DPDK patches and discussions
 help / color / mirror / Atom feed
From: jigsaw <jigsaw@gmail.com>
To: Bruce Richardson <bruce.richardson@intel.com>
Cc: "dev@dpdk.org" <dev@dpdk.org>
Subject: Re: [dpdk-dev] [PATCH] Add user defined tag calculation callback to librte_distributor.
Date: Thu, 6 Nov 2014 12:14:57 +0200	[thread overview]
Message-ID: <CAHVfvh59=zEixKWN4K+edUWLbXehJZeuNEjYPyrPvSbgNwaUzA@mail.gmail.com> (raw)
In-Reply-To: <20141106092228.GA3056@bricha3-MOBL3>

OK understood. Thanks. -qinglai

On Thu, Nov 6, 2014 at 11:22 AM, Bruce Richardson <
bruce.richardson@intel.com> wrote:

> On Wed, Nov 05, 2014 at 07:24:13PM +0200, jigsaw wrote:
> > Hi Bruce,
> >
> > OK understood. Then there's no real need to make any change.
> > But the question remains about this line:
> >
> >
> http://dpdk.org/browse/dpdk/tree/lib/librte_distributor/rte_distributor.c#n285
> >
> >         new_tag = (next_mb->hash.rss | 1);
> >
> > Why the logical OR is needed?
>
> That's needed to ensure that we never track a tag with an actual value of
> zero.
> We instead always force the low bit to be 1, so that we can use zero as an
> "empty" value.
>
> /Bruce
>
> >
> > thx &
> > rgds,
> >
> > -qinglai
> >
> > On Wed, Nov 5, 2014 at 6:36 PM, Bruce Richardson <
> bruce.richardson@intel.com
> > > wrote:
> >
> > > On Wed, Nov 05, 2014 at 05:11:51PM +0200, jigsaw wrote:
> > > > Hi Bruce,
> > > >
> > > > Thanks for reply.
> > > > The idea is triggered by real life use case, where the flow id is
> buried
> > > in
> > > > L3 payload. Deep packet inspection is one of the scenarios, tunneled
> pkts
> > > > is another.
> > > > However, only functionality is verified. Performance impact has not
> been
> > > > checked yet.
> > > >
> > > > To add distributor and another void * as params is nice.
> > > >
> > > > Your advice of extract tags in a row inspired me another solution,
> which
> > > is
> > > > to change the union hash inside rte_mbuf:
> > > >
> > > > diff --git a/lib/librte_mbuf/rte_mbuf.h b/lib/librte_mbuf/rte_mbuf.h
> > > > index e8f9bfc..5b13c0b 100644
> > > > --- a/lib/librte_mbuf/rte_mbuf.h
> > > > +++ b/lib/librte_mbuf/rte_mbuf.h
> > > > @@ -185,6 +185,7 @@ struct rte_mbuf {
> > > >                         uint16_t id;
> > > >                 } fdir;           /**< Filter identifier if FDIR
> enabled
> > > */
> > > >                 uint32_t sched;   /**< Hierarchical scheduler */
> > > > +               uint32_t user;    /**< User defined hash tag */
> > > >         } hash;                   /**< hash information */
> > > >
> > > >         /* second cache line - fields only used in slow path or on
> TX */
> > > >
> > > > The new union field user is actually for documentation purpose only,
> coz
> > > > user application can set hash.rss value and have the same result.
> > > > Therefore, the user application is free to calculate the tag in burst
> > > mode
> > > > before calling rte_distributor_process.
> > > >
> > > > Then rte_distributor_process needs to read next_mb->hash.user.
> > > > Does it sounds better?
> > >
> > > What you propose is the exact original intent, though I did not try to
> add
> > > a new union member purely for documentation purposes. I had planned,
> but
> > > perhaps did not explain well enough, that the application would itself
> set
> > > up
> > > the tag as it thought best before passing packets to the distributor. I
> > > suspect
> > > that overloading the RSS field for this impeded that idea geting
> through.
> > >
> > > /Bruce
> > >
> > > >
> > > > I have another question: why the logical OR 1 is added to new_tag?
> > > >
> > > > thx &
> > > > rgds,
> > > > -qinglai
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > On Wed, Nov 5, 2014 at 4:27 PM, Bruce Richardson <
> > > bruce.richardson@intel.com
> > > > > wrote:
> > > >
> > > > > On Wed, Nov 05, 2014 at 03:30:37PM +0200, Qinglai Xiao wrote:
> > > > > > User defined tag calculation has access to mbuf.
> > > > > > Default tag is RSS hash result.
> > > > > >
> > > > >
> > > > > Interesting idea.
> > > > > Did you investigate was there any performance improvement or
> regression
> > > > > comparing
> > > > > whether the callback was called per-packet as packets were
> dequeued for
> > > > > distribution
> > > > > (i.e. how you have things now in your patch), compared to calling
> > > > > the callback in a loop to extract the tags for all packets
> initially? I
> > > > > suspect
> > > > > there probably isn't much performance difference either way, but it
> > > may be
> > > > > worth
> > > > > checking.
> > > > > One other point, is that I think the callback to extract the tag
> should
> > > > > have
> > > > > additional parameters - at least one, if not two. I would suggest
> that
> > > the
> > > > > distributor pointer be passed in, as well as an arbitrary void *
> > > pointer.
> > > > >
> > > > > Regards,
> > > > > /Bruce
> > > > >
> > > > > > Signed-off-by: Qinglai Xiao <jigsaw@gmail.com>
> > > > > > ---
> > > > > >  app/test/test_distributor.c              |    6 +++---
> > > > > >  app/test/test_distributor_perf.c         |    2 +-
> > > > > >  lib/librte_distributor/rte_distributor.c |   12 ++++++++++--
> > > > > >  lib/librte_distributor/rte_distributor.h |    7 ++++++-
> > > > > >  4 files changed, 20 insertions(+), 7 deletions(-)
> > > > > >
> > > > > > diff --git a/app/test/test_distributor.c
> > > b/app/test/test_distributor.c
> > > > > > index ce06436..6ea4943 100644
> > > > > > --- a/app/test/test_distributor.c
> > > > > > +++ b/app/test/test_distributor.c
> > > > > > @@ -452,7 +452,7 @@ int test_error_distributor_create_name(void)
> > > > > >       char *name = NULL;
> > > > > >
> > > > > >       d = rte_distributor_create(name, rte_socket_id(),
> > > > > > -                     rte_lcore_count() - 1);
> > > > > > +                     rte_lcore_count() - 1, NULL);
> > > > > >       if (d != NULL || rte_errno != EINVAL) {
> > > > > >               printf("ERROR: No error on create() with NULL name
> > > > > param\n");
> > > > > >               return -1;
> > > > > > @@ -467,7 +467,7 @@ int
> > > test_error_distributor_create_numworkers(void)
> > > > > >  {
> > > > > >       struct rte_distributor *d = NULL;
> > > > > >       d = rte_distributor_create("test_numworkers",
> rte_socket_id(),
> > > > > > -                     RTE_MAX_LCORE + 10);
> > > > > > +                     RTE_MAX_LCORE + 10, NULL);
> > > > > >       if (d != NULL || rte_errno != EINVAL) {
> > > > > >               printf("ERROR: No error on create() with
> num_workers >
> > > > > MAX\n");
> > > > > >               return -1;
> > > > > > @@ -515,7 +515,7 @@ test_distributor(void)
> > > > > >
> > > > > >       if (d == NULL) {
> > > > > >               d = rte_distributor_create("Test_distributor",
> > > > > rte_socket_id(),
> > > > > > -                             rte_lcore_count() - 1);
> > > > > > +                             rte_lcore_count() - 1, NULL);
> > > > > >               if (d == NULL) {
> > > > > >                       printf("Error creating distributor\n");
> > > > > >                       return -1;
> > > > > > diff --git a/app/test/test_distributor_perf.c
> > > > > b/app/test/test_distributor_perf.c
> > > > > > index b04864c..507e446 100644
> > > > > > --- a/app/test/test_distributor_perf.c
> > > > > > +++ b/app/test/test_distributor_perf.c
> > > > > > @@ -227,7 +227,7 @@ test_distributor_perf(void)
> > > > > >
> > > > > >       if (d == NULL) {
> > > > > >               d = rte_distributor_create("Test_perf",
> > > rte_socket_id(),
> > > > > > -                             rte_lcore_count() - 1);
> > > > > > +                             rte_lcore_count() - 1, NULL);
> > > > > >               if (d == NULL) {
> > > > > >                       printf("Error creating distributor\n");
> > > > > >                       return -1;
> > > > > > diff --git a/lib/librte_distributor/rte_distributor.c
> > > > > b/lib/librte_distributor/rte_distributor.c
> > > > > > index 585ff88..78c92bd 100644
> > > > > > --- a/lib/librte_distributor/rte_distributor.c
> > > > > > +++ b/lib/librte_distributor/rte_distributor.c
> > > > > > @@ -97,6 +97,7 @@ struct rte_distributor {
> > > > > >       union rte_distributor_buffer bufs[RTE_MAX_LCORE];
> > > > > >
> > > > > >       struct rte_distributor_returned_pkts returns;
> > > > > > +     rte_distributor_tag_fn tag_cb;
> > > > > >  };
> > > > > >
> > > > > >  TAILQ_HEAD(rte_distributor_list, rte_distributor);
> > > > > > @@ -267,6 +268,7 @@ rte_distributor_process(struct
> rte_distributor
> > > *d,
> > > > > >       struct rte_mbuf *next_mb = NULL;
> > > > > >       int64_t next_value = 0;
> > > > > >       uint32_t new_tag = 0;
> > > > > > +     rte_distributor_tag_fn tag_cb = d->tag_cb;
> > > > > >       unsigned ret_start = d->returns.start,
> > > > > >                       ret_count = d->returns.count;
> > > > > >
> > > > > > @@ -282,7 +284,11 @@ rte_distributor_process(struct
> rte_distributor
> > > *d,
> > > > > >                       next_mb = mbufs[next_idx++];
> > > > > >                       next_value = (((int64_t)(uintptr_t)next_mb)
> > > > > >                                       << RTE_DISTRIB_FLAG_BITS);
> > > > > > -                     new_tag = (next_mb->hash.rss | 1);
> > > > > > +                     if (tag_cb) {
> > > > > > +                             new_tag = tag_cb(next_mb);
> > > > > > +                     } else {
> > > > > > +                             new_tag = (next_mb->hash.rss | 1);
> > > > > > +                     }
> > > > > >
> > > > > >                       uint32_t match = 0;
> > > > > >                       unsigned i;
> > > > > > @@ -401,7 +407,8 @@ rte_distributor_clear_returns(struct
> > > rte_distributor
> > > > > *d)
> > > > > >  struct rte_distributor *
> > > > > >  rte_distributor_create(const char *name,
> > > > > >               unsigned socket_id,
> > > > > > -             unsigned num_workers)
> > > > > > +             unsigned num_workers,
> > > > > > +             rte_distributor_tag_fn tag_cb)
> > > > > >  {
> > > > > >       struct rte_distributor *d;
> > > > > >       struct rte_distributor_list *distributor_list;
> > > > > > @@ -435,6 +442,7 @@ rte_distributor_create(const char *name,
> > > > > >       d = mz->addr;
> > > > > >       snprintf(d->name, sizeof(d->name), "%s", name);
> > > > > >       d->num_workers = num_workers;
> > > > > > +     d->tag_cb = tag_cb;
> > > > > >
> > > > > >       rte_rwlock_write_lock(RTE_EAL_TAILQ_RWLOCK);
> > > > > >       TAILQ_INSERT_TAIL(distributor_list, d, next);
> > > > > > diff --git a/lib/librte_distributor/rte_distributor.h
> > > > > b/lib/librte_distributor/rte_distributor.h
> > > > > > index ec0d74a..844d325 100644
> > > > > > --- a/lib/librte_distributor/rte_distributor.h
> > > > > > +++ b/lib/librte_distributor/rte_distributor.h
> > > > > > @@ -52,6 +52,9 @@ extern "C" {
> > > > > >
> > > > > >  struct rte_distributor;
> > > > > >
> > > > > > +typedef uint32_t (*rte_distributor_tag_fn)(struct rte_mbuf *);
> > > > > > +/**< User defined tag calculation function */
> > > > > > +
> > > > > >  /**
> > > > > >   * Function to create a new distributor instance
> > > > > >   *
> > > > > > @@ -65,12 +68,14 @@ struct rte_distributor;
> > > > > >   * @param num_workers
> > > > > >   *   The maximum number of workers that will request packets
> from
> > > this
> > > > > >   *   distributor
> > > > > > + * @param tag_cb
> > > > > > + *   The callback function for calculation of user defined tag.
> > > > > >   * @return
> > > > > >   *   The newly created distributor instance
> > > > > >   */
> > > > > >  struct rte_distributor *
> > > > > >  rte_distributor_create(const char *name, unsigned socket_id,
> > > > > > -             unsigned num_workers);
> > > > > > +             unsigned num_workers, rte_distributor_tag_fn
> tag_cb);
> > > > > >
> > > > > >  /*  *** APIS to be called on the distributor lcore ***  */
> > > > > >  /*
> > > > > > --
> > > > > > 1.7.1
> > > > > >
> > > > >
> > >
>

  reply	other threads:[~2014-11-06 10:05 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-11-05 13:30 Qinglai Xiao
2014-11-05 14:27 ` Bruce Richardson
2014-11-05 15:11   ` jigsaw
2014-11-05 16:36     ` Bruce Richardson
2014-11-05 17:24       ` jigsaw
2014-11-06  9:22         ` Bruce Richardson
2014-11-06 10:14           ` jigsaw [this message]
2014-11-06 10:36           ` Thomas Monjalon
2014-11-06 12:36             ` [dpdk-dev] 答复: [PATCH] Add user defined tag calculation callback tolibrte_distributor Qinglai Xiao
2014-11-06 13:59               ` Bruce Richardson
2014-11-06 18:01                 ` jigsaw
2014-11-06 19:52                   ` jigsaw
2014-11-07  9:45                     ` Bruce Richardson
2014-11-07 12:38                       ` jigsaw
2014-11-07 13:53                         ` Bruce Richardson
2014-11-07 14:31                           ` jigsaw
     [not found]                             ` <20141107144410.GC12092@bricha3-MOBL3>
2014-11-07 14:52                               ` jigsaw
2014-11-07 15:04                                 ` Bruce Richardson
2014-11-07 15:18                                   ` jigsaw
2014-11-06 13:55             ` [dpdk-dev] [PATCH] distributor: add comments to make code more readable Bruce Richardson
2014-11-07 14:08               ` Thomas Monjalon
2014-11-07 14:31                 ` jigsaw
2014-11-06 13:57             ` [dpdk-dev] [PATCH] Add user defined tag calculation callback to librte_distributor Bruce Richardson
2014-11-05 15:13   ` Ananyev, Konstantin
2014-11-05 15:24     ` jigsaw

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CAHVfvh59=zEixKWN4K+edUWLbXehJZeuNEjYPyrPvSbgNwaUzA@mail.gmail.com' \
    --to=jigsaw@gmail.com \
    --cc=bruce.richardson@intel.com \
    --cc=dev@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).