From: "Wiles, Keith" <keith.wiles@intel.com>
To: Pascal Mazon <pascal.mazon@6wind.com>
Cc: "dev@dpdk.org" <dev@dpdk.org>
Subject: Re: [dpdk-dev] [PATCH 2/6] net/tap: add speed capabilities
Date: Mon, 6 Mar 2017 14:38:25 +0000 [thread overview]
Message-ID: <EBD72535-D783-4D17-AAEE-F67ED096DE1A@intel.com> (raw)
In-Reply-To: <20170306145828.624dcf4a@paques.dev.6wind.com>
> On Mar 6, 2017, at 7:58 AM, Pascal Mazon <pascal.mazon@6wind.com> wrote:
>
> On Fri, 3 Mar 2017 15:27:12 +0000
> "Wiles, Keith" <keith.wiles@intel.com> wrote:
>
>>
>>> On Mar 3, 2017, at 3:46 AM, Pascal Mazon <pascal.mazon@6wind.com>
>>> wrote:
>>>
>>> Tap PMD is flexible, it supports any speed.
>>>
>>> Signed-off-by: Pascal Mazon <pascal.mazon@6wind.com>
>>> ---
>>> doc/guides/nics/features/tap.ini | 1 +
>>> drivers/net/tap/rte_eth_tap.c | 35
>>> +++++++++++++++++++++++++++++++++++ 2 files changed, 36
>>> insertions(+)
>>>
>>> diff --git a/doc/guides/nics/features/tap.ini
>>> b/doc/guides/nics/features/tap.ini index d9b47a003654..dad5a0561087
>>> 100644 --- a/doc/guides/nics/features/tap.ini
>>> +++ b/doc/guides/nics/features/tap.ini
>>> @@ -9,6 +9,7 @@ Jumbo frame = Y
>>> Promiscuous mode = Y
>>> Allmulticast mode = Y
>>> Basic stats = Y
>>> +Speed capabilities = Y
>>> Unicast MAC filter = Y
>>> Other kdrv = Y
>>> ARMv7 = Y
>>> diff --git a/drivers/net/tap/rte_eth_tap.c
>>> b/drivers/net/tap/rte_eth_tap.c index 994c8be701c8..6670dfbb35ce
>>> 100644 --- a/drivers/net/tap/rte_eth_tap.c
>>> +++ b/drivers/net/tap/rte_eth_tap.c
>>> @@ -351,6 +351,40 @@ tap_dev_configure(struct rte_eth_dev *dev
>>> __rte_unused) return 0;
>>> }
>>>
>>> +static uint32_t
>>> +tap_dev_speed_capa(void)
>>> +{
>>> + uint32_t speed = pmd_link.link_speed;
>>> + uint32_t capa = 0;
>>> +
>>> + if (speed >= ETH_SPEED_NUM_10M)
>>> + capa |= ETH_LINK_SPEED_10M;
>>> + if (speed >= ETH_SPEED_NUM_100M)
>>> + capa |= ETH_LINK_SPEED_100M;
>>> + if (speed >= ETH_SPEED_NUM_1G)
>>> + capa |= ETH_LINK_SPEED_1G;
>>> + if (speed >= ETH_SPEED_NUM_5G)
>>> + capa |= ETH_LINK_SPEED_2_5G;
>>> + if (speed >= ETH_SPEED_NUM_5G)
>>> + capa |= ETH_LINK_SPEED_5G;
>>> + if (speed >= ETH_SPEED_NUM_10G)
>>> + capa |= ETH_LINK_SPEED_10G;
>>> + if (speed >= ETH_SPEED_NUM_20G)
>>> + capa |= ETH_LINK_SPEED_20G;
>>> + if (speed >= ETH_SPEED_NUM_25G)
>>> + capa |= ETH_LINK_SPEED_25G;
>>> + if (speed >= ETH_SPEED_NUM_40G)
>>> + capa |= ETH_LINK_SPEED_40G;
>>> + if (speed >= ETH_SPEED_NUM_50G)
>>> + capa |= ETH_LINK_SPEED_50G;
>>> + if (speed >= ETH_SPEED_NUM_56G)
>>> + capa |= ETH_LINK_SPEED_56G;
>>> + if (speed >= ETH_SPEED_NUM_100G)
>>> + capa |= ETH_LINK_SPEED_100G;
>>
>> In the real world the NIC may only support 50G an not say 10M, so in
>> that case this code would be wrong as it would set all of the speeds
>> up to 50G. I do not think the code should be changed, but I add a
>> comment to tell the developer the issue here. I do not want someone
>> copying the code and thinking is i correct for a real device.
>>
>
> That's true for actual hardware. But tap is completely virtual, so
> actually it could support any speed (it is limited by userland-kernel
> communication speed).
>
> What speed would you rather have the tap PMD report as capable of?
This note was a very minor picky point and you can ignore my comment here. It is not worth the time to deal with and you have better things to do :-)
>
> Best regards,
> Pascal
>
>>> +
>>> + return capa;
>>> +}
>>> +
>>> static void
>>> tap_dev_info(struct rte_eth_dev *dev, struct rte_eth_dev_info
>>> *dev_info) {
>>> @@ -363,6 +397,7 @@ tap_dev_info(struct rte_eth_dev *dev, struct
>>> rte_eth_dev_info *dev_info) dev_info->max_tx_queues =
>>> internals->nb_queues; dev_info->min_rx_bufsize = 0;
>>> dev_info->pci_dev = NULL;
>>> + dev_info->speed_capa = tap_dev_speed_capa();
>>> }
>>>
>>> static void
>>> --
>>> 2.8.0.rc0
>>>
>>
>> Regards,
>> Keith
>>
>
Regards,
Keith
next prev parent reply other threads:[~2017-03-06 14:38 UTC|newest]
Thread overview: 64+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-03-03 9:46 [dpdk-dev] [PATCH 0/6] net/tap: add additional management ops Pascal Mazon
2017-03-03 9:46 ` [dpdk-dev] [PATCH 1/6] net/tap: add MAC address " Pascal Mazon
2017-03-03 9:46 ` [dpdk-dev] [PATCH 2/6] net/tap: add speed capabilities Pascal Mazon
2017-03-03 15:27 ` Wiles, Keith
2017-03-06 13:58 ` Pascal Mazon
2017-03-06 14:38 ` Wiles, Keith [this message]
2017-03-03 9:46 ` [dpdk-dev] [PATCH 3/6] net/tap: add multicast addresses management Pascal Mazon
2017-03-03 9:46 ` [dpdk-dev] [PATCH 4/6] net/tap: add MTU management Pascal Mazon
2017-03-03 15:23 ` Wiles, Keith
2017-03-06 13:59 ` Pascal Mazon
2017-03-03 9:46 ` [dpdk-dev] [PATCH 5/6] net/tap: add packet type management Pascal Mazon
2017-03-03 15:31 ` Wiles, Keith
2017-03-06 14:10 ` Pascal Mazon
2017-03-06 14:46 ` Wiles, Keith
2017-03-03 9:46 ` [dpdk-dev] [PATCH 6/6] net/tap: add flow control management Pascal Mazon
2017-03-06 16:31 ` [dpdk-dev] [PATCH v2 0/6] net/tap: add additional management ops Pascal Mazon
2017-03-06 16:31 ` [dpdk-dev] [PATCH v2 1/6] net/tap: add MAC address " Pascal Mazon
2017-03-06 16:31 ` [dpdk-dev] [PATCH v2 2/6] net/tap: add speed capabilities Pascal Mazon
2017-03-06 16:31 ` [dpdk-dev] [PATCH v2 3/6] net/tap: add multicast addresses management Pascal Mazon
2017-03-06 16:31 ` [dpdk-dev] [PATCH v2 4/6] net/tap: add MTU management Pascal Mazon
2017-03-06 16:31 ` [dpdk-dev] [PATCH v2 5/6] net/tap: add packet type management Pascal Mazon
2017-03-06 16:31 ` [dpdk-dev] [PATCH v2 6/6] net/tap: add flow control management Pascal Mazon
2017-03-07 16:31 ` [dpdk-dev] [PATCH v3 0/6] net/tap: add additional management ops Pascal Mazon
2017-03-14 8:22 ` [dpdk-dev] [PATCH v4 0/8] " Pascal Mazon
2017-03-14 8:22 ` [dpdk-dev] [PATCH v4 1/8] net/tap: remove wrong IFF_NOARP flags Pascal Mazon
2017-03-14 8:22 ` [dpdk-dev] [PATCH v4 2/8] net/tap: refactor ioctl calls Pascal Mazon
2017-03-14 8:22 ` [dpdk-dev] [PATCH v4 3/8] net/tap: add MAC address management Pascal Mazon
2017-03-14 8:22 ` [dpdk-dev] [PATCH v4 4/8] net/tap: add MTU management Pascal Mazon
2017-03-14 8:22 ` [dpdk-dev] [PATCH v4 5/8] net/tap: add speed capabilities Pascal Mazon
2017-03-14 8:22 ` [dpdk-dev] [PATCH v4 6/8] net/tap: add multicast addresses management Pascal Mazon
2017-03-14 8:22 ` [dpdk-dev] [PATCH v4 7/8] net/tap: add packet type management Pascal Mazon
2017-03-15 13:35 ` Ferruh Yigit
2017-03-15 13:44 ` Pascal Mazon
2017-03-15 14:31 ` Ferruh Yigit
2017-03-15 13:42 ` Ferruh Yigit
2017-03-14 8:22 ` [dpdk-dev] [PATCH v4 8/8] net/tap: add flow control management Pascal Mazon
2017-03-15 13:43 ` [dpdk-dev] [PATCH v4 0/8] net/tap: add additional management ops Ferruh Yigit
2017-03-15 14:48 ` [dpdk-dev] [PATCH v5 " Pascal Mazon
2017-03-15 14:48 ` [dpdk-dev] [PATCH v5 1/8] net/tap: remove wrong IFF_NOARP flags Pascal Mazon
2017-03-15 21:37 ` Wiles, Keith
2017-03-15 14:48 ` [dpdk-dev] [PATCH v5 2/8] net/tap: refactor ioctl calls Pascal Mazon
2017-03-15 14:48 ` [dpdk-dev] [PATCH v5 3/8] net/tap: add MAC address management Pascal Mazon
2017-03-15 14:48 ` [dpdk-dev] [PATCH v5 4/8] net/tap: add MTU management Pascal Mazon
2017-03-15 14:48 ` [dpdk-dev] [PATCH v5 5/8] net/tap: add speed capabilities Pascal Mazon
2017-03-15 14:48 ` [dpdk-dev] [PATCH v5 6/8] net/tap: add multicast addresses management Pascal Mazon
2017-03-15 14:48 ` [dpdk-dev] [PATCH v5 7/8] net/tap: add packet type management Pascal Mazon
2017-03-15 14:48 ` [dpdk-dev] [PATCH v5 8/8] net/tap: add flow control management Pascal Mazon
2017-03-15 16:46 ` [dpdk-dev] [PATCH v5 0/8] net/tap: add additional management ops Ferruh Yigit
2017-03-15 21:44 ` Wiles, Keith
2017-03-07 16:31 ` [dpdk-dev] [PATCH v3 1/6] net/tap: add MAC address " Pascal Mazon
2017-03-09 14:05 ` Ferruh Yigit
2017-03-10 9:01 ` Pascal Mazon
2017-03-07 16:31 ` [dpdk-dev] [PATCH v3 2/6] net/tap: add speed capabilities Pascal Mazon
2017-03-09 14:18 ` Ferruh Yigit
2017-03-09 14:36 ` Wiles, Keith
2017-03-09 16:05 ` Ferruh Yigit
2017-03-10 9:03 ` Pascal Mazon
2017-03-10 9:11 ` Pascal Mazon
2017-03-07 16:31 ` [dpdk-dev] [PATCH v3 3/6] net/tap: add multicast addresses management Pascal Mazon
2017-03-07 16:31 ` [dpdk-dev] [PATCH v3 4/6] net/tap: add MTU management Pascal Mazon
2017-03-07 16:31 ` [dpdk-dev] [PATCH v3 5/6] net/tap: add packet type management Pascal Mazon
2017-03-09 14:26 ` Ferruh Yigit
2017-03-10 12:34 ` Pascal Mazon
2017-03-07 16:31 ` [dpdk-dev] [PATCH v3 6/6] net/tap: add flow control management Pascal Mazon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=EBD72535-D783-4D17-AAEE-F67ED096DE1A@intel.com \
--to=keith.wiles@intel.com \
--cc=dev@dpdk.org \
--cc=pascal.mazon@6wind.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).