From: David Marchand <david.marchand@6wind.com>
To: "Chen Jing D(Mark)" <jing.d.chen@intel.com>
Cc: "dev@dpdk.org" <dev@dpdk.org>
Subject: Re: [dpdk-dev] [PATCH 03/18] fm10k: Add empty fm10k files
Date: Sun, 1 Feb 2015 14:01:27 +0100 [thread overview]
Message-ID: <CALwxeUuzS5ns7buzXp2phvMZJ4Nckkf32GQWJ6oPcu=kzZDU5A@mail.gmail.com> (raw)
In-Reply-To: <1422594454-11045-4-git-send-email-jing.d.chen@intel.com>
On Fri, Jan 30, 2015 at 6:07 AM, Chen Jing D(Mark) <jing.d.chen@intel.com>
wrote:
> From: Jeff Shaw <jeffrey.b.shaw@intel.com>
>
> Define macros and basic data structure.
> Define rte_log wrapper functions.
>
This comment applies to the logs macro (and the rest of the patchset).
- don't use a build option for logs to be displayed, especially if these
are init messages or error messages that prevent the pmd from working
- you can remove this "Use RTE_LOG directly to make sure this error is
seen." in fm10k_rx_queue_setup if you use a "init" macro that is not under
a build option
- don't use \n in logs, only one is enough
Please, check the cleanup work that has been done in other Intel pmd (for
example, ixgbe).
I would really prefer we have consistent logs across dpdk.
--
David Marchand
>
> Signed-off-by: Jeff Shaw <jeffrey.b.shaw@intel.com>
> Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
> ---
> lib/librte_pmd_fm10k/Makefile | 96 ++++++++++++++++
> lib/librte_pmd_fm10k/fm10k.h | 224
> +++++++++++++++++++++++++++++++++++++
> lib/librte_pmd_fm10k/fm10k_logs.h | 66 +++++++++++
> 3 files changed, 386 insertions(+), 0 deletions(-)
> create mode 100644 lib/librte_pmd_fm10k/Makefile
> create mode 100644 lib/librte_pmd_fm10k/fm10k.h
> create mode 100644 lib/librte_pmd_fm10k/fm10k_ethdev.c
> create mode 100644 lib/librte_pmd_fm10k/fm10k_logs.h
> create mode 100644 lib/librte_pmd_fm10k/fm10k_rxtx.c
>
> diff --git a/lib/librte_pmd_fm10k/Makefile b/lib/librte_pmd_fm10k/Makefile
> new file mode 100644
> index 0000000..3d76387
> --- /dev/null
> +++ b/lib/librte_pmd_fm10k/Makefile
> @@ -0,0 +1,96 @@
> +# BSD LICENSE
> +#
> +# Copyright(c) 2013-2014 Intel Corporation. All rights reserved.
> +# All rights reserved.
> +#
> +# Redistribution and use in source and binary forms, with or without
> +# modification, are permitted provided that the following conditions
> +# are met:
> +#
> +# * Redistributions of source code must retain the above copyright
> +# notice, this list of conditions and the following disclaimer.
> +# * Redistributions in binary form must reproduce the above copyright
> +# notice, this list of conditions and the following disclaimer in
> +# the documentation and/or other materials provided with the
> +# distribution.
> +# * Neither the name of Intel Corporation nor the names of its
> +# contributors may be used to endorse or promote products derived
> +# from this software without specific prior written permission.
> +#
> +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
> +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
> +# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
> +# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
> +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
> +# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
> +# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
> +# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> +# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
> +# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> +
> +include $(RTE_SDK)/mk/rte.vars.mk
> +
> +#
> +# library name
> +#
> +LIB = librte_pmd_fm10k.a
> +
> +CFLAGS += -O3
> +CFLAGS += $(WERROR_FLAGS)
> +
> +ifeq ($(CC), icc)
> +#
> +# CFLAGS for icc
> +#
> +CFLAGS_BASE_DRIVER = -wd174 -wd593 -wd869 -wd981 -wd2259
> +
> +else ifeq ($(CC), clang)
> +#
> +## CFLAGS for clang
> +#
> +CFLAGS_BASE_DRIVER = -Wno-unused-parameter -Wno-unused-value
> +CFLAGS_BASE_DRIVER += -Wno-strict-aliasing -Wno-format-extra-args
> +CFLAGS_BASE_DRIVER += -Wno-unused-variable -Wno-unused-but-set-variable
> +CFLAGS_BASE_DRIVER += -Wno-missing-field-initializers
> +
> +else
> +#
> +# CFLAGS for gcc
> +#
> +ifneq ($(shell test $(GCC_MAJOR_VERSION) -le 4 -a $(GCC_MINOR_VERSION)
> -le 3 && echo 1), 1)
> +CFLAGS += -Wno-deprecated
> +endif
> +CFLAGS_BASE_DRIVER = -Wno-unused-parameter -Wno-unused-value
> +CFLAGS_BASE_DRIVER += -Wno-strict-aliasing -Wno-format-extra-args
> +CFLAGS_BASE_DRIVER += -Wno-unused-variable -Wno-unused-but-set-variable
> +CFLAGS_BASE_DRIVER += -Wno-missing-field-initializers
> +endif
> +
> +#
> +# Add extra flags for base driver source files to disable warnings in them
> +#
> +BASE_DRIVER_OBJS=$(patsubst %.c,%.o,$(notdir $(wildcard
> $(RTE_SDK)/lib/librte_pmd_fm10k/SHARED/*.c)))
> +$(foreach obj, $(BASE_DRIVER_OBJS), $(eval
> CFLAGS_$(obj)+=$(CFLAGS_BASE_DRIVER)))
> +
> +VPATH += $(RTE_SDK)/lib/librte_pmd_fm10k/SHARED
> +
> +#
> +# all source are stored in SRCS-y
> +#
> +SRCS-$(CONFIG_RTE_LIBRTE_FM10K_PMD) += fm10k_ethdev.c
> +SRCS-$(CONFIG_RTE_LIBRTE_FM10K_PMD) += fm10k_rxtx.c
> +
> +SRCS-$(CONFIG_RTE_LIBRTE_FM10K_PMD) += fm10k_pf.c
> +SRCS-$(CONFIG_RTE_LIBRTE_FM10K_PMD) += fm10k_tlv.c
> +SRCS-$(CONFIG_RTE_LIBRTE_FM10K_PMD) += fm10k_common.c
> +SRCS-$(CONFIG_RTE_LIBRTE_FM10K_PMD) += fm10k_mbx.c
> +SRCS-$(CONFIG_RTE_LIBRTE_FM10K_PMD) += fm10k_vf.c
> +SRCS-$(CONFIG_RTE_LIBRTE_FM10K_PMD) += fm10k_api.c
> +
> +# this lib depends upon:
> +DEPDIRS-$(CONFIG_RTE_LIBRTE_FM10K_PMD) += lib/librte_eal lib/librte_ether
> +DEPDIRS-$(CONFIG_RTE_LIBRTE_FM10K_PMD) += lib/librte_mempool
> lib/librte_mbuf
> +DEPDIRS-$(CONFIG_RTE_LIBRTE_FM10K_PMD) += lib/librte_net lib/librte_malloc
> +
> +include $(RTE_SDK)/mk/rte.lib.mk
> diff --git a/lib/librte_pmd_fm10k/fm10k.h b/lib/librte_pmd_fm10k/fm10k.h
> new file mode 100644
> index 0000000..9b2d3da
> --- /dev/null
> +++ b/lib/librte_pmd_fm10k/fm10k.h
> @@ -0,0 +1,224 @@
> +/*-
> + * BSD LICENSE
> + *
> + * Copyright(c) 2013-2014 Intel Corporation. All rights reserved.
> + * All rights reserved.
> + *
> + * Redistribution and use in source and binary forms, with or without
> + * modification, are permitted provided that the following conditions
> + * are met:
> + *
> + * * Redistributions of source code must retain the above copyright
> + * notice, this list of conditions and the following disclaimer.
> + * * Redistributions in binary form must reproduce the above copyright
> + * notice, this list of conditions and the following disclaimer in
> + * the documentation and/or other materials provided with the
> + * distribution.
> + * * Neither the name of Intel Corporation nor the names of its
> + * contributors may be used to endorse or promote products derived
> + * from this software without specific prior written permission.
> + *
> + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
> + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
> + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
> + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
> + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
> + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
> + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
> + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
> + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> + */
> +
> +#ifndef _FM10K_H_
> +#define _FM10K_H_
> +
> +#include <stdint.h>
> +#include <rte_mbuf.h>
> +#include <rte_mempool.h>
> +#include <rte_malloc.h>
> +#include <rte_spinlock.h>
> +#include "fm10k_logs.h"
> +#include "SHARED/fm10k_type.h"
> +
> +/* descriptor ring base addresses must be aligned to the following */
> +#define FM10K_ALIGN_RX_DESC 128
> +#define FM10K_ALIGN_TX_DESC 128
> +
> +/* The maximum packet size that FM10K supports */
> +#define FM10K_MAX_PKT_SIZE (15 * 1024)
> +
> +/* Minimum size of RX buffer FM10K supported */
> +#define FM10K_MIN_RX_BUF_SIZE 256
> +
> +/* The maximum of SRIOV VFs per port supported */
> +#define FM10K_MAX_VF_NUM 64
> +
> +/* number of descriptors must be a multiple of the following */
> +#define FM10K_MULT_RX_DESC FM10K_REQ_RX_DESCRIPTOR_MULTIPLE
> +#define FM10K_MULT_TX_DESC FM10K_REQ_TX_DESCRIPTOR_MULTIPLE
> +
> +/* maximum size of descriptor rings */
> +#define FM10K_MAX_RX_RING_SZ (512 * 1024)
> +#define FM10K_MAX_TX_RING_SZ (512 * 1024)
> +
> +/* minimum and maximum number of descriptors in a ring */
> +#define FM10K_MIN_RX_DESC 32
> +#define FM10K_MIN_TX_DESC 32
> +#define FM10K_MAX_RX_DESC (FM10K_MAX_RX_RING_SZ / sizeof(union
> fm10k_rx_desc))
> +#define FM10K_MAX_TX_DESC (FM10K_MAX_TX_RING_SZ / sizeof(struct
> fm10k_tx_desc))
> +
> +/*
> + * byte aligment for HW RX data buffer
> + * Datasheet requires RX buffer addresses shall either be 512-byte
> aligned or
> + * be 8-byte aligned but without crossing host memory pages (4KB alignment
> + * boundaries). Satisfy first option.
> + */
> +#define FM10K_RX_DATABUF_ALIGN 512
> +
> +/*
> + * threshold default, min, max, and divisor constraints
> + * the configured values must satisfy the following:
> + * MIN <= value <= MAX
> + * DIV % value == 0
> + */
> +#define FM10K_RX_FREE_THRESH_DEFAULT(rxq) 32
> +#define FM10K_RX_FREE_THRESH_MIN(rxq) 1
> +#define FM10K_RX_FREE_THRESH_MAX(rxq) ((rxq)->nb_desc - 1)
> +#define FM10K_RX_FREE_THRESH_DIV(rxq) ((rxq)->nb_desc)
> +
> +#define FM10K_TX_FREE_THRESH_DEFAULT(txq) 32
> +#define FM10K_TX_FREE_THRESH_MIN(txq) 1
> +#define FM10K_TX_FREE_THRESH_MAX(txq) ((txq)->nb_desc - 3)
> +#define FM10K_TX_FREE_THRESH_DIV(txq) 0
> +
> +#define FM10K_DEFAULT_RX_PTHRESH 8
> +#define FM10K_DEFAULT_RX_HTHRESH 8
> +#define FM10K_DEFAULT_RX_WTHRESH 0
> +
> +#define FM10K_DEFAULT_TX_PTHRESH 32
> +#define FM10K_DEFAULT_TX_HTHRESH 0
> +#define FM10K_DEFAULT_TX_WTHRESH 0
> +
> +#define FM10K_TX_RS_THRESH_DEFAULT(txq) 32
> +#define FM10K_TX_RS_THRESH_MIN(txq) 1
> +#define FM10K_TX_RS_THRESH_MAX(txq) \
> + RTE_MIN(((txq)->nb_desc - 2), (txq)->free_thresh)
> +#define FM10K_TX_RS_THRESH_DIV(txq) ((txq)->nb_desc)
> +
> +#define FM10K_VLAN_TAG_SIZE 4
> +
> +struct fm10k_dev_info {
> + volatile uint32_t enable;
> + volatile uint32_t glort;
> + /* Protect the mailbox to avoid race condition */
> + rte_spinlock_t mbx_lock;
> +};
> +
> +/*
> + * Structure to store private data for each driver instance.
> + */
> +struct fm10k_adapter {
> + struct fm10k_hw hw;
> + struct fm10k_hw_stats stats;
> + struct fm10k_dev_info info;
> +};
> +
> +#define FM10K_DEV_PRIVATE_TO_HW(adapter) \
> + (&((struct fm10k_adapter *)adapter)->hw)
> +
> +#define FM10K_DEV_PRIVATE_TO_STATS(adapter) \
> + (&((struct fm10k_adapter *)adapter)->stats)
> +
> +#define FM10K_DEV_PRIVATE_TO_INFO(adapter) \
> + (&((struct fm10k_adapter *)adapter)->info)
> +
> +#define FM10K_DEV_PRIVATE_TO_MBXLOCK(adapter) \
> + (&(((struct fm10k_adapter *)adapter)->info.mbx_lock))
> +
> +struct fm10k_rx_queue {
> + struct rte_mempool *mp;
> + struct rte_mbuf **sw_ring;
> + volatile union fm10k_rx_desc *hw_ring;
> + struct rte_mbuf *pkt_first_seg; /**< First segment of current
> packet. */
> + struct rte_mbuf *pkt_last_seg; /**< Last segment of current
> packet. */
> + uint64_t hw_ring_phys_addr;
> + uint16_t next_dd;
> + uint16_t next_alloc;
> + uint16_t next_trigger;
> + uint16_t alloc_thresh;
> + volatile uint32_t *tail_ptr;
> + uint16_t nb_desc;
> + uint16_t queue_id;
> + uint8_t port_id;
> + uint8_t drop_en;
> + uint8_t rx_deferred_start; /** < don't start this queue in dev
> start. */
> +};
> +
> +/*
> + * a FIFO is used to track which descriptors have their RS bit set for Tx
> + * queues which are configured to allow multiple descriptors per packet
> + */
> +struct fifo {
> + uint16_t *list;
> + uint16_t *head;
> + uint16_t *tail;
> + uint16_t *endp;
> +};
> +
> +struct fm10k_tx_queue {
> + struct rte_mbuf **sw_ring;
> + struct fm10k_tx_desc *hw_ring;
> + uint64_t hw_ring_phys_addr;
> + struct fifo rs_tracker;
> + uint16_t last_free;
> + uint16_t next_free;
> + uint16_t nb_free;
> + uint16_t nb_used;
> + uint16_t free_trigger;
> + uint16_t free_thresh;
> + uint16_t rs_thresh;
> + volatile uint32_t *tail_ptr;
> + uint16_t nb_desc;
> + uint8_t port_id;
> + uint8_t tx_deferred_start; /** < don't start this queue in dev
> start. */
> + uint16_t queue_id;
> +};
> +
> +#define MBUF_DMA_ADDR(mb) \
> + ((uint64_t) ((mb)->buf_physaddr + (mb)->data_off))
> +
> +/* enforce 512B alignment on default Rx DMA addresses */
> +#define MBUF_DMA_ADDR_DEFAULT(mb) \
> + ((uint64_t) RTE_ALIGN(((mb)->buf_physaddr + RTE_PKTMBUF_HEADROOM),
> 512))
> +
> +static inline void fifo_reset(struct fifo *fifo, uint32_t len)
> +{
> + fifo->head = fifo->tail = fifo->list;
> + fifo->endp = fifo->list + len;
> +}
> +
> +static inline void fifo_insert(struct fifo *fifo, uint16_t val)
> +{
> + *fifo->head = val;
> + if (++fifo->head == fifo->endp)
> + fifo->head = fifo->list;
> +}
> +
> +/* do not worry about list being empty since we only check it once we know
> + * we have used enough descriptors to set the RS bit at least once */
> +static inline uint16_t fifo_peek(struct fifo *fifo)
> +{
> + return *fifo->tail;
> +}
> +
> +static inline uint16_t fifo_remove(struct fifo *fifo)
> +{
> + uint16_t val;
> + val = *fifo->tail;
> + if (++fifo->tail == fifo->endp)
> + fifo->tail = fifo->list;
> + return val;
> +}
> +#endif
> diff --git a/lib/librte_pmd_fm10k/fm10k_ethdev.c
> b/lib/librte_pmd_fm10k/fm10k_ethdev.c
> new file mode 100644
> index 0000000..e69de29
> diff --git a/lib/librte_pmd_fm10k/fm10k_logs.h
> b/lib/librte_pmd_fm10k/fm10k_logs.h
> new file mode 100644
> index 0000000..0b4cd24
> --- /dev/null
> +++ b/lib/librte_pmd_fm10k/fm10k_logs.h
> @@ -0,0 +1,66 @@
> +/*-
> + * BSD LICENSE
> + *
> + * Copyright(c) 2013-2014 Intel Corporation. All rights reserved.
> + * All rights reserved.
> + *
> + * Redistribution and use in source and binary forms, with or without
> + * modification, are permitted provided that the following conditions
> + * are met:
> + *
> + * * Redistributions of source code must retain the above copyright
> + * notice, this list of conditions and the following disclaimer.
> + * * Redistributions in binary form must reproduce the above copyright
> + * notice, this list of conditions and the following disclaimer in
> + * the documentation and/or other materials provided with the
> + * distribution.
> + * * Neither the name of Intel Corporation nor the names of its
> + * contributors may be used to endorse or promote products derived
> + * from this software without specific prior written permission.
> + *
> + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
> + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
> + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
> + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
> + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
> + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
> + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
> + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
> + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> + */
> +
> +#ifndef _FM10K_LOGS_H_
> +#define _FM10K_LOGS_H_
> +
> +#include <rte_log.h>
> +
> +#ifdef RTE_LIBRTE_FM10K_DEBUG
> +#define PMD_LOG(level, fmt, args...) \
> + RTE_LOG(level, PMD, "%s(): " fmt "\n", __func__, ## args)
> +#define PMD_FUNC_TRACE() PMD_LOG(DEBUG, " >>")
> +#else
> +#define PMD_LOG(level, fmt, args...) do { } while (0)
> +#define PMD_FUNC_TRACE() do { } while (0)
> +#endif
> +
> +#ifdef RTE_LIBRTE_FM10K_DEBUG_RX
> +#define PMD_LOG_RX(level, fmt, args...) \
> + RTE_LOG(level, PMD, "%s(): " fmt "\n", __func__, ## args)
> +#define PMD_FUNC_TRACE_RX() PMD_LOG_RX(DEBUG, " >>")
> +#else
> +#define PMD_LOG_RX(level, fmt, args...) do { } while (0)
> +#define PMD_FUNC_TRACE_RX() do { } while (0)
> +#endif
> +
> +#ifdef RTE_LIBRTE_FM10K_DEBUG_TX
> +#define PMD_LOG_TX(level, fmt, args...) \
> + RTE_LOG(level, PMD, "%s(): " fmt "\n", __func__, ## args)
> +#define PMD_FUNC_TRACE_TX() PMD_LOG_TX(DEBUG, " >>")
> +#else
> +#define PMD_LOG_TX(level, fmt, args...) do { } while (0)
> +#define PMD_FUNC_TRACE_TX() do { } while (0)
> +#endif
> +
> +#endif /* _FM10K_LOGS_H_ */
> diff --git a/lib/librte_pmd_fm10k/fm10k_rxtx.c
> b/lib/librte_pmd_fm10k/fm10k_rxtx.c
> new file mode 100644
> index 0000000..e69de29
> --
> 1.7.7.6
>
>
next prev parent reply other threads:[~2015-02-01 13:01 UTC|newest]
Thread overview: 147+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-30 5:07 [dpdk-dev] [PATCH 00/18] lib/librte_pmd_fm10k : fm10k pmd driver Chen Jing D(Mark)
2015-01-30 5:07 ` [dpdk-dev] [PATCH 01/18] fm10k: add base driver Chen Jing D(Mark)
2015-02-04 10:40 ` [dpdk-dev] [PATCH v2 00/15] lib/librte_pmd_fm10k : fm10k pmd driver Chen Jing D(Mark)
2015-02-04 10:40 ` [dpdk-dev] [PATCH v2 01/15] fm10k: add base driver Chen Jing D(Mark)
2015-02-10 7:02 ` [dpdk-dev] [PATCH v3 00/15] lib/librte_pmd_fm10k : fm10k pmd driver Chen Jing D(Mark)
2015-02-10 7:02 ` [dpdk-dev] [PATCH v3 01/15] fm10k: add base driver Chen Jing D(Mark)
2015-02-11 1:31 ` [dpdk-dev] [PATCH v4 00/15] lib/librte_pmd_fm10k : fm10k pmd driver Chen Jing D(Mark)
2015-02-11 1:31 ` [dpdk-dev] [PATCH v4 01/15] fm10k: add base driver Chen Jing D(Mark)
2015-02-13 8:19 ` [dpdk-dev] [PATCH v5 00/17] lib/librte_pmd_fm10k : fm10k pmd driver Chen Jing D(Mark)
2015-02-13 8:19 ` [dpdk-dev] [PATCH v5 01/17] fm10k: add base driver Chen Jing D(Mark)
2015-02-17 14:18 ` [dpdk-dev] [PATCH v6 00/16] lib/librte_pmd_fm10k : fm10k pmd driver Chen Jing D(Mark)
2015-02-17 14:18 ` [dpdk-dev] [PATCH v6 01/16] fm10k: add base driver Chen Jing D(Mark)
2015-02-17 14:18 ` [dpdk-dev] [PATCH v6 02/16] eal: add fm10k device id Chen Jing D(Mark)
2015-02-17 14:18 ` [dpdk-dev] [PATCH v6 03/16] fm10k: register fm10k pmd PF driver Chen Jing D(Mark)
2015-02-17 14:18 ` [dpdk-dev] [PATCH v6 04/16] config: change config files to add fm10k into compile Chen Jing D(Mark)
2015-02-17 14:18 ` [dpdk-dev] [PATCH v6 05/16] fm10k: add reta update/requery functions Chen Jing D(Mark)
2015-02-17 14:18 ` [dpdk-dev] [PATCH v6 06/16] fm10k: add Rx queue setup/release function Chen Jing D(Mark)
2015-02-17 14:18 ` [dpdk-dev] [PATCH v6 07/16] fm10k: add Tx " Chen Jing D(Mark)
2015-02-17 14:18 ` [dpdk-dev] [PATCH v6 08/16] fm10k: add Rx/Tx single queue start/stop function Chen Jing D(Mark)
2015-02-17 14:18 ` [dpdk-dev] [PATCH v6 09/16] fm10k: add dev start/stop functions Chen Jing D(Mark)
2015-02-17 14:18 ` [dpdk-dev] [PATCH v6 10/16] fm10k: add receive and tranmit function Chen Jing D(Mark)
2015-02-17 14:18 ` [dpdk-dev] [PATCH v6 11/16] fm10k: add PF RSS support Chen Jing D(Mark)
2015-02-17 14:18 ` [dpdk-dev] [PATCH v6 12/16] fm10k: add scatter receive function Chen Jing D(Mark)
2015-02-17 14:18 ` [dpdk-dev] [PATCH v6 13/16] fm10k: add function to set vlan Chen Jing D(Mark)
2015-02-17 14:18 ` [dpdk-dev] [PATCH v6 14/16] fm10k: add SRIOV-VF support Chen Jing D(Mark)
2015-02-17 14:18 ` [dpdk-dev] [PATCH v6 15/16] fm10k: add PF and VF interrupt handling function Chen Jing D(Mark)
2015-02-17 14:18 ` [dpdk-dev] [PATCH v6 16/16] maintainers: claim for fm10k review Chen Jing D(Mark)
2015-02-18 0:13 ` [dpdk-dev] [PATCH v6 00/16] lib/librte_pmd_fm10k : fm10k pmd driver Thomas Monjalon
2015-02-13 8:19 ` [dpdk-dev] [PATCH v5 02/17] eal: add fm10k device id Chen Jing D(Mark)
2015-02-13 8:19 ` [dpdk-dev] [PATCH v5 03/17] fm10k: register fm10k pmd PF driver Chen Jing D(Mark)
2015-02-13 8:19 ` [dpdk-dev] [PATCH v5 04/17] Change config files to add fm10k into compile Chen Jing D(Mark)
2015-02-13 8:19 ` [dpdk-dev] [PATCH v5 05/17] fm10k: add reta update/requery functions Chen Jing D(Mark)
2015-02-13 8:19 ` [dpdk-dev] [PATCH v5 06/17] fm10k: add rx_queue_setup/release function Chen Jing D(Mark)
2015-02-13 11:08 ` David Marchand
2015-02-17 13:01 ` Chen, Jing D
2015-02-13 8:19 ` [dpdk-dev] [PATCH v5 07/17] fm10k: add tx_queue_setup/release function Chen Jing D(Mark)
2015-02-13 8:19 ` [dpdk-dev] [PATCH v5 08/17] fm10k: add RX/TX single queue start/stop function Chen Jing D(Mark)
2015-02-13 11:31 ` David Marchand
2015-02-13 16:45 ` Jeff Shaw
2015-02-13 8:19 ` [dpdk-dev] [PATCH v5 09/17] fm10k: add dev start/stop functions Chen Jing D(Mark)
2015-02-13 8:19 ` [dpdk-dev] [PATCH v5 10/17] fm10k: add receive and tranmit function Chen Jing D(Mark)
2015-02-13 11:42 ` David Marchand
2015-02-17 13:07 ` Chen, Jing D
2015-02-13 11:53 ` David Marchand
2015-02-17 13:10 ` Chen, Jing D
2015-02-13 8:19 ` [dpdk-dev] [PATCH v5 11/17] fm10k: add PF RSS support Chen Jing D(Mark)
2015-02-13 8:19 ` [dpdk-dev] [PATCH v5 12/17] fm10k: Add scatter receive function Chen Jing D(Mark)
2015-02-13 11:55 ` David Marchand
2015-02-17 13:11 ` Chen, Jing D
2015-02-13 8:19 ` [dpdk-dev] [PATCH v5 13/17] fm10k: add function to set vlan Chen Jing D(Mark)
2015-02-13 8:19 ` [dpdk-dev] [PATCH v5 14/17] fm10k: Add SRIOV-VF support Chen Jing D(Mark)
2015-02-13 8:19 ` [dpdk-dev] [PATCH v5 15/17] fm10k: add PF and VF interrupt handling function Chen Jing D(Mark)
2015-02-13 11:42 ` David Marchand
2015-02-17 13:12 ` Chen, Jing D
2015-02-13 8:19 ` [dpdk-dev] [PATCH v5 16/17] maintainers: claim for fm10k review Chen Jing D(Mark)
2015-02-13 8:19 ` [dpdk-dev] [PATCH v5 17/17] fm10k: Add ABI version of librte_pmd_fm10k Chen Jing D(Mark)
2015-02-13 8:37 ` [dpdk-dev] [PATCH v5 00/17] lib/librte_pmd_fm10k : fm10k pmd driver Zhang, Helin
2015-02-15 5:07 ` Qiu, Michael
2015-02-11 1:31 ` [dpdk-dev] [PATCH v4 02/15] eal: add fm10k device id Chen Jing D(Mark)
2015-02-11 1:31 ` [dpdk-dev] [PATCH v4 03/15] fm10k: register fm10k pmd PF driver Chen Jing D(Mark)
2015-02-11 1:31 ` [dpdk-dev] [PATCH v4 04/15] Change config files to add fm10k into compile Chen Jing D(Mark)
2015-02-11 1:31 ` [dpdk-dev] [PATCH v4 05/15] fm10k: add reta update/requery functions Chen Jing D(Mark)
2015-02-11 1:31 ` [dpdk-dev] [PATCH v4 06/15] fm10k: add rx_queue_setup/release function Chen Jing D(Mark)
2015-02-11 1:31 ` [dpdk-dev] [PATCH v4 07/15] fm10k: add tx_queue_setup/release function Chen Jing D(Mark)
2015-02-11 1:31 ` [dpdk-dev] [PATCH v4 08/15] fm10k: add RX/TX single queue start/stop function Chen Jing D(Mark)
2015-02-11 1:31 ` [dpdk-dev] [PATCH v4 09/15] fm10k: add dev start/stop functions Chen Jing D(Mark)
2015-02-11 1:31 ` [dpdk-dev] [PATCH v4 10/15] fm10k: add receive and tranmit function Chen Jing D(Mark)
2015-02-11 17:28 ` Jeff Shaw
2015-02-12 4:04 ` Chen, Jing D
2015-02-11 1:31 ` [dpdk-dev] [PATCH v4 11/15] fm10k: add PF RSS support Chen Jing D(Mark)
2015-02-11 1:31 ` [dpdk-dev] [PATCH v4 12/15] fm10k: Add scatter receive function Chen Jing D(Mark)
2015-02-11 17:32 ` Jeff Shaw
2015-02-12 4:04 ` Chen, Jing D
2015-02-11 1:31 ` [dpdk-dev] [PATCH v4 13/15] fm10k: add function to set vlan Chen Jing D(Mark)
2015-02-11 1:31 ` [dpdk-dev] [PATCH v4 14/15] fm10k: Add SRIOV-VF support Chen Jing D(Mark)
2015-02-11 1:31 ` [dpdk-dev] [PATCH v4 15/15] fm10k: add PF and VF interrupt handling function Chen Jing D(Mark)
2015-02-11 1:50 ` [dpdk-dev] [PATCH v4 00/15] lib/librte_pmd_fm10k : fm10k pmd driver Qiu, Michael
2015-02-10 7:02 ` [dpdk-dev] [PATCH v3 02/15] eal: add fm10k device id Chen Jing D(Mark)
2015-02-10 7:02 ` [dpdk-dev] [PATCH v3 03/15] fm10k: register fm10k pmd PF driver Chen Jing D(Mark)
2015-02-10 7:02 ` [dpdk-dev] [PATCH v3 04/15] Change config files to add fm10k into compile Chen Jing D(Mark)
2015-02-10 7:02 ` [dpdk-dev] [PATCH v3 05/15] fm10k: add reta update/requery functions Chen Jing D(Mark)
2015-02-10 7:02 ` [dpdk-dev] [PATCH v3 06/15] fm10k: add rx_queue_setup/release function Chen Jing D(Mark)
2015-02-10 7:02 ` [dpdk-dev] [PATCH v3 07/15] fm10k: add tx_queue_setup/release function Chen Jing D(Mark)
2015-02-10 7:02 ` [dpdk-dev] [PATCH v3 08/15] fm10k: add RX/TX single queue start/stop function Chen Jing D(Mark)
2015-02-10 7:02 ` [dpdk-dev] [PATCH v3 09/15] fm10k: add dev start/stop functions Chen Jing D(Mark)
2015-02-10 7:02 ` [dpdk-dev] [PATCH v3 10/15] fm10k: add receive and tranmit function Chen Jing D(Mark)
2015-02-10 7:02 ` [dpdk-dev] [PATCH v3 11/15] fm10k: add PF RSS support Chen Jing D(Mark)
2015-02-10 7:02 ` [dpdk-dev] [PATCH v3 12/15] fm10k: Add scatter receive function Chen Jing D(Mark)
2015-02-10 7:02 ` [dpdk-dev] [PATCH v3 13/15] fm10k: add function to set vlan Chen Jing D(Mark)
2015-02-10 7:02 ` [dpdk-dev] [PATCH v3 14/15] fm10k: Add SRIOV-VF support Chen Jing D(Mark)
2015-02-10 7:02 ` [dpdk-dev] [PATCH v3 15/15] fm10k: add PF and VF interrupt handling function Chen Jing D(Mark)
2015-02-04 10:40 ` [dpdk-dev] [PATCH v2 02/15] fm10k: add fm10k device id Chen Jing D(Mark)
2015-02-04 10:40 ` [dpdk-dev] [PATCH v2 03/15] fm10k: register fm10k pmd PF driver Chen Jing D(Mark)
2015-02-04 10:40 ` [dpdk-dev] [PATCH v2 04/15] Change config files to add fm10k into compile Chen Jing D(Mark)
2015-02-04 10:40 ` [dpdk-dev] [PATCH v2 05/15] fm10k: add reta update/requery functions Chen Jing D(Mark)
2015-02-04 10:40 ` [dpdk-dev] [PATCH v2 06/15] fm10k: add rx_queue_setup/release function Chen Jing D(Mark)
2015-02-04 10:40 ` [dpdk-dev] [PATCH v2 07/15] fm10k: add tx_queue_setup/release function Chen Jing D(Mark)
2015-02-04 10:40 ` [dpdk-dev] [PATCH v2 08/15] fm10k: add RX/TX single queue start/stop function Chen Jing D(Mark)
2015-02-04 10:40 ` [dpdk-dev] [PATCH v2 09/15] fm10k: add dev start/stop functions Chen Jing D(Mark)
2015-02-04 10:40 ` [dpdk-dev] [PATCH v2 10/15] fm10k: add receive and tranmit function Chen Jing D(Mark)
2015-02-04 10:40 ` [dpdk-dev] [PATCH v2 11/15] fm10k: add PF RSS support Chen Jing D(Mark)
2015-02-04 10:40 ` [dpdk-dev] [PATCH v2 12/15] fm10k: Add scatter receive function Chen Jing D(Mark)
2015-02-04 10:40 ` [dpdk-dev] [PATCH v2 13/15] fm10k: add function to set vlan Chen Jing D(Mark)
2015-02-04 10:40 ` [dpdk-dev] [PATCH v2 14/15] fm10k: Add SRIOV-VF support Chen Jing D(Mark)
2015-02-04 10:41 ` [dpdk-dev] [PATCH v2 15/15] fm10k: add PF and VF interrupt handling function Chen Jing D(Mark)
2015-01-30 5:07 ` [dpdk-dev] [PATCH 02/18] Change config/ files to add macros for fm10k Chen Jing D(Mark)
2015-01-30 5:07 ` [dpdk-dev] [PATCH 03/18] fm10k: Add empty fm10k files Chen Jing D(Mark)
2015-01-31 14:02 ` Neil Horman
2015-02-02 5:34 ` Chen, Jing D
[not found] ` <20150202133848.GA21700@hmsreliant.think-freely.org>
2015-02-03 6:47 ` Chen, Jing D
2015-02-01 13:01 ` David Marchand [this message]
2015-01-30 5:07 ` [dpdk-dev] [PATCH 04/18] fm10k: add fm10k device id Chen Jing D(Mark)
2015-01-31 14:19 ` Neil Horman
2015-01-31 16:07 ` David Marchand
2015-01-31 16:32 ` Neil Horman
2015-01-31 16:55 ` David Marchand
2015-01-31 18:35 ` Neil Horman
2015-05-07 11:06 ` David Marchand
2015-05-07 13:36 ` Neil Horman
2015-05-07 13:39 ` David Marchand
2015-02-02 7:54 ` Chen, Jing D
2015-01-30 5:07 ` [dpdk-dev] [PATCH 05/18] fm10k: Add code to register fm10k pmd PF driver Chen Jing D(Mark)
2015-01-30 5:07 ` [dpdk-dev] [PATCH 06/18] fm10k: add reta update/requery functions Chen Jing D(Mark)
2015-01-30 5:07 ` [dpdk-dev] [PATCH 07/18] fm10k: add rx_queue_setup/release function Chen Jing D(Mark)
2015-01-30 5:07 ` [dpdk-dev] [PATCH 08/18] fm10k: add tx_queue_setup/release function Chen Jing D(Mark)
2015-01-30 5:07 ` [dpdk-dev] [PATCH 09/18] fm10k: add RX/TX single queue start/stop function Chen Jing D(Mark)
2015-01-30 5:07 ` [dpdk-dev] [PATCH 10/18] fm10k: add dev start/stop functions Chen Jing D(Mark)
2015-02-04 2:36 ` Qiu, Michael
2015-02-04 9:55 ` Chen, Jing D
2015-01-30 5:07 ` [dpdk-dev] [PATCH 11/18] fm10k: add receive and tranmit function Chen Jing D(Mark)
2015-01-30 5:07 ` [dpdk-dev] [PATCH 12/18] fm10k: add PF RSS support Chen Jing D(Mark)
2015-02-01 0:38 ` Neil Horman
2015-01-30 5:07 ` [dpdk-dev] [PATCH 13/18] fm10k: Add scatter receive function Chen Jing D(Mark)
2015-01-30 5:07 ` [dpdk-dev] [PATCH 14/18] fm10k: add function to set vlan Chen Jing D(Mark)
2015-01-30 5:07 ` [dpdk-dev] [PATCH 15/18] fm10k: Add SRIOV-VF support Chen Jing D(Mark)
2015-01-30 5:07 ` [dpdk-dev] [PATCH 16/18] fm10k: add PF and VF interrupt handling function Chen Jing D(Mark)
2015-02-01 0:42 ` Neil Horman
2015-02-02 7:59 ` Chen, Jing D
2015-01-30 5:07 ` [dpdk-dev] [PATCH 17/18] Change lib/Makefile to add fm10k driver into compile list Chen Jing D(Mark)
2015-01-30 5:07 ` [dpdk-dev] [PATCH 18/18] Change mk/rte.app.mk to add fm10k lib into link Chen Jing D(Mark)
2015-02-01 0:50 ` Neil Horman
2015-02-02 8:10 ` Chen, Jing D
2015-01-30 21:26 ` [dpdk-dev] [PATCH 00/18] lib/librte_pmd_fm10k : fm10k pmd driver Neil Horman
2015-01-30 21:46 ` Jeff Shaw
2015-01-30 22:19 ` Thomas Monjalon
2015-02-02 2:59 ` Chen, Jing D
2015-02-02 8:19 ` Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CALwxeUuzS5ns7buzXp2phvMZJ4Nckkf32GQWJ6oPcu=kzZDU5A@mail.gmail.com' \
--to=david.marchand@6wind.com \
--cc=dev@dpdk.org \
--cc=jing.d.chen@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).