DPDK patches and discussions
 help / color / mirror / Atom feed
From: "Tao, Zhe" <zhe.tao@intel.com>
To: "Wu, Jingjing" <jingjing.wu@intel.com>, "dev@dpdk.org" <dev@dpdk.org>
Subject: Re: [dpdk-dev] [PATCH v2 1/2] i40evf: allocate virtchnl cmd buffer for	each vf
Date: Fri, 29 Jan 2016 07:28:18 +0000	[thread overview]
Message-ID: <F142208A4A01684297D6248F041BAB38057DFA09@shsmsx102.ccr.corp.intel.com> (raw)
In-Reply-To: <1453859378-23912-2-git-send-email-jingjing.wu@intel.com>



> -----Original Message-----
> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Jingjing Wu
> Sent: Wednesday, January 27, 2016 9:50 AM
> To: dev@dpdk.org
> Subject: [dpdk-dev] [PATCH v2 1/2] i40evf: allocate virtchnl cmd buffer for
> each vf
> 
> Currently, i40evf PMD uses a global static buffer to send virtchnl command to
> host driver. It is shared by multi VFs.
> This patch changed to allocate virtchnl cmd buffer for each VF.
> 
> Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
> ---
>  drivers/net/i40e/i40e_ethdev.h    |   2 +
>  drivers/net/i40e/i40e_ethdev_vf.c | 181 +++++++++++++++-------------------
> ----
>  2 files changed, 74 insertions(+), 109 deletions(-)
> 
> diff --git a/drivers/net/i40e/i40e_ethdev.h
> b/drivers/net/i40e/i40e_ethdev.h index 1f9792b..93122ad 100644
> --- a/drivers/net/i40e/i40e_ethdev.h
> +++ b/drivers/net/i40e/i40e_ethdev.h
> @@ -494,7 +494,9 @@ struct i40e_vf {
>  	bool link_up;
>  	bool vf_reset;
>  	volatile uint32_t pend_cmd; /* pending command not finished yet */
> +	uint32_t cmd_retval; /* return value of the cmd response from PF */
>  	u16 pend_msg; /* flags indicates events from pf not handled yet */
> +	uint8_t *aq_resp; /* buffer to store the adminq response from PF */
> 
>  	/* VSI info */
>  	struct i40e_virtchnl_vf_resource *vf_res; /* All VSIs */ diff --git
> a/drivers/net/i40e/i40e_ethdev_vf.c b/drivers/net/i40e/i40e_ethdev_vf.c
> index 14d2a50..64e6957 100644
> --- a/drivers/net/i40e/i40e_ethdev_vf.c
> +++ b/drivers/net/i40e/i40e_ethdev_vf.c
> @@ -103,9 +103,6 @@ enum i40evf_aq_result {
>  	I40EVF_MSG_CMD,      /* Read async command result */
>  };
> 
> -/* A share buffer to store the command result from PF driver */ -static
> uint8_t cmd_result_buffer[I40E_AQ_BUF_SZ];
> -
>  static int i40evf_dev_configure(struct rte_eth_dev *dev);  static int
> i40evf_dev_start(struct rte_eth_dev *dev);  static void
> i40evf_dev_stop(struct rte_eth_dev *dev); @@ -237,31 +234,39 @@
> i40evf_set_mac_type(struct i40e_hw *hw)  }
> 
>  /*
> - * Parse admin queue message.
> - *
> - * return value:
> - *  < 0: meet error
> - *  0: read sys msg
> - *  > 0: read cmd result
> + * Read data in admin queue to get msg from pf driver
>   */
>  static enum i40evf_aq_result
> -i40evf_parse_pfmsg(struct i40e_vf *vf,
> -		   struct i40e_arq_event_info *event,
> -		   struct i40evf_arq_msg_info *data)
> +i40evf_read_pfmsg(struct rte_eth_dev *dev, struct i40evf_arq_msg_info
> +*data)
>  {
> -	enum i40e_virtchnl_ops opcode = (enum i40e_virtchnl_ops)\
> -			rte_le_to_cpu_32(event->desc.cookie_high);
> -	enum i40e_status_code retval = (enum i40e_status_code)\
> -			rte_le_to_cpu_32(event->desc.cookie_low);
> -	enum i40evf_aq_result ret = I40EVF_MSG_CMD;
> +	struct i40e_hw *hw = I40E_DEV_PRIVATE_TO_HW(dev->data-
> >dev_private);
> +	struct i40e_vf *vf = I40EVF_DEV_PRIVATE_TO_VF(dev->data-
> >dev_private);
> +	struct i40e_arq_event_info event;
> +	enum i40e_virtchnl_ops opcode;
> +	enum i40e_status_code retval;
> +	int ret;
> +	enum i40evf_aq_result result = I40EVF_MSG_NON;
> 
> +	event.buf_len = data->buf_len;
> +	event.msg_buf = data->msg;
> +	ret = i40e_clean_arq_element(hw, &event, NULL);
> +	/* Can't read any msg from adminQ */
> +	if (ret) {
> +		if (ret == I40E_ERR_ADMIN_QUEUE_NO_WORK)
> +			result = I40EVF_MSG_NON;
> +		else
> +			result = I40EVF_MSG_ERR;
> +		return result;
> +	}
> +
> +	opcode = (enum
> i40e_virtchnl_ops)rte_le_to_cpu_32(event.desc.cookie_high);
> +	retval = (enum
> +i40e_status_code)rte_le_to_cpu_32(event.desc.cookie_low);
>  	/* pf sys event */
>  	if (opcode == I40E_VIRTCHNL_OP_EVENT) {
>  		struct i40e_virtchnl_pf_event *vpe =
> -			(struct i40e_virtchnl_pf_event *)event->msg_buf;
> +			(struct i40e_virtchnl_pf_event *)event.msg_buf;
> 
> -		/* Initialize ret to sys event */
> -		ret = I40EVF_MSG_SYS;
> +		result = I40EVF_MSG_SYS;
>  		switch (vpe->event) {
>  		case I40E_VIRTCHNL_EVENT_LINK_CHANGE:
>  			vf->link_up =
> @@ -286,74 +291,17 @@ i40evf_parse_pfmsg(struct i40e_vf *vf,
>  		}
>  	} else {
>  		/* async reply msg on command issued by vf previously */
> -		ret = I40EVF_MSG_CMD;
> +		result = I40EVF_MSG_CMD;
>  		/* Actual data length read from PF */
> -		data->msg_len = event->msg_len;
> +		data->msg_len = event.msg_len;
>  	}
> -	/* fill the ops and result to notify VF */
> +
>  	data->result = retval;
>  	data->ops = opcode;
> 
> -	return ret;
> -}
> -
> -/*
> - * Read data in admin queue to get msg from pf driver
> - */
> -static enum i40evf_aq_result
> -i40evf_read_pfmsg(struct rte_eth_dev *dev, struct i40evf_arq_msg_info
> *data) -{
> -	struct i40e_hw *hw = I40E_DEV_PRIVATE_TO_HW(dev->data-
> >dev_private);
> -	struct i40e_vf *vf = I40EVF_DEV_PRIVATE_TO_VF(dev->data-
> >dev_private);
> -	struct i40e_arq_event_info event;
> -	int ret;
> -	enum i40evf_aq_result result = I40EVF_MSG_NON;
> -
> -	event.buf_len = data->buf_len;
> -	event.msg_buf = data->msg;
> -	ret = i40e_clean_arq_element(hw, &event, NULL);
> -	/* Can't read any msg from adminQ */
> -	if (ret) {
> -		if (ret == I40E_ERR_ADMIN_QUEUE_NO_WORK)
> -			result = I40EVF_MSG_NON;
> -		else
> -			result = I40EVF_MSG_ERR;
> -		return result;
> -	}
> -
> -	/* Parse the event */
> -	result = i40evf_parse_pfmsg(vf, &event, data);
> -
>  	return result;
>  }
> 
> -/*
> - * Polling read until command result return from pf driver or meet error.
> - */
> -static int
> -i40evf_wait_cmd_done(struct rte_eth_dev *dev,
> -		     struct i40evf_arq_msg_info *data)
> -{
> -	int i = 0;
> -	enum i40evf_aq_result ret;
> -
> -#define MAX_TRY_TIMES 20
> -#define ASQ_DELAY_MS  100
> -	do {
> -		/* Delay some time first */
> -		rte_delay_ms(ASQ_DELAY_MS);
> -		ret = i40evf_read_pfmsg(dev, data);
> -		if (ret == I40EVF_MSG_CMD)
> -			return 0;
> -		else if (ret == I40EVF_MSG_ERR)
> -			return -1;
> -
> -		/* If don't read msg or read sys event, continue */
> -	} while(i++ < MAX_TRY_TIMES);
> -
> -	return -1;
> -}
> -
>  /**
>   * clear current command. Only call in case execute
>   * _atomic_set_cmd successfully.
> @@ -380,13 +328,18 @@ _atomic_set_cmd(struct i40e_vf *vf, enum
> i40e_virtchnl_ops ops)
>  	return !ret;
>  }
> 
> +#define MAX_TRY_TIMES 20
> +#define ASQ_DELAY_MS  100
> +
>  static int
>  i40evf_execute_vf_cmd(struct rte_eth_dev *dev, struct vf_cmd_info *args)
> {
>  	struct i40e_hw *hw = I40E_DEV_PRIVATE_TO_HW(dev->data-
> >dev_private);
>  	struct i40e_vf *vf = I40EVF_DEV_PRIVATE_TO_VF(dev->data-
> >dev_private);
> -	int err = -1;
>  	struct i40evf_arq_msg_info info;
> +	enum i40evf_aq_result ret;
> +	int err = -1;
> +	int i = 0;
> 
>  	if (_atomic_set_cmd(vf, args->ops))
>  		return -1;
> @@ -404,19 +357,22 @@ i40evf_execute_vf_cmd(struct rte_eth_dev *dev,
> struct vf_cmd_info *args)
>  		return err;
>  	}
> 
> -	err = i40evf_wait_cmd_done(dev, &info);
> -	/* read message and it's expected one */
> -	if (!err && args->ops == info.ops)
> -		_clear_cmd(vf);
> -	else if (err) {
> -		PMD_DRV_LOG(ERR, "Failed to read message from
> AdminQ");
> -		_clear_cmd(vf);
> -	}
> -	else if (args->ops != info.ops)
> -		PMD_DRV_LOG(ERR, "command mismatch, expect %u,
> get %u",
> -			    args->ops, info.ops);
> +	do {
> +		/* Delay some time first */
> +		rte_delay_ms(ASQ_DELAY_MS);
> +		ret = i40evf_read_pfmsg(dev, &info);
> +		if (ret == I40EVF_MSG_CMD) {
> +			err = 0;
> +			break;
> +		} else if (ret == I40EVF_MSG_ERR) {
> +			err = -1;
> +			break;
> +		}
> +		/* If don't read msg or read sys event, continue */
> +	} while (i++ < MAX_TRY_TIMES);
> +	_clear_cmd(vf);
> 
> -	return (err | info.result);
> +	return (err | vf->cmd_retval);
>  }
> 
Why combine the i40evf_parse_pfmsg and  i40evf_read_pfmsg into one function i40evf_read_pfmsg?

  reply	other threads:[~2016-01-29  7:28 UTC|newest]

Thread overview: 43+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-01-13 12:31 [dpdk-dev] [PATCH 0/2] i40evf: support interrupt based pf reset request Jingjing Wu
2016-01-13 12:31 ` [dpdk-dev] [PATCH 1/2] i40evf: allocate virtchnl cmd buffer for each vf Jingjing Wu
2016-01-13 12:31 ` [dpdk-dev] [PATCH 2/2] i40evf: support interrupt based pf reset request Jingjing Wu
2016-01-27  1:49 ` [dpdk-dev] [PATCH v2 0/2] " Jingjing Wu
2016-01-27  1:49   ` [dpdk-dev] [PATCH v2 1/2] i40evf: allocate virtchnl cmd buffer for each vf Jingjing Wu
2016-01-29  7:28     ` Tao, Zhe [this message]
2016-02-14  2:22       ` Wu, Jingjing
2016-02-22  7:26     ` Zhang, Helin
2016-01-27  1:49   ` [dpdk-dev] [PATCH v2 2/2] i40evf: support interrupt based pf reset request Jingjing Wu
2016-01-27  8:34     ` David Marchand
2016-02-14  3:25       ` Wu, Jingjing
2016-02-15 13:16         ` David Marchand
2016-02-18  4:06           ` Zhe Tao
2016-02-19  5:51           ` Wu, Jingjing
2016-01-28  7:03     ` Tao, Zhe
2016-02-14  2:12       ` Wu, Jingjing
2016-01-29  8:50     ` Tao, Zhe
2016-02-14  3:04       ` Wu, Jingjing
2016-02-22  8:26     ` Zhang, Helin
2016-02-26  6:51   ` [dpdk-dev] [PATCH v3 0/2] i40evf: pf reset event report Jingjing Wu
2016-02-26  6:51     ` [dpdk-dev] [PATCH v3 1/2] i40evf: allocate virtchnl cmd buffer for each vf Jingjing Wu
2016-02-26  8:12       ` Zhang, Helin
2016-02-26  6:51     ` [dpdk-dev] [PATCH v3 2/2] i40evf: support to report pf reset event Jingjing Wu
2016-02-26  8:13       ` Zhang, Helin
2016-03-08 17:44     ` [dpdk-dev] [PATCH v3 0/2] i40evf: pf reset event report Bruce Richardson
2016-03-09  3:08     ` Zhe Tao
2016-03-09  6:00     ` [dpdk-dev] [PATCH v4 " Jingjing Wu
2016-03-09  6:00       ` [dpdk-dev] [PATCH v4 1/2] i40evf: allocate virtchnl cmd buffer for each vf Jingjing Wu
2016-03-09  6:00       ` [dpdk-dev] [PATCH v4 2/2] i40evf: support to report pf reset event Jingjing Wu
2016-03-09  9:59         ` Thomas Monjalon
2016-03-09 11:01           ` Bruce Richardson
2016-03-09 11:26             ` [dpdk-dev] expectations on maintainer's review Thomas Monjalon
2016-03-09 14:15               ` Bruce Richardson
2016-03-09 14:19                 ` Thomas Monjalon
2016-03-10  3:41       ` [dpdk-dev] [PATCH v5 0/2] i40evf: pf reset event report Jingjing Wu
2016-03-10  3:41         ` [dpdk-dev] [PATCH v5 1/2] i40evf: allocate virtchnl cmd buffer for each vf Jingjing Wu
2016-03-14 12:21           ` Bruce Richardson
2016-03-10  3:41         ` [dpdk-dev] [PATCH v5 2/2] i40evf: support to report pf reset event Jingjing Wu
2016-03-15  1:59         ` [dpdk-dev] [PATCH v6 0/2] i40evf: pf reset event report Jingjing Wu
2016-03-15  1:59           ` [dpdk-dev] [PATCH v6 1/2] i40evf: allocate virtchnl cmd buffer for each vf Jingjing Wu
2016-03-15  1:59           ` [dpdk-dev] [PATCH v6 2/2] i40evf: support to report pf reset event Jingjing Wu
2016-03-22 15:13           ` [dpdk-dev] [PATCH v6 0/2] i40evf: pf reset event report Bruce Richardson
2016-01-27  1:46 [dpdk-dev] [PATCH v2 0/2] i40evf: support interrupt based pf reset request Jingjing Wu
2016-01-27  1:46 ` [dpdk-dev] [PATCH v2 1/2] i40evf: allocate virtchnl cmd buffer for each vf Jingjing Wu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=F142208A4A01684297D6248F041BAB38057DFA09@shsmsx102.ccr.corp.intel.com \
    --to=zhe.tao@intel.com \
    --cc=dev@dpdk.org \
    --cc=jingjing.wu@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).