From: "Xing, Beilei" <beilei.xing@intel.com>
To: "David Harton (dharton)" <dharton@cisco.com>,
"Wu, Jingjing" <jingjing.wu@intel.com>
Cc: "dev@dpdk.org" <dev@dpdk.org>
Subject: Re: [dpdk-dev] [PATCH] i40e: fix i40e_validate_mac_addr to permit multicast addresses
Date: Tue, 12 Sep 2017 03:00:11 +0000 [thread overview]
Message-ID: <94479800C636CB44BD422CB454846E013201B65E@SHSMSX101.ccr.corp.intel.com> (raw)
In-Reply-To: <ea1600430e2848bcb56553c4a09441f1@XCH-RCD-016.cisco.com>
> -----Original Message-----
> From: David Harton (dharton) [mailto:dharton@cisco.com]
> Sent: Tuesday, September 12, 2017 1:23 AM
> To: Xing, Beilei <beilei.xing@intel.com>; Wu, Jingjing <jingjing.wu@intel.com>
> Cc: dev@dpdk.org
> Subject: RE: [PATCH] i40e: fix i40e_validate_mac_addr to permit multicast
> addresses
>
> Hi Beilei,
>
> > -----Original Message-----
> > From: Xing, Beilei [mailto:beilei.xing@intel.com]
> >
> > Hi,
> >
> > > -----Original Message-----
> > > From: David Harton [mailto:dharton@cisco.com]
> > >
> > > The i40e maintains a single MAC filter table for both unicast and
> > > multicast addresses. The i40e_validate_mac_addr function was
> > > preventing multicast addresses from being added to the table via
> > > i40evf_add_mac_addr. Fixed the issue by removing the multicast
> > > address check in i40e_validate_mac_addr.
> > >
> >
> > Maybe fix line is needed here.
>
> Please elaborate. If feel this is a regression and you want me to add a fixline
> can you offer the offending commit?
I think these two commit are related:
commit 4861cde4611601ccc9d467675f9d7a10c3095b54
commit 97ac72aa71a93d5c9bc5dc3ef1d1a324f38e61c8
>
> >
> > > Signed-off-by: David Harton <dharton@cisco.com>
> > > ---
> > > drivers/net/i40e/base/i40e_common.c | 12 +++++-------
> > > drivers/net/i40e/i40e_ethdev.c | 3 ++-
> > > 2 files changed, 7 insertions(+), 8 deletions(-)
> > >
> > > diff --git a/drivers/net/i40e/base/i40e_common.c
> > > b/drivers/net/i40e/base/i40e_common.c
> > > index 900d379..9779854 100644
> > > --- a/drivers/net/i40e/base/i40e_common.c
> > > +++ b/drivers/net/i40e/base/i40e_common.c
> > > @@ -969,10 +969,10 @@ struct i40e_rx_ptype_decoded
> > > i40e_ptype_lookup[] = {
> > >
> > >
> > > /**
> > > - * i40e_validate_mac_addr - Validate unicast MAC address
> > > + * i40e_validate_mac_addr - Validate MAC address
> > > * @mac_addr: pointer to MAC address
> > > *
> > > - * Tests a MAC address to ensure it is a valid Individual Address
> > > + * Tests a MAC address to ensure it is a valid Address
> > > **/
> > > enum i40e_status_code i40e_validate_mac_addr(u8 *mac_addr) { @@ -
> > > 980,13 +980,11 @@ enum i40e_status_code i40e_validate_mac_addr(u8
> > > *mac_addr)
> > >
> > > DEBUGFUNC("i40e_validate_mac_addr");
> > >
> > > - /* Broadcast addresses ARE multicast addresses
> > > - * Make sure it is not a multicast address
> > > + /*
> > > * Reject the zero address
> > > */
> > > - if (I40E_IS_MULTICAST(mac_addr) ||
> > > - (mac_addr[0] == 0 && mac_addr[1] == 0 && mac_addr[2] == 0 &&
> > > - mac_addr[3] == 0 && mac_addr[4] == 0 && mac_addr[5] == 0))
> > > + if (mac_addr[0] == 0 && mac_addr[1] == 0 && mac_addr[2] == 0 &&
> > > + mac_addr[3] == 0 && mac_addr[4] == 0 && mac_addr[5] == 0)
> > > status = I40E_ERR_INVALID_MAC_ADDR;
> > >
> >
> > We'd better not to change the base code which is from kernel driver.
> > How about changing the i40evf_add_mac_addr function as following:
> > - if (i40e_validate_mac_addr(addr->addr_bytes) != I40E_SUCCESS) {
> > + if (is_zero_ether_addr (addr->addr_bytes) != I40E_SUCCESS) {
> >
> > Then following modification in eth_i40e_dev_init function can be removed.
> > But we should also pay attention to other functions which call
> > i40evf_add_mac_addr.
>
> Sure. I'll post a new patch as suggested once the fixline question is answered.
>
> I was trying to fix the issue the way I did in case i40e passthru wanted to
> benefit. Your suggestion will work for the VF as the only other caller for
> i40evf_add_mac_addr() performs its own macaddr validation.
>
> Thanks,
> Dave
>
> >
> > Beilei
> >
> > > return status;
> > > diff --git a/drivers/net/i40e/i40e_ethdev.c
> > > b/drivers/net/i40e/i40e_ethdev.c index 5f26e24..00b6082 100644
> > > --- a/drivers/net/i40e/i40e_ethdev.c
> > > +++ b/drivers/net/i40e/i40e_ethdev.c
> > > @@ -1199,7 +1199,8 @@ eth_i40e_dev_init(struct rte_eth_dev *dev)
> > >
> > > /* Get and check the mac address */
> > > i40e_get_mac_addr(hw, hw->mac.addr);
> > > - if (i40e_validate_mac_addr(hw->mac.addr) != I40E_SUCCESS) {
> > > + if (i40e_validate_mac_addr(hw->mac.addr) != I40E_SUCCESS ||
> > > + I40E_IS_MULTICAST(hw->mac.addr)) {
> > > PMD_INIT_LOG(ERR, "mac address is not valid");
> > > ret = -EIO;
> > > goto err_get_mac_addr;
> > > --
> > > 2.10.3.dirty
next prev parent reply other threads:[~2017-09-12 3:00 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-08-22 22:21 David Harton
2017-08-31 15:53 ` Ferruh Yigit
2017-08-31 16:04 ` David Harton (dharton)
2017-09-08 12:51 ` David Harton (dharton)
2017-09-08 12:56 ` Ferruh Yigit
2017-09-11 5:41 ` Xing, Beilei
2017-09-11 17:22 ` David Harton (dharton)
2017-09-12 3:00 ` Xing, Beilei [this message]
2017-09-12 13:02 ` [dpdk-dev] [PATCH v2] i40e: fix i40evf_add_mac_addr " David Harton
2017-09-13 2:20 ` Xing, Beilei
2017-09-13 2:38 ` David Harton (dharton)
2017-09-13 2:43 ` Xing, Beilei
2017-09-13 3:21 ` [dpdk-dev] [PATCH v3] " David Harton
2017-09-13 3:42 ` Xing, Beilei
2017-09-14 18:55 ` Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=94479800C636CB44BD422CB454846E013201B65E@SHSMSX101.ccr.corp.intel.com \
--to=beilei.xing@intel.com \
--cc=dev@dpdk.org \
--cc=dharton@cisco.com \
--cc=jingjing.wu@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).