From: "Zhao1, Wei" <wei.zhao1@intel.com>
To: "Yigit, Ferruh" <ferruh.yigit@intel.com>, "dev@dpdk.org" <dev@dpdk.org>
Subject: Re: [dpdk-dev] [PATCH v7 1/2] net/i40e: queue region set and flush
Date: Tue, 10 Oct 2017 06:11:01 +0000 [thread overview]
Message-ID: <A2573D2ACFCADC41BB3BE09C6DE313CA07C6D433@PGSMSX103.gar.corp.intel.com> (raw)
In-Reply-To: <a041900a-8d0b-1b73-01ef-9632bfb1b922@intel.com>
> -----Original Message-----
> From: Yigit, Ferruh
> Sent: Wednesday, October 4, 2017 1:55 AM
> To: Zhao1, Wei <wei.zhao1@intel.com>; dev@dpdk.org
> Subject: Re: [dpdk-dev] [PATCH v7 1/2] net/i40e: queue region set and flush
>
> On 9/29/2017 10:16 AM, Wei Zhao wrote:
> > This feature enable queue regions configuration for RSS in PF, so that
> > different traffic classes or different packet classification types can
> > be separated to different queues in different queue regions.This patch
> > can set queue region range, it include queue number in a region and
> > the index of first queue.
> > This patch enable mapping between different priorities (UP) and
> > different traffic classes.It also enable mapping between a region
> > index and a sepcific flowtype(PCTYPE).It also provide the solution of
> > flush all configuration about queue region the above described.
> >
> > Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
> > ---
>
> <...>
>
> > @@ -541,6 +547,34 @@ struct i40e_ethertype_rule {
> > struct rte_hash *hash_table;
> > };
> >
> > +/* queue region info */
> > +struct i40e_region_info {
> > + /* the region id for this configuration */
> > + uint8_t region_id;
> > + /* the start queue index for this region */
> > + uint8_t queue_start_index;
> > + /* the total queue number of this queue region */
> > + uint8_t queue_num;
> > + /* the total number of user priority for this region */
> > + uint8_t user_priority_num;
> > + /* the packet's user priority for this region */
> > + uint8_t user_priority[I40E_MAX_USER_PRIORITY];
> > + /* the total number of flowtype for this region */
> > + uint8_t flowtype_num;
> > + /**
> > + * the pctype or hardware flowtype of packet,
> > + * the specific index for each type has been defined
> > + * in file i40e_type.h as enum i40e_filter_pctype.
> > + */
> > + uint8_t hw_flowtype[I40E_FILTER_PCTYPE_MAX];
> > +};
> > +
> > +struct i40e_queue_region_info {
>
> What do you think renaming:
> i40e_region_info -> i40e_queue_region_info i40e_queue_region_info ->
> i40e_queue_regions
Ok
>
> > + /* the total number of queue region for this port */
> > + uint16_t queue_region_number;
> > + struct i40e_region_info region[I40E_REGION_MAX_INDEX + 1]; };
> > +
> > /* Tunnel filter number HW supports */ #define
> > I40E_MAX_TUNNEL_FILTER_NUM 400
> >
>
> <...>
>
> > +static int
> > +i40e_queue_region_set_flowtype(struct i40e_pf *pf,
> > + struct rte_i40e_rss_region_conf *rss_region_conf) {
> > + int32_t ret = -EINVAL;
> > + struct i40e_queue_region_info *info = &pf->queue_region;
> > + uint16_t i, j;
> > + uint16_t region_index, flowtype_index;
> > +
> > + /**
>
> This is doxygen sytle comment, only nedeed for public headers.
Ok, I will change to this mode :
/* For the pctype or hardware flowtype of packet,
* the specific index for each type has been defined
* in file i40e_type.h as enum i40e_filter_pctype.
*/
>
> > + * For the pctype or hardware flowtype of packet,
> > + * the specific index for each type has been defined
> > + * in file i40e_type.h as enum i40e_filter_pctype.
> > + */
> > +
> <...>
>
> > + }
> > + }
> > +}
>
> Missing line.
Ok
>
> > +static int
> > +i40e_queue_region_set_user_priority(struct i40e_pf *pf,
> > + struct rte_i40e_rss_region_conf *rss_region_conf) {
> > + struct i40e_queue_region_info *info = &pf->queue_region;
> > + int32_t ret = -EINVAL;
> > + uint16_t i, j, region_index;
> > +
> <...>
>
> > +static int
> > +i40e_queue_region_display_all_info(struct i40e_pf *pf, uint16_t
> > +port_id) {
> > + uint16_t i, j;
> > + struct i40e_queue_region_info *info = &pf->queue_region;
> > + static const char *queue_region_info_stats_border = "-------";
> > +
> > + if (!info->queue_region_number)
> > + PMD_DRV_LOG(ERR, "there is no has been region set
> before");
> > +
> > + printf("\n %s All queue region info for port=%2d %s",
> > + queue_region_info_stats_border, port_id,
> > + queue_region_info_stats_border);
>
> printf ? Please use driver logging functions.
>
Ok, I will change to PMD_DRV_LOG()
> > + printf("\n queue_region_number: %-14u \n",
> > +info->queue_region_number);
> > +
> > + for (i = 0; i < info->queue_region_number; i++) {
> > + printf("\n region_id: %-14u queue_number: %-14u "
> > + "queue_start_index: %-14u \n",
> > + info->region[i].region_id,
> > + info->region[i].queue_num,
> > + info->region[i].queue_start_index);
> > +
> > + printf(" user_priority_num is %-14u :",
> > + info->region[i].user_priority_num);
> > + for (j = 0; j < info->region[i].user_priority_num; j++)
> > + printf(" %-14u ", info->region[i].user_priority[j]);
> > +
> > + printf("\n flowtype_num is %-14u :",
> > + info->region[i].flowtype_num);
> > + for (j = 0; j < info->region[i].flowtype_num; j++)
> > + printf(" %-14u ", info->region[i].hw_flowtype[j]);
> > + }
> > +
> > + printf("\n\n");
> > + return 0;
> > +}
> > +
> > +int rte_pmd_i40e_rss_queue_region_conf(uint16_t port_id,
> > + struct rte_i40e_rss_region_conf *rss_region_conf) {
> > + struct rte_eth_dev *dev = &rte_eth_devices[port_id];
> > + struct i40e_pf *pf = I40E_DEV_PRIVATE_TO_PF(dev->data-
> >dev_private);
> > + struct i40e_hw *hw = I40E_DEV_PRIVATE_TO_HW(dev->data-
> >dev_private);
> > + enum rte_pmd_i40e_queue_region_op op_type = rss_region_conf-
> >op;
> > + int32_t ret;
> > +
> > + RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
> > +
> > + if (!is_i40e_supported(dev))
> > + return -ENOTSUP;
> > +
> > + if (!(!i40e_queue_region_pf_check_rss(pf)))
> > + return -ENOTSUP;
> > +
> > + /**
> > + * This queue region feature only support pf by now. It should
> > + * be called after dev_start, and will be clear after dev_stop.
> > + * "RTE_PMD_I40E_RSS_QUEUE_REGION_ALL_FLUSH_ON"
> > + * is just an enable function which server for other configuration,
> > + * it is for all configuration about queue region from up layer,
> > + * at first will only keep in DPDK softwarestored in driver,
> > + * only after "FLUSH_ON", it commit all configuration to HW.
> > + * Because PMD had to set hardware configuration at a time, so
> > + * it will record all up layer command at first.
> > + * "RTE_PMD_I40E_RSS_QUEUE_REGION_ALL_FLUSH_OFF" is
> > + * just clean all configuration about queue region just now,
> > + * and restore all to DPDK i40e driver default
> > + * config when start up.
> > + */
> > +
> > + switch (op_type) {
> > + case RTE_PMD_I40E_QUEUE_REGION_SET:
> > + ret = i40e_queue_region_set_region(pf, rss_region_conf);
> > + break;
> > + case RTE_PMD_I40E_REGION_FLOWTYPE_SET:
> > + ret = i40e_queue_region_set_flowtype(pf, rss_region_conf);
> > + break;
> > + case RTE_PMD_I40E_USER_PRIORITY_REGION_SET:
> > + ret = i40e_queue_region_set_user_priority(pf,
> rss_region_conf);
> > + break;
> > + case RTE_PMD_I40E_RSS_QUEUE_REGION_ALL_FLUSH_ON:
> > + ret = i40e_flush_queue_region_all_conf(dev, hw, pf, 1);
> > + break;
> > + case RTE_PMD_I40E_RSS_QUEUE_REGION_ALL_FLUSH_OFF:
> > + ret = i40e_flush_queue_region_all_conf(dev, hw, pf, 0);
> > + break;
> > + case RTE_PMD_I40E_RSS_QUEUE_REGION_INFO_GET:
> > + ret = i40e_queue_region_display_all_info(pf, port_id);
>
> Displaying is not always very useful in API level.
> What do you think get fills the rss_region_conf with current device settings
> and return back to the caller?
Ok, it will not only print all region info, but also fill a struct like rss_region_conf.
With the CLI command "show port # queue-region..."
>
> > + break;
> > + default:
> > + PMD_DRV_LOG(WARNING, "op type (%d) not supported",
> > + op_type);
> > + ret = -EINVAL;
> > + }
> > +
> > + I40E_WRITE_FLUSH(hw);
> > +
> > + return ret;
> > +}
> > diff --git a/drivers/net/i40e/rte_pmd_i40e.h
> > b/drivers/net/i40e/rte_pmd_i40e.h index 155b7e8..2219318 100644
> > --- a/drivers/net/i40e/rte_pmd_i40e.h
> > +++ b/drivers/net/i40e/rte_pmd_i40e.h
> > @@ -91,6 +91,33 @@ enum rte_pmd_i40e_package_info {
> > RTE_PMD_I40E_PKG_INFO_MAX = 0xFFFFFFFF };
> >
> > +/**
> > + * Option types of queue region.
> > + */
> > +enum rte_pmd_i40e_queue_region_op {
> > + RTE_PMD_I40E_REGION_UNDEFINED,
> > + RTE_PMD_I40E_QUEUE_REGION_SET, /**< add queue region set
> */
> > + RTE_PMD_I40E_REGION_FLOWTYPE_SET, /**< add pf region
> pctype set */
> > + /*** add queue region user priority set */
> > + RTE_PMD_I40E_USER_PRIORITY_REGION_SET,
> > + /**
> > + * ALL configuration about queue region from up layer
> > + * at first will only keep in DPDK softwarestored in driver,
> > + * only after " FLUSH_ON ", it commit all configuration to HW.
> > + * Because PMD had to set hardware configuration at a time, so
> > + * it will record all up layer command at first.
> > + */
> > + RTE_PMD_I40E_RSS_QUEUE_REGION_ALL_FLUSH_ON,
> > + /**
> > + * "FLUSH_OFF " is just clean all configuration about queue
> > + * region just now, and restore all to DPDK i40e driver default
> > + * config when start up.
> > + */
> > + RTE_PMD_I40E_RSS_QUEUE_REGION_ALL_FLUSH_OFF,
> > + RTE_PMD_I40E_RSS_QUEUE_REGION_INFO_GET,
> > + RTE_PMD_I40E_QUEUE_REGION_OP_MAX
>
> These are in public header now.
> Can you please use same namespace for all ops.
> It can be "RTE_PMD_I40E_RSS_QUEUE_REGION_"
Ok
>
> > +};
> > +
> > #define RTE_PMD_I40E_DDP_NAME_SIZE 32
> >
> > /**
> > @@ -146,6 +173,27 @@ struct rte_pmd_i40e_ptype_mapping { };
> >
> > /**
> > + * Queue region related information.
> > + */
> > +struct rte_i40e_rss_region_conf {
>
> Can you please be consistant in using public names.
> There are:
> rss_region
> queue_region
> rss_queue_region
>
> Also there is confusion between using:
> rte_i40e_
> rte_pmd_i40e_
Ok
>
> > + /*** the region id for this configuration */
> > + uint8_t region_id;
> > + /** the pctype or hardware flowtype of packet,
> > + * the specific index for each type has been defined
> > + * in file i40e_type.h as enum i40e_filter_pctype.
> > + */
> > + uint8_t hw_flowtype;
> > + /*** the start queue index for this region */
> > + uint8_t queue_start_index;
> > + /*** the total queue number of this queue region */
> > + uint8_t queue_num;
> > + /*** the packet's user priority for this region */
> > + uint8_t user_priority;
> > + /*** Option types of queue region */
> > + enum rte_pmd_i40e_queue_region_op op; };
> > +
> > +/**
> > * Notify VF when PF link status changes.
> > *
> > * @param port
> > @@ -657,4 +705,16 @@ int
> rte_pmd_i40e_ptype_mapping_replace(uint8_t
> > port, int rte_pmd_i40e_add_vf_mac_addr(uint8_t port, uint16_t vf_id,
> > struct ether_addr *mac_addr);
> >
> > +/**
> > + * Do RSS queue region configuration for that port as
> > + * the command option type
> > + *
> > + * @param port
> > + * pointer id for that port device
>
> port id ?
Ok
>
> > + * @param conf_ptr
> > + * pointer to the struct that contain all the
> > + * region configuration parameters
> > + */
> > +int rte_pmd_i40e_rss_queue_region_conf(uint16_t port_id,
>
> By defining port_id uint16_t, this patches becomes dependent to the port_id
> update patchset, please clarify this in cover letter.
Ok
>
> > + struct rte_i40e_rss_region_conf *rss_region_conf);
> > #endif /* _PMD_I40E_H_ */
> > diff --git a/drivers/net/i40e/rte_pmd_i40e_version.map
> > b/drivers/net/i40e/rte_pmd_i40e_version.map
> > index ef8882b..29d6b74 100644
> > --- a/drivers/net/i40e/rte_pmd_i40e_version.map
> > +++ b/drivers/net/i40e/rte_pmd_i40e_version.map
> > @@ -50,5 +50,6 @@ DPDK_17.11 {
> > global:
> >
> > rte_pmd_i40e_add_vf_mac_addr;
> > + rte_pmd_i40e_rss_queue_region_conf;
> >
> > } DPDK_17.08;
> >
next prev parent reply other threads:[~2017-10-10 6:11 UTC|newest]
Thread overview: 87+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-08-24 3:26 [dpdk-dev] [PATCH 0/2] net/i40e: API to configure queue regions for RSS Wei Zhao
2017-08-24 3:26 ` [dpdk-dev] [PATCH 1/2] net/i40e: queue region set and flush Wei Zhao
2017-08-31 16:18 ` Ferruh Yigit
2017-09-01 2:38 ` Zhao1, Wei
2017-09-06 9:11 ` Ferruh Yigit
2017-09-15 11:00 ` Ferruh Yigit
2017-09-20 3:20 ` Zhao1, Wei
2017-09-20 10:32 ` Ferruh Yigit
2017-09-18 3:38 ` Zhao1, Wei
2017-09-05 23:52 ` Chilikin, Andrey
2017-09-06 7:21 ` Zhao1, Wei
2017-08-24 3:26 ` [dpdk-dev] [PATCH 2/2] app/testpmd: add API for configuration of queue region Wei Zhao
2017-09-13 6:04 ` [dpdk-dev] [PATCH v2 0/2] net/i40e: API to configure queue regions for RSS Wei Zhao
2017-09-13 6:04 ` [dpdk-dev] [PATCH v2 1/2] net/i40e: queue region set and flush Wei Zhao
2017-09-13 6:04 ` [dpdk-dev] [PATCH v2 2/2] app/testpmd: add API for configuration of queue region Wei Zhao
2017-09-15 3:13 ` [dpdk-dev] [PATCH v3 0/2] net/i40e: API to configure queue regions for RSS Wei Zhao
2017-09-15 3:13 ` [dpdk-dev] [PATCH v3 1/2] net/i40e: queue region set and flush Wei Zhao
2017-09-20 10:36 ` Ferruh Yigit
2017-09-21 6:48 ` Zhao1, Wei
2017-09-21 7:10 ` Ferruh Yigit
2017-09-21 7:26 ` Zhao1, Wei
2017-09-21 15:45 ` Ferruh Yigit
2017-09-25 7:40 ` Zhao1, Wei
2017-09-25 9:31 ` Ferruh Yigit
2017-09-26 7:46 ` Zhao1, Wei
2017-09-26 8:54 ` Zhao1, Wei
2017-09-27 19:13 ` Ferruh Yigit
2017-09-28 2:40 ` Zhao1, Wei
2017-09-21 19:53 ` Chilikin, Andrey
2017-09-22 8:49 ` Zhao1, Wei
2017-09-22 20:13 ` Chilikin, Andrey
2017-09-25 2:55 ` Zhao1, Wei
2017-09-24 16:01 ` Wu, Jingjing
2017-09-25 3:26 ` Zhao1, Wei
2017-09-25 5:55 ` Zhao1, Wei
2017-09-15 3:13 ` [dpdk-dev] [PATCH v3 2/2] app/testpmd: add API for configuration of queue region Wei Zhao
2017-09-20 10:45 ` Ferruh Yigit
2017-09-25 9:25 ` Zhao1, Wei
2017-09-25 9:43 ` Ferruh Yigit
2017-09-26 5:30 ` Zhao1, Wei
2017-09-28 9:04 ` [dpdk-dev] [PATCH v4 0/3] net/i40e: API to configure queue regions for RSS Wei Zhao
2017-09-28 9:04 ` [dpdk-dev] [PATCH v4 1/3] net/i40e: queue region set and flush Wei Zhao
2017-09-28 9:04 ` [dpdk-dev] [PATCH v4 2/3] app/testpmd: add API for configuration of queue region Wei Zhao
2017-09-28 9:04 ` [dpdk-dev] [PATCH v4 3/3] doc/testpmd_app_ug: add doc info for " Wei Zhao
2017-09-28 9:10 ` [dpdk-dev] [PATCH v4 0/3] net/i40e: API to configure queue regions for RSS Wei Zhao
2017-09-28 9:10 ` [dpdk-dev] [PATCH v4 1/3] net/i40e: queue region set and flush Wei Zhao
2017-09-28 9:10 ` [dpdk-dev] [PATCH v4 2/3] app/testpmd: add API for configuration of queue region Wei Zhao
2017-09-28 9:10 ` [dpdk-dev] [PATCH v4 3/3] doc/testpmd_app_ug: add doc info for " Wei Zhao
2017-09-29 2:56 ` [dpdk-dev] [PATCH v5 0/3] net/i40e: API to configure queue regions for RSS Wei Zhao
2017-09-29 2:56 ` [dpdk-dev] [PATCH v5 1/3] net/i40e: queue region set and flush Wei Zhao
2017-09-29 4:54 ` Wu, Jingjing
2017-09-29 8:27 ` Zhao1, Wei
2017-09-29 2:56 ` [dpdk-dev] [PATCH v5 2/3] app/testpmd: add API for configuration of queue region Wei Zhao
2017-09-29 5:04 ` Wu, Jingjing
2017-09-29 5:21 ` Zhao1, Wei
2017-09-29 2:56 ` [dpdk-dev] [PATCH v5 3/3] doc/testpmd_app_ug: add doc info for " Wei Zhao
2017-09-29 8:11 ` [dpdk-dev] [PATCH v6] net/i40e: API to configure queue regions for RSS Wei Zhao
2017-09-29 8:11 ` [dpdk-dev] [PATCH v6] app/testpmd: add API for configuration of queue region Wei Zhao
2017-09-29 8:11 ` [dpdk-dev] [PATCH v6] net/i40e: queue region set and flush Wei Zhao
2017-09-29 9:00 ` Wu, Jingjing
2017-09-29 9:16 ` [dpdk-dev] [PATCH v7 0/2] net/i40e: API to configure queue regions for RSS Wei Zhao
2017-09-29 9:16 ` [dpdk-dev] [PATCH v7 1/2] net/i40e: queue region set and flush Wei Zhao
2017-09-29 12:22 ` Wu, Jingjing
2017-10-10 1:45 ` Zhao1, Wei
2017-10-03 17:54 ` Ferruh Yigit
2017-10-10 6:11 ` Zhao1, Wei [this message]
2017-09-29 9:16 ` [dpdk-dev] [PATCH v7 2/2] app/testpmd: add API for configuration of queue region Wei Zhao
2017-09-29 14:29 ` Wu, Jingjing
2017-10-03 18:04 ` Ferruh Yigit
2017-10-10 1:46 ` Zhao1, Wei
2017-10-10 2:55 ` Zhao1, Wei
2017-10-10 3:01 ` Zhao1, Wei
2017-10-11 2:15 ` Ferruh Yigit
2017-09-29 10:15 ` [dpdk-dev] [PATCH v7 0/2] net/i40e: API to configure queue regions for RSS Peng, Yuan
2017-10-11 8:49 ` [dpdk-dev] [PATCH v8 " Wei Zhao
2017-10-11 8:49 ` [dpdk-dev] [PATCH v8 1/2] net/i40e: queue region set and flush Wei Zhao
2017-10-11 8:49 ` [dpdk-dev] [PATCH v8 2/2] app/testpmd: add API for configuration of queue region Wei Zhao
2017-10-11 8:55 ` [dpdk-dev] [PATCH v8 0/2] net/i40e: API to configure queue regions for RSS Wei Zhao
2017-10-11 8:55 ` [dpdk-dev] [PATCH v8 1/2] net/i40e: queue region set and flush Wei Zhao
2017-10-13 10:06 ` Chilikin, Andrey
2017-10-18 3:00 ` Zhao1, Wei
2017-10-18 13:00 ` Chilikin, Andrey
2017-10-19 2:18 ` Zhao1, Wei
2017-10-11 8:55 ` [dpdk-dev] [PATCH v8 2/2] app/testpmd: add API for configuration of queue region Wei Zhao
2017-10-11 11:29 ` [dpdk-dev] [PATCH v8 0/2] net/i40e: API to configure queue regions for RSS Peng, Yuan
2017-10-11 21:06 ` Ferruh Yigit
2017-10-13 1:52 ` Zhao1, Wei
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=A2573D2ACFCADC41BB3BE09C6DE313CA07C6D433@PGSMSX103.gar.corp.intel.com \
--to=wei.zhao1@intel.com \
--cc=dev@dpdk.org \
--cc=ferruh.yigit@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).