From: "Iremonger, Bernard" <bernard.iremonger@intel.com>
To: "Wu, Jingjing" <jingjing.wu@intel.com>,
"dev@dpdk.org" <dev@dpdk.org>,
"Shah, Rahul R" <rahul.r.shah@intel.com>,
"Lu, Wenzhuo" <wenzhuo.lu@intel.com>,
"Dumitrescu, Cristian" <cristian.dumitrescu@intel.com>
Subject: Re: [dpdk-dev] [PATCH v6 1/2] net/ixgbe: support multiqueue mode VMDq DCB with SRIOV
Date: Wed, 26 Oct 2016 16:09:32 +0000 [thread overview]
Message-ID: <8CEF83825BEC744B83065625E567D7C21A09E1FF@IRSMSX108.ger.corp.intel.com> (raw)
In-Reply-To: <8CEF83825BEC744B83065625E567D7C21A09E16F@IRSMSX108.ger.corp.intel.com>
Hi Jingling,
<snip>
> > > Subject: [PATCH v6 1/2] net/ixgbe: support multiqueue mode VMDq DCB
> > > with SRIOV
> > >
> > > The folowing changes have been made to allow Data Centre Bridge
> > > (DCB) configuration when SRIOV is enabled.
> > >
> > > Modify ixgbe_check_mq_mode function, when SRIOV is enabled, enable
> > > mq_mode ETH_MQ_RX_VMDQ_DCB and ETH_MQ_TX_VMDQ_DCB.
> > >
> > > Modify ixgbe_dcb_tx_hw_config function, replace the struct ixgbe_hw
> > > parameter with a struct rte_eth_dev parameter and handle SRIOV
> > > enabled.
> > >
> > > Modify ixgbe_dev_mq_rx_configure function, when SRIOV is enabled,
> > > enable mq_mode ETH_MQ_RX_VMDQ_DCB.
> > >
> > > Modify ixgbe_configure_dcb function, revise check on
> > > dev->data->nb_rx_queues.
> > >
> > > Signed-off-by: Rahul R Shah <rahul.r.shah@intel.com>
> > > Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
> > > Acked-by: Wenzhuo Lu <Wenzhuo.lu@intel.com>
> > > ---
> > > drivers/net/ixgbe/ixgbe_ethdev.c | 11 ++++++-----
> > > drivers/net/ixgbe/ixgbe_rxtx.c | 35 ++++++++++++++++++++++--------
> ---
> > --
> > > 2 files changed, 28 insertions(+), 18 deletions(-)
> > >
> > > diff --git a/drivers/net/ixgbe/ixgbe_ethdev.c
> > > b/drivers/net/ixgbe/ixgbe_ethdev.c
> > > index 4ca5747..4d5ce83 100644
> > > --- a/drivers/net/ixgbe/ixgbe_ethdev.c
> > > +++ b/drivers/net/ixgbe/ixgbe_ethdev.c
> > > @@ -1977,6 +1977,9 @@ ixgbe_check_mq_mode(struct rte_eth_dev
> > *dev)
> > > /* check multi-queue mode */
> > > switch (dev_conf->rxmode.mq_mode) {
> > > case ETH_MQ_RX_VMDQ_DCB:
> > > + PMD_INIT_LOG(INFO, "ETH_MQ_RX_VMDQ_DCB
> > mode supported in SRIOV");
> > > + dev->data->dev_conf.rxmode.mq_mode =
> > ETH_MQ_RX_VMDQ_DCB;
> > This line is duplicated, mq_mode is ETH_MQ_RX_VMDQ_DCB already.
>
> The mq_mode is assigned at this point in the other cases. This case is coded
> in line with the other cases.
>
> > and it's better to check if the nb_queue is valid.
>
The nb_rx_q and nb_tx_q are checked after the switch statements at line 2027 with the v6 patch applied.
Regards,
Bernard.
next prev parent reply other threads:[~2016-10-26 16:10 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-26 9:08 [dpdk-dev] [PATCH] " Bernard Iremonger
2016-09-21 11:07 ` Remy Horton
2016-10-14 13:29 ` [dpdk-dev] [PATCH v2] " Bernard Iremonger
2016-10-17 6:12 ` Lu, Wenzhuo
2016-10-17 16:27 ` Iremonger, Bernard
2016-10-18 1:07 ` Lu, Wenzhuo
2016-10-18 8:58 ` Iremonger, Bernard
2016-10-19 0:39 ` Lu, Wenzhuo
2016-10-19 10:16 ` Iremonger, Bernard
2016-10-17 16:07 ` [dpdk-dev] [PATCH v3 0/2] net/ixgbe: " Bernard Iremonger
2016-10-17 17:01 ` [dpdk-dev] [PATCH v4 " Bernard Iremonger
2016-10-19 10:21 ` [dpdk-dev] [PATCH v5 " Bernard Iremonger
2016-10-25 0:31 ` Lu, Wenzhuo
2016-10-25 16:51 ` [dpdk-dev] [PATCH v6 " Bernard Iremonger
2016-10-25 16:51 ` [dpdk-dev] [PATCH v6 1/2] net/ixgbe: support multiqueue mode " Bernard Iremonger
2016-10-26 14:38 ` Wu, Jingjing
2016-10-26 15:29 ` Iremonger, Bernard
2016-10-26 16:09 ` Iremonger, Bernard [this message]
2016-10-26 16:33 ` Wu, Jingjing
2016-10-25 16:51 ` [dpdk-dev] [PATCH v6 2/2] app/test_pmd: fix DCB configuration Bernard Iremonger
2016-10-26 14:30 ` Wu, Jingjing
2016-10-26 15:28 ` [dpdk-dev] [PATCH v7] net/ixgbe: support multiqueue mode VMDq DCB with SRIOV Bernard Iremonger
2016-10-26 15:41 ` Bruce Richardson
2016-10-28 14:40 ` [dpdk-dev] [PATCH v7] app/testpmd: fix DCB configuration Bernard Iremonger
2016-11-01 10:36 ` [dpdk-dev] [PATCH v8] " Bernard Iremonger
2016-11-03 17:35 ` [dpdk-dev] [PATCH v9] " Bernard Iremonger
2016-11-04 5:40 ` Wu, Jingjing
2016-11-07 15:56 ` Thomas Monjalon
2016-10-19 10:21 ` [dpdk-dev] [PATCH v5 1/2] net/ixgbe: support multiqueue mode VMDq DCB with SRIOV Bernard Iremonger
2016-10-20 1:24 ` Lu, Wenzhuo
2016-10-19 10:21 ` [dpdk-dev] [PATCH v5 2/2] app/test_pmd: fix DCB configuration Bernard Iremonger
2016-10-17 17:01 ` [dpdk-dev] [PATCH v4 1/2] net/ixgbe: support multiqueue mode VMDq DCB with SRIOV Bernard Iremonger
2016-10-17 17:01 ` [dpdk-dev] [PATCH v4 2/2] app/test_pmd: fix DCB configuration Bernard Iremonger
2016-10-17 16:07 ` [dpdk-dev] [PATCH v3 1/2] net/ixgbe: support multiqueue mode VMDq DCB with SRIOV Bernard Iremonger
2016-10-17 16:07 ` [dpdk-dev] [PATCH v3 2/2] app/test_pmd: fix DCB configuration Bernard Iremonger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8CEF83825BEC744B83065625E567D7C21A09E1FF@IRSMSX108.ger.corp.intel.com \
--to=bernard.iremonger@intel.com \
--cc=cristian.dumitrescu@intel.com \
--cc=dev@dpdk.org \
--cc=jingjing.wu@intel.com \
--cc=rahul.r.shah@intel.com \
--cc=wenzhuo.lu@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).