From: "Zhao1, Wei" <wei.zhao1@intel.com>
To: "Wu, Jingjing" <jingjing.wu@intel.com>, "dev@dpdk.org" <dev@dpdk.org>
Subject: Re: [dpdk-dev] [PATCH v3 1/2] net/i40e: queue region set and flush
Date: Mon, 25 Sep 2017 05:55:41 +0000 [thread overview]
Message-ID: <A2573D2ACFCADC41BB3BE09C6DE313CA07C69139@PGSMSX103.gar.corp.intel.com> (raw)
In-Reply-To: <9BB6961774997848B5B42BEC655768F810E7BE31@SHSMSX103.ccr.corp.intel.com>
Hi, jingjing
> -----Original Message-----
> From: Wu, Jingjing
> Sent: Monday, September 25, 2017 12:02 AM
> To: Zhao1, Wei <wei.zhao1@intel.com>; dev@dpdk.org
> Cc: Zhao1, Wei <wei.zhao1@intel.com>
> Subject: RE: [dpdk-dev] [PATCH v3 1/2] net/i40e: queue region set and flush
>
>
>
> > -----Original Message-----
> > From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Wei Zhao
> > Sent: Friday, September 15, 2017 11:13 AM
> > To: dev@dpdk.org
> > Cc: Zhao1, Wei <wei.zhao1@intel.com>
> > Subject: [dpdk-dev] [PATCH v3 1/2] net/i40e: queue region set and
> > flush
> >
> > This feature enable queue regions configuration for RSS in PF/VF, so
> > that different traffic classes or different packet classification
> > types can be separated to different queues in different queue
> > regions.This patch can set queue region range, it include queue number
> > in a region and the index of first queue.
> > This patch enable mapping between different priorities (UP) and
> > different traffic classes.It also enable mapping between a region
> > index and a sepcific flowtype(PCTYPE).It also provide the solution of
> > flush all configuration about queue region the above described.
> >
> > Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
> > ---
> > drivers/net/i40e/i40e_ethdev.c | 19 +-
> > drivers/net/i40e/i40e_ethdev.h | 30 ++
> > drivers/net/i40e/rte_pmd_i40e.c | 482
> > ++++++++++++++++++++++++++++++
> > drivers/net/i40e/rte_pmd_i40e.h | 38 +++
> > drivers/net/i40e/rte_pmd_i40e_version.map | 1 +
> > 5 files changed, 566 insertions(+), 4 deletions(-)
> >
> > diff --git a/drivers/net/i40e/i40e_ethdev.c
> > b/drivers/net/i40e/i40e_ethdev.c index 8e0580c..1663fc0 100644
> > --- a/drivers/net/i40e/i40e_ethdev.c
> > +++ b/drivers/net/i40e/i40e_ethdev.c
> > @@ -137,10 +137,6 @@
> > #define I40E_PRTTSYN_TSYNTYPE 0x0e000000
> > #define I40E_CYCLECOUNTER_MASK 0xffffffffffffffffULL
> >
> > -#define I40E_MAX_PERCENT 100
> > -#define I40E_DEFAULT_DCB_APP_NUM 1
> > -#define I40E_DEFAULT_DCB_APP_PRIO 3
> > -
> > /**
> > * Below are values for writing un-exposed registers suggested
> > * by silicon experts
> > @@ -1034,6 +1030,15 @@ i40e_init_fdir_filter_list(struct rte_eth_dev
> *dev)
> > return ret;
> > }
> >
> > +static void
> > +i40e_init_queue_region_conf(struct rte_eth_dev *dev) {
> > + struct i40e_pf *pf = I40E_DEV_PRIVATE_TO_PF(dev->data-
> >dev_private);
> > + struct i40e_queue_region_info *info = &pf->queue_region;
> > +
> > + memset(info, 0, sizeof(struct i40e_queue_region_info)); }
> > +
> > static int
> > eth_i40e_dev_init(struct rte_eth_dev *dev) { @@ -1309,6 +1314,9 @@
> > eth_i40e_dev_init(struct rte_eth_dev *dev)
> > if (ret < 0)
> > goto err_init_fdir_filter_list;
> >
> > + /* initialize queue region configuration */
> > + i40e_init_queue_region_conf(dev);
> > +
> If this func i40e_init_queue_region_conf is only called here, then it is Not
> necessary? Because all the pf struct has been zeroed at probe time.
>
> > return 0;
> >
> > err_init_fdir_filter_list:
> > @@ -1464,6 +1472,9 @@ eth_i40e_dev_uninit(struct rte_eth_dev *dev)
> > /* Remove all Traffic Manager configuration */
> > i40e_tm_conf_uninit(dev);
> >
> > + /* Remove all the queue region configuration */
> > + i40e_flush_region_all_conf(hw, pf, 0);
> > +
> > return 0;
> > }
> >
> > diff --git a/drivers/net/i40e/i40e_ethdev.h
> > b/drivers/net/i40e/i40e_ethdev.h index ad80f0f..d612886 100644
> > --- a/drivers/net/i40e/i40e_ethdev.h
> > +++ b/drivers/net/i40e/i40e_ethdev.h
> > @@ -260,6 +260,16 @@ enum i40e_flxpld_layer_idx { #define
> > I40E_QOS_BW_WEIGHT_MIN 1
> > /* The max bandwidth weight is 127. */ #define
> > I40E_QOS_BW_WEIGHT_MAX 127
> > +/* The max queue region index is 7. */ #define
> I40E_REGION_MAX_INDEX
> > +7
> > +/* The max queue region userpriority is 7. */ #define
> > +I40E_REGION_USERPRIORITY_MAX_INDEX 7
> You can reuse I40E_MAX_USER_PRIORITY.
>
> > +/* The max pctype index is 63. */
> > +#define I40E_REGION_PCTYPE_MAX_INDEX 63
> > +
> You can use I40E_FILTER_PCTYPE_MAX
>
> > +#define I40E_MAX_PERCENT 100
> > +#define I40E_DEFAULT_DCB_APP_NUM 1
> > +#define I40E_DEFAULT_DCB_APP_PRIO 3
> >
> > /**
> > * The overhead from MTU to max frame size.
> > @@ -541,6 +551,22 @@ struct i40e_ethertype_rule {
> > struct rte_hash *hash_table;
> > };
> >
> > +/* queue region info */
> > +struct i40e_region_info {
> > + uint8_t region_id;
> > + uint8_t queue_start_index;
> > + uint8_t queue_num;
> > + uint8_t user_priority_num;
> > + uint8_t user_priority[I40E_MAX_USER_PRIORITY];
> Please comment what is the meaning of this array?
>
> > + uint8_t flowtype_num;
> > + uint8_t hw_flowtype[I40E_FILTER_PCTYPE_MAX];
> The same, please comment it.
>
> > +};
> > +
> > +struct i40e_queue_region_info {
> > + uint16_t queue_region_number;
> > + struct i40e_region_info region[I40E_REGION_MAX_INDEX + 1]; };
> > +
> > /* Tunnel filter number HW supports */ #define
> > I40E_MAX_TUNNEL_FILTER_NUM 400
> >
> > @@ -776,6 +802,7 @@ struct i40e_pf {
> > struct i40e_fdir_info fdir; /* flow director info */
> > struct i40e_ethertype_rule ethertype; /* Ethertype filter rule */
> > struct i40e_tunnel_rule tunnel; /* Tunnel filter rule */
> > + struct i40e_queue_region_info queue_region; /* queue region info
> */
> > struct i40e_fc_conf fc_conf; /* Flow control conf */
> > struct i40e_mirror_rule_list mirror_list;
> > uint16_t nb_mirror_rule; /* The number of mirror rules */
> > @@ -1003,6 +1030,9 @@ void i40e_check_write_reg(struct i40e_hw *hw,
> > uint32_t addr, uint32_t val); int i40e_tm_ops_get(struct rte_eth_dev
> > *dev, void *ops); void i40e_tm_conf_init(struct rte_eth_dev *dev);
> > void i40e_tm_conf_uninit(struct rte_eth_dev *dev);
> > +int i40e_flush_region_all_conf(struct i40e_hw *hw,
> > + struct i40e_pf *pf, uint16_t on);
> > +
> >
> > #define I40E_DEV_TO_PCI(eth_dev) \
> > RTE_DEV_TO_PCI((eth_dev)->device)
> > diff --git a/drivers/net/i40e/rte_pmd_i40e.c
> > b/drivers/net/i40e/rte_pmd_i40e.c index d69a472..9a75f21 100644
> > --- a/drivers/net/i40e/rte_pmd_i40e.c
> > +++ b/drivers/net/i40e/rte_pmd_i40e.c
> > @@ -35,6 +35,7 @@
> > #include <rte_tailq.h>
> >
> > #include "base/i40e_prototype.h"
> > +#include "base/i40e_dcb.h"
> > #include "i40e_ethdev.h"
> > #include "i40e_pf.h"
> > #include "i40e_rxtx.h"
> > @@ -2161,3 +2162,484 @@ rte_pmd_i40e_add_vf_mac_addr(uint8_t port,
> > uint16_t vf_id,
> >
> > return 0;
> > }
> > +
> > +static int
> > +i40e_vsi_update_queue_region_mapping(struct i40e_hw *hw,
> > + struct i40e_pf *pf)
> > +{
> > + uint16_t i;
> > + struct i40e_vsi *vsi = pf->main_vsi;
> > + uint16_t queue_offset, bsf, tc_index;
> > + struct i40e_vsi_context ctxt;
> > + struct i40e_aqc_vsi_properties_data *vsi_info;
> > + struct i40e_queue_region_info *region_info =
> > + &pf->queue_region;
> > + uint32_t ret = -EINVAL;
> > +
> > + if (!region_info->queue_region_number) {
> > + PMD_INIT_LOG(ERR, "there is no that region id been set
> before");
> > + return ret;
> > + }
> > +
> > + memset(&ctxt, 0, sizeof(struct i40e_vsi_context));
> > +
> > + /* Update Queue Pairs Mapping for currently enabled UPs */
> > + ctxt.seid = vsi->seid;
> > + ctxt.pf_num = hw->pf_id;
> > + ctxt.vf_num = 0;
> > + ctxt.uplink_seid = vsi->uplink_seid;
> > + ctxt.info = vsi->info;
> > + vsi_info = &ctxt.info;
> > +
> Please use the vsi_info stored in i40e_vsi to avoid missing parameters.
>
> > + memset(vsi_info->tc_mapping, 0, sizeof(uint16_t) * 8);
> > + memset(vsi_info->queue_mapping, 0, sizeof(uint16_t) * 16);
> > +
> Ctxt has been zeroed, no need to memset tc_mapping and queue_mapping
> again.
> > + /**
> > + * Configure queue region and queue mapping parameters,
> > + * for enabled queue region, allocate queues to this region.
> > + */
> > +
> > + for (i = 0; i < region_info->queue_region_number; i++) {
> > + tc_index = region_info->region[i].region_id;
> > + bsf = rte_bsf32(region_info->region[i].queue_num);
> > + queue_offset = region_info->region[i].queue_start_index;
> > + vsi_info->tc_mapping[tc_index] = rte_cpu_to_le_16(
> > + (queue_offset <<
> I40E_AQ_VSI_TC_QUE_OFFSET_SHIFT) |
> > + (bsf <<
> I40E_AQ_VSI_TC_QUE_NUMBER_SHIFT));
> > + }
> > +
> > + /* Associate queue number with VSI, Keep vsi->nb_qps unchanged
> */
> > + if (vsi->type == I40E_VSI_SRIOV) {
> Vsi is main vsi, it is impossible that the type to be SRIOV. If you want to
> configure Queue mapping on sriov VSI, you need to scan all the SRIOV VSIs.
>
> > + vsi_info->mapping_flags |=
> > +
> rte_cpu_to_le_16(I40E_AQ_VSI_QUE_MAP_NONCONTIG);
> > + for (i = 0; i < vsi->nb_qps; i++)
> > + vsi_info->queue_mapping[i] =
> > + rte_cpu_to_le_16(vsi->base_queue + i);
> > + } else {
> > + vsi_info->mapping_flags |=
> > +
> rte_cpu_to_le_16(I40E_AQ_VSI_QUE_MAP_CONTIG);
> > + vsi_info->queue_mapping[0] = rte_cpu_to_le_16(vsi-
> >base_queue);
> > + }
> > + vsi_info->valid_sections |=
> > +
> rte_cpu_to_le_16(I40E_AQ_VSI_PROP_QUEUE_MAP_VALID);
> > +
> > + /* Update the VSI after updating the VSI queue-mapping
> information */
> > + ret = i40e_aq_update_vsi_params(hw, &ctxt, NULL);
> > + if (ret) {
> > + PMD_INIT_LOG(ERR, "Failed to configure queue region "
> PMD_INIT_LOG -> PMD_DRV_LOG
> > + "mapping = %d ", hw->aq.asq_last_status);
> > + return ret;
> > + }
> > + /* update the local VSI info with updated queue map */
> > + (void)rte_memcpy(&vsi->info.tc_mapping, &ctxt.info.tc_mapping,
> > + sizeof(vsi->info.tc_mapping));
> > + (void)rte_memcpy(&vsi->info.queue_mapping,
> > + &ctxt.info.queue_mapping,
> > + sizeof(vsi->info.queue_mapping));
> > + vsi->info.mapping_flags = ctxt.info.mapping_flags;
> > + vsi->info.valid_sections = 0;
> > +
> > + return 0;
> > +}
> > +
> > +
> > +static int
> > +i40e_set_queue_region(struct i40e_pf *pf,
> > + struct rte_i40e_rss_region_conf *conf_ptr) {
> > + uint16_t tc_size_tb[7] = {1, 2, 4, 8, 16, 32, 64};
> > + uint16_t i;
> > + struct i40e_vsi *main_vsi = pf->main_vsi;
> > + struct i40e_queue_region_info *info = &pf->queue_region;
> > + uint32_t ret = -EINVAL;
> > +
> > + for (i = 0; i < I40E_REGION_MAX_INDEX; i++)
> > + if (conf_ptr->queue_num == tc_size_tb[i])
> > + break;
> > +
> > + if (i == I40E_REGION_MAX_INDEX) {
> > + printf("The region sizes should be any of the following "
> > + "values: 1, 2, 4, 8, 16, 32, 64 as long as the "
> > + "total number of queues do not exceed the VSI allocation");
> > + return ret;
> > + }
> > +
> If you just want to check if the queue_nume is one of {1, 2,4,8,16,32,64} You
> can use
>
> If (rte_is_power_of_2(queue_num) && queue_num <= 64)
>
>
> > + if (conf_ptr->region_id >= I40E_REGION_MAX_INDEX) {
> > + PMD_INIT_LOG(ERR, "the queue region max index is 7");
> > + return ret;
> > + }
> > +
> > + if ((conf_ptr->queue_start_index + conf_ptr->queue_num)
> > + > main_vsi->nb_used_qps) {
> > + PMD_INIT_LOG(ERR, "the queue index exceeds the VSI
> range");
> > + return ret;
> > + }
> > +
> > + if (info->queue_region_number) {
> > + for (i = 0; i < info->queue_region_number; i++)
> > + if (conf_ptr->region_id == info->region[i].region_id)
> > + break;
> > +
> > + if ((i == info->queue_region_number) &&
> > + (i <= I40E_REGION_MAX_INDEX)) {
> It is impossible that i > I40E_REGION_MAX_INDEX, right?
Yes, only support 8 queue region max.
>
> > + info->region[i].region_id = conf_ptr->region_id;
> > + info->region[i].queue_num = conf_ptr->queue_num;
> > + info->region[i].queue_start_index =
> > + conf_ptr->queue_start_index;
> > + info->queue_region_number++;
> > + } else {
> > + PMD_INIT_LOG(ERR, "queue region number "
> > + "exceeds maxnum 8 or the "
> > + "queue region id has "
> > + "been set before");
> Does it mean we can not change the set of one queue region whose id is set
> before?
No, FLUSH_OFF can clear all the config
>
> > + return ret;
> > + }
> > + } else {
> > + info->region[0].region_id = conf_ptr->region_id;
> > + info->region[0].queue_num = conf_ptr->queue_num;
> > + info->region[0].queue_start_index =
> > + conf_ptr->queue_start_index;
> > + info->queue_region_number++;
> > + }
> I think this part of code can be refined.
> > +
> > + return 0;
> > +}
> > +
> > +static int
> > +i40e_set_region_flowtype_pf(struct i40e_hw *hw,
> > + struct i40e_pf *pf, struct rte_i40e_rss_region_conf
> *conf_ptr) {
> > + uint32_t pfqf_hregion;
> > + uint32_t ret = -EINVAL;
> > + struct i40e_queue_region_info *info = &pf->queue_region;
> > + uint16_t i, j, index, flowtype_set = 0;
> > + uint16_t region_index, flowtype_index;
> > +
> > + if (conf_ptr->region_id > I40E_PFQF_HREGION_MAX_INDEX) {
> > + PMD_INIT_LOG(ERR, "the queue region max index is 7");
> > + return ret;
> > + }
> > +
> > + if (conf_ptr->hw_flowtype >= I40E_FILTER_PCTYPE_MAX) {
> > + PMD_INIT_LOG(ERR, "the hw_flowtype or PCTYPE max index
> is 63");
> > + return ret;
> > + }
> > +
> > + if (info->queue_region_number) {
> > + for (i = 0; i < info->queue_region_number; i++)
> > + if (conf_ptr->region_id == info->region[i].region_id)
> > + break;
> > +
> > + if (i == info->queue_region_number) {
> > + PMD_INIT_LOG(ERR, "that region id has not "
> > + "been set before");
> > + return ret;
> > + }
> If info->queue_region_number==0, then i would be 0. So, the outer wrap if
> (info->queue_region_number) {} can be omit. The same at above func, I
> think this part of code can be refined.
Ok,change in v4
> > + region_index = i;
> > +
> > + for (i = 0; i < info->queue_region_number; i++) {
> > + for (j = 0; j < info->region[i].flowtype_num; j++) {
> > + if (conf_ptr->hw_flowtype ==
> > + info->region[i].hw_flowtype[j]) {
> > + flowtype_set = 1;
> > + break;
> > + }
> > + }
> > + }
> > +
> > + if (flowtype_set) {
> > + PMD_INIT_LOG(ERR, "that hw_flowtype "
> > + "has been set before");
> > + return ret;
> Is that right to return -EINVAL when it has been set. And it seems In this
> function, the error code is only -EINVAL, if so, why we define ret?
> > + }
> > + flowtype_index = info->region[region_index].flowtype_num;
> > + info->region[region_index].hw_flowtype[flowtype_index] =
> > + conf_ptr->hw_flowtype;
> > + info->region[region_index].flowtype_num++;
> > + } else {
> > + PMD_INIT_LOG(ERR, "there is no that region id been set
> before");
>
> Again, please use PMD_DRV_LOG. Because the func is not called at
> initialization time.
> Please replace it in all the patch.
> > + return ret;
> > + }
> > +
> > + index = conf_ptr->hw_flowtype >> 3;
> > + pfqf_hregion = i40e_read_rx_ctl(hw, I40E_PFQF_HREGION(index));
> > +
> > + if ((conf_ptr->hw_flowtype & 0x7) == 0) {
> > + pfqf_hregion |= conf_ptr->region_id <<
> > + I40E_PFQF_HREGION_REGION_0_SHIFT;
> > + pfqf_hregion |= 1 <<
> I40E_PFQF_HREGION_OVERRIDE_ENA_0_SHIFT;
> > + } else if ((conf_ptr->hw_flowtype & 0x7) == 1) {
> > + pfqf_hregion |= conf_ptr->region_id <<
> > + I40E_PFQF_HREGION_REGION_1_SHIFT;
> > + pfqf_hregion |= 1 <<
> I40E_PFQF_HREGION_OVERRIDE_ENA_1_SHIFT;
> > + } else if ((conf_ptr->hw_flowtype & 0x7) == 2) {
> > + pfqf_hregion |= conf_ptr->region_id <<
> > + I40E_PFQF_HREGION_REGION_2_SHIFT;
> > + pfqf_hregion |= 1 <<
> I40E_PFQF_HREGION_OVERRIDE_ENA_2_SHIFT;
> > + } else if ((conf_ptr->hw_flowtype & 0x7) == 3) {
> > + pfqf_hregion |= conf_ptr->region_id <<
> > + I40E_PFQF_HREGION_REGION_3_SHIFT;
> > + pfqf_hregion |= 1 <<
> I40E_PFQF_HREGION_OVERRIDE_ENA_3_SHIFT;
> > + } else if ((conf_ptr->hw_flowtype & 0x7) == 4) {
> > + pfqf_hregion |= conf_ptr->region_id <<
> > + I40E_PFQF_HREGION_REGION_4_SHIFT;
> > + pfqf_hregion |= 1 <<
> I40E_PFQF_HREGION_OVERRIDE_ENA_4_SHIFT;
> > + } else if ((conf_ptr->hw_flowtype & 0x7) == 5) {
> > + pfqf_hregion |= conf_ptr->region_id <<
> > + I40E_PFQF_HREGION_REGION_5_SHIFT;
> > + pfqf_hregion |= 1 <<
> I40E_PFQF_HREGION_OVERRIDE_ENA_5_SHIFT;
> > + } else if ((conf_ptr->hw_flowtype & 0x7) == 6) {
> > + pfqf_hregion |= conf_ptr->region_id <<
> > + I40E_PFQF_HREGION_REGION_6_SHIFT;
> > + pfqf_hregion |= 1 <<
> I40E_PFQF_HREGION_OVERRIDE_ENA_6_SHIFT;
> What is the (conf_ptr->hw_flowtype & 0x7) == 1/2/3/4/5/6 meanings?
> Please avoid coding with integer number. Can not understand the
> relationship with flow type.
> And the hw_flowtype is API to users, you need to make it clear enough.
>
> > + } else {
> > + pfqf_hregion |= conf_ptr->region_id <<
> > + I40E_PFQF_HREGION_REGION_7_SHIFT;
> > + pfqf_hregion |= 1 <<
> I40E_PFQF_HREGION_OVERRIDE_ENA_7_SHIFT;
> > + }
> > +
> > + i40e_write_rx_ctl(hw, I40E_PFQF_HREGION(index), pfqf_hregion);
> > +
> > + return 0;
> > +}
> > +
> > +static int
> > +i40e_set_up_region(struct i40e_pf *pf,
> > + struct rte_i40e_rss_region_conf *conf_ptr) {
> > + struct i40e_queue_region_info *info = &pf->queue_region;
> > + uint32_t ret = -EINVAL;
> > + uint16_t i, j, region_index, up_set = 0;
> > +
> > + if (conf_ptr->user_priority >
> I40E_REGION_USERPRIORITY_MAX_INDEX) {
> > + PMD_INIT_LOG(ERR, "the queue region max index is 7");
> > + return ret;
> > + }
> > +
> > + if (conf_ptr->region_id >= I40E_REGION_MAX_INDEX) {
> > + PMD_INIT_LOG(ERR, "the region_id max index is 7");
> > + return ret;
> > + }
> > +
> > + if (info->queue_region_number) {
> > + for (i = 0; i < info->queue_region_number; i++)
> > + if (conf_ptr->region_id == info->region[i].region_id)
> > + break;
> > +
> > + if (i == info->queue_region_number) {
> > + PMD_INIT_LOG(ERR, "that region id "
> > + "has not been set before");
> > + return ret;
> > + }
> > + region_index = i;
> > +
> > + for (i = 0; i < info->queue_region_number; i++) {
> > + for (j = 0; j <
> > + info->region[i].user_priority_num; j++) {
> > + if (info->region[i].user_priority[j] ==
> > + conf_ptr->user_priority) {
> > + up_set = 1;
> > + break;
> > + }
> > + }
> > + }
> > +
> > + if (up_set) {
> > + PMD_INIT_LOG(ERR, "that user priority "
> > + "has been set before");
> > + return ret;
> > + }
> > +
> > + j = info->region[region_index].user_priority_num;
> > + info->region[region_index].user_priority[j] =
> > + conf_ptr->user_priority;
> > + info->region[region_index].user_priority_num++;
> > + } else {
> > + PMD_INIT_LOG(ERR, "there is no that region id been set
> before");
> > + return ret;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static int
> > +i40e_queue_region_dcb_configure(struct i40e_hw *hw,
> > + struct i40e_pf *pf)
> > +{
> > + struct i40e_dcbx_config dcb_cfg_local;
> > + struct i40e_dcbx_config *dcb_cfg;
> > + struct i40e_queue_region_info *info = &pf->queue_region;
> > + struct i40e_dcbx_config *old_cfg = &hw->local_dcbx_config;
> > + uint32_t ret = -EINVAL;
> > + uint16_t i, j, prio_index, region_index;
> > + uint8_t tc_map, tc_bw, bw_lf;
> > +
> > + if (!info->queue_region_number) {
> > + PMD_INIT_LOG(ERR, "there is no that region id been set
> before");
> > + return ret;
> > + }
> > +
> > + dcb_cfg = &dcb_cfg_local;
> > + memset(dcb_cfg, 0, sizeof(struct i40e_dcbx_config));
> > +
> > + /* assume each tc has the same bw */
> > + tc_bw = I40E_MAX_PERCENT / info->queue_region_number;
> > + for (i = 0; i < info->queue_region_number; i++)
> > + dcb_cfg->etscfg.tcbwtable[i] = tc_bw;
> > + /* to ensure the sum of tcbw is equal to 100 */
> > + bw_lf = I40E_MAX_PERCENT % info->queue_region_number;
> > + for (i = 0; i < bw_lf; i++)
> > + dcb_cfg->etscfg.tcbwtable[i]++;
> > +
> > + /* assume each tc has the same Transmission Selection Algorithm */
> > + for (i = 0; i < info->queue_region_number; i++)
> > + dcb_cfg->etscfg.tsatable[i] = I40E_IEEE_TSA_ETS;
> > +
> > + for (i = 0; i < info->queue_region_number; i++) {
> > + for (j = 0; j < info->region[i].user_priority_num; j++) {
> > + prio_index = info->region[i].user_priority[j];
> > + region_index = info->region[i].region_id;
> > + dcb_cfg->etscfg.prioritytable[prio_index] =
> > + region_index;
> > + }
> > + }
> > +
> > + /* FW needs one App to configure HW */
> > + dcb_cfg->numapps = I40E_DEFAULT_DCB_APP_NUM;
> > + dcb_cfg->app[0].selector = I40E_APP_SEL_ETHTYPE;
> > + dcb_cfg->app[0].priority = I40E_DEFAULT_DCB_APP_PRIO;
> > + dcb_cfg->app[0].protocolid = I40E_APP_PROTOID_FCOE;
> > +
> > + tc_map = RTE_LEN2MASK(info->queue_region_number, uint8_t);
> > +
> > + dcb_cfg->pfc.willing = 0;
> > + dcb_cfg->pfc.pfccap = I40E_MAX_TRAFFIC_CLASS;
> > + dcb_cfg->pfc.pfcenable = tc_map;
> > +
> > + /* Copy the new config to the current config */
> > + *old_cfg = *dcb_cfg;
> > + old_cfg->etsrec = old_cfg->etscfg;
> > + ret = i40e_set_dcb_config(hw);
> > +
> > + if (ret) {
> > + PMD_INIT_LOG(ERR, "Set queue region DCB Config failed,
> err"
> > + " %s aq_err %s",
> > + i40e_stat_str(hw, ret),
> > + i40e_aq_str(hw, hw->aq.asq_last_status));
> > + return ret;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static int
> > +i40e_queue_region_dcb_configure_default(struct i40e_hw *hw)
>
> Can i40e_dcb_init_configure do what this func did here?
>
> > +{
> > + uint16_t i;
> > + uint32_t ret = -EINVAL;
> > +
> > + memset(&hw->local_dcbx_config, 0,
> > + sizeof(struct i40e_dcbx_config));
> > + /* set dcb default configuration */
> > + hw->local_dcbx_config.etscfg.willing = 0;
> > + hw->local_dcbx_config.etscfg.maxtcs = 0;
> > + hw->local_dcbx_config.etscfg.tcbwtable[0] = 100;
> > + hw->local_dcbx_config.etscfg.tsatable[0] =
> > + I40E_IEEE_TSA_ETS;
> > + /* all UPs mapping to region 0 */
> > + for (i = 0; i < I40E_MAX_USER_PRIORITY; i++)
> > + hw->local_dcbx_config.etscfg.prioritytable[i] = 0;
> > + hw->local_dcbx_config.etsrec =
> > + hw->local_dcbx_config.etscfg;
> > + hw->local_dcbx_config.pfc.willing = 0;
> > + hw->local_dcbx_config.pfc.pfccap =
> > + I40E_MAX_TRAFFIC_CLASS;
> > + /* FW needs one App to configure HW */
> > + hw->local_dcbx_config.numapps = 1;
> > + hw->local_dcbx_config.app[0].selector =
> > + I40E_APP_SEL_ETHTYPE;
> > + hw->local_dcbx_config.app[0].priority = 3;
> > + hw->local_dcbx_config.app[0].protocolid =
> > + I40E_APP_PROTOID_FCOE;
> > + ret = i40e_set_dcb_config(hw);
> > + if (ret) {
> > + PMD_INIT_LOG(ERR,
> > + "default dcb config fails. err = %d, aq_err = %d.",
> > + ret, hw->aq.asq_last_status);
> > + return ret;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +int
> > +i40e_flush_region_all_conf(struct i40e_hw *hw, struct i40e_pf *pf,
> > + uint16_t on)
> > +{
> > + uint16_t i;
> > + struct i40e_queue_region_info *info = &pf->queue_region;
> > +
> > + if (on) {
> > + i40e_vsi_update_queue_region_mapping(hw, pf);
> > + i40e_queue_region_dcb_configure(hw, pf);
> Don't check all the return code?
>
> > + return 0;
> > + }
> > +
> > + info->queue_region_number = 1;
> > + info->region[0].queue_num = 64;
> > + info->region[0].queue_start_index = 0;
> > +
> > + i40e_vsi_update_queue_region_mapping(hw, pf);
> > + i40e_queue_region_dcb_configure_default(hw);
> > +
> > + for (i = 0; i < I40E_PFQF_HREGION_MAX_INDEX; i++)
> > + i40e_write_rx_ctl(hw, I40E_PFQF_HREGION(i), 0);
> > + memset(info, 0, sizeof(struct i40e_queue_region_info));
> > +
> > + return 0;
> > +}
> > +
> > +int rte_pmd_i40e_queue_region_conf(uint8_t port,
> > + struct rte_i40e_rss_region_conf *conf_ptr) {
> > + struct rte_eth_dev *dev = &rte_eth_devices[port];
> > + struct i40e_pf *pf = I40E_DEV_PRIVATE_TO_PF(dev->data-
> >dev_private);
> > + struct i40e_hw *hw = I40E_DEV_PRIVATE_TO_HW(dev->data-
> >dev_private);
> > + enum rte_pmd_i40e_queue_region_op op_type = conf_ptr->op;
> > + uint32_t ret;
> > +
> > + if (!is_i40e_supported(dev))
> > + return -ENOTSUP;
> > +
> > + switch (op_type) {
> > + case RTE_PMD_I40E_QUEUE_REGION_SET:
> > + ret = i40e_set_queue_region(pf, conf_ptr);
> > + break;
> > + case RTE_PMD_I40E_REGION_FLOWTYPE_PF_SET:
> > + ret = i40e_set_region_flowtype_pf(hw, pf, conf_ptr);
> > + break;
> > + case RTE_PMD_I40E_REGION_FLOWTYPE_VF_SET:
> > + ret = -EINVAL;
> > + break;
> If it is not supported, why to define this op?
>
> > + case RTE_PMD_I40E_UP_REGION_SET:
> > + ret = i40e_set_up_region(pf, conf_ptr);
> > + break;
> > + case RTE_PMD_I40E_REGION_ALL_FLUSH_ON:
> > + ret = i40e_flush_region_all_conf(hw, pf, 1);
> > + break;
> What is the FLUSH on meaning? Commit all configure to HW?
> If so, what makes me confused that:
> RTE_PMD_I40E_QUEUE_REGION_SET only touch the software stored in
> driver.
> But RTE_PMD_I40E_REGION_FLOWTYPE_PF_SET set the
> I40E_PFQF_HREGION register.
> Those behaviors are not consist.
>
> And FLUSH OFF means delete all?
>
> You need to add more comments.
>
> > + case RTE_PMD_I40E_REGION_ALL_FLUSH_OFF:
> > + ret = i40e_flush_region_all_conf(hw, pf, 0);
> > + break;
> > +
> > + default:
> > + PMD_DRV_LOG(WARNING, "op type (%d) not supported",
> > + op_type);
> > + ret = -EINVAL;
> > + break;
> > + }
> > +
> > + I40E_WRITE_FLUSH(hw);
> > +
> > + return ret;
> > +}
> > diff --git a/drivers/net/i40e/rte_pmd_i40e.h
> > b/drivers/net/i40e/rte_pmd_i40e.h index 155b7e8..a1329f4 100644
> > --- a/drivers/net/i40e/rte_pmd_i40e.h
> > +++ b/drivers/net/i40e/rte_pmd_i40e.h
> > @@ -91,6 +91,20 @@ enum rte_pmd_i40e_package_info {
> > RTE_PMD_I40E_PKG_INFO_MAX = 0xFFFFFFFF };
> >
> > +/**
> > + * Option types of queue region.
> > + */
> > +enum rte_pmd_i40e_queue_region_op {
> > + RTE_PMD_I40E_REGION_UNDEFINED = 0,
> > + RTE_PMD_I40E_QUEUE_REGION_SET, /**< add queue region
> set*/
> > + RTE_PMD_I40E_REGION_FLOWTYPE_PF_SET, /**< add pf region
> pctype set */
> > + RTE_PMD_I40E_REGION_FLOWTYPE_VF_SET, /**< add vf region
> pctype set */
> > + RTE_PMD_I40E_UP_REGION_SET, /**< add queue region pctype
> set */
> > + RTE_PMD_I40E_REGION_ALL_FLUSH_ON, /**< flush on all
> configuration */
> > + RTE_PMD_I40E_REGION_ALL_FLUSH_OFF, /**< flush off all
> configuration */
> > + RTE_PMD_I40E_QUEUE_REGION_OP_MAX
> > +};
> > +
> > #define RTE_PMD_I40E_DDP_NAME_SIZE 32
> >
> > /**
> > @@ -146,6 +160,18 @@ struct rte_pmd_i40e_ptype_mapping { };
> >
> > /**
> > + * Queue region information get from CLI.
> > + */
> > +struct rte_i40e_rss_region_conf {
> > + uint8_t region_id;
> > + uint8_t hw_flowtype;
> > + uint8_t queue_start_index;
> > + uint8_t queue_num;
> > + uint8_t user_priority;
> > + enum rte_pmd_i40e_queue_region_op op; };
> This is API struct, you need to comment them in detail
>
> Thanks
> Jingjing
next prev parent reply other threads:[~2017-09-25 5:55 UTC|newest]
Thread overview: 87+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-08-24 3:26 [dpdk-dev] [PATCH 0/2] net/i40e: API to configure queue regions for RSS Wei Zhao
2017-08-24 3:26 ` [dpdk-dev] [PATCH 1/2] net/i40e: queue region set and flush Wei Zhao
2017-08-31 16:18 ` Ferruh Yigit
2017-09-01 2:38 ` Zhao1, Wei
2017-09-06 9:11 ` Ferruh Yigit
2017-09-15 11:00 ` Ferruh Yigit
2017-09-20 3:20 ` Zhao1, Wei
2017-09-20 10:32 ` Ferruh Yigit
2017-09-18 3:38 ` Zhao1, Wei
2017-09-05 23:52 ` Chilikin, Andrey
2017-09-06 7:21 ` Zhao1, Wei
2017-08-24 3:26 ` [dpdk-dev] [PATCH 2/2] app/testpmd: add API for configuration of queue region Wei Zhao
2017-09-13 6:04 ` [dpdk-dev] [PATCH v2 0/2] net/i40e: API to configure queue regions for RSS Wei Zhao
2017-09-13 6:04 ` [dpdk-dev] [PATCH v2 1/2] net/i40e: queue region set and flush Wei Zhao
2017-09-13 6:04 ` [dpdk-dev] [PATCH v2 2/2] app/testpmd: add API for configuration of queue region Wei Zhao
2017-09-15 3:13 ` [dpdk-dev] [PATCH v3 0/2] net/i40e: API to configure queue regions for RSS Wei Zhao
2017-09-15 3:13 ` [dpdk-dev] [PATCH v3 1/2] net/i40e: queue region set and flush Wei Zhao
2017-09-20 10:36 ` Ferruh Yigit
2017-09-21 6:48 ` Zhao1, Wei
2017-09-21 7:10 ` Ferruh Yigit
2017-09-21 7:26 ` Zhao1, Wei
2017-09-21 15:45 ` Ferruh Yigit
2017-09-25 7:40 ` Zhao1, Wei
2017-09-25 9:31 ` Ferruh Yigit
2017-09-26 7:46 ` Zhao1, Wei
2017-09-26 8:54 ` Zhao1, Wei
2017-09-27 19:13 ` Ferruh Yigit
2017-09-28 2:40 ` Zhao1, Wei
2017-09-21 19:53 ` Chilikin, Andrey
2017-09-22 8:49 ` Zhao1, Wei
2017-09-22 20:13 ` Chilikin, Andrey
2017-09-25 2:55 ` Zhao1, Wei
2017-09-24 16:01 ` Wu, Jingjing
2017-09-25 3:26 ` Zhao1, Wei
2017-09-25 5:55 ` Zhao1, Wei [this message]
2017-09-15 3:13 ` [dpdk-dev] [PATCH v3 2/2] app/testpmd: add API for configuration of queue region Wei Zhao
2017-09-20 10:45 ` Ferruh Yigit
2017-09-25 9:25 ` Zhao1, Wei
2017-09-25 9:43 ` Ferruh Yigit
2017-09-26 5:30 ` Zhao1, Wei
2017-09-28 9:04 ` [dpdk-dev] [PATCH v4 0/3] net/i40e: API to configure queue regions for RSS Wei Zhao
2017-09-28 9:04 ` [dpdk-dev] [PATCH v4 1/3] net/i40e: queue region set and flush Wei Zhao
2017-09-28 9:04 ` [dpdk-dev] [PATCH v4 2/3] app/testpmd: add API for configuration of queue region Wei Zhao
2017-09-28 9:04 ` [dpdk-dev] [PATCH v4 3/3] doc/testpmd_app_ug: add doc info for " Wei Zhao
2017-09-28 9:10 ` [dpdk-dev] [PATCH v4 0/3] net/i40e: API to configure queue regions for RSS Wei Zhao
2017-09-28 9:10 ` [dpdk-dev] [PATCH v4 1/3] net/i40e: queue region set and flush Wei Zhao
2017-09-28 9:10 ` [dpdk-dev] [PATCH v4 2/3] app/testpmd: add API for configuration of queue region Wei Zhao
2017-09-28 9:10 ` [dpdk-dev] [PATCH v4 3/3] doc/testpmd_app_ug: add doc info for " Wei Zhao
2017-09-29 2:56 ` [dpdk-dev] [PATCH v5 0/3] net/i40e: API to configure queue regions for RSS Wei Zhao
2017-09-29 2:56 ` [dpdk-dev] [PATCH v5 1/3] net/i40e: queue region set and flush Wei Zhao
2017-09-29 4:54 ` Wu, Jingjing
2017-09-29 8:27 ` Zhao1, Wei
2017-09-29 2:56 ` [dpdk-dev] [PATCH v5 2/3] app/testpmd: add API for configuration of queue region Wei Zhao
2017-09-29 5:04 ` Wu, Jingjing
2017-09-29 5:21 ` Zhao1, Wei
2017-09-29 2:56 ` [dpdk-dev] [PATCH v5 3/3] doc/testpmd_app_ug: add doc info for " Wei Zhao
2017-09-29 8:11 ` [dpdk-dev] [PATCH v6] net/i40e: API to configure queue regions for RSS Wei Zhao
2017-09-29 8:11 ` [dpdk-dev] [PATCH v6] app/testpmd: add API for configuration of queue region Wei Zhao
2017-09-29 8:11 ` [dpdk-dev] [PATCH v6] net/i40e: queue region set and flush Wei Zhao
2017-09-29 9:00 ` Wu, Jingjing
2017-09-29 9:16 ` [dpdk-dev] [PATCH v7 0/2] net/i40e: API to configure queue regions for RSS Wei Zhao
2017-09-29 9:16 ` [dpdk-dev] [PATCH v7 1/2] net/i40e: queue region set and flush Wei Zhao
2017-09-29 12:22 ` Wu, Jingjing
2017-10-10 1:45 ` Zhao1, Wei
2017-10-03 17:54 ` Ferruh Yigit
2017-10-10 6:11 ` Zhao1, Wei
2017-09-29 9:16 ` [dpdk-dev] [PATCH v7 2/2] app/testpmd: add API for configuration of queue region Wei Zhao
2017-09-29 14:29 ` Wu, Jingjing
2017-10-03 18:04 ` Ferruh Yigit
2017-10-10 1:46 ` Zhao1, Wei
2017-10-10 2:55 ` Zhao1, Wei
2017-10-10 3:01 ` Zhao1, Wei
2017-10-11 2:15 ` Ferruh Yigit
2017-09-29 10:15 ` [dpdk-dev] [PATCH v7 0/2] net/i40e: API to configure queue regions for RSS Peng, Yuan
2017-10-11 8:49 ` [dpdk-dev] [PATCH v8 " Wei Zhao
2017-10-11 8:49 ` [dpdk-dev] [PATCH v8 1/2] net/i40e: queue region set and flush Wei Zhao
2017-10-11 8:49 ` [dpdk-dev] [PATCH v8 2/2] app/testpmd: add API for configuration of queue region Wei Zhao
2017-10-11 8:55 ` [dpdk-dev] [PATCH v8 0/2] net/i40e: API to configure queue regions for RSS Wei Zhao
2017-10-11 8:55 ` [dpdk-dev] [PATCH v8 1/2] net/i40e: queue region set and flush Wei Zhao
2017-10-13 10:06 ` Chilikin, Andrey
2017-10-18 3:00 ` Zhao1, Wei
2017-10-18 13:00 ` Chilikin, Andrey
2017-10-19 2:18 ` Zhao1, Wei
2017-10-11 8:55 ` [dpdk-dev] [PATCH v8 2/2] app/testpmd: add API for configuration of queue region Wei Zhao
2017-10-11 11:29 ` [dpdk-dev] [PATCH v8 0/2] net/i40e: API to configure queue regions for RSS Peng, Yuan
2017-10-11 21:06 ` Ferruh Yigit
2017-10-13 1:52 ` Zhao1, Wei
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=A2573D2ACFCADC41BB3BE09C6DE313CA07C69139@PGSMSX103.gar.corp.intel.com \
--to=wei.zhao1@intel.com \
--cc=dev@dpdk.org \
--cc=jingjing.wu@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).