From: Ajit Khaparde <ajit.khaparde@broadcom.com>
To: "Mcnamara, John" <john.mcnamara@intel.com>
Cc: "dev@dpdk.org" <dev@dpdk.org>
Subject: Re: [dpdk-dev] [v2 04/15] bnxt: Update Broadcom PMD driver documentation
Date: Mon, 26 Sep 2016 14:39:33 -0500 [thread overview]
Message-ID: <CACZ4nhvwkzC4xpjqindqWmZEv+9koThErz1Vfb2bCP3bSLWz8Q@mail.gmail.com> (raw)
In-Reply-To: <B27915DBBA3421428155699D51E4CFE20262314F@IRSMSX103.ger.corp.intel.com>
On Mon, Sep 26, 2016 at 2:33 PM, Mcnamara, John <john.mcnamara@intel.com>
wrote:
> > -----Original Message-----
> > From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Ajit Khaparde
> > Sent: Monday, September 26, 2016 5:19 PM
> > To: dev@dpdk.org
> > Subject: [dpdk-dev] [v2 04/15] bnxt: Update Broadcom PMD driver
> > documentation
> >
> > Update doc/guides/nics/bnxt.rst to indicate that the bnxt PMD driver
> > supports Broadcom NetXtreme-C/NetXtreme-E BCM5730X/BCM5740X family of
> > network controllers and Broadcom StrataGX BCM5871X family of
> > communications processors.
> >
> > Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
> > ---
> > doc/guides/nics/bnxt.rst | 23 +++++++++++++++++------
> > 1 file changed, 17 insertions(+), 6 deletions(-)
> >
> > diff --git a/doc/guides/nics/bnxt.rst b/doc/guides/nics/bnxt.rst index
> > 2669e98..cf7fca8 100644
> > --- a/doc/guides/nics/bnxt.rst
> > +++ b/doc/guides/nics/bnxt.rst
> > @@ -30,13 +30,24 @@
> > bnxt poll mode driver library
> > =============================
> >
> > -The bnxt poll mode library (**librte_pmd_bnxt**) implements support for
> -
> > **Broadcom NetXtreme(r) C-Series**. These adapters support Standards- -
> > compliant 10/25/50Gbps 30MPPS full-duplex throughput.
> > -
> > -Information about this family of adapters can be found in the
> > +The bnxt poll mode library (**librte_pmd_bnxt**) implements support for:
> > +**Broadcom NetXtreme-C(r)/NetXtreme-E(r) BCM5730X and BCM5740X family of
> > +Ethernet Network Controllers**. These adapters support Standards
> > +compliant 10/25/50Gbps 30MPPS full-duplex throughput.
> > +**Broadcom StrataGX(r) BCM5871X Series of Communucations Processors**
> > +These ARM based processors target a broad range of networking
> > +applications including virtual CPE (vCPE) and NFV appliances, 10G
> > +service routers and gateways, control plane processing for Ethernet
> > +switches and network attached storage (NAS).
> > +
> > +Information about the NetXtreme family of adapters can be found in the
> > `NetXtreme(r) Brand section <https://www.broadcom.com/
> products/ethernet-
> > communication-and-switching?technology%5B%5D=88>`_
> > -of the `Broadcom web site <http://www.broadcom.com/>`_.
> > +of the `Broadcom website <http://www.broadcom.com/>`_.
> > +
> > +Information about the StrataGX family of adapters can be found in the
> > +`StrataGX(r) BCM5871X Series section
> > +<http://www.broadcom.com/products/enterprise-and-network-processors/pro
> > +cessors/bcm58712>`_ of the `Broadcom website
> > +<http://www.broadcom.com/>`_.
>
> Hi,
>
> There is a full stop missing before "These ARM ...".
>
> Reformatting the text as follows would looks better in the rendered output:
>
Do you want me to resend the patch (series).
Or you can manage it w/o that?
>
>
> The bnxt poll mode library (**librte_pmd_bnxt**) implements support for:
>
> * **Broadcom NetXtreme-C(r)/NetXtreme-E(r) BCM5730X and BCM5740X family of
> Ethernet Network Controllers**: These adapters support Standards
> compliant
> 10/25/50Gbps 30MPPS full-duplex throughput.
>
> Information about the NetXtreme family of adapters can be found in the
> `NetXtreme(r) Brand section
> <https://www.broadcom.com/products/ethernet-communication-and-switching?
> technology%5B%5D=88>`_
> of the `Broadcom website <http://www.broadcom.com/>`_.
>
> * **Broadcom StrataGX(r) BCM5871X Series of Communucations Processors**:
> These
> ARM based processors target a broad range of networking applications
> including virtual CPE (vCPE) and NFV appliances, 10G service routers and
> gateways, control plane processing for Ethernet switches and network
> attached storage (NAS).
>
> Information about the StrataGX family of adapters can be found in the
> `StrataGX(r) BCM5871X Series section
> <http://www.broadcom.com/products/enterprise-and-
> network-processors/processors/bcm58712>`_
> of the `Broadcom website <http://www.broadcom.com/>`_.
>
> P.S. Could you mark the V1 version as "superseded" in PatchWork.
>
Sure.
>
> Regards,
>
> John
>
next prev parent reply other threads:[~2016-09-26 19:40 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-09-26 16:18 Ajit Khaparde
2016-09-26 19:33 ` Mcnamara, John
2016-09-26 19:39 ` Ajit Khaparde [this message]
2016-09-26 20:22 ` Mcnamara, John
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CACZ4nhvwkzC4xpjqindqWmZEv+9koThErz1Vfb2bCP3bSLWz8Q@mail.gmail.com \
--to=ajit.khaparde@broadcom.com \
--cc=dev@dpdk.org \
--cc=john.mcnamara@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).