guo
2018-07-09 12:00 ` [dpdk-dev] [PATCH v7 0/7] hotplug failure handle mechanism Jeff Guo
2018-07-09 12:01 ` [dpdk-dev] [PATCH v7 1/7] bus: add hotplug failure handler Jeff Guo
2018-07-09 12:01 ` [dpdk-dev] [PATCH v7 2/7] bus/pci: implement hotplug failure handler ops Jeff Guo
2018-07-09 12:01 ` [dpdk-dev] [PATCH v7 3/7] bus: add sigbus handler Jeff Guo
2018-07-09 12:01 ` [dpdk-dev] [PATCH v7 4/7] bus/pci: implement sigbus handler operation Jeff Guo
2018-07-09 12:01 ` [dpdk-dev] [PATCH v7 5/7] bus: add helper to handle sigbus Jeff Guo
2018-07-09 13:48 ` Andrew Rybchenko
2018-07-10 8:22 ` Jeff Guo
2018-07-10 8:40 ` Gaëtan Rivet
2018-07-10 10:07 ` Jeff Guo
2018-07-09 12:01 ` [dpdk-dev] [PATCH v7 6/7] eal: add failure handle mechanism for hotplug Jeff Guo
2018-07-09 13:50 ` Andrew Rybchenko
2018-07-10 8:23 ` Jeff Guo
2018-07-09 12:01 ` [dpdk-dev] [PATCH v7 7/7] igb_uio: fix uio release issue when hot unplug Jeff Guo
2018-07-09 22:44 ` Stephen Hemminger
2018-07-10 8:28 ` Jeff Guo
2018-07-10 11:03 ` [dpdk-dev] [PATCH v8 0/7] hotplug failure handle mechanism Jeff Guo
2018-07-10 11:03 ` [dpdk-dev] [PATCH v8 1/7] bus: add hotplug failure handler Jeff Guo
2018-07-10 11:03 ` [dpdk-dev] [PATCH v8 2/7] bus/pci: implement hotplug failure handler ops Jeff Guo
2018-07-10 11:03 ` [dpdk-dev] [PATCH v8 3/7] bus: add sigbus handler Jeff Guo
2018-07-10 11:03 ` [dpdk-dev] [PATCH v8 4/7] bus/pci: implement sigbus handler operation Jeff Guo
2018-07-10 11:03 ` [dpdk-dev] [PATCH v8 5/7] bus: add helper to handle sigbus Jeff Guo
2018-07-10 11:03 ` [dpdk-dev] [PATCH v8 6/7] eal: add failure handle mechanism for hotplug Jeff Guo
2018-07-10 11:03 ` [dpdk-dev] [PATCH v8 7/7] igb_uio: fix uio release issue " Jeff Guo
2018-07-10 21:48 ` Stephen Hemminger
2018-07-11 3:10 ` Jeff Guo
2018-07-10 21:52 ` Stephen Hemminger
2018-07-11 2:46 ` Jeff Guo
2018-07-11 10:01 ` Jeff Guo
2018-07-11 10:41 ` [dpdk-dev] [PATCH v9 0/7] hotplug failure handle mechanism Jeff Guo
2018-07-11 10:41 ` [dpdk-dev] [PATCH v9 1/7] bus: add hotplug failure handler Jeff Guo
2018-07-11 10:41 ` [dpdk-dev] [PATCH v9 2/7] bus/pci: implement hotplug failure handler ops Jeff Guo
2018-07-11 10:41 ` [dpdk-dev] [PATCH v9 3/7] bus: add sigbus handler Jeff Guo
2018-07-11 10:41 ` [dpdk-dev] [PATCH v9 4/7] bus/pci: implement sigbus handler operation Jeff Guo
2018-07-11 10:41 ` [dpdk-dev] [PATCH v9 5/7] bus: add helper to handle sigbus Jeff Guo
2018-07-11 10:41 ` [dpdk-dev] [PATCH v9 6/7] eal: add failure handle mechanism for hotplug Jeff Guo
2018-07-11 10:41 ` [dpdk-dev] [PATCH v9 7/7] igb_uio: fix unexpected remove issue " Jeff Guo
2018-07-12 1:57 ` He, Shaopeng
2018-07-11 15:46 ` [dpdk-dev] [PATCH v9 0/7] hotplug failure handle mechanism Stephen Hemminger
2018-07-12 3:14 ` Jeff Guo
2018-08-17 10:48 ` [dpdk-dev] [PATCH v10 0/8] " Jeff Guo
2018-08-17 10:48 ` [dpdk-dev] [PATCH v10 1/8] bus: add memory failure handler Jeff Guo
2018-08-17 10:48 ` [dpdk-dev] [PATCH v10 2/8] bus/pci: implement memory failure handler ops Jeff Guo
2018-08-17 10:48 ` [dpdk-dev] [PATCH v10 3/8] bus: add sigbus handler Jeff Guo
2018-08-17 10:48 ` [dpdk-dev] [PATCH v10 4/8] bus/pci: implement sigbus handler ops Jeff Guo
2018-08-17 10:48 ` [dpdk-dev] [PATCH v10 5/8] bus: add helper to handle sigbus Jeff Guo
2018-08-17 10:48 ` Jeff Guo
2018-08-17 10:48 ` [dpdk-dev] [PATCH v10 6/8] eal: add failure handle mechanism for hotplug Jeff Guo
2018-08-17 10:48 ` [dpdk-dev] [PATCH v10 7/8] igb_uio: fix unexpected remove issue " Jeff Guo
2018-09-27 15:07 ` Ferruh Yigit
2018-10-18 5:51 ` Jeff Guo
2018-10-18 6:27 ` [dpdk-dev] [PATCH v1] igb_uio: fix unexpected removal for hot-unplug Jeff Guo
2018-10-18 16:06 ` Ferruh Yigit
2018-10-19 8:35 ` Jeff Guo
2018-10-22 11:13 ` Ferruh Yigit
2018-10-24 23:14 ` Thomas Monjalon
2018-08-17 10:48 ` [dpdk-dev] [PATCH v10 8/8] testpmd: use hotplug failure handle mechanism Jeff Guo
2018-09-30 10:24 ` [dpdk-dev] [PATCH v11 0/7] hot-unplug " Jeff Guo
2018-09-30 10:24 ` [dpdk-dev] [PATCH v11 1/7] bus: add hot-unplug handler Jeff Guo
2018-09-30 10:24 ` [dpdk-dev] [PATCH v11 2/7] bus/pci: implement hot-unplug handler ops Jeff Guo
2018-09-30 10:24 ` [dpdk-dev] [PATCH v11 3/7] bus: add sigbus handler Jeff Guo
2018-09-30 10:24 ` [dpdk-dev] [PATCH v11 4/7] bus/pci: implement sigbus handler ops Jeff Guo
2018-09-30 10:24 ` [dpdk-dev] [PATCH v11 5/7] bus: add helper to handle sigbus Jeff Guo
2018-09-30 10:24 ` [dpdk-dev] [PATCH v11 6/7] eal: add failure handle mechanism for hot-unplug Jeff Guo
2018-09-30 10:24 ` [dpdk-dev] [PATCH v11 7/7] testpmd: use hot-unplug failure handle mechanism Jeff Guo
2018-09-30 11:29 ` [dpdk-dev] [PATCH v11 0/7] " Jeff Guo
2018-09-30 11:29 ` [dpdk-dev] [PATCH v11 1/7] bus: add hot-unplug handler Jeff Guo
2018-09-30 11:29 ` [dpdk-dev] [PATCH v11 2/7] bus/pci: implement hot-unplug handler ops Jeff Guo
2018-09-30 11:29 ` [dpdk-dev] [PATCH v11 3/7] bus: add sigbus handler Jeff Guo
2018-09-30 11:30 ` [dpdk-dev] [PATCH v11 4/7] bus/pci: implement sigbus handler ops Jeff Guo
2018-09-30 11:30 ` [dpdk-dev] [PATCH v11 5/7] bus: add helper to handle sigbus Jeff Guo
2018-09-30 11:30 ` [dpdk-dev] [PATCH v11 6/7] eal: add failure handle mechanism for hot-unplug Jeff Guo
2018-09-30 19:46 ` Ananyev, Konstantin
2018-10-02 4:01 ` Jeff Guo
2018-09-30 11:30 ` [dpdk-dev] [PATCH v11 7/7] testpmd: use hot-unplug failure handle mechanism Jeff Guo
2018-10-01 9:00 ` [dpdk-dev] [PATCH v11 0/7] " Stephen Hemminger
2018-10-01 9:55 ` Jerin Jacob
2018-10-02 10:08 ` Jeff Guo
2018-10-02 9:57 ` Jeff Guo
2018-10-02 12:32 ` [dpdk-dev] [PATCH v12 " Jeff Guo
2018-10-02 12:32 ` [dpdk-dev] [PATCH v12 1/7] bus: add hot-unplug handler Jeff Guo
2018-10-02 12:32 ` [dpdk-dev] [PATCH v12 2/7] bus/pci: implement hot-unplug handler ops Jeff Guo
2018-10-02 12:32 ` [dpdk-dev] [PATCH v12 3/7] bus: add sigbus handler Jeff Guo
2018-10-02 12:32 ` [dpdk-dev] [PATCH v12 4/7] bus/pci: implement sigbus handler ops Jeff Guo
2018-10-02 12:32 ` [dpdk-dev] [PATCH v12 5/7] bus: add helper to handle sigbus Jeff Guo
2018-10-02 12:32 ` [dpdk-dev] [PATCH v11 6/7] eal: add failure handle mechanism for hot-unplug Jeff Guo
2018-10-02 12:32 ` [dpdk-dev] [PATCH v11 7/7] testpmd: use hot-unplug failure handle mechanism Jeff Guo
2018-10-02 12:35 ` [dpdk-dev] [PATCH v12 0/7] " Jeff Guo
2018-10-02 12:35 ` [dpdk-dev] [PATCH v12 1/7] bus: add hot-unplug handler Jeff Guo
2018-10-02 12:35 ` [dpdk-dev] [PATCH v12 2/7] bus/pci: implement hot-unplug handler ops Jeff Guo
2018-10-02 12:35 ` [dpdk-dev] [PATCH v12 3/7] bus: add sigbus handler Jeff Guo
2018-10-02 14:32 ` Burakov, Anatoly
2018-10-04 3:14 ` Jeff Guo
2018-10-02 12:35 ` [dpdk-dev] [PATCH v12 4/7] bus/pci: implement sigbus handler ops Jeff Guo
2018-10-02 14:39 ` Burakov, Anatoly
2018-10-04 3:58 ` Jeff Guo
2018-10-02 12:35 ` [dpdk-dev] [PATCH v12 5/7] bus: add helper to handle sigbus Jeff Guo
2018-10-02 12:35 ` [dpdk-dev] [PATCH v12 6/7] eal: add failure handle mechanism for hot-unplug Jeff Guo
2018-10-02 13:34 ` Ananyev, Konstantin
2018-10-04 2:31 ` Jeff Guo
2018-10-02 15:53 ` Burakov, Anatoly
2018-10-02 16:00 ` Ananyev, Konstantin
2018-10-04 3:12 ` Jeff Guo
2018-10-02 12:35 ` [dpdk-dev] [PATCH v12 7/7] testpmd: use hot-unplug failure handle mechanism Jeff Guo
2018-10-02 15:21 ` Iremonger, Bernard
2018-10-04 2:56 ` Jeff Guo
2018-10-04 6:30 ` [dpdk-dev] [PATCH v13 0/7] " Jeff Guo
2018-10-04 6:30 ` [dpdk-dev] [PATCH v13 1/7] bus: add hot-unplug handler Jeff Guo
2018-10-04 6:30 ` [dpdk-dev] [PATCH v13 2/7] bus/pci: implement hot-unplug handler ops Jeff Guo
2018-10-04 6:30 ` [dpdk-dev] [PATCH v13 3/7] bus: add sigbus handler Jeff Guo
2018-10-04 6:30 ` [dpdk-dev] [PATCH v13 4/7] bus/pci: implement sigbus handler ops Jeff Guo
2018-10-04 6:30 ` [dpdk-dev] [PATCH v13 5/7] bus: add helper to handle sigbus Jeff Guo
2018-10-04 6:30 ` [dpdk-dev] [PATCH v13 6/7] eal: add failure handle mechanism for hot-unplug Jeff Guo
2018-10-04 6:30 ` [dpdk-dev] [PATCH v13 7/7] app/testpmd: use hotplug failure handler Jeff Guo
2018-10-04 10:31 ` Iremonger, Bernard
2018-10-04 13:53 ` Jeff Guo
2018-10-04 12:02 ` [dpdk-dev] [PATCH v13 0/7] hot-unplug failure handle mechanism Ananyev, Konstantin
2018-10-04 14:46 ` [dpdk-dev] [PATCH v14 " Jeff Guo
2018-10-04 14:46 ` [dpdk-dev] [PATCH v14 1/7] bus: add hot-unplug handler Jeff Guo
2018-10-04 14:46 ` [dpdk-dev] [PATCH v14 2/7] bus/pci: implement hot-unplug handler ops Jeff Guo
2018-10-04 14:46 ` [dpdk-dev] [PATCH v14 3/7] bus: add sigbus handler Jeff Guo
2018-10-04 14:46 ` [dpdk-dev] [PATCH v14 4/7] bus/pci: implement sigbus handler ops Jeff Guo
2018-10-04 14:46 ` [dpdk-dev] [PATCH v14 5/7] bus: add helper to handle sigbus Jeff Guo
2018-10-04 14:46 ` [dpdk-dev] [PATCH v14 6/7] eal: add failure handle mechanism for hot-unplug Jeff Guo
2018-10-15 10:43 ` Thomas Monjalon
2018-10-04 14:46 ` [dpdk-dev] [PATCH v14 7/7] app/testpmd: use hotplug failure handler Jeff Guo
2018-10-05 12:26 ` Iremonger, Bernard
2018-10-15 11:27 ` [dpdk-dev] [PATCH v15 0/7] hot-unplug failure handle mechanism Jeff Guo
2018-10-15 11:27 ` [dpdk-dev] [PATCH v15 1/7] bus: add hot-unplug handler Jeff Guo
2018-10-15 11:27 ` [dpdk-dev] [PATCH v15 2/7] bus/pci: implement hot-unplug handler ops Jeff Guo
2018-10-15 11:27 ` [dpdk-dev] [PATCH v15 3/7] bus: add sigbus handler Jeff Guo
2018-10-15 11:27 ` [dpdk-dev] [PATCH v15 4/7] bus/pci: implement sigbus handler ops Jeff Guo
2018-10-15 13:41 ` Thomas Monjalon
2018-10-15 14:16 ` Thomas Monjalon
2018-10-15 11:27 ` [dpdk-dev] [PATCH v15 5/7] bus: add helper to handle sigbus Jeff Guo
2018-10-15 11:27 ` [dpdk-dev] [PATCH v15 6/7] eal: add failure handle mechanism for hot-unplug Jeff Guo
2018-10-15 11:27 ` [dpdk-dev] [PATCH v15 7/7] app/testpmd: use hotplug failure handler Jeff Guo
2018-10-15 20:19 ` [dpdk-dev] [PATCH v15 0/7] hot-unplug failure handle mechanism Thomas Monjalon
2017-06-29 5:01 ` [dpdk-dev] [PATCH v3 0/2] add uevent api for hot plug Jeff Guo
2017-06-29 5:01 ` [dpdk-dev] [PATCH v3 1/2] eal: " Jeff Guo
2017-07-04 7:15 ` Wu, Jingjing
2017-09-03 15:49 ` [dpdk-dev] [PATCH v4 0/2] add uevent monitor " Jeff Guo
2017-09-03 15:49 ` [dpdk-dev] [PATCH v4 1/2] eal: " Jeff Guo
2017-09-03 16:10 ` Stephen Hemminger
2017-09-03 16:12 ` Stephen Hemminger
2017-09-05 5:28 ` Guo, Jia
2017-09-03 16:14 ` Stephen Hemminger
2017-09-03 16:16 ` Stephen Hemminger
2017-09-03 15:49 ` [dpdk-dev] [PATCH v4 2/2] app/testpmd: use uevent to monitor hot removal Jeff Guo
2017-09-20 4:12 ` [dpdk-dev] [PATCH v5 0/2] add uevent monitor for hot plug Jeff Guo
2017-09-19 18:44 ` Jan Blunck
2017-09-20 6:51 ` Guo, Jia
2017-09-20 4:12 ` [dpdk-dev] [PATCH v5 1/2] eal: " Jeff Guo
2017-09-20 4:12 ` [dpdk-dev] [PATCH v5 2/2] app/testpmd: use uevent to monitor hot removal Jeff Guo
2017-11-01 20:16 ` [dpdk-dev] [PATCH v6 0/2] add uevent monitor for hot plug Jeff Guo
2017-11-01 20:16 ` [dpdk-dev] [PATCH v6 1/2] eal: " Jeff Guo
2017-11-01 21:36 ` Stephen Hemminger
2017-11-01 21:41 ` Stephen Hemminger
2017-11-08 5:39 ` Guo, Jia
2017-12-25 8:30 ` Guo, Jia
2017-12-25 18:06 ` Stephen Hemminger
2018-01-02 9:40 ` Guo, Jia
2017-11-01 20:16 ` [dpdk-dev] [PATCH v6 2/2] app/testpmd: use uevent to monitor hotplug Jeff Guo
2018-01-03 1:42 ` [dpdk-dev] [PATCH v7 0/2] add uevent monitor for hot plug Jeff Guo
2018-01-03 1:42 ` [dpdk-dev] [PATCH v7 1/2] eal: " Jeff Guo
2018-01-02 17:02 ` Matan Azrad
2018-01-08 5:26 ` Guo, Jia
2018-01-08 8:14 ` Matan Azrad
2018-01-08 6:05 ` Guo, Jia
2018-01-09 0:39 ` Thomas Monjalon
2018-01-09 8:25 ` Guo, Jia
2018-01-09 10:31 ` Mordechay Haimovsky
2018-01-09 10:47 ` Thomas Monjalon
2018-01-09 11:39 ` Guo, Jia
2018-01-09 11:44 ` Thomas Monjalon
2018-01-09 12:08 ` Guo, Jia
2018-01-09 12:42 ` Gaëtan Rivet
2018-01-10 9:29 ` Guo, Jia
2018-01-09 13:44 ` Thomas Monjalon
2018-01-10 9:32 ` Guo, Jia
2018-01-09 11:45 ` Guo, Jia
2018-01-09 11:38 ` Thomas Monjalon
2018-01-09 11:58 ` Guo, Jia
2018-01-09 13:40 ` Thomas Monjalon
2018-01-03 1:42 ` [dpdk-dev] [PATCH v7 2/2] app/testpmd: use uevent to monitor hotplug Jeff Guo
2018-01-10 3:30 ` [dpdk-dev] [PATCH V8 0/3] add uevent mechanism in eal framework Jeff Guo
2018-01-10 3:30 ` [dpdk-dev] [PATCH V8 1/3] eal: add uevent monitor for hot plug Jeff Guo
2018-01-10 3:30 ` [dpdk-dev] [PATCH V8 2/3] igb_uio: fix device removal issuse for hotplug Jeff Guo
2018-01-10 3:30 ` [dpdk-dev] [PATCH V8 3/3] app/testpmd: use uevent to monitor hotplug Jeff Guo
2018-01-10 9:12 ` [dpdk-dev] [PATCH V9 0/5] add uevent mechanism in eal framework Jeff Guo
2018-01-10 9:12 ` [dpdk-dev] [PATCH V9 1/5] eal: add uevent monitor api and callback func Jeff Guo
2018-01-10 16:34 ` Stephen Hemminger
2018-01-11 1:43 ` Thomas Monjalon
2018-01-11 14:24 ` Guo, Jia
2018-01-10 9:12 ` [dpdk-dev] [PATCH V9 2/5] eal: add uevent pass and process function Jeff Guo
2018-01-11 14:05 ` [dpdk-dev] [PATCH V10 1/2] eal: add uevent monitor api and callback func Jeff Guo
2018-01-11 14:05 ` [dpdk-dev] [PATCH V10 2/2] eal: add uevent pass and process function Jeff Guo
2018-01-14 23:24 ` Thomas Monjalon
2018-01-15 10:52 ` Guo, Jia
2018-01-15 11:29 ` Thomas Monjalon
2018-01-15 15:33 ` Guo, Jia
2018-01-15 10:48 ` [dpdk-dev] [PATCH V11 1/3] eal: add uevent monitor api and callback func Jeff Guo
2018-01-15 10:48 ` [dpdk-dev] [PATCH V11 2/3] eal: add uevent pass and process function Jeff Guo
2018-01-17 22:00 ` Thomas Monjalon
2018-01-18 4:17 ` Guo, Jia
2018-01-15 10:48 ` [dpdk-dev] [PATCH V11 3/3] app/testpmd: use uevent to monitor hotplug Jeff Guo
2018-01-18 4:12 ` [dpdk-dev] [PATCH V12 1/3] eal: add uevent monitor api and callback func Jeff Guo
2018-01-18 4:12 ` [dpdk-dev] [PATCH V12 2/3] eal: add uevent pass and process function Jeff Guo
2018-01-24 15:00 ` Wu, Jingjing
2018-01-18 4:12 ` [dpdk-dev] [PATCH V12 3/3] app/testpmd: use uevent to monitor hotplug Jeff Guo
2018-01-24 15:21 ` Wu, Jingjing
2018-01-25 14:58 ` Guo, Jia
2018-01-25 14:46 ` [dpdk-dev] [PATCH V13 1/3] eal: add uevent monitor api and callback func Jeff Guo
2018-01-25 14:46 ` [dpdk-dev] [PATCH V13 2/3] eal: add uevent pass and process function Jeff Guo
2018-01-25 14:46 ` [dpdk-dev] [PATCH V13 3/3] app/testpmd: use uevent to monitor hotplug Jeff Guo
2018-01-26 3:49 ` [dpdk-dev] [PATCH V13 1/3] eal: add uevent monitor api and callback func Jeff Guo
2018-01-26 3:49 ` [dpdk-dev] [PATCH V13 2/3] eal: add uevent pass and process function Jeff Guo
2018-01-26 3:49 ` [dpdk-dev] [PATCH V13 3/3] app/testpmd: use uevent to monitor hotplug Jeff Guo
2018-01-30 12:20 ` [dpdk-dev] [PATCH V14 1/3] eal: add uevent monitor api and callback func Jeff Guo
2018-01-30 12:20 ` [dpdk-dev] [PATCH V14 2/3] eal: add uevent pass and process function Jeff Guo
2018-01-30 12:21 ` [dpdk-dev] [PATCH V14 3/3] app/testpmd: use uevent to monitor hotplug Jeff Guo
2018-01-31 5:21 ` Wu, Jingjing
2018-03-21 5:27 ` [dpdk-dev] [PATCH V15 1/5] eal: add uevent monitor api and callback func Jeff Guo
2018-03-21 5:27 ` [dpdk-dev] [PATCH V15 2/5] eal: add uevent pass and process function Jeff Guo
2018-03-21 14:20 ` Tan, Jianfeng
2018-03-22 8:20 ` Guo, Jia
2018-03-21 5:27 ` [dpdk-dev] [PATCH V15 3/5] app/testpmd: use uevent to monitor hotplug Jeff Guo
2018-03-26 10:55 ` [dpdk-dev] [PATCH V16 0/3] add device event monitor framework Jeff Guo
2018-03-26 10:55 ` [dpdk-dev] [PATCH V16 1/3] eal: add device event handle in interrupt thread Jeff Guo
2018-03-26 10:55 ` [dpdk-dev] [PATCH V16 2/3] eal: add device event monitor framework Jeff Guo
2018-03-26 10:55 ` [dpdk-dev] [PATCH V16 3/3] app/testpmd: enable device hotplug monitoring Jeff Guo
2018-03-26 11:20 ` [dpdk-dev] [PATCH V16 0/4] add device event monitor framework Jeff Guo
2018-03-26 11:20 ` [dpdk-dev] [PATCH V16 1/4] eal: add device event handle in interrupt thread Jeff Guo
2018-03-27 9:26 ` Tan, Jianfeng
2018-03-28 8:14 ` Guo, Jia
2018-03-26 11:20 ` [dpdk-dev] [PATCH V16 2/4] eal: add device event monitor framework Jeff Guo
2018-03-28 3:39 ` Tan, Jianfeng
2018-03-28 8:12 ` Guo, Jia
2018-03-26 11:20 ` [dpdk-dev] [PATCH V16 3/4] eal/linux: uevent parse and process Jeff Guo
2018-03-28 16:15 ` Tan, Jianfeng
2018-03-29 13:32 ` Van Haaren, Harry
2018-03-29 15:03 ` Guo, Jia
2018-03-29 15:08 ` Guo, Jia
2018-03-26 11:20 ` [dpdk-dev] [PATCH V16 4/4] app/testpmd: enable device hotplug monitoring Jeff Guo
2018-03-28 16:41 ` Tan, Jianfeng
2018-03-29 16:00 ` [dpdk-dev] [PATCH V17 0/4] add device event monitor framework Jeff Guo
2018-03-29 16:00 ` [dpdk-dev] [PATCH V17 1/4] eal: add device event handle in interrupt thread Jeff Guo
2018-03-29 16:00 ` [dpdk-dev] [PATCH V17 2/4] eal: add device event monitor framework Jeff Guo
2018-03-29 16:00 ` [dpdk-dev] [PATCH V17 3/4] eal/linux: uevent parse and process Jeff Guo
2018-03-29 16:59 ` Stephen Hemminger
2018-04-02 4:20 ` Guo, Jia
2018-03-29 17:00 ` Stephen Hemminger
2018-04-02 4:19 ` Guo, Jia
2018-03-29 16:00 ` [dpdk-dev] [PATCH V17 4/4] app/testpmd: enable device hotplug monitoring Jeff Guo
2018-03-29 17:00 ` Stephen Hemminger
2018-04-02 4:18 ` Guo, Jia
2018-04-02 5:49 ` Wu, Jingjing
2018-04-02 11:31 ` Guo, Jia
2018-04-03 10:33 ` [dpdk-dev] [PATCH V18 0/4] add device event monitor framework Jeff Guo
2018-04-03 10:33 ` [dpdk-dev] [PATCH V18 1/4] eal: add device event handle in interrupt thread Jeff Guo
2018-04-04 1:47 ` Tan, Jianfeng
2018-04-04 4:00 ` Guo, Jia
2018-04-03 10:33 ` [dpdk-dev] [PATCH V18 2/4] eal: add device event monitor framework Jeff Guo
2018-04-04 2:53 ` Tan, Jianfeng
2018-04-05 3:44 ` Guo, Jia
2018-04-03 10:33 ` [dpdk-dev] [PATCH V18 3/4] eal/linux: uevent parse and process Jeff Guo
2018-04-04 3:15 ` Tan, Jianfeng
2018-04-05 6:09 ` Guo, Jia
2018-04-03 10:33 ` [dpdk-dev] [PATCH V18 4/4] app/testpmd: enable device hotplug monitoring Jeff Guo
2018-04-04 3:22 ` Tan, Jianfeng
2018-04-04 16:31 ` Matan Azrad
2018-04-05 8:40 ` Guo, Jia
2018-04-05 9:03 ` Tan, Jianfeng
2018-04-05 8:32 ` [dpdk-dev] [PATCH V19 0/4] add device event monitor framework Jeff Guo
2018-04-05 8:32 ` [dpdk-dev] [PATCH V19 1/4] eal: add device event handle in interrupt thread Jeff Guo
2018-04-05 8:32 ` [dpdk-dev] [PATCH V19 2/4] eal: add device event monitor framework Jeff Guo
2018-04-05 10:15 ` Tan, Jianfeng
2018-04-05 8:32 ` [dpdk-dev] [PATCH V19 3/4] eal/linux: uevent parse and process Jeff Guo
2018-04-05 8:32 ` [dpdk-dev] [PATCH V19 4/4] app/testpmd: enable device hotplug monitoring Jeff Guo
2018-04-05 9:02 ` [dpdk-dev] [PATCH V19 0/4] add device event monitor framework Jeff Guo
2018-04-05 9:02 ` [dpdk-dev] [PATCH V19 1/4] eal: add device event handle in interrupt thread Jeff Guo
2018-04-05 9:02 ` [dpdk-dev] [PATCH V19 2/4] eal: add device event monitor framework Jeff Guo
2018-04-05 9:02 ` [dpdk-dev] [PATCH V19 3/4] eal/linux: uevent parse and process Jeff Guo
2018-04-05 11:05 ` Tan, Jianfeng
2018-04-11 11:40 ` Guo, Jia
2018-04-05 9:02 ` [dpdk-dev] [PATCH V19 4/4] app/testpmd: enable device hotplug monitoring Jeff Guo
2018-04-05 16:10 ` [dpdk-dev] [PATCH V20 0/4] add device event monitor framework Jeff Guo
2018-04-05 16:10 ` [dpdk-dev] [PATCH V20 1/4] eal: add device event handle in interrupt thread Jeff Guo
2018-04-05 16:10 ` [dpdk-dev] [PATCH V20 2/4] eal: add device event monitor framework Jeff Guo
2018-04-05 21:54 ` Thomas Monjalon
2018-04-06 3:51 ` Guo, Jia
2018-04-05 16:10 ` [dpdk-dev] [PATCH V20 3/4] eal/linux: uevent parse and process Jeff Guo
2018-04-05 16:22 ` Tan, Jianfeng
2018-04-06 3:47 ` Guo, Jia
2018-04-05 21:58 ` Thomas Monjalon
2018-04-06 3:52 ` Guo, Jia
2018-04-05 16:10 ` [dpdk-dev] [PATCH V20 4/4] app/testpmd: enable device hotplug monitoring Jeff Guo
2018-04-05 21:48 ` Thomas Monjalon
2018-04-06 3:51 ` Guo, Jia
2018-04-06 3:54 ` [dpdk-dev] [PATCH V21 0/4] add device event monitor framework Jeff Guo
2018-04-06 3:54 ` [dpdk-dev] [PATCH V21 1/4] eal: add device event handle in interrupt thread Jeff Guo
2018-04-06 3:55 ` [dpdk-dev] [PATCH V21 2/4] eal: add device event monitor framework Jeff Guo
2018-04-12 8:36 ` Thomas Monjalon
2018-04-06 3:55 ` [dpdk-dev] [PATCH V21 3/4] eal/linux: uevent parse and process Jeff Guo
2018-04-06 3:55 ` [dpdk-dev] [PATCH V21 4/4] app/testpmd: enable device hotplug monitoring Jeff Guo
2018-01-31 0:44 ` [dpdk-dev] [PATCH V14 1/3] eal: add uevent monitor api and callback func Stephen Hemminger
2018-02-02 10:45 ` Guo, Jia
2018-01-26 16:53 ` [dpdk-dev] [PATCH V13 " Bruce Richardson
2018-01-27 3:48 ` Guo, Jia
2018-01-30 0:14 ` Thomas Monjalon
2018-01-30 12:20 ` Guo, Jia
2018-01-19 1:13 ` [dpdk-dev] [PATCH V12 " Thomas Monjalon
2018-01-19 2:51 ` Guo, Jia
2018-01-24 14:52 ` Wu, Jingjing
2018-01-25 14:57 ` Guo, Jia
2018-01-17 21:59 ` [dpdk-dev] [PATCH V11 " Thomas Monjalon
2018-01-18 4:23 ` Guo, Jia
2018-01-19 1:10 ` Thomas Monjalon
2018-01-14 23:16 ` [dpdk-dev] [PATCH V10 1/2] " Thomas Monjalon
2018-01-15 10:55 ` Guo, Jia
2018-01-15 11:32 ` Thomas Monjalon
2018-01-15 15:29 ` Guo, Jia
2018-01-10 9:12 ` [dpdk-dev] [PATCH V9 3/5] app/testpmd: use uevent to monitor hotplug Jeff Guo
2018-01-10 9:12 ` [dpdk-dev] [PATCH V9 4/5] pci_uio: add uevent hotplug failure handler in pci Jeff Guo
2018-01-10 9:12 ` [dpdk-dev] [PATCH V9 5/5] pci: add driver auto bind for hot insertion Jeff Guo
2018-03-21 6:11 ` [dpdk-dev] [PATCH V15 1/2] pci_uio: add uevent hotplug failure handler in uio Jeff Guo
2018-03-21 6:11 ` [dpdk-dev] [PATCH V15 2/2] pci: add driver auto bind for hot insertion Jeff Guo
2018-03-30 3:35 ` [dpdk-dev] [PATCH V15 1/2] pci_uio: add uevent hotplug failure handler in uio Tan, Jianfeng
2017-12-14 9:48 ` [dpdk-dev] [PATCH v6 0/2] add uevent monitor for hot plug Mordechay Haimovsky
2017-12-14 10:21 ` Gaëtan Rivet
2017-12-22 0:16 ` Guo, Jia
2017-12-24 15:12 ` Mordechay Haimovsky
2018-01-02 9:43 ` Guo, Jia
2017-06-29 5:01 ` [dpdk-dev] [PATCH v3 2/2] net/i40e: add hot plug monitor in i40e Jeff Guo
2017-07-04 7:15 ` Wu, Jingjing
2017-07-07 7:56 ` Thomas Monjalon
2017-07-07 10:17 ` Thomas Monjalon
2017-07-07 14:08 ` Guo, Jia
2017-07-09 22:35 ` Thomas Monjalon
2017-07-12 7:36 ` Guo, Jia
2017-06-29 2:25 ` [dpdk-dev] [PATCH v2 1/2] eal: add uevent api for hot plug Wu, Jingjing
2017-06-29 4:29 ` Guo, Jia
2017-07-04 23:45 ` Thomas Monjalon
2017-07-05 3:02 ` Guo, Jia
2017-07-05 7:32 ` Thomas Monjalon
2017-07-05 9:04 ` Guo, Jia
2017-08-22 14:56 ` Guo, Jia
2017-08-28 15:50 ` Gaëtan Rivet
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3cc2fd5f-48b9-7d0b-e942-1716b0622462@intel.com \
--to=jia.guo@intel.com \
--cc=bruce.richardson@intel.com \
--cc=dev@dpdk.org \
--cc=ferruh.yigit@intel.com \
--cc=gaetan.rivet@6wind.com \
--cc=harry.van.haaren@intel.com \
--cc=helin.zhang@intel.com \
--cc=jblunck@infradead.org \
--cc=jingjing.wu@intel.com \
--cc=konstantin.ananyev@intel.com \
--cc=matan@mellanox.com \
--cc=motih@mellanox.com \
--cc=qi.z.zhang@intel.com \
--cc=shaopeng.he@intel.com \
--cc=shreyansh.jain@nxp.com \
--cc=stephen@networkplumber.org \
--cc=thomas@monjalon.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).