DPDK patches and discussions
 help / color / mirror / Atom feed
From: "Dai, Wei" <wei.dai@intel.com>
To: "Ananyev, Konstantin" <konstantin.ananyev@intel.com>,
	"thomas@monjalon.net" <thomas@monjalon.net>
Cc: "dev@dpdk.org" <dev@dpdk.org>
Subject: Re: [dpdk-dev] [PATCH] ethdev: add enum type for loop on Rx/Tx offloads
Date: Wed, 21 Mar 2018 14:08:34 +0000	[thread overview]
Message-ID: <49759EB36A64CF4892C1AFEC9231E8D66CF6172C@PGSMSX112.gar.corp.intel.com> (raw)
In-Reply-To: <2601191342CEEE43887BDE71AB977258A0AB2111@irsmsx105.ger.corp.intel.com>

Hi, Konstantin
Thanks for your feedback.

> -----Original Message-----
> From: Ananyev, Konstantin
> Sent: Tuesday, March 20, 2018 8:00 PM
> To: Dai, Wei <wei.dai@intel.com>; thomas@monjalon.net
> Cc: dev@dpdk.org; Dai, Wei <wei.dai@intel.com>
> Subject: RE: [dpdk-dev] [PATCH] ethdev: add enum type for loop on Rx/Tx
> offloads
> 
> 
> Hi Wei,
> 
> >
> > This patch adds enum rte_eth_rx_offload_type and enum
> > rte_eth_tx_offload_type. For a loop on all Rx offloads, it is
> > convenient to begin with the first enum member
> > ETH_RX_OFFLOAD_FIRST_FEATURE and to end at
> ETH_RX_OFFLOAD_TOTAL_NUM.
> > A loop on all Tx offloads can begin with
> ETH_TX_OFFLOAD_FIRST_FEATURE
> > and end at ETH_TX_OFFLOAD_TOTAL_NUM.
> >
> > Signed-off-by: Wei Dai <wei.dai@intel.com>
> > ---
> >  lib/librte_ether/rte_ethdev.h | 44
> > +++++++++++++++++++++++++++++++++++++++++++
> >  1 file changed, 44 insertions(+)
> >
> > diff --git a/lib/librte_ether/rte_ethdev.h
> > b/lib/librte_ether/rte_ethdev.h index 0361533..0089ea3 100644
> > --- a/lib/librte_ether/rte_ethdev.h
> > +++ b/lib/librte_ether/rte_ethdev.h
> > @@ -946,6 +946,27 @@ struct rte_eth_conf {
> >  			     DEV_RX_OFFLOAD_VLAN_FILTER | \
> >  			     DEV_RX_OFFLOAD_VLAN_EXTEND)
> >
> > +enum rte_eth_rx_offload_type {
> > +	ETH_RX_OFFLOAD_FIRST_FEATURE = 0,
> > +	ETH_RX_OFFLOAD_VLAN_STRIP = ETH_RX_OFFLOAD_FIRST_FEATURE,
> > +	ETH_RX_OFFLOAD_IPV4_CKSUM,
> > +	ETH_RX_OFFLOAD_UDP_CKSUM,
> > +	ETH_RX_OFFLOAD_TCP_CKSUM,
> > +	ETH_RX_OFFLOAD_TCP_LRO,
> > +	ETH_RX_OFFLOAD_QINQ_STRIP,
> > +	ETH_RX_OFFLOAD_OUTER_IPV4_CKSUM,
> > +	ETH_RX_OFFLOAD_MACSEC_STRIP,
> > +	ETH_RX_OFFLOAD_HEADER_SPLIT,
> > +	ETH_RX_OFFLOAD_VLAN_FILTER,
> > +	ETH_RX_OFFLOAD_VLAN_EXTEND,
> > +	ETH_RX_OFFLOAD_JUMBO_FRAME,
> > +	ETH_RX_OFFLOAD_CRC_STRIP,
> > +	ETH_RX_OFFLOAD_SCATTER,
> > +	ETH_RX_OFFLOAD_TIMESTAMP,
> > +	ETH_RX_OFFLOAD_SECURITY,
> > +	ETH_RX_OFFLOAD_TOTAL_NUM
> > +};
> > +
> >  /*
> >   * If new Rx offload capabilities are defined, they also must be
> >   * mentioned in rte_rx_offload_names in rte_ethdev.c file.
> > @@ -981,6 +1002,29 @@ struct rte_eth_conf {
> >   */
> >  #define DEV_TX_OFFLOAD_SECURITY         0x00020000
> >
> > +enum rte_eth_tx_offload_type {
> > +	ETH_TX_OFFLOAD_FIRST_FEATURE = 0,
> > +	ETH_TX_OFFLOAD_VLAN_INSERT = ETH_TX_OFFLOAD_FIRST_FEATURE,
> > +	ETH_TX_OFFLOAD_IPV4_CKSUM,
> > +	ETH_TX_OFFLOAD_UDP_CKSUM,
> > +	ETH_TX_OFFLOAD_TCP_CKSUM,
> > +	ETH_TX_OFFLOAD_SCTP_CKSUM,
> > +	ETH_TX_OFFLOAD_TCP_TSO,
> > +	ETH_TX_OFFLOAD_UDP_TSO,
> > +	ETH_TX_OFFLOAD_OUTER_IPV4_CKSUM,
> > +	ETH_TX_OFFLOAD_QINQ_INSERT,
> > +	ETH_TX_OFFLOAD_VXLAN_TNL_TSO,
> > +	ETH_TX_OFFLOAD_GRE_TNL_TSO,
> > +	ETH_TX_OFFLOAD_IPIP_TNL_TSO,
> > +	ETH_TX_OFFLOAD_GENEVE_TNL_TSO,
> > +	ETH_TX_OFFLOAD_MACSEC_INSERT,
> > +	ETH_TX_OFFLOAD_MT_LOCKFREE,
> > +	ETH_TX_OFFLOAD_MULTI_SEGS,
> > +	ETH_TX_OFFLOAD_MBUF_FAST_FREE,
> > +	ETH_TX_OFFLOAD_SECURITY,
> > +	ETH_TX_OFFLOAD_TOTAL_NUM
> > +};
> 
> What is the purpose to introduce  these enums?
> It looks like they are not used anywhere?
> Konstantin

When I make the patch for new offloading test with testpmd,
I find I need loop on all possible offloads, without this enum type,
I have to loop from bit 0 to bit 63, I think it is better to stop at the last one and
No need to bit 63.
I guess it will be helpful for some future application which need loop on all offloadings.

> 
> > +
> >  /*
> >   * If new Tx offload capabilities are defined, they also must be
> >   * mentioned in rte_tx_offload_names in rte_ethdev.c file.
> > --
> > 2.7.5

  reply	other threads:[~2018-03-21 14:08 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-03-20  4:00 Wei Dai
2018-03-20 11:59 ` Ferruh Yigit
2018-03-20 12:00 ` Ananyev, Konstantin
2018-03-21 14:08   ` Dai, Wei [this message]
2018-03-21 14:23     ` Zhang, Qi Z
2018-03-22  0:41       ` Dai, Wei

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=49759EB36A64CF4892C1AFEC9231E8D66CF6172C@PGSMSX112.gar.corp.intel.com \
    --to=wei.dai@intel.com \
    --cc=dev@dpdk.org \
    --cc=konstantin.ananyev@intel.com \
    --cc=thomas@monjalon.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).