From: "Verma, Shally" <Shally.Verma@cavium.com>
To: "De Lara Guarch, Pablo" <pablo.de.lara.guarch@intel.com>
Cc: "Trahe, Fiona" <fiona.trahe@intel.com>,
"dev@dpdk.org" <dev@dpdk.org>,
"Athreya, Narayana Prasad" <NarayanaPrasad.Athreya@cavium.com>,
"Challa, Mahipal" <Mahipal.Challa@cavium.com>,
"Gupta, Ashish" <Ashish.Gupta@cavium.com>,
"Sahu, Sunila" <Sunila.Sahu@cavium.com>
Subject: Re: [dpdk-dev] [PATCH v1 7/7] drivers/compress: add meson.build support
Date: Wed, 20 Jun 2018 07:36:21 +0000 [thread overview]
Message-ID: <CY4PR0701MB3634535B1A49A186F27B9191F0770@CY4PR0701MB3634.namprd07.prod.outlook.com> (raw)
In-Reply-To: <E115CCD9D858EF4F90C690B0DCB4D8977F8D86FC@IRSMSX108.ger.corp.intel.com>
>-----Original Message-----
>From: De Lara Guarch, Pablo [mailto:pablo.de.lara.guarch@intel.com]
>Sent: 20 June 2018 12:56
>To: Verma, Shally <Shally.Verma@cavium.com>
>Cc: Trahe, Fiona <fiona.trahe@intel.com>; dev@dpdk.org; Athreya, Narayana Prasad <NarayanaPrasad.Athreya@cavium.com>;
>Challa, Mahipal <Mahipal.Challa@cavium.com>; Gupta, Ashish <Ashish.Gupta@cavium.com>; Sahu, Sunila
><Sunila.Sahu@cavium.com>
>Subject: RE: [PATCH v1 7/7] drivers/compress: add meson.build support
>
>External Email
>
>Hi Shally,
>
>> -----Original Message-----
>> From: Verma, Shally [mailto:Shally.Verma@cavium.com]
>> Sent: Wednesday, June 20, 2018 7:02 AM
>> To: De Lara Guarch, Pablo <pablo.de.lara.guarch@intel.com>
>> Cc: Trahe, Fiona <fiona.trahe@intel.com>; dev@dpdk.org; Athreya, Narayana
>> Prasad <NarayanaPrasad.Athreya@cavium.com>; Challa, Mahipal
>> <Mahipal.Challa@cavium.com>; Gupta, Ashish <Ashish.Gupta@cavium.com>;
>> Sahu, Sunila <Sunila.Sahu@cavium.com>
>> Subject: RE: [PATCH v1 7/7] drivers/compress: add meson.build support
>>
>>
>>
// snip
>> >> Also change the config and drv format flags to append _compress to
>> >> use compression specific format for global filenames. This also
>> >> require change in compression PMDs to rename their version.map files
>> >> as rte_pmd_<pmd
>> >> name>_compress.map ex. Isal should rename as
>> >> rte_pmd_isal_compress_version.map.
>> >>
>> >> Currently the drivers/compress/meson.build use the generic config
>> >> names with no compress specific specifier. This breaks meson build
>> >> when vendor uses same name for different PMDs, where all belongs to same
>> platform.
>> >> Ex. drivers/net/octeontx, drivers/event/octeontx,
>> >> drivers/compress/octeontx where, net, event and compress carry PMD
>> >> for eth, event and compression devices for Octeontx platform. Thus,
>> >> differentiate globally used files using module specific specifier ex.
>> >> rte_pmd_octeontx_compress_version.map
>> >> and rte_pmd_octeontx_event_version.map
>> >
>> >I think instead of forcing all the PMDs to use that suffix, if there
>> >are drivers with the same PMD, they can add the "compres" suffix, without
>> imposing it to others.
>> >
>> [Shally] Meson build force us to use then directory name as octeontx_compress
>> where as we want to keep it as compress/octeontx (on the similar lines of
>> net/octeontx, event/octeontx). Also its already under compress, so having it as
>> compress/octeontx_compress looks unnecessary,
>
>For null crypto, the directory is called crypto/null and it is built with meson (and there is also a net/null).
>Maybe doing something like that will work?
>
>If it doesn't, then you can add this, but make sure that you fix
>the isal export map name in the Makefile too.
>
[Shally] fine. I will check for this and if required, will send patch for ISAL as well.
>Thanks,
>Pablo
>
>>
>> Thanks
>> Shally
prev parent reply other threads:[~2018-06-20 7:36 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-06-05 10:35 [dpdk-dev] [PATCH v1 0/7] compress: add Octeontx ZIP compression PMD Shally Verma
2018-06-05 10:35 ` [dpdk-dev] [PATCH v1 1/7] compress/octeontx: add octeontx zip PMD support Shally Verma
2018-06-10 10:38 ` Jerin Jacob
2018-06-20 6:32 ` Verma, Shally
2018-06-19 22:15 ` De Lara Guarch, Pablo
2018-06-05 10:35 ` [dpdk-dev] [PATCH v1 2/7] compress/octeontx: add device setup PMD ops Shally Verma
2018-06-19 22:15 ` De Lara Guarch, Pablo
2018-06-20 6:04 ` Verma, Shally
2018-06-05 10:35 ` [dpdk-dev] [PATCH v1 3/7] compress/octeontx: add xform and stream create support Shally Verma
2018-06-19 22:13 ` De Lara Guarch, Pablo
2018-06-20 6:12 ` Verma, Shally
2018-06-05 10:35 ` [dpdk-dev] [PATCH v1 4/7] compress/octeontx: add ops enq deq apis Shally Verma
2018-06-19 22:18 ` De Lara Guarch, Pablo
2018-06-29 7:42 ` Verma, Shally
2018-06-05 10:35 ` [dpdk-dev] [PATCH v1 5/7] test: add octeontx zip PMD for compressdev tests Shally Verma
2018-06-19 22:18 ` De Lara Guarch, Pablo
2018-06-20 6:03 ` Verma, Shally
2018-06-05 10:35 ` [dpdk-dev] [PATCH v1 6/7] doc: add octeontx zip PMD documentation Shally Verma
2018-06-14 11:22 ` Kovacevic, Marko
2018-06-19 22:22 ` De Lara Guarch, Pablo
2018-06-05 10:35 ` [dpdk-dev] [PATCH v1 7/7] drivers/compress: add meson.build support Shally Verma
2018-06-19 22:30 ` De Lara Guarch, Pablo
2018-06-20 6:02 ` Verma, Shally
2018-06-20 7:25 ` De Lara Guarch, Pablo
2018-06-20 7:36 ` Verma, Shally [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CY4PR0701MB3634535B1A49A186F27B9191F0770@CY4PR0701MB3634.namprd07.prod.outlook.com \
--to=shally.verma@cavium.com \
--cc=Ashish.Gupta@cavium.com \
--cc=Mahipal.Challa@cavium.com \
--cc=NarayanaPrasad.Athreya@cavium.com \
--cc=Sunila.Sahu@cavium.com \
--cc=dev@dpdk.org \
--cc=fiona.trahe@intel.com \
--cc=pablo.de.lara.guarch@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).