DPDK patches and discussions
 help / color / mirror / Atom feed
From: "He, Shaopeng" <shaopeng.he@intel.com>
To: "Chen, Jing D" <jing.d.chen@intel.com>, "dev@dpdk.org" <dev@dpdk.org>
Subject: Re: [dpdk-dev] [PATCH 1/3] fm10k: update VLAN filter
Date: Tue, 9 Jun 2015 07:18:07 +0000	[thread overview]
Message-ID: <FB82FCC69332B84596FE0CEC3C1310949C4B15@shsmsx102.ccr.corp.intel.com> (raw)
In-Reply-To: <4341B239C0EFF9468EE453F9E9F4604D016FA25D@shsmsx102.ccr.corp.intel.com>

> -----Original Message-----
> From: Chen, Jing D
> Sent: Tuesday, June 09, 2015 10:54 AM
> To: He, Shaopeng; dev@dpdk.org
> Cc: Qiu, Michael
> Subject: RE: [PATCH 1/3] fm10k: update VLAN filter
> 
> Hi,
> 
> > -----Original Message-----
> > From: He, Shaopeng
> > Sent: Tuesday, June 02, 2015 10:59 AM
> > To: dev@dpdk.org
> > Cc: Chen, Jing D; Qiu, Michael; He, Shaopeng
> > Subject: [PATCH 1/3] fm10k: update VLAN filter
> >
> > VLAN filter was updated to add/delete one static entry in MAC table
> > for each combination of VLAN and MAC address. More sanity checks were
> added.
> >
> > Signed-off-by: Shaopeng He <shaopeng.he@intel.com>
> > ---
> >  drivers/net/fm10k/fm10k.h        | 23 +++++++++++++++++
> >  drivers/net/fm10k/fm10k_ethdev.c | 55
> > +++++++++++++++++++++++++++++++++++++---
> >  2 files changed, 75 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/net/fm10k/fm10k.h b/drivers/net/fm10k/fm10k.h
> > index ad7a7d1..3b95b72 100644
> > --- a/drivers/net/fm10k/fm10k.h
> > +++ b/drivers/net/fm10k/fm10k.h
> > @@ -109,11 +109,31 @@
> >
> >  #define FM10K_VLAN_TAG_SIZE 4
> >
> > +/* Maximum number of MAC addresses per PF/VF */
> > +#define FM10K_MAX_MACADDR_NUM       1
> > +
> > +#define FM10K_UINT32_BIT_SIZE      (CHAR_BIT * sizeof(uint32_t))
> > +#define FM10K_VFTA_SIZE            (4096 / FM10K_UINT32_BIT_SIZE)
> > +
> > +/* vlan_id is a 12 bit number.
> > + * The VFTA array is actually a 4096 bit array, 128 of 32bit elements.
> > + * 2^5 = 32. The val of lower 5 bits specifies the bit in the 32bit element.
> > + * The higher 7 bit val specifies VFTA array index.
> > + */
> > +#define FM10K_VFTA_BIT(vlan_id)    (1 << ((vlan_id) & 0x1F))
> > +#define FM10K_VFTA_IDX(vlan_id)    ((vlan_id) >> 5)
> > +
> > +struct fm10k_macvlan_filter_info {
> > +	uint16_t vlan_num;       /* Total VLAN number */
> > +	uint32_t vfta[FM10K_VFTA_SIZE];        /* VLAN bitmap */
> > +};
> > +
> >  struct fm10k_dev_info {
> >  	volatile uint32_t enable;
> >  	volatile uint32_t glort;
> >  	/* Protect the mailbox to avoid race condition */
> >  	rte_spinlock_t    mbx_lock;
> > +	struct fm10k_macvlan_filter_info    macvlan;
> >  };
> >
> >  /*
> > @@ -137,6 +157,9 @@ struct fm10k_adapter {  #define
> > FM10K_DEV_PRIVATE_TO_MBXLOCK(adapter) \
> >  	(&(((struct fm10k_adapter *)adapter)->info.mbx_lock))
> >
> > +#define FM10K_DEV_PRIVATE_TO_MACVLAN(adapter) \
> > +		(&(((struct fm10k_adapter *)adapter)->info.macvlan))
> > +
> >  struct fm10k_rx_queue {
> >  	struct rte_mempool *mp;
> >  	struct rte_mbuf **sw_ring;
> > diff --git a/drivers/net/fm10k/fm10k_ethdev.c
> > b/drivers/net/fm10k/fm10k_ethdev.c
> > index 3a26480..d2f3e44 100644
> > --- a/drivers/net/fm10k/fm10k_ethdev.c
> > +++ b/drivers/net/fm10k/fm10k_ethdev.c
> > @@ -819,15 +819,61 @@ fm10k_dev_infos_get(struct rte_eth_dev *dev,
> > static int  fm10k_vlan_filter_set(struct rte_eth_dev *dev, uint16_t
> > vlan_id, int on)  {
> > -	struct fm10k_hw *hw = FM10K_DEV_PRIVATE_TO_HW(dev->data-
> > >dev_private);
> > +	s32 result;
> > +	uint32_t vid_idx, vid_bit, mac_index;
> > +	struct fm10k_hw *hw;
> > +	struct fm10k_macvlan_filter_info *macvlan;
> > +	struct rte_eth_dev_data *data = dev->data;
> >
> > -	PMD_INIT_FUNC_TRACE();
> > +	hw = FM10K_DEV_PRIVATE_TO_HW(dev->data->dev_private);
> > +	macvlan = FM10K_DEV_PRIVATE_TO_MACVLAN(dev->data-
> > >dev_private);
> >
> >  	/* @todo - add support for the VF */
> >  	if (hw->mac.type != fm10k_mac_pf)
> >  		return -ENOTSUP;
> >
> > -	return fm10k_update_vlan(hw, vlan_id, 0, on);
> > +	if (vlan_id > ETH_VLAN_ID_MAX) {
> > +		PMD_INIT_LOG(ERR, "Invalid vlan_id: must be < 4096");
> > +		return (-EINVAL);
> > +	}
> > +
> > +	vid_idx = FM10K_VFTA_IDX(vlan_id);
> > +	vid_bit = FM10K_VFTA_BIT(vlan_id);
> > +	/* this VLAN ID is already in the VLAN filter table, return SUCCESS */
> > +	if (on && (macvlan->vfta[vid_idx] & vid_bit))
> > +		return 0;
> > +	/* this VLAN ID is NOT in the VLAN filter table, cannot remove */
> > +	if (!on && !(macvlan->vfta[vid_idx] & vid_bit)) {
> > +		PMD_INIT_LOG(ERR, "Invalid vlan_id: not existing "
> > +			"in the VLAN filter table");
> > +		return (-EINVAL);
> > +	}
> > +
> > +	fm10k_mbx_lock(hw);
> > +	result = fm10k_update_vlan(hw, vlan_id, 0, on);
> > +	if (FM10K_SUCCESS == result) {
> > +		if (on) {
> > +			macvlan->vlan_num++;
> > +			macvlan->vfta[vid_idx] |= vid_bit;
> > +		} else {
> > +			macvlan->vlan_num--;
> > +			macvlan->vfta[vid_idx] &= ~vid_bit;
> > +		}
> > +
> > +		for (mac_index = 0; mac_index <
> > FM10K_MAX_MACADDR_NUM;
> > +				mac_index++) {
> > +			if (is_zero_ether_addr(&data-
> > >mac_addrs[mac_index]))
> > +				continue;
> > +			fm10k_update_uc_addr(hw, hw->mac.dglort_map,
> > +				data->mac_addrs[mac_index].addr_bytes,
> > +				vlan_id, on, 0);
> 
> 
> Result = fm10k_update_uc_addr()? If meeting any error, it should break.
> In the meanwhile,  I think above if (on)...else... should be moved after the
> loop.
Agree, make sense, thanks for the comment.

  reply	other threads:[~2015-06-09  7:18 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-06-02  2:58 [dpdk-dev] [PATCH 0/3] fm10k: update MAC/VLAN filter and VLAN offload features Shaopeng He
2015-06-02  2:58 ` [dpdk-dev] [PATCH 1/3] fm10k: update VLAN filter Shaopeng He
2015-06-09  2:54   ` Chen, Jing D
2015-06-09  7:18     ` He, Shaopeng [this message]
2015-06-09 15:51   ` Qiu, Michael
2015-06-10  5:52     ` He, Shaopeng
2015-06-02  2:58 ` [dpdk-dev] [PATCH 2/3] fm10k: add MAC filter Shaopeng He
2015-06-09  3:25   ` Chen, Jing D
2015-06-09  8:31     ` He, Shaopeng
2015-06-09 15:59   ` Qiu, Michael
2015-06-10  1:03     ` He, Shaopeng
2015-06-02  2:58 ` [dpdk-dev] [PATCH 3/3] fm10k: update VLAN offload features Shaopeng He
2015-06-09  3:27   ` Chen, Jing D
2015-06-09  8:55     ` He, Shaopeng
2015-06-09 15:40     ` Qiu, Michael
2015-06-10  6:03       ` He, Shaopeng
2015-06-15  1:23 ` [dpdk-dev] [PATCH v2 0/3] fm10k: update MAC/VLAN filter and " Shaopeng He
2015-06-15  1:23   ` [dpdk-dev] [PATCH v2 1/3] fm10k: update VLAN filter Shaopeng He
2015-06-15  1:23   ` [dpdk-dev] [PATCH v2 2/3] fm10k: add MAC filter Shaopeng He
2015-06-16 12:38     ` Qiu, Michael
2015-06-15  1:23   ` [dpdk-dev] [PATCH v2 3/3] fm10k: update VLAN offload features Shaopeng He
2015-06-18  7:21   ` [dpdk-dev] [PATCH v3 0/3] fm10k: update MAC/VLAN filter and " Shaopeng He
2015-06-18  7:21     ` [dpdk-dev] [PATCH v3 1/3] fm10k: update VLAN filter Shaopeng He
2015-06-18  7:21     ` [dpdk-dev] [PATCH v3 2/3] fm10k: add MAC filter Shaopeng He
2015-06-18  7:21     ` [dpdk-dev] [PATCH v3 3/3] fm10k: update VLAN offload features Shaopeng He
2015-06-18  8:23     ` [dpdk-dev] [PATCH v3 0/3] fm10k: update MAC/VLAN filter and " Chen, Jing D
2015-06-22 14:21       ` Thomas Monjalon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=FB82FCC69332B84596FE0CEC3C1310949C4B15@shsmsx102.ccr.corp.intel.com \
    --to=shaopeng.he@intel.com \
    --cc=dev@dpdk.org \
    --cc=jing.d.chen@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).