From: "Wang, Zhihong" <zhihong.wang@intel.com>
To: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Cc: "dev@dpdk.org" <dev@dpdk.org>,
"maxime.coquelin@redhat.com" <maxime.coquelin@redhat.com>,
"thomas.monjalon@6wind.com" <thomas.monjalon@6wind.com>
Subject: Re: [dpdk-dev] [PATCH v4 2/6] vhost: rewrite enqueue
Date: Wed, 7 Sep 2016 05:39:10 +0000 [thread overview]
Message-ID: <8F6C2BD409508844A0EFC19955BE09414E70C1A7@SHSMSX103.ccr.corp.intel.com> (raw)
In-Reply-To: <20160907053310.GC4357@yliu-dev.sh.intel.com>
> -----Original Message-----
> From: Yuanhan Liu [mailto:yuanhan.liu@linux.intel.com]
> Sent: Wednesday, September 7, 2016 1:33 PM
> To: Wang, Zhihong <zhihong.wang@intel.com>
> Cc: dev@dpdk.org; maxime.coquelin@redhat.com;
> thomas.monjalon@6wind.com
> Subject: Re: [PATCH v4 2/6] vhost: rewrite enqueue
>
> Hmmm, yet another email didn't send out successfully. Resend.
>
> BTW, please work out v5 on top of the latest next-virtio tree.
>
> Thanks.
Okay. Thanks.
>
> --yliu
>
> On Mon, Sep 05, 2016 at 02:39:25PM +0800, Yuanhan Liu wrote:
> ----
> On Mon, Aug 29, 2016 at 11:36:00PM -0400, Zhihong Wang wrote:
> > This patch implements the vhost logic from scratch into a single function
> > designed for high performance and better maintainability.
> >
> > This is the baseline version of the new code, more optimization will be
> > added in the following patches in this patch set.
> >
> > ---
> > Changes in v4:
> >
> > 1. Refactor the code for clearer logic.
> >
> > 2. Add PRINT_PACKET for debugging.
> >
> > ---
> > Changes in v3:
> >
> > 1. Rewrite enqueue and delete the obsolete in the same patch.
>
> Change log should go ---->
>
> > Signed-off-by: Zhihong Wang <zhihong.wang@intel.com>
> > ---
>
> ... here, after the SoB.
>
> > lib/librte_vhost/vhost_rxtx.c | 525 ++++++++++++-----------------------------
> -
> > 1 file changed, 145 insertions(+), 380 deletions(-)
> >
> > diff --git a/lib/librte_vhost/vhost_rxtx.c b/lib/librte_vhost/vhost_rxtx.c
> > index 5806f99..629e8ae 100644
> > --- a/lib/librte_vhost/vhost_rxtx.c
> > +++ b/lib/librte_vhost/vhost_rxtx.c
> > @@ -91,7 +91,7 @@ is_valid_virt_queue_idx(uint32_t idx, int is_tx,
> uint32_t qp_nb)
> > return (is_tx ^ (idx & 1)) == 0 && idx < qp_nb * VIRTIO_QNUM;
> > }
> >
> > -static void
> > +static inline void __attribute__((always_inline))
> > virtio_enqueue_offload(struct rte_mbuf *m_buf, struct virtio_net_hdr
> *net_hdr)
> > {
> > if (m_buf->ol_flags & PKT_TX_L4_MASK) {
> > @@ -112,6 +112,10 @@ virtio_enqueue_offload(struct rte_mbuf *m_buf,
> struct virtio_net_hdr *net_hdr)
> > cksum));
> > break;
> > }
> > + } else {
> > + net_hdr->flags = 0;
> > + net_hdr->csum_start = 0;
> > + net_hdr->csum_offset = 0;
> > }
> >
> > if (m_buf->ol_flags & PKT_TX_TCP_SEG) {
> > @@ -122,437 +126,198 @@ virtio_enqueue_offload(struct rte_mbuf
> *m_buf, struct virtio_net_hdr *net_hdr)
> > net_hdr->gso_size = m_buf->tso_segsz;
> > net_hdr->hdr_len = m_buf->l2_len + m_buf->l3_len
> > + m_buf->l4_len;
> > + } else {
> > + net_hdr->gso_type = 0;
> > + net_hdr->hdr_len = 0;
> > + net_hdr->gso_size = 0;
> > }
> > }
> >
> > -static inline void
> > -copy_virtio_net_hdr(struct virtio_net *dev, uint64_t desc_addr,
> > - struct virtio_net_hdr_mrg_rxbuf hdr)
> > +static inline void __attribute__((always_inline))
> > +update_used_ring(struct virtio_net *dev, struct vhost_virtqueue *vq,
> > + uint32_t desc_chain_head, uint32_t desc_chain_len)
> > {
> > - if (dev->vhost_hlen == sizeof(struct virtio_net_hdr_mrg_rxbuf))
> > - *(struct virtio_net_hdr_mrg_rxbuf *)(uintptr_t)desc_addr =
> hdr;
> > - else
> > - *(struct virtio_net_hdr *)(uintptr_t)desc_addr = hdr.hdr;
> > + uint32_t used_idx_round = vq->last_used_idx & (vq->size - 1);
>
> I'd suggest to use "used_idx", instead of "used_idx_round".
>
> > +
> > + vq->used->ring[used_idx_round].id = desc_chain_head;
> > + vq->used->ring[used_idx_round].len = desc_chain_len;
> > + vhost_log_used_vring(dev, vq, offsetof(struct vring_used,
> > + ring[used_idx_round]),
> > + sizeof(vq->used->ring[used_idx_round]));
> > }
> >
> > -static inline int __attribute__((always_inline))
> > -copy_mbuf_to_desc(struct virtio_net *dev, struct vhost_virtqueue *vq,
> > - struct rte_mbuf *m, uint16_t desc_idx)
> > +static inline uint32_t __attribute__((always_inline))
> > +enqueue_packet(struct virtio_net *dev, struct vhost_virtqueue *vq,
> > + uint16_t avail_idx, struct rte_mbuf *mbuf,
> > + uint32_t is_mrg_rxbuf)
> > {
> > - uint32_t desc_avail, desc_offset;
> > - uint32_t mbuf_avail, mbuf_offset;
> > - uint32_t cpy_len;
> > + struct virtio_net_hdr_mrg_rxbuf *virtio_hdr;
> > struct vring_desc *desc;
> > uint64_t desc_addr;
> > - struct virtio_net_hdr_mrg_rxbuf virtio_hdr = {{0, 0, 0, 0, 0, 0}, 0};
> > -
> > - desc = &vq->desc[desc_idx];
> > + uint32_t desc_chain_head;
> > + uint32_t desc_chain_len;
> > + uint32_t desc_current;
> > + uint32_t desc_offset;
> > + uint32_t mbuf_len;
> > + uint32_t mbuf_avail;
> > + uint32_t copy_len;
> > + uint32_t extra_buffers = 0;
>
> I'd name it to "num_buffers", to keep consistent with the virito hdr
> naming style.
>
> > +
> > + /* start with the first mbuf of the packet */
> > + mbuf_len = rte_pktmbuf_data_len(mbuf);
> > + mbuf_avail = mbuf_len;
> > +
> > + /* get the current desc */
> > + desc_current = vq->avail->ring[(vq->last_used_idx) & (vq->size - 1)];
> > + desc_chain_head = desc_current;
> > + desc = &vq->desc[desc_current];
> > desc_addr = gpa_to_vva(dev, desc->addr);
> > - /*
> > - * Checking of 'desc_addr' placed outside of 'unlikely' macro to avoid
> > - * performance issue with some versions of gcc (4.8.4 and 5.3.0)
> which
> > - * otherwise stores offset on the stack instead of in a register.
> > - */
> > - if (unlikely(desc->len < dev->vhost_hlen) || !desc_addr)
> > - return -1;
> > + if (unlikely(!desc_addr))
> > + goto error;
> >
> > - rte_prefetch0((void *)(uintptr_t)desc_addr);
> > + /* handle virtio header */
> > + virtio_hdr = (struct virtio_net_hdr_mrg_rxbuf
> *)(uintptr_t)desc_addr;
> > + virtio_enqueue_offload(mbuf, &(virtio_hdr->hdr));
> > + if (is_mrg_rxbuf)
> > + virtio_hdr->num_buffers = extra_buffers + 1;
> >
> > - virtio_enqueue_offload(m, &virtio_hdr.hdr);
> > - copy_virtio_net_hdr(dev, desc_addr, virtio_hdr);
> > vhost_log_write(dev, desc->addr, dev->vhost_hlen);
> > PRINT_PACKET(dev, (uintptr_t)desc_addr, dev->vhost_hlen, 0);
> > -
> > desc_offset = dev->vhost_hlen;
> > - desc_avail = desc->len - dev->vhost_hlen;
> > -
> > - mbuf_avail = rte_pktmbuf_data_len(m);
> > - mbuf_offset = 0;
> > - while (mbuf_avail != 0 || m->next != NULL) {
> > - /* done with current mbuf, fetch next */
> > - if (mbuf_avail == 0) {
> > - m = m->next;
> > -
> > - mbuf_offset = 0;
> > - mbuf_avail = rte_pktmbuf_data_len(m);
> > + desc_chain_len = desc_offset;
> > + desc_addr += desc_offset;
> > +
> > + /* start copy from mbuf to desc */
> > + while (mbuf_avail || mbuf->next) {
> > + /* get the next mbuf if the current done */
> > + if (!mbuf_avail) {
> > + mbuf = mbuf->next;
> > + mbuf_len = rte_pktmbuf_data_len(mbuf);
> > + mbuf_avail = mbuf_len;
> > }
> >
> > - /* done with current desc buf, fetch next */
> > - if (desc_avail == 0) {
> > - if ((desc->flags & VRING_DESC_F_NEXT) == 0) {
> > - /* Room in vring buffer is not enough */
> > - return -1;
> > - }
> > - if (unlikely(desc->next >= vq->size))
> > - return -1;
> > + /* get the next desc if the current done */
> > + if (desc->len <= desc_offset) {
> > + if (desc->flags & VRING_DESC_F_NEXT) {
> > + /* go on with the current desc chain */
> > + desc_offset = 0;
> > + desc_current = desc->next;
> > + desc = &vq->desc[desc_current];
> > + desc_addr = gpa_to_vva(dev, desc->addr);
> > + if (unlikely(!desc_addr))
> > + goto error;
> > + } else if (is_mrg_rxbuf) {
> > + /* start with the next desc chain */
> > + update_used_ring(dev, vq,
> desc_chain_head,
> > + desc_chain_len);
> > + vq->last_used_idx++;
>
> Why not putting "vq->last_used_idx++" into update_used_ring()?
>
> > + extra_buffers++;
> > + virtio_hdr->num_buffers++;
> > + if (avail_idx == vq->last_used_idx)
> > + goto error;
> > +
> > + desc_current =
> > + vq->avail->ring[(vq->last_used_idx)
> &
> > + (vq->size - 1)];
> > + desc_chain_head = desc_current;
> > + desc = &vq->desc[desc_current];
> > + desc_addr = gpa_to_vva(dev, desc->addr);
> > + if (unlikely(!desc_addr))
> > + goto error;
> >
> > - desc = &vq->desc[desc->next];
> > - desc_addr = gpa_to_vva(dev, desc->addr);
> > - if (unlikely(!desc_addr))
> > - return -1;
> > -
> > - desc_offset = 0;
> > - desc_avail = desc->len;
> > + desc_chain_len = 0;
> > + desc_offset = 0;
> > + } else
> > + goto error;
> > }
> >
> > - cpy_len = RTE_MIN(desc_avail, mbuf_avail);
> > - rte_memcpy((void *)((uintptr_t)(desc_addr + desc_offset)),
> > - rte_pktmbuf_mtod_offset(m, void *, mbuf_offset),
> > - cpy_len);
> > - vhost_log_write(dev, desc->addr + desc_offset, cpy_len);
> > - PRINT_PACKET(dev, (uintptr_t)(desc_addr + desc_offset),
> > - cpy_len, 0);
> > -
> > - mbuf_avail -= cpy_len;
> > - mbuf_offset += cpy_len;
> > - desc_avail -= cpy_len;
> > - desc_offset += cpy_len;
> > + /* copy mbuf data */
> > + copy_len = RTE_MIN(desc->len - desc_offset, mbuf_avail);
>
> TBH, I'm okay with copy_len (actually, I prefer it slightly). However,
> the old code uses cpy_len, the current dequeue function also uses cpy_len,
> I then see no good reason to use copy_len here. It's really not a good
> idea to me to use two different naming styles in one source file.
>
>
> > + rte_memcpy((void *)(uintptr_t)desc_addr,
> > + rte_pktmbuf_mtod_offset(mbuf, void *,
> > + mbuf_len - mbuf_avail),
>
> I would keep the old var "mbuf_offset" and do not introduce "mbuf_len".
> This could avoid above calculation and make it straightforward.
>
> > + copy_len);
> > + vhost_log_write(dev, desc->addr + desc_offset, copy_len);
> > + PRINT_PACKET(dev, (uintptr_t)desc_addr, copy_len, 0);
> > + mbuf_avail -= copy_len;
> > + desc_offset += copy_len;
> > + desc_addr += copy_len;
> > + desc_chain_len += copy_len;
>
> Vertical alighment[0] is not a must, but as you can see, it's a style I
> prefer. Meaning, if possible, please follow it.
>
> [0]: https://en.wikipedia.org/wiki/Programming_style#Vertical_alignment
>
> > }
> >
> > - return 0;
> > -}
> > + update_used_ring(dev, vq, desc_chain_head, desc_chain_len);
> > + vq->last_used_idx++;
> >
> ...
> > - rte_prefetch0(&vq->desc[desc_indexes[0]]);
> > - for (i = 0; i < count; i++) {
> > - uint16_t desc_idx = desc_indexes[i];
> > - int err;
> > + return 0;
> >
> > - err = copy_mbuf_to_desc(dev, vq, pkts[i], desc_idx);
> > - if (unlikely(err)) {
> > - used_idx = (start_idx + i) & (vq->size - 1);
> > - vq->used->ring[used_idx].len = dev->vhost_hlen;
> > - vhost_log_used_vring(dev, vq,
> > - offsetof(struct vring_used, ring[used_idx]),
> > - sizeof(vq->used->ring[used_idx]));
> > - }
> > +error:
> > + /* rollback on any error if last_used_idx update on-the-fly */
> > + vq->last_used_idx -= extra_buffers;
> >
> > - if (i + 1 < count)
> > - rte_prefetch0(&vq->desc[desc_indexes[i+1]]);
> > - }
> > + return 1;
>
> We normally returns -1 (but not 1) on error.
>
> >
> > +static inline void __attribute__((always_inline))
> > +notify_guest(struct virtio_net *dev, struct vhost_virtqueue *vq)
> > +{
> > rte_smp_wmb();
> > -
> > - *(volatile uint16_t *)&vq->used->idx += count;
> > - vq->last_used_idx += count;
> > - vhost_log_used_vring(dev, vq,
> > - offsetof(struct vring_used, idx),
> > - sizeof(vq->used->idx));
> > -
> > - /* flush used->idx update before we read avail->flags. */
> > + vq->used->idx = vq->last_used_idx;
>
> I will not drop the "volatile" cast here, sliently. You know this kind of
> stuff is tricky and would be painful to debug if it cause any issue. Such
> removal deserves a patch, as well as some explanations.
>
> > + vhost_log_used_vring(dev, vq, offsetof(struct vring_used, idx),
> > + sizeof(vq->used->idx));
> > rte_mb();
> > -
> > - /* Kick the guest if necessary. */
> > if (!(vq->avail->flags & VRING_AVAIL_F_NO_INTERRUPT)
> > && (vq->callfd >= 0))
> > eventfd_write(vq->callfd, (eventfd_t)1);
> > - return count;
> > }
> >
> ...
> > + /* start enqueuing packets 1 by 1 */
> > + avail_idx = *((volatile uint16_t *)&vq->avail->idx);
> > + while (pkt_left && avail_idx != vq->last_used_idx) {
> > + if (enqueue_packet(dev, vq, avail_idx, pkts[pkt_idx],
> > + is_mrg_rxbuf))
> > break;
> > - }
> > -
> > - nr_used = copy_mbuf_to_desc_mergeable(dev, vq, end,
> > - pkts[pkt_idx], buf_vec);
> > - rte_smp_wmb();
> > -
> > - *(volatile uint16_t *)&vq->used->idx += nr_used;
> > - vhost_log_used_vring(dev, vq, offsetof(struct vring_used,
> idx),
> > - sizeof(vq->used->idx));
> > - vq->last_used_idx += nr_used;
> > - }
> > -
> > - if (likely(pkt_idx)) {
> > - /* flush used->idx update before we read avail->flags. */
> > - rte_mb();
> >
> > - /* Kick the guest if necessary. */
> > - if (!(vq->avail->flags & VRING_AVAIL_F_NO_INTERRUPT)
> > - && (vq->callfd >= 0))
> > - eventfd_write(vq->callfd, (eventfd_t)1);
> > + pkt_idx++;
> > + pkt_sent++;
>
> pkt_idx and pkt_sent is duplicate here.
>
> --yliu
>
> > + pkt_left--;
> > }
> >
> > - return pkt_idx;
> > -}
> > -
> > -uint16_t
> > -rte_vhost_enqueue_burst(int vid, uint16_t queue_id,
> > - struct rte_mbuf **pkts, uint16_t count)
> > -{
> > - struct virtio_net *dev = get_device(vid);
> > -
> > - if (!dev)
> > - return 0;
> > + /* update used idx and kick the guest if necessary */
> > + if (pkt_sent)
> > + notify_guest(dev, vq);
> >
> > - if (dev->features & (1 << VIRTIO_NET_F_MRG_RXBUF))
> > - return virtio_dev_merge_rx(dev, queue_id, pkts, count);
> > - else
> > - return virtio_dev_rx(dev, queue_id, pkts, count);
> > + return pkt_sent;
> > }
> >
> > static void
> > --
> > 2.7.4
next prev parent reply other threads:[~2016-09-07 5:39 UTC|newest]
Thread overview: 140+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-16 3:50 [dpdk-dev] [PATCH] optimize vhost enqueue Zhihong Wang
2016-08-16 13:59 ` Maxime Coquelin
2016-08-17 1:45 ` Wang, Zhihong
2016-08-17 2:38 ` Yuanhan Liu
2016-08-17 6:41 ` Wang, Zhihong
2016-08-17 9:17 ` Maxime Coquelin
2016-08-17 9:51 ` Yuanhan Liu
2016-08-18 13:44 ` Wang, Zhihong
2016-08-17 10:07 ` Wang, Zhihong
2016-08-18 6:33 ` [dpdk-dev] [PATCH v2 0/6] vhost: optimize enqueue Zhihong Wang
2016-08-18 6:33 ` [dpdk-dev] [PATCH v2 1/6] vhost: rewrite enqueue Zhihong Wang
2016-08-19 2:39 ` Yuanhan Liu
2016-08-19 7:07 ` Wang, Zhihong
2016-08-18 6:33 ` [dpdk-dev] [PATCH v2 2/6] vhost: remove obsolete Zhihong Wang
2016-08-19 2:32 ` Yuanhan Liu
2016-08-19 7:08 ` Wang, Zhihong
2016-08-18 6:33 ` [dpdk-dev] [PATCH v2 3/6] vhost: remove useless volatile Zhihong Wang
2016-08-18 6:33 ` [dpdk-dev] [PATCH v2 4/6] vhost: add desc prefetch Zhihong Wang
2016-08-18 6:33 ` [dpdk-dev] [PATCH v2 5/6] vhost: batch update used ring Zhihong Wang
2016-08-18 6:33 ` [dpdk-dev] [PATCH v2 6/6] vhost: optimize cache access Zhihong Wang
2016-08-19 5:43 ` [dpdk-dev] [PATCH v3 0/5] vhost: optimize enqueue Zhihong Wang
2016-08-19 5:43 ` [dpdk-dev] [PATCH v3 1/5] vhost: rewrite enqueue Zhihong Wang
2016-08-22 9:35 ` Maxime Coquelin
2016-08-23 2:27 ` Wang, Zhihong
2016-08-25 4:00 ` Yuanhan Liu
2016-08-19 5:43 ` [dpdk-dev] [PATCH v3 2/5] vhost: remove useless volatile Zhihong Wang
2016-08-19 5:43 ` [dpdk-dev] [PATCH v3 3/5] vhost: add desc prefetch Zhihong Wang
2016-08-19 5:43 ` [dpdk-dev] [PATCH v3 4/5] vhost: batch update used ring Zhihong Wang
2016-08-25 3:48 ` Yuanhan Liu
2016-08-25 5:19 ` Wang, Zhihong
2016-08-19 5:43 ` [dpdk-dev] [PATCH v3 5/5] vhost: optimize cache access Zhihong Wang
2016-08-22 8:11 ` [dpdk-dev] [PATCH v3 0/5] vhost: optimize enqueue Maxime Coquelin
2016-08-22 10:01 ` Maxime Coquelin
2016-08-22 10:35 ` Thomas Monjalon
2016-08-24 3:37 ` Wang, Zhihong
2016-08-23 2:31 ` Wang, Zhihong
2016-08-23 10:43 ` Wang, Zhihong
2016-08-23 12:16 ` Maxime Coquelin
2016-08-23 12:22 ` Yuanhan Liu
2016-08-23 2:15 ` Wang, Zhihong
2016-09-21 8:50 ` Jianbo Liu
2016-09-21 9:27 ` Wang, Zhihong
2016-09-21 12:54 ` Jianbo Liu
2016-09-22 2:11 ` Wang, Zhihong
2016-09-22 2:29 ` Yuanhan Liu
2016-09-22 5:47 ` Jianbo Liu
2016-09-22 6:58 ` Wang, Zhihong
2016-09-22 9:01 ` Jianbo Liu
2016-09-22 10:04 ` Wang, Zhihong
2016-09-22 14:41 ` Jianbo Liu
2016-09-23 2:56 ` Wang, Zhihong
2016-09-23 10:41 ` Jianbo Liu
2016-09-23 13:41 ` Thomas Monjalon
2016-09-25 5:41 ` Wang, Zhihong
2016-09-26 5:12 ` Jianbo Liu
2016-09-26 5:25 ` Wang, Zhihong
2016-09-26 5:38 ` Jianbo Liu
2016-09-26 6:00 ` Wang, Zhihong
2016-09-26 4:24 ` Jianbo Liu
2016-09-26 5:37 ` Luke Gorrie
2016-09-26 5:40 ` Jianbo Liu
2016-09-27 10:21 ` Yuanhan Liu
2016-09-27 16:45 ` Wang, Zhihong
2016-10-09 12:09 ` Wang, Zhihong
2016-10-10 2:44 ` Yuanhan Liu
2016-10-10 5:31 ` Jianbo Liu
2016-10-10 6:22 ` Wang, Zhihong
2016-10-10 6:57 ` Jianbo Liu
2016-10-10 7:25 ` Wang, Zhihong
2016-10-12 2:53 ` Yuanhan Liu
2016-10-12 12:22 ` Wang, Zhihong
2016-10-12 15:31 ` Thomas Monjalon
2016-10-13 1:21 ` Wang, Zhihong
2016-10-13 3:51 ` Jianbo Liu
2016-10-13 5:33 ` Yuanhan Liu
2016-10-13 5:35 ` Yuanhan Liu
2016-10-13 6:02 ` Wang, Zhihong
2016-10-13 7:54 ` Maxime Coquelin
2016-10-13 9:23 ` Maxime Coquelin
2016-10-14 10:11 ` Yuanhan Liu
2016-08-30 3:35 ` [dpdk-dev] [PATCH v4 0/6] " Zhihong Wang
2016-08-30 3:35 ` [dpdk-dev] [PATCH v4 1/6] vhost: fix windows vm hang Zhihong Wang
2016-09-05 5:24 ` [dpdk-dev] [dpdk-stable] " Yuanhan Liu
2016-09-05 5:25 ` Wang, Zhihong
2016-09-05 5:40 ` Yuanhan Liu
2016-08-30 3:36 ` [dpdk-dev] [PATCH v4 2/6] vhost: rewrite enqueue Zhihong Wang
2016-09-05 6:39 ` Yuanhan Liu
2016-09-07 5:33 ` Yuanhan Liu
2016-09-07 5:39 ` Wang, Zhihong [this message]
2016-08-30 3:36 ` [dpdk-dev] [PATCH v4 3/6] vhost: remove useless volatile Zhihong Wang
2016-08-30 3:36 ` [dpdk-dev] [PATCH v4 4/6] vhost: add desc prefetch Zhihong Wang
2016-08-30 3:36 ` [dpdk-dev] [PATCH v4 5/6] vhost: batch update used ring Zhihong Wang
2016-08-30 3:36 ` [dpdk-dev] [PATCH v4 6/6] vhost: optimize cache access Zhihong Wang
2016-09-09 3:39 ` [dpdk-dev] [PATCH v5 0/6] vhost: optimize enqueue Zhihong Wang
2016-09-09 3:39 ` [dpdk-dev] [PATCH v5 1/6] vhost: fix windows vm hang Zhihong Wang
2016-09-09 3:39 ` [dpdk-dev] [PATCH v5 2/6] vhost: rewrite enqueue Zhihong Wang
2016-09-12 15:42 ` Maxime Coquelin
2016-09-14 8:20 ` Wang, Zhihong
2016-09-15 16:35 ` Maxime Coquelin
2016-09-12 16:26 ` Maxime Coquelin
2016-09-14 8:22 ` Wang, Zhihong
2016-09-18 14:19 ` Yuanhan Liu
2016-09-19 3:29 ` Wang, Zhihong
2016-09-09 3:39 ` [dpdk-dev] [PATCH v5 3/6] vhost: remove useless volatile Zhihong Wang
2016-09-09 3:39 ` [dpdk-dev] [PATCH v5 4/6] vhost: add desc prefetch Zhihong Wang
2016-09-09 3:39 ` [dpdk-dev] [PATCH v5 5/6] vhost: batch update used ring Zhihong Wang
2016-09-12 15:45 ` Maxime Coquelin
2016-09-14 8:43 ` Wang, Zhihong
2016-09-15 16:38 ` Maxime Coquelin
2016-09-18 2:55 ` Yuanhan Liu
2016-09-18 2:57 ` Wang, Zhihong
2016-09-09 3:39 ` [dpdk-dev] [PATCH v5 6/6] vhost: optimize cache access Zhihong Wang
2016-09-12 13:52 ` [dpdk-dev] [PATCH v5 0/6] vhost: optimize enqueue Maxime Coquelin
2016-09-12 13:56 ` Maxime Coquelin
2016-09-12 14:01 ` Yuanhan Liu
2016-09-20 2:00 ` [dpdk-dev] [PATCH v6 " Zhihong Wang
2016-09-20 2:00 ` [dpdk-dev] [PATCH v6 1/6] vhost: fix windows vm hang Zhihong Wang
2016-10-13 6:18 ` [dpdk-dev] [dpdk-stable] " Yuanhan Liu
2016-09-20 2:00 ` [dpdk-dev] [PATCH v6 2/6] vhost: rewrite enqueue Zhihong Wang
2016-09-22 9:58 ` Jianbo Liu
2016-09-22 10:13 ` Wang, Zhihong
2016-09-20 2:00 ` [dpdk-dev] [PATCH v6 3/6] vhost: remove useless volatile Zhihong Wang
2016-09-20 2:00 ` [dpdk-dev] [PATCH v6 4/6] vhost: add desc prefetch Zhihong Wang
2016-09-20 2:00 ` [dpdk-dev] [PATCH v6 5/6] vhost: batch update used ring Zhihong Wang
2016-09-20 2:00 ` [dpdk-dev] [PATCH v6 6/6] vhost: optimize cache access Zhihong Wang
2016-09-21 2:26 ` [dpdk-dev] [PATCH v6 0/6] vhost: optimize enqueue Yuanhan Liu
2016-09-21 4:39 ` Maxime Coquelin
2016-10-14 9:34 ` [dpdk-dev] [PATCH v7 0/7] vhost: optimize mergeable Rx path Yuanhan Liu
2016-10-14 9:34 ` [dpdk-dev] [PATCH v7 1/7] vhost: remove useless volatile Yuanhan Liu
2016-10-14 9:34 ` [dpdk-dev] [PATCH v7 2/7] vhost: optimize cache access Yuanhan Liu
2016-10-14 9:34 ` [dpdk-dev] [PATCH v7 3/7] vhost: simplify mergeable Rx vring reservation Yuanhan Liu
2016-10-25 22:08 ` Thomas Monjalon
2016-10-26 2:56 ` Yuanhan Liu
2016-10-14 9:34 ` [dpdk-dev] [PATCH v7 4/7] vhost: use last avail idx for avail ring reservation Yuanhan Liu
2016-10-14 9:34 ` [dpdk-dev] [PATCH v7 5/7] vhost: shadow used ring update Yuanhan Liu
2016-10-14 9:34 ` [dpdk-dev] [PATCH v7 6/7] vhost: prefetch avail ring Yuanhan Liu
2016-10-14 9:34 ` [dpdk-dev] [PATCH v7 7/7] vhost: retrieve avail head once Yuanhan Liu
2016-10-18 2:25 ` [dpdk-dev] [PATCH v7 0/7] vhost: optimize mergeable Rx path Jianbo Liu
2016-10-18 14:53 ` Maxime Coquelin
2016-10-21 7:51 ` Yuanhan Liu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8F6C2BD409508844A0EFC19955BE09414E70C1A7@SHSMSX103.ccr.corp.intel.com \
--to=zhihong.wang@intel.com \
--cc=dev@dpdk.org \
--cc=maxime.coquelin@redhat.com \
--cc=thomas.monjalon@6wind.com \
--cc=yuanhan.liu@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).