DPDK patches and discussions
 help / color / mirror / Atom feed
From: "Zhou, Danny" <danny.zhou@intel.com>
To: "Liang, Cunming" <cunming.liang@intel.com>,
	"dev@dpdk.org" <dev@dpdk.org>
Subject: Re: [dpdk-dev] [PATCH v1 5/5] L3fwd-power: enable one-shot rx interrupt	and polling/interrupt mode switch
Date: Thu, 29 Jan 2015 04:07:18 +0000	[thread overview]
Message-ID: <DFDF335405C17848924A094BC35766CF0AA590A6@SHSMSX104.ccr.corp.intel.com> (raw)
In-Reply-To: <D0158A423229094DA7ABF71CF2FA0DA3118ABD7B@shsmsx102.ccr.corp.intel.com>



> -----Original Message-----
> From: Liang, Cunming
> Sent: Thursday, January 29, 2015 2:34 AM
> To: Zhou, Danny; dev@dpdk.org
> Subject: RE: [dpdk-dev] [PATCH v1 5/5] L3fwd-power: enable one-shot rx interrupt and polling/interrupt mode switch
> 
> 
> 
> > -----Original Message-----
> > From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Danny Zhou
> > Sent: Wednesday, January 28, 2015 2:51 AM
> > To: dev@dpdk.org
> > Subject: [dpdk-dev] [PATCH v1 5/5] L3fwd-power: enable one-shot rx interrupt
> > and polling/interrupt mode switch
> >
> > Signed-off-by: Danny Zhou <danny.zhou@intel.com>
> > ---
> >  examples/l3fwd-power/main.c | 170
> > +++++++++++++++++++++++++++++++++-----------
> >  1 file changed, 129 insertions(+), 41 deletions(-)
> >
> > diff --git a/examples/l3fwd-power/main.c b/examples/l3fwd-power/main.c
> > index f6b55b9..e6e4f55 100644
> > --- a/examples/l3fwd-power/main.c
> > +++ b/examples/l3fwd-power/main.c
> > @@ -75,12 +75,13 @@
> >  #include <rte_string_fns.h>
> >  #include <rte_timer.h>
> >  #include <rte_power.h>
> > +#include <rte_eal.h>
> >
> >  #define RTE_LOGTYPE_L3FWD_POWER RTE_LOGTYPE_USER1
> >
> >  #define MAX_PKT_BURST 32
> >
> > -#define MIN_ZERO_POLL_COUNT 5
> > +#define MIN_ZERO_POLL_COUNT 10
> >
> >  /* around 100ms at 2 Ghz */
> >  #define TIMER_RESOLUTION_CYCLES           200000000ULL
> > @@ -188,6 +189,9 @@ struct lcore_rx_queue {
> >  #define MAX_TX_QUEUE_PER_PORT RTE_MAX_ETHPORTS
> >  #define MAX_RX_QUEUE_PER_PORT 128
> >
> > +#define MAX_RX_QUEUE_INTERRUPT_PER_PORT 16
> > +
> > +
> >  #define MAX_LCORE_PARAMS 1024
> >  struct lcore_params {
> >  	uint8_t port_id;
> > @@ -214,7 +218,7 @@ static uint16_t nb_lcore_params =
> > sizeof(lcore_params_array_default) /
> >
> >  static struct rte_eth_conf port_conf = {
> >  	.rxmode = {
> > -		.mq_mode	= ETH_MQ_RX_RSS,
> > +		.mq_mode = ETH_MQ_RX_RSS,
> >  		.max_rx_pkt_len = ETHER_MAX_LEN,
> >  		.split_hdr_size = 0,
> >  		.header_split   = 0, /**< Header Split disabled */
> > @@ -226,11 +230,14 @@ static struct rte_eth_conf port_conf = {
> >  	.rx_adv_conf = {
> >  		.rss_conf = {
> >  			.rss_key = NULL,
> > -			.rss_hf = ETH_RSS_IP,
> > +			.rss_hf = ETH_RSS_UDP,
> >  		},
> >  	},
> >  	.txmode = {
> > -		.mq_mode = ETH_DCB_NONE,
> > +		.mq_mode = ETH_MQ_TX_NONE,
> > +	},
> > +	.intr_conf = {
> > +		.rxq = 1, /**< rxq interrupt feature enabled */
> >  	},
> >  };
> >
> > @@ -402,19 +409,22 @@ power_timer_cb(__attribute__((unused)) struct
> > rte_timer *tim,
> >  	/* accumulate total execution time in us when callback is invoked */
> >  	sleep_time_ratio = (float)(stats[lcore_id].sleep_time) /
> >  					(float)SCALING_PERIOD;
> > -
> >  	/**
> >  	 * check whether need to scale down frequency a step if it sleep a lot.
> >  	 */
> > -	if (sleep_time_ratio >= SCALING_DOWN_TIME_RATIO_THRESHOLD)
> > -		rte_power_freq_down(lcore_id);
> > +	if (sleep_time_ratio >= SCALING_DOWN_TIME_RATIO_THRESHOLD) {
> > +		if (rte_power_freq_down)
> > +			rte_power_freq_down(lcore_id);
> > +	}
> >  	else if ( (unsigned)(stats[lcore_id].nb_rx_processed /
> > -		stats[lcore_id].nb_iteration_looped) < MAX_PKT_BURST)
> > +		stats[lcore_id].nb_iteration_looped) < MAX_PKT_BURST) {
> >  		/**
> >  		 * scale down a step if average packet per iteration less
> >  		 * than expectation.
> >  		 */
> > -		rte_power_freq_down(lcore_id);
> > +		if (rte_power_freq_down)
> > +			rte_power_freq_down(lcore_id);
> > +	}
> >
> >  	/**
> >  	 * initialize another timer according to current frequency to ensure
> > @@ -707,22 +717,20 @@ l3fwd_simple_forward(struct rte_mbuf *m, uint8_t
> > portid,
> >
> >  }
> >
> > -#define SLEEP_GEAR1_THRESHOLD            100
> > -#define SLEEP_GEAR2_THRESHOLD            1000
> > +#define MINIMUM_SLEEP_TIME         1
> > +#define SUSPEND_THRESHOLD          300
> >
> >  static inline uint32_t
> >  power_idle_heuristic(uint32_t zero_rx_packet_count)
> >  {
> > -	/* If zero count is less than 100, use it as the sleep time in us */
> > -	if (zero_rx_packet_count < SLEEP_GEAR1_THRESHOLD)
> > -		return zero_rx_packet_count;
> > -	/* If zero count is less than 1000, sleep time should be 100 us */
> > -	else if ((zero_rx_packet_count >= SLEEP_GEAR1_THRESHOLD) &&
> > -			(zero_rx_packet_count < SLEEP_GEAR2_THRESHOLD))
> > -		return SLEEP_GEAR1_THRESHOLD;
> > -	/* If zero count is greater than 1000, sleep time should be 1000 us */
> > -	else if (zero_rx_packet_count >= SLEEP_GEAR2_THRESHOLD)
> > -		return SLEEP_GEAR2_THRESHOLD;
> > +	/* If zero count is less than 100,  sleep 1us */
> > +	if (zero_rx_packet_count < SUSPEND_THRESHOLD)
> > +		return MINIMUM_SLEEP_TIME;
> > +	/* If zero count is less than 1000, sleep 100 us which is the minimum
> > latency
> > +	    switching from C3/C6 to C0
> > +	*/
> > +	else
> > +		return SUSPEND_THRESHOLD;
> >
> >  	return 0;
> >  }
> > @@ -762,6 +770,35 @@ power_freq_scaleup_heuristic(unsigned lcore_id,
> >  	return FREQ_CURRENT;
> >  }
> >
> > +/**
> > + * force polling thread sleep until one-shot rx interrupt triggers
> > + * @param port_id
> > + *  Port id.
> > + * @param queue_id
> > + *  Rx queue id.
> > + * @return
> > + *  0 on success
> > + */
> > +static int
> > +sleep_until_rx_interrupt(uint8_t port_id, uint8_t queue_id)
> > +{
> > +	/* Enable one-shot rx interrupt */
> > +	rte_eth_dev_rx_queue_intr_enable(port_id, queue_id);
> > +
> > +	RTE_LOG(INFO, L3FWD_POWER,
> > +		"lcore %u sleeps until interrupt on port%d,rxq%d triggers\n",
> > +		rte_lcore_id(), port_id, queue_id);
> > +	rte_eal_wait_rx_intr(port_id, queue_id);
> > +	RTE_LOG(INFO, L3FWD_POWER,
> > +		"lcore %u is waked up from rx interrupt on port%d,rxq%d\n",
> > +		rte_lcore_id(), port_id, queue_id);
> > +
> > +	/* Disable one-shot rx interrupt */
> > +	rte_eth_dev_rx_queue_intr_disable(port_id, queue_id);
> > +
> > +	return 0;
> > +}
> > +
> >  /* main processing loop */
> >  static int
> >  main_loop(__attribute__((unused)) void *dummy)
> > @@ -775,7 +812,6 @@ main_loop(__attribute__((unused)) void *dummy)
> >  	struct lcore_conf *qconf;
> >  	struct lcore_rx_queue *rx_queue;
> >  	enum freq_scale_hint_t lcore_scaleup_hint;
> > -
> >  	uint32_t lcore_rx_idle_count = 0;
> >  	uint32_t lcore_idle_hint = 0;
> >
> > @@ -835,6 +871,8 @@ main_loop(__attribute__((unused)) void *dummy)
> >  			prev_tsc_power = cur_tsc_power;
> >  		}
> >
> > +
> > +start_rx:
> >  		/*
> >  		 * Read packet from RX queues
> >  		 */
> > @@ -848,6 +886,7 @@ main_loop(__attribute__((unused)) void *dummy)
> >
> >  			nb_rx = rte_eth_rx_burst(portid, queueid, pkts_burst,
> >  								MAX_PKT_BURST);
> > +
> >  			stats[lcore_id].nb_rx_processed += nb_rx;
> >  			if (unlikely(nb_rx == 0)) {
> >  				/**
> > @@ -910,10 +949,13 @@ main_loop(__attribute__((unused)) void *dummy)
> >  						rx_queue->freq_up_hint;
> >  			}
> >
> > -			if (lcore_scaleup_hint == FREQ_HIGHEST)
> > -				rte_power_freq_max(lcore_id);
> > -			else if (lcore_scaleup_hint == FREQ_HIGHER)
> > -				rte_power_freq_up(lcore_id);
> > +			if (lcore_scaleup_hint == FREQ_HIGHEST) {
> > +				if (rte_power_freq_max)
> > +					rte_power_freq_max(lcore_id);
> > +			} else if (lcore_scaleup_hint == FREQ_HIGHER) {
> > +				if (rte_power_freq_up)
> > +					rte_power_freq_up(lcore_id);
> > +			}
> >  		} else {
> >  			/**
> >  			 * All Rx queues empty in recent consecutive polls,
> > @@ -928,21 +970,55 @@ main_loop(__attribute__((unused)) void *dummy)
> >  					lcore_idle_hint = rx_queue->idle_hint;
> >  			}
> >
> > -			if ( lcore_idle_hint < SLEEP_GEAR1_THRESHOLD)
> > +			if (lcore_idle_hint < SUSPEND_THRESHOLD)
> >  				/**
> > -				 * execute "pause" instruction to avoid context
> > -				 * switch for short sleep.
> > - 				 */
> > +				* execute "pause" instruction to avoid context
> > +				* switch which generally take hundres of microsecond
> > +				* for short sleep.
> > +				*/
> >  				rte_delay_us(lcore_idle_hint);
> > -			else
> > -				/* long sleep force runing thread to suspend */
> > -				usleep(lcore_idle_hint);
> > -
> > +			else {
> > +				/* suspend untill rx interrupt trigges */
> > +				sleep_until_rx_interrupt(
> > +					qconf->rx_queue_list[0].port_id,
> > +					qconf->rx_queue_list[0].queue_id);
> > +				/* start receiving packets immediately */
> > +				goto start_rx;
> > +			}
> >  			stats[lcore_id].sleep_time += lcore_idle_hint;
> >  		}
> >  	}
> >  }
> >
> > +/**
> > + * It will be called as the callback for specified port after a LSI interrupt
> > + * has been fully handled. This callback needs to be implemented carefully as
> > + * it will be called in the interrupt host thread which is different from the
> > + * application main thread.
> > + *
> > + * @param port_id
> > + *  Port id.
> > + * @param type
> > + *  event type.
> > + * @param param
> > + *  Pointer to(address of) the parameters.
> > + *
> > + * @return
> > + *  void.
> > + */
> > +
> > +/*
> > +static void
> > +rx_interrupt_event_callback(uint8_t port_id, enum rte_eth_event_type type,
> > void *param)
> > +{
> > +	uint64_t rx_queues = *((uint64_t *)param);
> > +
> > +	port_id = port_id + 1;
> > +	if(type == RTE_ETH_EVENT_INTR_RX)
> > +		port_id = rx_queues;
> [LCM] What's bunch of things for ?

Debug related code which will be removed in V2 patch.

> 
> > +}
> > +*/
> > +
> >  static int
> >  check_lcore_params(void)
> >  {
> > @@ -1270,7 +1346,7 @@ setup_hash(int socketid)
> >  	char s[64];
> >
> >  	/* create ipv4 hash */
> > -	snprintf(s, sizeof(s), "ipv4_l3fwd_hash_%d", socketid);
> > +	rte_snprintf(s, sizeof(s), "ipv4_l3fwd_hash_%d", socketid);
> >  	ipv4_l3fwd_hash_params.name = s;
> >  	ipv4_l3fwd_hash_params.socket_id = socketid;
> >  	ipv4_l3fwd_lookup_struct[socketid] =
> > @@ -1280,7 +1356,7 @@ setup_hash(int socketid)
> >  				"socket %d\n", socketid);
> >
> >  	/* create ipv6 hash */
> > -	snprintf(s, sizeof(s), "ipv6_l3fwd_hash_%d", socketid);
> > +	rte_snprintf(s, sizeof(s), "ipv6_l3fwd_hash_%d", socketid);
> >  	ipv6_l3fwd_hash_params.name = s;
> >  	ipv6_l3fwd_hash_params.socket_id = socketid;
> >  	ipv6_l3fwd_lookup_struct[socketid] =
> > @@ -1476,6 +1552,7 @@ main(int argc, char **argv)
> >  	unsigned lcore_id;
> >  	uint64_t hz;
> >  	uint32_t n_tx_queue, nb_lcores;
> > +	uint32_t dev_rxq_num, dev_txq_num;
> >  	uint8_t portid, nb_rx_queue, queue, socketid;
> >
> >  	/* catch SIGINT and restore cpufreq governor to ondemand */
> > @@ -1525,10 +1602,18 @@ main(int argc, char **argv)
> >  		printf("Initializing port %d ... ", portid );
> >  		fflush(stdout);
> >
> > +		rte_eth_dev_info_get(portid, &dev_info);
> > +		dev_rxq_num = dev_info.max_rx_queues;
> > +		dev_txq_num = dev_info.max_tx_queues;
> > +
> >  		nb_rx_queue = get_port_n_rx_queues(portid);
> > +		if (nb_rx_queue > dev_rxq_num)
> > +			rte_exit(EXIT_FAILURE, "Cannot configure not existed rxq: "
> > +					"port=%d\n", portid);
> > +
> >  		n_tx_queue = nb_lcores;
> > -		if (n_tx_queue > MAX_TX_QUEUE_PER_PORT)
> > -			n_tx_queue = MAX_TX_QUEUE_PER_PORT;
> > +		if (n_tx_queue > dev_txq_num)
> > +			n_tx_queue = dev_txq_num;
> >  		printf("Creating queues: nb_rxq=%d nb_txq=%u... ",
> >  			nb_rx_queue, (unsigned)n_tx_queue );
> >  		ret = rte_eth_dev_configure(portid, nb_rx_queue,
> > @@ -1552,6 +1637,9 @@ main(int argc, char **argv)
> >  			if (rte_lcore_is_enabled(lcore_id) == 0)
> >  				continue;
> >
> > +			if (queueid >= dev_txq_num)
> > +				continue;
> > +
> >  			if (numa_on)
> >  				socketid = \
> >  				(uint8_t)rte_lcore_to_socket_id(lcore_id);
> > @@ -1586,8 +1674,9 @@ main(int argc, char **argv)
> >  		/* init power management library */
> >  		ret = rte_power_init(lcore_id);
> >  		if (ret)
> > -			rte_exit(EXIT_FAILURE, "Power management library "
> > -				"initialization failed on core%u\n", lcore_id);
> > +			rte_log(RTE_LOG_ERR, RTE_LOGTYPE_POWER,
> > +				"Power management library initialization "
> > +				"failed on core%u", lcore_id);
> >
> >  		/* init timer structures for each enabled lcore */
> >  		rte_timer_init(&power_timers[lcore_id]);
> > @@ -1635,7 +1724,6 @@ main(int argc, char **argv)
> >  		if (ret < 0)
> >  			rte_exit(EXIT_FAILURE, "rte_eth_dev_start: err=%d, "
> >  						"port=%d\n", ret, portid);
> > -
> >  		/*
> >  		 * If enabled, put device in promiscuous mode.
> >  		 * This allows IO forwarding mode to forward packets
> > --
> > 1.8.1.4

      reply	other threads:[~2015-01-29  4:07 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-01-28  9:50 [dpdk-dev] [PATCH v1 0/5] Interrupt mode for PMD Danny Zhou
2015-01-28  9:50 ` [dpdk-dev] [PATCH v1 1/5] ethdev: add rx interrupt enable/disable functions Danny Zhou
2015-01-29  2:22   ` Qiu, Michael
2015-01-28  9:50 ` [dpdk-dev] [PATCH v1 2/5] ixgbe: enable rx queue interrupts for both PF and VF Danny Zhou
2015-01-29  3:40   ` Qiu, Michael
2015-01-29  5:39     ` Zhou, Danny
2015-01-29 10:13       ` Qiu, Michael
2015-01-28  9:50 ` [dpdk-dev] [PATCH v1 3/5] igb: enable rx queue interrupts for PF Danny Zhou
2015-01-28  9:50 ` [dpdk-dev] [PATCH v1 4/5] eal: add per rx queue interrupt handling based on VFIO Danny Zhou
2015-01-28 18:10   ` Liang, Cunming
2015-01-29  4:01     ` Zhou, Danny
2015-01-29  5:06   ` Qiu, Michael
2015-01-29  5:24     ` Zhou, Danny
2015-01-28  9:50 ` [dpdk-dev] [PATCH v1 5/5] L3fwd-power: enable one-shot rx interrupt and polling/interrupt mode switch Danny Zhou
2015-01-28 18:34   ` Liang, Cunming
2015-01-29  4:07     ` Zhou, Danny [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=DFDF335405C17848924A094BC35766CF0AA590A6@SHSMSX104.ccr.corp.intel.com \
    --to=danny.zhou@intel.com \
    --cc=cunming.liang@intel.com \
    --cc=dev@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).