From: "Wang, Xiao W" <xiao.w.wang@intel.com>
To: "Yigit, Ferruh" <ferruh.yigit@intel.com>,
"Lu, Wenzhuo" <wenzhuo.lu@intel.com>
Cc: "dev@dpdk.org" <dev@dpdk.org>
Subject: Re: [dpdk-dev] [PATCH 01/39] net/ixgbe/base: fix delta check for setting VFTA
Date: Thu, 22 Sep 2016 15:58:41 +0000 [thread overview]
Message-ID: <B7F2E978279D1D49A3034B7786DACF406C21F7D1@SHSMSX101.ccr.corp.intel.com> (raw)
In-Reply-To: <9e4205ae-1d41-4956-ad3e-115ef0006c11@intel.com>
Hi Ferruh,
> -----Original Message-----
> From: Yigit, Ferruh
> Sent: Tuesday, September 20, 2016 1:01 AM
> To: Wang, Xiao W <xiao.w.wang@intel.com>; Lu, Wenzhuo
> <wenzhuo.lu@intel.com>
> Cc: dev@dpdk.org
> Subject: Re: [dpdk-dev] [PATCH 01/39] net/ixgbe/base: fix delta check for
> setting VFTA
>
> On 8/27/2016 4:47 PM, Xiao Wang wrote:
> > The delta value rather than vfta_delta pointer should be checked.
> >
> > Fixes: b978f7b38c14 ("net/ixgbe/base: simplify VLAN management")
> >
> > Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
> > ---
> > drivers/net/ixgbe/base/ixgbe_82598.c | 6 +++---
> > drivers/net/ixgbe/base/ixgbe_api.c | 7 ++++---
> > drivers/net/ixgbe/base/ixgbe_common.c | 2 +-
> > 3 files changed, 8 insertions(+), 7 deletions(-)
> >
> > diff --git a/drivers/net/ixgbe/base/ixgbe_82598.c
> b/drivers/net/ixgbe/base/ixgbe_82598.c
> > index db80880..724dcbb 100644
> > --- a/drivers/net/ixgbe/base/ixgbe_82598.c
> > +++ b/drivers/net/ixgbe/base/ixgbe_82598.c
> > @@ -995,19 +995,19 @@ STATIC s32 ixgbe_clear_vmdq_82598(struct
> ixgbe_hw *hw, u32 rar, u32 vmdq)
> > * @vlan: VLAN id to write to VLAN filter
> > * @vind: VMDq output index that maps queue to VLAN id in VFTA
> > * @vlan_on: boolean flag to turn on/off VLAN in VFTA
> > - * @bypass_vlvf: boolean flag - unused
> > + * @vlvf_bypass: boolean flag - unused
>
> bypass_vlvf -> vlvf_bypass belongs to different patch
>
> > *
> > * Turn on/off specified VLAN in the VLAN filter table.
> > **/
> > s32 ixgbe_set_vfta_82598(struct ixgbe_hw *hw, u32 vlan, u32 vind,
> > - bool vlan_on, bool bypass_vlvf)
> > + bool vlan_on, bool vlvf_bypass)
> > {
> > u32 regindex;
> > u32 bitindex;
> > u32 bits;
> > u32 vftabyte;
> >
> > - UNREFERENCED_1PARAMETER(bypass_vlvf);
> > + UNREFERENCED_1PARAMETER(vlvf_bypass);
> >
> > DEBUGFUNC("ixgbe_set_vfta_82598");
> >
> > diff --git a/drivers/net/ixgbe/base/ixgbe_api.c
> b/drivers/net/ixgbe/base/ixgbe_api.c
> > index 1786867..5b721af 100644
> > --- a/drivers/net/ixgbe/base/ixgbe_api.c
> > +++ b/drivers/net/ixgbe/base/ixgbe_api.c
> > @@ -1090,7 +1090,7 @@ s32 ixgbe_set_vfta(struct ixgbe_hw *hw, u32 vlan,
> u32 vind, bool vlan_on,
> > bool vlvf_bypass)
> > {
> > return ixgbe_call_func(hw, hw->mac.ops.set_vfta, (hw, vlan, vind,
> > - vlan_on, vlvf_bypass),
> IXGBE_NOT_IMPLEMENTED);
> > + vlan_on, vlvf_bypass),
> IXGBE_NOT_IMPLEMENTED);
> > }
> >
> > /**
> > @@ -1100,7 +1100,7 @@ s32 ixgbe_set_vfta(struct ixgbe_hw *hw, u32 vlan,
> u32 vind, bool vlan_on,
> > * @vind: VMDq output index that maps queue to VLAN id in VLVFB
> > * @vlan_on: boolean flag to turn on/off VLAN in VLVF
> > * @vfta_delta: pointer to the difference between the current value of VFTA
> > - * and the desired value
> > + * and the desired value
> > * @vfta: the desired value of the VFTA
> > * @vlvf_bypass: boolean flag indicating updating the default pool is okay
> > *
> > @@ -1110,7 +1110,7 @@ s32 ixgbe_set_vlvf(struct ixgbe_hw *hw, u32 vlan,
> u32 vind, bool vlan_on,
> > u32 *vfta_delta, u32 vfta, bool vlvf_bypass)
> > {
> > return ixgbe_call_func(hw, hw->mac.ops.set_vlvf, (hw, vlan, vind,
> > - vlan_on, vfta_delta, vfta, vlvf_bypass),
> > + vlan_on, vfta_delta, vfta, vlvf_bypass),
> > IXGBE_NOT_IMPLEMENTED);
> > }
> >
> > @@ -1659,6 +1659,7 @@ void ixgbe_init_swfw_semaphore(struct ixgbe_hw
> *hw)
> > hw->mac.ops.init_swfw_sync(hw);
> > }
> >
> > +
>
> unrelated whitespace modifications
>
>
> > void ixgbe_disable_rx(struct ixgbe_hw *hw)
> > {
> > if (hw->mac.ops.disable_rx)
> > diff --git a/drivers/net/ixgbe/base/ixgbe_common.c
> b/drivers/net/ixgbe/base/ixgbe_common.c
> > index 811875a..161bf32 100644
> > --- a/drivers/net/ixgbe/base/ixgbe_common.c
> > +++ b/drivers/net/ixgbe/base/ixgbe_common.c
> > @@ -3967,7 +3967,7 @@ s32 ixgbe_set_vlvf_generic(struct ixgbe_hw *hw,
> u32 vlan, u32 vind,
> > * we run the risk of stray packets leaking into
> > * the PF via the default pool
> > */
> > - if (vfta_delta)
> > + if (*vfta_delta)
>
> This seems only update mentioned in patch commit log.
>
> What about extracting all other clean up modifications into a new patch,
> other patches also have similar fixes, all can go into that cleanup patch?
Good advice, I will put all the minor misc modifications into a separate patch.
Thanks.
>
> > IXGBE_WRITE_REG(hw, IXGBE_VFTA(vlan / 32), vfta);
> >
> > /* disable VLVF and clear remaining bit from pool */
> >
>
next prev parent reply other threads:[~2016-09-22 15:58 UTC|newest]
Thread overview: 107+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-27 15:47 [dpdk-dev] [PATCH 00/39] net/ixgbe: base code update Xiao Wang
2016-08-27 15:47 ` [dpdk-dev] [PATCH 01/39] net/ixgbe/base: fix delta check for setting VFTA Xiao Wang
2016-09-19 17:00 ` Ferruh Yigit
2016-09-22 15:58 ` Wang, Xiao W [this message]
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 00/40] net/ixgbe: base code update Xiao Wang
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 01/40] net/ixgbe/base: fix delta check for setting VFTA Xiao Wang
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 02/40] net/ixgbe/base: remove X550em SFP iXFI setup Xiao Wang
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 03/40] net/ixgbe/base: change endianness of PHY data Xiao Wang
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 04/40] net/ixgbe/base: add X550em_a 10G PHY support Xiao Wang
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 05/40] net/ixgbe/base: move vf_update_xcast_mode to base code Xiao Wang
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 06/40] net/ixgbe/base: introduce new ops init functions Xiao Wang
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 07/40] net/ixgbe/base: separate PHY probe code Xiao Wang
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 08/40] net/ixgbe/base: fully initialize X550em_a 1G PHYs Xiao Wang
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 09/40] net/ixgbe/base: add macros for VF promiscuous mode Xiao Wang
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 10/40] net/ixgbe/base: add FC setup for X550em_a fiber Xiao Wang
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 11/40] net/ixgbe/base: add FC autoneg " Xiao Wang
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 12/40] net/ixgbe/base: clear page register in error path Xiao Wang
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 13/40] net/ixgbe/base: configure DMAC for 10Mb operation Xiao Wang
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 14/40] net/ixgbe/base: fix function comments about X550 Xiao Wang
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 15/40] net/ixgbe/base: report setting LPE register error Xiao Wang
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 16/40] net/ixgbe/base: bump mailbox version Xiao Wang
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 17/40] net/ixgbe/base: access IOSF by host interface Xiao Wang
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 18/40] net/ixgbe/base: fix check on NACK Xiao Wang
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 19/40] net/ixgbe/base: define X550 PCIe serial MAC addr Xiao Wang
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 20/40] net/ixgbe/base: bypass checking link for crosstalk Xiao Wang
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 21/40] net/ixgbe/base: support X550em_a SGMII FC autoneg Xiao Wang
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 22/40] net/ixgbe/base: add macros for GENEVE UDP port Xiao Wang
2016-09-25 9:00 ` [dpdk-dev] [PATCH v2 23/40] net/ixgbe/base: add bound check in LED functions Xiao Wang
2016-09-25 9:00 ` [dpdk-dev] [PATCH v2 24/40] net/ixgbe/base: use default check link function Xiao Wang
2016-09-25 9:00 ` [dpdk-dev] [PATCH v2 25/40] net/ixgbe/base: set default autoneg speed at reset Xiao Wang
2016-09-25 9:00 ` [dpdk-dev] [PATCH v2 26/40] net/ixgbe/base: add missing FDIRSCTPM mask setting Xiao Wang
2016-09-25 9:00 ` [dpdk-dev] [PATCH v2 27/40] net/ixgbe/base: commonize mailbox write and read Xiao Wang
2016-09-25 9:00 ` [dpdk-dev] [PATCH v2 28/40] net/ixgbe/base: reduce delay for SWFW semaphore Xiao Wang
2016-09-25 9:00 ` [dpdk-dev] [PATCH v2 29/40] net/ixgbe/base: report autoneg supported for X550 Xiao Wang
2016-09-25 9:00 ` [dpdk-dev] [PATCH v2 30/40] net/ixgbe/base: remove X550em_a 100Mbps support Xiao Wang
2016-09-25 9:00 ` [dpdk-dev] [PATCH v2 31/40] net/ixgbe/base: unify link speed value Xiao Wang
2016-09-25 9:00 ` [dpdk-dev] [PATCH v2 32/40] net/ixgbe/base: separate ops init from PHY init Xiao Wang
2016-09-25 9:00 ` [dpdk-dev] [PATCH v2 33/40] net/ixgbe/base: add X550em_a FW ALEF support Xiao Wang
2016-09-25 9:00 ` [dpdk-dev] [PATCH v2 34/40] net/ixgbe/base: add two MAC ops for Hyper-V Xiao Wang
2016-09-25 9:00 ` [dpdk-dev] [PATCH v2 35/40] net/ixgbe/base: hold semaphore for shadow RAM access Xiao Wang
2016-09-25 9:00 ` [dpdk-dev] [PATCH v2 36/40] net/ixgbe/base: update X550em_a backplane speed Xiao Wang
2016-09-25 9:00 ` [dpdk-dev] [PATCH v2 37/40] net/ixgbe/base: clean code of flow control autoneg Xiao Wang
2016-09-25 9:00 ` [dpdk-dev] [PATCH v2 38/40] net/ixgbe/base: do not skip PHY configuration Xiao Wang
2016-09-25 9:00 ` [dpdk-dev] [PATCH v2 39/40] net/ixgbe/base: clean up Xiao Wang
2016-09-25 9:00 ` [dpdk-dev] [PATCH v2 40/40] net/ixgbe/base: add base driver update brief Xiao Wang
2016-09-26 2:06 ` [dpdk-dev] [PATCH v2 00/40] net/ixgbe: base code update Lu, Wenzhuo
2016-09-28 15:31 ` Bruce Richardson
2016-08-27 15:47 ` [dpdk-dev] [PATCH 02/39] net/ixgbe/base: remove X550em SFP iXFI setup Xiao Wang
2016-09-19 17:01 ` Ferruh Yigit
2016-08-27 15:47 ` [dpdk-dev] [PATCH 03/39] net/ixgbe/base: change endianness of PHY data Xiao Wang
2016-09-19 17:01 ` Ferruh Yigit
2016-09-25 0:36 ` Wang, Xiao W
2016-08-27 15:47 ` [dpdk-dev] [PATCH 04/39] net/ixgbe/base: add X550em_a 10G PHY support Xiao Wang
2016-08-27 15:47 ` [dpdk-dev] [PATCH 05/39] net/ixgbe/base: support VF multicast promiscuous Xiao Wang
2016-09-19 17:05 ` Ferruh Yigit
2016-09-23 3:35 ` Wang, Xiao W
2016-08-27 15:47 ` [dpdk-dev] [PATCH 06/39] net/ixgbe/base: introduce new ops init functions Xiao Wang
2016-08-27 15:47 ` [dpdk-dev] [PATCH 07/39] net/ixgbe/base: separate PHY probe code Xiao Wang
2016-08-27 15:47 ` [dpdk-dev] [PATCH 08/39] net/ixgbe/base: fully initialize X550em_a 1G PHYs Xiao Wang
2016-08-27 15:47 ` [dpdk-dev] [PATCH 09/39] net/ixgbe/base: add macros for VF promiscuous mode Xiao Wang
2016-08-27 15:47 ` [dpdk-dev] [PATCH 10/39] net/ixgbe/base: add FC setup for X550em_a fiber Xiao Wang
2016-08-27 15:47 ` [dpdk-dev] [PATCH 11/39] net/ixgbe/base: add FC autoneg " Xiao Wang
2016-08-27 15:47 ` [dpdk-dev] [PATCH 12/39] net/ixgbe/base: clear page register in error path Xiao Wang
2016-08-27 15:47 ` [dpdk-dev] [PATCH 13/39] net/ixgbe/base: configure DMAC for 10Mb operation Xiao Wang
2016-08-27 15:47 ` [dpdk-dev] [PATCH 14/39] net/ixgbe/base: fix function comments about X550 Xiao Wang
2016-08-27 15:47 ` [dpdk-dev] [PATCH 15/39] net/ixgbe/base: report setting LPE register error Xiao Wang
2016-08-27 15:47 ` [dpdk-dev] [PATCH 16/39] net/ixgbe/base: bump mailbox version Xiao Wang
2016-09-19 17:03 ` Ferruh Yigit
2016-09-23 3:50 ` Wang, Xiao W
2016-08-27 15:48 ` [dpdk-dev] [PATCH 17/39] net/ixgbe/base: access IOSF by host interface Xiao Wang
2016-09-19 17:04 ` Ferruh Yigit
2016-09-23 5:16 ` Wang, Xiao W
2016-08-27 15:48 ` [dpdk-dev] [PATCH 18/39] net/ixgbe/base: fix check on NACK Xiao Wang
2016-09-19 17:07 ` Ferruh Yigit
2016-09-23 6:05 ` Wang, Xiao W
2016-08-27 15:48 ` [dpdk-dev] [PATCH 19/39] net/ixgbe/base: define X550 PCIe serial MAC addr Xiao Wang
2016-08-27 15:48 ` [dpdk-dev] [PATCH 20/39] net/ixgbe/base: bypass checking link for crosstalk Xiao Wang
2016-08-27 15:48 ` [dpdk-dev] [PATCH 21/39] net/ixgbe/base: support X550em_a SGMII FC autoneg Xiao Wang
2016-08-27 15:48 ` [dpdk-dev] [PATCH 22/39] net/ixgbe/base: add macros for GENEVE UDP port Xiao Wang
2016-08-27 15:48 ` [dpdk-dev] [PATCH 23/39] net/ixgbe/base: add bound check in LED functions Xiao Wang
2016-09-19 17:06 ` Ferruh Yigit
2016-09-22 16:08 ` Wang, Xiao W
2016-08-27 15:48 ` [dpdk-dev] [PATCH 24/39] net/ixgbe/base: use default check link function Xiao Wang
2016-08-27 15:48 ` [dpdk-dev] [PATCH 25/39] net/ixgbe/base: set default autoneg speed at reset Xiao Wang
2016-08-27 15:48 ` [dpdk-dev] [PATCH 26/39] net/ixgbe/base: add missing FDIRSCTPM mask setting Xiao Wang
2016-08-27 15:48 ` [dpdk-dev] [PATCH 27/39] net/ixgbe/base: commonize mailbox write and read Xiao Wang
2016-08-27 15:48 ` [dpdk-dev] [PATCH 28/39] net/ixgbe/base: reduce delay for SWFW semaphore Xiao Wang
2016-08-27 15:48 ` [dpdk-dev] [PATCH 29/39] net/ixgbe/base: report autoneg supported for X550 Xiao Wang
2016-09-19 17:07 ` Ferruh Yigit
2016-09-23 0:59 ` Wang, Xiao W
2016-08-27 15:48 ` [dpdk-dev] [PATCH 30/39] net/ixgbe/base: remove X550em_a 100Mbps support Xiao Wang
2016-08-27 15:48 ` [dpdk-dev] [PATCH 31/39] net/ixgbe/base: unify link speed value Xiao Wang
2016-08-27 15:48 ` [dpdk-dev] [PATCH 32/39] net/ixgbe/base: separate ops init from PHY init Xiao Wang
2016-08-27 15:48 ` [dpdk-dev] [PATCH 33/39] net/ixgbe/base: add X550em_a FW ALEF support Xiao Wang
2016-09-19 17:07 ` Ferruh Yigit
2016-09-22 2:56 ` Lu, Wenzhuo
2016-09-23 6:47 ` Wang, Xiao W
2016-08-27 15:48 ` [dpdk-dev] [PATCH 34/39] net/ixgbe/base: add two MAC ops for Hyper-V Xiao Wang
2016-08-27 15:48 ` [dpdk-dev] [PATCH 35/39] net/ixgbe/base: hold semaphore for shadow RAM access Xiao Wang
2016-09-19 17:08 ` Ferruh Yigit
2016-09-23 8:06 ` Wang, Xiao W
2016-08-27 15:48 ` [dpdk-dev] [PATCH 36/39] net/ixgbe/base: update X550em_a backplane speed Xiao Wang
2016-08-27 15:48 ` [dpdk-dev] [PATCH 37/39] net/ixgbe/base: clean code of flow control autoneg Xiao Wang
2016-08-27 15:48 ` [dpdk-dev] [PATCH 38/39] net/ixgbe/base: do not skip PHY configuration Xiao Wang
2016-08-27 15:48 ` [dpdk-dev] [PATCH 39/39] net/ixgbe/base: add base driver update brief Xiao Wang
2016-09-19 17:08 ` Ferruh Yigit
2016-09-22 2:55 ` Lu, Wenzhuo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=B7F2E978279D1D49A3034B7786DACF406C21F7D1@SHSMSX101.ccr.corp.intel.com \
--to=xiao.w.wang@intel.com \
--cc=dev@dpdk.org \
--cc=ferruh.yigit@intel.com \
--cc=wenzhuo.lu@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).