DPDK patches and discussions
 help / color / mirror / Atom feed
From: Vlad Zolotarov <vladz@cloudius-systems.com>
To: "Ouyang, Changchun" <changchun.ouyang@intel.com>,
	 "dev@dpdk.org" <dev@dpdk.org>
Subject: Re: [dpdk-dev] [PATCH v5 4/6] ether: Check VMDq RSS mode
Date: Tue, 13 Jan 2015 11:00:08 +0200	[thread overview]
Message-ID: <54B4DE98.5030607@cloudius-systems.com> (raw)
In-Reply-To: <F52918179C57134FAEC9EA62FA2F96251195B810@shsmsx102.ccr.corp.intel.com>


On 01/13/15 03:50, Ouyang, Changchun wrote:
>
> *From:*Vlad Zolotarov [mailto:vladz@cloudius-systems.com]
> *Sent:* Monday, January 12, 2015 9:59 PM
> *To:* Ouyang, Changchun; dev@dpdk.org
> *Subject:* Re: [dpdk-dev] [PATCH v5 4/6] ether: Check VMDq RSS mode
>
> On 01/12/15 05:41, Ouyang, Changchun wrote:
>
>     *From:*Vlad Zolotarov [mailto:vladz@cloudius-systems.com]
>     *Sent:* Friday, January 09, 2015 9:50 PM
>     *To:* Ouyang, Changchun; dev@dpdk.org <mailto:dev@dpdk.org>
>     *Subject:* Re: [dpdk-dev] [PATCH v5 4/6] ether: Check VMDq RSS mode
>
>     On 01/09/15 07:54, Ouyang, Changchun wrote:
>
>           
>
>           
>
>             -----Original Message-----
>
>             From: Vlad Zolotarov [mailto:vladz@cloudius-systems.com]
>
>             Sent: Friday, January 9, 2015 2:49 AM
>
>             To: Ouyang, Changchun;dev@dpdk.org  <mailto:dev@dpdk.org>
>
>             Subject: Re: [dpdk-dev] [PATCH v5 4/6] ether: Check VMDq RSS mode
>
>               
>
>               
>
>             On 01/08/15 11:19, Vlad Zolotarov wrote:
>
>                   
>
>                 On 01/07/15 08:32, Ouyang Changchun wrote:
>
>                     Check mq mode for VMDq RSS, handle it correctly instead of returning
>
>                     an error; Also remove the limitation of per pool queue number has max
>
>                     value of 1, because the per pool queue number could be 2 or 4 if it
>
>                     is VMDq RSS mode;
>
>                       
>
>                     The number of rxq specified in config will determine the mq mode for
>
>                     VMDq RSS.
>
>                       
>
>                     Signed-off-by: Changchun Ouyang<changchun.ouyang@intel.com>  <mailto:changchun.ouyang@intel.com>
>
>                       
>
>                     changes in v5:
>
>                         - Fix '<' issue, it should be '<=' to test rxq number;
>
>                         - Extract a function to remove the embeded switch-case statement.
>
>                       
>
>                     ---
>
>                        lib/librte_ether/rte_ethdev.c | 50
>
>                     ++++++++++++++++++++++++++++++++++++++-----
>
>                        1 file changed, 45 insertions(+), 5 deletions(-)
>
>                       
>
>                     diff --git a/lib/librte_ether/rte_ethdev.c
>
>                     b/lib/librte_ether/rte_ethdev.c index 95f2ceb..8363e26 100644
>
>                     --- a/lib/librte_ether/rte_ethdev.c
>
>                     +++ b/lib/librte_ether/rte_ethdev.c
>
>                     @@ -503,6 +503,31 @@ rte_eth_dev_tx_queue_config(struct
>
>             rte_eth_dev
>
>                     *dev, uint16_t nb_queues)
>
>                        }
>
>                          static int
>
>                     +rte_eth_dev_check_vf_rss_rxq_num(uint8_t port_id, uint16_t nb_rx_q)
>
>                     +{
>
>                     +    struct rte_eth_dev *dev = &rte_eth_devices[port_id];
>
>                     +    switch (nb_rx_q) {
>
>                     +    case 1:
>
>                     +    case 2:
>
>                     +        RTE_ETH_DEV_SRIOV(dev).active =
>
>                     +            ETH_64_POOLS;
>
>                     +        break;
>
>                     +    case 4:
>
>                     +        RTE_ETH_DEV_SRIOV(dev).active =
>
>                     +            ETH_32_POOLS;
>
>                     +        break;
>
>                     +    default:
>
>                     +        return -EINVAL;
>
>                     +    }
>
>                     +
>
>                     +    RTE_ETH_DEV_SRIOV(dev).nb_q_per_pool = nb_rx_q;
>
>                     +    RTE_ETH_DEV_SRIOV(dev).def_pool_q_idx =
>
>                     +        dev->pci_dev->max_vfs * nb_rx_q;
>
>                     +
>
>                     +    return 0;
>
>                     +}
>
>                     +
>
>                     +static int
>
>                        rte_eth_dev_check_mq_mode(uint8_t port_id, uint16_t nb_rx_q,
>
>                     uint16_t nb_tx_q,
>
>                                      const struct rte_eth_conf *dev_conf)
>
>                        {
>
>                     @@ -510,8 +535,7 @@ rte_eth_dev_check_mq_mode(uint8_t port_id,
>
>                     uint16_t nb_rx_q, uint16_t nb_tx_q,
>
>                              if (RTE_ETH_DEV_SRIOV(dev).active != 0) {
>
>                                /* check multi-queue mode */
>
>                     -        if ((dev_conf->rxmode.mq_mode == ETH_MQ_RX_RSS) ||
>
>                     -            (dev_conf->rxmode.mq_mode == ETH_MQ_RX_DCB) ||
>
>                     +        if ((dev_conf->rxmode.mq_mode == ETH_MQ_RX_DCB) ||
>
>                                    (dev_conf->rxmode.mq_mode == ETH_MQ_RX_DCB_RSS) ||
>
>                                    (dev_conf->txmode.mq_mode == ETH_MQ_TX_DCB)) {
>
>                                    /* SRIOV only works in VMDq enable mode */ @@ -525,7
>
>                     +549,6 @@ rte_eth_dev_check_mq_mode(uint8_t port_id, uint16_t
>
>                     nb_rx_q, uint16_t nb_tx_q,
>
>                                }
>
>                                  switch (dev_conf->rxmode.mq_mode) {
>
>                     -        case ETH_MQ_RX_VMDQ_RSS:
>
>                                case ETH_MQ_RX_VMDQ_DCB:
>
>                                case ETH_MQ_RX_VMDQ_DCB_RSS:
>
>                                    /* DCB/RSS VMDQ in SRIOV mode, not implement yet */ @@
>
>                     -534,6 +557,25 @@ rte_eth_dev_check_mq_mode(uint8_t port_id,
>
>             uint16_t
>
>                     nb_rx_q, uint16_t nb_tx_q,
>
>                                            "unsupported VMDQ mq_mode rx %u\n",
>
>                                            port_id, dev_conf->rxmode.mq_mode);
>
>                                    return (-EINVAL);
>
>                     +        case ETH_MQ_RX_RSS:
>
>                     +            PMD_DEBUG_TRACE("ethdev port_id=%" PRIu8
>
>                     +                    " SRIOV active, "
>
>                     +                    "Rx mq mode is changed from:"
>
>                     +                    "mq_mode %u into VMDQ mq_mode %u\n",
>
>                     +                    port_id,
>
>                     +                    dev_conf->rxmode.mq_mode,
>
>                     +                    dev->data->dev_conf.rxmode.mq_mode);
>
>                     +        case ETH_MQ_RX_VMDQ_RSS:
>
>                     +            dev->data->dev_conf.rxmode.mq_mode =
>
>             ETH_MQ_RX_VMDQ_RSS;
>
>                     +            if (nb_rx_q <= RTE_ETH_DEV_SRIOV(dev).nb_q_per_pool)
>
>                     +                if (rte_eth_dev_check_vf_rss_rxq_num(port_id,
>
>                     nb_rx_q) != 0) {
>
>                     +                    PMD_DEBUG_TRACE("ethdev port_id=%d"
>
>                     +                        " SRIOV active, invalid queue"
>
>                     +                        " number for VMDQ RSS\n",
>
>                     +                        port_id);
>
>                   
>
>                 Some nitpicking here: I'd add the allowed values descriptions to the
>
>                 error message. Something like: "invalid queue number for VMDQ RSS.
>
>                 Allowed values are 1, 2 or 4\n".
>
>                   
>
>                     +                    return -EINVAL;
>
>                     +                }
>
>                     +            break;
>
>                                default: /* ETH_MQ_RX_VMDQ_ONLY or ETH_MQ_RX_NONE */
>
>                                    /* if nothing mq mode configure, use default scheme */
>
>                                    dev->data->dev_conf.rxmode.mq_mode =
>
>                     ETH_MQ_RX_VMDQ_ONLY; @@ -553,8 +595,6 @@
>
>                     rte_eth_dev_check_mq_mode(uint8_t port_id, uint16_t nb_rx_q,
>
>             uint16_t nb_tx_q,
>
>                                default: /* ETH_MQ_TX_VMDQ_ONLY or ETH_MQ_TX_NONE */
>
>                                    /* if nothing mq mode configure, use default scheme */
>
>                                    dev->data->dev_conf.txmode.mq_mode =
>
>             ETH_MQ_TX_VMDQ_ONLY;
>
>                     -            if (RTE_ETH_DEV_SRIOV(dev).nb_q_per_pool > 1)
>
>                     -                RTE_ETH_DEV_SRIOV(dev).nb_q_per_pool = 1;
>
>                   
>
>                 I'm not sure u may just remove it. These lines originally belong to a
>
>                 different flow. Are u sure u can remove them like that? What if the
>
>                 mq_mode is ETH_MQ_RX_NONE and nb_q_per_pool has been initialized
>
>             to 4
>
>                 or 8 in ixgbe_pf_host_init()?
>
>               
>
>             I misread the patch - these lines belong to the txmode.mq_mode switch case.
>
>             I think it's ok to remove these really strange lines here. And when I look at it i
>
>             think for the similar reasons the similar lines should be removed in the Rx
>
>             case too: consider non-RSS case with MQ DCB Tx configuration.
>
>               
>
>         I search code in this function, only one place has
>
>         " if (RTE_ETH_DEV_SRIOV(dev).nb_q_per_pool > 1)
>
>                     RTE_ETH_DEV_SRIOV(dev).nb_q_per_pool = 1;"
>
>           
>
>         The only place is default branch, which is for rx_none, or vmdq_only mode,
>
>
>     Here is a snippet of an rte_eth_dev_check_mq_mode() from the
>     current master:
>
>                     switch (dev_conf->rxmode.mq_mode) {
>
>                     case ETH_MQ_RX_VMDQ_RSS:
>
>                     case ETH_MQ_RX_VMDQ_DCB:
>
>                     case ETH_MQ_RX_VMDQ_DCB_RSS:
>
>                             /* DCB/RSS VMDQ in SRIOV mode, not implement yet */
>
>                             PMD_DEBUG_TRACE("ethdev port_id=%" PRIu8
>
>                                            " SRIOV active, "
>
>                                            "unsupported VMDQ mq_mode rx %u\n",
>
>                                            port_id, dev_conf->rxmode.mq_mode);
>
>                             return (-EINVAL);
>
>                     default: /* ETH_MQ_RX_VMDQ_ONLY or ETH_MQ_RX_NONE */
>
>                             /* if nothing mq mode configure, use default scheme */
>
>                             dev->data->dev_conf.rxmode.mq_mode = ETH_MQ_RX_VMDQ_ONLY;
>
>                             *if (RTE_ETH_DEV_SRIOV(dev).nb_q_per_pool > 1)                 <---- This is one*
>
>     *                                RTE_ETH_DEV_SRIOV(dev).nb_q_per_pool = 1;*
>
>                             break;
>
>                     }
>
>       
>
>                     switch (dev_conf->txmode.mq_mode) {
>
>                     case ETH_MQ_TX_VMDQ_DCB:
>
>                             /* DCB VMDQ in SRIOV mode, not implement yet */
>
>                             PMD_DEBUG_TRACE("ethdev port_id=%" PRIu8
>
>                                            " SRIOV active, "
>
>                                            "unsupported VMDQ mq_mode tx %u\n",
>
>                                            port_id, dev_conf->txmode.mq_mode);
>
>                             return (-EINVAL);
>
>                     default: /* ETH_MQ_TX_VMDQ_ONLY or ETH_MQ_TX_NONE */
>
>                             /* if nothing mq mode configure, use default scheme */
>
>                             dev->data->dev_conf.txmode.mq_mode = ETH_MQ_TX_VMDQ_ONLY;
>
>                             if (RTE_ETH_DEV_SRIOV(dev).nb_q_per_pool > 1)              <------ This is two. This is what your patch is removing
>
>                                     RTE_ETH_DEV_SRIOV(dev).nb_q_per_pool = 1;
>
>                             break;
>
>                     }
>
>
>
>
>     Changchun: yes you are correct, what I mean in my last response is
>     that only one place AFTER my removal, so there are 2 places before
>     my removal.
>     no controversial here.
>
>
>       
>
>     We don't need remove this, as it should assign as 1 because it did use 1 queue per pool.
>
>
>     And why is that? Just because RSS was not enabled? And what if a
>     user wants multiple Tx queues? Mode 1100b of MRQE for instance?
>
>     Changchun: I can explain why I need this change(remove the second
>     place) here,
>
>
> I understood why u needed it in the first place. I just say that for 
> exactly the same reasons u need to remove the "first place" too. ;)
>
> Changchun: then I will try to explain why I can’t remove the first place J
>
> When the rx mode is ETH_MQ_RX_NONE and tx mode is ETH_MQ_TX_NONE,
>
> The function ixgbe_pf_host_init still set the nb_q_per_pool into 2 or 
> 4 or 8 according to max vf num,
>
> (actually at that point, it has no knowledge of what is the rx and tx 
> configuration value, so have to just set
>
> an estimated (and not so accurate) value according to the max vf num)
>
> then in the check_mq_mode function, need further refine this value 
> according to a few factors:
>
> sriov.active, and rxmode.mq_mode.
>
> When it finds the rx mode is RX_NONE, and the nb_q_per_pool is larger 
> than 1, then it should refine to 1.
>
> So if I remove the first place, VMDQ_RSS case works well, but I break 
> the case of RX_NONE.
>
> So I think we can’t treat rx path and tx path in absolutely same way 
> here, i.e. if you add it in the first place(rx path) then you need 
> also add it in the second place(tx path)
>
> Vice versa,
>
> that’s my understanding J
>

And now consider the case when rx_mode == RSS_NONE (since user has 
configured only a single Rx queue) and tx_mode == TX_DCB (user has 
configured 4 Tx queues and requested the above Tx mode). After your 
patch the nb_q_per_pool will still be set to 1 while it should have 
remained 4 because u want a pool to support 4 queues (MRQC.MRQE == 
1010b) but u will configure the PSRTYPE[n].RQPL for this pool to 0.

> Thanks
>
> Changchun
>

  reply	other threads:[~2015-01-13  9:00 UTC|newest]

Thread overview: 144+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-12-15  2:56 [dpdk-dev] [PATCH 0/6] Enable VF RSS for Niantic Ouyang Changchun
2014-12-15  2:57 ` [dpdk-dev] [PATCH 1/6] ixgbe: Code cleanup Ouyang Changchun
2014-12-15  2:57 ` [dpdk-dev] [PATCH 2/6] ixgbe: Negotiate VF API version Ouyang Changchun
2014-12-15  2:57 ` [dpdk-dev] [PATCH 3/6] ixgbe: Get VF queue number Ouyang Changchun
2014-12-15  2:57 ` [dpdk-dev] [PATCH 4/6] ether: Check VMDq RSS mode Ouyang Changchun
2014-12-15  2:57 ` [dpdk-dev] [PATCH 5/6] ixgbe: Config VF RSS Ouyang Changchun
2014-12-15  2:57 ` [dpdk-dev] [PATCH 6/6] testpmd: Set Rx VMDq RSS mode Ouyang Changchun
2014-12-15 10:55 ` [dpdk-dev] [PATCH 0/6] Enable VF RSS for Niantic Bruce Richardson
2014-12-16  0:58   ` Ouyang, Changchun
2014-12-24  2:56 ` [dpdk-dev] [PATCH v2 " Ouyang Changchun
2014-12-24  2:56   ` [dpdk-dev] [PATCH v2 1/6] ixgbe: Code cleanup Ouyang Changchun
2014-12-24  3:08     ` Zhang, Helin
2014-12-24  3:22       ` Ouyang, Changchun
2014-12-24  3:41         ` Zhang, Helin
2014-12-24  3:50           ` Ouyang, Changchun
2014-12-24  3:53             ` Zhang, Helin
2014-12-24  4:46               ` Ouyang, Changchun
2014-12-24  2:56   ` [dpdk-dev] [PATCH v2 2/6] ixgbe: Negotiate VF API version Ouyang Changchun
2014-12-24  2:56   ` [dpdk-dev] [PATCH v2 3/6] ixgbe: Get VF queue number Ouyang Changchun
2014-12-24  2:56   ` [dpdk-dev] [PATCH v2 4/6] ether: Check VMDq RSS mode Ouyang Changchun
2014-12-24  2:56   ` [dpdk-dev] [PATCH v2 5/6] ixgbe: Config VF RSS Ouyang Changchun
2014-12-24  2:56   ` [dpdk-dev] [PATCH v2 6/6] testpmd: Set Rx VMDq RSS mode Ouyang Changchun
2014-12-24  5:22   ` [dpdk-dev] [PATCH v3 0/6] Enable VF RSS for Niantic Ouyang Changchun
2014-12-24  5:22     ` [dpdk-dev] [PATCH v3 1/6] ixgbe: Code cleanup Ouyang Changchun
2014-12-24  5:23     ` [dpdk-dev] [PATCH v3 2/6] ixgbe: Negotiate VF API version Ouyang Changchun
2014-12-24  5:23     ` [dpdk-dev] [PATCH v3 3/6] ixgbe: Get VF queue number Ouyang Changchun
2014-12-24  5:23     ` [dpdk-dev] [PATCH v3 4/6] ether: Check VMDq RSS mode Ouyang Changchun
2014-12-24  5:23     ` [dpdk-dev] [PATCH v3 5/6] ixgbe: Config VF RSS Ouyang Changchun
2014-12-24 10:39       ` Vlad Zolotarov
2014-12-25  2:14         ` Ouyang, Changchun
2014-12-25 13:13           ` Vlad Zolotarov
2014-12-26  2:07             ` Ouyang, Changchun
2014-12-25  2:43         ` Ouyang, Changchun
2014-12-25 13:20           ` Vlad Zolotarov
2014-12-26  1:52             ` Ouyang, Changchun
2014-12-26  6:49               ` Vladislav Zolotarov
2014-12-26  7:26                 ` Ouyang, Changchun
2014-12-26  7:37                   ` Vladislav Zolotarov
2014-12-26  8:45                     ` Ouyang, Changchun
2014-12-28 10:14                       ` Vlad Zolotarov
2015-01-05 10:29               ` Bruce Richardson
2015-01-06  1:00                 ` Ouyang, Changchun
2014-12-25 13:38           ` Vlad Zolotarov
2014-12-26  1:26             ` Ouyang, Changchun
2015-01-04  2:10       ` Liang, Cunming
2015-01-04  6:25         ` Ouyang, Changchun
2014-12-24  5:23     ` [dpdk-dev] [PATCH v3 6/6] testpmd: Set Rx VMDq RSS mode Ouyang Changchun
2014-12-24  9:59     ` [dpdk-dev] [PATCH v3 0/6] Enable VF RSS for Niantic Vlad Zolotarov
2014-12-25  1:46       ` Ouyang, Changchun
2015-01-05 10:38         ` Bruce Richardson
2015-01-05 13:02           ` Vlad Zolotarov
2015-01-06  1:11             ` Ouyang, Changchun
2015-01-06 11:18               ` Vlad Zolotarov
2015-01-06 11:18               ` Vlad Zolotarov
2015-01-06  1:04           ` Ouyang, Changchun
2014-12-24 10:49     ` Vlad Zolotarov
2014-12-25  2:26       ` Ouyang, Changchun
2014-12-25 12:46         ` Vlad Zolotarov
2014-12-26  2:37           ` Ouyang, Changchun
     [not found]             ` <CAOYyTHbrB-VinN5ZEd1tYTnS7_GhCT1jiHiZzNKkQUEJ1rG79w@mail.gmail.com>
2014-12-26  5:16               ` Vladislav Zolotarov
2014-12-26  5:25                 ` Ouyang, Changchun
2015-01-04  7:18     ` [dpdk-dev] [PATCH v4 " Ouyang Changchun
2015-01-04  7:18       ` [dpdk-dev] [PATCH v4 1/6] ixgbe: Code cleanup Ouyang Changchun
2015-01-04  8:22         ` Vlad Zolotarov
2015-01-04  7:18       ` [dpdk-dev] [PATCH v4 2/6] ixgbe: Negotiate VF API version Ouyang Changchun
2015-01-04  8:26         ` Vlad Zolotarov
2015-01-04  8:30           ` Vlad Zolotarov
2015-01-04  8:37             ` Ouyang, Changchun
2015-01-04  8:40               ` Vlad Zolotarov
2015-01-04  8:51                 ` Ouyang, Changchun
2015-01-04  9:37                   ` Vlad Zolotarov
2015-01-04  7:18       ` [dpdk-dev] [PATCH v4 3/6] ixgbe: Get VF queue number Ouyang Changchun
2015-01-04  8:38         ` Vlad Zolotarov
2015-01-05  2:59           ` Ouyang, Changchun
2015-01-05 10:07             ` Vlad Zolotarov
2015-01-06  1:54               ` Ouyang, Changchun
2015-01-06 11:26                 ` Vlad Zolotarov
2015-01-07  1:18                   ` Ouyang, Changchun
2015-01-04  7:18       ` [dpdk-dev] [PATCH v4 4/6] ether: Check VMDq RSS mode Ouyang Changchun
2015-01-04  8:45         ` Vlad Zolotarov
2015-01-04  8:58           ` Ouyang, Changchun
2015-01-04  9:45             ` Vlad Zolotarov
2015-01-05  1:00               ` Ouyang, Changchun
2015-01-05 10:09                 ` Vlad Zolotarov
2015-01-06  1:56                   ` Ouyang, Changchun
2015-01-06 19:56                     ` Vlad Zolotarov
2015-01-07  2:28                       ` Ouyang, Changchun
2015-01-04  7:18       ` [dpdk-dev] [PATCH v4 5/6] ixgbe: Config VF RSS Ouyang Changchun
2015-01-04  7:18       ` [dpdk-dev] [PATCH v4 6/6] testpmd: Set Rx VMDq RSS mode Ouyang Changchun
2015-01-04  8:49         ` Vlad Zolotarov
2015-01-04  9:01           ` Ouyang, Changchun
2015-01-04  9:46             ` Vlad Zolotarov
2015-01-05  2:38               ` Ouyang, Changchun
2015-01-05 10:12                 ` Vlad Zolotarov
2015-01-06  2:01                   ` Ouyang, Changchun
2015-01-06 12:53                     ` Vlad Zolotarov
2015-01-07  1:50                       ` Ouyang, Changchun
2015-01-07  6:32       ` [dpdk-dev] [PATCH v5 0/6] Enable VF RSS for Niantic Ouyang Changchun
2015-01-07  6:32         ` [dpdk-dev] [PATCH v5 1/6] ixgbe: Code cleanup Ouyang Changchun
2015-01-07  6:32         ` [dpdk-dev] [PATCH v5 2/6] ixgbe: Negotiate VF API version Ouyang Changchun
2015-01-07  6:32         ` [dpdk-dev] [PATCH v5 3/6] ixgbe: Get VF queue number Ouyang Changchun
2015-01-08  9:01           ` Vlad Zolotarov
2015-01-07  6:32         ` [dpdk-dev] [PATCH v5 4/6] ether: Check VMDq RSS mode Ouyang Changchun
2015-01-08  9:19           ` Vlad Zolotarov
2015-01-08 18:48             ` Vlad Zolotarov
2015-01-09  5:54               ` Ouyang, Changchun
2015-01-09 13:49                 ` Vlad Zolotarov
2015-01-12  3:41                   ` Ouyang, Changchun
2015-01-12 13:58                     ` Vlad Zolotarov
2015-01-13  1:50                       ` Ouyang, Changchun
2015-01-13  9:00                         ` Vlad Zolotarov [this message]
2015-01-14  0:44                           ` Ouyang, Changchun
2015-01-07  6:32         ` [dpdk-dev] [PATCH v5 5/6] ixgbe: Config VF RSS Ouyang Changchun
2015-01-08  9:43           ` Vlad Zolotarov
2015-01-09  6:07             ` Ouyang, Changchun
2015-01-09 14:01               ` Vlad Zolotarov
2015-01-12  5:11                 ` Ouyang, Changchun
2015-01-07  6:32         ` [dpdk-dev] [PATCH v5 6/6] testpmd: Set Rx VMDq RSS mode Ouyang Changchun
2015-01-08  9:46           ` Vlad Zolotarov
2015-01-08  9:56         ` [dpdk-dev] [PATCH v5 0/6] Enable VF RSS for Niantic Vlad Zolotarov
2015-01-18 21:58           ` Thomas Monjalon
2015-01-19  9:40             ` Vlad Zolotarov
2015-01-12  5:59         ` [dpdk-dev] [PATCH v6 " Ouyang Changchun
2015-01-12  5:59           ` [dpdk-dev] [PATCH v6 1/6] ixgbe: Code cleanup Ouyang Changchun
2015-01-12  5:59           ` [dpdk-dev] [PATCH v6 2/6] ixgbe: Negotiate VF API version Ouyang Changchun
2015-01-12  5:59           ` [dpdk-dev] [PATCH v6 3/6] ixgbe: Get VF queue number Ouyang Changchun
2015-01-19  9:13             ` Wodkowski, PawelX
2015-01-20  0:54               ` Ouyang, Changchun
2015-01-12  5:59           ` [dpdk-dev] [PATCH v6 4/6] ether: Check VMDq RSS mode Ouyang Changchun
2015-01-12 14:06             ` Vlad Zolotarov
2015-01-18 22:04             ` Thomas Monjalon
2015-01-19 10:31             ` Wodkowski, PawelX
2015-01-20  1:03               ` Ouyang, Changchun
2015-01-12  5:59           ` [dpdk-dev] [PATCH v6 5/6] ixgbe: Config VF RSS Ouyang Changchun
2015-01-12 14:04             ` Vlad Zolotarov
2015-01-20  9:35             ` Wodkowski, PawelX
2015-01-21  2:43               ` Ouyang, Changchun
2015-01-21  8:44                 ` Wodkowski, PawelX
2015-01-22 12:59                   ` Vlad Zolotarov
2015-01-22 13:19                     ` Wodkowski, PawelX
2015-01-12  5:59           ` [dpdk-dev] [PATCH v6 6/6] testpmd: Set Rx VMDq RSS mode Ouyang Changchun
2015-01-12 14:05             ` Vlad Zolotarov
2015-01-18 22:24           ` [dpdk-dev] [PATCH v6 0/6] Enable VF RSS for Niantic Thomas Monjalon
2015-01-19  4:51             ` Ouyang, Changchun

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=54B4DE98.5030607@cloudius-systems.com \
    --to=vladz@cloudius-systems.com \
    --cc=changchun.ouyang@intel.com \
    --cc=dev@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).