From: Jan Blunck <jblunck@infradead.org>
To: Olivier Matz <olivier.matz@6wind.com>
Cc: "Ananyev, Konstantin" <konstantin.ananyev@intel.com>,
"dev@dpdk.org" <dev@dpdk.org>
Subject: Re: [dpdk-dev] [RFC 0/8] mbuf: structure reorganization
Date: Mon, 20 Feb 2017 10:27:40 +0100 [thread overview]
Message-ID: <CALe+Z01vzfLsCuy8vvVMyoOPU72NwKK0fPmMcxAbRYXx+g6kPg@mail.gmail.com> (raw)
In-Reply-To: <20170217151708.20bf4a49@platinum>
On Fri, Feb 17, 2017 at 3:17 PM, Olivier Matz <olivier.matz@6wind.com> wrote:
>
> Sorry, I don't really get your point. My comprehension of the timestamp
> usage in a PMD is as following:
>
> rx_burst(struct rxq *rxq, ...)
> {
> unsigned long factor = rxq->timestamp_factor;
> unsigned port = rxq->port;
>
> for each hw_desc {
> m = rte_pktmbuf_alloc(rxq->pool);
> m->len = hw_desc->len;
> m->port = port;
> m->ol_flags =
> ...
> m->timestamp = hw_desc->timestamp * factor;
> }
> ...
> }
>
> In that case, I think it deserves to be in the 1st cache line.
>
Timestamps are non-functional data. I believe they don't deserve to be
data normalized.
It would be beneficial to normalize the access of non-functional data.
That would require some kind of extension or feature flags, e.g. like
some uverb structures support extensions. This would allow the NICs
that support timestamps to do the minimal amount of work during burst
and defer data normalization to the time of access. That would also
safe everyone from wasting 64bit in the first cacheline in case
timestamps are not supported or unused.
next prev parent reply other threads:[~2017-02-20 9:27 UTC|newest]
Thread overview: 155+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-24 15:19 Olivier Matz
2017-01-24 15:19 ` [dpdk-dev] [RFC 1/8] mbuf: make segment prefree function public Olivier Matz
2017-01-24 15:19 ` [dpdk-dev] [RFC 2/8] mbuf: make raw free " Olivier Matz
2017-01-24 15:19 ` [dpdk-dev] [RFC 3/8] mbuf: set mbuf fields while in pool Olivier Matz
2017-01-24 15:50 ` Bruce Richardson
2017-02-28 14:51 ` Olivier Matz
2017-01-24 15:19 ` [dpdk-dev] [RFC 4/8] net: don't touch mbuf next or nb segs on Rx Olivier Matz
2017-01-24 15:19 ` [dpdk-dev] [RFC 5/8] mbuf: make rearm data address naturally aligned Olivier Matz
2017-01-24 15:19 ` [dpdk-dev] [RFC 6/8] mbuf: use 2 bytes for port and nb segments Olivier Matz
2017-01-24 15:19 ` [dpdk-dev] [RFC 7/8] mbuf: move sequence number in second cache line Olivier Matz
2017-01-24 15:19 ` [dpdk-dev] [RFC 8/8] mbuf: add a timestamp field Olivier Matz
2017-01-24 15:59 ` [dpdk-dev] [RFC 0/8] mbuf: structure reorganization Bruce Richardson
2017-01-24 16:16 ` Olivier MATZ
2017-02-06 18:41 ` Ananyev, Konstantin
2017-02-09 16:20 ` Morten Brørup
2017-02-09 16:56 ` Ananyev, Konstantin
2017-02-16 13:48 ` Olivier Matz
2017-02-16 15:46 ` Bruce Richardson
2017-02-16 16:14 ` Olivier Matz
2017-02-21 14:20 ` Morten Brørup
2017-02-21 14:28 ` Bruce Richardson
2017-02-21 15:04 ` Olivier MATZ
2017-02-21 15:18 ` Bruce Richardson
2017-02-21 15:18 ` Morten Brørup
2017-02-19 19:04 ` Chilikin, Andrey
2017-02-21 9:53 ` Olivier MATZ
2017-02-16 17:26 ` Jan Blunck
2017-02-17 10:51 ` Olivier Matz
2017-02-17 12:49 ` Nélio Laranjeiro
2017-02-17 13:51 ` Jan Blunck
2017-02-18 5:48 ` Andrew Rybchenko
2017-02-17 13:38 ` Jan Blunck
2017-02-17 14:17 ` Olivier Matz
2017-02-17 18:42 ` Ananyev, Konstantin
2017-02-21 9:53 ` Olivier MATZ
2017-02-21 10:28 ` Ananyev, Konstantin
2017-02-20 9:27 ` Jan Blunck [this message]
2017-02-21 9:54 ` Olivier MATZ
2017-02-21 16:12 ` Jan Blunck
2017-02-21 16:38 ` Bruce Richardson
2017-02-21 17:04 ` Jan Blunck
2017-02-21 17:26 ` Ananyev, Konstantin
2017-02-21 19:17 ` Jan Blunck
2017-02-21 20:30 ` Ananyev, Konstantin
2017-02-21 21:51 ` Morten Brørup
2017-02-24 14:11 ` Olivier Matz
2017-02-24 14:00 ` Olivier Matz
2017-02-24 14:21 ` Bruce Richardson
2017-02-28 8:55 ` Jan Blunck
2017-02-28 9:05 ` Ananyev, Konstantin
2017-02-28 9:23 ` Olivier Matz
2017-02-28 9:33 ` Jan Blunck
2017-02-28 10:29 ` Ananyev, Konstantin
2017-02-28 10:50 ` Olivier Matz
2017-02-28 11:48 ` Ananyev, Konstantin
2017-02-28 12:28 ` Olivier Matz
2017-02-28 22:53 ` Ananyev, Konstantin
2017-03-02 16:46 ` Olivier Matz
2017-03-08 11:11 ` Ananyev, Konstantin
2017-03-20 9:00 ` Olivier Matz
2017-03-22 17:42 ` Ananyev, Konstantin
2017-03-24 8:35 ` Jerin Jacob
2017-03-24 13:35 ` Olivier Matz
2017-02-28 9:25 ` Jan Blunck
2017-02-19 23:45 ` Ananyev, Konstantin
2017-02-21 9:22 ` Morten Brørup
2017-02-21 9:54 ` Olivier MATZ
2017-03-08 9:41 ` [dpdk-dev] [PATCH 0/9] " Olivier Matz
2017-03-08 9:41 ` [dpdk-dev] [PATCH 1/9] mbuf: make segment prefree function public Olivier Matz
2017-03-08 9:41 ` [dpdk-dev] [PATCH 2/9] mbuf: make raw free " Olivier Matz
2017-03-08 9:41 ` [dpdk-dev] [PATCH 3/9] mbuf: set mbuf fields while in pool Olivier Matz
2017-03-31 11:21 ` Bruce Richardson
2017-03-31 11:51 ` Ananyev, Konstantin
2017-03-08 9:41 ` [dpdk-dev] [PATCH 4/9] drivers/net: don't touch mbuf next or nb segs on Rx Olivier Matz
2017-03-08 9:41 ` [dpdk-dev] [PATCH 5/9] mbuf: make rearm data address naturally aligned Olivier Matz
2017-03-08 9:41 ` [dpdk-dev] [PATCH 6/9] mbuf: use 2 bytes for port and nb segments Olivier Matz
2017-03-08 9:41 ` [dpdk-dev] [PATCH 7/9] mbuf: move sequence number in second cache line Olivier Matz
2017-03-08 9:42 ` [dpdk-dev] [PATCH 8/9] mbuf: add a timestamp field Olivier Matz
2017-04-04 10:29 ` [dpdk-dev] [PATCH 0/2] reduce writes to mbuf in ixgbe vRX Konstantin Ananyev
2017-04-07 15:13 ` Ferruh Yigit
2017-04-07 15:44 ` Ferruh Yigit
2017-04-09 22:56 ` Ananyev, Konstantin
2017-04-04 10:29 ` [dpdk-dev] [PATCH 1/2] net/ixgbe: eliminate mbuf write on rearm Konstantin Ananyev
2017-04-10 15:59 ` [dpdk-dev] [PATCH v2 0/2] reduce writes to mbuf in ixgbe vRX Konstantin Ananyev
2017-04-10 16:17 ` Ferruh Yigit
2017-04-10 15:59 ` [dpdk-dev] [PATCH v2 1/2] net/ixgbe: eliminate mbuf write on rearm Konstantin Ananyev
2017-04-10 15:59 ` [dpdk-dev] [PATCH v2 2/2] net/ixgbe: remove option to disable offload flags Konstantin Ananyev
2017-04-04 10:29 ` [dpdk-dev] [PATCH " Konstantin Ananyev
2017-03-08 9:42 ` [dpdk-dev] [PATCH 9/9] mbuf: reorder VLAN tci and buffer len fields Olivier Matz
2017-03-29 15:56 ` [dpdk-dev] [PATCH 0/9] mbuf: structure reorganization Olivier Matz
2017-03-29 16:03 ` Morten Brørup
2017-03-29 20:09 ` Bruce Richardson
2017-03-30 9:31 ` Bruce Richardson
2017-03-30 12:02 ` Olivier Matz
2017-03-30 12:23 ` Bruce Richardson
2017-03-30 16:45 ` Ananyev, Konstantin
2017-03-30 16:47 ` Ananyev, Konstantin
2017-03-30 18:06 ` Ananyev, Konstantin
2017-03-31 8:41 ` Olivier Matz
2017-03-31 9:58 ` Ananyev, Konstantin
2017-03-31 1:00 ` Ananyev, Konstantin
2017-03-31 7:21 ` Morten Brørup
2017-03-31 8:26 ` Olivier Matz
2017-03-31 8:41 ` Bruce Richardson
2017-03-31 8:59 ` Olivier Matz
2017-03-31 9:18 ` Ananyev, Konstantin
2017-03-31 9:36 ` Olivier Matz
2017-04-03 16:15 ` Thomas Monjalon
2017-04-04 7:58 ` Olivier MATZ
2017-04-04 8:53 ` Bruce Richardson
2017-03-31 9:23 ` Bruce Richardson
2017-03-31 11:18 ` Nélio Laranjeiro
2017-03-30 14:54 ` Andrew Rybchenko
2017-03-30 15:12 ` Jerin Jacob
2017-04-04 16:27 ` [dpdk-dev] [PATCH v2 0/8] " Olivier Matz
2017-04-04 16:28 ` [dpdk-dev] [PATCH v2 1/8] mbuf: make segment prefree function public Olivier Matz
2017-04-04 16:28 ` [dpdk-dev] [PATCH v2 2/8] mbuf: make raw free " Olivier Matz
2017-04-04 16:28 ` [dpdk-dev] [PATCH v2 3/8] mbuf: set mbuf fields while in pool Olivier Matz
2017-04-04 16:28 ` [dpdk-dev] [PATCH v2 4/8] drivers/net: don't touch mbuf next or nb segs on Rx Olivier Matz
2017-04-04 16:28 ` [dpdk-dev] [PATCH v2 5/8] mbuf: make rearm data address naturally aligned Olivier Matz
2017-04-04 16:28 ` [dpdk-dev] [PATCH v2 6/8] mbuf: use 2 bytes for port and nb segments Olivier Matz
2017-04-06 5:45 ` Yuanhan Liu
2017-04-18 13:03 ` Olivier MATZ
2017-07-04 7:54 ` Wang, Zhihong
2017-07-10 8:00 ` Olivier Matz
2017-07-10 8:15 ` Morten Brørup
2017-07-11 13:25 ` Wiles, Keith
2017-07-11 13:30 ` Morten Brørup
2017-07-11 15:05 ` Thomas Monjalon
2017-07-11 15:23 ` [dpdk-dev] [PATCH v2 6/8] mbuf: use 2 bytes for port and nbsegments Morten Brørup
2017-07-11 16:48 ` Wiles, Keith
2017-07-12 7:25 ` Morten Brørup
2017-07-12 9:02 ` Yang, Zhiyong
2017-07-12 9:50 ` [dpdk-dev] [PATCH v2 6/8] mbuf: use 2 bytes for port andnbsegments Morten Brørup
2017-07-12 15:35 ` Stephen Hemminger
2017-07-12 15:57 ` Morten Brørup
2017-07-12 16:23 ` Thomas Monjalon
2017-07-12 18:20 ` Wiles, Keith
2017-07-21 15:03 ` Bruce Richardson
2017-07-12 15:34 ` [dpdk-dev] [PATCH v2 6/8] mbuf: use 2 bytes for port and nbsegments Wiles, Keith
2017-07-11 13:34 ` [dpdk-dev] [PATCH v2 6/8] mbuf: use 2 bytes for port and nb segments Wiles, Keith
2017-07-11 13:46 ` Olivier MATZ
2017-04-04 16:28 ` [dpdk-dev] [PATCH v2 7/8] mbuf: move sequence number in second cache line Olivier Matz
2017-04-04 16:28 ` [dpdk-dev] [PATCH v2 8/8] mbuf: add a timestamp field Olivier Matz
2017-04-05 9:37 ` [dpdk-dev] [PATCH v2 0/8] mbuf: structure reorganization Thomas Monjalon
2017-04-05 9:46 ` Olivier MATZ
2017-04-05 9:48 ` Richardson, Bruce
2017-04-05 12:06 ` Ferruh Yigit
2017-04-14 13:10 ` Ferruh Yigit
2017-04-18 13:04 ` Olivier MATZ
2017-04-19 9:39 ` Thomas Monjalon
2017-04-19 12:28 ` Olivier MATZ
2017-04-19 12:56 ` Thomas Monjalon
2017-04-19 13:03 ` Ferruh Yigit
2017-04-19 13:12 ` Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CALe+Z01vzfLsCuy8vvVMyoOPU72NwKK0fPmMcxAbRYXx+g6kPg@mail.gmail.com \
--to=jblunck@infradead.org \
--cc=dev@dpdk.org \
--cc=konstantin.ananyev@intel.com \
--cc=olivier.matz@6wind.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).