From: Shreyansh jain <shreyansh.jain@nxp.com>
To: Jan Viktorin <viktorin@rehivetech.com>, <dev@dpdk.org>
Cc: <thomas.monjalon@6wind.com>, David Marchand <david.marchand@6wind.com>
Subject: Re: [dpdk-dev] [PATCH v1 01/15] eal: extract vdev infra
Date: Mon, 11 Jul 2016 18:59:48 +0530 [thread overview]
Message-ID: <57839F4C.40507@nxp.com> (raw)
In-Reply-To: <20160708190945.24225-2-viktorin@rehivetech.com>
Hi Jan,
Some comments.
On Saturday 09 July 2016 12:39 AM, Jan Viktorin wrote:
> Move all PMD_VDEV-specific code into a separate module and header
> file to not polute the generic code anymore. There is now a list
> of virtual devices available.
>
> The rte_vdev_driver integrates the original rte_driver inside
> (C inheritance). The rte_driver will be however change in the
> future to serve as a common base for all other types of drivers.
>
> The existing PMDs (PMD_VDEV) are to be modified later (there is
> no change for them at the moment).
>
> There is however a inconsistency. The functions rte_eal_vdev_init
> and rte_eal_vdev_uninit are still placed in the rte_dev.h (instead
> of the rte_vdev.h).
>
> Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
> ---
> lib/librte_eal/bsdapp/eal/Makefile | 1 +
> lib/librte_eal/common/Makefile | 2 +-
> lib/librte_eal/common/eal_common_dev.c | 54 +---------------
> lib/librte_eal/common/eal_common_vdev.c | 104 +++++++++++++++++++++++++++++++
> lib/librte_eal/common/include/rte_dev.h | 1 +
> lib/librte_eal/common/include/rte_vdev.h | 83 ++++++++++++++++++++++++
> lib/librte_eal/linuxapp/eal/Makefile | 1 +
> 7 files changed, 192 insertions(+), 54 deletions(-)
> create mode 100644 lib/librte_eal/common/eal_common_vdev.c
> create mode 100644 lib/librte_eal/common/include/rte_vdev.h
>
> diff --git a/lib/librte_eal/bsdapp/eal/Makefile b/lib/librte_eal/bsdapp/eal/Makefile
> index 698fa0a..b7e94a4 100644
> --- a/lib/librte_eal/bsdapp/eal/Makefile
> +++ b/lib/librte_eal/bsdapp/eal/Makefile
[...]
> diff --git a/lib/librte_eal/common/eal_common_vdev.c b/lib/librte_eal/common/eal_common_vdev.c
> new file mode 100644
> index 0000000..ea83c41
> --- /dev/null
> +++ b/lib/librte_eal/common/eal_common_vdev.c
> @@ -0,0 +1,104 @@
> +/*-
> + * BSD LICENSE
> + *
> + * Copyright(c) 2016 RehiveTech. All rights reserved.
> + *
> + * Redistribution and use in source and binary forms, with or without
> + * modification, are permitted provided that the following conditions
> + * are met:
> + *
> + * * Redistributions of source code must retain the above copyright
> + * notice, this list of conditions and the following disclaimer.
> + * * Redistributions in binary form must reproduce the above copyright
> + * notice, this list of conditions and the following disclaimer in
> + * the documentation and/or other materials provided with the
> + * distribution.
> + * * Neither the name of RehiveTech nor the names of its
> + * contributors may be used to endorse or promote products derived
> + * from this software without specific prior written permission.
> + *
> + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
> + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
> + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
> + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
> + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
> + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
> + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
> + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
> + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> + */
> +
> +#include <string.h>
> +#include <sys/queue.h>
> +#include <rte_vdev.h>
> +
> +struct vdev_driver_list vdev_driver_list =
> + TAILQ_HEAD_INITIALIZER(vdev_driver_list);
> +
> +/* register a driver */
> +void
> +rte_eal_vdrv_register(struct rte_vdev_driver *driver)
> +{
> + TAILQ_INSERT_TAIL(&vdev_driver_list, driver, next);
> +}
> +
> +/* unregister a driver */
> +void
> +rte_eal_vdrv_unregister(struct rte_vdev_driver *driver)
> +{
> + TAILQ_REMOVE(&vdev_driver_list, driver, next);
> +}
> +
> +int
> +rte_eal_vdev_init(const char *name, const char *args)
> +{
> + struct rte_vdev_driver *driver;
> +
> + if (name == NULL)
> + return -EINVAL;
> +
> + TAILQ_FOREACH(driver, &vdev_driver_list, next) {
> + if (driver->driver.type != PMD_VDEV)
> + continue;
Now that two separate lists for vdev and pdev exist, we don't need this check anymore.
In fact, PMD_VDEV might not even exist.
> +
> + /*
> + * search a driver prefix in virtual device name.
> + * For example, if the driver is pcap PMD, driver->name
> + * will be "eth_pcap", but "name" will be "eth_pcapN".
> + * So use strncmp to compare.
> + */
> + if (!strncmp(driver->driver.name, name, strlen(driver->driver.name)))
> + return driver->driver.init(name, args);
> + }
> +
> + RTE_LOG(ERR, EAL, "no driver found for %s\n", name);
> + return -EINVAL;
> +}
> +
> +int
> +rte_eal_vdev_uninit(const char *name)
> +{
> + struct rte_vdev_driver *driver;
> +
> + if (name == NULL)
> + return -EINVAL;
> +
> + TAILQ_FOREACH(driver, &vdev_driver_list, next) {
> + if (driver->driver.type != PMD_VDEV)
> + continue;
Same as above, redundant check.
> +
> + /*
> + * search a driver prefix in virtual device name.
> + * For example, if the driver is pcap PMD, driver->name
> + * will be "eth_pcap", but "name" will be "eth_pcapN".
> + * So use strncmp to compare.
> + */
> + if (!strncmp(driver->driver.name, name, strlen(driver->driver.name)))
> + return driver->driver.uninit(name);
> + }
> +
> + RTE_LOG(ERR, EAL, "no driver found for %s\n", name);
> + return -EINVAL;
> +}
> diff --git a/lib/librte_eal/common/include/rte_dev.h b/lib/librte_eal/common/include/rte_dev.h
> index b1c0520..2aeb752 100644
> --- a/lib/librte_eal/common/include/rte_dev.h
> +++ b/lib/librte_eal/common/include/rte_dev.h
> @@ -210,6 +210,7 @@ static void devinitfn_ ##d(void)\
> rte_eal_driver_register(&d);\
> }
>
> +
Probably a stray newline.
> #ifdef __cplusplus
> }
> #endif
> diff --git a/lib/librte_eal/common/include/rte_vdev.h b/lib/librte_eal/common/include/rte_vdev.h
> new file mode 100644
> index 0000000..523bd92
> --- /dev/null
> +++ b/lib/librte_eal/common/include/rte_vdev.h
> @@ -0,0 +1,83 @@
> +/*-
> + * BSD LICENSE
> + *
> + * Copyright(c) 2016 RehiveTech. All rights reserved.
> + *
> + * Redistribution and use in source and binary forms, with or without
> + * modification, are permitted provided that the following conditions
> + * are met:
> + *
> + * * Redistributions of source code must retain the above copyright
> + * notice, this list of conditions and the following disclaimer.
> + * * Redistributions in binary form must reproduce the above copyright
> + * notice, this list of conditions and the following disclaimer in
> + * the documentation and/or other materials provided with the
> + * distribution.
> + * * Neither the name of RehiveTech nor the names of its
> + * contributors may be used to endorse or promote products derived
> + * from this software without specific prior written permission.
> + *
> + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
> + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
> + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
> + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
> + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
> + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
> + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
> + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
> + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> + */
> +
> +#ifndef RTE_VDEV_H
> +#define RTE_VDEV_H
> +
> +#ifdef __cplusplus
> +extern "C" {
> +#endif
> +
> +#include <sys/queue.h>
> +#include <rte_dev.h>
> +
> +/** Double linked list of virtual device drivers. */
> +TAILQ_HEAD(vdev_driver_list, rte_vdev_driver);
> +
> +/**
> + * A virtual device driver abstraction.
> + */
> +struct rte_vdev_driver {
> + TAILQ_ENTRY(rte_vdev_driver) next; /**< Next in list. */
> + struct rte_driver driver; /**< Inherited general driver. */
> +};
> +
> +/**
> + * Register a virtual device driver.
> + *
> + * @param driver
> + * A pointer to a rte_vdev_driver structure describing the driver
> + * to be registered.
> + */
> +void rte_eal_vdrv_register(struct rte_vdev_driver *driver);
> +
> +/**
> + * Unregister a virtual device driver.
> + *
> + * @param driver
> + * A pointer to a rte_vdev_driver structure describing the driver
> + * to be unregistered.
> + */
> +void rte_eal_vdrv_unregister(struct rte_vdev_driver *driver);
> +
> +#define RTE_EAL_VDRV_REGISTER(d)\
In the recent commits, I noticed that macros have taken the (name, driver) format.
PMD_REGISTER_DRIVER() (now redundant), DRIVER_REGISTER_PCI_TABLE() ... etc
It might be better to stick to the same format.
> +RTE_INIT(vdrvinitfn_ ##d);\
> +static void vdrvinitfn_ ##d(void)\
> +{\
> + rte_eal_vdrv_register(&d);\
> +}
> +
> +#ifdef __cplusplus
> +}
> +#endif
> +
> +#endif
> diff --git a/lib/librte_eal/linuxapp/eal/Makefile b/lib/librte_eal/linuxapp/eal/Makefile
> index 30b30f3..9553e97 100644
> --- a/lib/librte_eal/linuxapp/eal/Makefile
> +++ b/lib/librte_eal/linuxapp/eal/Makefile
> @@ -85,6 +85,7 @@ SRCS-$(CONFIG_RTE_EXEC_ENV_LINUXAPP) += eal_common_timer.c
> SRCS-$(CONFIG_RTE_EXEC_ENV_LINUXAPP) += eal_common_memzone.c
> SRCS-$(CONFIG_RTE_EXEC_ENV_LINUXAPP) += eal_common_log.c
> SRCS-$(CONFIG_RTE_EXEC_ENV_LINUXAPP) += eal_common_launch.c
> +SRCS-$(CONFIG_RTE_EXEC_ENV_LINUXAPP) += eal_common_vdev.c
> SRCS-$(CONFIG_RTE_EXEC_ENV_LINUXAPP) += eal_common_pci.c
> SRCS-$(CONFIG_RTE_EXEC_ENV_LINUXAPP) += eal_common_pci_uio.c
> SRCS-$(CONFIG_RTE_EXEC_ENV_LINUXAPP) += eal_common_memory.c
>
next prev parent reply other threads:[~2016-07-11 13:29 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-07-08 19:09 [dpdk-dev] [PATCH v1 00/15] rte_driver/device infrastructure Jan Viktorin
2016-07-08 19:09 ` [dpdk-dev] [PATCH v1 01/15] eal: extract vdev infra Jan Viktorin
2016-07-11 13:29 ` Shreyansh jain [this message]
2016-07-11 14:08 ` Jan Viktorin
2016-07-08 19:09 ` [dpdk-dev] [PATCH v1 02/15] eal: no need to test for PMD_VDEV anymore Jan Viktorin
2016-07-08 19:09 ` [dpdk-dev] [PATCH v1 03/15] eal: do not call init for PMD_PDEV drivers Jan Viktorin
2016-07-08 19:09 ` [dpdk-dev] [PATCH v1 04/15] drivers: convert PMD_VDEV drivers to use rte_vdev_driver Jan Viktorin
2016-07-08 19:09 ` [dpdk-dev] [PATCH v1 05/15] eal: move init/uninit to rte_vdev_driver Jan Viktorin
2016-07-08 19:09 ` [dpdk-dev] [PATCH v1 06/15] eal: remove PMD_REGISTER_DRIVER Jan Viktorin
2016-07-08 19:09 ` [dpdk-dev] [PATCH v1 07/15] eal: get rid of pmd_type Jan Viktorin
2016-07-08 19:09 ` [dpdk-dev] [PATCH v1 08/15] eal: define macro container_of Jan Viktorin
2016-07-08 19:09 ` [dpdk-dev] [PATCH v1 09/15] eal: rte_pci.h includes rte_dev.h Jan Viktorin
2016-07-08 19:09 ` [dpdk-dev] [PATCH v1 10/15] eal: rename and move rte_pci_resource Jan Viktorin
2016-07-08 19:09 ` [dpdk-dev] [PATCH v1 11/15] eal/pci: inherit rte_driver by rte_pci_driver Jan Viktorin
2016-07-08 19:09 ` [dpdk-dev] [PATCH v1 12/15] eal: call rte_eal_driver_register Jan Viktorin
2016-07-08 19:09 ` [dpdk-dev] [PATCH v1 13/15] eal: introduce rte_device Jan Viktorin
2016-07-08 19:09 ` [dpdk-dev] [PATCH v1 14/15] eal/pci: inherit rte_device by rte_pci_device Jan Viktorin
2016-07-08 19:09 ` [dpdk-dev] [PATCH v1 15/15] eal/pci: insert rte_device on scan Jan Viktorin
2016-07-11 13:13 ` [dpdk-dev] [PATCH v1 00/15] rte_driver/device infrastructure Shreyansh jain
2016-07-15 13:19 ` Thomas Monjalon
2016-07-15 15:33 ` Jan Viktorin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=57839F4C.40507@nxp.com \
--to=shreyansh.jain@nxp.com \
--cc=david.marchand@6wind.com \
--cc=dev@dpdk.org \
--cc=thomas.monjalon@6wind.com \
--cc=viktorin@rehivetech.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).