From: fengchengwen <fengchengwen@huawei.com>
To: Honnappa Nagarahalli <Honnappa.Nagarahalli@arm.com>,
Konstantin Ananyev <konstantin.v.ananyev@yandex.ru>,
"dev@dpdk.org" <dev@dpdk.org>,
"thomas@monjalon.net" <thomas@monjalon.net>,
Ferruh Yigit <ferruh.yigit@amd.com>,
Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>,
Kalesh AP <kalesh-anakkur.purayil@broadcom.com>,
"Ajit Khaparde (ajit.khaparde@broadcom.com)"
<ajit.khaparde@broadcom.com>
Cc: nd <nd@arm.com>
Subject: Re: [PATCH 1/5] ethdev: fix race-condition of proactive error handling mode
Date: Tue, 7 Mar 2023 16:39:02 +0800 [thread overview]
Message-ID: <95edd6ca-fe1f-fd7c-719f-0a9e6d7c45b5@huawei.com> (raw)
In-Reply-To: <DBAPR08MB581421B8E3850015FCABC85A98B79@DBAPR08MB5814.eurprd08.prod.outlook.com>
On 2023/3/7 13:34, Honnappa Nagarahalli wrote:
>
>
>> -----Original Message-----
>> From: Konstantin Ananyev <konstantin.v.ananyev@yandex.ru>
>> Sent: Sunday, March 5, 2023 9:24 AM
>> To: Honnappa Nagarahalli <Honnappa.Nagarahalli@arm.com>;
>> dev@dpdk.org; Chengwen Feng <fengchengwen@huawei.com>;
>> thomas@monjalon.net; Ferruh Yigit <ferruh.yigit@amd.com>; Andrew
>> Rybchenko <andrew.rybchenko@oktetlabs.ru>; Kalesh AP <kalesh-
>> anakkur.purayil@broadcom.com>; Ajit Khaparde
>> (ajit.khaparde@broadcom.com) <ajit.khaparde@broadcom.com>
>> Cc: nd <nd@arm.com>
>> Subject: Re: [PATCH 1/5] ethdev: fix race-condition of proactive error handling
>> mode
>>
>>
>>>>>>
>>>>>> In the proactive error handling mode, the PMD will set the data
>>>>>> path pointers to dummy functions and then try recovery, in this
>>>>>> period the application may still invoking data path API. This will
>>>>>> introduce a race-condition with data path which may lead to crash [1].
>>>>>>
>>>>>> Although the PMD added delay after setting data path pointers to
>>>>>> cover the above race-condition, it reduces the probability, but it
>>>>>> doesn't solve the problem.
>>>>>>
>>>>>> To solve the race-condition problem fundamentally, the following
>>>>>> requirements are added:
>>>>>> 1. The PMD should set the data path pointers to dummy functions after
>>>>>> report RTE_ETH_EVENT_ERR_RECOVERING event.
>>>>> Do you mean to say, PMD should set the data path pointers after
>>>>> calling the
>>>> call back function?
>>>>> The PMD is running in the context of multiple EAL threads. How do
>>>>> these
>>>> threads synchronize such that only one thread sets these data pointers?
>>>>
>>>> As I understand this event callback supposed to be called in the
>>>> context of EAL interrupt thread (whoever is more familiar with
>>>> original idea, feel free to correct me if I missed something).
>>> I could not figure this out. It looks to be called from the data plane thread
>> context.
>>> I also have a thought on alternate design at the end, appreciate if you can
>> take a look.
>>>
>>>> How it is going to signal data-path threads that they need to
>>>> stop/suspend calling data-path API - that's I suppose is left to application
>> to decide...
>>>> Same as right now it is application responsibility to stop data-path
>>>> threads before doing dev_stop()/dev/_config()/etc.
>>> Ok, good, this expectation is not new. The application must have a
>> mechanism already.
>>>
>>>>
>>>>
>>>>>
>>>>>> 2. The application should stop data path API invocation when process
>>>>>> the RTE_ETH_EVENT_ERR_RECOVERING event.
>>>>> Any thoughts on how an application can do this?
>>> We can ignore this question as there is already similar expectation set for
>> earlier functionalities.
>>>
>>>>>
>>>>>> 3. The PMD should set the data path pointers to valid functions before
>>>>>> report RTE_ETH_EVENT_RECOVERY_SUCCESS event.
>>>>>> 4. The application should enable data path API invocation when process
>>>>>> the RTE_ETH_EVENT_RECOVERY_SUCCESS event.
>>>>> Do you mean to say that the application should not call the datapath
>>>>> APIs
>>>> while the PMD is running the recovery process?
>>>>
>>>> Yes, I believe that's the intention.
>>> Ok, this is good and makes sense.
>>>
>>>>
>>>>>>
>>>>>> Also, this patch introduce a driver internal function
>>>>>> rte_eth_fp_ops_setup which used as an help function for PMD.
>>>>>>
>>>>>> [1]
>>>>>>
>>>>
>> http://patchwork.dpdk.org/project/dpdk/patch/20230220060839.1267349-2
>>>>>> -
>>>>>> ashok.k.kaladi@intel.com/
>>>>>>
>>>>>> Fixes: eb0d471a8941 ("ethdev: add proactive error handling mode")
>>>>>> Cc: stable@dpdk.org
>>>>>>
>>>>>> Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
>>>>>> ---
>>>>>> doc/guides/prog_guide/poll_mode_drv.rst | 20 +++++++---------
>>>>>> lib/ethdev/ethdev_driver.c | 8 +++++++
>>>>>> lib/ethdev/ethdev_driver.h | 10 ++++++++
>>>>>> lib/ethdev/rte_ethdev.h | 32 +++++++++++++++----------
>>>>>> lib/ethdev/version.map | 1 +
>>>>>> 5 files changed, 46 insertions(+), 25 deletions(-)
>>>>>>
>>>>>> diff --git a/doc/guides/prog_guide/poll_mode_drv.rst
>>>>>> b/doc/guides/prog_guide/poll_mode_drv.rst
>>>>>> index c145a9066c..e380ff135a 100644
>>>>>> --- a/doc/guides/prog_guide/poll_mode_drv.rst
>>>>>> +++ b/doc/guides/prog_guide/poll_mode_drv.rst
>>>>>> @@ -638,14 +638,9 @@ different from the application invokes
>>>>>> recovery in PASSIVE mode, the PMD automatically recovers from
>>>>>> error in PROACTIVE mode, and only a small amount of work is
>>>>>> required for the
>>>> application.
>>>>>>
>>>>>> -During error detection and automatic recovery, -the PMD sets the
>>>>>> data path pointers to dummy functions -(which will prevent the
>>>>>> crash), -and also make sure the control path operations fail with a
>>>>>> return
>>>> code ``-EBUSY``.
>>>>>> -
>>>>>> -Because the PMD recovers automatically, -the application can only
>>>>>> sense that the data flow is disconnected for a while -and the
>>>>>> control API returns an error in this period.
>>>>>> +During error detection and automatic recovery, the PMD sets the
>>>>>> +data path pointers to dummy functions and also make sure the
>>>>>> +control path operations failed with a return code ``-EBUSY``.
>>>>>>
>>>>>> In order to sense the error happening/recovering, as well as to
>>>>>> restore some additional configuration, @@ -653,9 +648,9 @@ three
>>>>>> events
>>>> are available:
>>>>>>
>>>>>> ``RTE_ETH_EVENT_ERR_RECOVERING``
>>>>>> Notify the application that an error is detected
>>>>>> - and the recovery is being started.
>>>>>> + and the recovery is about to start.
>>>>>> Upon receiving the event, the application should not invoke
>>>>>> - any control path function until receiving
>>>>>> + any control and data path API until receiving
>>>>>> ``RTE_ETH_EVENT_RECOVERY_SUCCESS`` or
>>>>>> ``RTE_ETH_EVENT_RECOVERY_FAILED`` event.
>>>>>>
>>>>>> .. note::
>>>>>> @@ -666,8 +661,9 @@ three events are available:
>>>>>>
>>>>>> ``RTE_ETH_EVENT_RECOVERY_SUCCESS``
>>>>>> Notify the application that the recovery from error is successful,
>>>>>> - the PMD already re-configures the port,
>>>>>> - and the effect is the same as a restart operation.
>>>>>> + the PMD already re-configures the port.
>>>>>> + The application should restore some additional configuration,
>>>>>> + and then
>>>>> What is the additional configuration? Is this specific to each NIC/PMD?
>>>>> I thought, this is an auto recovery process and the application does
>>>>> not require
>>>> to reconfigure anything. If the application has to restore the
>>>> configuration, how does auto recovery differ from typical recovery
>> process?
>>>>>
>>>>>> + enable data path API invocation.
>>>>>>
>>>>>> ``RTE_ETH_EVENT_RECOVERY_FAILED``
>>>>>> Notify the application that the recovery from error failed,
>>>>>> diff --git a/lib/ethdev/ethdev_driver.c
>>>>>> b/lib/ethdev/ethdev_driver.c index
>>>>>> 0be1e8ca04..f994653fe9 100644
>>>>>> --- a/lib/ethdev/ethdev_driver.c
>>>>>> +++ b/lib/ethdev/ethdev_driver.c
>>>>>> @@ -515,6 +515,14 @@ rte_eth_dma_zone_free(const struct
>> rte_eth_dev
>>>>>> *dev, const char *ring_name,
>>>>>> return rc;
>>>>>> }
>>>>>>
>>>>>> +void
>>>>>> +rte_eth_fp_ops_setup(struct rte_eth_dev *dev) {
>>>>>> + if (dev == NULL)
>>>>>> + return;
>>>>>> + eth_dev_fp_ops_setup(rte_eth_fp_ops + dev->data->port_id, dev); }
>>>>>> +
>>>>>> const struct rte_memzone *
>>>>>> rte_eth_dma_zone_reserve(const struct rte_eth_dev *dev, const
>>>>>> char *ring_name,
>>>>>> uint16_t queue_id, size_t size, unsigned int align, diff
>> -
>>>> -git
>>>>>> a/lib/ethdev/ethdev_driver.h b/lib/ethdev/ethdev_driver.h index
>>>>>> 2c9d615fb5..0d964d1f67 100644
>>>>>> --- a/lib/ethdev/ethdev_driver.h
>>>>>> +++ b/lib/ethdev/ethdev_driver.h
>>>>>> @@ -1621,6 +1621,16 @@ int
>>>>>> rte_eth_dma_zone_free(const struct rte_eth_dev *eth_dev, const
>>>>>> char *name,
>>>>>> uint16_t queue_id);
>>>>>>
>>>>>> +/**
>>>>>> + * @internal
>>>>>> + * Setup eth fast-path API to ethdev values.
>>>>>> + *
>>>>>> + * @param dev
>>>>>> + * Pointer to struct rte_eth_dev.
>>>>>> + */
>>>>>> +__rte_internal
>>>>>> +void rte_eth_fp_ops_setup(struct rte_eth_dev *dev);
>>>>>> +
>>>>>> /**
>>>>>> * @internal
>>>>>> * Atomically set the link status for the specific device.
>>>>>> diff --git a/lib/ethdev/rte_ethdev.h b/lib/ethdev/rte_ethdev.h
>>>>>> index
>>>>>> 049641d57c..44ee7229c1 100644
>>>>>> --- a/lib/ethdev/rte_ethdev.h
>>>>>> +++ b/lib/ethdev/rte_ethdev.h
>>>>>> @@ -3944,25 +3944,28 @@ enum rte_eth_event_type {
>>>>>> */
>>>>>> RTE_ETH_EVENT_RX_AVAIL_THRESH,
>>>>>> /** Port recovering from a hardware or firmware error.
>>>>>> - * If PMD supports proactive error recovery,
>>>>>> - * it should trigger this event to notify application
>>>>>> - * that it detected an error and the recovery is being started.
>>>>>> - * Upon receiving the event, the application should not invoke any
>>>>>> control path API
>>>>>> - * (such as rte_eth_dev_configure/rte_eth_dev_stop...) until receiving
>>>>>> - * RTE_ETH_EVENT_RECOVERY_SUCCESS or
>>>>>> RTE_ETH_EVENT_RECOVERY_FAILED event.
>>>>>> - * The PMD will set the data path pointers to dummy functions,
>>>>>> - * and re-set the data path pointers to non-dummy functions
>>>>>> - * before reporting RTE_ETH_EVENT_RECOVERY_SUCCESS event.
>>>>>> - * It means that the application cannot send or receive any packets
>>>>>> - * during this period.
>>>>>> + *
>>>>>> + * If PMD supports proactive error recovery, it should trigger this
>>>>>> + * event to notify application that it detected an error and the
>>>>>> + * recovery is about to start.
>>>>>> + *
>>>>>> + * Upon receiving the event, the application should not invoke any
>>>>>> + * control and data path API until receiving
>>>>>> + * RTE_ETH_EVENT_RECOVERY_SUCCESS or
>>>>>> RTE_ETH_EVENT_RECOVERY_FAILED
>>>>>> + * event.
>>>>>> + *
>>>>>> + * Once this event is reported, the PMD will set the data path pointers
>>>>>> + * to dummy functions, and re-set the data path pointers to valid
>>>>>> + * functions before reporting RTE_ETH_EVENT_RECOVERY_SUCCESS
>>>>>> event.
>>>>> Why do we need to set the data path pointers to dummy functions if
>>>>> the
>>>> application is restricted from invoking any control and data path
>>>> APIs till the recovery process is completed?
>>>>
>>>> You are right, in theory it is not mandatory.
>>>> Though it helps to flag a problem if user will still try to call them
>>>> while recovery is in progress.
>>> Ok, may be in debug mode.
>>> I mean, we have already set an expectation to the application that it should
>> not call and the application has implemented a method to do the same. Why
>> do we need to complicate this?
>>> If the application calls the APIs, it is a programming error.
>>
>>
>> My preference would be to keep it this way for both debug and non-debug
>> mode.
>> It doesn't cost anything to us in terms of perfomance, but helps to catch
>> problems with wrong behaving app.
>
> This is also causing a synchronization problem. i.e. if this has to be done correctly, we need to use correct synchronization mechanisms.
> We cannot set the function pointers and assume that data will be visible to other threads/cores in the correct order.
> A possible mechanism (though I see some problems with this) could be to use a guard variable, which indicates when it is safe to use the function pointers on the data plane threads. This would require a load-acquire in the data plane threads.
>
>>
>>>
>>>> Again, same as we doing in dev_stop().
>>>
>>>>
>>>>>
>>>>>> + *
>>>>>> * @note Before the PMD reports the recovery result,
>>>>>> * the PMD may report the RTE_ETH_EVENT_ERR_RECOVERING event
>>>>>> again,
>>>>>> * because a larger error may occur during the recovery.
>>>>>> */
>>>>>> RTE_ETH_EVENT_ERR_RECOVERING,
>>>>> I understand this is not a change in this patch. But, just
>>>>> wondering, what is the
>>>> purpose of this? How is the application supposed to use this?
>>>>>
>>>>>> /** Port recovers successfully from the error.
>>>>>> - * The PMD already re-configured the port,
>>>>>> - * and the effect is the same as a restart operation.
>>>>>> + *
>>>>>> + * The PMD already re-configured the port:
>>>>>> * a) The following operation will be retained: (alphabetically)
>>>>>> * - DCB configuration
>>>>>> * - FEC configuration
>>>>>> @@ -3989,6 +3992,9 @@ enum rte_eth_event_type {
>>>>>> * (@see RTE_ETH_DEV_CAPA_FLOW_SHARED_OBJECT_KEEP)
>>>>>> * c) Any other configuration will not be stored
>>>>>> * and will need to be re-configured.
>>>>>> + *
>>>>>> + * The application should restore some additional configuration
>>>>>> + * (see above case b/c), and then enable data path API invocation.
>>>>>> */
>>>>>> RTE_ETH_EVENT_RECOVERY_SUCCESS,
>>>>>> /** Port recovery failed.
>>>>>> diff --git a/lib/ethdev/version.map b/lib/ethdev/version.map index
>>>>>> 357d1a88c0..c273e0bdae 100644
>>>>>> --- a/lib/ethdev/version.map
>>>>>> +++ b/lib/ethdev/version.map
>>>>>> @@ -320,6 +320,7 @@ INTERNAL {
>>>>>> rte_eth_devices;
>>>>>> rte_eth_dma_zone_free;
>>>>>> rte_eth_dma_zone_reserve;
>>>>>> + rte_eth_fp_ops_setup;
>>>>>> rte_eth_hairpin_queue_peer_bind;
>>>>>> rte_eth_hairpin_queue_peer_unbind;
>>>>>> rte_eth_hairpin_queue_peer_update;
>>>>>> --
>>>>>> 2.17.1
>>>>>
>>>
>>> Is there any reason not to design this in the same way as
>> 'rte_eth_dev_reset'? Why does the PMD have to recover by itself?
>>
>> I suppose it is a question for the authors of original patch...
> Appreciate if the authors could comment on this.
The main cause is that the hardware implementation limit, I will try to
explain from hns3 PMD's view.
For a global reset, all the function need responsed within a centain period
of time. otherwise, the reset will fail. and also the reset requirement a few
steps (all may take a long time).
When with multiple functions in one DPDK, and trigger a global reset, the
rte_eth_dev_reset will not cover this scene:
1. each port's will report RTE_ETH_EVENT_INTR_RESET in interrupt thread.
2. then invoke application callback, but due to the same thread, and each
port's recover will take a long time, so later port will reset failed.
>
>>
>>> We could have a similar API 'rte_eth_dev_recover' to do the recovery
>> functionality.
>>
>> I suppose such approach is also possible.
>> Personally I am fine with both ways: either existing one or what you propose,
>> as long as we'll fix existing race-condition.
>> What is good with what you suggest - that way we probably don't need to
>> worry how to allow user to enable/disable auto-recovery inside PMD.
>>
>> Konstantin
>>
>
next prev parent reply other threads:[~2023-03-07 8:39 UTC|newest]
Thread overview: 86+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-01 3:06 [PATCH 0/5] " Chengwen Feng
2023-03-01 3:06 ` [PATCH 1/5] ethdev: " Chengwen Feng
2023-03-02 12:08 ` Konstantin Ananyev
2023-03-03 16:51 ` Ferruh Yigit
2023-03-05 14:53 ` Konstantin Ananyev
2023-03-06 8:55 ` Ferruh Yigit
2023-03-06 10:22 ` Konstantin Ananyev
2023-03-06 11:00 ` Ferruh Yigit
2023-03-06 11:05 ` Ajit Khaparde
2023-03-06 11:13 ` Konstantin Ananyev
2023-03-07 8:25 ` fengchengwen
2023-03-07 9:52 ` Konstantin Ananyev
2023-03-07 10:11 ` Konstantin Ananyev
2023-03-07 12:07 ` Ferruh Yigit
2023-03-07 12:26 ` fengchengwen
2023-03-07 12:39 ` Konstantin Ananyev
2023-03-09 2:05 ` Ajit Khaparde
2023-03-06 1:41 ` fengchengwen
2023-03-06 8:57 ` Ferruh Yigit
2023-03-06 9:10 ` Ferruh Yigit
2023-03-02 23:30 ` Honnappa Nagarahalli
2023-03-03 0:21 ` Konstantin Ananyev
2023-03-04 5:08 ` Honnappa Nagarahalli
2023-03-05 15:23 ` Konstantin Ananyev
2023-03-07 5:34 ` Honnappa Nagarahalli
2023-03-07 8:39 ` fengchengwen [this message]
2023-03-08 1:09 ` Honnappa Nagarahalli
2023-03-09 0:59 ` fengchengwen
2023-03-09 3:03 ` Honnappa Nagarahalli
2023-03-09 11:30 ` fengchengwen
2023-03-10 3:25 ` Honnappa Nagarahalli
2023-03-07 9:56 ` Konstantin Ananyev
2023-03-01 3:06 ` [PATCH 2/5] net/hns3: replace fp ops config function Chengwen Feng
2023-03-02 6:50 ` Dongdong Liu
2023-03-01 3:06 ` [PATCH 3/5] net/bnxt: fix race-condition when report error recovery Chengwen Feng
2023-03-02 12:23 ` Konstantin Ananyev
2023-03-01 3:06 ` [PATCH 4/5] net/bnxt: use fp ops setup function Chengwen Feng
2023-03-02 12:30 ` Konstantin Ananyev
2023-03-03 0:01 ` Konstantin Ananyev
2023-03-03 1:17 ` Ajit Khaparde
2023-03-03 2:02 ` fengchengwen
2023-03-03 1:38 ` fengchengwen
2023-03-05 15:57 ` Konstantin Ananyev
2023-03-06 2:47 ` Ajit Khaparde
2023-03-01 3:06 ` [PATCH 5/5] app/testpmd: add error recovery usage demo Chengwen Feng
2023-03-02 13:01 ` Konstantin Ananyev
2023-03-03 1:49 ` fengchengwen
2023-03-03 16:59 ` Ferruh Yigit
2023-09-21 11:12 ` [PATCH 0/5] fix race-condition of proactive error handling mode Ferruh Yigit
2023-10-07 2:32 ` fengchengwen
2023-10-20 10:07 ` [PATCH v2 0/7] " Chengwen Feng
2023-10-20 10:07 ` [PATCH v2 1/7] ethdev: " Chengwen Feng
2023-11-01 3:39 ` lihuisong (C)
2023-10-20 10:07 ` [PATCH v2 2/7] net/hns3: replace fp ops config function Chengwen Feng
2023-11-01 3:40 ` lihuisong (C)
2023-11-02 10:34 ` Konstantin Ananyev
2023-10-20 10:07 ` [PATCH v2 3/7] net/bnxt: fix race-condition when report error recovery Chengwen Feng
2023-11-02 16:28 ` Ajit Khaparde
2023-10-20 10:07 ` [PATCH v2 4/7] net/bnxt: use fp ops setup function Chengwen Feng
2023-11-01 3:48 ` lihuisong (C)
2023-11-02 10:34 ` Konstantin Ananyev
2023-11-02 16:29 ` Ajit Khaparde
2023-10-20 10:07 ` [PATCH v2 5/7] app/testpmd: add error recovery usage demo Chengwen Feng
2023-11-01 4:08 ` lihuisong (C)
2023-11-06 13:01 ` fengchengwen
2023-10-20 10:07 ` [PATCH v2 6/7] app/testpmd: extract event handling to event.c Chengwen Feng
2023-11-01 4:09 ` lihuisong (C)
2023-10-20 10:07 ` [PATCH v2 7/7] doc: testpmd support event handling section Chengwen Feng
2023-11-06 9:28 ` lihuisong (C)
2023-11-06 12:39 ` fengchengwen
2023-11-08 3:02 ` lihuisong (C)
2023-11-06 1:35 ` [PATCH v2 0/7] fix race-condition of proactive error handling mode fengchengwen
2023-11-06 13:11 ` [PATCH v3 " Chengwen Feng
2023-11-06 13:11 ` [PATCH v3 1/7] ethdev: " Chengwen Feng
2023-11-06 13:11 ` [PATCH v3 2/7] net/hns3: replace fp ops config function Chengwen Feng
2023-11-06 13:11 ` [PATCH v3 3/7] net/bnxt: fix race-condition when report error recovery Chengwen Feng
2023-11-06 13:11 ` [PATCH v3 4/7] net/bnxt: use fp ops setup function Chengwen Feng
2023-11-06 13:11 ` [PATCH v3 5/7] app/testpmd: add error recovery usage demo Chengwen Feng
2023-11-06 13:11 ` [PATCH v3 6/7] app/testpmd: extract event handling to event.c Chengwen Feng
2023-11-06 13:11 ` [PATCH v3 7/7] doc: testpmd support event handling section Chengwen Feng
2023-11-08 3:03 ` lihuisong (C)
2023-12-05 2:30 ` [PATCH v3 0/7] fix race-condition of proactive error handling mode fengchengwen
2024-01-15 1:44 ` fengchengwen
2024-01-29 1:16 ` fengchengwen
2024-02-18 3:41 ` fengchengwen
2024-05-08 9:22 ` fengchengwen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=95edd6ca-fe1f-fd7c-719f-0a9e6d7c45b5@huawei.com \
--to=fengchengwen@huawei.com \
--cc=Honnappa.Nagarahalli@arm.com \
--cc=ajit.khaparde@broadcom.com \
--cc=andrew.rybchenko@oktetlabs.ru \
--cc=dev@dpdk.org \
--cc=ferruh.yigit@amd.com \
--cc=kalesh-anakkur.purayil@broadcom.com \
--cc=konstantin.v.ananyev@yandex.ru \
--cc=nd@arm.com \
--cc=thomas@monjalon.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).