From: James Tervit <James.Tervit@ewitech.co.uk>
To: "dev@dpdk.org" <dev@dpdk.org>
Subject: Ubuntu Upgrade 20.04.6 to 22.04 Jammy 23.06 HomeGateway example
Date: Thu, 18 Jan 2024 05:21:59 +0000 [thread overview]
Message-ID: <CWLP123MB70284ED45DDE9027CCEFBE62DF722@CWLP123MB7028.GBRP123.PROD.OUTLOOK.COM> (raw)
In-Reply-To: <20240117101749.257581-1-qiming.yang@intel.com>
[-- Attachment #1: Type: text/plain, Size: 9387 bytes --]
Dear DPDK Folks,
I am following the latest build of home gateway https://s3-docs.fd.io/vpp/23.06/usecases/home_gateway.html for testing and development.
Running
Linux PXC-SM-002 5.15.0-91-generic #101-Ubuntu
vpp/jammy,now 23.10-release amd64 [installed]
PRETTY_NAME="Ubuntu 22.04.3 LTS"
NAME="Ubuntu"
VERSION_ID="22.04"
VERSION="22.04.3 LTS (Jammy Jellyfish)"
In my vpp startup.conf, which is calling setup.gate and, in turn, runs setup.tmpl I get an error on systemd in bold below.
Jan 18 04:23:34 PXC-SM-002 vpp[224896]: set interface l2 bridge: unknown interface `GigabitEthernetb7/0/0 1'
Jan 18 04:23:34 PXC-SM-002 vpp[224896]: exec: CLI line error: GigabitEthernetb7/0/0 1 (this is related to setup.tmpl section)
Jan 18 04:23:34 PXC-SM-002 vpp[224896]: exec: CLI line error:
setup.gate runs
define HOSTNAME Gate-001
define TRUNK GigabitEthernet65/0/0
comment { Specific MAC address yields a constant IP address }
define TRUNK_MACADDR 3c:ec:ef:da:89:58
define BVI_MACADDR 3c:ce:fe:ad:01:02
comment { inside subnet 192.168.<inside_subnet>.0/24 }
define INSIDE_SUBNET 1
comment { Adjust as needed to match PCI addresses of inside network ports }
define INSIDE_PORT1 GigabitEthernet65/0/1
define INSIDE_PORT2 GigabitEthernet65/0/2
define INSIDE_PORT3 GigabitEthernet65/0/3
define INSIDE_PORT4 GigabitEthernetb7/0/0
define INSIDE_PORT5 GigabitEthernetb7/0/1
define INSIDE_PORT6 GigabitEthernetb7/0/3
comment { feature selections }
define FEATURE_ADL uncomment
define FEATURE_NAT44 uncomment
define FEATURE_CNAT comment
define FEATURE_DNS comment
define FEATURE_IP6 comment
define FEATURE_IKE_RESPONDER comment
define FEATURE_MACTIME uncomment
define FEATURE_OVPN uncomment
define FEATURE_MODEM_ROUTE uncomment
exec /home/pxcghost/VPP/pxc-gate/setup.tmpl
The setup.tmpl tries to create inside ports and, for some reason, fails on one port and stops processing.
show macro
set int mac address $(TRUNK) $(TRUNK_MACADDR)
set dhcp client intfc $(TRUNK) hostname $(HOSTNAME)
set int state $(TRUNK) up
bvi create instance 0
set int mac address bvi0 $(BVI_MACADDR)
set int l2 bridge bvi0 1 bvi
set int ip address bvi0 192.168.$(INSIDE_SUBNET).1/24
set int state bvi0 up
set int l2 bridge $(INSIDE_PORT1) 1
set int state $(INSIDE_PORT1) up
set int l2 bridge $(INSIDE_PORT2) 1
set int state $(INSIDE_PORT2) up
set int l2 bridge $(INSIDE_PORT3) 1
set int state $(INSIDE_PORT3) up
set int l2 bridge $(INSIDE_PORT4) 1
set int state $(INSIDE_PORT4) up
set int l2 bridge $(INSIDE_PORT5) 1
set int state $(INSIDE_PORT5) up
set int l2 bridge $(INSIDE_PORT6) 1
set int state $(INSIDE_PORT6) up
comment { dhcp server and host-stack access }
create tap host-if-name lstack host-ip4-addr 192.168.$(INSIDE_SUBNET).2/24 host-ip4-gw 192.168.$(INSIDE_SUBNET).1
set int l2 bridge tap0 1
set int state tap0 up
service restart isc-dhcp-server
$(FEATURE_ADL) { bin adl_interface_enable_disable $(TRUNK) }
$(FEATURE_ADL) { ip table 1 }
$(FEATURE_ADL) { ip route add table 1 0.0.0.0/0 via local }
$(FEATURE_NAT44) { nat44 forwarding enable }
$(FEATURE_NAT44) { nat44 plugin enable sessions 63000 }
$(FEATURE_NAT44) { nat44 add interface address $(TRUNK) }
$(FEATURE_NAT44) { set interface nat44 in bvi0 out $(TRUNK) }
comment { iPhones seem to need lots of RA messages... }
$(FEATURE_IP6) { ip6 nd bvi0 ra-managed-config-flag ra-other-config-flag ra-interval 30 20 ra-lifetime 180 }
comment { ip6 nd bvi0 prefix 0::0/0 ra-lifetime 100000 }
comment { if using the mactime plugin, configure it }
$(FEATURE_MACTIME) { bin mactime_add_del_range name roku mac 3c:ec:ef:da:89:58 allow-static }
$(FEATURE_MACTIME) { bin mactime_enable_disable $(INSIDE_PORT1) }
$(FEATURE_MACTIME) { bin mactime_enable_disable $(INSIDE_PORT2) }
$(FEATURE_MACTIME) { bin mactime_enable_disable $(INSIDE_PORT3) }
$(FEATURE_MACTIME) { bin mactime_enable_disable $(INSIDE_PORT4) }
$(FEATURE_MODEM_ROUTE) { ip route add 192.168.1.1/23 via $(TRUNK) }
for some reason, port4 fails as per the system, and I think it fails on the DHCP part of the script; any pointers are appreciated. I can bind ports and unbind back to kernel with no problem, and I can see the interfaces inside vpp and bvi look ok.
sudo vppctl show interface, ip addresses not assigned as I think that’s because the script doesn’t process the lstack and dhcp portion due to crashing.
Name Idx State MTU (L3/IP4/IP6/MPLS) Counter Count
GigabitEthernet65/0/0 1 up 9000/0/0/0 rx packets 585
rx bytes 72405
tx packets 3
tx bytes 1002
drops 585
ip4 228
ip6 26
GigabitEthernet65/0/1 2 up 9000/0/0/0
GigabitEthernet65/0/2 3 up 9000/0/0/0
GigabitEthernet65/0/3 4 up 9000/0/0/0
TenGigabitEthernetb7/0/0 5 down 9000/0/0/0
TenGigabitEthernetb7/0/1 6 down 9000/0/0/0
TenGigabitEthernetb7/0/3 7 down 9000/0/0/0
bvi0 8 up 9000/0/0/0
local0 0 down 0/0/0/0
Network devices using DPDK-compatible driver
============================================
0000:65:00.0 'I350 Gigabit Network Connection 1521' drv=vfio-pci unused=igb,igb_uio,uio_pci_generic
0000:65:00.1 'I350 Gigabit Network Connection 1521' drv=igb_uio unused=igb,vfio-pci,uio_pci_generic
0000:65:00.2 'I350 Gigabit Network Connection 1521' drv=igb_uio unused=igb,vfio-pci,uio_pci_generic
0000:65:00.3 'I350 Gigabit Network Connection 1521' drv=igb_uio unused=igb,vfio-pci,uio_pci_generic
0000:b7:00.0 'Ethernet Connection X722 for 10GBASE-T 37d2' drv=igb_uio unused=i40e,vfio-pci,uio_pci_generic
0000:b7:00.1 'Ethernet Connection X722 for 10GBASE-T 37d2' drv=igb_uio unused=i40e,vfio-pci,uio_pci_generic
0000:b7:00.3 'Ethernet Connection X722 for 10GbE SFP+ 37d0' drv=igb_uio unused=i40e,vfio-pci,uio_pci_generic
Network devices using kernel driver
===================================
0000:b7:00.2 'Ethernet Connection X722 for 10GbE SFP+ 37d0' if=eno7 drv=i40e unused=igb_uio,vfio-pci,uio_pci_generic *Active*
No 'Baseband' devices detected
==============================
Crypto devices using kernel driver
==================================
0000:b5:00.0 'C62x Chipset QuickAssist Technology 37c8' drv=c6xx unused=qat_c62x,igb_uio,vfio-pci,uio_pci_generic
0000:b6:00.0 'C62x Chipset QuickAssist Technology 37c8' drv=c6xx unused=qat_c62x,igb_uio,vfio-pci,uio_pci_generic
DMA devices using kernel driver
===============================
0000:00:04.0 'Sky Lake-E CBDMA Registers 2021' drv=ioatdma unused=igb_uio,vfio-pci,uio_pci_generic
0000:00:04.1 'Sky Lake-E CBDMA Registers 2021' drv=ioatdma unused=igb_uio,vfio-pci,uio_pci_generic
0000:00:04.2 'Sky Lake-E CBDMA Registers 2021' drv=ioatdma unused=igb_uio,vfio-pci,uio_pci_generic
0000:00:04.3 'Sky Lake-E CBDMA Registers 2021' drv=ioatdma unused=igb_uio,vfio-pci,uio_pci_generic
0000:00:04.4 'Sky Lake-E CBDMA Registers 2021' drv=ioatdma unused=igb_uio,vfio-pci,uio_pci_generic
0000:00:04.5 'Sky Lake-E CBDMA Registers 2021' drv=ioatdma unused=igb_uio,vfio-pci,uio_pci_generic
0000:00:04.6 'Sky Lake-E CBDMA Registers 2021' drv=ioatdma unused=igb_uio,vfio-pci,uio_pci_generic
0000:00:04.7 'Sky Lake-E CBDMA Registers 2021' drv=ioatdma unused=igb_uio,vfio-pci,uio_pci_generic
No 'Eventdev' devices detected
==============================
No 'Mempool' devices detected
=============================
No 'Compress' devices detected
==============================
No 'Misc (rawdev)' devices detected
===================================
No 'Regex' devices detected
Bus info Device Class Description
=======================================================
pci@0000:65:00.0<mailto:pci@0000:65:00.0> network I350 Gigabit Network Connection
pci@0000:65:00.1<mailto:pci@0000:65:00.1> network I350 Gigabit Network Connection
pci@0000:65:00.2<mailto:pci@0000:65:00.2> network I350 Gigabit Network Connection
pci@0000:65:00.3<mailto:pci@0000:65:00.3> network I350 Gigabit Network Connection
pci@0000:b7:00.0<mailto:pci@0000:b7:00.0> network Ethernet Connection X722 for 10GBASE-T
pci@0000:b7:00.1<mailto:pci@0000:b7:00.1> network Ethernet Connection X722 for 10GBASE-T
pci@0000:b7:00.2<mailto:pci@0000:b7:00.2> eno7 network Ethernet Connection X722 for 10GbE SFP+
pci@0000:b7:00.3<mailto:pci@0000:b7:00.3> network Ethernet Connection X722 for 10GbE SFP+
eno7 is reserved to allow me remote access on kernel.
Any pointers greatly appreciated
[-- Attachment #2: Type: text/html, Size: 30731 bytes --]
next prev parent reply other threads:[~2024-01-18 5:22 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-01-17 10:17 [PATCH] maintainers: updated for Intel drivers qiming.yang
2024-01-18 5:21 ` James Tervit [this message]
2024-01-18 15:06 ` Ubuntu Upgrade 20.04.6 to 22.04 Jammy 23.06 HomeGateway example James Tervit
2024-01-29 16:49 ` [PATCH] maintainers: updated for Intel drivers Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CWLP123MB70284ED45DDE9027CCEFBE62DF722@CWLP123MB7028.GBRP123.PROD.OUTLOOK.COM \
--to=james.tervit@ewitech.co.uk \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).