From: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
To: Declan Doherty <declan.doherty@intel.com>, dev@dpdk.org
Subject: Re: [dpdk-dev] [PATCH v4 0/6] Crypto API and device framework
Date: Tue, 3 Nov 2015 21:20:21 +0000 [thread overview]
Message-ID: <56392515.7080306@intel.com> (raw)
In-Reply-To: <1446572746-26207-1-git-send-email-declan.doherty@intel.com>
On 03/11/2015 17:45, Declan Doherty wrote:
> This series of patches defines a set of application burst oriented APIs for
> asynchronous symmetric cryptographic functions within DPDK. It also contains a
> poll mode driver cryptographic device framework for the implementation of
> crypto devices within DPDK.
>
> In the patch set we also have included 2 reference implementations of crypto
> PMDs. Currently both implementations support AES128-CBC with
> HMAC_SHA1/SHA256/SHA512 authentication operations. The first device is a purely
> software PMD based on Intel's multi-buffer library, which utilises both
> AES-NI instructions and vector operations to accelerate crypto operations and
> the second PMD utilises Intel's Quick Assist Technology (on DH895xxC) to provide
> hardware accelerated crypto operations.
>
> The API set supports two functional modes of operation:
>
> 1, A session oriented mode. In this mode the user creates a crypto session
> which defines all the immutable data required to perform a particular crypto
> operation in advance, including cipher/hash algorithms and operations to be
> performed as well as the keys to used etc. The session is then referenced by
> the crypto operation data structure which is a data structure specific to each
> mbuf. It is contains all mutable data about the cryto operation to be
> performed, such as data offsets and lengths into the mbuf's data payload for
> cipher and hash operations to be performed.
>
> 2, A session-less mode. In this mode the user is able to provision crypto
> operations on an mbuf without the need to have a cached session created in
> advance, but at the cost of entailing the overhead of calculating
> authentication pre-computes and preforming key expansions in-line with the
> crypto operation. The crypto xform chain is directly attached to the op struct
> in this mode, so the op struct now contains all of the immutable crypto operation
> parameters that would be normally set within a session. Once all mutable and
> immutable parameters are set the crypto operation data structure can be attached
> to the specified mbuf and enqueued on a specified crypto device for processing.
>
> The patch set contains the following features:
> - Crypto device APIs and device framework
> - Implementation of a software crypto PMD based on multi-buffer library
> - Implementation of a hardware crypto PMD baed on Intel QAT(DH895xxC)
> - Unit and performance test's which give and example of utilising the crypto API's.
> - Sample application which performs crypto operations on the IP payload of the
> packets being forwarded
>
> Current Status:
> There is no support for chained mbuf's and as mentioned above the PMD's
> have currently implemented support for AES128-CBC/AES256-CBC/AES512-CBC
> and HMAC_SHA1/SHA256/SHA512.
>
> v4:
> - Some more EOF whitespace and checkpatch fixes
>
> v3:
> - Fixes a document build error, which I missed in the V2
> - Fixes for remaining checkpatch errors
> - Disables QAT and AESNI_MB PMD being build by default as they have external
> library dependences
>
> v2:
> - Introduces a new library to support attaching offload operations to a mbuf
> - Remove unused APIs from cryptodev
> - PMD code refactor due to new rte_mbuf_offload structure
> - General bug fixes and code tidy up
>
>
> Declan Doherty (6):
> cryptodev: Initial DPDK Crypto APIs and device framework release
> mbuf_offload: library to support attaching offloads to a mbuf
> qat_crypto_pmd: Addition of a new QAT DPDK PMD.
> aesni_mb_pmd: Initial implementation of multi buffer based crypto
> device
> app/test: add cryptodev unit and performance tests
> l2fwd-crypto: crypto
>
>
Series Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
next prev parent reply other threads:[~2015-11-03 21:20 UTC|newest]
Thread overview: 115+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-02 23:01 [dpdk-dev] [PATCH " Declan Doherty
2015-10-02 23:01 ` [dpdk-dev] [PATCH 1/6] cryptodev: Initial DPDK Crypto APIs and device framework release Declan Doherty
2015-10-21 9:24 ` Thomas Monjalon
2015-10-21 11:16 ` Declan Doherty
2015-10-02 23:01 ` [dpdk-dev] [PATCH 2/6] qat_crypto_pmd: Addition of a new QAT DPDK PMD Declan Doherty
2015-10-02 23:01 ` [dpdk-dev] [PATCH 3/6] aesni_mb_pmd: Initial implementation of multi buffer based crypto device Declan Doherty
2015-10-02 23:01 ` [dpdk-dev] [PATCH 4/6] docs: add getting started guides for multi-buffer pmd and qat pmd Declan Doherty
2015-10-21 11:34 ` Thomas Monjalon
2015-10-02 23:01 ` [dpdk-dev] [PATCH 5/6] app/test: add cryptodev unit and performance tests Declan Doherty
2015-10-02 23:01 ` [dpdk-dev] [PATCH 6/6] l2fwd-crypto: crypto Declan Doherty
2015-10-21 9:11 ` [dpdk-dev] [PATCH 0/6] Crypto API and device framework Declan Doherty
2015-10-30 12:59 ` [dpdk-dev] [PATCH v2 " Declan Doherty
2015-10-30 12:59 ` [dpdk-dev] [PATCH v2 1/6] cryptodev: Initial DPDK Crypto APIs and device framework release Declan Doherty
2015-10-30 12:59 ` [dpdk-dev] [PATCH v2 2/6] mbuf_offload: library to support attaching offloads to a mbuf Declan Doherty
2015-10-30 12:59 ` [dpdk-dev] [PATCH v2 3/6] qat_crypto_pmd: Addition of a new QAT DPDK PMD Declan Doherty
2015-10-30 12:59 ` [dpdk-dev] [PATCH v2 4/6] aesni_mb_pmd: Initial implementation of multi buffer based crypto device Declan Doherty
2015-10-30 12:59 ` [dpdk-dev] [PATCH v2 5/6] app/test: add cryptodev unit and performance tests Declan Doherty
2015-10-30 12:59 ` [dpdk-dev] [PATCH v2 6/6] l2fwd-crypto: crypto Declan Doherty
2015-10-30 16:08 ` [dpdk-dev] [PATCH v3 0/6] Crypto API and device framework Declan Doherty
2015-10-30 16:08 ` [dpdk-dev] [PATCH v3 1/6] cryptodev: Initial DPDK Crypto APIs and device framework release Declan Doherty
2015-10-30 16:08 ` [dpdk-dev] [PATCH v3 2/6] mbuf_offload: library to support attaching offloads to a mbuf Declan Doherty
2015-10-30 16:34 ` Ananyev, Konstantin
2015-10-30 16:08 ` [dpdk-dev] [PATCH v3 3/6] qat_crypto_pmd: Addition of a new QAT DPDK PMD Declan Doherty
2015-10-30 16:08 ` [dpdk-dev] [PATCH v3 4/6] aesni_mb_pmd: Initial implementation of multi buffer based crypto device Declan Doherty
2015-10-30 16:08 ` [dpdk-dev] [PATCH v3 5/6] app/test: add cryptodev unit and performance tests Declan Doherty
2015-10-30 16:08 ` [dpdk-dev] [PATCH v3 6/6] l2fwd-crypto: crypto Declan Doherty
2015-11-03 17:45 ` [dpdk-dev] [PATCH v4 0/6] Crypto API and device framework Declan Doherty
2015-11-03 17:45 ` [dpdk-dev] [PATCH v4 1/6] cryptodev: Initial DPDK Crypto APIs and device framework release Declan Doherty
2015-11-03 17:45 ` [dpdk-dev] [PATCH v4 2/6] mbuf_offload: library to support attaching offloads to a mbuf Declan Doherty
2015-11-03 17:45 ` [dpdk-dev] [PATCH v4 3/6] qat_crypto_pmd: Addition of a new QAT DPDK PMD Declan Doherty
2015-11-03 17:45 ` [dpdk-dev] [PATCH v4 4/6] aesni_mb_pmd: Initial implementation of multi buffer based crypto device Declan Doherty
2015-11-03 17:45 ` [dpdk-dev] [PATCH v4 5/6] app/test: add cryptodev unit and performance tests Declan Doherty
2015-11-03 17:45 ` [dpdk-dev] [PATCH v4 6/6] l2fwd-crypto: crypto Declan Doherty
2015-11-03 21:20 ` Sergio Gonzalez Monroy [this message]
2015-11-09 20:34 ` [dpdk-dev] [PATCH v5 00/10] Crypto API and device framework Declan Doherty
2015-11-09 20:34 ` [dpdk-dev] [PATCH v5 01/10] ethdev: rename macros to have RTE_ prefix Declan Doherty
2015-11-10 10:30 ` Bruce Richardson
2015-11-09 20:34 ` [dpdk-dev] [PATCH v5 02/10] ethdev: make error checking macros public Declan Doherty
2015-11-10 10:32 ` Bruce Richardson
2015-11-10 15:50 ` Adrien Mazarguil
2015-11-10 17:00 ` Declan Doherty
2015-11-09 20:34 ` [dpdk-dev] [PATCH v5 03/10] eal: add __rte_packed /__rte_aligned macros Declan Doherty
2015-11-09 20:34 ` [dpdk-dev] [PATCH v5 04/10] mbuf: add new marcos to get the physical address of data Declan Doherty
2015-11-09 20:34 ` [dpdk-dev] [PATCH v5 05/10] cryptodev: Initial DPDK Crypto APIs and device framework release Declan Doherty
2015-11-09 20:34 ` [dpdk-dev] [PATCH v5 06/10] mbuf_offload: library to support attaching offloads to a mbuf Declan Doherty
2015-11-09 20:34 ` [dpdk-dev] [PATCH v5 07/10] qat_crypto_pmd: Addition of a new QAT DPDK PMD Declan Doherty
2015-11-09 20:34 ` [dpdk-dev] [PATCH v5 08/10] aesni_mb_pmd: Initial implementation of multi buffer based crypto device Declan Doherty
2015-11-09 20:34 ` [dpdk-dev] [PATCH v5 09/10] app/test: add cryptodev unit and performance tests Declan Doherty
2015-11-09 20:34 ` [dpdk-dev] [PATCH v5 10/10] l2fwd-crypto: crypto Declan Doherty
2015-11-10 17:32 ` [dpdk-dev] [PATCH v6 00/10] Crypto API and device framework Declan Doherty
2015-11-10 17:32 ` [dpdk-dev] [PATCH v6 01/10] ethdev: rename macros to have RTE_ prefix Declan Doherty
2015-11-10 17:32 ` [dpdk-dev] [PATCH v6 02/10] ethdev: make error checking macros public Declan Doherty
2015-11-10 17:38 ` Adrien Mazarguil
2015-11-10 17:32 ` [dpdk-dev] [PATCH v6 03/10] eal: add __rte_packed /__rte_aligned macros Declan Doherty
2015-11-13 15:35 ` Thomas Monjalon
2015-11-13 15:41 ` Declan Doherty
2015-11-10 17:32 ` [dpdk-dev] [PATCH v6 04/10] mbuf: add new marcos to get the physical address of data Declan Doherty
2015-11-10 17:32 ` [dpdk-dev] [PATCH v6 05/10] cryptodev: Initial DPDK Crypto APIs and device framework release Declan Doherty
2015-11-13 15:44 ` Thomas Monjalon
2015-11-10 17:32 ` [dpdk-dev] [PATCH v6 06/10] mbuf_offload: library to support attaching offloads to a mbuf Declan Doherty
2015-11-13 15:59 ` Thomas Monjalon
2015-11-13 16:11 ` Thomas Monjalon
2015-11-10 17:32 ` [dpdk-dev] [PATCH v6 07/10] qat_crypto_pmd: Addition of a new QAT DPDK PMD Declan Doherty
2015-11-13 16:00 ` Thomas Monjalon
2015-11-13 16:25 ` Declan Doherty
2015-11-10 17:32 ` [dpdk-dev] [PATCH v6 08/10] aesni_mb_pmd: Initial implementation of multi buffer based crypto device Declan Doherty
2015-11-10 17:32 ` [dpdk-dev] [PATCH v6 09/10] app/test: add cryptodev unit and performance tests Declan Doherty
2015-11-10 17:32 ` [dpdk-dev] [PATCH v6 10/10] l2fwd-crypto: crypto Declan Doherty
2015-11-13 16:03 ` Thomas Monjalon
2015-11-13 18:58 ` [dpdk-dev] [PATCH v7 00/10] Crypto API and device framework Declan Doherty
2015-11-13 18:58 ` [dpdk-dev] [PATCH v7 01/10] ethdev: rename macros to have RTE_ prefix Declan Doherty
2015-11-17 14:44 ` Declan Doherty
2015-11-17 15:39 ` Thomas Monjalon
2015-11-17 16:04 ` [dpdk-dev] [PATCH v7.1 " Declan Doherty
2015-11-13 18:58 ` [dpdk-dev] [PATCH v7 02/10] ethdev: make error checking macros public Declan Doherty
2015-11-13 18:58 ` [dpdk-dev] [PATCH v7 03/10] eal: add __rte_packed /__rte_aligned macros Declan Doherty
2015-11-13 18:58 ` [dpdk-dev] [PATCH v7 04/10] mbuf: add new marcos to get the physical address of data Declan Doherty
2015-11-25 0:25 ` Thomas Monjalon
2015-11-13 18:58 ` [dpdk-dev] [PATCH v7 05/10] cryptodev: Initial DPDK Crypto APIs and device framework release Declan Doherty
2015-11-25 0:32 ` Thomas Monjalon
2015-11-13 18:58 ` [dpdk-dev] [PATCH v7 06/10] mbuf_offload: library to support attaching offloads to a mbuf Declan Doherty
2015-11-20 15:27 ` Olivier MATZ
2015-11-20 17:26 ` Declan Doherty
2015-11-23 9:10 ` Olivier MATZ
2015-11-23 11:52 ` Ananyev, Konstantin
2015-11-23 12:16 ` Declan Doherty
2015-11-23 13:08 ` Olivier MATZ
2015-11-23 14:17 ` Thomas Monjalon
2015-11-23 14:46 ` Thomas Monjalon
2015-11-23 15:47 ` Declan Doherty
2015-11-23 14:33 ` Declan Doherty
2015-11-13 18:58 ` [dpdk-dev] [PATCH v7 07/10] qat_crypto_pmd: Addition of a new QAT DPDK PMD Declan Doherty
2015-11-25 1:00 ` Thomas Monjalon
2015-11-25 9:16 ` Mcnamara, John
2015-11-25 10:34 ` Thomas Monjalon
2015-11-25 10:49 ` Thomas Monjalon
2015-11-25 10:59 ` Declan Doherty
2015-11-25 12:01 ` Mcnamara, John
2015-11-13 18:58 ` [dpdk-dev] [PATCH v7 08/10] aesni_mb_pmd: Initial implementation of multi buffer based crypto device Declan Doherty
2015-11-25 10:32 ` Thomas Monjalon
2015-11-13 18:58 ` [dpdk-dev] [PATCH v7 09/10] app/test: add cryptodev unit and performance tests Declan Doherty
2015-11-13 18:58 ` [dpdk-dev] [PATCH v7 10/10] l2fwd-crypto: crypto Declan Doherty
2015-11-25 1:03 ` Thomas Monjalon
2015-11-25 13:25 ` [dpdk-dev] [PATCH v8 00/10] Crypto API and device framework Declan Doherty
2015-11-25 13:25 ` [dpdk-dev] [PATCH v8 01/10] ethdev: rename macros to have RTE_ prefix Declan Doherty
2015-11-25 13:25 ` [dpdk-dev] [PATCH v8 02/10] ethdev: make error checking macros public Declan Doherty
2015-11-25 13:25 ` [dpdk-dev] [PATCH v8 03/10] eal: add __rte_packed /__rte_aligned macros Declan Doherty
2015-11-25 13:25 ` [dpdk-dev] [PATCH v8 04/10] mbuf: add new marcos to get the physical address of data Declan Doherty
2015-11-25 13:25 ` [dpdk-dev] [PATCH v8 05/10] cryptodev: Initial DPDK Crypto APIs and device framework release Declan Doherty
2015-11-25 13:25 ` [dpdk-dev] [PATCH v8 06/10] mbuf_offload: library to support attaching offloads to a mbuf Declan Doherty
2015-11-25 13:25 ` [dpdk-dev] [PATCH v8 07/10] qat_crypto_pmd: Addition of a new QAT DPDK PMD Declan Doherty
2015-11-25 13:25 ` [dpdk-dev] [PATCH v8 08/10] aesni_mb_pmd: Initial implementation of multi buffer based crypto device Declan Doherty
2015-11-25 13:25 ` [dpdk-dev] [PATCH v8 09/10] app/test: add cryptodev unit and performance tests Declan Doherty
2015-11-25 13:25 ` [dpdk-dev] [PATCH v8 10/10] l2fwd-crypto: crypto Declan Doherty
2015-11-25 17:44 ` [dpdk-dev] [PATCH v8 00/10] Crypto API and device framework Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56392515.7080306@intel.com \
--to=sergio.gonzalez.monroy@intel.com \
--cc=declan.doherty@intel.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).