From: "Zhang, Helin" <helin.zhang@intel.com>
To: "Lu, Wenzhuo" <wenzhuo.lu@intel.com>,
Thomas Monjalon <thomas.monjalon@6wind.com>
Cc: "dev@dpdk.org" <dev@dpdk.org>
Subject: Re: [dpdk-dev] [PATCH 00/37] update ixgbe base driver
Date: Thu, 25 Jun 2015 01:24:11 +0000 [thread overview]
Message-ID: <F35DEAC7BCE34641BA9FAC6BCA4A12E70A886C72@SHSMSX104.ccr.corp.intel.com> (raw)
In-Reply-To: <1435116386-12010-1-git-send-email-wenzhuo.lu@intel.com>
> -----Original Message-----
> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Wenzhuo Lu
> Sent: Wednesday, June 24, 2015 11:26 AM
> To: dev@dpdk.org
> Subject: [dpdk-dev] [PATCH 00/37] update ixgbe base driver
>
> Short summary:
> *update Low Power Link Up to use MAC ops link *fix 1G and 10G link stability for
> x550em SFP+ *update x550em SFP link setup *add shift define for
> EEE_SU.TEEE_DLY *add x550em identify SFP module support *return err when
> SFP module is not present *power down the x550em PHY on overtemp events
> *restore advertised autoneg after setting LPLU *fix UniPHY link configuration
> *add macro for x550em bus speed fuse *add a new 82599 device ID *enable FEC
> when EEE is disabled *release semaphores in proper order *add wait helper for
> IOSF accesses *use a semaphore to serialize IOSF accesses *check for functional
> ucode *add KR/iXFI internal link mode support *check link again after getting
> speed *config MDIO clock for x550em *add support for led_on and led_off for
> X557 PHY LEDs *update EEE/FEC support for device X550EM_X_KR *introduce
> array of mac-type-dependent values *use mvals array for I2C_*_BY_MAC values
> *use mvals array for *_GPI*_BY_MAC values *use mvals array for CIA*_BY_MAC
> values *add new mac-dependent values for x540, x550 *disable SW LPLU
> implementation for x557 V2 *remove FEC disablement for x550em *modify
> register definition code style *specific process for X550 and X550em when
> disabling PCIe master *fix flow control to be KR only *force cs4227 LINE side to
> 10G SR mode *add support for new x550 PHY IDs
>
> Wenzhuo Lu (37):
> ixgbe/base: update readme
> ixgbe/base: update Low Power Link Up to use MAC ops link
> ixgbe/base: fix 1G and 10G link stability for x550em SFP+
> ixgbe/base: update x550em SFP link setup
> ixgbe/base: add shift define for EEE_SU.TEEE_DLY
> ixgbe/base: add x550em identify SFP module support
> ixgbe/base: fix potential warning
> ixgbe/base: return err when SFP module is not present
> ixgbe/base: power down the x550em PHY on overtemp events
> ixgbe/base: restore advertised autoneg after setting LPLU
> ixgbe/base: fix UniPHY link configuration
> ixgbe/base: add macro for x550em bus speed fuse
> ixgbe/base: add a new 82599 device ID
> ixgbe/base: enable FEC when EEE is disabled
> ixgbe/base: release semaphores in proper order
> ixgbe/base: add wait helper for IOSF accesses
> ixgbe/base: use a semaphore to serialize IOSF accesses
> ixgbe/base: check for functional ucode
> ixgbe/base: add KR/iXFI internal link mode support
> ixgbe/base: check link again after getting speed
> ixgbe/base: config MDIO clock for x550em
> ixgbe/base: add support for led_on and led_off for X557 PHY LEDs
> ixgbe/base: update EEE/FEC support for device X550EM_X_KR
> ixgbe/base: introduce array of mac-type-dependent values
> ixgbe/base: use mvals array for I2C_*_BY_MAC values
> ixgbe/base: use mvals array for *_GPI*_BY_MAC values
> ixgbe/base: use mvals array for CIA*_BY_MAC values
> ixgbe/base: add new mac-dependent values for x540, x550
> ixgbe/base: disable SW LPLU implementation for x557 V2
> ixgbe/base: remove FEC disablement for x550em
> ixgbe/base: modify register definition code style
> ixgbe/base: specific process for X550 and X550em when disabling PCIe
> master
> ixgbe/base: fix flow control to be KR only
> ixgbe/base: fix 5G and 2.5G speed description
> ixgbe/base: force cs4227 LINE side to 10G SR mode
> ixgbe/base: a minor optimization for max link up time
> ixgbe/base: add support for new x550 PHY IDs
>
> drivers/net/ixgbe/base/README | 2 +-
> drivers/net/ixgbe/base/ixgbe_82598.c | 4 +-
> drivers/net/ixgbe/base/ixgbe_api.c | 27 ++
> drivers/net/ixgbe/base/ixgbe_common.c | 5 +-
> drivers/net/ixgbe/base/ixgbe_phy.c | 8 +-
> drivers/net/ixgbe/base/ixgbe_phy.h | 7 +-
> drivers/net/ixgbe/base/ixgbe_type.h | 251 +++++++++---
> drivers/net/ixgbe/base/ixgbe_x540.c | 8 +-
> drivers/net/ixgbe/base/ixgbe_x550.c | 699
> ++++++++++++++++++++++++----------
> drivers/net/ixgbe/base/ixgbe_x550.h | 3 +
> 10 files changed, 739 insertions(+), 275 deletions(-)
>
> --
> 1.9.3
Acked-by: Helin Zhang <helin.zhang@intel.com>
next prev parent reply other threads:[~2015-06-25 1:24 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-24 3:25 Wenzhuo Lu
2015-06-24 3:25 ` [dpdk-dev] [PATCH 01/37] ixgbe/base: update readme Wenzhuo Lu
2015-06-24 3:25 ` [dpdk-dev] [PATCH 02/37] ixgbe/base: update Low Power Link Up to use MAC ops link Wenzhuo Lu
2015-06-24 3:25 ` [dpdk-dev] [PATCH 03/37] ixgbe/base: fix 1G and 10G link stability for x550em SFP+ Wenzhuo Lu
2015-06-24 3:25 ` [dpdk-dev] [PATCH 04/37] ixgbe/base: update x550em SFP link setup Wenzhuo Lu
2015-06-24 3:25 ` [dpdk-dev] [PATCH 05/37] ixgbe/base: add shift define for EEE_SU.TEEE_DLY Wenzhuo Lu
2015-06-24 3:25 ` [dpdk-dev] [PATCH 06/37] ixgbe/base: add x550em identify SFP module support Wenzhuo Lu
2015-06-24 3:25 ` [dpdk-dev] [PATCH 07/37] ixgbe/base: fix potential warning Wenzhuo Lu
2015-06-24 3:25 ` [dpdk-dev] [PATCH 08/37] ixgbe/base: return err when SFP module is not present Wenzhuo Lu
2015-06-24 3:25 ` [dpdk-dev] [PATCH 09/37] ixgbe/base: power down the x550em PHY on overtemp events Wenzhuo Lu
2015-06-24 3:25 ` [dpdk-dev] [PATCH 10/37] ixgbe/base: restore advertised autoneg after setting LPLU Wenzhuo Lu
2015-06-24 3:26 ` [dpdk-dev] [PATCH 11/37] ixgbe/base: fix UniPHY link configuration Wenzhuo Lu
2015-06-24 3:26 ` [dpdk-dev] [PATCH 12/37] ixgbe/base: add macro for x550em bus speed fuse Wenzhuo Lu
2015-06-24 3:26 ` [dpdk-dev] [PATCH 13/37] ixgbe/base: add a new 82599 device ID Wenzhuo Lu
2015-06-24 3:26 ` [dpdk-dev] [PATCH 14/37] ixgbe/base: enable FEC when EEE is disabled Wenzhuo Lu
2015-06-24 3:26 ` [dpdk-dev] [PATCH 15/37] ixgbe/base: release semaphores in proper order Wenzhuo Lu
2015-06-24 3:26 ` [dpdk-dev] [PATCH 16/37] ixgbe/base: add wait helper for IOSF accesses Wenzhuo Lu
2015-06-24 3:26 ` [dpdk-dev] [PATCH 17/37] ixgbe/base: use a semaphore to serialize " Wenzhuo Lu
2015-06-24 3:26 ` [dpdk-dev] [PATCH 18/37] ixgbe/base: check for functional ucode Wenzhuo Lu
2015-06-24 3:26 ` [dpdk-dev] [PATCH 19/37] ixgbe/base: add KR/iXFI internal link mode support Wenzhuo Lu
2015-06-24 3:26 ` [dpdk-dev] [PATCH 20/37] ixgbe/base: check link again after getting speed Wenzhuo Lu
2015-06-24 3:26 ` [dpdk-dev] [PATCH 21/37] ixgbe/base: config MDIO clock for x550em Wenzhuo Lu
2015-06-24 3:26 ` [dpdk-dev] [PATCH 22/37] ixgbe/base: add support for led_on and led_off for X557 PHY LEDs Wenzhuo Lu
2015-06-24 3:26 ` [dpdk-dev] [PATCH 23/37] ixgbe/base: update EEE/FEC support for device X550EM_X_KR Wenzhuo Lu
2015-06-24 3:26 ` [dpdk-dev] [PATCH 24/37] ixgbe/base: introduce array of mac-type-dependent values Wenzhuo Lu
2015-06-24 3:26 ` [dpdk-dev] [PATCH 25/37] ixgbe/base: use mvals array for I2C_*_BY_MAC values Wenzhuo Lu
2015-06-24 3:26 ` [dpdk-dev] [PATCH 26/37] ixgbe/base: use mvals array for *_GPI*_BY_MAC values Wenzhuo Lu
2015-06-24 3:26 ` [dpdk-dev] [PATCH 27/37] ixgbe/base: use mvals array for CIA*_BY_MAC values Wenzhuo Lu
2015-06-24 3:26 ` [dpdk-dev] [PATCH 28/37] ixgbe/base: add new mac-dependent values for x540, x550 Wenzhuo Lu
2015-06-24 3:26 ` [dpdk-dev] [PATCH 29/37] ixgbe/base: disable SW LPLU implementation for x557 V2 Wenzhuo Lu
2015-06-24 3:26 ` [dpdk-dev] [PATCH 30/37] ixgbe/base: remove FEC disablement for x550em Wenzhuo Lu
2015-06-24 3:26 ` [dpdk-dev] [PATCH 31/37] ixgbe/base: modify register definition code style Wenzhuo Lu
2015-06-24 3:26 ` [dpdk-dev] [PATCH 32/37] ixgbe/base: specific process for X550 and X550em when disabling PCIe master Wenzhuo Lu
2015-06-24 3:26 ` [dpdk-dev] [PATCH 33/37] ixgbe/base: fix flow control to be KR only Wenzhuo Lu
2015-06-24 3:26 ` [dpdk-dev] [PATCH 34/37] ixgbe/base: fix 5G and 2.5G speed description Wenzhuo Lu
2015-06-24 3:26 ` [dpdk-dev] [PATCH 35/37] ixgbe/base: force cs4227 LINE side to 10G SR mode Wenzhuo Lu
2015-06-24 3:26 ` [dpdk-dev] [PATCH 36/37] ixgbe/base: a minor optimization for max link up time Wenzhuo Lu
2015-06-24 3:26 ` [dpdk-dev] [PATCH 37/37] ixgbe/base: add support for new x550 PHY IDs Wenzhuo Lu
2015-06-25 1:24 ` Zhang, Helin [this message]
2015-06-26 11:27 ` [dpdk-dev] [PATCH 00/37] update ixgbe base driver Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=F35DEAC7BCE34641BA9FAC6BCA4A12E70A886C72@SHSMSX104.ccr.corp.intel.com \
--to=helin.zhang@intel.com \
--cc=dev@dpdk.org \
--cc=thomas.monjalon@6wind.com \
--cc=wenzhuo.lu@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).