From: "Huang, ZhiminX" <zhiminx.huang@intel.com>
To: "Chen, LingliX" <linglix.chen@intel.com>, "dts@dpdk.org" <dts@dpdk.org>
Subject: RE: [dts][PATCH V1 1/5] test_plans/generic_flow_api: add pf action subcase
Date: Tue, 6 Dec 2022 03:21:40 +0000 [thread overview]
Message-ID: <BN0PR11MB57122852E2B5C7334C34691DFD1B9@BN0PR11MB5712.namprd11.prod.outlook.com> (raw)
In-Reply-To: <20221130080439.65529-2-linglix.chen@intel.com>
> -----Original Message-----
> From: Chen, LingliX <linglix.chen@intel.com>
> Sent: Wednesday, November 30, 2022 4:05 PM
> To: dts@dpdk.org
> Cc: Huang, ZhiminX <zhiminx.huang@intel.com>; Chen, LingliX
> <linglix.chen@intel.com>
> Subject: [dts][PATCH V1 1/5] test_plans/generic_flow_api: add pf action
> subcase
>
> 1. According to dpdk commit 5007ac1318 (ethdev: remove deprecated Flow
> Director configuration)
> remove --pkt-filter-mode.
> 2. This dpdk commit (5007ac1318) also removed '--pkt-filter-report-hash', so
> test_fdir_for_match_report no need test on NNT.
> 3. add 5 pf action subcase (bind the pf to vfio-pci).
> 4. According to dpdk commit 5c45fde3e9 (ethdev: remove deprecated flow
> item VF)
> remove fdir_wrong_parameters case create vf rule part.
>
> Signed-off-by: Lingli Chen <linglix.chen@intel.com>
> ---
> test_plans/generic_flow_api_test_plan.rst | 404 ++++++++++++++--------
> 1 file changed, 259 insertions(+), 145 deletions(-)
>
> diff --git a/test_plans/generic_flow_api_test_plan.rst
> b/test_plans/generic_flow_api_test_plan.rst
> index 2da0c9f5..d766232b 100644
> --- a/test_plans/generic_flow_api_test_plan.rst
> +++ b/test_plans/generic_flow_api_test_plan.rst
> @@ -17,7 +17,7 @@ Prerequisites
>
> 3. bind the pf to dpdk driver::
>
> - ./usertools/dpdk-devbind.py -b igb_uio 05:00.0
> + ./usertools/dpdk-devbind.py -b igb_uio/vfio-pci 05:00.0
>
> Note: validate the rules first before create it in each case.
> All the rules that can be validated correctly should be created successfully.
> @@ -70,7 +70,7 @@ Test case: Intel® Ethernet 700 Series fdir for L2 payload
>
> 1. Launch the app ``testpmd`` with the following arguments::
>
> - ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 1ffff -n 4 -a 05:00.0
> --file-prefix=pf --socket-mem=1024,1024 -- -i --rxq=16 --txq=16 --disable-rss
> --pkt-filter-mode=perfect
> + ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 1ffff -n 4 -a
> + 05:00.0 --file-prefix=pf --socket-mem=1024,1024 -- -i --rxq=16
> + --txq=16 --disable-rss
> testpmd> set fwd rxonly
> testpmd> set verbose 1
> testpmd> start
> @@ -104,7 +104,7 @@ Test case: Intel® Ethernet 700 Series fdir for flexbytes
>
> 1. Launch the app ``testpmd`` with the following arguments::
>
> - ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 1ffff -n 4 -a 05:00.0
> --file-prefix=pf --socket-mem=1024,1024 -- -i --rxq=16 --txq=16 --disable-rss
> --pkt-filter-mode=perfect
> + ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 1ffff -n 4 -a
> + 05:00.0 --file-prefix=pf --socket-mem=1024,1024 -- -i --rxq=16
> + --txq=16 --disable-rss
> testpmd> set fwd rxonly
> testpmd> set verbose 1
> testpmd> start
> @@ -188,17 +188,17 @@ Test case: Intel® Ethernet 700 Series fdir for ipv4
>
> 1. Launch the app ``testpmd`` with the following arguments::
>
> - ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 1ffff -n 4 -a 05:00.0
> --file-prefix=pf --socket-mem=1024,1024 -- -i --rxq=16 --txq=16 --disable-rss
> --pkt-filter-mode=perfect
> + ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 1ffff -n 4 -a
> + 05:00.0 --file-prefix=pf --socket-mem=1024,1024 -- -i --rxq=16
> + --txq=16 --disable-rss
> testpmd> set fwd rxonly
> testpmd> set verbose 1
> testpmd> start
>
> - ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 1e0000 -n 4 -a 05:02.0
> --file-prefix=vf0 --socket-mem=1024,1024 -- -i --rxq=4 --txq=4 --disable-rss
> --pkt-filter-mode=perfect
> + ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 1e0000 -n 4 -a
> + 05:02.0 --file-prefix=vf0 --socket-mem=1024,1024 -- -i --rxq=4 --txq=4
> + --disable-rss
> testpmd> set fwd rxonly
> testpmd> set verbose 1
> testpmd> start
>
> - ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 1e00000 -n 4 -a
> 05:02.1 --file-prefix=vf1 --socket-mem=1024,1024 -- -i --rxq=4 --txq=4
> --disable-rss --pkt-filter-mode=perfect
> + ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 1e00000 -n 4 -a
> + 05:02.1 --file-prefix=vf1 --socket-mem=1024,1024 -- -i --rxq=4 --txq=4
> + --disable-rss
> testpmd> set fwd rxonly
> testpmd> set verbose 1
> testpmd> start
> @@ -280,6 +280,68 @@ Test case: Intel® Ethernet 700 Series fdir for ipv4
> testpmd> flow flush 0
> testpmd> flow list 0
>
> +Sub-case: fdir for ipv4 (bind the pf to vfio-pci)
> +-------------------------------------------------
The structure of testplan should be:
TestCase: xxx
Subcase1: xxxx
Subcase2:xxxxx
> +
> +1. Launch the app ``testpmd`` with the following arguments::
> +
> + ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 1ffff -n 4 -a 05:00.0
> --file-prefix=pf --socket-mem=1024,1024 -- -i --rxq=16 --txq=16 --disable-rss
> + testpmd> set fwd rxonly
> + testpmd> set verbose 1
> + testpmd> start
> +
> +2. validate and create the filter rules::
> +
> + testpmd> flow validate 0 ingress pattern eth / ipv4 dst is
> 157.141.168.166 src is 86.233.197.55 proto is 255 / end actions queue index
> 2 / end
> + testpmd> flow validate 0 ingress pattern eth / ipv4 dst is 144.91.80.195
> src is 244.178.159.128 ttl is 131 / udp dst is 63365 src is 62851 / end actions
> queue index 2 / end
> + testpmd> flow validate 0 ingress pattern eth / ipv4 dst is 38.114.30.109
> src is 42.1.193.75 tos is 93 / tcp dst is 9460 src is 58942 / end actions queue
> index 3 / end
> + testpmd> flow validate 0 ingress pattern eth / vlan tci is 3691 / ipv4 dst is
> 58.172.170.63 src is 203.118.95.141 tos is 211 ttl is 56 / sctp dst is 51725 src is
> 43652 tag is 1 / end actions queue index 8 / end
> + testpmd> flow validate 0 ingress pattern eth / vlan tci is 434 / ipv4 dst is
> 71.116.114.22 src is 173.153.191.177 tos is 2 ttl is 37 / sctp dst is 17941 src is
> 38115 tag is 1 / end actions drop / end
> + testpmd> flow validate 0 ingress pattern eth / vlan tci is 3287 / ipv4 dst is
> 219.249.106.92 src is 42.187.118.192 tos is 25 ttl is 161 / sctp dst is 5762 src is
> 58896 tag is 1 / end actions passthru / flag / end
> + testpmd> flow validate 0 ingress pattern eth / ipv4 dst is 29.191.154.55
> src is 69.31.207.25 ttl is 134 / udp dst is 997 src is 42348 / end actions queue
> index 1 / flag / end
> + testpmd> flow validate 0 ingress pattern eth / ipv4 dst is 53.166.31.5 src
> is 158.221.82.64 tos is 90 / tcp dst is 28429 src is 36277 / end actions queue
> index 7 / mark id 3 / end
> + testpmd> flow validate 0 ingress pattern eth / ipv4 dst is
> + 195.39.132.177 src is 65.239.163.18 proto is 255 / end actions
> + passthru / mark id 3 / end
> +
> + testpmd> flow create 0 ingress pattern eth / ipv4 dst is 33.178.41.216
> src is 157.159.41.179 proto is 255 / end actions queue index 1 / end
> + testpmd> flow create 0 ingress pattern eth / ipv4 dst is 141.4.179.232
> src is 38.102.237.108 ttl is 47 / udp dst is 50235 src is 55057 / end actions
> queue index 2 / end
> + testpmd> flow create 0 ingress pattern eth / ipv4 dst is 109.167.0.48 src
> is 2.233.109.45 tos is 130 / tcp dst is 20779 src is 64541 / end actions queue
> index 3 / end
> + testpmd> flow create 0 ingress pattern eth / vlan tci is 1881 / ipv4 dst is
> 100.140.14.188 src is 210.226.229.15 tos is 105 ttl is 190 / sctp dst is 62829 src
> is 39503 tag is 1 / end actions queue index 4 / end
> + testpmd> flow create 0 ingress pattern eth / vlan tci is 3893 / ipv4 dst is
> 141.77.203.35 src is 99.49.193.226 tos is 227 ttl is 22 / sctp dst is 33682 src is
> 22991 tag is 1 / end actions drop / end
> + testpmd> flow create 0 ingress pattern eth / vlan tci is 1575 / ipv4 dst is
> 160.99.116.93 src is 123.114.110.144 tos is 21 ttl is 72 / sctp dst is 31363 src is
> 34136 tag is 1 / end actions passthru / flag / end
> + testpmd> flow create 0 ingress pattern eth / ipv4 dst is 213.99.143.236
> src is 55.130.28.195 ttl is 201 / udp dst is 25119 src is 31609 / end actions
> queue index 5 / flag / end
> + testpmd> flow create 0 ingress pattern eth / ipv4 dst is 224.12.140.222
> src is 118.34.141.171 tos is 41 / tcp dst is 32602 src is 17691 / end actions
> queue index 6 / mark id 3 / end
> + testpmd> flow create 0 ingress pattern eth / ipv4 dst is
> + 124.168.113.3 src is 253.237.216.240 proto is 255 / end actions
> + passthru / mark id 3 / end
> +
> +3. send packets::
> +
> + pkt1 = Ether(dst='3c:fd:fe:9c:5b:b8')/IP(dst='33.178.41.216',
> src='157.159.41.179', proto=255)/Raw('x' * 20)
> + pkt2 = Ether(dst='3c:fd:fe:9c:5b:b8')/IP(dst='141.4.179.232',
> src='38.102.237.108', ttl=47)/UDP(dport=50235, sport=55057)/Raw('x' * 20)
> + pkt3 = Ether(dst='3c:fd:fe:9c:5b:b8')/IP(dst='109.167.0.48',
> src='2.233.109.45', tos=130)/TCP(dport=20779, sport=64541)/Raw('x' * 20)
> + pkt4 =
> Ether(dst='3c:fd:fe:9c:5b:b8')/Dot1Q(vlan=1881)/IP(dst='100.140.14.188',
> src='210.226.229.15', tos=105, ttl=190)/SCTP(dport=62829, sport=39503,
> tag=1)/Raw('x' * 20)
> + pkt5 =
> Ether(dst='3c:fd:fe:9c:5b:b8')/Dot1Q(vlan=3893)/IP(dst='141.77.203.35',
> src='99.49.193.226', tos=227, ttl=22)/SCTP(dport=33682, sport=22991,
> tag=1)/Raw('x' * 20)
> + pkt6 =
> Ether(dst='3c:fd:fe:9c:5b:b8')/Dot1Q(vlan=1575)/IP(dst='160.99.116.93',
> src='123.114.110.144', tos=21, ttl=72)/SCTP(dport=31363, sport=34136,
> tag=1)/Raw('x' * 20)
> + pkt7 = Ether(dst='3c:fd:fe:9c:5b:b8')/IP(dst='213.99.143.236',
> src='55.130.28.195', ttl=201)/UDP(dport=25119, sport=31609)/Raw('x' * 20)
> + pkt8 = Ether(dst='3c:fd:fe:9c:5b:b8')/IP(dst='224.12.140.222',
> src='118.34.141.171', tos=41)/TCP(dport=32602, sport=17691)/Raw('x' * 20)
> + pkt9 = Ether(dst='3c:fd:fe:9c:5b:b8')/IP(dst='124.168.113.3',
> src='253.237.216.240', proto=255)/Raw('x' * 20)
> + pkt10 = Ether(dst="3c:fd:fe:9c:5b:b8")/IP(src="192.168.0.3",
> + dst="192.168.0.4", proto=255)/Raw("x" * 20)
> +
> + verify packet
> + pkt1 to queue 1, pkt2 to queue 2, pkt3 to queue 3, pkt4 to queue 4, pkt5
> can't be received,
> + pkt6/9/10 to queue 0, pkt7 to queue 5, pkt8 to queue 6.
> +
> +4. verify rules can be listed and destroyed::
> +
> + testpmd> flow list 0
> + ID Group Prio Attr Rule
> + 0 0 0 i-- ETH IPV4 => QUEUE
> + 1 0 0 i-- ETH IPV4 UDP => QUEUE
> + 2 0 0 i-- ETH IPV4 TCP => QUEUE
> + 3 0 0 i-- ETH VLAN IPV4 SCTP => QUEUE
> + 4 0 0 i-- ETH VLAN IPV4 SCTP => DROP
> + 5 0 0 i-- ETH VLAN IPV4 SCTP => PASSTHRU
> FLAG
> + 6 0 0 i-- ETH IPV4 UDP => QUEUE FLAG
> + 7 0 0 i-- ETH IPV4 TCP => QUEUE MARK
> + 8 0 0 i-- ETH IPV4 => PASSTHRU MARK
>
> Test case: Intel® Ethernet 700 Series fdir for ipv6
> ===================================================
> @@ -293,17 +355,17 @@ Test case: Intel® Ethernet 700 Series fdir for ipv6
>
> 1. Launch the app ``testpmd`` with the following arguments::
>
> - ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 1ffff -n 4 -a 05:00.0
> --file-prefix=pf --socket-mem=1024,1024 -- -i --rxq=16 --txq=16 --disable-rss
> --pkt-filter-mode=perfect
> + ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 1ffff -n 4 -a
> + 05:00.0 --file-prefix=pf --socket-mem=1024,1024 -- -i --rxq=16
> + --txq=16 --disable-rss
> testpmd> set fwd rxonly
> testpmd> set verbose 1
> testpmd> start
>
> - ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 1e0000 -n 4 -a 05:02.0
> --file-prefix=vf0 --socket-mem=1024,1024 -- -i --rxq=4 --txq=4 --disable-rss
> --pkt-filter-mode=perfect
> + ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 1e0000 -n 4 -a
> + 05:02.0 --file-prefix=vf0 --socket-mem=1024,1024 -- -i --rxq=4 --txq=4
> + --disable-rss
> testpmd> set fwd rxonly
> testpmd> set verbose 1
> testpmd> start
>
> - ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 1e00000 -n 4 -a
> 05:02.1 --file-prefix=vf1 --socket-mem=1024,1024 -- -i --rxq=4 --txq=4
> --disable-rss --pkt-filter-mode=perfect
> + ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 1e00000 -n 4 -a
> + 05:02.1 --file-prefix=vf1 --socket-mem=1024,1024 -- -i --rxq=4 --txq=4
> + --disable-rss
> testpmd> set fwd rxonly
> testpmd> set verbose 1
> testpmd> start
> @@ -366,6 +428,53 @@ Test case: Intel® Ethernet 700 Series fdir for ipv6
> testpmd> flow flush 0
> testpmd> flow list 0
>
> +Sub-case: fdir for ipv6 (bind the pf to vfio-pci)
> +-------------------------------------------------
> +
> +1. Launch the app ``testpmd`` with the following arguments::
> +
> + ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 1ffff -n 4 -a 05:00.0
> --file-prefix=pf --socket-mem=1024,1024 -- -i --rxq=16 --txq=16 --disable-rss
> + testpmd> set fwd rxonly
> + testpmd> set verbose 1
> + testpmd> start
> +
> +2. validate and create the filter rules::
> +
> + testpmd> flow validate 0 ingress pattern eth / vlan tci is 1615 / ipv6 src is
> f47e:d08c:3856:2e75:2f6b:7b92:c5ee:8f3c dst is
> 3d29:55bc:c137:3bd9:32b6:afe7:2db6:358f proto is 255 tc is 31 hop is 47 /
> end actions queue index 0 / end
> + testpmd> flow validate 0 ingress pattern eth / vlan tci is 2144 / ipv6 src is
> 776c:1445:230:8421:7813:c142:5eab:3224 dst is
> 32c0:348d:90c:cd0a:5e7:f950:6db9:f686 tc is 70 hop is 185 / udp dst is 18871
> src is 40861 / end actions queue index 7 / end
> + testpmd> flow validate 0 ingress pattern eth / vlan tci is 827 / ipv6 src is
> 79a1:1122:ab30:112:bbc4:f043:a68b:2261 dst is
> 14a4:d730:69d1:d6b3:f39a:6f9c:398e:e510 tc is 245 hop is 72 / tcp dst is 63094
> src is 13170 / end actions queue index 15 / end
> + testpmd> flow validate 0 ingress pattern eth / vlan tci is 1063 / ipv6 src is
> cb74:80d7:c1fd:b5ad:1016:1b4d:29a6:24f1 dst is
> 22c9:69f:a52d:6826:3f95:5ac:be54:f88c tc is 216 hop is 180 / sctp dst is 2661
> src is 24787 tag is 1 / end actions queue index 1 / end
> + testpmd> flow validate 0 ingress pattern eth / vlan tci is 2212 /
> + ipv6 src is a457:e86a:a531:d6d1:af33:c06a:b1f6:e96f dst is
> + f13b:3245:f84f:af9c:42b7:cd48:63c:c168 tc is 243 hop is 11 / sctp dst
> + is 31788 src is 10570 tag is 1 / end actions drop / end
> +
> + testpmd> flow create 0 ingress pattern eth / vlan tci is 120 / ipv6 src is
> 3a69:6b77:3c17:87b:dad1:3559:c2d4:f8f9 dst is
> f15e:7045:9ce9:c217:5cda:8710:6704:1166 proto is 255 tc is 63 hop is 175 /
> end actions queue index 1 / end
> + testpmd> flow create 0 ingress pattern eth / vlan tci is 1438 / ipv6 src is
> 3d0a:40ca:7efa:6501:f13e:5559:a3da:fab dst is
> 23f5:1:fe7d:c59e:160b:22ec:f102:82c5 tc is 107 hop is 34 / udp dst is 46416 src
> is 57148 / end actions queue index 2 / end
> + testpmd> flow create 0 ingress pattern eth / vlan tci is 78 / ipv6 src is
> 4701:9a42:995:f2c:b75a:87eb:8dde:991d dst is
> 24ec:dd03:991d:5fb6:5e07:47ba:531a:e897 tc is 180 hop is 137 / tcp dst is
> 3940 src is 52731 / end actions queue index 3 / end
> + testpmd> flow create 0 ingress pattern eth / vlan tci is 59 / ipv6 src is
> caeb:64ff:2216:5334:16df:e93c:c5f5:9680 dst is
> 46a:6625:57f9:915:19a6:ecc7:3131:f702 tc is 52 hop is 253 / sctp dst is 48514
> src is 49861 tag is 1 / end actions queue index 4 / end
> + testpmd> flow create 0 ingress pattern eth / vlan tci is 4014 /
> + ipv6 src is a484:b7d9:ee51:e67c:d668:6304:f612:b814 dst is
> + 8ff1:1185:2084:454d:ff90:a7b1:675d:31c4 tc is 248 hop is 22 / sctp dst
> + is 54472 src is 48229 tag is 1 / end actions drop / end
> +
> +
> +3. send packets::
> +
> + pkt1 =
> Ether(dst='3c:fd:fe:9c:5b:b8')/Dot1Q(vlan=120)/IPv6(src='3a69:6b77:3c17:87b:
> dad1:3559:c2d4:f8f9', dst='f15e:7045:9ce9:c217:5cda:8710:6704:1166',
> nh=255, tc=63, hlim=175)/Raw('x' * 20)
> + pkt2 =
> Ether(dst='3c:fd:fe:9c:5b:b8')/Dot1Q(vlan=1438)/IPv6(src='3d0a:40ca:7efa:650
> 1:f13e:5559:a3da:fab', dst='23f5:1:fe7d:c59e:160b:22ec:f102:82c5', tc=107,
> hlim=34)/UDP(dport=46416, sport=57148)/Raw('x' * 20)
> + pkt3 =
> Ether(dst='3c:fd:fe:9c:5b:b8')/Dot1Q(vlan=78)/IPv6(src='4701:9a42:995:f2c:b7
> 5a:87eb:8dde:991d', dst='24ec:dd03:991d:5fb6:5e07:47ba:531a:e897', tc=180,
> hlim=137)/TCP(dport=3940, sport=52731)/Raw('x' * 20)
> + pkt4 =
> Ether(dst='3c:fd:fe:9c:5b:b8')/Dot1Q(vlan=59)/IPv6(src='caeb:64ff:2216:5334:1
> 6df:e93c:c5f5:9680', dst='46a:6625:57f9:915:19a6:ecc7:3131:f702', tc=52,
> hlim=253, nh=132)/SCTP(dport=48514, sport=49861, tag=1)/Raw('x' * 20)
> + pkt5 =
> Ether(dst="3c:fd:fe:9c:5b:b8")/Dot1Q(vlan=1438)/IPv6(src="2001::1",
> dst="2001::2", tc=2, hlim=20)/UDP(sport=22,dport=23)/Raw("x" * 20)
> + pkt6 =
> + Ether(dst="3c:fd:fe:9c:5b:b8")/Dot1Q(vlan=2734)/IPv6(src="2001::1",
> + dst="2001::2", tc=2, hlim=20)/UDP(sport=22,dport=23)/Raw("x" * 20)
> +
> + verify packet
> + pkt1 to queue 1, pkt2 to queue 2, pkt3 to queue 3, pkt4 to queue 4, pkt5
> can't be received, pkt6 to queue 0.
> +
> +4. verify rules can be listed and destroyed::
> +
> + testpmd> flow list 0
> + ID Group Prio Attr Rule
> + 0 0 0 i-- ETH VLAN IPV6 => QUEUE
> + 1 0 0 i-- ETH VLAN IPV6 UDP => QUEUE
> + 2 0 0 i-- ETH VLAN IPV6 TCP => QUEUE
> + 3 0 0 i-- ETH VLAN IPV6 SCTP => QUEUE
> + 4 0 0 i-- ETH VLAN IPV6 SCTP => DROP
> +
> Test case: Intel® Ethernet 700 Series fdir for vlan
> ===================================================
>
> @@ -383,12 +492,15 @@ Prerequisites:
> testpmd> set verbose 1
> testpmd> start
>
> - ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 1e0000 -n 4 -a 05:02.0
> --file-prefix=vf0 --socket-mem=1024,1024 --legacy-mem -- -i --rxq=4 --txq=4
> --disable-rss --pkt-filter-mode=perfect
> + if the i40e firmware version >= 8.4 the dpdk can only add 'extend on' to
> make the single VLAN filter work normally:
> + testpmd> vlan set extend on 0
> +
> + ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 1e0000 -n 4 -a
> + 05:02.0 --file-prefix=vf0 --socket-mem=1024,1024 --legacy-mem -- -i
> + --rxq=4 --txq=4 --disable-rss
> testpmd> set fwd rxonly
> testpmd> set verbose 1
> testpmd> start
>
> - ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 1e00000 -n 4 -a
> 05:02.1 --file-prefix=vf1 --socket-mem=1024,1024 --legacy-mem -- -i --rxq=4
> --txq=4 --disable-rss --pkt-filter-mode=perfect
> + ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 1e00000 -n 4 -a
> + 05:02.1 --file-prefix=vf1 --socket-mem=1024,1024 --legacy-mem -- -i
> + --rxq=4 --txq=4 --disable-rss
> testpmd> set fwd rxonly
> testpmd> set verbose 1
> testpmd> start
> @@ -505,12 +617,49 @@ Prerequisites:
> testpmd> flow flush 0
> testpmd> flow list 0
>
> +Sub-case: fdir for vlan (bind the pf to vfio-pci)
> +-------------------------------------------------
> +
> +1. Launch the app ``testpmd`` with the following arguments::
> +
> + ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 1ffff -n 4 -a 05:00.0
> --file-prefix=pf --socket-mem=1024,1024 --legacy-mem -- -i --rxq=16 --txq=16
> --disable-rss
> + testpmd> set fwd rxonly
> + testpmd> set verbose 1
> + testpmd> start
> +
> + if the i40e firmware version >= 8.4 the dpdk can only add 'extend on' to
> make the single VLAN filter work normally:
> + testpmd> vlan set extend on 0
> +
> +2. create and validated filter rules::
> +
> + testpmd> flow create 0 ingress pattern eth / vlan tci is 91 / ipv4 / end
> actions queue index 1 / end
> + testpmd> flow create 0 ingress pattern eth / vlan tci is 1978 / ipv4 / udp
> / end actions queue index 2 / end
> + testpmd> flow create 0 ingress pattern eth / vlan tci is 2391 / ipv4 / tcp
> / end actions queue index 3 / end
> + testpmd> flow create 0 ingress pattern eth / vlan tci is 4028 / ipv4 / sctp
> / end actions queue index 4 / end
> + testpmd> flow create 0 ingress pattern eth / vlan tci is 986 / ipv4
> + / sctp / end actions drop / end
> +
> + testpmd> flow create 0 ingress pattern eth / vlan tci is 2477 / ipv6 /
> end actions queue index 1 / end
> + testpmd> flow create 0 ingress pattern eth / vlan tci is 3407 / ipv6 / udp
> / end actions queue index 2 / end
> + testpmd> flow create 0 ingress pattern eth / vlan tci is 2283 / ipv6 / tcp
> / end actions queue index 3 / end
> + testpmd> flow create 0 ingress pattern eth / vlan tci is 2709 / ipv6 / sctp
> / end actions queue index 4 / end
> + testpmd> flow create 0 ingress pattern eth / vlan tci is 3734 /
> + ipv6 / sctp / end actions drop / end
> +
> +3. send the packets::
> +
> + verify packet
> + pkt1,pkt2 to queue 1, pkt3,pkt4 to queue 2, pkt5,pkt6 to queue 3,
> + pkt7,pkt8 to queue 4, pkt9,pkt10 to queue 0, pkt13, pkt14 can't be
> received by pf,
> + pkt17,pkt18 to queue 1, pkt19,pkt20 to queue 2, pkt21,pkt22 to queue
> 3,
> + pkt23,pkt24 to queue 4, pkt27, pkt28 can't be received by pf.
> +
> +4. verify rules can be listed and destroyed.
> +
> Test case: Intel® Ethernet 700 Series fdir wrong parameters
> ===========================================================
>
> 1. Launch the app ``testpmd`` with the following arguments::
>
> - ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 1ffff -n 4 -a 05:00.0
> --file-prefix=pf --socket-mem=1024,1024 -- -i --rxq=16 --txq=16 --disable-rss
> --pkt-filter-mode=perfect
> + ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 1ffff -n 4 -a
> + 05:00.0 --file-prefix=pf --socket-mem=1024,1024 -- -i --rxq=16
> + --txq=16 --disable-rss
> testpmd> set fwd rxonly
> testpmd> set verbose 1
> testpmd> start
> @@ -548,15 +697,6 @@ Test case: Intel® Ethernet 700 Series fdir wrong
> parameters
> it shows "Caught error type 11 (specific action): cause: 0x7ffc7bb9a338,
> Invalid queue ID for FDIR".
>
> - If create a rule on vf that has invalid queue ID::
> -
> - testpmd> flow validate 0 ingress transfer pattern eth / ipv4 src is
> 192.168.0.1 dst is 192.168.0.2 proto is 3 / vf id is 0 / end actions queue index 4 /
> end
> - testpmd> flow create 0 ingress transfer pattern eth / ipv4 src is
> 192.168.0.1 dst is 192.168.0.2 proto is 3 / vf id is 0 / end actions queue index 4 /
> end
> -
> - it shows "Caught error type 11 (specific action): cause: 0x7ffc7bb9a338,
> - Invalid queue ID for FDIR".
> -
> -
> Note:
>
> /// not support IP fragment ///
> @@ -664,6 +804,52 @@ Test case: Intel® Ethernet 700 Series tunnel vxlan
> testpmd> flow flush 0
> testpmd> flow list 0
>
> +Sub-case: tunnel vxlan (bind the pf to vfio-pci)
> +------------------------------------------------
> +
> +1. Launch the app ``testpmd`` with the following arguments::
> +
> + ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 1ffff -n 4 -a 05:00.0
> --file-prefix=pf --socket-mem=1024,1024 --legacy-mem -- -i --rxq=16 --txq=16
> --disable-rss
> + testpmd> rx_vxlan_port add 4789 0
> + testpmd> set fwd rxonly
> + testpmd> set verbose 1
> + testpmd> start
> +
> +2. create filter rules::
> +
> + testpmd> flow create 0 ingress pattern eth / ipv4 / udp / vxlan / eth dst is
> 00:11:22:33:44:66 / end actions pf / queue index 1 / end
> + testpmd> flow create 0 ingress pattern eth / ipv4 / udp / vxlan vni is 794 /
> eth dst is 00:11:22:33:44:66 / end actions pf / queue index 2 / end
> + testpmd> flow create 0 ingress pattern eth / ipv4 / udp / vxlan / eth dst is
> 00:11:22:33:44:66 / vlan tci is 3478 / end actions pf / queue index 3 / end
> + testpmd> flow create 0 ingress pattern eth / ipv4 / udp / vxlan vni is 2611
> / eth dst is 00:11:22:33:44:66 / vlan tci is 2434 / end actions pf / queue index
> 4 / end
> + testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55
> + / ipv4 / udp / vxlan vni is 1909 / eth dst is 00:11:22:33:44:66 / end
> + actions pf / queue index 5 / end
> +
> + testpmd> flow validate 0 ingress pattern eth / ipv4 / udp / vxlan / eth dst
> is 00:11:22:33:44:66 / end actions pf / queue index 2 / end
> + testpmd> flow validate 0 ingress pattern eth / ipv4 / udp / vxlan vni is 423
> / eth dst is 00:11:22:33:44:66 / end actions pf / queue index 5 / end
> + testpmd> flow validate 0 ingress pattern eth / ipv4 / udp / vxlan / eth dst
> is 00:11:22:33:44:66 / vlan tci is 2503 / end actions pf / queue index 4 / end
> + testpmd> flow validate 0 ingress pattern eth / ipv4 / udp / vxlan vni is 330
> / eth dst is 00:11:22:33:44:66 / vlan tci is 1503 / end actions pf / queue index
> 8 / end
> + testpmd> flow validate 0 ingress pattern eth dst is
> + 00:11:22:33:44:55 / ipv4 / udp / vxlan vni is 513 / eth dst is
> + 00:11:22:33:44:66 / end actions pf / queue index 9 / end
> +
> +3. send packets::
> +
> + pkt1 =
> Ether(dst='3c:fd:fe:9c:5b:b8')/IP()/UDP()/VXLAN()/Ether(dst='00:11:22:33:44:6
> 6')/Raw('x' * 20)
> + pkt2 = Ether(dst='3c:fd:fe:9c:5b:b8')/IP()/UDP()/VXLAN(vni=794,
> flags=8)/Ether(dst='00:11:22:33:44:66')/Raw('x' * 20)
> + pkt3 =
> Ether(dst='3c:fd:fe:9c:5b:b8')/IP()/UDP()/VXLAN()/Ether(dst='00:11:22:33:44:6
> 6')/Dot1Q(vlan=3478)/Raw('x' * 20)
> + pkt4 = Ether(dst='3c:fd:fe:9c:5b:b8')/IP()/UDP()/VXLAN(vni=2611,
> flags=8)/Ether(dst='00:11:22:33:44:66')/Dot1Q(vlan=2434)/Raw('x' * 20)
> + pkt5 = Ether(dst='00:11:22:33:44:55')/IP()/UDP()/VXLAN(vni=1909,
> flags=8)/Ether(dst='00:11:22:33:44:66')/Raw('x' * 20)
> + pkt6 =
> Ether(dst="00:11:22:33:44:55")/IP()/UDP()/VXLAN()/Ether(dst="00:11:22:33:4
> 4:66")/Dot1Q(vlan=11)/IP()/TCP()/Raw("x" * 20)
> + pkt7 =
> + Ether(dst="00:11:22:33:44:55")/IP()/UDP()/VXLAN(vni=5)/Ether(dst="00:1
> + 1:22:33:44:77")/IP()/TCP()/Raw("x" * 20)
> +
> + verify pkt1 received by pf queue 1, pkt2 to pf queue 2, pkt3 to pf queue 3,
> pkt4 to pf queue 4, pkt5 to pf queue 5, pkt6 to pf queue 1, pkt7 to pf queue 0.
> +
> +4. verify rules can be listed and destroyed::
> +
> + testpmd> flow list 0
> + ID Group Prio Attr Rule
> + 0 0 0 i-- ETH IPV4 UDP VXLAN ETH => PF
> QUEUE
> + 1 0 0 i-- ETH IPV4 UDP VXLAN ETH => PF
> QUEUE
> + 2 0 0 i-- ETH IPV4 UDP VXLAN ETH VLAN =>
> PF QUEUE
> + 3 0 0 i-- ETH IPV4 UDP VXLAN ETH VLAN =>
> PF QUEUE
> + 4 0 0 i-- ETH IPV4 UDP VXLAN ETH => PF
> QUEUE
>
> Test case: Intel® Ethernet 700 Series tunnel nvgre
> ==================================================
> @@ -773,6 +959,51 @@ Test case: Intel® Ethernet 700 Series tunnel nvgre
> testpmd> flow flush 0
> testpmd> flow list 0
>
> +Sub-case: tunnel nvgre (bind the pf to vfio-pci)
> +------------------------------------------------
> +
> +1. Launch the app ``testpmd`` with the following arguments::
> +
> + ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 1ffff -n 4 -a 05:00.0
> --file-prefix=pf --socket-mem=1024,1024 --legacy-mem -- -i --rxq=16 --txq=16
> --disable-rss
> + testpmd> set fwd rxonly
> + testpmd> set verbose 1
> + testpmd> start
> +
> +2. create filter rules::
> +
> + testpmd> flow create 0 ingress pattern eth / ipv4 / nvgre / eth dst is
> 00:11:22:33:44:66 / end actions pf / queue index 1 / end
> + testpmd> flow create 0 ingress pattern eth / ipv4 / nvgre tni is 2835 / eth
> dst is 00:11:22:33:44:66 / end actions pf / queue index 2 / end
> + testpmd> flow create 0 ingress pattern eth / ipv4 / nvgre / eth dst is
> 00:11:22:33:44:66 / vlan tci is 1009 / end actions pf / queue index 3 / end
> + testpmd> flow create 0 ingress pattern eth / ipv4 / nvgre tni is 2570 / eth
> dst is 00:11:22:33:44:66 / vlan tci is 170 / end actions pf / queue index 4 /
> end
> + testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55
> + / ipv4 / nvgre tni is 568 / eth dst is 00:11:22:33:44:66 / end
> + actions pf / queue index 5 / end
> +
> + testpmd> flow validate 0 ingress pattern eth / ipv4 / nvgre / eth dst is
> 00:11:22:33:44:66 / end actions pf / queue index 11 / end
> + testpmd> flow validate 0 ingress pattern eth / ipv4 / nvgre tni is 1987 /
> eth dst is 00:11:22:33:44:66 / end actions pf / queue index 0 / end
> + testpmd> flow validate 0 ingress pattern eth / ipv4 / nvgre / eth dst is
> 00:11:22:33:44:66 / vlan tci is 266 / end actions pf / queue index 8 / end
> + testpmd> flow validate 0 ingress pattern eth / ipv4 / nvgre tni is 3114 /
> eth dst is 00:11:22:33:44:66 / vlan tci is 1776 / end actions pf / queue index 9
> / end
> + testpmd> flow validate 0 ingress pattern eth dst is
> + 00:11:22:33:44:55 / ipv4 / nvgre tni is 836 / eth dst is
> + 00:11:22:33:44:66 / end actions pf / queue index 1 / end
> +
> +3. send packets::
> +
> + pkt1 =
> Ether(dst='3c:fd:fe:9c:5b:b8')/IP()/GRE(key_present=1,proto=0x6558,key=0x00
> 000100)/Ether(dst='00:11:22:33:44:66')/Raw('x' * 20)
> + pkt2 =
> Ether(dst='3c:fd:fe:9c:5b:b8')/IP()/GRE(key_present=1,proto=0x6558,key=7257
> 60)/Ether(dst='00:11:22:33:44:66')/Raw('x' * 20)
> + pkt3 =
> Ether(dst='3c:fd:fe:9c:5b:b8')/IP()/GRE(key_present=1,proto=0x6558,key=0x00
> 000100)/Ether(dst='00:11:22:33:44:66')/Dot1Q(vlan=1009)/Raw('x' * 20)
> + pkt4 =
> Ether(dst='3c:fd:fe:9c:5b:b8')/IP()/GRE(key_present=1,proto=0x6558,key=6579
> 20)/Ether(dst='00:11:22:33:44:66')/Dot1Q(vlan=170)/Raw('x' * 20)
> + pkt5 =
> Ether(dst='00:11:22:33:44:55')/IP()/GRE(key_present=1,proto=0x6558,key=145
> 408)/Ether(dst='00:11:22:33:44:66')/Raw('x' * 20)
> + pkt6 =
> Ether(dst="00:11:22:33:44:55")/IP()/GRE(key_present=1,proto=0x6558,key=0x
> 00000100)/Ether(dst="00:11:22:33:44:66")/Dot1Q(vlan=1)/IP()/TCP()/Raw("x"
> * 20)
> + pkt7 =
> + Ether(dst="00:11:22:33:44:55")/IP()/GRE(key_present=1,proto=0x6558,key
> + =145408)/Ether(dst="00:11:22:33:44:77")/IP()/TCP()/Raw("x" * 20)
> +
> + verify pkt1 received by pf queue 1, pkt2 to pf queue 2, pkt3 to pf queue 3,
> pkt4 to pf queue 4, pkt5 to pf queue 5, pkt6 to pf queue 1, pkt7 to pf queue 0.
> +
> +4. verify rules can be listed and destroyed::
> +
> + testpmd> flow list 0
> + ID Group Prio Attr Rule
> + 0 0 0 i-- ETH IPV4 NVGRE ETH => PF QUEUE
> + 1 0 0 i-- ETH IPV4 NVGRE ETH => PF QUEUE
> + 2 0 0 i-- ETH IPV4 NVGRE ETH VLAN => PF
> QUEUE
> + 3 0 0 i-- ETH IPV4 NVGRE ETH VLAN => PF
> QUEUE
> + 4 0 0 i-- ETH IPV4 NVGRE ETH => PF QUEUE
>
> Test case: IXGBE SYN
> ====================
> @@ -921,7 +1152,7 @@ Test case: IXGBE fdir for ipv4
>
> 1. Launch the app ``testpmd`` with the following arguments::
>
> - ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 1ffff -n 4 -- -i --rxq=16
> --txq=16 --disable-rss --pkt-filter-mode=perfect
> + ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 1ffff -n 4 -- -i
> + --rxq=16 --txq=16 --disable-rss
> testpmd> set fwd rxonly
> testpmd> set verbose 1
> testpmd> start
> @@ -1023,7 +1254,7 @@ Test case: IXGBE fdir for signature(ipv4/ipv6)
>
> 1. Launch the app ``testpmd`` with the following arguments::
>
> - ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 1ffff -n 4 -- -i --rxq=16
> --txq=16 --disable-rss --pkt-filter-mode=signature
> + ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 1ffff -n 4 -- -i
> + --rxq=16 --txq=16 --disable-rss
> testpmd> set fwd rxonly
> testpmd> set verbose 1
> testpmd> start
> @@ -1176,7 +1407,7 @@ Test case: IXGBE fdir for mac/vlan(support by x540,
> x552, x550)
>
> 1. Launch the app ``testpmd`` with the following arguments::
>
> - ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 1ffff -n 4 -- -i --rxq=16
> --txq=16 --disable-rss --pkt-filter-mode=perfect-mac-vlan
> + ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 1ffff -n 4 -- -i
> + --rxq=16 --txq=16 --disable-rss
> testpmd> set fwd rxonly
> testpmd> set verbose 1
> testpmd> start
> @@ -1201,130 +1432,13 @@ Test case: IXGBE fdir for mac/vlan(support by
> x540, x552, x550)
> testpmd> flow flush 0
> testpmd> flow list 0
>
> -Test case: IXGBE fdir for Control levels of FDir match reporting(supported by
> 82599)
> -===============================================================
> =====================
> -
> -The status of FDir filter matching for each packet can be reported by the
> -hardware through the RX descriptor of each received packet, and this
> information -is copied into the packet mbuf, that can be examined by the
> application.
> -
> -There are three different reporting modes, that can be set in testpmd using
> the -``--pkt-filter-report-hash`` command line argument:
> -
> -
> -Sub-case: ``--pkt-filter-report-hash=none`` mode
> -------------------------------------------------
> -
> -In this mode FDir reporting mode, matches are never reported.
> -Start the ``testpmd`` application as follows::
> -
> - ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xf -- -i --rxq=4 --txq=4
> --disable-rss --pkt-filter-mode=perfect --pkt-filter-report-hash=none
> - testpmd> set verbose 1
> - testpmd> set fwd rxonly
> - testpmd> start
> -
> -Send the matched packet with Scapy on the traffic generator and check that no
> FDir information is printed::
> -
> - packet: pkt0=Ether(dst="90:E2:BA:AC:99:FC")/IP(src="192.168.0.1",
> dst="192.168.0.2")/Raw('x' * 20)
> - testpmd> port 0/queue 0: received 1 packets
> - src=00:0C:29:B3:0E:82 - dst=90:E2:BA:AC:99:FC - type=0x0800 -
> length=60 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV4 - sw ptype:
> L2_ETHER L3_IPV4 - l2_len=14 - l3_len=20 - Receive queue=0x0
> - ol_flags: RTE_MBUF_F_RX_L4_CKSUM_GOOD
> RTE_MBUF_F_RX_IP_CKSUM_GOOD
> RTE_MBUF_F_RX_OUTER_L4_CKSUM_UNKNOWN
> -
> -Add flow filter rule, and send the matched packet again.
> -No Dir information is printed, but it can be seen that the packet goes to queue
> 1::
> -
> - testpmd> flow create 0 ingress pattern eth / ipv4 src is 192.168.0.1 dst is
> 192.168.0.2 / end actions queue index 1 / mark id 1 / end
> - testpmd> port 0/queue 1: received 1 packets
> - src=00:0C:29:B3:0E:82 - dst=90:E2:BA:AC:99:FC - type=0x0800 -
> length=60 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV4 - sw ptype: L2_ETHER
> L3_IPV4 - l2_len=14 - l3_len=20 - Receive queue=0x1
> - ol_flags: RTE_MBUF_F_RX_L4_CKSUM_GOOD
> RTE_MBUF_F_RX_IP_CKSUM_GOOD
> RTE_MBUF_F_RX_OUTER_L4_CKSUM_UNKNOWN
> - testpmd> quit
> -
> -Sub-case: ``--pkt-filter-report-hash=match`` mode
> --------------------------------------------------
> -
> -In this mode FDir reporting mode, FDir information is printed for packets that
> match a filter.
> -Start the ``testpmd`` application as follows::
> -
> - ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xf -- -i --rxq=4 --txq=4
> --disable-rss --pkt-filter-mode=perfect --pkt-filter-report-hash=match
> - testpmd> set verbose 1
> - testpmd> set fwd rxonly
> - testpmd> start
> -
> -Send pkt0 packet with Scapy on the traffic generator and check that no FDir
> information is printed::
> -
> - packet: pkt0=Ether(dst="90:E2:BA:AC:99:FC")/IP(src="192.168.0.1",
> dst="192.168.0.2")/Raw('x' * 20)
> - testpmd> port 0/queue 0: received 1 packets
> - src=00:0C:29:B3:0E:82 - dst=90:E2:BA:AC:99:FC - type=0x0800 -
> length=60 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV4 - sw ptype: L2_ETHER
> L3_IPV4 - l2_len=14 - l3_len=20 - Receive queue=0x0
> - ol_flags: RTE_MBUF_F_RX_L4_CKSUM_GOOD
> RTE_MBUF_F_RX_IP_CKSUM_GOOD
> RTE_MBUF_F_RX_OUTER_L4_CKSUM_UNKNOWN
> -
> -Add flow filter rule, and send the pkt0 packet again.
> -This time, the match is indicated (``RTE_MBUF_F_RX_FDIR``), and its details
> (hash, id) printed ::
> -
> - testpmd> flow create 0 ingress pattern eth / ipv4 src is 192.168.0.1 dst is
> 192.168.0.2 / end actions queue index 1 / mark id 1 / end
> - testpmd> port 0/queue 1: received 1 packets
> - src=00:0C:29:B3:0E:82 - dst=90:E2:BA:AC:99:FC - type=0x0800 -
> length=60 - nb_segs=1 - FDIR matched hash=0x2f3 ID=0x1 - hw ptype:
> L2_ETHER L3_IPV4 - sw ptype: L2_ETHER L3_IPV4 - l2_len=14 - l3_len=20 -
> Receive queue=0x1
> - ol_flags: RTE_MBUF_F_RX_FDIR RTE_MBUF_F_RX_L4_CKSUM_GOOD
> RTE_MBUF_F_RX_IP_CKSUM_GOOD
> RTE_MBUF_F_RX_OUTER_L4_CKSUM_UNKNOWN
> -
> -Add flow filter rule by using different src,dst, and send the matched pkt1
> packet again.
> -This time, the match is indicated (``RTE_MBUF_F_RX_FDIR``), and its details
> (hash, id) printed ::
> -
> - packet: pkt1=Ether(dst="90:E2:BA:AC:99:FC")/IP(src="192.168.1.1",
> dst="192.168.1.2")/Raw('x' * 20)
> - testpmd> flow create 0 ingress pattern eth / ipv4 src is 192.168.1.1 dst is
> 192.168.1.2 / end actions queue index 2 / mark id 2 / end
> - testpmd> port 0/queue 2: received 1 packets
> - src=00:0C:29:B3:0E:82 - dst=90:E2:BA:AC:99:FC - type=0x0800 -
> length=64 - nb_segs=1 - FDIR matched hash=0x2f3 ID=0x2 - hw ptype:
> L2_ETHER L3_IPV4 - sw ptype: L2_ETHER L3_IPV4 - l2_len=14 - l3_len=20 -
> Receive queue=0x2
> - ol_flags: RTE_MBUF_F_RX_FDIR RTE_MBUF_F_RX_L4_CKSUM_GOOD
> RTE_MBUF_F_RX_IP_CKSUM_GOOD
> RTE_MBUF_F_RX_OUTER_L4_CKSUM_UNKNOWN
> -
> -Remove rule1 and send the matched pkt0 packet again. Check that no FDir
> information is printed::
> -
> - testpmd> flow destroy 0 rule 0
> - Flow rule #0 destroyed
> - testpmd> port 0/queue 0: received 1 packets
> - src=00:0C:29:B3:0E:82 - dst=90:E2:BA:AC:99:FC - type=0x0800 -
> length=60 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV4 - sw ptype: L2_ETHER
> L3_IPV4 - l2_len=14 - l3_len=20 - Receive queue=0x0
> - ol_flags: RTE_MBUF_F_RX_L4_CKSUM_GOOD
> RTE_MBUF_F_RX_IP_CKSUM_GOOD
> RTE_MBUF_F_RX_OUTER_L4_CKSUM_UNKNOWN
> -
> -Remove rule2, and send the match pkt1 packet again. Check that no FDir
> information is printed::
> -
> - testpmd> flow destroy 0 rule 1
> - Flow rule #1 destroyed
> - testpmd> port 0/queue 0: received 1 packets
> - src=00:0C:29:B3:0E:82 - dst=90:E2:BA:AC:99:FC - type=0x0800 -
> length=60 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV4 - sw ptype: L2_ETHER
> L3_IPV4 - l2_len=14 - l3_len=20 - Receive queue=0x0
> - ol_flags: RTE_MBUF_F_RX_L4_CKSUM_GOOD
> RTE_MBUF_F_RX_IP_CKSUM_GOOD
> RTE_MBUF_F_RX_OUTER_L4_CKSUM_UNKNOWN
> - testpmd> quit
> -
> -Sub-case: ``--pkt-filter-report-hash=always`` mode
> ---------------------------------------------------
> -
> -In this mode FDir reporting mode, FDir information is printed for every
> received packet.
> -Start the ``testpmd`` application as follows::
> -
> - ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xf -- -i --rxq=4 --txq=4
> --disable-rss --pkt-filter-mode=perfect --pkt-filter-report-hash=always
> - testpmd> set verbose 1
> - testpmd> set fwd rxonly
> - testpmd> start
> -
> -
> -Send matched pkt0 packet with Scapy on the traffic generator and check the
> output (FDIR id=0x0)::
> -
> - packet: pkt0=Ether(dst="90:E2:BA:AC:99:FC")/IP(src="192.168.0.1",
> dst="192.168.0.2")/Raw('x' * 20)
> - testpmd> port 0/queue 0: received 1 packets
> - src=00:0C:29:B3:0E:82 - dst=90:E2:BA:AC:99:FC - type=0x0800 -
> length=60 - nb_segs=1 - FDIR matched hash=0x2f3 ID=0x0 - hw ptype:
> L2_ETHER L3_IPV4 - sw ptype: L2_ETHER L3_IPV4 - l2_len=14 - l3_len=20 -
> Receive queue=0x0
> - ol_flags: RTE_MBUF_F_RX_FDIR RTE_MBUF_F_RX_L4_CKSUM_GOOD
> RTE_MBUF_F_RX_IP_CKSUM_GOOD
> RTE_MBUF_F_RX_OUTER_L4_CKSUM_UNKNOWN
> -
> -Add flow filter rule, and send the matched pkt0 packet again.
> -This time, the filter ID is different, and the packet goes to queue 1 ::
> -
> - testpmd> flow create 0 ingress pattern eth / ipv4 src is 192.168.0.1 dst is
> 192.168.0.2 / end actions queue index 1 / mark id 1 / end
> - testpmd> port 0/queue 1: received 1 packets
> - src=00:0C:29:B3:0E:82 - dst=90:E2:BA:AC:99:FC - type=0x0800 -
> length=60 - nb_segs=1 - FDIR matched hash=0x2f3 ID=0x1 - hw ptype:
> L2_ETHER L3_IPV4 - sw ptype: L2_ETHER L3_IPV4 - l2_len=14 - l3_len=20 -
> Receive queue=0x1
> - ol_flags: RTE_MBUF_F_RX_FDIR RTE_MBUF_F_RX_L4_CKSUM_GOOD
> RTE_MBUF_F_RX_IP_CKSUM_GOOD
> RTE_MBUF_F_RX_OUTER_L4_CKSUM_UNKNOWN
> - testpmd> quit
>
> Test case: IXGBE fdir for tunnel (vxlan and nvgre)(support by x540, x552, x550)
> ================================================================
> ===============
>
> 1. Launch the app ``testpmd`` with the following arguments::
>
> - ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 1ffff -n 4 -- -i --rxq=16
> --txq=16 --disable-rss --pkt-filter-mode=perfect-tunnel
> + ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 1ffff -n 4 -- -i
> + --rxq=16 --txq=16 --disable-rss
> testpmd> set fwd rxonly
> testpmd> set verbose 1
> testpmd> start
> @@ -2116,7 +2230,7 @@ Test case: Intel® Ethernet 700 Series fdir for l2 mac
> Verify second rule can not be created.
>
> Test case: Dual vlan(QinQ)
> -=================================
> +==========================
>
> 1. config testpmd on DUT
>
> @@ -2293,7 +2407,7 @@ Verify that the packets are not received (RX-packets
> do not increased)on the queue 1.
>
> Test Case: jumbo framesize filter
> -===================================
> +=================================
>
> This case is designed for NIC (82599, I350, 82576 and 82580). Since
> ``Testpmd`` could transmits packets with jumbo frame size , it also could @@
> -2330,7 +2444,7 @@ the packet are not received on the queue 2::
> testpmd> stop
>
> Test Case: 64 queues
> -========================
> +====================
>
> This case is designed for NIC(82599). Default use 64 queues for test
>
> --
> 2.17.1
next prev parent reply other threads:[~2022-12-06 3:21 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-30 8:04 [dts][PATCH V1 0/5] use decorator to skip igb_uio cases Lingli Chen
2022-11-30 8:04 ` [dts][PATCH V1 1/5] test_plans/generic_flow_api: add pf action subcase Lingli Chen
2022-12-06 3:21 ` Huang, ZhiminX [this message]
2022-11-30 8:04 ` [dts][PATCH V1 2/5] tests/generic_flow_api: " Lingli Chen
2022-12-06 3:24 ` Huang, ZhiminX
2022-11-30 8:04 ` [dts][PATCH V1 3/5] conf/test_case_*: " Lingli Chen
2022-11-30 8:04 ` [dts][PATCH V1 4/5] framework/test_case: add skip_unsupported_host_driver decorator Lingli Chen
2022-11-30 8:04 ` [dts][PATCH V1 5/5] tests/TestSuite_*: skip igb_uio cases Lingli Chen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=BN0PR11MB57122852E2B5C7334C34691DFD1B9@BN0PR11MB5712.namprd11.prod.outlook.com \
--to=zhiminx.huang@intel.com \
--cc=dts@dpdk.org \
--cc=linglix.chen@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).