From: Ferruh Yigit <ferruh.yigit@intel.com>
To: "Zhang, Qi Z" <qi.z.zhang@intel.com>,
"thomas@monjalon.net" <thomas@monjalon.net>
Cc: "Ananyev, Konstantin" <konstantin.ananyev@intel.com>,
"dev@dpdk.org" <dev@dpdk.org>,
"Xing, Beilei" <beilei.xing@intel.com>,
"Wu, Jingjing" <jingjing.wu@intel.com>,
"Lu, Wenzhuo" <wenzhuo.lu@intel.com>
Subject: Re: [dpdk-dev] [PATCH v7 4/5] app/testpmd: enable queue ring size configure
Date: Tue, 24 Apr 2018 12:05:37 +0100 [thread overview]
Message-ID: <7d8debb8-7b90-7abf-cb14-acc217b5b749@intel.com> (raw)
In-Reply-To: <039ED4275CED7440929022BC67E70611531A6206@SHSMSX103.ccr.corp.intel.com>
On 4/24/2018 4:16 AM, Zhang, Qi Z wrote:
>
>
>> -----Original Message-----
>> From: Yigit, Ferruh
>> Sent: Tuesday, April 24, 2018 1:45 AM
>> To: Zhang, Qi Z <qi.z.zhang@intel.com>; thomas@monjalon.net
>> Cc: Ananyev, Konstantin <konstantin.ananyev@intel.com>; dev@dpdk.org;
>> Xing, Beilei <beilei.xing@intel.com>; Wu, Jingjing <jingjing.wu@intel.com>;
>> Lu, Wenzhuo <wenzhuo.lu@intel.com>
>> Subject: Re: [PATCH v7 4/5] app/testpmd: enable queue ring size configure
>>
>> On 4/22/2018 12:58 PM, Qi Zhang wrote:
>>> Add command to change specific queue's ring size configure, the new
>>> value will only take effect after command that restart the device(port
>>> stop <port_id>/port start <port_id>) or command that setup the
>>> queue(port <port_id> rxq <qid> setup) at runtime.
>>>
>>> Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
>>> ---
>>> app/test-pmd/cmdline.c | 102
>> ++++++++++++++++++++++++++++
>>> doc/guides/testpmd_app_ug/testpmd_funcs.rst | 9 +++
>>> 2 files changed, 111 insertions(+)
>>>
>>> diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c index
>>> b50e11e60..22e4d4585 100644
>>> --- a/app/test-pmd/cmdline.c
>>> +++ b/app/test-pmd/cmdline.c
>>> @@ -846,6 +846,11 @@ static void cmd_help_long_parsed(void
>> *parsed_result,
>>> "port config mtu X value\n"
>>> " Set the MTU of port X to a given value\n\n"
>>>
>>> + "port config (port_id) (rxq|txq) (queue_id) ring_size (value)\n"
>>> + " Set a rx/tx queue's ring size configuration, the new"
>>> + " value will take effect after command that (re-)start the port"
>>> + " or command that setup the specific queue\n\n"
>>
>> "port config all rxq|txq|rxd|txd <value>" is used to set number of queues
>> (rxq) or number of descriptors in queue (rxd).
>>
>> Problem is this is not flexible and your version is better.
>>
>> What do you think removing old rxd|txd part with this patch, to prevent
>> duplication?
>
> I'm not sure.
> Do we need some command to reset all queue's ring size to default value.
> Probably we need to support "all" syntax on new command before consider remove this.
My concern was having to multiple commands with different syntax for same
result, if both have different usecase that is OK.
>
> Also per queue config will be reset to original command line parameter by any command that call init_port_config, (for example: port config all rxq ...)
> while "port config all rxd ..." modify the command line value, so they are different
>
> Regards
> Qi
>
next prev parent reply other threads:[~2018-04-24 11:05 UTC|newest]
Thread overview: 95+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-02-12 4:53 [dpdk-dev] [PATCH 0/4] deferred queue setup Qi Zhang
2018-02-12 4:53 ` [dpdk-dev] [PATCH 1/4] ether: support " Qi Zhang
2018-02-12 13:55 ` Thomas Monjalon
2018-02-12 4:53 ` [dpdk-dev] [PATCH 2/4] app/testpmd: add parameters for " Qi Zhang
2018-02-12 4:53 ` [dpdk-dev] [PATCH 3/4] app/testpmd: add command for " Qi Zhang
2018-02-12 4:53 ` [dpdk-dev] [PATCH 4/4] net/i40e: enable deferred " Qi Zhang
2018-03-02 4:13 ` [dpdk-dev] [PATCH v2 0/4] " Qi Zhang
2018-03-02 4:13 ` [dpdk-dev] [PATCH v2 1/4] ether: support " Qi Zhang
2018-03-14 12:31 ` Ananyev, Konstantin
2018-03-15 3:13 ` Zhang, Qi Z
2018-03-15 13:16 ` Ananyev, Konstantin
2018-03-15 15:08 ` Zhang, Qi Z
2018-03-15 15:38 ` Ananyev, Konstantin
2018-03-16 0:42 ` Zhang, Qi Z
2018-03-02 4:13 ` [dpdk-dev] [PATCH v2 2/4] app/testpmd: add parameters for " Qi Zhang
2018-03-14 17:38 ` Ananyev, Konstantin
2018-03-15 3:58 ` Zhang, Qi Z
2018-03-15 13:42 ` Ananyev, Konstantin
2018-03-15 14:31 ` Zhang, Qi Z
2018-03-02 4:13 ` [dpdk-dev] [PATCH v2 3/4] app/testpmd: add command for " Qi Zhang
2018-03-14 17:36 ` Ananyev, Konstantin
2018-03-14 17:41 ` Ananyev, Konstantin
2018-03-15 3:59 ` Zhang, Qi Z
2018-03-02 4:13 ` [dpdk-dev] [PATCH v2 4/4] net/i40e: enable deferred " Qi Zhang
2018-03-14 12:35 ` Ananyev, Konstantin
2018-03-15 3:22 ` Zhang, Qi Z
2018-03-15 3:50 ` Zhang, Qi Z
2018-03-15 13:22 ` Ananyev, Konstantin
2018-03-15 14:30 ` Zhang, Qi Z
2018-03-15 15:22 ` Ananyev, Konstantin
2018-03-16 0:52 ` Zhang, Qi Z
2018-03-16 9:54 ` Ananyev, Konstantin
2018-03-16 11:00 ` Bruce Richardson
2018-03-16 13:18 ` Zhang, Qi Z
2018-03-16 14:15 ` Zhang, Qi Z
2018-03-16 18:47 ` Ananyev, Konstantin
2018-03-18 7:55 ` Zhang, Qi Z
2018-03-20 13:18 ` Ananyev, Konstantin
2018-03-21 1:53 ` Zhang, Qi Z
2018-03-21 7:28 ` [dpdk-dev] [PATCH v3 0/3] runtime " Qi Zhang
2018-03-21 7:28 ` [dpdk-dev] [PATCH v3 1/3] ether: support " Qi Zhang
2018-03-25 19:47 ` Ananyev, Konstantin
2018-03-21 7:28 ` [dpdk-dev] [PATCH v3 2/3] app/testpmd: add command for " Qi Zhang
2018-03-21 7:28 ` [dpdk-dev] [PATCH v3 3/3] net/i40e: enable runtime " Qi Zhang
2018-03-25 19:46 ` Ananyev, Konstantin
2018-03-26 8:49 ` Zhang, Qi Z
2018-03-26 8:59 ` [dpdk-dev] [PATCH v4 0/3] " Qi Zhang
2018-03-26 8:59 ` [dpdk-dev] [PATCH v4 1/3] ether: support " Qi Zhang
2018-03-26 8:59 ` [dpdk-dev] [PATCH v4 2/3] app/testpmd: add command for " Qi Zhang
2018-04-01 12:21 ` Ananyev, Konstantin
2018-03-26 8:59 ` [dpdk-dev] [PATCH v4 3/3] net/i40e: enable runtime " Qi Zhang
2018-04-01 12:18 ` Ananyev, Konstantin
2018-04-02 2:20 ` Zhang, Qi Z
2018-04-02 2:59 ` [dpdk-dev] [PATCH v5 0/3] " Qi Zhang
2018-04-02 2:59 ` [dpdk-dev] [PATCH v5 1/3] ether: support " Qi Zhang
2018-04-06 19:42 ` Rosen, Rami
2018-04-08 2:20 ` Zhang, Qi Z
2018-04-02 2:59 ` [dpdk-dev] [PATCH v5 2/3] app/testpmd: add command for " Qi Zhang
2018-04-07 15:49 ` Rosen, Rami
2018-04-08 2:22 ` Zhang, Qi Z
2018-04-02 2:59 ` [dpdk-dev] [PATCH v5 3/3] net/i40e: enable runtime " Qi Zhang
2018-04-02 23:36 ` [dpdk-dev] [PATCH v5 0/3] " Ananyev, Konstantin
2018-04-08 2:42 ` Qi Zhang
2018-04-08 2:42 ` [dpdk-dev] [PATCH v6 1/3] ether: support " Qi Zhang
2018-04-10 13:59 ` Thomas Monjalon
2018-04-20 11:14 ` Ferruh Yigit
2018-04-24 19:36 ` Thomas Monjalon
2018-04-25 5:33 ` Zhang, Qi Z
2018-04-25 7:54 ` Thomas Monjalon
2018-04-20 11:16 ` Ferruh Yigit
2018-04-08 2:42 ` [dpdk-dev] [PATCH v6 2/3] app/testpmd: add command for " Qi Zhang
2018-04-20 11:29 ` Ferruh Yigit
2018-04-22 11:57 ` Zhang, Qi Z
2018-04-08 2:42 ` [dpdk-dev] [PATCH v6 3/3] net/i40e: enable runtime " Qi Zhang
2018-04-20 11:17 ` Ferruh Yigit
2018-04-22 11:58 ` [dpdk-dev] [PATCH v7 0/5] " Qi Zhang
2018-04-22 11:58 ` [dpdk-dev] [PATCH v7 1/5] ethdev: support " Qi Zhang
2018-04-23 17:45 ` Ferruh Yigit
2018-04-22 11:58 ` [dpdk-dev] [PATCH v7 2/5] app/testpmd: add command for " Qi Zhang
2018-04-22 11:58 ` [dpdk-dev] [PATCH v7 3/5] app/testpmd: enable per queue configure Qi Zhang
2018-04-23 17:45 ` Ferruh Yigit
2018-04-22 11:58 ` [dpdk-dev] [PATCH v7 4/5] app/testpmd: enable queue ring size configure Qi Zhang
2018-04-23 17:45 ` Ferruh Yigit
2018-04-24 3:16 ` Zhang, Qi Z
2018-04-24 11:05 ` Ferruh Yigit [this message]
2018-04-22 11:58 ` [dpdk-dev] [PATCH v7 5/5] net/i40e: enable runtime queue setup Qi Zhang
2018-04-23 17:45 ` [dpdk-dev] [PATCH v7 0/5] " Ferruh Yigit
2018-04-24 12:44 ` [dpdk-dev] [PATCH v8 " Qi Zhang
2018-04-24 12:44 ` [dpdk-dev] [PATCH v8 1/5] ethdev: support " Qi Zhang
2018-04-24 14:01 ` Thomas Monjalon
2018-04-24 12:44 ` [dpdk-dev] [PATCH v8 2/5] app/testpmd: add command for " Qi Zhang
2018-04-24 12:44 ` [dpdk-dev] [PATCH v8 3/5] app/testpmd: enable per queue configure Qi Zhang
2018-04-24 12:44 ` [dpdk-dev] [PATCH v8 4/5] app/testpmd: enable queue ring size configure Qi Zhang
2018-04-24 12:44 ` [dpdk-dev] [PATCH v8 5/5] net/i40e: enable runtime queue setup Qi Zhang
2018-04-24 14:50 ` [dpdk-dev] [PATCH v8 0/5] " Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=7d8debb8-7b90-7abf-cb14-acc217b5b749@intel.com \
--to=ferruh.yigit@intel.com \
--cc=beilei.xing@intel.com \
--cc=dev@dpdk.org \
--cc=jingjing.wu@intel.com \
--cc=konstantin.ananyev@intel.com \
--cc=qi.z.zhang@intel.com \
--cc=thomas@monjalon.net \
--cc=wenzhuo.lu@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).