From: Ferruh Yigit <ferruh.yigit@amd.com>
To: Jie Hai <haijie1@huawei.com>, dev@dpdk.org
Cc: lihuisong@huawei.com, fengchengwen@huawei.com,
liuyonglong@huawei.com, huangdengdui@huawei.com
Subject: Re: [PATCH v2 2/7] ethdev: add telemetry cmd for registers
Date: Wed, 7 Feb 2024 17:03:26 +0000 [thread overview]
Message-ID: <55e32a89-eca3-49a9-9ddd-32efe5684961@amd.com> (raw)
In-Reply-To: <20240205105151.275591-3-haijie1@huawei.com>
On 2/5/2024 10:51 AM, Jie Hai wrote:
> This patch adds a telemetry command for registers dump,
> and supports get registers with specified names.
> The length of the string exported by telemetry is limited
> by MAX_OUTPUT_LEN. Therefore, the filter should be more
> precise.
>
> An example usage is shown below:
> --> /ethdev/regs,0,INTR
> {
> "/ethdev/regs": {
> "registers_length": 318,
> "registers_width": 4,
> "register_offset": "0x0",
> "version": "0x1140011",
> "group_0": {
> "HNS3_CMDQ_INTR_STS_REG": "0x0",
> "HNS3_CMDQ_INTR_EN_REG": "0x2",
> "HNS3_CMDQ_INTR_GEN_REG": "0x0",
> "queue_0_HNS3_TQP_INTR_CTRL_REG": "0x0",
> "queue_0_HNS3_TQP_INTR_GL0_REG": "0xa",
> "queue_0_HNS3_TQP_INTR_GL1_REG": "0xa",
> "queue_0_HNS3_TQP_INTR_GL2_REG": "0x0",
> ...
> },
> "group_1": {
> ...
> },
> ...
> }
>
What is the intention of 'RTE_TEL_MAX_DICT_ENTRIES' and grouping above?
> or as below if the number of registers not exceed the
> RTE_TEL_MAX_DICT_ENTRIES:
> --> /ethdev/regs,0,ppp
> {
> "/ethdev/regs": {
> "registers_length": 156,
> "registers_width": 4,
> "register_offset": "0x0",
> "version": "0x1140011",
> "ppp_key_drop_num": "0x0",
> "ppp_rlt_drop_num": "0x0",
> "ssu_ppp_mac_key_num_l": "0x1",
> "ssu_ppp_mac_key_num_h": "0x0",
> "ssu_ppp_host_key_num_l": "0x1",
> "ssu_ppp_host_key_num_h": "0x0",
> "ppp_ssu_mac_rlt_num_l": "0x1",
> ...
> }
> }
>
> Signed-off-by: Jie Hai <haijie1@huawei.com>
next prev parent reply other threads:[~2024-02-07 17:03 UTC|newest]
Thread overview: 69+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-12-14 1:56 [PATCH] ethdev: add dump regs for telemetry Jie Hai
2023-12-14 12:49 ` Ferruh Yigit
2024-01-09 2:19 ` Jie Hai
2024-01-09 2:41 ` Jie Hai
2024-01-09 18:06 ` Ferruh Yigit
2024-01-10 1:38 ` fengchengwen
2024-01-10 12:15 ` Ferruh Yigit
2024-01-10 14:09 ` Thomas Monjalon
2024-01-10 15:48 ` Ferruh Yigit
2024-01-11 1:55 ` fengchengwen
2024-01-11 11:11 ` Ferruh Yigit
2024-01-11 12:43 ` fengchengwen
2024-02-05 10:51 ` [PATCH v2 0/7] support dump reigser names and filter them Jie Hai
2024-02-05 10:51 ` [PATCH v2 1/7] ethdev: support report register names and filter Jie Hai
2024-02-07 17:00 ` Ferruh Yigit
2024-02-20 8:43 ` Jie Hai
2024-02-05 10:51 ` [PATCH v2 2/7] ethdev: add telemetry cmd for registers Jie Hai
2024-02-07 17:03 ` Ferruh Yigit [this message]
2024-02-22 9:01 ` Jie Hai
2024-02-05 10:51 ` [PATCH v2 3/7] net/hns3: fix dump counter of registers Jie Hai
2024-02-05 10:51 ` [PATCH v2 4/7] net/hns3: remove dump format " Jie Hai
2024-02-05 10:51 ` [PATCH v2 5/7] net/hns3: add names for registers Jie Hai
2024-02-05 10:51 ` [PATCH v2 6/7] net/hns3: support filter directly accessed registers Jie Hai
2024-02-05 10:51 ` [PATCH v2 7/7] net/hns3: support filter dump of registers Jie Hai
2024-02-20 10:58 ` [PATCH v3 0/7] support dump reigser names and filter them Jie Hai
2024-02-20 10:58 ` [PATCH v3 1/7] ethdev: support report register names and filter Jie Hai
2024-02-20 15:09 ` Stephen Hemminger
2024-02-26 2:33 ` Jie Hai
2024-02-20 15:13 ` Stephen Hemminger
2024-02-26 2:41 ` Jie Hai
2024-02-20 15:14 ` Stephen Hemminger
2024-02-26 2:57 ` Jie Hai
2024-02-20 15:14 ` Stephen Hemminger
2024-02-26 2:33 ` Jie Hai
2024-02-20 10:58 ` [PATCH v3 2/7] ethdev: add telemetry cmd for registers Jie Hai
2024-02-20 10:58 ` [PATCH v3 3/7] net/hns3: fix dump counter of registers Jie Hai
2024-02-20 10:58 ` [PATCH v3 4/7] net/hns3: remove dump format " Jie Hai
2024-02-20 10:58 ` [PATCH v3 5/7] net/hns3: add names for registers Jie Hai
2024-02-20 10:58 ` [PATCH v3 6/7] net/hns3: support filter directly accessed registers Jie Hai
2024-02-20 10:58 ` [PATCH v3 7/7] net/hns3: support filter dump of registers Jie Hai
2024-02-26 3:07 ` [PATCH v4 0/7] support dump reigser names and filter them Jie Hai
2024-02-26 3:07 ` [PATCH v4 1/7] ethdev: support report register names and filter Jie Hai
2024-02-26 8:01 ` fengchengwen
2024-03-06 7:22 ` Jie Hai
2024-02-29 9:52 ` Thomas Monjalon
2024-03-05 7:45 ` Jie Hai
2024-02-26 3:07 ` [PATCH v4 2/7] ethdev: add telemetry cmd for registers Jie Hai
2024-02-26 9:09 ` fengchengwen
2024-03-06 7:18 ` Jie Hai
2024-02-26 3:07 ` [PATCH v4 3/7] net/hns3: fix dump counter of registers Jie Hai
2024-02-26 3:07 ` [PATCH v4 4/7] net/hns3: remove dump format " Jie Hai
2024-02-26 3:07 ` [PATCH v4 5/7] net/hns3: add names for registers Jie Hai
2024-02-26 3:07 ` [PATCH v4 6/7] net/hns3: support filter directly accessed registers Jie Hai
2024-02-26 3:07 ` [PATCH v4 7/7] net/hns3: support filter dump of registers Jie Hai
2024-03-07 3:02 ` [PATCH v5 0/7] support dump reigser names and filter them Jie Hai
2024-03-07 3:02 ` [PATCH v5 1/7] ethdev: support report register names and filter Jie Hai
2024-03-08 8:09 ` lihuisong (C)
2024-03-07 3:02 ` [PATCH v5 2/7] ethdev: add telemetry cmd for registers Jie Hai
2024-03-08 8:48 ` lihuisong (C)
2024-03-07 3:02 ` [PATCH v5 3/7] net/hns3: fix dump counter of registers Jie Hai
2024-03-08 8:49 ` lihuisong (C)
2024-03-07 3:02 ` [PATCH v5 4/7] net/hns3: remove dump format " Jie Hai
2024-03-08 9:17 ` lihuisong (C)
2024-03-07 3:02 ` [PATCH v5 5/7] net/hns3: add names for registers Jie Hai
2024-03-08 9:41 ` lihuisong (C)
2024-03-08 10:24 ` lihuisong (C)
2024-03-07 3:02 ` [PATCH v5 6/7] net/hns3: support filter directly accessed registers Jie Hai
2024-03-08 9:41 ` lihuisong (C)
2024-03-07 3:02 ` [PATCH v5 7/7] net/hns3: support filter dump of registers Jie Hai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=55e32a89-eca3-49a9-9ddd-32efe5684961@amd.com \
--to=ferruh.yigit@amd.com \
--cc=dev@dpdk.org \
--cc=fengchengwen@huawei.com \
--cc=haijie1@huawei.com \
--cc=huangdengdui@huawei.com \
--cc=lihuisong@huawei.com \
--cc=liuyonglong@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).