From: Ferruh Yigit <ferruh.yigit@xilinx.com>
To: Junfeng Guo <junfeng.guo@intel.com>, <qi.z.zhang@intel.com>,
<jingjing.wu@intel.com>
Cc: <dev@dpdk.org>, <xiaoyun.li@intel.com>, <awogbemila@google.com>,
<bruce.richardson@intel.com>, Haiyue Wang <haiyue.wang@intel.com>
Subject: Re: [PATCH v2 03/10] net/gve: support device initialization
Date: Thu, 1 Sep 2022 18:21:51 +0100 [thread overview]
Message-ID: <6949e1e3-df7c-1e64-dfb5-b53779fb8fa0@xilinx.com> (raw)
In-Reply-To: <20220829084127.934183-4-junfeng.guo@intel.com>
On 8/29/2022 9:41 AM, Junfeng Guo wrote:
>
> Support device init and the fowllowing devops:
> - dev_configure
> - dev_start
> - dev_stop
> - dev_close
>
> Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
> Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
> Signed-off-by: Junfeng Guo <junfeng.guo@intel.com>
> ---
> drivers/net/gve/gve.h | 249 +++++++++++++++++++++++
> drivers/net/gve/gve_adminq.c | 1 +
> drivers/net/gve/gve_ethdev.c | 375 +++++++++++++++++++++++++++++++++++
> drivers/net/gve/meson.build | 13 ++
> drivers/net/gve/version.map | 3 +
> drivers/net/meson.build | 1 +
> 6 files changed, 642 insertions(+)
> create mode 100644 drivers/net/gve/gve.h
> create mode 100644 drivers/net/gve/gve_ethdev.c
> create mode 100644 drivers/net/gve/meson.build
> create mode 100644 drivers/net/gve/version.map
>
> diff --git a/drivers/net/gve/gve.h b/drivers/net/gve/gve.h
> new file mode 100644
> index 0000000000..704c88983c
> --- /dev/null
> +++ b/drivers/net/gve/gve.h
> @@ -0,0 +1,249 @@
> +/* SPDX-License-Identifier: BSD-3-Clause
> + * Copyright(C) 2022 Intel Corporation
> + */
> +
> +#ifndef _GVE_H_
> +#define _GVE_H_
> +
> +#include <ethdev_driver.h>
> +#include <ethdev_pci.h>
> +#include <rte_ether.h>
> +
> +#include "gve_desc.h"
> +
> +#ifndef GOOGLE_VENDOR_ID
> +#define GOOGLE_VENDOR_ID 0x1ae0
> +#endif
> +
> +#define GVE_DEV_ID 0x0042
> +
> +#define GVE_REG_BAR 0
> +#define GVE_DB_BAR 2
> +
> +/* 1 for management, 1 for rx, 1 for tx */
> +#define GVE_MIN_MSIX 3
> +
> +/* PTYPEs are always 10 bits. */
> +#define GVE_NUM_PTYPES 1024
> +
> +/* A list of pages registered with the device during setup and used by a queue
> + * as buffers
> + */
> +struct gve_queue_page_list {
> + uint32_t id; /* unique id */
> + uint32_t num_entries;
> + dma_addr_t *page_buses; /* the dma addrs of the pages */
> + const struct rte_memzone *mz;
> +};
> +
> +/* A TX desc ring entry */
> +union gve_tx_desc {
> + struct gve_tx_pkt_desc pkt; /* first desc for a packet */
> + struct gve_tx_seg_desc seg; /* subsequent descs for a packet */
> +};
> +
> +struct gve_tx_queue {
> + volatile union gve_tx_desc *tx_desc_ring;
> + const struct rte_memzone *mz;
> + uint64_t tx_ring_phys_addr;
> +
> + uint16_t nb_tx_desc;
> +
> + /* Only valid for DQO_QPL queue format */
> + struct gve_queue_page_list *qpl;
> +
> + uint16_t port_id;
> + uint16_t queue_id;
> +
> + uint16_t ntfy_id;
> + volatile rte_be32_t *ntfy_addr;
> +
> + struct gve_priv *hw;
> + const struct rte_memzone *qres_mz;
> + struct gve_queue_resources *qres;
> +
> + /* Only valid for DQO_RDA queue format */
> + struct gve_tx_queue *complq;
> +};
> +
> +struct gve_rx_queue {
> + volatile struct gve_rx_desc *rx_desc_ring;
> + volatile union gve_rx_data_slot *rx_data_ring;
> + const struct rte_memzone *mz;
> + const struct rte_memzone *data_mz;
> + uint64_t rx_ring_phys_addr;
> +
> + uint16_t nb_rx_desc;
> +
> + volatile rte_be32_t *ntfy_addr;
> +
> + /* only valid for GQI_QPL queue format */
> + struct gve_queue_page_list *qpl;
> +
> + struct gve_priv *hw;
> + const struct rte_memzone *qres_mz;
> + struct gve_queue_resources *qres;
> +
> + uint16_t port_id;
> + uint16_t queue_id;
> + uint16_t ntfy_id;
> + uint16_t rx_buf_len;
> +
> + /* Only valid for DQO_RDA queue format */
> + struct gve_rx_queue *bufq;
> +};
> +
> +struct gve_irq_db {
> + rte_be32_t id;
> +} ____cacheline_aligned;
> +
> +struct gve_ptype {
> + uint8_t l3_type; /* `gve_l3_type` in gve_adminq.h */
> + uint8_t l4_type; /* `gve_l4_type` in gve_adminq.h */
> +};
> +
> +struct gve_ptype_lut {
> + struct gve_ptype ptypes[GVE_NUM_PTYPES];
> +};
> +
> +enum gve_queue_format {
> + GVE_QUEUE_FORMAT_UNSPECIFIED = 0x0, /* default unspecified */
> + GVE_GQI_RDA_FORMAT = 0x1, /* GQI Raw Addressing */
> + GVE_GQI_QPL_FORMAT = 0x2, /* GQI Queue Page List */
> + GVE_DQO_RDA_FORMAT = 0x3, /* DQO Raw Addressing */
> +};
> +
Shouldn't these queue format information be part of 'base' file? Both
for licensing issues also to cover the case it is updated in the google
repo.
But if some dpdk related information is required, what do you think to
split this file as one for base folder, other for dpdk?
> +struct gve_priv {
> + struct gve_irq_db *irq_dbs; /* array of num_ntfy_blks */
> + const struct rte_memzone *irq_dbs_mz;
> + uint32_t mgmt_msix_idx;
> + rte_be32_t *cnt_array; /* array of num_event_counters */
> + const struct rte_memzone *cnt_array_mz;
> +
> + uint16_t num_event_counters;
> + uint16_t tx_desc_cnt; /* txq size */
> + uint16_t rx_desc_cnt; /* rxq size */
> + uint16_t tx_pages_per_qpl; /* tx buffer length */
> + uint16_t rx_data_slot_cnt; /* rx buffer length */
> +
> + /* Only valid for DQO_RDA queue format */
> + uint16_t tx_compq_size; /* tx completion queue size */
> + uint16_t rx_bufq_size; /* rx buff queue size */
> +
> + uint64_t max_registered_pages;
> + uint64_t num_registered_pages; /* num pages registered with NIC */
> + uint16_t default_num_queues; /* default num queues to set up */
> + enum gve_queue_format queue_format; /* see enum gve_queue_format */
> + uint8_t enable_lsc;
> +
> + uint16_t max_nb_txq;
> + uint16_t max_nb_rxq;
> + uint32_t num_ntfy_blks; /* spilt between TX and RX so must be even */
> +
> + struct gve_registers __iomem *reg_bar0; /* see gve_register.h */
> + rte_be32_t __iomem *db_bar2; /* "array" of doorbells */
> + struct rte_pci_device *pci_dev;
> +
> + /* Admin queue - see gve_adminq.h*/
> + union gve_adminq_command *adminq;
> + struct gve_dma_mem adminq_dma_mem;
> + uint32_t adminq_mask; /* masks prod_cnt to adminq size */
> + uint32_t adminq_prod_cnt; /* free-running count of AQ cmds executed */
> + uint32_t adminq_cmd_fail; /* free-running count of AQ cmds failed */
> + uint32_t adminq_timeouts; /* free-running count of AQ cmds timeouts */
> + /* free-running count of per AQ cmd executed */
> + uint32_t adminq_describe_device_cnt;
> + uint32_t adminq_cfg_device_resources_cnt;
> + uint32_t adminq_register_page_list_cnt;
> + uint32_t adminq_unregister_page_list_cnt;
> + uint32_t adminq_create_tx_queue_cnt;
> + uint32_t adminq_create_rx_queue_cnt;
> + uint32_t adminq_destroy_tx_queue_cnt;
> + uint32_t adminq_destroy_rx_queue_cnt;
> + uint32_t adminq_dcfg_device_resources_cnt;
> + uint32_t adminq_set_driver_parameter_cnt;
> + uint32_t adminq_report_stats_cnt;
> + uint32_t adminq_report_link_speed_cnt;
> + uint32_t adminq_get_ptype_map_cnt;
> +
> + volatile uint32_t state_flags;
> +
> + /* Gvnic device link speed from hypervisor. */
> + uint64_t link_speed;
> +
> + uint16_t max_mtu;
> + struct rte_ether_addr dev_addr; /* mac address */
> +
> + struct gve_queue_page_list *qpl;
> +
> + struct gve_tx_queue **txqs;
> + struct gve_rx_queue **rxqs;
> +};
> +
The device private data is provided fully here, as well as
'gve_rx_queue' and 'gve_tx_queue' structs etc, although most of the
files not used at this stage and not clear why needed.
Instead of adding full structs, can you please add here bare minimum
structs, whatever used at this point, and as they are used in .c file,
keep adding them in structs too?
This clarifies what is used/added for specific features, also lets us
easily figure out unused fields / clutter in the header files.
> +enum gve_state_flags_bit {
> + GVE_PRIV_FLAGS_ADMIN_QUEUE_OK = 1,
> + GVE_PRIV_FLAGS_DEVICE_RESOURCES_OK = 2,
> + GVE_PRIV_FLAGS_DEVICE_RINGS_OK = 3,
> + GVE_PRIV_FLAGS_NAPI_ENABLED = 4,
> +};
> +
> +static inline bool gve_is_gqi(struct gve_priv *priv)
> +{
> + return priv->queue_format == GVE_GQI_RDA_FORMAT ||
> + priv->queue_format == GVE_GQI_QPL_FORMAT;
> +}
> +
> +static inline bool gve_get_admin_queue_ok(struct gve_priv *priv)
> +{
> + return !!rte_bit_relaxed_get32(GVE_PRIV_FLAGS_ADMIN_QUEUE_OK,
> + &priv->state_flags);
> +}
> +
> +static inline void gve_set_admin_queue_ok(struct gve_priv *priv)
> +{
> + rte_bit_relaxed_set32(GVE_PRIV_FLAGS_ADMIN_QUEUE_OK,
> + &priv->state_flags);
> +}
> +
> +static inline void gve_clear_admin_queue_ok(struct gve_priv *priv)
> +{
> + rte_bit_relaxed_clear32(GVE_PRIV_FLAGS_ADMIN_QUEUE_OK,
> + &priv->state_flags);
> +}
> +
> +static inline bool gve_get_device_resources_ok(struct gve_priv *priv)
> +{
> + return !!rte_bit_relaxed_get32(GVE_PRIV_FLAGS_DEVICE_RESOURCES_OK,
> + &priv->state_flags);
> +}
> +
> +static inline void gve_set_device_resources_ok(struct gve_priv *priv)
> +{
> + rte_bit_relaxed_set32(GVE_PRIV_FLAGS_DEVICE_RESOURCES_OK,
> + &priv->state_flags);
> +}
> +
> +static inline void gve_clear_device_resources_ok(struct gve_priv *priv)
> +{
> + rte_bit_relaxed_clear32(GVE_PRIV_FLAGS_DEVICE_RESOURCES_OK,
> + &priv->state_flags);
> +}
> +
> +static inline bool gve_get_device_rings_ok(struct gve_priv *priv)
> +{
> + return !!rte_bit_relaxed_get32(GVE_PRIV_FLAGS_DEVICE_RINGS_OK,
> + &priv->state_flags);
> +}
> +
> +static inline void gve_set_device_rings_ok(struct gve_priv *priv)
> +{
> + rte_bit_relaxed_set32(GVE_PRIV_FLAGS_DEVICE_RINGS_OK,
> + &priv->state_flags);
> +}
> +
> +static inline void gve_clear_device_rings_ok(struct gve_priv *priv)
> +{
> + rte_bit_relaxed_clear32(GVE_PRIV_FLAGS_DEVICE_RINGS_OK,
> + &priv->state_flags);
> +}
If this is dpdk file, not base file, please follow dpdk coding
convention, like return type should be in separate line.
> +#endif /* _GVE_H_ */
> diff --git a/drivers/net/gve/gve_adminq.c b/drivers/net/gve/gve_adminq.c
> index 8a724f12c6..438ca2070e 100644
> --- a/drivers/net/gve/gve_adminq.c
> +++ b/drivers/net/gve/gve_adminq.c
> @@ -5,6 +5,7 @@
> * Copyright(C) 2022 Intel Corporation
> */
>
> +#include "gve.h"
> #include "gve_adminq.h"
> #include "gve_register.h"
>
> diff --git a/drivers/net/gve/gve_ethdev.c b/drivers/net/gve/gve_ethdev.c
> new file mode 100644
> index 0000000000..f10f273f7d
> --- /dev/null
> +++ b/drivers/net/gve/gve_ethdev.c
> @@ -0,0 +1,375 @@
> +/* SPDX-License-Identifier: BSD-3-Clause
> + * Copyright(C) 2022 Intel Corporation
> + */
> +#include <linux/pci_regs.h>
> +
> +#include "gve.h"
> +#include "gve_adminq.h"
> +#include "gve_register.h"
> +
> +#define GVE_VERSION "1.3.0"
> +#define GVE_VERSION_PREFIX "GVE-"
> +
Again, shouldn't these come from base file (google repo)?
Perhaps can be good to discuss what is the base file update
strategy/plan for future?
It can be easier if you can drop some external files with minimum change
in dpdk files, that can be done by grouping external content in spefic
files.
Qi has lots of experince on this and I believe he can privide useful
insight.
> +const char gve_version_str[] = GVE_VERSION;
> +static const char gve_version_prefix[] = GVE_VERSION_PREFIX;
> +
> +static void
> +gve_write_version(uint8_t *driver_version_register)
> +{
> + const char *c = gve_version_prefix;
> +
> + while (*c) {
> + writeb(*c, driver_version_register);
> + c++;
> + }
> +
> + c = gve_version_str;
> + while (*c) {
> + writeb(*c, driver_version_register);
> + c++;
> + }
> + writeb('\n', driver_version_register);
> +}
> +
> +static int
> +gve_dev_configure(__rte_unused struct rte_eth_dev *dev)
> +{
> + return 0;
> +}
> +
> +static int
> +gve_dev_start(struct rte_eth_dev *dev)
> +{
> + dev->data->dev_started = 1;
> +
> + return 0;
> +}
> +
> +static int
> +gve_dev_stop(struct rte_eth_dev *dev)
> +{
> + dev->data->dev_link.link_status = RTE_ETH_LINK_DOWN;
> + dev->data->dev_started = 0;
> +
> + return 0;
> +}
> +
> +static int
> +gve_dev_close(struct rte_eth_dev *dev)
> +{
> + int err = 0;
> +
> + if (dev->data->dev_started) {
> + err = gve_dev_stop(dev);
> + if (err != 0)
> + PMD_DRV_LOG(ERR, "Failed to stop dev.");
> + }
> +
Just a reminder that in 'close' driver should free all the resources, if
there is previously allocated memomory, it should be freed now.
next prev parent reply other threads:[~2022-09-01 17:21 UTC|newest]
Thread overview: 192+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-07-29 19:30 [PATCH 00/10] introduce GVE PMD Xiaoyun Li
2022-07-29 19:30 ` [PATCH 01/10] net/gve: introduce GVE PMD base code Xiaoyun Li
2022-07-29 22:42 ` Stephen Hemminger
2022-07-29 22:45 ` Stephen Hemminger
2022-08-23 8:44 ` Guo, Junfeng
2022-08-29 8:41 ` [PATCH v2 00/10] introduce GVE PMD Junfeng Guo
2022-08-29 8:41 ` [PATCH v2 01/10] net/gve: introduce GVE PMD base code Junfeng Guo
2022-09-01 17:19 ` Ferruh Yigit
2022-09-01 18:23 ` Stephen Hemminger
2022-09-01 20:49 ` Thomas Monjalon
2022-09-06 9:31 ` Guo, Junfeng
2022-09-14 10:38 ` Thomas Monjalon
2022-08-29 8:41 ` [PATCH v2 02/10] net/gve: add logs and OS specific implementation Junfeng Guo
2022-09-01 17:20 ` Ferruh Yigit
2022-09-07 6:58 ` Guo, Junfeng
2022-09-07 11:16 ` Ferruh Yigit
2022-09-08 8:09 ` Guo, Junfeng
2022-08-29 8:41 ` [PATCH v2 03/10] net/gve: support device initialization Junfeng Guo
2022-09-01 17:21 ` Ferruh Yigit [this message]
2022-09-23 9:38 ` Guo, Junfeng
2022-09-01 17:22 ` Ferruh Yigit
2022-08-29 8:41 ` [PATCH v2 04/10] net/gve: add link update support Junfeng Guo
2022-09-01 17:23 ` Ferruh Yigit
2022-09-23 9:38 ` Guo, Junfeng
2022-08-29 8:41 ` [PATCH v2 05/10] net/gve: add MTU set support Junfeng Guo
2022-08-29 8:41 ` [PATCH v2 06/10] net/gve: add queue operations Junfeng Guo
2022-08-29 8:41 ` [PATCH v2 07/10] net/gve: add Rx/Tx support Junfeng Guo
2022-08-29 8:41 ` [PATCH v2 08/10] net/gve: add support to get dev info and configure dev Junfeng Guo
2022-09-01 17:23 ` Ferruh Yigit
2022-09-23 9:38 ` Guo, Junfeng
2022-08-29 8:41 ` [PATCH v2 09/10] net/gve: add stats support Junfeng Guo
2022-09-01 17:24 ` Ferruh Yigit
2022-09-23 9:38 ` Guo, Junfeng
2022-08-29 8:41 ` [PATCH v2 10/10] doc: update documentation Junfeng Guo
2022-09-01 17:20 ` Ferruh Yigit
2022-09-23 9:38 ` [PATCH v3 0/9] introduce GVE PMD Junfeng Guo
2022-09-23 9:38 ` [PATCH v3 1/9] net/gve: introduce GVE PMD base code Junfeng Guo
2022-09-23 18:57 ` Stephen Hemminger
2022-09-27 7:27 ` Guo, Junfeng
2022-09-23 18:58 ` Stephen Hemminger
2022-09-27 7:27 ` Guo, Junfeng
2022-09-27 7:32 ` [PATCH v4 0/9] introduce GVE PMD Junfeng Guo
2022-09-27 7:32 ` [PATCH v4 1/9] net/gve/base: introduce GVE PMD base code Junfeng Guo
2022-10-06 14:19 ` Ferruh Yigit
2022-10-09 9:14 ` Guo, Junfeng
2022-10-10 10:17 ` [PATCH v5 0/8] introduce GVE PMD Junfeng Guo
2022-10-10 10:17 ` [PATCH v5 1/8] net/gve/base: introduce GVE PMD base code Junfeng Guo
2022-10-19 13:45 ` Ferruh Yigit
2022-10-19 15:13 ` Hemant Agrawal
2022-10-19 15:18 ` Ferruh Yigit
2022-10-20 3:33 ` Hemant Agrawal
2022-10-19 15:48 ` Li, Xiaoyun
2022-10-19 20:52 ` Ferruh Yigit
2022-10-20 8:50 ` Li, Xiaoyun
2022-10-20 10:36 ` [PATCH v6 0/8] introduce GVE PMD Junfeng Guo
2022-10-20 10:36 ` [PATCH v6 1/8] net/gve/base: introduce GVE PMD base code Junfeng Guo
2022-10-20 14:39 ` Ferruh Yigit
2022-10-24 2:10 ` Guo, Junfeng
2022-10-20 14:40 ` Ferruh Yigit
2022-10-24 2:10 ` Guo, Junfeng
2022-10-20 10:36 ` [PATCH v6 2/8] net/gve/base: add OS specific implementation Junfeng Guo
2022-10-20 10:36 ` [PATCH v6 3/8] net/gve: add support for device initialization Junfeng Guo
2022-10-20 14:42 ` Ferruh Yigit
2022-10-24 2:10 ` Guo, Junfeng
2022-10-20 10:36 ` [PATCH v6 4/8] net/gve: add support for link update Junfeng Guo
2022-10-20 10:36 ` [PATCH v6 5/8] net/gve: add support for MTU setting Junfeng Guo
2022-10-20 14:45 ` Ferruh Yigit
2022-10-24 2:10 ` Guo, Junfeng
2022-10-20 10:36 ` [PATCH v6 6/8] net/gve: add support for dev info get and dev configure Junfeng Guo
2022-10-20 14:45 ` Ferruh Yigit
2022-10-24 2:10 ` Guo, Junfeng
2022-10-20 10:36 ` [PATCH v6 7/8] net/gve: add support for queue operations Junfeng Guo
2022-10-20 10:36 ` [PATCH v6 8/8] net/gve: add support for Rx/Tx Junfeng Guo
2022-10-20 14:47 ` Ferruh Yigit
2022-10-24 2:10 ` Guo, Junfeng
2022-10-21 9:19 ` [PATCH v7 0/8] introduce GVE PMD Junfeng Guo
2022-10-21 9:19 ` [PATCH v7 1/8] net/gve/base: introduce base code Junfeng Guo
2022-10-21 9:49 ` Ferruh Yigit
2022-10-24 5:04 ` Guo, Junfeng
2022-10-24 10:47 ` Ferruh Yigit
2022-10-24 13:23 ` Guo, Junfeng
2022-10-24 10:50 ` Ferruh Yigit
2022-10-24 13:26 ` Guo, Junfeng
2022-10-25 9:07 ` [PATCH v8 0/8] introduce GVE PMD Junfeng Guo
2022-10-25 9:07 ` [PATCH v8 1/8] net/gve/base: introduce base code Junfeng Guo
2022-10-25 9:07 ` [PATCH v8 2/8] net/gve/base: add OS specific implementation Junfeng Guo
2022-10-25 9:07 ` [PATCH v8 3/8] net/gve: add support for device initialization Junfeng Guo
2022-10-25 9:07 ` [PATCH v8 4/8] net/gve: add support for link update Junfeng Guo
2022-10-25 9:07 ` [PATCH v8 5/8] net/gve: add support for MTU setting Junfeng Guo
2022-10-25 15:55 ` Stephen Hemminger
2022-10-26 2:15 ` Guo, Junfeng
2022-10-25 9:07 ` [PATCH v8 6/8] net/gve: add support for dev info get and dev configure Junfeng Guo
2022-10-25 9:07 ` [PATCH v8 7/8] net/gve: add support for queue operations Junfeng Guo
2022-10-25 9:07 ` [PATCH v8 8/8] net/gve: add support for Rx/Tx Junfeng Guo
2022-10-25 12:33 ` [PATCH v8 0/8] introduce GVE PMD Ferruh Yigit
2022-10-26 2:05 ` Guo, Junfeng
2022-10-21 9:19 ` [PATCH v7 2/8] net/gve/base: add OS specific implementation Junfeng Guo
2022-10-21 9:19 ` [PATCH v7 3/8] net/gve: add support for device initialization Junfeng Guo
2022-10-21 9:49 ` Ferruh Yigit
2022-10-24 5:04 ` Guo, Junfeng
2022-10-24 10:47 ` Ferruh Yigit
2022-10-24 13:22 ` Guo, Junfeng
2022-10-21 9:19 ` [PATCH v7 4/8] net/gve: add support for link update Junfeng Guo
2022-10-21 9:19 ` [PATCH v7 5/8] net/gve: add support for MTU setting Junfeng Guo
2022-10-21 9:50 ` Ferruh Yigit
2022-10-24 5:04 ` Guo, Junfeng
2022-10-24 10:47 ` Ferruh Yigit
2022-10-24 13:23 ` Guo, Junfeng
2022-10-21 9:19 ` [PATCH v7 6/8] net/gve: add support for dev info get and dev configure Junfeng Guo
2022-10-21 9:51 ` Ferruh Yigit
2022-10-24 5:04 ` Guo, Junfeng
2022-10-24 10:48 ` Ferruh Yigit
2022-10-24 13:23 ` Guo, Junfeng
2022-10-21 9:19 ` [PATCH v7 7/8] net/gve: add support for queue operations Junfeng Guo
2022-10-21 9:19 ` [PATCH v7 8/8] net/gve: add support for Rx/Tx Junfeng Guo
2022-10-21 9:52 ` Ferruh Yigit
2022-10-24 5:04 ` Guo, Junfeng
2022-10-24 10:50 ` Ferruh Yigit
2022-10-24 13:25 ` Guo, Junfeng
2022-10-25 9:07 ` Guo, Junfeng
2022-10-21 13:12 ` [PATCH v7 0/8] introduce GVE PMD Ferruh Yigit
2022-10-24 10:50 ` Ferruh Yigit
2022-10-24 13:25 ` Guo, Junfeng
2022-10-10 10:17 ` [PATCH v5 2/8] net/gve/base: add OS specific implementation Junfeng Guo
2022-10-10 10:17 ` [PATCH v5 3/8] net/gve: add support for device initialization Junfeng Guo
2022-10-19 13:46 ` Ferruh Yigit
2022-10-19 15:59 ` Li, Xiaoyun
2022-10-19 21:00 ` Ferruh Yigit
2022-10-20 9:29 ` Guo, Junfeng
2022-10-20 11:15 ` Ferruh Yigit
2022-10-21 4:46 ` Guo, Junfeng
2022-10-19 13:47 ` Ferruh Yigit
2022-10-19 14:02 ` Xia, Chenbo
2022-10-19 14:24 ` Zhang, Helin
2022-10-19 21:16 ` Ferruh Yigit
2022-10-19 16:20 ` Li, Xiaoyun
2022-10-10 10:17 ` [PATCH v5 4/8] net/gve: add support for link update Junfeng Guo
2022-10-10 10:17 ` [PATCH v5 5/8] net/gve: add support for MTU setting Junfeng Guo
2022-10-19 13:47 ` Ferruh Yigit
2022-10-20 10:14 ` Guo, Junfeng
2022-10-10 10:17 ` [PATCH v5 6/8] net/gve: add support for dev info get and dev configure Junfeng Guo
2022-10-19 13:49 ` Ferruh Yigit
2022-10-20 9:29 ` Guo, Junfeng
2022-10-20 11:19 ` Ferruh Yigit
2022-10-21 5:22 ` Guo, Junfeng
2022-10-10 10:17 ` [PATCH v5 7/8] net/gve: add support for queue operations Junfeng Guo
2022-10-10 10:17 ` [PATCH v5 8/8] net/gve: add support for Rx/Tx Junfeng Guo
2022-10-19 13:47 ` Ferruh Yigit
2022-10-20 9:34 ` Guo, Junfeng
2022-09-27 7:32 ` [PATCH v4 2/9] net/gve/base: add logs and OS specific implementation Junfeng Guo
2022-10-06 14:20 ` Ferruh Yigit
2022-10-09 9:14 ` Guo, Junfeng
2022-09-27 7:32 ` [PATCH v4 3/9] net/gve: add support for device initialization Junfeng Guo
2022-10-06 14:22 ` Ferruh Yigit
2022-10-09 9:14 ` Guo, Junfeng
2022-09-27 7:32 ` [PATCH v4 4/9] net/gve: add support for link update Junfeng Guo
2022-10-06 14:23 ` Ferruh Yigit
2022-10-09 9:14 ` Guo, Junfeng
2022-09-27 7:32 ` [PATCH v4 5/9] net/gve: add support for MTU setting Junfeng Guo
2022-09-27 7:32 ` [PATCH v4 6/9] net/gve: add support for queue operations Junfeng Guo
2022-09-27 7:32 ` [PATCH v4 7/9] net/gve: add support for Rx/Tx Junfeng Guo
2022-10-06 14:24 ` Ferruh Yigit
2022-10-09 9:14 ` Guo, Junfeng
2022-10-10 9:39 ` Li, Xiaoyun
2022-10-10 10:18 ` Guo, Junfeng
2022-09-27 7:32 ` [PATCH v4 8/9] net/gve: add support for dev info get and dev configure Junfeng Guo
2022-10-06 14:25 ` Ferruh Yigit
2022-10-09 9:14 ` Guo, Junfeng
2022-09-27 7:32 ` [PATCH v4 9/9] net/gve: add support for stats Junfeng Guo
2022-10-06 14:25 ` Ferruh Yigit
2022-10-09 9:15 ` Guo, Junfeng
2022-09-23 9:38 ` [PATCH v3 2/9] net/gve: add logs and OS specific implementation Junfeng Guo
2022-09-23 19:01 ` Stephen Hemminger
2022-09-27 7:27 ` Guo, Junfeng
2022-09-23 9:38 ` [PATCH v3 3/9] net/gve: support device initialization Junfeng Guo
2022-09-23 9:38 ` [PATCH v3 4/9] net/gve: add link update support Junfeng Guo
2022-09-23 9:38 ` [PATCH v3 5/9] net/gve: add MTU set support Junfeng Guo
2022-09-23 9:38 ` [PATCH v3 6/9] net/gve: add queue operations Junfeng Guo
2022-09-23 9:38 ` [PATCH v3 7/9] net/gve: add Rx/Tx support Junfeng Guo
2022-09-23 9:38 ` [PATCH v3 8/9] net/gve: add support to get dev info and configure dev Junfeng Guo
2022-09-23 9:38 ` [PATCH v3 9/9] net/gve: add stats support Junfeng Guo
2022-09-01 17:19 ` [PATCH v2 00/10] introduce GVE PMD Ferruh Yigit
2022-09-07 2:09 ` Guo, Junfeng
2022-07-29 19:30 ` [PATCH 02/10] net/gve: add logs and OS specific implementation Xiaoyun Li
2022-07-29 19:30 ` [PATCH 03/10] net/gve: support device initialization Xiaoyun Li
2022-07-29 19:30 ` [PATCH 04/10] net/gve: add link update support Xiaoyun Li
2022-07-29 19:30 ` [PATCH 05/10] net/gve: add MTU set support Xiaoyun Li
2022-07-29 19:30 ` [PATCH 06/10] net/gve: add queue operations Xiaoyun Li
2022-07-29 19:30 ` [PATCH 07/10] net/gve: add Rx/Tx support Xiaoyun Li
2022-07-29 19:30 ` [PATCH 08/10] net/gve: add support to get dev info and configure dev Xiaoyun Li
2022-07-29 19:30 ` [PATCH 09/10] net/gve: add stats support Xiaoyun Li
2022-07-29 19:30 ` [PATCH 10/10] doc: update documentation Xiaoyun Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=6949e1e3-df7c-1e64-dfb5-b53779fb8fa0@xilinx.com \
--to=ferruh.yigit@xilinx.com \
--cc=awogbemila@google.com \
--cc=bruce.richardson@intel.com \
--cc=dev@dpdk.org \
--cc=haiyue.wang@intel.com \
--cc=jingjing.wu@intel.com \
--cc=junfeng.guo@intel.com \
--cc=qi.z.zhang@intel.com \
--cc=xiaoyun.li@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).