From: "Xing, Beilei" <beilei.xing@intel.com>
To: "Zhang, Xiao" <xiao.zhang@intel.com>, "dev@dpdk.org" <dev@dpdk.org>
Cc: "Zhang, Qi Z" <qi.z.zhang@intel.com>,
"stable@dpdk.org" <stable@dpdk.org>
Subject: Re: [dpdk-stable] [v2] net/i40e: fix vf runtime queues rss config
Date: Fri, 9 Aug 2019 02:44:26 +0000 [thread overview]
Message-ID: <94479800C636CB44BD422CB454846E013CE222D5@SHSMSX101.ccr.corp.intel.com> (raw)
In-Reply-To: <1565282473-35661-1-git-send-email-xiao.zhang@intel.com>
> -----Original Message-----
> From: Zhang, Xiao
> Sent: Friday, August 9, 2019 12:41 AM
> To: dev@dpdk.org
> Cc: Xing, Beilei <beilei.xing@intel.com>; Zhang, Qi Z <qi.z.zhang@intel.com>;
> Zhang, Xiao <xiao.zhang@intel.com>; stable@dpdk.org
> Subject: [v2] net/i40e: fix vf runtime queues rss config
>
> I40evf queue can not work properly with kernel pf driver. Eg. when configure
> 8 queues pair, only 4 queues can receive packets, and half packets will be lost
> if using 2 queues pair.
> This issue is caused by misconfiguration of look up table, use aq command to
> setup the lut to make it work properly.
>
> Fixes: cea7a51c1750 ("i40evf: support RSS")
> Cc: stable@dpdk.org
>
> Signed-off-by: Xiao Zhang <xiao.zhang@intel.com>
> ---
> v2 change for loop format to avoid build patch issue.
> ---
> drivers/net/i40e/i40e_ethdev_vf.c | 36 +++++++++++++++++++++++++++++---
> ----
> 1 file changed, 29 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/net/i40e/i40e_ethdev_vf.c
> b/drivers/net/i40e/i40e_ethdev_vf.c
> index 308fb98..2d3cf3e 100644
> --- a/drivers/net/i40e/i40e_ethdev_vf.c
> +++ b/drivers/net/i40e/i40e_ethdev_vf.c
> @@ -2574,6 +2574,26 @@ i40evf_hw_rss_hash_set(struct i40e_vf *vf, struct
> rte_eth_rss_conf *rss_conf)
> if (ret)
> return ret;
>
> + if (vf->flags & I40E_FLAG_RSS_AQ_CAPABLE) {
> + uint8_t *lut;
> + uint32_t rss_lut_size = (I40E_VFQF_HLUT1_MAX_INDEX + 1) *
> 4;
> + uint32_t i;
> + lut = rte_zmalloc("i40e_rss_lut", rss_lut_size, 0);
> + if (!lut) {
> + PMD_DRV_LOG(ERR, "No memory can be allocated");
> + return -ENOMEM;
> + }
> +
> + for (i = 0; i < rss_lut_size; i++)
> + lut[i] = i % vf->num_queue_pairs;
> +
> + ret = i40evf_set_rss_lut(&vf->vsi, lut,
> + rss_lut_size);
> + rte_free(lut);
> + if (ret)
> + return ret;
> + }
> +
Why not moving the LUT configuration to the following i40evf_config_rss function?
> hena = i40e_config_hena(vf->adapter, rss_conf->rss_hf);
> i40e_write_rx_ctl(hw, I40E_VFQF_HENA(0), (uint32_t)hena);
> i40e_write_rx_ctl(hw, I40E_VFQF_HENA(1), (uint32_t)(hena >> 32));
> @@ -2607,13 +2627,15 @@ i40evf_config_rss(struct i40e_vf *vf)
> }
>
> num = RTE_MIN(vf->dev_data->nb_rx_queues,
> I40E_MAX_QP_NUM_PER_VF);
> - /* Fill out the look up table */
> - for (i = 0, j = 0; i < nb_q; i++, j++) {
> - if (j >= num)
> - j = 0;
> - lut = (lut << 8) | j;
> - if ((i & 3) == 3)
> - I40E_WRITE_REG(hw, I40E_VFQF_HLUT(i >> 2), lut);
> + if (!(vf->flags & I40E_FLAG_RSS_AQ_CAPABLE)) {
> + /* Fill out the look up table */
> + for (i = 0, j = 0; i < nb_q; i++, j++) {
> + if (j >= num)
> + j = 0;
> + lut = (lut << 8) | j;
> + if ((i & 3) == 3)
> + I40E_WRITE_REG(hw, I40E_VFQF_HLUT(i >>
> 2), lut);
> + }
> }
>
> rss_conf = vf->dev_data->dev_conf.rx_adv_conf.rss_conf;
> --
> 2.7.4
next prev parent reply other threads:[~2019-08-09 2:44 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-07 0:09 [dpdk-stable] " Xiao Zhang
2019-08-08 16:41 ` [dpdk-stable] [v2] " Xiao Zhang
2019-08-09 2:44 ` Xing, Beilei [this message]
2019-08-09 3:25 ` Zhang, Xiao
2019-08-12 10:29 ` [dpdk-stable] [v3] " Xiao Zhang
2019-08-12 17:43 ` [dpdk-stable] [v4] " Xiao Zhang
2019-08-12 12:07 ` [dpdk-stable] [dpdk-dev] " Aaron Conole
2019-08-13 1:43 ` [dpdk-stable] " Xing, Beilei
2019-08-13 10:40 ` [dpdk-stable] [v5] " Xiao Zhang
2019-08-13 2:21 ` Xing, Beilei
2019-08-13 6:28 ` [dpdk-stable] [dpdk-dev] " Ye Xiaolong
2019-08-13 7:24 ` Zhang, Xiao
2019-08-13 7:37 ` Ye Xiaolong
2019-08-13 7:59 ` Zhang, Xiao
2019-08-13 22:17 ` [dpdk-stable] [v6] " Xiao Zhang
2019-08-13 14:55 ` Ye Xiaolong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=94479800C636CB44BD422CB454846E013CE222D5@SHSMSX101.ccr.corp.intel.com \
--to=beilei.xing@intel.com \
--cc=dev@dpdk.org \
--cc=qi.z.zhang@intel.com \
--cc=stable@dpdk.org \
--cc=xiao.zhang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).