From: "Vargas, Hernan" <hernan.vargas@intel.com>
To: "Chautru, Nicolas" <nicolas.chautru@intel.com>,
"dev@dpdk.org" <dev@dpdk.org>,
"gakhil@marvell.com" <gakhil@marvell.com>,
"trix@redhat.com" <trix@redhat.com>,
"maxime.coquelin@redhat.com" <maxime.coquelin@redhat.com>
Cc: "thomas@monjalon.net" <thomas@monjalon.net>,
"Kinsella, Ray" <ray.kinsella@intel.com>,
"Richardson, Bruce" <bruce.richardson@intel.com>,
"hemant.agrawal@nxp.com" <hemant.agrawal@nxp.com>,
"david.marchand@redhat.com" <david.marchand@redhat.com>,
"stable@dpdk.org" <stable@dpdk.org>
Subject: RE: [PATCH v7 1/6] baseband/acc100: update companion PF configure function
Date: Fri, 3 Jun 2022 20:25:18 +0000 [thread overview]
Message-ID: <DM6PR11MB36608441D351A69CCB280B68EFA19@DM6PR11MB3660.namprd11.prod.outlook.com> (raw)
In-Reply-To: <1654036307-182860-2-git-send-email-nicolas.chautru@intel.com>
-----Original Message-----
From: Chautru, Nicolas <nicolas.chautru@intel.com>
Sent: Tuesday, May 31, 2022 5:32 PM
To: dev@dpdk.org; gakhil@marvell.com; trix@redhat.com; maxime.coquelin@redhat.com
Cc: thomas@monjalon.net; Kinsella, Ray <ray.kinsella@intel.com>; Richardson, Bruce <bruce.richardson@intel.com>; hemant.agrawal@nxp.com; Vargas, Hernan <hernan.vargas@intel.com>; david.marchand@redhat.com; Chautru, Nicolas <nicolas.chautru@intel.com>; stable@dpdk.org
Subject: [PATCH v7 1/6] baseband/acc100: update companion PF configure function
Update of the device configuration function from PF used for bbdev-test to latest sequence for ACC199 PRQ device and matching version in pf_bb_config 22.03.
Fixes: b17d70922d5d ("baseband/acc100: add configure function")
Cc: stable@dpdk.org
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
---
drivers/baseband/acc100/acc100_pf_enum.h | 18 ++++ drivers/baseband/acc100/rte_acc100_pmd.c | 163 +++++++++++++++++++++++-------- drivers/baseband/acc100/rte_acc100_pmd.h | 20 +++-
3 files changed, 153 insertions(+), 48 deletions(-)
Reviewed-by: Hernan Vargas <hernan.vargas@intel.com>
Thanks,
Hernan
diff --git a/drivers/baseband/acc100/acc100_pf_enum.h b/drivers/baseband/acc100/acc100_pf_enum.h
index a1ee416..2fba667 100644
--- a/drivers/baseband/acc100/acc100_pf_enum.h
+++ b/drivers/baseband/acc100/acc100_pf_enum.h
@@ -238,6 +238,24 @@ enum {
HWPfPermonBTotalLatLowBusMon = 0x00BAC504,
HWPfPermonBTotalLatUpperBusMon = 0x00BAC508,
HWPfPermonBTotalReqCntBusMon = 0x00BAC50C,
+ HwPfFabI2MArbCntrlReg = 0x00BB0000,
+ HWPfFabricMode = 0x00BB1000,
+ HwPfFabI2MGrp0DebugReg = 0x00BBF000,
+ HwPfFabI2MGrp1DebugReg = 0x00BBF004,
+ HwPfFabI2MGrp2DebugReg = 0x00BBF008,
+ HwPfFabI2MGrp3DebugReg = 0x00BBF00C,
+ HwPfFabI2MBuf0DebugReg = 0x00BBF010,
+ HwPfFabI2MBuf1DebugReg = 0x00BBF014,
+ HwPfFabI2MBuf2DebugReg = 0x00BBF018,
+ HwPfFabI2MBuf3DebugReg = 0x00BBF01C,
+ HwPfFabM2IBuf0Grp0DebugReg = 0x00BBF020,
+ HwPfFabM2IBuf1Grp0DebugReg = 0x00BBF024,
+ HwPfFabM2IBuf0Grp1DebugReg = 0x00BBF028,
+ HwPfFabM2IBuf1Grp1DebugReg = 0x00BBF02C,
+ HwPfFabM2IBuf0Grp2DebugReg = 0x00BBF030,
+ HwPfFabM2IBuf1Grp2DebugReg = 0x00BBF034,
+ HwPfFabM2IBuf0Grp3DebugReg = 0x00BBF038,
+ HwPfFabM2IBuf1Grp3DebugReg = 0x00BBF03C,
HWPfFecUl5gCntrlReg = 0x00BC0000,
HWPfFecUl5gI2MThreshReg = 0x00BC0004,
HWPfFecUl5gVersionReg = 0x00BC0100,
diff --git a/drivers/baseband/acc100/rte_acc100_pmd.c b/drivers/baseband/acc100/rte_acc100_pmd.c
index de7e4bc..79bee43 100644
--- a/drivers/baseband/acc100/rte_acc100_pmd.c
+++ b/drivers/baseband/acc100/rte_acc100_pmd.c
@@ -141,8 +141,8 @@
int acc_enum = accFromQgid(qg_idx, acc100_conf);
qtopFromAcc(&q_top, acc_enum, acc100_conf);
if (unlikely(q_top == NULL))
- return 0;
- return q_top->aq_depth_log2;
+ return 1;
+ return RTE_MAX(1, q_top->aq_depth_log2);
}
/* Return the AQ depth for a Queue Group Index */ @@ -4411,7 +4411,7 @@ static int acc100_pci_remove(struct rte_pci_device *pci_dev) {
rte_bbdev_log(INFO, "rte_acc100_configure");
uint32_t value, address, status;
- int qg_idx, template_idx, vf_idx, acc, i;
+ int qg_idx, template_idx, vf_idx, acc, i, j;
struct rte_bbdev *bbdev = rte_bbdev_get_named_dev(dev_name);
/* Compile time checks */
@@ -4431,6 +4431,9 @@ static int acc100_pci_remove(struct rte_pci_device *pci_dev)
/* Store configuration */
rte_memcpy(&d->acc100_conf, conf, sizeof(d->acc100_conf));
+ value = acc100_reg_read(d, HwPfPcieGpexBridgeControl);
+ bool firstCfg = (value != ACC100_CFG_PCI_BRIDGE);
+
/* PCIe Bridge configuration */
acc100_reg_write(d, HwPfPcieGpexBridgeControl, ACC100_CFG_PCI_BRIDGE);
for (i = 1; i < ACC100_GPEX_AXIMAP_NUM; i++) @@ -4451,20 +4454,9 @@ static int acc100_pci_remove(struct rte_pci_device *pci_dev)
value = 1;
acc100_reg_write(d, address, value);
- /* DDR Configuration */
- address = HWPfDdrBcTim6;
- value = acc100_reg_read(d, address);
- value &= 0xFFFFFFFB; /* Bit 2 */
-#ifdef ACC100_DDR_ECC_ENABLE
- value |= 0x4;
-#endif
- acc100_reg_write(d, address, value);
- address = HWPfDdrPhyDqsCountNum;
-#ifdef ACC100_DDR_ECC_ENABLE
- value = 9;
-#else
- value = 8;
-#endif
+ /* Enable granular dynamic clock gating */
+ address = HWPfHiClkGateHystReg;
+ value = ACC100_CLOCK_GATING_EN;
acc100_reg_write(d, address, value);
/* Set default descriptor signature */ @@ -4482,6 +4474,17 @@ static int acc100_pci_remove(struct rte_pci_device *pci_dev)
address = HWPfDmaAxcacheReg;
acc100_reg_write(d, address, value);
+ /* Adjust PCIe Lane adaptation */
+ for (i = 0; i < ACC100_QUAD_NUMS; i++)
+ for (j = 0; j < ACC100_LANES_PER_QUAD; j++)
+ acc100_reg_write(d, HwPfPcieLnAdaptctrl + i * ACC100_PCIE_QUAD_OFFSET
+ + j * ACC100_PCIE_LANE_OFFSET, ACC100_ADAPT);
+
+ /* Enable PCIe live adaptation */
+ for (i = 0; i < ACC100_QUAD_NUMS; i++)
+ acc100_reg_write(d, HwPfPciePcsEqControl +
+ i * ACC100_PCIE_QUAD_OFFSET, ACC100_PCS_EQ);
+
/* Default DMA Configuration (Qmgr Enabled) */
address = HWPfDmaConfig0Reg;
value = 0;
@@ -4500,6 +4503,11 @@ static int acc100_pci_remove(struct rte_pci_device *pci_dev)
value = HWPfQmgrEgressQueuesTemplate;
acc100_reg_write(d, address, value);
+ /* Default Fabric Mode */
+ address = HWPfFabricMode;
+ value = ACC100_FABRIC_MODE;
+ acc100_reg_write(d, address, value);
+
/* ===== Qmgr Configuration ===== */
/* Configuration of the AQueue Depth QMGR_GRP_0_DEPTH_LOG2 for UL */
int totalQgs = conf->q_ul_4g.num_qgroups + @@ -4518,22 +4526,17 @@ static int acc100_pci_remove(struct rte_pci_device *pci_dev)
}
/* Template Priority in incremental order */
- for (template_idx = 0; template_idx < ACC100_NUM_TMPL;
- template_idx++) {
- address = HWPfQmgrGrpTmplateReg0Indx +
- ACC100_BYTES_IN_WORD * (template_idx % 8);
+ for (template_idx = 0; template_idx < ACC100_NUM_TMPL; template_idx++) {
+ address = HWPfQmgrGrpTmplateReg0Indx + ACC100_BYTES_IN_WORD *
+template_idx;
value = ACC100_TMPL_PRI_0;
acc100_reg_write(d, address, value);
- address = HWPfQmgrGrpTmplateReg1Indx +
- ACC100_BYTES_IN_WORD * (template_idx % 8);
+ address = HWPfQmgrGrpTmplateReg1Indx + ACC100_BYTES_IN_WORD *
+template_idx;
value = ACC100_TMPL_PRI_1;
acc100_reg_write(d, address, value);
- address = HWPfQmgrGrpTmplateReg2indx +
- ACC100_BYTES_IN_WORD * (template_idx % 8);
+ address = HWPfQmgrGrpTmplateReg2indx + ACC100_BYTES_IN_WORD *
+template_idx;
value = ACC100_TMPL_PRI_2;
acc100_reg_write(d, address, value);
- address = HWPfQmgrGrpTmplateReg3Indx +
- ACC100_BYTES_IN_WORD * (template_idx % 8);
+ address = HWPfQmgrGrpTmplateReg3Indx + ACC100_BYTES_IN_WORD *
+template_idx;
value = ACC100_TMPL_PRI_3;
acc100_reg_write(d, address, value);
}
@@ -4584,9 +4587,6 @@ static int acc100_pci_remove(struct rte_pci_device *pci_dev)
numEngines++;
} else
acc100_reg_write(d, address, 0);
-#if RTE_ACC100_SINGLE_FEC == 1
- value = 0;
-#endif
}
printf("Number of 5GUL engines %d\n", numEngines);
/* 4GDL */
@@ -4601,9 +4601,6 @@ static int acc100_pci_remove(struct rte_pci_device *pci_dev)
address = HWPfQmgrGrpTmplateReg4Indx
+ ACC100_BYTES_IN_WORD * template_idx;
acc100_reg_write(d, address, value);
-#if RTE_ACC100_SINGLE_FEC == 1
- value = 0;
-#endif
}
/* 5GDL */
numQqsAcc += numQgs;
@@ -4617,13 +4614,10 @@ static int acc100_pci_remove(struct rte_pci_device *pci_dev)
address = HWPfQmgrGrpTmplateReg4Indx
+ ACC100_BYTES_IN_WORD * template_idx;
acc100_reg_write(d, address, value);
-#if RTE_ACC100_SINGLE_FEC == 1
- value = 0;
-#endif
}
/* Queue Group Function mapping */
- int qman_func_id[5] = {0, 2, 1, 3, 4};
+ int qman_func_id[8] = {0, 2, 1, 3, 4, 0, 0, 0};
address = HWPfQmgrGrpFunction0;
value = 0;
for (qg_idx = 0; qg_idx < 8; qg_idx++) { @@ -4654,7 +4648,7 @@ static int acc100_pci_remove(struct rte_pci_device *pci_dev)
}
}
- /* This pointer to ARAM (256kB) is shifted by 2 (4B per register) */
+ /* This pointer to ARAM (128kB) is shifted by 2 (4B per register) */
uint32_t aram_address = 0;
for (qg_idx = 0; qg_idx < totalQgs; qg_idx++) {
for (vf_idx = 0; vf_idx < conf->num_vf_bundles; vf_idx++) { @@ -4679,6 +4673,11 @@ static int acc100_pci_remove(struct rte_pci_device *pci_dev)
/* ==== HI Configuration ==== */
+ /* No Info Ring/MSI by default */
+ acc100_reg_write(d, HWPfHiInfoRingIntWrEnRegPf, 0);
+ acc100_reg_write(d, HWPfHiInfoRingVf2pfLoWrEnReg, 0);
+ acc100_reg_write(d, HWPfHiCfgMsiIntWrEnRegPf, 0xFFFFFFFF);
+ acc100_reg_write(d, HWPfHiCfgMsiVf2pfLoWrEnReg, 0xFFFFFFFF);
/* Prevent Block on Transmit Error */
address = HWPfHiBlockTransmitOnErrorEn;
value = 0;
@@ -4691,10 +4690,6 @@ static int acc100_pci_remove(struct rte_pci_device *pci_dev)
address = HWPfHiPfMode;
value = (conf->pf_mode_en) ? ACC100_PF_VAL : 0;
acc100_reg_write(d, address, value);
- /* Enable Error Detection in HW */
- address = HWPfDmaErrorDetectionEn;
- value = 0x3D7;
- acc100_reg_write(d, address, value);
/* QoS overflow init */
value = 1;
@@ -4704,7 +4699,7 @@ static int acc100_pci_remove(struct rte_pci_device *pci_dev)
acc100_reg_write(d, address, value);
/* HARQ DDR Configuration */
- unsigned int ddrSizeInMb = 512; /* Fixed to 512 MB per VF for now */
+ unsigned int ddrSizeInMb = ACC100_HARQ_DDR;
for (vf_idx = 0; vf_idx < conf->num_vf_bundles; vf_idx++) {
address = HWPfDmaVfDdrBaseRw + vf_idx
* 0x10;
@@ -4718,6 +4713,88 @@ static int acc100_pci_remove(struct rte_pci_device *pci_dev)
if (numEngines < (ACC100_SIG_UL_5G_LAST + 1))
poweron_cleanup(bbdev, d, conf);
+ uint32_t version = 0;
+ for (i = 0; i < 4; i++)
+ version += acc100_reg_read(d,
+ HWPfDdrPhyIdtmFwVersion + 4 * i) << (8 * i);
+ if (version != ACC100_PRQ_DDR_VER) {
+ printf("* Note: Not on DDR PRQ version %8x != %08x\n",
+ version, ACC100_PRQ_DDR_VER);
+ } else if (firstCfg) {
+ /* ---- DDR configuration at boot up --- */
+ /* Read Clear Ddr training status */
+ acc100_reg_read(d, HWPfChaDdrStDoneStatus);
+ /* Reset PHY/IDTM/UMMC */
+ acc100_reg_write(d, HWPfChaDdrWbRstCfg, 3);
+ acc100_reg_write(d, HWPfChaDdrApbRstCfg, 2);
+ acc100_reg_write(d, HWPfChaDdrPhyRstCfg, 2);
+ acc100_reg_write(d, HWPfChaDdrCpuRstCfg, 3);
+ acc100_reg_write(d, HWPfChaDdrSifRstCfg, 2);
+ usleep(ACC100_MS_IN_US);
+ /* Reset WB and APB resets */
+ acc100_reg_write(d, HWPfChaDdrWbRstCfg, 2);
+ acc100_reg_write(d, HWPfChaDdrApbRstCfg, 3);
+ /* Configure PHY-IDTM */
+ acc100_reg_write(d, HWPfDdrPhyIdletimeout, 0x3e8);
+ /* IDTM timing registers */
+ acc100_reg_write(d, HWPfDdrPhyRdLatency, 0x13);
+ acc100_reg_write(d, HWPfDdrPhyRdLatencyDbi, 0x15);
+ acc100_reg_write(d, HWPfDdrPhyWrLatency, 0x10011);
+ /* Configure SDRAM MRS registers */
+ acc100_reg_write(d, HWPfDdrPhyMr01Dimm, 0x3030b70);
+ acc100_reg_write(d, HWPfDdrPhyMr01DimmDbi, 0x3030b50);
+ acc100_reg_write(d, HWPfDdrPhyMr23Dimm, 0x30);
+ acc100_reg_write(d, HWPfDdrPhyMr67Dimm, 0xc00);
+ acc100_reg_write(d, HWPfDdrPhyMr45Dimm, 0x4000000);
+ /* Configure active lanes */
+ acc100_reg_write(d, HWPfDdrPhyDqsCountMax, 0x9);
+ acc100_reg_write(d, HWPfDdrPhyDqsCountNum, 0x9);
+ /* Configure WR/RD leveling timing registers */
+ acc100_reg_write(d, HWPfDdrPhyWrlvlWwRdlvlRr, 0x101212);
+ /* Configure what trainings to execute */
+ acc100_reg_write(d, HWPfDdrPhyTrngType, 0x2d3c);
+ /* Releasing PHY reset */
+ acc100_reg_write(d, HWPfChaDdrPhyRstCfg, 3);
+ /* Configure Memory Controller registers */
+ acc100_reg_write(d, HWPfDdrMemInitPhyTrng0, 0x3);
+ acc100_reg_write(d, HWPfDdrBcDram, 0x3c232003);
+ acc100_reg_write(d, HWPfDdrBcAddrMap, 0x31);
+ /* Configure UMMC BC timing registers */
+ acc100_reg_write(d, HWPfDdrBcRef, 0xa22);
+ acc100_reg_write(d, HWPfDdrBcTim0, 0x4050501);
+ acc100_reg_write(d, HWPfDdrBcTim1, 0xf0b0476);
+ acc100_reg_write(d, HWPfDdrBcTim2, 0x103);
+ acc100_reg_write(d, HWPfDdrBcTim3, 0x144050a1);
+ acc100_reg_write(d, HWPfDdrBcTim4, 0x23300);
+ acc100_reg_write(d, HWPfDdrBcTim5, 0x4230276);
+ acc100_reg_write(d, HWPfDdrBcTim6, 0x857914);
+ acc100_reg_write(d, HWPfDdrBcTim7, 0x79100232);
+ acc100_reg_write(d, HWPfDdrBcTim8, 0x100007ce);
+ acc100_reg_write(d, HWPfDdrBcTim9, 0x50020);
+ acc100_reg_write(d, HWPfDdrBcTim10, 0x40ee);
+ /* Configure UMMC DFI timing registers */
+ acc100_reg_write(d, HWPfDdrDfiInit, 0x5000);
+ acc100_reg_write(d, HWPfDdrDfiTim0, 0x15030006);
+ acc100_reg_write(d, HWPfDdrDfiTim1, 0x11305);
+ acc100_reg_write(d, HWPfDdrDfiPhyUpdEn, 0x1);
+ acc100_reg_write(d, HWPfDdrUmmcIntEn, 0x1f);
+ /* Release IDTM CPU out of reset */
+ acc100_reg_write(d, HWPfChaDdrCpuRstCfg, 0x2);
+ /* Wait PHY-IDTM to finish static training */
+ for (i = 0; i < ACC100_DDR_TRAINING_MAX; i++) {
+ usleep(ACC100_MS_IN_US);
+ value = acc100_reg_read(d,
+ HWPfChaDdrStDoneStatus);
+ if (value & 1)
+ break;
+ }
+ printf("DDR Training completed in %d ms", i);
+ /* Enable Memory Controller */
+ acc100_reg_write(d, HWPfDdrUmmcCtrl, 0x401);
+ /* Release AXI interface reset */
+ acc100_reg_write(d, HWPfChaDdrSifRstCfg, 3);
+ }
+
rte_bbdev_log_debug("PF Tip configuration complete for %s", dev_name);
return 0;
}
diff --git a/drivers/baseband/acc100/rte_acc100_pmd.h b/drivers/baseband/acc100/rte_acc100_pmd.h
index cbcece2..071b37c 100644
--- a/drivers/baseband/acc100/rte_acc100_pmd.h
+++ b/drivers/baseband/acc100/rte_acc100_pmd.h
@@ -31,11 +31,6 @@
#define RTE_ACC100_PF_DEVICE_ID (0x0d5c)
#define RTE_ACC100_VF_DEVICE_ID (0x0d5d)
-/* Define as 1 to use only a single FEC engine */ -#ifndef RTE_ACC100_SINGLE_FEC -#define RTE_ACC100_SINGLE_FEC 0 -#endif
-
/* Values used in filling in descriptors */
#define ACC100_DMA_DESC_TYPE 2
#define ACC100_DMA_CODE_BLK_MODE 0
@@ -153,6 +148,12 @@
#define ACC100_CFG_QMGR_HI_P 0x0F0F
#define ACC100_CFG_PCI_AXI 0xC003
#define ACC100_CFG_PCI_BRIDGE 0x40006033
+#define ACC100_QUAD_NUMS 4
+#define ACC100_LANES_PER_QUAD 4
+#define ACC100_PCIE_LANE_OFFSET 0x200
+#define ACC100_PCIE_QUAD_OFFSET 0x2000
+#define ACC100_PCS_EQ 0x6007
+#define ACC100_ADAPT 0x8400
#define ACC100_ENGINE_OFFSET 0x1000
#define ACC100_RESET_HI 0x20100
#define ACC100_RESET_LO 0x20000
@@ -160,6 +161,15 @@
#define ACC100_ENGINES_MAX 9
#define ACC100_LONG_WAIT 1000
#define ACC100_GPEX_AXIMAP_NUM 17
+#define ACC100_CLOCK_GATING_EN 0x30000
+#define ACC100_FABRIC_MODE 0xB
+/* DDR Size per VF - 512MB by default
+ * Can be increased up to 4 GB with single PF/VF */
+#define ACC100_HARQ_DDR (512 * 1)
+#define ACC100_PRQ_DDR_VER 0x10092020
+#define ACC100_MS_IN_US (1000)
+#define ACC100_DDR_TRAINING_MAX (5000)
/* ACC100 DMA Descriptor triplet */
struct acc100_dma_triplet {
--
1.8.3.1
next prev parent reply other threads:[~2022-06-03 20:25 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1651083423-33202-1-git-send-email-nicolas.chautru@intel.com>
[not found] ` <1653341116-50325-1-git-send-email-nicolas.chautru@intel.com>
2022-05-23 21:25 ` [PATCH v4 1/5] " Nicolas Chautru
2022-05-23 21:25 ` [PATCH v4 2/5] baseband/acc100: add protection for some negative scenario Nicolas Chautru
[not found] ` <1653350912-53876-1-git-send-email-nicolas.chautru@intel.com>
2022-05-24 0:08 ` [PATCH v5 1/5] baseband/acc100: update companion PF configure function Nicolas Chautru
2022-05-24 0:08 ` [PATCH v5 2/5] baseband/acc100: add protection for some negative scenario Nicolas Chautru
[not found] ` <1653526523-68839-1-git-send-email-nicolas.chautru@intel.com>
2022-05-26 0:55 ` [PATCH v6 1/5] baseband/acc100: update companion PF configure function Nicolas Chautru
2022-05-26 0:55 ` [PATCH v6 2/5] baseband/acc100: add protection for some negative scenario Nicolas Chautru
[not found] ` <1654036307-182860-1-git-send-email-nicolas.chautru@intel.com>
2022-05-31 22:31 ` [PATCH v7 1/6] baseband/acc100: update companion PF configure function Nicolas Chautru
2022-06-02 9:49 ` Kevin Traynor
2022-06-02 16:52 ` Chautru, Nicolas
2022-06-03 20:25 ` Vargas, Hernan [this message]
2022-05-31 22:31 ` [PATCH v7 2/6] baseband/acc100: add protection for some negative scenario Nicolas Chautru
2022-06-02 8:21 ` Maxime Coquelin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=DM6PR11MB36608441D351A69CCB280B68EFA19@DM6PR11MB3660.namprd11.prod.outlook.com \
--to=hernan.vargas@intel.com \
--cc=bruce.richardson@intel.com \
--cc=david.marchand@redhat.com \
--cc=dev@dpdk.org \
--cc=gakhil@marvell.com \
--cc=hemant.agrawal@nxp.com \
--cc=maxime.coquelin@redhat.com \
--cc=nicolas.chautru@intel.com \
--cc=ray.kinsella@intel.com \
--cc=stable@dpdk.org \
--cc=thomas@monjalon.net \
--cc=trix@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).