From: Tonghao Zhang <xiangxia.m.yue@gmail.com>
To: "Zhang, Qi Z" <qi.z.zhang@intel.com>
Cc: "dev@dpdk.org" <dev@dpdk.org>,
"Zhang, Helin" <helin.zhang@intel.com>,
"Yigit, Ferruh" <ferruh.yigit@intel.com>
Subject: Re: [dpdk-dev] [PATCH v3 1/5] net/ixgbevf: set the inter-interrupt interval for EITR.
Date: Thu, 26 Apr 2018 21:54:07 +0800 [thread overview]
Message-ID: <CAMDZJNWqSHNgKQROk4w=O5STAk5HgwkVcSLuyhsxPYeLnC3SFA@mail.gmail.com> (raw)
In-Reply-To: <039ED4275CED7440929022BC67E70611531A8EBD@SHSMSX103.ccr.corp.intel.com>
On Thu, Apr 26, 2018 at 9:14 PM, Zhang, Qi Z <qi.z.zhang@intel.com> wrote:
> Hi Tonghao:
> Would you submit v4 with Ferruh' s fix and also do a rebase on next-net?
Yes
> Thanks
> Qi
>
>> -----Original Message-----
>> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Ferruh Yigit
>> Sent: Thursday, April 19, 2018 12:10 AM
>> To: Tonghao Zhang <xiangxia.m.yue@gmail.com>
>> Cc: Lu, Wenzhuo <wenzhuo.lu@intel.com>; Ananyev, Konstantin
>> <konstantin.ananyev@intel.com>; Xing, Beilei <beilei.xing@intel.com>; Dai,
>> Wei <wei.dai@intel.com>; dev@dpdk.org
>> Subject: Re: [dpdk-dev] [PATCH v3 1/5] net/ixgbevf: set the inter-interrupt
>> interval for EITR.
>>
>> On 4/18/2018 2:01 AM, Tonghao Zhang wrote:
>> > On Tue, Apr 17, 2018 at 7:00 PM, Ferruh Yigit <ferruh.yigit@intel.com>
>> wrote:
>> >> On 3/22/2018 1:01 PM, xiangxia.m.yue@gmail.com wrote:
>> >>> From: Tonghao Zhang <xiangxia.m.yue@gmail.com>
>> >>>
>> >>> Set EITR interval as default. This patch can improve the performance
>> >>> when we enable the rx-intrrupt to process the packets because we
>> >>> hope rx-intrrupt reduce CPU. For example, the 200us value of EITR
>> >>> makes the performance better with the low CPU.
>> >>>
>> >>> Users can configure the value of ITR via DPDK configuration.
>> >>>
>> >>> The default value of ITR is 500us, compatible with RSC of ixgbe PF,
>> >>> and next patch will use the default value.
>> >>>
>> >>> Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
>> >>> ---
>> >>> v1 --> v2:
>> >>> use the configure file, for different user.
>> >>> suggested by Beilei Xing, http://dpdk.org/dev/patchwork/patch/32989
>> >>> ---
>> >>> config/common_base | 2 ++
>> >>> drivers/net/ixgbe/ixgbe_ethdev.c | 7 +++++++
>> >>> drivers/net/ixgbe/ixgbe_ethdev.h | 12 ++++++++++++
>> >>> 3 files changed, 21 insertions(+)
>> >>>
>> >>> diff --git a/config/common_base b/config/common_base index
>> >>> e74febe..2e9fded 100644
>> >>> --- a/config/common_base
>> >>> +++ b/config/common_base
>> >>> @@ -196,6 +196,8 @@ CONFIG_RTE_LIBRTE_IXGBE_DEBUG_DRIVER=n
>> >>> CONFIG_RTE_LIBRTE_IXGBE_PF_DISABLE_STRIP_CRC=n
>> >>> CONFIG_RTE_IXGBE_INC_VECTOR=y
>> >>> CONFIG_RTE_LIBRTE_IXGBE_BYPASS=n
>> >>> +# interval up to 1024 us
>> >>> +CONFIG_RTE_LIBRTE_IXGBE_ITR_INTERVAL=-1
>> >>
>> >> I can understand this is to let user to ability to fine tune this
>> >> value, the down side is when number of these kind of tune parameters
>> >> increased, it become confusing and config options because less useful or
>> perhaps useless.
>> >>
>> >> And overall we are trying to reduce config options we have.
>> >>
>> >> I can see there is already some default values in the header file,
>> >> what do you think removing the config option and go with default values
>> defined in header?
>> > v2 used the default value in header, but for configuring it like as
>> > i40e option (CONFIG_RTE_LIBRTE_IXGBE_ITR_INTERVAL).
>> > so v3 makes some changes. These patches may have been applied. For
>> > reducing config option, should we do it in individual patches to fix
>> > the ixgbe/i40e option ?
>>
>> Patches are still in Helin's tree, so this up to him how manage.
>> Since patches are not in main repo yet I would suggest making new version if
>> fits to Helin.
>>
>> >
>> >>>
>> >>> #
>> >>> # Compile burst-oriented I40E PMD driver diff --git
>> >>> a/drivers/net/ixgbe/ixgbe_ethdev.c
>> >>> b/drivers/net/ixgbe/ixgbe_ethdev.c
>> >>> index e67389f..495e72c 100644
>> >>> --- a/drivers/net/ixgbe/ixgbe_ethdev.c
>> >>> +++ b/drivers/net/ixgbe/ixgbe_ethdev.c
>> >>> @@ -5780,6 +5780,13 @@ static void ixgbevf_set_vfta_all(struct
>> rte_eth_dev *dev, bool on)
>> >>> if (vector_idx < base + intr_handle->nb_efd - 1)
>> >>> vector_idx++;
>> >>> }
>> >>> +
>> >>> + /* As RX queue setting above show, all queues use the vector 0.
>> >>> + * Set only the ITR value of IXGBE_MISC_VEC_ID.
>> >>> + */
>> >>> + IXGBE_WRITE_REG(hw, IXGBE_VTEITR(IXGBE_MISC_VEC_ID),
>> >>> +
>> ixgbe_calc_itr_interval(RTE_LIBRTE_IXGBE_ITR_INTERVAL)
>> >>> + | IXGBE_EITR_CNT_WDIS);
>> >>> }
>> >>>
>> >>> /**
>> >>> diff --git a/drivers/net/ixgbe/ixgbe_ethdev.h
>> >>> b/drivers/net/ixgbe/ixgbe_ethdev.h
>> >>> index 1db29bd..c779001 100644
>> >>> --- a/drivers/net/ixgbe/ixgbe_ethdev.h
>> >>> +++ b/drivers/net/ixgbe/ixgbe_ethdev.h
>> >>> @@ -58,6 +58,18 @@
>> >>> IXGBE_EITR_ITR_INT_MASK)
>> >>>
>> >>>
>> >>> +#define IXGBE_QUEUE_ITR_INTERVAL_MAX 1024 /* 1024us */
>> >>> +#define IXGBE_QUEUE_ITR_INTERVAL_DEFAULT 500 /* 500us */
>> >>> +
>> >>> +static inline uint16_t
>> >>> +ixgbe_calc_itr_interval(int16_t interval) {
>> >>> + if (interval < 0 || interval > IXGBE_QUEUE_ITR_INTERVAL_MAX)
>> >>> + interval = IXGBE_QUEUE_ITR_INTERVAL_DEFAULT;
>> >>> +
>> >>> + return IXGBE_EITR_INTERVAL_US(interval); }
>> >>> +
>> >>> /* Loopback operation modes */
>> >>> /* 82599 specific loopback operation types */
>> >>> #define IXGBE_LPBK_82599_NONE 0x0 /* Default value. Loopback
>> is disabled. */
>> >>>
>> >>
>
next prev parent reply other threads:[~2018-04-26 13:54 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-22 13:01 [dpdk-dev] [PATCH v3 0/5] ixgbe: fix bugs or just improve xiangxia.m.yue
2018-03-22 13:01 ` [dpdk-dev] [PATCH v3 1/5] net/ixgbevf: set the inter-interrupt interval for EITR xiangxia.m.yue
2018-04-17 11:00 ` Ferruh Yigit
2018-04-18 1:01 ` Tonghao Zhang
2018-04-18 16:10 ` Ferruh Yigit
2018-04-26 13:14 ` Zhang, Qi Z
2018-04-26 13:54 ` Tonghao Zhang [this message]
2018-03-22 13:01 ` [dpdk-dev] [PATCH v3 2/5] net/ixgbe: set the ITR via configuration xiangxia.m.yue
2018-03-22 13:01 ` [dpdk-dev] [PATCH v3 3/5] net/ixgbe: write disable to ITR counter xiangxia.m.yue
2018-03-22 13:01 ` [dpdk-dev] [PATCH v3 4/5] net/ixgbevf: save IXGBE_VTEIMS to intr->mask for performance xiangxia.m.yue
2018-03-22 13:01 ` [dpdk-dev] [PATCH v3 5/5] net/ixgbe: remove the unnecessary call rte_intr_enable xiangxia.m.yue
-- strict thread matches above, loose matches on Subject: below --
2018-02-05 0:51 [dpdk-dev] [PATCH v3 0/5] ixgbe: fix bugs or just improve xiangxia.m.yue
2018-02-05 0:51 ` [dpdk-dev] [PATCH v3 1/5] net/ixgbevf: set the inter-interrupt interval for EITR xiangxia.m.yue
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAMDZJNWqSHNgKQROk4w=O5STAk5HgwkVcSLuyhsxPYeLnC3SFA@mail.gmail.com' \
--to=xiangxia.m.yue@gmail.com \
--cc=dev@dpdk.org \
--cc=ferruh.yigit@intel.com \
--cc=helin.zhang@intel.com \
--cc=qi.z.zhang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).