From: Matan Azrad <matan@mellanox.com>
To: "Ananyev, Konstantin" <konstantin.ananyev@intel.com>,
Thomas Monjalon <thomas@monjalon.net>,
Gaetan Rivet <gaetan.rivet@6wind.com>,
"Wu, Jingjing" <jingjing.wu@intel.com>
Cc: "dev@dpdk.org" <dev@dpdk.org>,
Neil Horman <nhorman@tuxdriver.com>,
"Richardson, Bruce" <bruce.richardson@intel.com>
Subject: Re: [dpdk-dev] [PATCH v2 2/6] ethdev: add port ownership
Date: Wed, 10 Jan 2018 16:58:48 +0000 [thread overview]
Message-ID: <AM6PR0502MB379755992EDDF002D06D9521D2110@AM6PR0502MB3797.eurprd05.prod.outlook.com> (raw)
In-Reply-To: <2601191342CEEE43887BDE71AB97725880E3B9D6@irsmsx105.ger.corp.intel.com>
Hi Konstantin
From: Ananyev, Konstantin, Wednesday, January 10, 2018 3:36 PM
> Hi Matan,
>
> Few comments from me below.
> BTW, do you plan to add ownership mandatory check in control path
> functions that change port configuration?
No.
> Konstantin
>
> > -----Original Message-----
> > From: Matan Azrad [mailto:matan@mellanox.com]
> > Sent: Sunday, January 7, 2018 9:46 AM
> > To: Thomas Monjalon <thomas@monjalon.net>; Gaetan Rivet
> > <gaetan.rivet@6wind.com>; Wu, Jingjing <jingjing.wu@intel.com>
> > Cc: dev@dpdk.org; Neil Horman <nhorman@tuxdriver.com>; Richardson,
> > Bruce <bruce.richardson@intel.com>; Ananyev, Konstantin
> > <konstantin.ananyev@intel.com>
> > Subject: [PATCH v2 2/6] ethdev: add port ownership
> >
> > The ownership of a port is implicit in DPDK.
> > Making it explicit is better from the next reasons:
> > 1. It will define well who is in charge of the port usage synchronization.
> > 2. A library could work on top of a port.
> > 3. A port can work on top of another port.
> >
> > Also in the fail-safe case, an issue has been met in testpmd.
> > We need to check that the application is not trying to use a port
> > which is already managed by fail-safe.
> >
> > A port owner is built from owner id(number) and owner name(string)
> > while the owner id must be unique to distinguish between two identical
> > entity instances and the owner name can be any name.
> > The name helps to logically recognize the owner by different DPDK
> > entities and allows easy debug.
> > Each DPDK entity can allocate an owner unique identifier and can use
> > it and its preferred name to owns valid ethdev ports.
> > Each DPDK entity can get any port owner status to decide if it can
> > manage the port or not.
> >
> > The mechanism is synchronized for both the primary process threads and
> > the secondary processes threads to allow secondary process entity to
> > be a port owner.
> >
> > Add a sinchronized ownership mechanism to DPDK Ethernet devices to
> > avoid multiple management of a device by different DPDK entities.
> >
> > The current ethdev internal port management is not affected by this
> > feature.
> >
> > Signed-off-by: Matan Azrad <matan@mellanox.com>
> > ---
> > doc/guides/prog_guide/poll_mode_drv.rst | 14 ++-
> > lib/librte_ether/rte_ethdev.c | 206
> ++++++++++++++++++++++++++++++--
> > lib/librte_ether/rte_ethdev.h | 89 ++++++++++++++
> > lib/librte_ether/rte_ethdev_version.map | 12 ++
> > 4 files changed, 311 insertions(+), 10 deletions(-)
>
>
> >
> >
> > diff --git a/lib/librte_ether/rte_ethdev.c
> > b/lib/librte_ether/rte_ethdev.c index 684e3e8..0e12452 100644
> > --- a/lib/librte_ether/rte_ethdev.c
> > +++ b/lib/librte_ether/rte_ethdev.c
> > @@ -70,7 +70,10 @@
> >
> > static const char *MZ_RTE_ETH_DEV_DATA = "rte_eth_dev_data"; struct
> > rte_eth_dev rte_eth_devices[RTE_MAX_ETHPORTS];
> > +/* ports data array stored in shared memory */
> > static struct rte_eth_dev_data *rte_eth_dev_data;
> > +/* next owner identifier stored in shared memory */ static uint16_t
> > +*rte_eth_next_owner_id;
> > static uint8_t eth_dev_last_created_port;
> >
> > /* spinlock for eth device callbacks */ @@ -82,6 +85,9 @@
> > /* spinlock for add/remove tx callbacks */ static rte_spinlock_t
> > rte_eth_tx_cb_lock = RTE_SPINLOCK_INITIALIZER;
> >
> > +/* spinlock for eth device ownership management stored in shared
> > +memory */ static rte_spinlock_t *rte_eth_dev_ownership_lock;
> > +
> > /* store statistics names and its offset in stats structure */
> > struct rte_eth_xstats_name_off {
> > char name[RTE_ETH_XSTATS_NAME_SIZE]; @@ -153,14 +159,18 @@
> enum { }
> >
> > static void
> > -rte_eth_dev_data_alloc(void)
> > +rte_eth_dev_share_data_alloc(void)
> > {
> > const unsigned flags = 0;
> > const struct rte_memzone *mz;
> > + const unsigned int data_size = RTE_MAX_ETHPORTS *
> > + sizeof(*rte_eth_dev_data);
> >
> > if (rte_eal_process_type() == RTE_PROC_PRIMARY) {
> > + /* Allocate shared memory for port data and ownership */
> > mz = rte_memzone_reserve(MZ_RTE_ETH_DEV_DATA,
> > - RTE_MAX_ETHPORTS *
> sizeof(*rte_eth_dev_data),
> > + data_size + sizeof(*rte_eth_next_owner_id)
> +
> > + sizeof(*rte_eth_dev_ownership_lock),
> > rte_socket_id(), flags);
> > } else
> > mz = rte_memzone_lookup(MZ_RTE_ETH_DEV_DATA);
> > @@ -168,9 +178,17 @@ enum {
> > rte_panic("Cannot allocate memzone for ethernet port
> data\n");
> >
> > rte_eth_dev_data = mz->addr;
> > - if (rte_eal_process_type() == RTE_PROC_PRIMARY)
> > - memset(rte_eth_dev_data, 0,
> > - RTE_MAX_ETHPORTS *
> sizeof(*rte_eth_dev_data));
> > + rte_eth_next_owner_id = (uint16_t *)((uintptr_t)mz->addr +
> > + data_size);
> > + rte_eth_dev_ownership_lock = (rte_spinlock_t *)
> > + ((uintptr_t)rte_eth_next_owner_id +
> > + sizeof(*rte_eth_next_owner_id));
>
>
> I think that might make rte_eth_dev_ownership_lock location not 4B
> aligned...
Where can I find the documentation about it?
> Why just not to put all data that you are trying to allocate as one chunck into
> the same struct:
> static struct {
> uint16_t next_owner_id;
> /* spinlock for eth device ownership management stored in shared
> memory */
> rte_spinlock_t dev_ownership_lock;
> rte_eth_dev_data *data;
> } rte_eth_dev_data;
> and allocate/use it everywhere?
> That would simplify allocation/management stuff.
>
I don't understand what exactly do you mean. ?
If you mean to group all in one struct like:
static struct {
uint16_t next_owner_id;
rte_spinlock_t dev_ownership_lock;
rte_eth_dev_data data[];
} rte_eth_dev_share_data;
Just to simplify the addresses calculation above,
It will change more code in ethdev relative to the old rte_eth_dev_data global array and will be more intrusive.
Stay it as is, focuses the change only here.
I can just move the spinlock memory allocation to be at the beginning of the memzone(to be sure about the alignment).
> It is good to see that now scanning/updating rte_eth_dev_data[] is lock
> protected, but it might be not very plausible to protect both data[] and
> next_owner_id using the same lock.
I guess you mean to the owner structure in rte_eth_dev_data[port_id].
The next_owner_id is read by ownership APIs(for owner validation), so it makes sense to use the same lock.
Actually, why not?
> In fact, for next_owner_id, you don't need a lock - just rte_atomic_t should
> be enough.
I don't think so, it is problematic in next_owner_id wraparound and may complicate the code in other places which read it.
Why not just to keep it simple and using the same lock?
> Another alternative would be to use 2 locks - one for next_owner_id second
> for actual data[] protection.
>
> Another thing - you'll probably need to grab/release a lock inside
> rte_eth_dev_allocated() too.
> It is a public function used by drivers, so need to be protected too.
>
Yes, I thought about it, but decided not to use lock in next:
rte_eth_dev_allocated
rte_eth_dev_count
rte_eth_dev_get_name_by_port
rte_eth_dev_get_port_by_name
maybe more...
Don't you think it is just timing depended?(ask in the next moment and you may get another answer) I don't see optional crash.
> > +
> > + if (rte_eal_process_type() == RTE_PROC_PRIMARY) {
> > + memset(rte_eth_dev_data, 0, data_size);
> > + *rte_eth_next_owner_id = RTE_ETH_DEV_NO_OWNER + 1;
> > + rte_spinlock_init(rte_eth_dev_ownership_lock);
> > + }
> > }
> >
> > struct rte_eth_dev *
> > @@ -225,7 +243,7 @@ struct rte_eth_dev *
> > }
> >
> > if (rte_eth_dev_data == NULL)
> > - rte_eth_dev_data_alloc();
> > + rte_eth_dev_share_data_alloc();
> >
> > if (rte_eth_dev_allocated(name) != NULL) {
> > RTE_PMD_DEBUG_TRACE("Ethernet Device with name %s
> already
> > allocated!\n", @@ -253,7 +271,7 @@ struct rte_eth_dev *
> > struct rte_eth_dev *eth_dev;
> >
> > if (rte_eth_dev_data == NULL)
> > - rte_eth_dev_data_alloc();
> > + rte_eth_dev_share_data_alloc();
> >
> > for (i = 0; i < RTE_MAX_ETHPORTS; i++) {
> > if (strcmp(rte_eth_dev_data[i].name, name) == 0) @@ -
> 278,8 +296,12
> > @@ struct rte_eth_dev *
> > if (eth_dev == NULL)
> > return -EINVAL;
> >
> > - memset(eth_dev->data, 0, sizeof(struct rte_eth_dev_data));
> > + rte_spinlock_lock(rte_eth_dev_ownership_lock);
> > +
> > eth_dev->state = RTE_ETH_DEV_UNUSED;
> > + memset(eth_dev->data, 0, sizeof(struct rte_eth_dev_data));
> > +
> > + rte_spinlock_unlock(rte_eth_dev_ownership_lock);
> > return 0;
> > }
> >
> > @@ -294,6 +316,174 @@ struct rte_eth_dev *
> > return 1;
> > }
> >
> > +static int
> > +rte_eth_is_valid_owner_id(uint16_t owner_id) {
> > + if (owner_id == RTE_ETH_DEV_NO_OWNER ||
> > + (*rte_eth_next_owner_id > RTE_ETH_DEV_NO_OWNER &&
> > + *rte_eth_next_owner_id <= owner_id)) {
> > + RTE_LOG(ERR, EAL, "Invalid owner_id=%d.\n", owner_id);
> > + return 0;
> > + }
> > + return 1;
> > +}
> > +
> > +uint16_t
> > +rte_eth_find_next_owned_by(uint16_t port_id, const uint16_t
> owner_id)
> > +{
> > + while (port_id < RTE_MAX_ETHPORTS &&
> > + (rte_eth_devices[port_id].state != RTE_ETH_DEV_ATTACHED ||
> > + rte_eth_devices[port_id].data->owner.id != owner_id))
> > + port_id++;
> > +
> > + if (port_id >= RTE_MAX_ETHPORTS)
> > + return RTE_MAX_ETHPORTS;
> > +
> > + return port_id;
> > +}
> > +
> > +int
> > +rte_eth_dev_owner_new(uint16_t *owner_id) {
> > + int ret = 0;
> > +
> > + rte_spinlock_lock(rte_eth_dev_ownership_lock);
> > +
> > + if (*rte_eth_next_owner_id == RTE_ETH_DEV_NO_OWNER) {
> > + /* Counter wrap around. */
> > + RTE_PMD_DEBUG_TRACE("Reached maximum number of
> Ethernet port owners.\n");
> > + ret = -EUSERS;
> > + } else {
> > + *owner_id = (*rte_eth_next_owner_id)++;
> > + }
> > +
> > + rte_spinlock_unlock(rte_eth_dev_ownership_lock);
> > + return ret;
> > +}
> > +
> > +int
> > +rte_eth_dev_owner_set(const uint16_t port_id,
> > + const struct rte_eth_dev_owner *owner)
>
> As a nit - if you'll have rte_eth_dev_owner_set(port_id, old_owner,
> new_owner)
> - that might be more plausible for user, and would greatly simplify unset()
> part:
> just set(port_id, cur_owner, zero_owner);
>
How the user should know the old owner?
> > +{
> > + struct rte_eth_dev_owner *port_owner;
> > + int ret = 0;
> > + int sret;
> > +
> > + rte_spinlock_lock(rte_eth_dev_ownership_lock);
> > +
> > + if (!rte_eth_dev_is_valid_port(port_id)) {
> > + RTE_PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
> > + ret = -ENODEV;
> > + goto unlock;
> > + }
> > +
> > + if (!rte_eth_is_valid_owner_id(owner->id)) {
> > + ret = -EINVAL;
> > + goto unlock;
> > + }
> > +
> > + port_owner = &rte_eth_devices[port_id].data->owner;
> > + if (port_owner->id != RTE_ETH_DEV_NO_OWNER &&
> > + port_owner->id != owner->id) {
> > + RTE_LOG(ERR, EAL,
> > + "Cannot set owner to port %d already owned by
> %s_%05d.\n",
> > + port_id, port_owner->name, port_owner->id);
> > + ret = -EPERM;
> > + goto unlock;
> > + }
> > +
> > + sret = snprintf(port_owner->name,
> RTE_ETH_MAX_OWNER_NAME_LEN, "%s",
> > + owner->name);
> > + if (sret < 0 || sret >= RTE_ETH_MAX_OWNER_NAME_LEN) {
>
> Personally, I don't see any reason to fail if description was truncated...
> Another alternative - just use rte_malloc() here to allocate big enough buffer
> to hold the description.
>
But it is static allocation like in the device name, why to allocate it differently?
> > + memset(port_owner->name, 0,
> RTE_ETH_MAX_OWNER_NAME_LEN);
> > + RTE_LOG(ERR, EAL, "Invalid owner name.\n");
> > + ret = -EINVAL;
> > + goto unlock;
> > + }
> > +
> > + port_owner->id = owner->id;
> > + RTE_PMD_DEBUG_TRACE("Port %d owner is %s_%05d.\n", port_id,
> > + owner->name, owner->id);
> > +
>
> As another nit - you can avoid all these gotos by restructuring code a bit:
>
> rte_eth_dev_owner_set(const uint16_t port_id, const struct
> rte_eth_dev_owner *owner) {
> rte_spinlock_lock(...);
> ret = _eth_dev_owner_set_unlocked(port_id, owner);
> rte_spinlock_unlock(...);
> return ret;
> }
>
Don't you like gotos? :)
I personally use it only in error\performance scenarios.
Do you think it worth the effort?
>
> > +unlock:
> > + rte_spinlock_unlock(rte_eth_dev_ownership_lock);
> > + return ret;
> > +}
> > +
> > +int
> > +rte_eth_dev_owner_unset(const uint16_t port_id, const uint16_t
> > +owner_id) {
> > + struct rte_eth_dev_owner *port_owner;
> > + int ret = 0;
> > +
> > + rte_spinlock_lock(rte_eth_dev_ownership_lock);
> > +
> > + if (!rte_eth_dev_is_valid_port(port_id)) {
> > + RTE_PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
> > + ret = -ENODEV;
> > + goto unlock;
> > + }
> > +
> > + if (!rte_eth_is_valid_owner_id(owner_id)) {
> > + ret = -EINVAL;
> > + goto unlock;
> > + }
> > +
> > + port_owner = &rte_eth_devices[port_id].data->owner;
> > + if (port_owner->id != owner_id) {
> > + RTE_LOG(ERR, EAL, "Cannot unset port %d owner (%s_%05d)
> by"
> > + " a different owner with id %5d.\n", port_id,
> > + port_owner->name, port_owner->id, owner_id);
> > + ret = -EPERM;
> > + goto unlock;
> > + }
> > + RTE_PMD_DEBUG_TRACE("Port %d owner %s_%05d has
> removed.\n", port_id,
> > + port_owner->name, port_owner->id);
> > +
> > + memset(port_owner, 0, sizeof(struct rte_eth_dev_owner));
> > +
> > +unlock:
> > + rte_spinlock_unlock(rte_eth_dev_ownership_lock);
> > + return ret;
> > +}
> > +
> > +void
> > +rte_eth_dev_owner_delete(const uint16_t owner_id) {
> > + uint16_t port_id;
> > +
> > + rte_spinlock_lock(rte_eth_dev_ownership_lock);
> > +
> > + if (rte_eth_is_valid_owner_id(owner_id)) {
> > + RTE_ETH_FOREACH_DEV_OWNED_BY(port_id, owner_id)
> > + memset(&rte_eth_devices[port_id].data->owner, 0,
> > + sizeof(struct rte_eth_dev_owner));
> > + RTE_PMD_DEBUG_TRACE("All port owners owned by %05d
> identifier"
> > + " have removed.\n", owner_id);
> > + }
> > +
> > + rte_spinlock_unlock(rte_eth_dev_ownership_lock);
> > +}
> > +
> > +int
> > +rte_eth_dev_owner_get(const uint16_t port_id, struct
> > +rte_eth_dev_owner *owner) {
> > + int ret = 0;
> > +
> > + rte_spinlock_lock(rte_eth_dev_ownership_lock);
> > +
> > + if (!rte_eth_dev_is_valid_port(port_id)) {
> > + RTE_PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
> > + ret = -ENODEV;
> > + } else {
> > + rte_memcpy(owner, &rte_eth_devices[port_id].data-
> >owner,
> > + sizeof(*owner));
> > + }
> > +
> > + rte_spinlock_unlock(rte_eth_dev_ownership_lock);
> > + return ret;
> > +}
> > +
> > int
> > rte_eth_dev_socket_id(uint16_t port_id) { diff --git
> > a/lib/librte_ether/rte_ethdev.h b/lib/librte_ether/rte_ethdev.h index
> > 57b61ed..88ad765 100644
> > --- a/lib/librte_ether/rte_ethdev.h
> > +++ b/lib/librte_ether/rte_ethdev.h
> > @@ -1760,6 +1760,15 @@ struct rte_eth_dev_sriov {
> >
> > #define RTE_ETH_NAME_MAX_LEN RTE_DEV_NAME_MAX_LEN
> >
> > +#define RTE_ETH_DEV_NO_OWNER 0
> > +
> > +#define RTE_ETH_MAX_OWNER_NAME_LEN 64
> > +
> > +struct rte_eth_dev_owner {
> > + uint16_t id; /**< The owner unique identifier. */
>
> Why limit yourself to 16bit here?
> Why not uint32_t/uint64_t - or even uuid_t and make system library to
> generate it for you?
> Wouldn't need to worry about overflows then.
>
Interesting.
Will change it and will remove the overflow code from next_id!
(just didn't think about realistic usage of a lot of owners and take same type as port ID).
> > + char name[RTE_ETH_MAX_OWNER_NAME_LEN]; /**< The owner
> name. */ };
> > +
> > /**
> > * @internal
> > * The data part, with no function pointers, associated with each ethernet
> device.
> > @@ -1810,6 +1819,7 @@ struct rte_eth_dev_data {
> > int numa_node; /**< NUMA node connection */
> > struct rte_vlan_filter_conf vlan_filter_conf;
> > /**< VLAN filter configuration. */
> > + struct rte_eth_dev_owner owner; /**< The port owner. */
> > };
> >
> > /** Device supports link state interrupt */ @@ -1846,6 +1856,85 @@
> > struct rte_eth_dev_data {
> >
> >
> > /**
> > + * Iterates over valid ethdev ports owned by a specific owner.
> > + *
> > + * @param port_id
> > + * The id of the next possible valid owned port.
> > + * @param owner_id
> > + * The owner identifier.
> > + * RTE_ETH_DEV_NO_OWNER means iterate over all valid ownerless
> ports.
> > + * @return
> > + * Next valid port id owned by owner_id, RTE_MAX_ETHPORTS if there is
> none.
> > + */
> > +uint16_t rte_eth_find_next_owned_by(uint16_t port_id, const uint16_t
> > +owner_id);
> > +
> > +/**
> > + * Macro to iterate over all enabled ethdev ports owned by a specific
> owner.
> > + */
> > +#define RTE_ETH_FOREACH_DEV_OWNED_BY(p, o) \
> > + for (p = rte_eth_find_next_owned_by(0, o); \
> > + (unsigned int)p < (unsigned int)RTE_MAX_ETHPORTS; \
> > + p = rte_eth_find_next_owned_by(p + 1, o))
> > +
> > +/**
> > + * Get a new unique owner identifier.
> > + * An owner identifier is used to owns Ethernet devices by only one
> > +DPDK entity
> > + * to avoid multiple management of device by different entities.
> > + *
> > + * @param owner_id
> > + * Owner identifier pointer.
> > + * @return
> > + * Negative errno value on error, 0 on success.
> > + */
> > +int rte_eth_dev_owner_new(uint16_t *owner_id);
> > +
> > +/**
> > + * Set an Ethernet device owner.
> > + *
> > + * @param port_id
> > + * The identifier of the port to own.
> > + * @param owner
> > + * The owner pointer.
> > + * @return
> > + * Negative errno value on error, 0 on success.
> > + */
> > +int rte_eth_dev_owner_set(const uint16_t port_id,
> > + const struct rte_eth_dev_owner *owner);
> > +
> > +/**
> > + * Unset Ethernet device owner to make the device ownerless.
> > + *
> > + * @param port_id
> > + * The identifier of port to make ownerless.
> > + * @param owner
> > + * The owner identifier.
> > + * @return
> > + * 0 on success, negative errno value on error.
> > + */
> > +int rte_eth_dev_owner_unset(const uint16_t port_id, const uint16_t
> > +owner_id);
> > +
> > +/**
> > + * Remove owner from all Ethernet devices owned by a specific owner.
> > + *
> > + * @param owner
> > + * The owner identifier.
> > + */
> > +void rte_eth_dev_owner_delete(const uint16_t owner_id);
> > +
> > +/**
> > + * Get the owner of an Ethernet device.
> > + *
> > + * @param port_id
> > + * The port identifier.
> > + * @param owner
> > + * The owner structure pointer to fill.
> > + * @return
> > + * 0 on success, negative errno value on error..
> > + */
> > +int rte_eth_dev_owner_get(const uint16_t port_id,
> > + struct rte_eth_dev_owner *owner);
> > +
> > +/**
> > * Get the total number of Ethernet devices that have been successfully
> > * initialized by the matching Ethernet driver during the PCI probing phase
> > * and that are available for applications to use. These devices must
> > be diff --git a/lib/librte_ether/rte_ethdev_version.map
> > b/lib/librte_ether/rte_ethdev_version.map
> > index e9681ac..5d20b5f 100644
> > --- a/lib/librte_ether/rte_ethdev_version.map
> > +++ b/lib/librte_ether/rte_ethdev_version.map
> > @@ -198,6 +198,18 @@ DPDK_17.11 {
> >
> > } DPDK_17.08;
> >
> > +DPDK_18.02 {
> > + global:
> > +
> > + rte_eth_dev_owner_delete;
> > + rte_eth_dev_owner_get;
> > + rte_eth_dev_owner_new;
> > + rte_eth_dev_owner_set;
> > + rte_eth_dev_owner_unset;
> > + rte_eth_find_next_owned_by;
> > +
> > +} DPDK_17.11;
> > +
> > EXPERIMENTAL {
> > global:
> >
> > --
> > 1.8.3.1
next prev parent reply other threads:[~2018-01-10 16:58 UTC|newest]
Thread overview: 212+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-11-28 11:57 [dpdk-dev] [PATCH 0/5] ethdev: Port ownership Matan Azrad
2017-11-28 11:57 ` [dpdk-dev] [PATCH 1/5] ethdev: free a port by a dedicated API Matan Azrad
2017-11-28 11:57 ` [dpdk-dev] [PATCH 2/5] ethdev: add port ownership Matan Azrad
2017-11-30 12:36 ` Neil Horman
2017-11-30 13:24 ` Gaëtan Rivet
2017-11-30 14:30 ` Matan Azrad
2017-11-30 15:09 ` Gaëtan Rivet
2017-11-30 15:43 ` Matan Azrad
2017-12-01 12:09 ` Neil Horman
2017-12-03 8:04 ` Matan Azrad
2017-12-03 11:10 ` Ananyev, Konstantin
2017-12-03 13:46 ` Matan Azrad
2017-12-04 16:01 ` Neil Horman
2017-12-04 18:10 ` Matan Azrad
2017-12-04 22:30 ` Neil Horman
2017-12-05 6:08 ` Matan Azrad
2017-12-05 10:05 ` Bruce Richardson
2017-12-08 11:35 ` Thomas Monjalon
2017-12-08 12:31 ` Neil Horman
2017-12-21 17:06 ` Thomas Monjalon
2017-12-21 17:43 ` Neil Horman
2017-12-21 19:37 ` Matan Azrad
2017-12-21 20:14 ` Neil Horman
2017-12-21 21:57 ` Matan Azrad
2017-12-22 14:26 ` Neil Horman
2017-12-23 22:36 ` Matan Azrad
2017-12-29 16:56 ` Neil Horman
2017-12-05 19:26 ` Neil Horman
2017-12-08 11:06 ` Thomas Monjalon
2017-12-05 11:12 ` Ananyev, Konstantin
2017-12-05 11:44 ` Ananyev, Konstantin
2017-12-05 11:53 ` Thomas Monjalon
2017-12-05 14:56 ` Bruce Richardson
2017-12-05 14:57 ` Ananyev, Konstantin
2017-12-05 11:47 ` Thomas Monjalon
2017-12-05 15:13 ` Ananyev, Konstantin
2017-12-05 15:49 ` Thomas Monjalon
2017-11-28 11:57 ` [dpdk-dev] [PATCH 3/5] net/failsafe: free an eth port by a dedicated API Matan Azrad
2017-11-28 11:58 ` [dpdk-dev] [PATCH 4/5] net/failsafe: use ownership mechanism to own ports Matan Azrad
2017-11-28 11:58 ` [dpdk-dev] [PATCH 5/5] app/testpmd: adjust ethdev port ownership Matan Azrad
2018-01-07 9:45 ` [dpdk-dev] [PATCH v2 0/6] ethdev: " Matan Azrad
2018-01-07 9:45 ` [dpdk-dev] [PATCH v2 1/6] ethdev: fix port data reset timing Matan Azrad
2018-01-07 9:45 ` [dpdk-dev] [PATCH v2 2/6] ethdev: add port ownership Matan Azrad
2018-01-10 13:36 ` Ananyev, Konstantin
2018-01-10 16:58 ` Matan Azrad [this message]
2018-01-11 12:40 ` Ananyev, Konstantin
2018-01-11 14:51 ` Matan Azrad
2018-01-12 0:02 ` Ananyev, Konstantin
2018-01-12 7:24 ` Matan Azrad
2018-01-15 11:45 ` Ananyev, Konstantin
2018-01-15 13:09 ` Matan Azrad
2018-01-15 18:43 ` Ananyev, Konstantin
2018-01-16 8:04 ` Matan Azrad
2018-01-16 19:11 ` Ananyev, Konstantin
2018-01-16 20:32 ` Matan Azrad
2018-01-17 11:24 ` Ananyev, Konstantin
2018-01-17 12:05 ` Matan Azrad
2018-01-17 12:54 ` Ananyev, Konstantin
2018-01-17 13:10 ` Matan Azrad
2018-01-17 16:52 ` Ananyev, Konstantin
2018-01-17 18:02 ` Matan Azrad
2018-01-17 20:34 ` Matan Azrad
2018-01-18 14:17 ` Ananyev, Konstantin
2018-01-18 14:26 ` Matan Azrad
2018-01-18 14:41 ` Ananyev, Konstantin
2018-01-18 14:45 ` Matan Azrad
2018-01-18 14:51 ` Ananyev, Konstantin
2018-01-18 15:00 ` Matan Azrad
2018-01-17 14:00 ` Neil Horman
2018-01-17 17:01 ` Ananyev, Konstantin
2018-01-18 13:10 ` Neil Horman
2018-01-18 14:00 ` Matan Azrad
2018-01-18 16:54 ` Neil Horman
2018-01-18 17:20 ` Matan Azrad
2018-01-18 18:41 ` Neil Horman
2018-01-18 20:21 ` Matan Azrad
2018-01-19 1:41 ` Neil Horman
2018-01-19 7:14 ` Matan Azrad
2018-01-19 9:30 ` Bruce Richardson
2018-01-19 10:44 ` Matan Azrad
2018-01-19 13:30 ` Neil Horman
2018-01-19 13:57 ` Matan Azrad
2018-01-19 14:13 ` Thomas Monjalon
2018-01-19 15:27 ` Neil Horman
2018-01-19 17:17 ` Thomas Monjalon
2018-01-19 17:43 ` Neil Horman
2018-01-19 18:12 ` Thomas Monjalon
2018-01-19 19:47 ` Neil Horman
2018-01-19 20:19 ` Thomas Monjalon
2018-01-19 22:52 ` Neil Horman
2018-01-20 3:38 ` Tuxdriver
2018-01-20 12:54 ` Ananyev, Konstantin
2018-01-20 14:02 ` Thomas Monjalon
2018-01-19 12:55 ` Neil Horman
2018-01-19 13:52 ` Neil Horman
2018-01-18 16:27 ` Neil Horman
2018-01-17 17:58 ` Matan Azrad
2018-01-18 13:20 ` Neil Horman
2018-01-18 14:52 ` Matan Azrad
2018-01-19 13:57 ` Neil Horman
2018-01-19 14:07 ` Thomas Monjalon
2018-01-19 14:32 ` Neil Horman
2018-01-19 17:09 ` Thomas Monjalon
2018-01-19 17:37 ` Neil Horman
2018-01-19 18:10 ` Thomas Monjalon
2018-01-21 22:12 ` Ferruh Yigit
2018-01-07 9:45 ` [dpdk-dev] [PATCH v2 3/6] ethdev: synchronize port allocation Matan Azrad
2018-01-07 9:58 ` Matan Azrad
2018-01-07 9:45 ` [dpdk-dev] [PATCH v2 4/6] net/failsafe: free an eth port by a dedicated API Matan Azrad
2018-01-07 9:45 ` [dpdk-dev] [PATCH v2 5/6] net/failsafe: use ownership mechanism to own ports Matan Azrad
2018-01-08 10:32 ` Gaëtan Rivet
2018-01-08 11:16 ` Matan Azrad
2018-01-08 11:35 ` Gaëtan Rivet
2018-01-07 9:45 ` [dpdk-dev] [PATCH v2 6/6] app/testpmd: adjust ethdev port ownership Matan Azrad
2018-01-08 11:39 ` Gaëtan Rivet
2018-01-08 12:30 ` Matan Azrad
2018-01-08 13:30 ` Gaëtan Rivet
2018-01-08 13:55 ` Matan Azrad
2018-01-08 14:21 ` Gaëtan Rivet
2018-01-08 14:42 ` Matan Azrad
2018-01-16 5:53 ` Lu, Wenzhuo
2018-01-16 8:15 ` Matan Azrad
2018-01-17 0:46 ` Lu, Wenzhuo
2018-01-17 8:51 ` Matan Azrad
2018-01-18 0:53 ` Lu, Wenzhuo
2018-01-18 16:35 ` [dpdk-dev] [PATCH v3 0/7] Port ownership and syncronization Matan Azrad
2018-01-18 16:35 ` [dpdk-dev] [PATCH v3 1/7] ethdev: fix port data reset timing Matan Azrad
2018-01-18 17:00 ` Thomas Monjalon
2018-01-19 12:38 ` Ananyev, Konstantin
2018-03-05 11:24 ` [dpdk-dev] [dpdk-stable] " Ferruh Yigit
2018-03-05 14:52 ` Matan Azrad
2018-03-05 15:06 ` Ferruh Yigit
2018-03-05 15:12 ` Matan Azrad
2018-03-27 22:37 ` Ferruh Yigit
2018-03-28 12:07 ` Matan Azrad
2018-03-30 10:39 ` Ferruh Yigit
2018-04-19 11:07 ` Ferruh Yigit
2018-04-25 12:16 ` Matan Azrad
2018-04-25 12:30 ` Ori Kam
2018-04-25 12:54 ` Ferruh Yigit
2018-04-25 14:01 ` Matan Azrad
2018-01-18 16:35 ` [dpdk-dev] [PATCH v3 2/7] ethdev: fix used portid allocation Matan Azrad
2018-01-18 17:00 ` Thomas Monjalon
2018-01-19 12:40 ` Ananyev, Konstantin
2018-01-20 16:48 ` Matan Azrad
2018-01-20 17:26 ` Ananyev, Konstantin
2018-01-18 16:35 ` [dpdk-dev] [PATCH v3 3/7] ethdev: add port ownership Matan Azrad
2018-01-18 21:11 ` Thomas Monjalon
2018-01-19 12:41 ` Ananyev, Konstantin
2018-01-18 16:35 ` [dpdk-dev] [PATCH v3 4/7] ethdev: synchronize port allocation Matan Azrad
2018-01-18 20:43 ` Thomas Monjalon
2018-01-18 20:52 ` Matan Azrad
2018-01-18 21:17 ` Thomas Monjalon
2018-01-19 12:47 ` Ananyev, Konstantin
2018-01-18 16:35 ` [dpdk-dev] [PATCH v3 5/7] net/failsafe: free an eth port by a dedicated API Matan Azrad
2018-01-18 16:35 ` [dpdk-dev] [PATCH v3 6/7] net/failsafe: use ownership mechanism to own ports Matan Azrad
2018-01-18 16:35 ` [dpdk-dev] [PATCH v3 7/7] app/testpmd: adjust ethdev port ownership Matan Azrad
2018-01-19 12:37 ` Ananyev, Konstantin
2018-01-19 12:51 ` Matan Azrad
2018-01-19 13:08 ` Ananyev, Konstantin
2018-01-19 13:35 ` Matan Azrad
2018-01-19 15:00 ` Gaëtan Rivet
2018-01-20 18:14 ` Matan Azrad
2018-01-22 10:17 ` Gaëtan Rivet
2018-01-22 11:22 ` Matan Azrad
2018-01-22 12:28 ` Ananyev, Konstantin
2018-01-22 13:22 ` Matan Azrad
2018-01-22 20:48 ` Ananyev, Konstantin
2018-01-23 8:54 ` Matan Azrad
2018-01-23 12:56 ` Gaëtan Rivet
2018-01-23 14:30 ` Matan Azrad
2018-01-25 9:36 ` Matan Azrad
2018-01-25 10:05 ` Thomas Monjalon
2018-01-25 11:15 ` Ananyev, Konstantin
2018-01-25 11:33 ` Thomas Monjalon
2018-01-25 11:55 ` Ananyev, Konstantin
2018-01-23 13:34 ` Ananyev, Konstantin
2018-01-23 14:18 ` Thomas Monjalon
2018-01-23 15:12 ` Ananyev, Konstantin
2018-01-23 15:18 ` Ananyev, Konstantin
2018-01-23 17:33 ` Thomas Monjalon
2018-01-23 21:18 ` Ananyev, Konstantin
2018-01-24 8:10 ` Thomas Monjalon
2018-01-24 18:30 ` Ananyev, Konstantin
2018-01-25 10:55 ` Thomas Monjalon
2018-01-25 11:09 ` Ananyev, Konstantin
2018-01-25 11:27 ` Thomas Monjalon
2018-01-23 14:43 ` Matan Azrad
2018-01-20 21:24 ` [dpdk-dev] [PATCH v4 0/7] Port ownership and syncronization Matan Azrad
2018-01-20 21:24 ` [dpdk-dev] [PATCH v4 1/7] ethdev: fix port data reset timing Matan Azrad
2018-01-20 21:24 ` [dpdk-dev] [PATCH v4 2/7] ethdev: fix used portid allocation Matan Azrad
2018-01-20 21:24 ` [dpdk-dev] [PATCH v4 3/7] ethdev: add port ownership Matan Azrad
2018-01-21 20:43 ` Ferruh Yigit
2018-01-21 20:46 ` Ferruh Yigit
2018-01-20 21:24 ` [dpdk-dev] [PATCH v4 4/7] ethdev: synchronize port allocation Matan Azrad
2018-01-20 21:24 ` [dpdk-dev] [PATCH v4 5/7] net/failsafe: free an eth port by a dedicated API Matan Azrad
2018-01-20 21:24 ` [dpdk-dev] [PATCH v4 6/7] net/failsafe: use ownership mechanism to own ports Matan Azrad
2018-01-20 21:24 ` [dpdk-dev] [PATCH v4 7/7] app/testpmd: adjust ethdev port ownership Matan Azrad
2018-01-22 16:38 ` [dpdk-dev] [PATCH v5 0/7] Port ownership and synchronization Matan Azrad
2018-01-22 16:38 ` [dpdk-dev] [PATCH v5 1/7] ethdev: fix port data reset timing Matan Azrad
2018-01-22 16:38 ` [dpdk-dev] [PATCH v5 2/7] ethdev: fix used portid allocation Matan Azrad
2018-01-22 16:38 ` [dpdk-dev] [PATCH v5 3/7] ethdev: add port ownership Matan Azrad
2018-01-22 16:38 ` [dpdk-dev] [PATCH v5 4/7] ethdev: synchronize port allocation Matan Azrad
2018-01-22 16:38 ` [dpdk-dev] [PATCH v5 5/7] net/failsafe: free an eth port by a dedicated API Matan Azrad
2018-01-22 16:38 ` [dpdk-dev] [PATCH v5 6/7] net/failsafe: use ownership mechanism to own ports Matan Azrad
2018-01-22 16:38 ` [dpdk-dev] [PATCH v5 7/7] app/testpmd: adjust ethdev port ownership Matan Azrad
2018-01-25 1:47 ` Lu, Wenzhuo
2018-01-25 8:30 ` Matan Azrad
2018-01-26 0:50 ` Lu, Wenzhuo
2018-01-29 11:21 ` [dpdk-dev] [PATCH v5 0/7] Port ownership and synchronization Matan Azrad
2018-01-31 19:53 ` Thomas Monjalon
2018-01-25 14:35 ` [dpdk-dev] [PATCH v3 0/7] Port ownership and syncronization Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=AM6PR0502MB379755992EDDF002D06D9521D2110@AM6PR0502MB3797.eurprd05.prod.outlook.com \
--to=matan@mellanox.com \
--cc=bruce.richardson@intel.com \
--cc=dev@dpdk.org \
--cc=gaetan.rivet@6wind.com \
--cc=jingjing.wu@intel.com \
--cc=konstantin.ananyev@intel.com \
--cc=nhorman@tuxdriver.com \
--cc=thomas@monjalon.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).