From: "Wang, Xiao W" <xiao.w.wang@intel.com>
To: "Yigit, Ferruh" <ferruh.yigit@intel.com>,
"Lu, Wenzhuo" <wenzhuo.lu@intel.com>
Cc: "dev@dpdk.org" <dev@dpdk.org>
Subject: Re: [dpdk-dev] [PATCH 05/39] net/ixgbe/base: support VF multicast promiscuous
Date: Fri, 23 Sep 2016 03:35:44 +0000 [thread overview]
Message-ID: <B7F2E978279D1D49A3034B7786DACF406C21F96D@SHSMSX101.ccr.corp.intel.com> (raw)
In-Reply-To: <293acea6-24df-690c-78fe-f5b4cb5b913c@intel.com>
Hi Ferruh,
> -----Original Message-----
> From: Yigit, Ferruh
> Sent: Tuesday, September 20, 2016 1:06 AM
> To: Wang, Xiao W <xiao.w.wang@intel.com>; Lu, Wenzhuo
> <wenzhuo.lu@intel.com>
> Cc: dev@dpdk.org
> Subject: Re: [dpdk-dev] [PATCH 05/39] net/ixgbe/base: support VF multicast
> promiscuous
>
> On 8/27/2016 4:47 PM, Xiao Wang wrote:
> > Currently, VF is limited to 30 multicast addresses. In order to
> > accommodate more addresses, this patch adds support for VF multicast
> > promiscuous.
>
> It looks like functionality not changed, just
> ixgbevf_update_xcast_mode() moved to ixgbe_mac_operations struct.
>
> Is 30 multicast address limitation remains with this patch?
>
You're right, we have supported this feature in ixgbe_ethdev.c before, now shared
code supports it, so it looks like just a function movement patch.
I will rewrite the commit log to avoid misunderstanding.
> >
> > Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
> > ---
> > drivers/net/ixgbe/base/ixgbe_mbx.h | 2 +-
> > drivers/net/ixgbe/base/ixgbe_type.h | 1 +
> > drivers/net/ixgbe/base/ixgbe_vf.c | 38
> ++++++++++++++++++++++++++++++++
> > drivers/net/ixgbe/base/ixgbe_vf.h | 1 +
> > drivers/net/ixgbe/ixgbe_ethdev.c | 43 ++-----------------------------------
> > 5 files changed, 43 insertions(+), 42 deletions(-)
> >
> > diff --git a/drivers/net/ixgbe/base/ixgbe_mbx.h
> b/drivers/net/ixgbe/base/ixgbe_mbx.h
> > index d775142..c3e301f 100644
> > --- a/drivers/net/ixgbe/base/ixgbe_mbx.h
> > +++ b/drivers/net/ixgbe/base/ixgbe_mbx.h
> > @@ -111,7 +111,7 @@ enum ixgbe_pfvf_api_rev {
> > /* mailbox API, version 1.2 VF requests */
> > #define IXGBE_VF_GET_RETA 0x0a /* VF request for RETA */
> > #define IXGBE_VF_GET_RSS_KEY 0x0b /* get RSS key */
> > -#define IXGBE_VF_UPDATE_XCAST_MODE 0x0C
> > +#define IXGBE_VF_UPDATE_XCAST_MODE 0x0c
> >
> > /* GET_QUEUES return data indices within the mailbox */
> > #define IXGBE_VF_TX_QUEUES 1 /* number of Tx queues
> supported */
> > diff --git a/drivers/net/ixgbe/base/ixgbe_type.h
> b/drivers/net/ixgbe/base/ixgbe_type.h
> > index b2fdfcd..96b5cbd 100644
> > --- a/drivers/net/ixgbe/base/ixgbe_type.h
> > +++ b/drivers/net/ixgbe/base/ixgbe_type.h
> > @@ -3883,6 +3883,7 @@ struct ixgbe_mac_operations {
> > s32 (*init_uta_tables)(struct ixgbe_hw *);
> > void (*set_mac_anti_spoofing)(struct ixgbe_hw *, bool, int);
> > void (*set_vlan_anti_spoofing)(struct ixgbe_hw *, bool, int);
> > + s32 (*update_xcast_mode)(struct ixgbe_hw *, int);
> >
> > /* Flow Control */
> > s32 (*fc_enable)(struct ixgbe_hw *);
> > diff --git a/drivers/net/ixgbe/base/ixgbe_vf.c
> b/drivers/net/ixgbe/base/ixgbe_vf.c
> > index a75074a..20a739c 100644
> > --- a/drivers/net/ixgbe/base/ixgbe_vf.c
> > +++ b/drivers/net/ixgbe/base/ixgbe_vf.c
> > @@ -75,6 +75,7 @@ s32 ixgbe_init_ops_vf(struct ixgbe_hw *hw)
> > hw->mac.ops.set_uc_addr = ixgbevf_set_uc_addr_vf;
> > hw->mac.ops.init_rx_addrs = NULL;
> > hw->mac.ops.update_mc_addr_list = ixgbe_update_mc_addr_list_vf;
> > + hw->mac.ops.update_xcast_mode = ixgbevf_update_xcast_mode;
> > hw->mac.ops.enable_mc = NULL;
> > hw->mac.ops.disable_mc = NULL;
> > hw->mac.ops.clear_vfta = NULL;
> > @@ -419,6 +420,43 @@ s32 ixgbe_update_mc_addr_list_vf(struct ixgbe_hw
> *hw, u8 *mc_addr_list,
> > }
> >
> > /**
> > + * ixgbevf_update_xcast_mode - Update Multicast mode
> > + * @hw: pointer to the HW structure
> > + * @xcast_mode: new multicast mode
> > + *
> > + * Updates the Multicast Mode of VF.
> > + **/
> > +s32 ixgbevf_update_xcast_mode(struct ixgbe_hw *hw, int xcast_mode)
> > +{
> > + struct ixgbe_mbx_info *mbx = &hw->mbx;
> > + u32 msgbuf[2];
> > + s32 err;
> > +
> > + switch (hw->api_version) {
> > + case ixgbe_mbox_api_12:
> > + break;
> > + default:
> > + return IXGBE_ERR_FEATURE_NOT_SUPPORTED;
> > + }
> > +
> > + msgbuf[0] = IXGBE_VF_UPDATE_XCAST_MODE;
> > + msgbuf[1] = xcast_mode;
> > +
> > + err = mbx->ops.write_posted(hw, msgbuf, 2, 0);
> > + if (err)
> > + return err;
> > +
> > + err = mbx->ops.read_posted(hw, msgbuf, 2, 0);
> > + if (err)
> > + return err;
> > +
> > + msgbuf[0] &= ~IXGBE_VT_MSGTYPE_CTS;
> > + if (msgbuf[0] == (IXGBE_VF_UPDATE_XCAST_MODE |
> IXGBE_VT_MSGTYPE_NACK))
>
> What if other flags set in msgbuf[0]
> Please check 18/39 patch, which fixes something similar to this
>
This condition should be as (msgbuf[0] == original value of msgbuf[0] | NACK ),
It's what the 18/39 patch fixes. No such issue for this function.
Thanks,
Xiao
>
> > + return IXGBE_ERR_FEATURE_NOT_SUPPORTED;
> > + return IXGBE_SUCCESS;
> > +}
> > +
next prev parent reply other threads:[~2016-09-23 3:35 UTC|newest]
Thread overview: 107+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-27 15:47 [dpdk-dev] [PATCH 00/39] net/ixgbe: base code update Xiao Wang
2016-08-27 15:47 ` [dpdk-dev] [PATCH 01/39] net/ixgbe/base: fix delta check for setting VFTA Xiao Wang
2016-09-19 17:00 ` Ferruh Yigit
2016-09-22 15:58 ` Wang, Xiao W
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 00/40] net/ixgbe: base code update Xiao Wang
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 01/40] net/ixgbe/base: fix delta check for setting VFTA Xiao Wang
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 02/40] net/ixgbe/base: remove X550em SFP iXFI setup Xiao Wang
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 03/40] net/ixgbe/base: change endianness of PHY data Xiao Wang
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 04/40] net/ixgbe/base: add X550em_a 10G PHY support Xiao Wang
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 05/40] net/ixgbe/base: move vf_update_xcast_mode to base code Xiao Wang
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 06/40] net/ixgbe/base: introduce new ops init functions Xiao Wang
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 07/40] net/ixgbe/base: separate PHY probe code Xiao Wang
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 08/40] net/ixgbe/base: fully initialize X550em_a 1G PHYs Xiao Wang
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 09/40] net/ixgbe/base: add macros for VF promiscuous mode Xiao Wang
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 10/40] net/ixgbe/base: add FC setup for X550em_a fiber Xiao Wang
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 11/40] net/ixgbe/base: add FC autoneg " Xiao Wang
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 12/40] net/ixgbe/base: clear page register in error path Xiao Wang
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 13/40] net/ixgbe/base: configure DMAC for 10Mb operation Xiao Wang
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 14/40] net/ixgbe/base: fix function comments about X550 Xiao Wang
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 15/40] net/ixgbe/base: report setting LPE register error Xiao Wang
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 16/40] net/ixgbe/base: bump mailbox version Xiao Wang
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 17/40] net/ixgbe/base: access IOSF by host interface Xiao Wang
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 18/40] net/ixgbe/base: fix check on NACK Xiao Wang
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 19/40] net/ixgbe/base: define X550 PCIe serial MAC addr Xiao Wang
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 20/40] net/ixgbe/base: bypass checking link for crosstalk Xiao Wang
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 21/40] net/ixgbe/base: support X550em_a SGMII FC autoneg Xiao Wang
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 22/40] net/ixgbe/base: add macros for GENEVE UDP port Xiao Wang
2016-09-25 9:00 ` [dpdk-dev] [PATCH v2 23/40] net/ixgbe/base: add bound check in LED functions Xiao Wang
2016-09-25 9:00 ` [dpdk-dev] [PATCH v2 24/40] net/ixgbe/base: use default check link function Xiao Wang
2016-09-25 9:00 ` [dpdk-dev] [PATCH v2 25/40] net/ixgbe/base: set default autoneg speed at reset Xiao Wang
2016-09-25 9:00 ` [dpdk-dev] [PATCH v2 26/40] net/ixgbe/base: add missing FDIRSCTPM mask setting Xiao Wang
2016-09-25 9:00 ` [dpdk-dev] [PATCH v2 27/40] net/ixgbe/base: commonize mailbox write and read Xiao Wang
2016-09-25 9:00 ` [dpdk-dev] [PATCH v2 28/40] net/ixgbe/base: reduce delay for SWFW semaphore Xiao Wang
2016-09-25 9:00 ` [dpdk-dev] [PATCH v2 29/40] net/ixgbe/base: report autoneg supported for X550 Xiao Wang
2016-09-25 9:00 ` [dpdk-dev] [PATCH v2 30/40] net/ixgbe/base: remove X550em_a 100Mbps support Xiao Wang
2016-09-25 9:00 ` [dpdk-dev] [PATCH v2 31/40] net/ixgbe/base: unify link speed value Xiao Wang
2016-09-25 9:00 ` [dpdk-dev] [PATCH v2 32/40] net/ixgbe/base: separate ops init from PHY init Xiao Wang
2016-09-25 9:00 ` [dpdk-dev] [PATCH v2 33/40] net/ixgbe/base: add X550em_a FW ALEF support Xiao Wang
2016-09-25 9:00 ` [dpdk-dev] [PATCH v2 34/40] net/ixgbe/base: add two MAC ops for Hyper-V Xiao Wang
2016-09-25 9:00 ` [dpdk-dev] [PATCH v2 35/40] net/ixgbe/base: hold semaphore for shadow RAM access Xiao Wang
2016-09-25 9:00 ` [dpdk-dev] [PATCH v2 36/40] net/ixgbe/base: update X550em_a backplane speed Xiao Wang
2016-09-25 9:00 ` [dpdk-dev] [PATCH v2 37/40] net/ixgbe/base: clean code of flow control autoneg Xiao Wang
2016-09-25 9:00 ` [dpdk-dev] [PATCH v2 38/40] net/ixgbe/base: do not skip PHY configuration Xiao Wang
2016-09-25 9:00 ` [dpdk-dev] [PATCH v2 39/40] net/ixgbe/base: clean up Xiao Wang
2016-09-25 9:00 ` [dpdk-dev] [PATCH v2 40/40] net/ixgbe/base: add base driver update brief Xiao Wang
2016-09-26 2:06 ` [dpdk-dev] [PATCH v2 00/40] net/ixgbe: base code update Lu, Wenzhuo
2016-09-28 15:31 ` Bruce Richardson
2016-08-27 15:47 ` [dpdk-dev] [PATCH 02/39] net/ixgbe/base: remove X550em SFP iXFI setup Xiao Wang
2016-09-19 17:01 ` Ferruh Yigit
2016-08-27 15:47 ` [dpdk-dev] [PATCH 03/39] net/ixgbe/base: change endianness of PHY data Xiao Wang
2016-09-19 17:01 ` Ferruh Yigit
2016-09-25 0:36 ` Wang, Xiao W
2016-08-27 15:47 ` [dpdk-dev] [PATCH 04/39] net/ixgbe/base: add X550em_a 10G PHY support Xiao Wang
2016-08-27 15:47 ` [dpdk-dev] [PATCH 05/39] net/ixgbe/base: support VF multicast promiscuous Xiao Wang
2016-09-19 17:05 ` Ferruh Yigit
2016-09-23 3:35 ` Wang, Xiao W [this message]
2016-08-27 15:47 ` [dpdk-dev] [PATCH 06/39] net/ixgbe/base: introduce new ops init functions Xiao Wang
2016-08-27 15:47 ` [dpdk-dev] [PATCH 07/39] net/ixgbe/base: separate PHY probe code Xiao Wang
2016-08-27 15:47 ` [dpdk-dev] [PATCH 08/39] net/ixgbe/base: fully initialize X550em_a 1G PHYs Xiao Wang
2016-08-27 15:47 ` [dpdk-dev] [PATCH 09/39] net/ixgbe/base: add macros for VF promiscuous mode Xiao Wang
2016-08-27 15:47 ` [dpdk-dev] [PATCH 10/39] net/ixgbe/base: add FC setup for X550em_a fiber Xiao Wang
2016-08-27 15:47 ` [dpdk-dev] [PATCH 11/39] net/ixgbe/base: add FC autoneg " Xiao Wang
2016-08-27 15:47 ` [dpdk-dev] [PATCH 12/39] net/ixgbe/base: clear page register in error path Xiao Wang
2016-08-27 15:47 ` [dpdk-dev] [PATCH 13/39] net/ixgbe/base: configure DMAC for 10Mb operation Xiao Wang
2016-08-27 15:47 ` [dpdk-dev] [PATCH 14/39] net/ixgbe/base: fix function comments about X550 Xiao Wang
2016-08-27 15:47 ` [dpdk-dev] [PATCH 15/39] net/ixgbe/base: report setting LPE register error Xiao Wang
2016-08-27 15:47 ` [dpdk-dev] [PATCH 16/39] net/ixgbe/base: bump mailbox version Xiao Wang
2016-09-19 17:03 ` Ferruh Yigit
2016-09-23 3:50 ` Wang, Xiao W
2016-08-27 15:48 ` [dpdk-dev] [PATCH 17/39] net/ixgbe/base: access IOSF by host interface Xiao Wang
2016-09-19 17:04 ` Ferruh Yigit
2016-09-23 5:16 ` Wang, Xiao W
2016-08-27 15:48 ` [dpdk-dev] [PATCH 18/39] net/ixgbe/base: fix check on NACK Xiao Wang
2016-09-19 17:07 ` Ferruh Yigit
2016-09-23 6:05 ` Wang, Xiao W
2016-08-27 15:48 ` [dpdk-dev] [PATCH 19/39] net/ixgbe/base: define X550 PCIe serial MAC addr Xiao Wang
2016-08-27 15:48 ` [dpdk-dev] [PATCH 20/39] net/ixgbe/base: bypass checking link for crosstalk Xiao Wang
2016-08-27 15:48 ` [dpdk-dev] [PATCH 21/39] net/ixgbe/base: support X550em_a SGMII FC autoneg Xiao Wang
2016-08-27 15:48 ` [dpdk-dev] [PATCH 22/39] net/ixgbe/base: add macros for GENEVE UDP port Xiao Wang
2016-08-27 15:48 ` [dpdk-dev] [PATCH 23/39] net/ixgbe/base: add bound check in LED functions Xiao Wang
2016-09-19 17:06 ` Ferruh Yigit
2016-09-22 16:08 ` Wang, Xiao W
2016-08-27 15:48 ` [dpdk-dev] [PATCH 24/39] net/ixgbe/base: use default check link function Xiao Wang
2016-08-27 15:48 ` [dpdk-dev] [PATCH 25/39] net/ixgbe/base: set default autoneg speed at reset Xiao Wang
2016-08-27 15:48 ` [dpdk-dev] [PATCH 26/39] net/ixgbe/base: add missing FDIRSCTPM mask setting Xiao Wang
2016-08-27 15:48 ` [dpdk-dev] [PATCH 27/39] net/ixgbe/base: commonize mailbox write and read Xiao Wang
2016-08-27 15:48 ` [dpdk-dev] [PATCH 28/39] net/ixgbe/base: reduce delay for SWFW semaphore Xiao Wang
2016-08-27 15:48 ` [dpdk-dev] [PATCH 29/39] net/ixgbe/base: report autoneg supported for X550 Xiao Wang
2016-09-19 17:07 ` Ferruh Yigit
2016-09-23 0:59 ` Wang, Xiao W
2016-08-27 15:48 ` [dpdk-dev] [PATCH 30/39] net/ixgbe/base: remove X550em_a 100Mbps support Xiao Wang
2016-08-27 15:48 ` [dpdk-dev] [PATCH 31/39] net/ixgbe/base: unify link speed value Xiao Wang
2016-08-27 15:48 ` [dpdk-dev] [PATCH 32/39] net/ixgbe/base: separate ops init from PHY init Xiao Wang
2016-08-27 15:48 ` [dpdk-dev] [PATCH 33/39] net/ixgbe/base: add X550em_a FW ALEF support Xiao Wang
2016-09-19 17:07 ` Ferruh Yigit
2016-09-22 2:56 ` Lu, Wenzhuo
2016-09-23 6:47 ` Wang, Xiao W
2016-08-27 15:48 ` [dpdk-dev] [PATCH 34/39] net/ixgbe/base: add two MAC ops for Hyper-V Xiao Wang
2016-08-27 15:48 ` [dpdk-dev] [PATCH 35/39] net/ixgbe/base: hold semaphore for shadow RAM access Xiao Wang
2016-09-19 17:08 ` Ferruh Yigit
2016-09-23 8:06 ` Wang, Xiao W
2016-08-27 15:48 ` [dpdk-dev] [PATCH 36/39] net/ixgbe/base: update X550em_a backplane speed Xiao Wang
2016-08-27 15:48 ` [dpdk-dev] [PATCH 37/39] net/ixgbe/base: clean code of flow control autoneg Xiao Wang
2016-08-27 15:48 ` [dpdk-dev] [PATCH 38/39] net/ixgbe/base: do not skip PHY configuration Xiao Wang
2016-08-27 15:48 ` [dpdk-dev] [PATCH 39/39] net/ixgbe/base: add base driver update brief Xiao Wang
2016-09-19 17:08 ` Ferruh Yigit
2016-09-22 2:55 ` Lu, Wenzhuo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=B7F2E978279D1D49A3034B7786DACF406C21F96D@SHSMSX101.ccr.corp.intel.com \
--to=xiao.w.wang@intel.com \
--cc=dev@dpdk.org \
--cc=ferruh.yigit@intel.com \
--cc=wenzhuo.lu@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).