From: "Juraj Linkeš" <juraj.linkes@pantheon.tech>
To: Jeremy Spewock <jspewock@iol.unh.edu>
Cc: Honnappa.Nagarahalli@arm.com, thomas@monjalon.net,
wathsala.vithanage@arm.com, probb@iol.unh.edu,
paul.szczepanek@arm.com, yoan.picchi@foss.arm.com,
ferruh.yigit@amd.com, andrew.rybchenko@oktetlabs.ru,
dev@dpdk.org
Subject: Re: [PATCH v4 1/7] dts: add required methods to testpmd_shell
Date: Wed, 3 Jan 2024 12:10:52 +0100 [thread overview]
Message-ID: <CAOb5WZYoRzHv2YY--rqK7L3jX8557Y6=NV1SUv6NnyJceMzvQg@mail.gmail.com> (raw)
In-Reply-To: <CAAA20USrz4CkWt7okBg776SFr+kUBQwEB9XrXoPUSc499QyzCw@mail.gmail.com>
On Thu, Dec 21, 2023 at 8:38 PM Jeremy Spewock <jspewock@iol.unh.edu> wrote:
>
>
>
> On Tue, Dec 19, 2023 at 11:45 AM Juraj Linkeš <juraj.linkes@pantheon.tech> wrote:
>>
>> The subject could be improved. That these methods are required is
>> kinda obvious. We should try to actually include some useful
>> information in the subject, such as "add basic methods to testpmd
>> shell", but even that is not saying much. Maybe "add startup
>> verification and forwarding to testpmd shell" - I actually like
>> something like this.
>
>
> The subject on this commit was something that I was having trouble with for quite some time, I was trying to think of something that would be descriptive enough and not too long so I opted to go for the more vague subject and explain it in the body, but I like this subject much better and will change to using that in the next version.
>
>>
>> On Mon, Dec 18, 2023 at 7:13 PM <jspewock@iol.unh.edu> wrote:
>> >
>> > From: Jeremy Spewock <jspewock@iol.unh.edu>
>> >
>> > Added a method within the testpmd interactive shell that polls the
>> > status of ports and verifies that the link status on a given port is
>> > "up." Polling will continue until either the link comes up, or the
>> > timeout is reached. Also added methods for starting and stopping packet
>> > forwarding in testpmd and a method for setting the forwarding mode on
>> > testpmd. The method for starting packet forwarding will also attempt to
>> > verify that forwarding did indeed start by default.
>> >
>>
>> The body should not explain what we're adding, but why we're adding it.
>
>
> Very good point and I'll keep this in mind in the future.
>
>>
>> >
>> > + def start(self, verify: bool = True) -> None:
>> > + """Start packet forwarding with the current configuration.
>> > +
>> > + Args:
>> > + verify: If :data:`True` , a second start command will be sent in an attempt to verify
>> > + packet forwarding started as expected.
>> > +
>>
>> Isn't there a better way to verify this? Like with some show command?
>> Or is this how it's supposed to be used?
>
>
> I looked through documentation and the outputs of many of the show commands and I wasn't able to find one that indicated that forwarding had actually started. Clearly testpmd holds this state somewhere but I couldn't find where. I agree that this method of verification doesn't seem perfect but I wasn't able to find a more automated method of doing so since the start command has no output otherwise.
>
> One place that does seem to display if forwarding has started is using the command: `show port (port_id) rxq|txq (queue_id) desc (desc_id) status` (specifically the rxq variant) but this seems to take a few seconds to update its state between available and done when you stop forwarding so it seems like it could lead to inaccurate verification. This would also make assumptions on the number of rx and tx queues which I'm unsure if we would want to make.
>
Yea, let's not assume anything if we can avoid it. I guess there
doesn't really have to be a dedicated command for verification since
doing it this way is kinda doing the same thing, except maybe this
could put the testpmd application into a faulty state if we try to
start forwarding a second time if it hasn't already been started by
the first execution. I imagine this is not a risk since it's the way
it was done in the original DTS.
>>
>>
>> > + Raises:
>> > + InteractiveCommandExecutionError: If `verify` is :data:`True` and forwarding fails to
>> > + start.
>> > + """
>> > + self.send_command("start")
>> > + if verify:
>> > + # If forwarding was already started, sending "start" again should tell us
>> > + if "Packet forwarding already started" not in self.send_command("start"):
>> > + raise InteractiveCommandExecutionError("Testpmd failed to start packet forwarding.")
>> > +
>> > + def stop(self) -> None:
>> > + """Stop packet forwarding."""
>> > + self.send_command("stop")
>> > +
>>
>> Do we want to do verification here as well? Is there a reason to do
>> such verification?
>
>
> I figured there wasn't much of a reason as your two options when you run this command are you aren't already forwarding in which case this command still gets you into the state you want to be in, or you are forwarding and it stops you which also puts you into the correct state.
>
> I guess that assumes that there can't be an error when trying to stop forwarding,
Yes, that would be the reason to do the verification.
> so I could add a verification step for that purpose, but I don't think it would commonly be the case that stopping fails. There isn't really harm in verifying this for safety though, so I'll add it.
>
Yes, let's add it if we're not absolutely sure we don't need it. The
worst case scenario is it would help with debugging if the
verification fails.
>>
>>
>> > def get_devices(self) -> list[TestPmdDevice]:
>> > """Get a list of device names that are known to testpmd
>> >
>> > @@ -43,3 +101,37 @@ def get_devices(self) -> list[TestPmdDevice]:
>> > if "device name:" in line.lower():
>> > dev_list.append(TestPmdDevice(line))
>> > return dev_list
>> > +
>> > + def wait_link_status_up(self, port_id: int, timeout=SETTINGS.timeout) -> bool:
>> > + """Wait until the link status on the given port is "up".
>> > +
>> > + Arguments:
>> > + port_id: Port to check the link status on.
>> > + timeout: Time to wait for the link to come up. The default value for this
>> > + argument is set using the :option:`-t, --timeout` command-line argument
>> > + or the :envvar:`DTS_TIMEOUT` environment variable.
>> > +
>> > + Returns:
>> > + If the link came up in time or not.
>>
>> This is a bit of a pet peeve of mine - Whether the link came up.
>
>
> Definitely would sound better that way, I'll make the change.
>
>>
>>
>> > + """
>> > + time_to_stop = time.time() + timeout
>> > + while time.time() < time_to_stop:
>> > + port_info = self.send_command(f"show port info {port_id}")
>> > + if "Link status: up" in port_info:
>> > + break
>> > + time.sleep(0.5)
>>
>> How long does it usually take? If it's in the order of seconds, then
>> 0.5 seems fine, if it's faster, the sleep should probably be shorter.
>
>
> Generally this is something that I've actually seen be up instantly when you open an interactive terminal in testpmd, so another option could be to just make this a single verification check. The reason it was left this way right now was just under the assumption that if a link was down for some reason it might be able to recover within the timeout, but whether that takes seconds or not would depend on why the link was down.
>
Ok, let's leave this as is then.
>>
>>
>> > + else:
>> > + self._logger.error(f"The link for port {port_id} did not come up in the given timeout.")
>> > + return "Link status: up" in port_info
>> > +
>> > + def set_forward_mode(self, mode: TestPmdForwardingModes):
>> > + """Set packet forwarding mode.
>> > +
>> > + Args:
>> > + mode: The forwarding mode to use.
>> > + """
>> > + self.send_command(f"set fwd {mode.value}")
>> > +
>>
>> Again the verification - does it make sense to verify this as well?
>
>
> That's a good point and is something easy to verify, I'll add this as well.
>
>>
>>
>> > + def close(self) -> None:
>> > + self.send_command("exit", "")
>> > + return super().close()
>> > --
>> > 2.43.0
>> >
next prev parent reply other threads:[~2024-01-03 11:11 UTC|newest]
Thread overview: 85+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-12-18 18:12 [PATCH v4 0/7] dts: Port scatter suite over jspewock
2023-12-18 18:12 ` [PATCH v4 1/7] dts: add required methods to testpmd_shell jspewock
2023-12-19 16:45 ` Juraj Linkeš
2023-12-21 19:37 ` Jeremy Spewock
2024-01-03 11:10 ` Juraj Linkeš [this message]
2023-12-18 18:12 ` [PATCH v4 2/7] dts: allow passing parameters into interactive apps jspewock
2023-12-19 16:50 ` Juraj Linkeš
2023-12-18 18:12 ` [PATCH v4 3/7] dts: add optional packet filtering to scapy sniffer jspewock
2023-12-19 16:54 ` Juraj Linkeš
2023-12-18 18:12 ` [PATCH v4 4/7] dts: add pci addresses to EAL parameters jspewock
2023-12-19 16:55 ` Juraj Linkeš
2023-12-18 18:12 ` [PATCH v4 5/7] dts: allow configuring MTU of ports jspewock
2023-12-19 16:58 ` Juraj Linkeš
2023-12-18 18:12 ` [PATCH v4 6/7] dts: add scatter to the yaml schema jspewock
2023-12-19 16:59 ` Juraj Linkeš
2023-12-18 18:12 ` [PATCH v4 7/7] dts: add scatter test suite jspewock
2023-12-19 17:29 ` Juraj Linkeš
2023-12-21 21:47 ` Jeremy Spewock
2024-01-03 11:14 ` Juraj Linkeš
2024-01-03 22:12 ` [PATCH v5 0/7] dts: Port scatter suite over jspewock
2024-01-03 22:12 ` [PATCH v5 1/7] dts: add startup verification and forwarding modes to testpmd shell jspewock
2024-01-03 22:12 ` [PATCH v5 2/7] dts: limit EAL parameters to DPDK apps and add parameters to all apps jspewock
2024-01-03 22:12 ` [PATCH v5 3/7] dts: add optional packet filtering to scapy sniffer jspewock
2024-01-03 22:12 ` [PATCH v5 4/7] dts: add pci addresses to EAL parameters jspewock
2024-01-03 22:12 ` [PATCH v5 5/7] dts: allow configuring MTU of ports jspewock
2024-01-03 22:12 ` [PATCH v5 6/7] dts: add scatter to the yaml schema jspewock
2024-01-03 22:12 ` [PATCH v5 7/7] dts: add pmd_buffer_scatter test suite jspewock
2024-01-03 22:31 ` [PATCH v6 0/7] dts: Port scatter suite over jspewock
2024-01-03 22:32 ` [PATCH v6 1/7] dts: add startup verification and forwarding modes to testpmd shell jspewock
2024-01-08 11:34 ` Juraj Linkeš
2024-01-08 16:36 ` Jeremy Spewock
2024-01-09 11:54 ` Juraj Linkeš
2024-01-09 14:31 ` Jeremy Spewock
2024-01-03 22:32 ` [PATCH v6 2/7] dts: limit EAL parameters to DPDK apps and add parameters to all apps jspewock
2024-01-08 11:52 ` Juraj Linkeš
2024-01-08 16:37 ` Jeremy Spewock
2024-01-03 22:32 ` [PATCH v6 3/7] dts: add optional packet filtering to scapy sniffer jspewock
2024-01-08 12:01 ` Juraj Linkeš
2024-01-08 16:39 ` Jeremy Spewock
2024-01-08 16:40 ` Jeremy Spewock
2024-01-03 22:32 ` [PATCH v6 4/7] dts: add pci addresses to EAL parameters jspewock
2024-01-08 14:59 ` Juraj Linkeš
2024-01-03 22:32 ` [PATCH v6 5/7] dts: allow configuring MTU of ports jspewock
2024-01-08 15:00 ` Juraj Linkeš
2024-01-03 22:32 ` [PATCH v6 6/7] dts: add scatter to the yaml schema jspewock
2024-01-08 15:01 ` Juraj Linkeš
2024-01-03 22:32 ` [PATCH v6 7/7] dts: add pmd_buffer_scatter test suite jspewock
2024-01-08 15:47 ` Juraj Linkeš
2024-01-08 16:53 ` Jeremy Spewock
2024-01-09 15:36 ` [PATCH v7 0/7] dts: Port scatter suite over jspewock
2024-01-09 15:36 ` [PATCH v7 1/7] dts: add startup verification and forwarding modes to testpmd shell jspewock
2024-01-10 13:18 ` Juraj Linkeš
2024-01-10 14:09 ` Jeremy Spewock
2024-01-09 15:36 ` [PATCH v7 2/7] dts: limit EAL parameters to DPDK apps and add parameters to all apps jspewock
2024-01-09 15:36 ` [PATCH v7 3/7] dts: add optional packet filtering to scapy sniffer jspewock
2024-01-09 15:36 ` [PATCH v7 4/7] dts: add pci addresses to EAL parameters jspewock
2024-01-09 15:36 ` [PATCH v7 5/7] dts: allow configuring MTU of ports jspewock
2024-01-09 15:36 ` [PATCH v7 6/7] dts: add scatter to the yaml schema jspewock
2024-01-09 15:36 ` [PATCH v7 7/7] dts: add pmd_buffer_scatter test suite jspewock
2024-01-10 13:16 ` Juraj Linkeš
2024-01-10 14:09 ` Jeremy Spewock
2024-01-10 13:22 ` [PATCH v7 0/7] dts: Port scatter suite over Juraj Linkeš
2024-01-10 14:42 ` [PATCH v8 " jspewock
2024-01-10 14:42 ` [PATCH v8 1/7] dts: add startup verification and forwarding modes to testpmd shell jspewock
2024-01-10 14:42 ` [PATCH v8 2/7] dts: limit EAL parameters to DPDK apps and add parameters to all apps jspewock
2024-01-10 14:42 ` [PATCH v8 3/7] dts: add optional packet filtering to scapy sniffer jspewock
2024-01-10 14:42 ` [PATCH v8 4/7] dts: add pci addresses to EAL parameters jspewock
2024-01-10 14:42 ` [PATCH v8 5/7] dts: allow configuring MTU of ports jspewock
2024-01-10 14:42 ` [PATCH v8 6/7] dts: add scatter to the yaml schema jspewock
2024-01-10 14:42 ` [PATCH v8 7/7] dts: add pmd_buffer_scatter test suite jspewock
2024-01-11 10:07 ` [PATCH v8 0/7] dts: Port scatter suite over Juraj Linkeš
2024-02-21 3:34 ` Patrick Robb
2024-03-07 15:00 ` Thomas Monjalon
2024-03-11 14:15 ` Jeremy Spewock
2024-03-11 15:43 ` [PATCH v9 " jspewock
2024-03-11 15:43 ` [PATCH v9 1/7] dts: add startup verification and forwarding modes to testpmd shell jspewock
2024-03-11 15:44 ` [PATCH v9 2/7] dts: limit EAL parameters to DPDK apps and add parameters to all apps jspewock
2024-03-11 15:44 ` [PATCH v9 3/7] dts: add optional packet filtering to scapy sniffer jspewock
2024-03-11 15:44 ` [PATCH v9 4/7] dts: add pci addresses to EAL parameters jspewock
2024-03-11 15:44 ` [PATCH v9 5/7] dts: allow configuring MTU of ports jspewock
2024-03-11 15:44 ` [PATCH v9 6/7] dts: add scatter to the yaml schema jspewock
2024-03-11 15:44 ` [PATCH v9 7/7] dts: add pmd_buffer_scatter test suite jspewock
2024-03-15 17:41 ` [PATCH v9 0/7] dts: Port scatter suite over Thomas Monjalon
-- strict thread matches above, loose matches on Subject: below --
2023-11-13 20:28 [PATCH v3 " jspewock
2023-12-14 22:10 ` [PATCH v4 1/7] dts: add required methods to testpmd_shell jspewock
2023-12-18 17:22 ` jspewock
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAOb5WZYoRzHv2YY--rqK7L3jX8557Y6=NV1SUv6NnyJceMzvQg@mail.gmail.com' \
--to=juraj.linkes@pantheon.tech \
--cc=Honnappa.Nagarahalli@arm.com \
--cc=andrew.rybchenko@oktetlabs.ru \
--cc=dev@dpdk.org \
--cc=ferruh.yigit@amd.com \
--cc=jspewock@iol.unh.edu \
--cc=paul.szczepanek@arm.com \
--cc=probb@iol.unh.edu \
--cc=thomas@monjalon.net \
--cc=wathsala.vithanage@arm.com \
--cc=yoan.picchi@foss.arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).