patches for DPDK stable branches
 help / color / mirror / Atom feed
From: Jan Blunck <jblunck@infradead.org>
To: Olivier Matz <olivier.matz@6wind.com>
Cc: dev <dev@dpdk.org>, Ilya Matveychikov <matvejchikov@gmail.com>,
	 Adrien Mazarguil <adrien.mazarguil@6wind.com>,
	sergio.gonzalez.monroy@intel.com,
	santosh.shukla@caviumnetworks.com, stable@dpdk.org
Subject: Re: [dpdk-stable] [PATCH v2] eal: don't advertise a physical address when no hugepages
Date: Mon, 3 Jul 2017 12:17:06 +0200	[thread overview]
Message-ID: <CALe+Z03uCcDCcvXjA2zykTozE_vcAPgMk5TEKeRU=F=zi1Bq7A@mail.gmail.com> (raw)
In-Reply-To: <20170703100407.21790-1-olivier.matz@6wind.com>

On Mon, Jul 3, 2017 at 12:04 PM, Olivier Matz <olivier.matz@6wind.com> wrote:
> When populating a mempool with a virtual memory area, the mempool
> library expects to be able to get the physical address of each page.
>
> When started with --no-huge, the physical addresses may not be available
> because the pages are not locked in memory. It sometimes returns
> RTE_BAD_PHYS_ADDR, which makes the mempool_populate() function to fail.
>
> This was working before the commit cdc242f260e7 ("eal/linux: support
> running as unprivileged user"), because rte_mem_virt2phy() was returning
> 0 instead of RTE_BAD_PHYS_ADDR, which was seen as a valid physical
> address.
>
> Since --no-huge is a debug function that breaks the support of physical
> drivers, always set physical addresses to RTE_BAD_PHYS_ADDR in memzones
> or in rte_mem_virt2phy(), and ensure that mempool won't complain in that
> case.
>
> Fixes: cdc242f260e7 ("eal/linux: support running as unprivileged user")
>
> CC: stable@dpdk.org
> Signed-off-by: Olivier Matz <olivier.matz@6wind.com>

Reviewed-by: Jan Blunck <jblunck@infradead.org>

> ---
>
> v1 -> v2:
> - initialize memory segments (rte_memseg) with RTE_BAD_PHYS_ADDR
>   if started with --no-huge
> - return RTE_BAD_PHYS_ADDR when rte_malloc_virt2phy() if the
>   memory segment has no physical address
> - drop change in eal_common_memzone.c: the physical address is
>   now set to RTE_BAD_PHYS_ADDR as per return value of
>   rte_malloc_virt2phy()
>
>
>  lib/librte_eal/common/include/rte_malloc.h | 2 +-
>  lib/librte_eal/common/rte_malloc.c         | 4 +++-
>  lib/librte_eal/linuxapp/eal/eal_memory.c   | 9 ++++++++-
>  lib/librte_mempool/rte_mempool.c           | 2 +-
>  4 files changed, 13 insertions(+), 4 deletions(-)
>
> diff --git a/lib/librte_eal/common/include/rte_malloc.h b/lib/librte_eal/common/include/rte_malloc.h
> index 61aac322b..3d37f79b8 100644
> --- a/lib/librte_eal/common/include/rte_malloc.h
> +++ b/lib/librte_eal/common/include/rte_malloc.h
> @@ -329,7 +329,7 @@ rte_malloc_set_limit(const char *type, size_t max);
>   * @param addr
>   *   Address obtained from a previous rte_malloc call
>   * @return
> - *   NULL on error
> + *   RTE_BAD_PHYS_ADDR on error
>   *   otherwise return physical address of the buffer
>   */
>  phys_addr_t
> diff --git a/lib/librte_eal/common/rte_malloc.c b/lib/librte_eal/common/rte_malloc.c
> index f4a883529..5c0627bf4 100644
> --- a/lib/librte_eal/common/rte_malloc.c
> +++ b/lib/librte_eal/common/rte_malloc.c
> @@ -253,6 +253,8 @@ rte_malloc_virt2phy(const void *addr)
>  {
>         const struct malloc_elem *elem = malloc_elem_from_data(addr);
>         if (elem == NULL)
> -               return 0;
> +               return RTE_BAD_PHYS_ADDR;
> +       if (elem->ms->phys_addr == RTE_BAD_PHYS_ADDR)
> +               return RTE_BAD_PHYS_ADDR;
>         return elem->ms->phys_addr + ((uintptr_t)addr - (uintptr_t)elem->ms->addr);
>  }
> diff --git a/lib/librte_eal/linuxapp/eal/eal_memory.c b/lib/librte_eal/linuxapp/eal/eal_memory.c
> index 647d89c58..040f24a43 100644
> --- a/lib/librte_eal/linuxapp/eal/eal_memory.c
> +++ b/lib/librte_eal/linuxapp/eal/eal_memory.c
> @@ -112,6 +112,13 @@ test_phys_addrs_available(void)
>         if (rte_xen_dom0_supported())
>                 return;
>
> +       if (!rte_eal_has_hugepages()) {
> +               RTE_LOG(ERR, EAL,
> +                       "Started without hugepages support, physical addresses not available\n");
> +               phys_addrs_available = false;
> +               return;
> +       }
> +
>         physaddr = rte_mem_virt2phy(&tmp);
>         if (physaddr == RTE_BAD_PHYS_ADDR) {
>                 RTE_LOG(ERR, EAL,
> @@ -1054,7 +1061,7 @@ rte_eal_hugepage_init(void)
>                                         strerror(errno));
>                         return -1;
>                 }
> -               mcfg->memseg[0].phys_addr = (phys_addr_t)(uintptr_t)addr;
> +               mcfg->memseg[0].phys_addr = RTE_BAD_PHYS_ADDR;
>                 mcfg->memseg[0].addr = addr;
>                 mcfg->memseg[0].hugepage_sz = RTE_PGSIZE_4K;
>                 mcfg->memseg[0].len = internal_config.memory;
> diff --git a/lib/librte_mempool/rte_mempool.c b/lib/librte_mempool/rte_mempool.c
> index f65310f60..6fc3c9c7c 100644
> --- a/lib/librte_mempool/rte_mempool.c
> +++ b/lib/librte_mempool/rte_mempool.c
> @@ -476,7 +476,7 @@ rte_mempool_populate_virt(struct rte_mempool *mp, char *addr,
>                 /* required for xen_dom0 to get the machine address */
>                 paddr = rte_mem_phy2mch(-1, paddr);
>
> -               if (paddr == RTE_BAD_PHYS_ADDR) {
> +               if (paddr == RTE_BAD_PHYS_ADDR && rte_eal_has_hugepages()) {
>                         ret = -EINVAL;
>                         goto fail;
>                 }
> --
> 2.11.0
>

  reply	other threads:[~2017-07-03 10:17 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20170609102727.0eb7f39d@platinum>
2017-06-09  8:29 ` [dpdk-stable] [PATCH] " Olivier Matz
2017-06-10  8:31   ` Jan Blunck
2017-06-23  8:11     ` Olivier Matz
2017-06-23 17:08       ` Jan Blunck
2017-06-26  7:11         ` [dpdk-stable] [dpdk-dev] " santosh
2017-06-12 13:58   ` [dpdk-stable] " Adrien Mazarguil
2017-07-03 10:04   ` [dpdk-stable] [PATCH v2] " Olivier Matz
2017-07-03 10:17     ` Jan Blunck [this message]
2017-07-04 15:53       ` Thomas Monjalon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CALe+Z03uCcDCcvXjA2zykTozE_vcAPgMk5TEKeRU=F=zi1Bq7A@mail.gmail.com' \
    --to=jblunck@infradead.org \
    --cc=adrien.mazarguil@6wind.com \
    --cc=dev@dpdk.org \
    --cc=matvejchikov@gmail.com \
    --cc=olivier.matz@6wind.com \
    --cc=santosh.shukla@caviumnetworks.com \
    --cc=sergio.gonzalez.monroy@intel.com \
    --cc=stable@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).