From: "Chilikin, Andrey" <andrey.chilikin@intel.com>
To: Olivier Matz <olivier.matz@6wind.com>
Cc: "Ananyev, Konstantin" <konstantin.ananyev@intel.com>,
"Richardson, Bruce" <bruce.richardson@intel.com>,
"dev@dpdk.org" <dev@dpdk.org>
Subject: Re: [dpdk-dev] [RFC 0/8] mbuf: structure reorganization
Date: Sun, 19 Feb 2017 19:04:58 +0000 [thread overview]
Message-ID: <AAC06825A3B29643AF5372F5E0DDF0536459B055@IRSMSX106.ger.corp.intel.com> (raw)
In-Reply-To: <20170216154619.GA115208@bricha3-MOBL3.ger.corp.intel.com>
While doing this fields reshuffling, any chance to put uint16_t vlan_tci_outer beside uint16_t vlan_tci? It will allow to treat QinQ tags as a single 32-bit tag, if needed, and use it for other tag/labels like MPLS, GRE, NSH which could be 20, 24, 32 bits wide.
/Andrey
> -----Original Message-----
> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Olivier Matz
> Sent: Tuesday, January 24, 2017 3:19 PM
> To: dev@dpdk.org
> Subject: [dpdk-dev] [RFC 0/8] mbuf: structure reorganization
>
> Based on discussion done in [1], this patchset reorganizes the mbuf.
>
> The main changes are:
> - reorder structure to increase vector performance on some non-ia
> platforms.
> - add a 64bits timestamp field in the 1st cache line
> - m->next, m->nb_segs, and m->refcnt are always initialized for mbufs
> in the pool, avoiding the need of setting m->next (located in the
> 2nd cache line) in the Rx path for mono-segment packets.
> - change port and nb_segs to 16 bits
> - move seqn in the 2nd cache line
>
> Things discussed but not done in the patchset:
> - move refcnt and nb_segs to the 2nd cache line: many drivers sets
> them in the Rx path, so it could introduce a performance regression, or
> it would require to change all the drivers, which is not an easy task.
> - remove the m->port field: too much impact on many examples and
> libraries,
> and some people highlighted they are using it.
> - moving m->next in the 1st cache line: there is not enough room, and having
> it set to NULL for unused mbuf should remove the need for it.
> - merge seqn and timestamp together in a union: we could imagine use cases
> were both are activated. There is no flag indicating the presence of seqn,
> so it looks preferable to keep them separated for now.
>
> I made some basic performance tests (ixgbe) and see no regression, but the
> patchset requires more testing.
>
> [1] http://dpdk.org/ml/archives/dev/2016-October/049338.html
>
>
> Jerin Jacob (1):
> mbuf: make rearm data address naturally aligned
>
> Olivier Matz (7):
> mbuf: make segment prefree function public
> mbuf: make raw free function public
> mbuf: set mbuf fields while in pool
> net: don't touch mbuf next or nb segs on Rx
> mbuf: use 2 bytes for port and nb segments
> mbuf: move sequence number in second cache line
> mbuf: add a timestamp field
>
> app/test-pmd/csumonly.c | 4 +-
> drivers/net/ena/ena_ethdev.c | 2 +-
> drivers/net/enic/enic_rxtx.c | 2 +-
> drivers/net/fm10k/fm10k_rxtx.c | 6 +-
> drivers/net/fm10k/fm10k_rxtx_vec.c | 9 +-
> drivers/net/i40e/i40e_rxtx_vec_common.h | 6 +-
> drivers/net/i40e/i40e_rxtx_vec_sse.c | 11 +-
> drivers/net/ixgbe/ixgbe_rxtx.c | 10 +-
> drivers/net/ixgbe/ixgbe_rxtx_vec_common.h | 6 +-
> drivers/net/ixgbe/ixgbe_rxtx_vec_neon.c | 9 --
> drivers/net/ixgbe/ixgbe_rxtx_vec_sse.c | 9 --
> drivers/net/mlx5/mlx5_rxtx.c | 11 +-
> drivers/net/mpipe/mpipe_tilegx.c | 3 +-
> drivers/net/null/rte_eth_null.c | 2 -
> drivers/net/virtio/virtio_rxtx.c | 3 -
> drivers/net/virtio/virtio_rxtx_simple.h | 6 +-
> .../linuxapp/eal/include/exec-env/rte_kni_common.h | 5 +-
> lib/librte_mbuf/rte_mbuf.c | 4 +
> lib/librte_mbuf/rte_mbuf.h | 114 ++++++++++++++++-----
> 19 files changed, 124 insertions(+), 98 deletions(-)
>
> --
> 2.8.1
next prev parent reply other threads:[~2017-02-19 19:05 UTC|newest]
Thread overview: 155+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-24 15:19 Olivier Matz
2017-01-24 15:19 ` [dpdk-dev] [RFC 1/8] mbuf: make segment prefree function public Olivier Matz
2017-01-24 15:19 ` [dpdk-dev] [RFC 2/8] mbuf: make raw free " Olivier Matz
2017-01-24 15:19 ` [dpdk-dev] [RFC 3/8] mbuf: set mbuf fields while in pool Olivier Matz
2017-01-24 15:50 ` Bruce Richardson
2017-02-28 14:51 ` Olivier Matz
2017-01-24 15:19 ` [dpdk-dev] [RFC 4/8] net: don't touch mbuf next or nb segs on Rx Olivier Matz
2017-01-24 15:19 ` [dpdk-dev] [RFC 5/8] mbuf: make rearm data address naturally aligned Olivier Matz
2017-01-24 15:19 ` [dpdk-dev] [RFC 6/8] mbuf: use 2 bytes for port and nb segments Olivier Matz
2017-01-24 15:19 ` [dpdk-dev] [RFC 7/8] mbuf: move sequence number in second cache line Olivier Matz
2017-01-24 15:19 ` [dpdk-dev] [RFC 8/8] mbuf: add a timestamp field Olivier Matz
2017-01-24 15:59 ` [dpdk-dev] [RFC 0/8] mbuf: structure reorganization Bruce Richardson
2017-01-24 16:16 ` Olivier MATZ
2017-02-06 18:41 ` Ananyev, Konstantin
2017-02-09 16:20 ` Morten Brørup
2017-02-09 16:56 ` Ananyev, Konstantin
2017-02-16 13:48 ` Olivier Matz
2017-02-16 15:46 ` Bruce Richardson
2017-02-16 16:14 ` Olivier Matz
2017-02-21 14:20 ` Morten Brørup
2017-02-21 14:28 ` Bruce Richardson
2017-02-21 15:04 ` Olivier MATZ
2017-02-21 15:18 ` Bruce Richardson
2017-02-21 15:18 ` Morten Brørup
2017-02-19 19:04 ` Chilikin, Andrey [this message]
2017-02-21 9:53 ` Olivier MATZ
2017-02-16 17:26 ` Jan Blunck
2017-02-17 10:51 ` Olivier Matz
2017-02-17 12:49 ` Nélio Laranjeiro
2017-02-17 13:51 ` Jan Blunck
2017-02-18 5:48 ` Andrew Rybchenko
2017-02-17 13:38 ` Jan Blunck
2017-02-17 14:17 ` Olivier Matz
2017-02-17 18:42 ` Ananyev, Konstantin
2017-02-21 9:53 ` Olivier MATZ
2017-02-21 10:28 ` Ananyev, Konstantin
2017-02-20 9:27 ` Jan Blunck
2017-02-21 9:54 ` Olivier MATZ
2017-02-21 16:12 ` Jan Blunck
2017-02-21 16:38 ` Bruce Richardson
2017-02-21 17:04 ` Jan Blunck
2017-02-21 17:26 ` Ananyev, Konstantin
2017-02-21 19:17 ` Jan Blunck
2017-02-21 20:30 ` Ananyev, Konstantin
2017-02-21 21:51 ` Morten Brørup
2017-02-24 14:11 ` Olivier Matz
2017-02-24 14:00 ` Olivier Matz
2017-02-24 14:21 ` Bruce Richardson
2017-02-28 8:55 ` Jan Blunck
2017-02-28 9:05 ` Ananyev, Konstantin
2017-02-28 9:23 ` Olivier Matz
2017-02-28 9:33 ` Jan Blunck
2017-02-28 10:29 ` Ananyev, Konstantin
2017-02-28 10:50 ` Olivier Matz
2017-02-28 11:48 ` Ananyev, Konstantin
2017-02-28 12:28 ` Olivier Matz
2017-02-28 22:53 ` Ananyev, Konstantin
2017-03-02 16:46 ` Olivier Matz
2017-03-08 11:11 ` Ananyev, Konstantin
2017-03-20 9:00 ` Olivier Matz
2017-03-22 17:42 ` Ananyev, Konstantin
2017-03-24 8:35 ` Jerin Jacob
2017-03-24 13:35 ` Olivier Matz
2017-02-28 9:25 ` Jan Blunck
2017-02-19 23:45 ` Ananyev, Konstantin
2017-02-21 9:22 ` Morten Brørup
2017-02-21 9:54 ` Olivier MATZ
2017-03-08 9:41 ` [dpdk-dev] [PATCH 0/9] " Olivier Matz
2017-03-08 9:41 ` [dpdk-dev] [PATCH 1/9] mbuf: make segment prefree function public Olivier Matz
2017-03-08 9:41 ` [dpdk-dev] [PATCH 2/9] mbuf: make raw free " Olivier Matz
2017-03-08 9:41 ` [dpdk-dev] [PATCH 3/9] mbuf: set mbuf fields while in pool Olivier Matz
2017-03-31 11:21 ` Bruce Richardson
2017-03-31 11:51 ` Ananyev, Konstantin
2017-03-08 9:41 ` [dpdk-dev] [PATCH 4/9] drivers/net: don't touch mbuf next or nb segs on Rx Olivier Matz
2017-03-08 9:41 ` [dpdk-dev] [PATCH 5/9] mbuf: make rearm data address naturally aligned Olivier Matz
2017-03-08 9:41 ` [dpdk-dev] [PATCH 6/9] mbuf: use 2 bytes for port and nb segments Olivier Matz
2017-03-08 9:41 ` [dpdk-dev] [PATCH 7/9] mbuf: move sequence number in second cache line Olivier Matz
2017-03-08 9:42 ` [dpdk-dev] [PATCH 8/9] mbuf: add a timestamp field Olivier Matz
2017-04-04 10:29 ` [dpdk-dev] [PATCH 0/2] reduce writes to mbuf in ixgbe vRX Konstantin Ananyev
2017-04-07 15:13 ` Ferruh Yigit
2017-04-07 15:44 ` Ferruh Yigit
2017-04-09 22:56 ` Ananyev, Konstantin
2017-04-04 10:29 ` [dpdk-dev] [PATCH 1/2] net/ixgbe: eliminate mbuf write on rearm Konstantin Ananyev
2017-04-10 15:59 ` [dpdk-dev] [PATCH v2 0/2] reduce writes to mbuf in ixgbe vRX Konstantin Ananyev
2017-04-10 16:17 ` Ferruh Yigit
2017-04-10 15:59 ` [dpdk-dev] [PATCH v2 1/2] net/ixgbe: eliminate mbuf write on rearm Konstantin Ananyev
2017-04-10 15:59 ` [dpdk-dev] [PATCH v2 2/2] net/ixgbe: remove option to disable offload flags Konstantin Ananyev
2017-04-04 10:29 ` [dpdk-dev] [PATCH " Konstantin Ananyev
2017-03-08 9:42 ` [dpdk-dev] [PATCH 9/9] mbuf: reorder VLAN tci and buffer len fields Olivier Matz
2017-03-29 15:56 ` [dpdk-dev] [PATCH 0/9] mbuf: structure reorganization Olivier Matz
2017-03-29 16:03 ` Morten Brørup
2017-03-29 20:09 ` Bruce Richardson
2017-03-30 9:31 ` Bruce Richardson
2017-03-30 12:02 ` Olivier Matz
2017-03-30 12:23 ` Bruce Richardson
2017-03-30 16:45 ` Ananyev, Konstantin
2017-03-30 16:47 ` Ananyev, Konstantin
2017-03-30 18:06 ` Ananyev, Konstantin
2017-03-31 8:41 ` Olivier Matz
2017-03-31 9:58 ` Ananyev, Konstantin
2017-03-31 1:00 ` Ananyev, Konstantin
2017-03-31 7:21 ` Morten Brørup
2017-03-31 8:26 ` Olivier Matz
2017-03-31 8:41 ` Bruce Richardson
2017-03-31 8:59 ` Olivier Matz
2017-03-31 9:18 ` Ananyev, Konstantin
2017-03-31 9:36 ` Olivier Matz
2017-04-03 16:15 ` Thomas Monjalon
2017-04-04 7:58 ` Olivier MATZ
2017-04-04 8:53 ` Bruce Richardson
2017-03-31 9:23 ` Bruce Richardson
2017-03-31 11:18 ` Nélio Laranjeiro
2017-03-30 14:54 ` Andrew Rybchenko
2017-03-30 15:12 ` Jerin Jacob
2017-04-04 16:27 ` [dpdk-dev] [PATCH v2 0/8] " Olivier Matz
2017-04-04 16:28 ` [dpdk-dev] [PATCH v2 1/8] mbuf: make segment prefree function public Olivier Matz
2017-04-04 16:28 ` [dpdk-dev] [PATCH v2 2/8] mbuf: make raw free " Olivier Matz
2017-04-04 16:28 ` [dpdk-dev] [PATCH v2 3/8] mbuf: set mbuf fields while in pool Olivier Matz
2017-04-04 16:28 ` [dpdk-dev] [PATCH v2 4/8] drivers/net: don't touch mbuf next or nb segs on Rx Olivier Matz
2017-04-04 16:28 ` [dpdk-dev] [PATCH v2 5/8] mbuf: make rearm data address naturally aligned Olivier Matz
2017-04-04 16:28 ` [dpdk-dev] [PATCH v2 6/8] mbuf: use 2 bytes for port and nb segments Olivier Matz
2017-04-06 5:45 ` Yuanhan Liu
2017-04-18 13:03 ` Olivier MATZ
2017-07-04 7:54 ` Wang, Zhihong
2017-07-10 8:00 ` Olivier Matz
2017-07-10 8:15 ` Morten Brørup
2017-07-11 13:25 ` Wiles, Keith
2017-07-11 13:30 ` Morten Brørup
2017-07-11 15:05 ` Thomas Monjalon
2017-07-11 15:23 ` [dpdk-dev] [PATCH v2 6/8] mbuf: use 2 bytes for port and nbsegments Morten Brørup
2017-07-11 16:48 ` Wiles, Keith
2017-07-12 7:25 ` Morten Brørup
2017-07-12 9:02 ` Yang, Zhiyong
2017-07-12 9:50 ` [dpdk-dev] [PATCH v2 6/8] mbuf: use 2 bytes for port andnbsegments Morten Brørup
2017-07-12 15:35 ` Stephen Hemminger
2017-07-12 15:57 ` Morten Brørup
2017-07-12 16:23 ` Thomas Monjalon
2017-07-12 18:20 ` Wiles, Keith
2017-07-21 15:03 ` Bruce Richardson
2017-07-12 15:34 ` [dpdk-dev] [PATCH v2 6/8] mbuf: use 2 bytes for port and nbsegments Wiles, Keith
2017-07-11 13:34 ` [dpdk-dev] [PATCH v2 6/8] mbuf: use 2 bytes for port and nb segments Wiles, Keith
2017-07-11 13:46 ` Olivier MATZ
2017-04-04 16:28 ` [dpdk-dev] [PATCH v2 7/8] mbuf: move sequence number in second cache line Olivier Matz
2017-04-04 16:28 ` [dpdk-dev] [PATCH v2 8/8] mbuf: add a timestamp field Olivier Matz
2017-04-05 9:37 ` [dpdk-dev] [PATCH v2 0/8] mbuf: structure reorganization Thomas Monjalon
2017-04-05 9:46 ` Olivier MATZ
2017-04-05 9:48 ` Richardson, Bruce
2017-04-05 12:06 ` Ferruh Yigit
2017-04-14 13:10 ` Ferruh Yigit
2017-04-18 13:04 ` Olivier MATZ
2017-04-19 9:39 ` Thomas Monjalon
2017-04-19 12:28 ` Olivier MATZ
2017-04-19 12:56 ` Thomas Monjalon
2017-04-19 13:03 ` Ferruh Yigit
2017-04-19 13:12 ` Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=AAC06825A3B29643AF5372F5E0DDF0536459B055@IRSMSX106.ger.corp.intel.com \
--to=andrey.chilikin@intel.com \
--cc=bruce.richardson@intel.com \
--cc=dev@dpdk.org \
--cc=konstantin.ananyev@intel.com \
--cc=olivier.matz@6wind.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).