From: "Xing, Beilei" <beilei.xing@intel.com>
To: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>,
"Guo, Junfeng" <junfeng.guo@intel.com>,
"Zhang, Qi Z" <qi.z.zhang@intel.com>,
"Wu, Jingjing" <jingjing.wu@intel.com>
Cc: "dev@dpdk.org" <dev@dpdk.org>,
"Li, Xiaoyun" <xiaoyun.li@intel.com>,
"Wang, Xiao W" <xiao.w.wang@intel.com>,
"Wu, Wenjun1" <wenjun1.wu@intel.com>
Subject: RE: [PATCH v14 02/18] net/idpf: add support for device initialization
Date: Fri, 28 Oct 2022 17:22:55 +0000 [thread overview]
Message-ID: <LV2PR11MB59974F35636A08BFBFD2F99BF7329@LV2PR11MB5997.namprd11.prod.outlook.com> (raw)
In-Reply-To: <da77bd50-5633-046f-4736-8f3bf0bf4d41@oktetlabs.ru>
> -----Original Message-----
> From: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
> Sent: Friday, October 28, 2022 11:35 PM
> To: Guo, Junfeng <junfeng.guo@intel.com>; Zhang, Qi Z
> <qi.z.zhang@intel.com>; Wu, Jingjing <jingjing.wu@intel.com>; Xing, Beilei
> <beilei.xing@intel.com>
> Cc: dev@dpdk.org; Li, Xiaoyun <xiaoyun.li@intel.com>; Wang, Xiao W
> <xiao.w.wang@intel.com>; Wu, Wenjun1 <wenjun1.wu@intel.com>
> Subject: Re: [PATCH v14 02/18] net/idpf: add support for device initialization
>
> On 10/27/22 10:47, Junfeng Guo wrote:
> > Support device init and add the following dev ops:
> > - dev_configure
> > - dev_close
> > - dev_infos_get
> >
> > Signed-off-by: Beilei Xing <beilei.xing@intel.com>
> > Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
> > Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
> > Signed-off-by: Wenjun Wu <wenjun1.wu@intel.com>
> > Signed-off-by: Junfeng Guo <junfeng.guo@intel.com>
>
> [snip]
>
> > +static int idpf_dev_configure(struct rte_eth_dev *dev); static int
> > +idpf_dev_close(struct rte_eth_dev *dev); static int
> > +idpf_dev_info_get(struct rte_eth_dev *dev,
> > + struct rte_eth_dev_info *dev_info); static void
> > +idpf_adapter_rel(struct idpf_adapter *adapter);
> > +
> > +static const struct eth_dev_ops idpf_eth_dev_ops = {
> > + .dev_configure = idpf_dev_configure,
> > + .dev_close = idpf_dev_close,
> > + .dev_infos_get = idpf_dev_info_get,
> > +};
>
> Typically it is better to avoid forward static declarations and simply define
> the ops structure after callbacks.
OK, will fix it in v15.
>
> > +
> > +static int
> > +idpf_dev_info_get(struct rte_eth_dev *dev, struct rte_eth_dev_info
> > +*dev_info) {
> > + struct idpf_vport *vport = dev->data->dev_private;
> > + struct idpf_adapter *adapter = vport->adapter;
> > +
> > + dev_info->max_rx_queues = adapter->caps->max_rx_q;
> > + dev_info->max_tx_queues = adapter->caps->max_tx_q;
> > + dev_info->min_rx_bufsize = IDPF_MIN_BUF_SIZE;
> > + dev_info->max_rx_pktlen = IDPF_MAX_FRAME_SIZE;
> > +
> > + dev_info->max_mtu = dev_info->max_rx_pktlen -
> IDPF_ETH_OVERHEAD;
> > + dev_info->min_mtu = RTE_ETHER_MIN_MTU;
> > +
> > + dev_info->max_mac_addrs = IDPF_NUM_MACADDR_MAX;
>
> I guess it make sense if and only if you support API to add/remove unicast
> MAC addresses.
Yes, will remove this info.
>
> > +
> > + return 0;
> > +
>
> [snip]
>
> > +static int
> > +idpf_init_vport(struct rte_eth_dev *dev) {
> > + struct idpf_vport *vport = dev->data->dev_private;
> > + struct idpf_adapter *adapter = vport->adapter;
> > + uint16_t idx = adapter->cur_vport_idx;
> > + struct virtchnl2_create_vport *vport_info =
> > + (struct virtchnl2_create_vport *)adapter-
> >vport_recv_info[idx];
> > + int i, type, ret;
> > +
> > + vport->vport_id = vport_info->vport_id;
> > + vport->txq_model = vport_info->txq_model;
> > + vport->rxq_model = vport_info->rxq_model;
> > + vport->num_tx_q = vport_info->num_tx_q;
> > + vport->num_tx_complq = vport_info->num_tx_complq;
> > + vport->num_rx_q = vport_info->num_rx_q;
> > + vport->num_rx_bufq = vport_info->num_rx_bufq;
> > + vport->max_mtu = vport_info->max_mtu;
> > + rte_memcpy(vport->default_mac_addr,
> > + vport_info->default_mac_addr, ETH_ALEN);
> > + vport->sw_idx = idx;
> > +
> > + for (i = 0; i < vport_info->chunks.num_chunks; i++) {
> > + type = vport_info->chunks.chunks[i].type;
> > + switch (type) {
> > + case VIRTCHNL2_QUEUE_TYPE_TX:
> > + vport->chunks_info.tx_start_qid =
> > + vport_info->chunks.chunks[i].start_queue_id;
> > + vport->chunks_info.tx_qtail_start =
> > + vport_info->chunks.chunks[i].qtail_reg_start;
> > + vport->chunks_info.tx_qtail_spacing =
> > + vport_info-
> >chunks.chunks[i].qtail_reg_spacing;
> > + break;
> > + case VIRTCHNL2_QUEUE_TYPE_RX:
> > + vport->chunks_info.rx_start_qid =
> > + vport_info->chunks.chunks[i].start_queue_id;
> > + vport->chunks_info.rx_qtail_start =
> > + vport_info->chunks.chunks[i].qtail_reg_start;
> > + vport->chunks_info.rx_qtail_spacing =
> > + vport_info-
> >chunks.chunks[i].qtail_reg_spacing;
> > + break;
> > + case VIRTCHNL2_QUEUE_TYPE_TX_COMPLETION:
> > + vport->chunks_info.tx_compl_start_qid =
> > + vport_info->chunks.chunks[i].start_queue_id;
> > + vport->chunks_info.tx_compl_qtail_start =
> > + vport_info->chunks.chunks[i].qtail_reg_start;
> > + vport->chunks_info.tx_compl_qtail_spacing =
> > + vport_info-
> >chunks.chunks[i].qtail_reg_spacing;
> > + break;
> > + case VIRTCHNL2_QUEUE_TYPE_RX_BUFFER:
> > + vport->chunks_info.rx_buf_start_qid =
> > + vport_info->chunks.chunks[i].start_queue_id;
> > + vport->chunks_info.rx_buf_qtail_start =
> > + vport_info->chunks.chunks[i].qtail_reg_start;
> > + vport->chunks_info.rx_buf_qtail_spacing =
> > + vport_info-
> >chunks.chunks[i].qtail_reg_spacing;
> > + break;
> > + default:
> > + PMD_INIT_LOG(ERR, "Unsupported queue type");
> > + break;
> > + }
> > + }
> > +
> > + ret = idpf_parse_devarg_id(dev->data->name);
> > + if (ret < 0) {
> > + PMD_INIT_LOG(ERR, "Failed to parse devarg id.");
> > + return -1;
>
> Negative errno must be returned since finally it is used as
> rte_eth_dev_create() return value which is negative errno.
Make sense, will refine the return value, and check all similar cases.
>
> > + }
> > + vport->devarg_id = ret;
> > +
> > + vport->dev_data = dev->data;
> > +
> > + adapter->vports[idx] = vport;
> > +
> > + return 0;
> > +}
> > +
> > +static int
> > +idpf_dev_configure(struct rte_eth_dev *dev) {
> > + struct rte_eth_conf *conf = &dev->data->dev_conf;
> > +
> > + if (conf->link_speeds & RTE_ETH_LINK_SPEED_FIXED) {
> > + PMD_INIT_LOG(ERR, "Setting link speed is not supported");
> > + return -1;
>
> The return value is used as rte_eth_dev_configure() return value which
> should be negative errno, not -1.
>
> Please, double-check all other similar cases.
>
> > + }
> > +
> > + if ((dev->data->nb_rx_queues == 1 && conf->rxmode.mq_mode !=
> RTE_ETH_MQ_RX_NONE) ||
> > + (dev->data->nb_rx_queues > 1 && conf->rxmode.mq_mode !=
> > +RTE_ETH_MQ_RX_RSS)) {
>
> Rigth now (just after the patch) you don't support RSS since you don't
> handle corresponding configuratoin items. So, Nothing except RX_NONE is
> supported. RX_RSS should be added when you really support it (later).
>
> > + PMD_INIT_LOG(ERR, "Multi-queue packet distribution
> mode %d is not supported",
> > + conf->rxmode.mq_mode);
> > + return -1;
> > + }
>
> [snip]
>
> > +struct idpf_adapter *
> > +idpf_find_adapter(struct rte_pci_device *pci_dev) {
> > + struct idpf_adapter *adapter;
> > +
> > + rte_spinlock_lock(&idpf_adapter_lock);
> > + TAILQ_FOREACH(adapter, &idpf_adapter_list, next) {
> > + if (strncmp(adapter->name, pci_dev->device.name,
> PCI_PRI_STR_SIZE) == 0) {
> > + rte_spinlock_unlock(&idpf_adapter_lock);
> > + return adapter;
>
> Pointer to an element of the list protected by spin lock is returned here.
Yes, will fix it in v15.
>
> > + }
> > + }
> > + rte_spinlock_unlock(&idpf_adapter_lock);
> > +
> > + return NULL;
> > +}
>
> [snip]
>
> > +static int
> > +idpf_pci_remove(struct rte_pci_device *pci_dev) {
> > + struct idpf_adapter *adapter = idpf_find_adapter(pci_dev);
>
> Question about locking still stands. I'm not sure that I understand the
> purpose of locking here. Or why can it be omitted.
> Anyway, returing pointer to the list element when the list is protected by
> lock looks suspicous.
>
> > + uint16_t port_id;
> > +
> > + /* Ethdev created can be found RTE_ETH_FOREACH_DEV_OF
> through rte_device */
> > + RTE_ETH_FOREACH_DEV_OF(port_id, &pci_dev->device) {
> > + rte_eth_dev_close(port_id);
> > + }
> > +
> > + rte_spinlock_lock(&idpf_adapter_lock);
> > + TAILQ_REMOVE(&idpf_adapter_list, adapter, next);
> > + rte_spinlock_unlock(&idpf_adapter_lock);
> > + idpf_adapter_rel(adapter);
> > + rte_free(adapter);
> > +
> > + return 0;
> > +}
>
> [snip]
>
> > +int
> > +idpf_vc_get_caps(struct idpf_adapter *adapter) {
> > + struct virtchnl2_get_capabilities caps_msg;
> > + struct idpf_cmd_info args;
> > + int err;
> > +
> > + memset(&caps_msg, 0, sizeof(struct virtchnl2_get_capabilities));
> > + caps_msg.csum_caps =
> > + VIRTCHNL2_CAP_TX_CSUM_L3_IPV4 |
> > + VIRTCHNL2_CAP_TX_CSUM_L4_IPV4_TCP |
> > + VIRTCHNL2_CAP_TX_CSUM_L4_IPV4_UDP |
> > + VIRTCHNL2_CAP_TX_CSUM_L4_IPV4_SCTP |
> > + VIRTCHNL2_CAP_TX_CSUM_L4_IPV6_TCP |
> > + VIRTCHNL2_CAP_TX_CSUM_L4_IPV6_UDP |
> > + VIRTCHNL2_CAP_TX_CSUM_L4_IPV6_SCTP |
> > + VIRTCHNL2_CAP_TX_CSUM_GENERIC |
> > + VIRTCHNL2_CAP_RX_CSUM_L3_IPV4 |
> > + VIRTCHNL2_CAP_RX_CSUM_L4_IPV4_TCP |
> > + VIRTCHNL2_CAP_RX_CSUM_L4_IPV4_UDP |
> > + VIRTCHNL2_CAP_RX_CSUM_L4_IPV4_SCTP |
> > + VIRTCHNL2_CAP_RX_CSUM_L4_IPV6_TCP |
> > + VIRTCHNL2_CAP_RX_CSUM_L4_IPV6_UDP |
> > + VIRTCHNL2_CAP_RX_CSUM_L4_IPV6_SCTP |
> > + VIRTCHNL2_CAP_RX_CSUM_GENERIC;
> > +
> > + caps_msg.seg_caps =
> > + VIRTCHNL2_CAP_SEG_IPV4_TCP |
> > + VIRTCHNL2_CAP_SEG_IPV4_UDP |
> > + VIRTCHNL2_CAP_SEG_IPV4_SCTP |
> > + VIRTCHNL2_CAP_SEG_IPV6_TCP |
> > + VIRTCHNL2_CAP_SEG_IPV6_UDP |
> > + VIRTCHNL2_CAP_SEG_IPV6_SCTP |
> > + VIRTCHNL2_CAP_SEG_GENERIC;
> > +
> > + caps_msg.rss_caps =
> > + VIRTCHNL2_CAP_RSS_IPV4_TCP |
> > + VIRTCHNL2_CAP_RSS_IPV4_UDP |
> > + VIRTCHNL2_CAP_RSS_IPV4_SCTP |
> > + VIRTCHNL2_CAP_RSS_IPV4_OTHER |
> > + VIRTCHNL2_CAP_RSS_IPV6_TCP |
> > + VIRTCHNL2_CAP_RSS_IPV6_UDP |
> > + VIRTCHNL2_CAP_RSS_IPV6_SCTP |
> > + VIRTCHNL2_CAP_RSS_IPV6_OTHER |
> > + VIRTCHNL2_CAP_RSS_IPV4_AH |
> > + VIRTCHNL2_CAP_RSS_IPV4_ESP |
> > + VIRTCHNL2_CAP_RSS_IPV4_AH_ESP |
> > + VIRTCHNL2_CAP_RSS_IPV6_AH |
> > + VIRTCHNL2_CAP_RSS_IPV6_ESP |
> > + VIRTCHNL2_CAP_RSS_IPV6_AH_ESP;
> > +
> > + caps_msg.other_caps =
> > + VIRTCHNL2_CAP_SPLITQ_QSCHED |
> > + VIRTCHNL2_CAP_CRC |
> > + VIRTCHNL2_CAP_WB_ON_ITR |
> > + VIRTCHNL2_CAP_PROMISC |
> > + VIRTCHNL2_CAP_LINK_SPEED |
> > + VIRTCHNL2_CAP_VLAN;
> > +
>
> My question aske in v11 still stands since I have no an answer yet.
> Basically it looks like corresponding caps should be added when
> corresponding offload support is added later. If no, I'd like to understand
> why.
>
> > + args.ops = VIRTCHNL2_OP_GET_CAPS;
> > + args.in_args = (uint8_t *)&caps_msg;
> > + args.in_args_size = sizeof(caps_msg);
> > + args.out_buffer = adapter->mbx_resp;
> > + args.out_size = IDPF_DFLT_MBX_BUF_SIZE;
> > +
> > + err = idpf_execute_vc_cmd(adapter, &args);
> > + if (err != 0) {
> > + PMD_DRV_LOG(ERR,
> > + "Failed to execute command of
> VIRTCHNL2_OP_GET_CAPS");
> > + return err;
> > + }
> > +
> > + rte_memcpy(adapter->caps, args.out_buffer, sizeof(caps_msg));
> > +
> > + return 0;
> > +}
>
> [snip]
>
> > +int
> > +idpf_vc_ena_dis_vport(struct idpf_vport *vport, bool enable) {
> > + struct idpf_adapter *adapter = vport->adapter;
> > + struct virtchnl2_vport vc_vport;
> > + struct idpf_cmd_info args;
> > + int err;
> > +
> > + vc_vport.vport_id = vport->vport_id;
> > + args.ops = enable ? VIRTCHNL2_OP_ENABLE_VPORT :
> > + VIRTCHNL2_OP_DISABLE_VPORT;
> > + args.in_args = (u8 *)&vc_vport;
>
> uint8_t should be used as you do above in idpf_vc_destroy_vport() and
> many other cases.
>
> [snip]
next prev parent reply other threads:[~2022-10-28 17:23 UTC|newest]
Thread overview: 376+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-08-03 11:30 [PATCH 00/13] add support for idpf PMD in DPDK Junfeng Guo
2022-08-03 11:30 ` [PATCH 01/13] net/idpf/base: introduce base code Junfeng Guo
2022-08-03 11:30 ` [PATCH 02/13] net/idpf/base: add logs and OS specific implementation Junfeng Guo
2022-08-03 11:30 ` [PATCH 03/13] net/idpf: support device initialization Junfeng Guo
2022-08-03 15:11 ` Stephen Hemminger
2022-08-08 4:43 ` Guo, Junfeng
2022-10-31 18:00 ` Ali Alnubani
2022-11-01 6:55 ` Xing, Beilei
2022-11-02 15:31 ` Raslan Darawsheh
2022-11-02 15:52 ` Thomas Monjalon
2022-11-03 0:56 ` Xing, Beilei
2022-08-03 11:30 ` [PATCH 04/13] net/idpf: add queue operations Junfeng Guo
2022-08-03 15:16 ` Stephen Hemminger
2022-08-08 4:44 ` Guo, Junfeng
2022-08-03 11:30 ` [PATCH 05/13] net/idpf: add support to get device information Junfeng Guo
2022-08-03 11:30 ` [PATCH 06/13] net/idpf: add support to get packet type Junfeng Guo
2022-08-03 11:30 ` [PATCH 07/13] net/idpf: add support to update link status Junfeng Guo
2022-08-03 11:30 ` [PATCH 08/13] net/idpf: add basic Rx/Tx datapath Junfeng Guo
2022-08-03 11:31 ` [PATCH 09/13] net/idpf: add support for RSS Junfeng Guo
2022-08-03 11:31 ` [PATCH 10/13] net/idpf: add mtu configuration Junfeng Guo
2022-08-03 11:31 ` [PATCH 11/13] net/idpf: add hw statistics Junfeng Guo
2022-08-03 11:31 ` [PATCH 12/13] net/idpf: support write back based on ITR expire Junfeng Guo
2022-08-03 11:31 ` [PATCH 13/13] net/idpf: add AVX512 data path for single queue model Junfeng Guo
2022-09-05 10:58 ` [PATCH v2 00/14] add support for idpf PMD in DPDK Junfeng Guo
2022-09-05 10:58 ` [PATCH v2 01/14] net/idpf/base: introduce base code Junfeng Guo
2022-10-03 13:20 ` Andrew Rybchenko
2022-10-14 9:18 ` Guo, Junfeng
2022-09-05 10:58 ` [PATCH v2 02/14] net/idpf/base: add logs and OS specific implementation Junfeng Guo
2022-10-03 13:20 ` Andrew Rybchenko
2022-10-14 9:18 ` Guo, Junfeng
2022-10-12 8:07 ` Wu, Wenjun1
2022-09-05 10:58 ` [PATCH v2 03/14] net/idpf: add support for device initialization Junfeng Guo
2022-09-21 5:41 ` Xing, Beilei
2022-09-21 6:04 ` Xing, Beilei
2022-10-03 13:44 ` Andrew Rybchenko
2022-10-14 9:18 ` Guo, Junfeng
2022-10-10 7:48 ` Wu, Wenjun1
2022-09-05 10:58 ` [PATCH v2 04/14] net/idpf: add support for queue operations Junfeng Guo
2022-10-03 13:47 ` Andrew Rybchenko
2022-10-14 9:18 ` Guo, Junfeng
2022-09-05 10:58 ` [PATCH v2 05/14] net/idpf: add support for device information get Junfeng Guo
2022-10-03 13:53 ` Andrew Rybchenko
2022-09-05 10:58 ` [PATCH v2 06/14] net/idpf: add support for packet type get Junfeng Guo
2022-10-03 13:58 ` Andrew Rybchenko
2022-10-14 9:18 ` Guo, Junfeng
2022-09-05 10:58 ` [PATCH v2 07/14] net/idpf: add support for link status update Junfeng Guo
2022-09-05 10:58 ` [PATCH v2 08/14] net/idpf: add support for basic Rx/Tx datapath Junfeng Guo
2022-10-03 14:02 ` Andrew Rybchenko
2022-10-14 9:18 ` Guo, Junfeng
2022-09-05 10:58 ` [PATCH v2 09/14] net/idpf: add support for RSS Junfeng Guo
2022-10-03 14:10 ` Andrew Rybchenko
2022-09-05 10:58 ` [PATCH v2 10/14] net/idpf: add support for mtu configuration Junfeng Guo
2022-10-03 14:12 ` Andrew Rybchenko
2022-10-14 9:18 ` Guo, Junfeng
2022-09-05 10:58 ` [PATCH v2 11/14] net/idpf: add support for hw statistics Junfeng Guo
2022-09-05 10:58 ` [PATCH v2 12/14] net/idpf: add support for write back based on ITR expire Junfeng Guo
2022-09-05 10:58 ` [PATCH v2 13/14] net/idpf: add AVX512 data path for single queue model Junfeng Guo
2022-10-03 14:20 ` Andrew Rybchenko
2022-10-14 9:19 ` Guo, Junfeng
2022-10-10 8:06 ` Wu, Wenjun1
2022-09-05 10:58 ` [PATCH v2 14/14] net/idpf: add support for timestamp offload Junfeng Guo
2022-10-03 14:22 ` Andrew Rybchenko
2022-10-14 9:19 ` Guo, Junfeng
2022-10-10 7:56 ` Wu, Wenjun1
2022-10-03 13:31 ` [PATCH v2 00/14] add support for idpf PMD in DPDK Andrew Rybchenko
2022-10-03 14:36 ` Andrew Rybchenko
2022-10-18 11:09 ` Guo, Junfeng
2022-10-18 11:12 ` [PATCH v3 00/15] " Junfeng Guo
2022-10-18 11:12 ` [PATCH v3 01/15] common/idpf: introduce common library Junfeng Guo
2022-10-19 10:37 ` [PATCH v4 00/14] add support for idpf PMD in DPDK Junfeng Guo
2022-10-19 10:37 ` [PATCH v4 01/14] common/idpf: introduce common library Junfeng Guo
2022-10-19 11:03 ` [PATCH v5 00/14] add support for idpf PMD in DPDK Junfeng Guo
2022-10-19 11:03 ` [PATCH v5 01/14] common/idpf: introduce common library Junfeng Guo
2022-10-19 14:54 ` [PATCH v6 00/14] add support for idpf PMD in DPDK Junfeng Guo
2022-10-19 14:54 ` [PATCH v6 01/14] common/idpf: introduce common library Junfeng Guo
2022-10-20 2:41 ` [PATCH v7 00/14] add support for idpf PMD in DPDK Junfeng Guo
2022-10-20 2:41 ` [PATCH v7 01/14] common/idpf: introduce common library Junfeng Guo
2022-10-20 2:41 ` [PATCH v7 02/14] net/idpf: add support for device initialization Junfeng Guo
2022-10-20 2:41 ` [PATCH v7 03/14] net/idpf: add queue setup and release in single queue model Junfeng Guo
2022-10-20 2:41 ` [PATCH v7 04/14] net/idpf: add queue setup and release in split " Junfeng Guo
2022-10-20 2:41 ` [PATCH v7 05/14] net/idpf: add support for queue start and stop Junfeng Guo
2022-10-20 2:41 ` [PATCH v7 06/14] net/idpf: add support for device information get Junfeng Guo
2022-10-20 2:41 ` [PATCH v7 07/14] net/idpf: add support for packet type get Junfeng Guo
2022-10-20 2:41 ` [PATCH v7 08/14] net/idpf: add support for basic Rx/Tx datapath Junfeng Guo
2022-10-20 2:41 ` [PATCH v7 09/14] net/idpf: add support for Rx/Tx offloading Junfeng Guo
2022-10-20 2:41 ` [PATCH v7 10/14] net/idpf: add support for RSS Junfeng Guo
2022-10-20 2:41 ` [PATCH v7 11/14] net/idpf: add support for MTU configuration Junfeng Guo
2022-10-20 2:41 ` [PATCH v7 12/14] net/idpf: add support for write back based on ITR expire Junfeng Guo
2022-10-20 2:41 ` [PATCH v7 13/14] net/idpf: add AVX512 data path for single queue model Junfeng Guo
2022-10-20 2:41 ` [PATCH v7 14/14] net/idpf: add support for timestamp offload Junfeng Guo
2022-10-20 6:29 ` [PATCH v8 00/14] add support for idpf PMD in DPDK Junfeng Guo
2022-10-20 6:29 ` [PATCH v8 01/14] common/idpf: introduce common library Junfeng Guo
2022-10-21 5:18 ` [PATCH v9 00/14] add support for idpf PMD in DPDK Junfeng Guo
2022-10-21 5:18 ` [PATCH v9 01/14] common/idpf: introduce common library Junfeng Guo
2022-10-21 6:40 ` Andrew Rybchenko
2022-10-21 12:35 ` Xing, Beilei
2022-10-21 12:38 ` Andrew Rybchenko
2022-10-21 12:46 ` Zhang, Qi Z
2022-10-24 13:01 ` [PATCH v10 00/14] add support for idpf PMD in DPDK Junfeng Guo
2022-10-24 13:01 ` [PATCH v10 01/14] net/idpf: add support for device start and stop Junfeng Guo
2022-10-24 13:12 ` [PATCH v11 00/18] add support for idpf PMD in DPDK Junfeng Guo
2022-10-24 13:12 ` [PATCH v11 01/18] common/idpf: introduce common library Junfeng Guo
2022-10-26 10:10 ` [PATCH v12 00/18] add support for idpf PMD in DPDK Junfeng Guo
2022-10-26 10:10 ` [PATCH v12 01/18] common/idpf: introduce common library Junfeng Guo
2022-10-27 5:44 ` [PATCH v13 00/18] add support for idpf PMD in DPDK Junfeng Guo
2022-10-27 5:44 ` [PATCH v13 01/18] common/idpf: introduce common library Junfeng Guo
2022-10-27 7:47 ` [PATCH v14 00/18] add support for idpf PMD in DPDK Junfeng Guo
2022-10-27 7:47 ` [PATCH v14 01/18] common/idpf: introduce common library Junfeng Guo
2022-10-27 7:47 ` [PATCH v14 02/18] net/idpf: add support for device initialization Junfeng Guo
2022-10-28 15:35 ` Andrew Rybchenko
2022-10-28 17:22 ` Xing, Beilei [this message]
2022-10-27 7:47 ` [PATCH v14 03/18] net/idpf: add Tx queue setup Junfeng Guo
2022-10-27 7:47 ` [PATCH v14 04/18] net/idpf: add Rx " Junfeng Guo
2022-10-27 7:47 ` [PATCH v14 05/18] net/idpf: add support for device start and stop Junfeng Guo
2022-10-28 15:45 ` Andrew Rybchenko
2022-10-27 7:47 ` [PATCH v14 06/18] net/idpf: add support for queue start Junfeng Guo
2022-10-28 15:50 ` Andrew Rybchenko
2022-10-28 17:34 ` Xing, Beilei
2022-10-27 7:47 ` [PATCH v14 07/18] net/idpf: add support for queue stop Junfeng Guo
2022-10-27 7:47 ` [PATCH v14 08/18] net/idpf: add queue release Junfeng Guo
2022-10-27 7:47 ` [PATCH v14 09/18] net/idpf: add support for MTU configuration Junfeng Guo
2022-10-27 7:47 ` [PATCH v14 10/18] net/idpf: add support for basic Rx datapath Junfeng Guo
2022-10-27 7:47 ` [PATCH v14 11/18] net/idpf: add support for basic Tx datapath Junfeng Guo
2022-10-27 7:47 ` [PATCH v14 12/18] net/idpf: support parsing packet type Junfeng Guo
2022-10-27 7:47 ` [PATCH v14 13/18] net/idpf: add support for write back based on ITR expire Junfeng Guo
2022-10-27 7:47 ` [PATCH v14 14/18] net/idpf: add support for RSS Junfeng Guo
2022-10-27 7:47 ` [PATCH v14 15/18] net/idpf: add support for Rx offloading Junfeng Guo
2022-10-27 7:47 ` [PATCH v14 16/18] net/idpf: add support for Tx offloading Junfeng Guo
2022-10-27 7:47 ` [PATCH v14 17/18] net/idpf: add AVX512 data path for single queue model Junfeng Guo
2022-10-27 7:47 ` [PATCH v14 18/18] net/idpf: add support for timestamp offload Junfeng Guo
2022-10-29 3:27 ` [PATCH v15 00/18] add support for idpf PMD in DPDK beilei.xing
2022-10-29 3:27 ` [PATCH v15 01/18] common/idpf: introduce common library beilei.xing
2022-10-29 3:27 ` [PATCH v15 02/18] net/idpf: add support for device initialization beilei.xing
2022-10-29 3:27 ` [PATCH v15 03/18] net/idpf: add Tx queue setup beilei.xing
2022-10-29 3:27 ` [PATCH v15 04/18] net/idpf: add Rx " beilei.xing
2022-10-29 3:27 ` [PATCH v15 05/18] net/idpf: add support for device start and stop beilei.xing
2022-10-29 3:27 ` [PATCH v15 06/18] net/idpf: add support for queue start beilei.xing
2022-10-29 3:27 ` [PATCH v15 07/18] net/idpf: add support for queue stop beilei.xing
2022-10-29 3:27 ` [PATCH v15 08/18] net/idpf: add queue release beilei.xing
2022-10-29 3:27 ` [PATCH v15 09/18] net/idpf: add support for MTU configuration beilei.xing
2022-10-29 3:27 ` [PATCH v15 10/18] net/idpf: add support for basic Rx datapath beilei.xing
2022-10-29 3:27 ` [PATCH v15 11/18] net/idpf: add support for basic Tx datapath beilei.xing
2022-10-29 3:27 ` [PATCH v15 12/18] net/idpf: support parsing packet type beilei.xing
2022-10-29 3:27 ` [PATCH v15 13/18] net/idpf: add support for write back based on ITR expire beilei.xing
2022-10-29 3:27 ` [PATCH v15 14/18] net/idpf: add support for RSS beilei.xing
2022-10-29 3:27 ` [PATCH v15 15/18] net/idpf: add support for Rx offloading beilei.xing
2022-10-29 3:27 ` [PATCH v15 16/18] net/idpf: add support for Tx offloading beilei.xing
2022-10-29 3:27 ` [PATCH v15 17/18] net/idpf: add AVX512 data path for single queue model beilei.xing
2022-10-29 3:27 ` [PATCH v15 18/18] net/idpf: add support for timestamp offload beilei.xing
2022-10-29 14:48 ` [PATCH v15 00/18] add support for idpf PMD in DPDK Andrew Rybchenko
2022-10-31 2:26 ` Xing, Beilei
2022-10-31 3:36 ` [PATCH v16 " beilei.xing
2022-10-31 3:36 ` [PATCH v16 01/18] common/idpf: introduce common library beilei.xing
2022-10-31 3:36 ` [PATCH v16 02/18] net/idpf: add support for device initialization beilei.xing
2022-10-31 3:36 ` [PATCH v16 03/18] net/idpf: add Tx queue setup beilei.xing
2022-10-31 3:36 ` [PATCH v16 04/18] net/idpf: add Rx " beilei.xing
2022-10-31 3:36 ` [PATCH v16 05/18] net/idpf: add support for device start and stop beilei.xing
2022-10-31 3:36 ` [PATCH v16 06/18] net/idpf: add support for queue start beilei.xing
2022-10-31 3:36 ` [PATCH v16 07/18] net/idpf: add support for queue stop beilei.xing
2022-10-31 3:36 ` [PATCH v16 08/18] net/idpf: add queue release beilei.xing
2022-10-31 3:36 ` [PATCH v16 09/18] net/idpf: add support for MTU configuration beilei.xing
2022-10-31 3:36 ` [PATCH v16 10/18] net/idpf: add support for basic Rx datapath beilei.xing
2022-10-31 3:36 ` [PATCH v16 11/18] net/idpf: add support for basic Tx datapath beilei.xing
2022-10-31 3:36 ` [PATCH v16 12/18] net/idpf: support parsing packet type beilei.xing
2022-10-31 3:36 ` [PATCH v16 13/18] net/idpf: add support for write back based on ITR expire beilei.xing
2022-10-31 3:36 ` [PATCH v16 14/18] net/idpf: add support for RSS beilei.xing
2022-10-31 3:36 ` [PATCH v16 15/18] net/idpf: add support for Rx offloading beilei.xing
2022-10-31 3:36 ` [PATCH v16 16/18] net/idpf: add support for Tx offloading beilei.xing
2022-10-31 3:36 ` [PATCH v16 17/18] net/idpf: add AVX512 data path for single queue model beilei.xing
2022-10-31 3:36 ` [PATCH v16 18/18] net/idpf: add support for timestamp offload beilei.xing
2022-10-31 5:15 ` [PATCH v17 00/18] add support for idpf PMD in DPDK beilei.xing
2022-10-31 5:15 ` [PATCH v17 01/18] common/idpf: introduce common library beilei.xing
2022-10-31 5:15 ` [PATCH v17 02/18] net/idpf: add support for device initialization beilei.xing
2022-10-31 5:15 ` [PATCH v17 03/18] net/idpf: add Tx queue setup beilei.xing
2022-10-31 5:15 ` [PATCH v17 04/18] net/idpf: add Rx " beilei.xing
2022-10-31 5:15 ` [PATCH v17 05/18] net/idpf: add support for device start and stop beilei.xing
2022-10-31 5:15 ` [PATCH v17 06/18] net/idpf: add support for queue start beilei.xing
2022-10-31 5:15 ` [PATCH v17 07/18] net/idpf: add support for queue stop beilei.xing
2022-10-31 5:15 ` [PATCH v17 08/18] net/idpf: add queue release beilei.xing
2022-10-31 5:15 ` [PATCH v17 09/18] net/idpf: add support for MTU configuration beilei.xing
2022-10-31 5:15 ` [PATCH v17 10/18] net/idpf: add support for basic Rx datapath beilei.xing
2022-10-31 5:15 ` [PATCH v17 11/18] net/idpf: add support for basic Tx datapath beilei.xing
2022-10-31 5:15 ` [PATCH v17 12/18] net/idpf: support parsing packet type beilei.xing
2022-10-31 5:15 ` [PATCH v17 13/18] net/idpf: add support for write back based on ITR expire beilei.xing
2022-10-31 5:15 ` [PATCH v17 14/18] net/idpf: add support for RSS beilei.xing
2022-10-31 5:15 ` [PATCH v17 15/18] net/idpf: add support for Rx offloading beilei.xing
2022-10-31 5:15 ` [PATCH v17 16/18] net/idpf: add support for Tx offloading beilei.xing
2022-10-31 5:15 ` [PATCH v17 17/18] net/idpf: add AVX512 data path for single queue model beilei.xing
2022-10-31 5:15 ` [PATCH v17 18/18] net/idpf: add support for timestamp offload beilei.xing
2022-10-31 8:33 ` [PATCH v18 00/18] add support for idpf PMD in DPDK beilei.xing
2022-10-31 8:33 ` [PATCH v18 01/18] common/idpf: introduce common library beilei.xing
2022-10-31 8:33 ` [PATCH v18 02/18] net/idpf: add support for device initialization beilei.xing
2022-10-31 8:33 ` [PATCH v18 03/18] net/idpf: add Tx queue setup beilei.xing
2022-10-31 8:33 ` [PATCH v18 04/18] net/idpf: add Rx " beilei.xing
2022-10-31 8:33 ` [PATCH v18 05/18] net/idpf: add support for device start and stop beilei.xing
2022-10-31 8:33 ` [PATCH v18 06/18] net/idpf: add support for queue start beilei.xing
2022-10-31 8:33 ` [PATCH v18 07/18] net/idpf: add support for queue stop beilei.xing
2022-10-31 8:33 ` [PATCH v18 08/18] net/idpf: add queue release beilei.xing
2022-10-31 8:33 ` [PATCH v18 09/18] net/idpf: add support for MTU configuration beilei.xing
2022-10-31 8:33 ` [PATCH v18 10/18] net/idpf: add support for basic Rx datapath beilei.xing
2022-10-31 8:33 ` [PATCH v18 11/18] net/idpf: add support for basic Tx datapath beilei.xing
2022-10-31 8:33 ` [PATCH v18 12/18] net/idpf: support parsing packet type beilei.xing
2022-10-31 8:33 ` [PATCH v18 13/18] net/idpf: add support for write back based on ITR expire beilei.xing
2022-10-31 8:33 ` [PATCH v18 14/18] net/idpf: add support for RSS beilei.xing
2022-10-31 8:33 ` [PATCH v18 15/18] net/idpf: add support for Rx offloading beilei.xing
2022-10-31 8:33 ` [PATCH v18 16/18] net/idpf: add support for Tx offloading beilei.xing
2022-10-31 8:33 ` [PATCH v18 17/18] net/idpf: add AVX512 data path for single queue model beilei.xing
2022-10-31 8:33 ` [PATCH v18 18/18] net/idpf: add support for timestamp offload beilei.xing
2022-10-31 13:38 ` [PATCH v18 00/18] add support for idpf PMD in DPDK Thomas Monjalon
2022-10-27 5:44 ` [PATCH v13 02/18] net/idpf: add support for device initialization Junfeng Guo
2022-10-27 5:44 ` [PATCH v13 03/18] net/idpf: add Tx queue setup Junfeng Guo
2022-10-27 5:44 ` [PATCH v13 04/18] net/idpf: add Rx " Junfeng Guo
2022-10-27 5:44 ` [PATCH v13 05/18] net/idpf: add support for device start and stop Junfeng Guo
2022-10-27 5:44 ` [PATCH v13 06/18] net/idpf: add support for queue start Junfeng Guo
2022-10-27 5:44 ` [PATCH v13 07/18] net/idpf: add support for queue stop Junfeng Guo
2022-10-27 5:44 ` [PATCH v13 08/18] net/idpf: add queue release Junfeng Guo
2022-10-27 5:44 ` [PATCH v13 09/18] net/idpf: add support for MTU configuration Junfeng Guo
2022-10-27 5:44 ` [PATCH v13 10/18] net/idpf: add support for basic Rx datapath Junfeng Guo
2022-10-27 5:44 ` [PATCH v13 11/18] net/idpf: add support for basic Tx datapath Junfeng Guo
2022-10-27 5:44 ` [PATCH v13 12/18] net/idpf: support parsing packet type Junfeng Guo
2022-10-27 5:45 ` [PATCH v13 13/18] net/idpf: add support for write back based on ITR expire Junfeng Guo
2022-10-27 5:45 ` [PATCH v13 14/18] net/idpf: add support for RSS Junfeng Guo
2022-10-27 5:45 ` [PATCH v13 15/18] net/idpf: add support for Rx offloading Junfeng Guo
2022-10-27 5:45 ` [PATCH v13 16/18] net/idpf: add support for Tx offloading Junfeng Guo
2022-10-27 5:45 ` [PATCH v13 17/18] net/idpf: add AVX512 data path for single queue model Junfeng Guo
2022-10-27 5:45 ` [PATCH v13 18/18] net/idpf: add support for timestamp offload Junfeng Guo
2022-10-26 10:10 ` [PATCH v12 02/18] net/idpf: add support for device initialization Junfeng Guo
2022-10-26 10:10 ` [PATCH v12 03/18] net/idpf: add Tx queue setup Junfeng Guo
2022-10-26 10:10 ` [PATCH v12 04/18] net/idpf: add Rx " Junfeng Guo
2022-10-26 10:10 ` [PATCH v12 05/18] net/idpf: add support for device start and stop Junfeng Guo
2022-10-26 10:10 ` [PATCH v12 06/18] net/idpf: add support for queue start Junfeng Guo
2022-10-26 10:10 ` [PATCH v12 07/18] net/idpf: add support for queue stop Junfeng Guo
2022-10-26 10:10 ` [PATCH v12 08/18] net/idpf: add queue release Junfeng Guo
2022-10-26 10:10 ` [PATCH v12 09/18] net/idpf: add support for MTU configuration Junfeng Guo
2022-10-26 10:10 ` [PATCH v12 10/18] net/idpf: add support for basic Rx datapath Junfeng Guo
2022-10-26 10:10 ` [PATCH v12 11/18] net/idpf: add support for basic Tx datapath Junfeng Guo
2022-10-26 10:10 ` [PATCH v12 12/18] net/idpf: support packet type get Junfeng Guo
2022-10-26 10:10 ` [PATCH v12 13/18] net/idpf: add support for write back based on ITR expire Junfeng Guo
2022-10-26 10:10 ` [PATCH v12 14/18] net/idpf: add support for RSS Junfeng Guo
2022-10-26 10:10 ` [PATCH v12 15/18] net/idpf: add support for Rx offloading Junfeng Guo
2022-10-26 10:10 ` [PATCH v12 16/18] net/idpf: add support for Tx offloading Junfeng Guo
2022-10-26 10:10 ` [PATCH v12 17/18] net/idpf: add AVX512 data path for single queue model Junfeng Guo
2022-10-26 10:10 ` [PATCH v12 18/18] net/idpf: add support for timestamp offload Junfeng Guo
2022-10-24 13:12 ` [PATCH v11 02/18] net/idpf: add support for device initialization Junfeng Guo
2022-10-25 8:57 ` Andrew Rybchenko
2022-10-26 8:28 ` Xing, Beilei
2022-10-28 15:14 ` Andrew Rybchenko
2022-10-28 17:19 ` Xing, Beilei
2022-10-24 13:12 ` [PATCH v11 03/18] net/idpf: add Tx queue setup Junfeng Guo
2022-10-25 9:40 ` Andrew Rybchenko
2022-10-26 8:34 ` Xing, Beilei
2022-10-24 13:12 ` [PATCH v11 04/18] net/idpf: add Rx " Junfeng Guo
2022-10-24 13:12 ` [PATCH v11 05/18] net/idpf: add support for device start and stop Junfeng Guo
2022-10-25 9:49 ` Andrew Rybchenko
2022-10-26 8:38 ` Xing, Beilei
2022-10-24 13:12 ` [PATCH v11 06/18] net/idpf: add support for queue start Junfeng Guo
2022-10-24 13:12 ` [PATCH v11 07/18] net/idpf: add support for queue stop Junfeng Guo
2022-10-24 13:12 ` [PATCH v11 08/18] net/idpf: add queue release Junfeng Guo
2022-10-24 13:12 ` [PATCH v11 09/18] net/idpf: add support for packet type get Junfeng Guo
2022-10-25 9:57 ` Andrew Rybchenko
2022-10-24 13:12 ` [PATCH v11 10/18] net/idpf: add support for MTU configuration Junfeng Guo
2022-10-24 13:12 ` [PATCH v11 11/18] net/idpf: add support for basic Rx datapath Junfeng Guo
2022-10-24 13:12 ` [PATCH v11 12/18] net/idpf: add support for basic Tx datapath Junfeng Guo
2022-10-25 10:12 ` Andrew Rybchenko
2022-10-24 13:12 ` [PATCH v11 13/18] net/idpf: add support for write back based on ITR expire Junfeng Guo
2022-10-24 13:12 ` [PATCH v11 14/18] net/idpf: add support for RSS Junfeng Guo
2022-10-24 13:12 ` [PATCH v11 15/18] net/idpf: add support for Rx offloading Junfeng Guo
2022-10-25 10:03 ` Andrew Rybchenko
2022-10-28 1:48 ` Xing, Beilei
2022-10-24 13:12 ` [PATCH v11 16/18] net/idpf: add support for Tx offloading Junfeng Guo
2022-10-25 10:14 ` Andrew Rybchenko
2022-10-24 13:12 ` [PATCH v11 17/18] net/idpf: add AVX512 data path for single queue model Junfeng Guo
2022-10-24 13:12 ` [PATCH v11 18/18] net/idpf: add support for timestamp offload Junfeng Guo
2022-10-24 13:01 ` [PATCH v10 02/14] net/idpf: add support for queue start Junfeng Guo
2022-10-24 13:01 ` [PATCH v10 03/14] net/idpf: add support for queue stop Junfeng Guo
2022-10-24 13:01 ` [PATCH v10 04/14] net/idpf: add queue release Junfeng Guo
2022-10-24 13:01 ` [PATCH v10 05/14] net/idpf: add support for packet type get Junfeng Guo
2022-10-24 13:01 ` [PATCH v10 06/14] net/idpf: add support for MTU configuration Junfeng Guo
2022-10-24 13:01 ` [PATCH v10 07/14] net/idpf: add support for basic Rx datapath Junfeng Guo
2022-10-24 13:01 ` [PATCH v10 08/14] net/idpf: add support for basic Tx datapath Junfeng Guo
2022-10-24 13:01 ` [PATCH v10 09/14] net/idpf: add support for write back based on ITR expire Junfeng Guo
2022-10-24 13:01 ` [PATCH v10 10/14] net/idpf: add support for RSS Junfeng Guo
2022-10-24 13:01 ` [PATCH v10 11/14] net/idpf: add support for Rx offloading Junfeng Guo
2022-10-24 13:01 ` [PATCH v10 12/14] net/idpf: add support for Tx offloading Junfeng Guo
2022-10-24 13:01 ` [PATCH v10 13/14] net/idpf: add AVX512 data path for single queue model Junfeng Guo
2022-10-24 13:01 ` [PATCH v10 14/14] net/idpf: add support for timestamp offload Junfeng Guo
2022-10-21 5:18 ` [PATCH v9 02/14] net/idpf: add support for device initialization Junfeng Guo
2022-10-21 7:39 ` Andrew Rybchenko
2022-10-21 7:48 ` Andrew Rybchenko
2022-10-21 12:41 ` Zhang, Qi Z
2022-10-25 7:52 ` Andrew Rybchenko
2022-10-21 5:18 ` [PATCH v9 03/14] net/idpf: add queue setup and release in single queue model Junfeng Guo
2022-10-21 7:44 ` Andrew Rybchenko
2022-10-21 5:18 ` [PATCH v9 04/14] net/idpf: add queue setup and release in split " Junfeng Guo
2022-10-21 5:18 ` [PATCH v9 05/14] net/idpf: add support for queue start and stop Junfeng Guo
2022-10-21 7:53 ` Andrew Rybchenko
2022-10-21 5:18 ` [PATCH v9 06/14] net/idpf: add support for device information get Junfeng Guo
2022-10-21 7:56 ` Andrew Rybchenko
2022-10-21 5:18 ` [PATCH v9 07/14] net/idpf: add support for packet type get Junfeng Guo
2022-10-21 8:00 ` Andrew Rybchenko
2022-10-21 5:18 ` [PATCH v9 08/14] net/idpf: add support for basic Rx/Tx datapath Junfeng Guo
2022-10-21 5:18 ` [PATCH v9 09/14] net/idpf: add support for Rx/Tx offloading Junfeng Guo
2022-10-21 8:29 ` Andrew Rybchenko
2022-10-24 13:26 ` Xing, Beilei
2022-10-21 5:18 ` [PATCH v9 10/14] net/idpf: add support for RSS Junfeng Guo
2022-10-21 8:38 ` Andrew Rybchenko
2022-10-21 5:18 ` [PATCH v9 11/14] net/idpf: add support for MTU configuration Junfeng Guo
2022-10-21 5:18 ` [PATCH v9 12/14] net/idpf: add support for write back based on ITR expire Junfeng Guo
2022-10-21 5:18 ` [PATCH v9 13/14] net/idpf: add AVX512 data path for single queue model Junfeng Guo
2022-10-21 5:18 ` [PATCH v9 14/14] net/idpf: add support for timestamp offload Junfeng Guo
2022-10-20 6:29 ` [PATCH v8 02/14] net/idpf: add support for device initialization Junfeng Guo
2022-10-20 6:29 ` [PATCH v8 03/14] net/idpf: add queue setup and release in single queue model Junfeng Guo
2022-10-20 6:29 ` [PATCH v8 04/14] net/idpf: add queue setup and release in split " Junfeng Guo
2022-10-20 6:29 ` [PATCH v8 05/14] net/idpf: add support for queue start and stop Junfeng Guo
2022-10-20 6:29 ` [PATCH v8 06/14] net/idpf: add support for device information get Junfeng Guo
2022-10-20 6:29 ` [PATCH v8 07/14] net/idpf: add support for packet type get Junfeng Guo
2022-10-20 6:29 ` [PATCH v8 08/14] net/idpf: add support for basic Rx/Tx datapath Junfeng Guo
2022-10-20 6:29 ` [PATCH v8 09/14] net/idpf: add support for Rx/Tx offloading Junfeng Guo
2022-10-20 6:29 ` [PATCH v8 10/14] net/idpf: add support for RSS Junfeng Guo
2022-10-20 6:29 ` [PATCH v8 11/14] net/idpf: add support for MTU configuration Junfeng Guo
2022-10-20 6:29 ` [PATCH v8 12/14] net/idpf: add support for write back based on ITR expire Junfeng Guo
2022-10-20 6:29 ` [PATCH v8 13/14] net/idpf: add AVX512 data path for single queue model Junfeng Guo
2022-10-20 6:29 ` [PATCH v8 14/14] net/idpf: add support for timestamp offload Junfeng Guo
2022-10-19 14:54 ` [PATCH v6 02/14] net/idpf: add support for device initialization Junfeng Guo
2022-10-19 14:54 ` [PATCH v6 03/14] net/idpf: add queue setup and release in single queue model Junfeng Guo
2022-10-19 14:54 ` [PATCH v6 04/14] net/idpf: add queue setup and release in split " Junfeng Guo
2022-10-19 14:54 ` [PATCH v6 05/14] net/idpf: add support for queue start and stop Junfeng Guo
2022-10-19 14:54 ` [PATCH v6 06/14] net/idpf: add support for device information get Junfeng Guo
2022-10-19 14:54 ` [PATCH v6 07/14] net/idpf: add support for packet type get Junfeng Guo
2022-10-19 14:54 ` [PATCH v6 08/14] net/idpf: add support for basic Rx/Tx datapath Junfeng Guo
2022-10-19 14:54 ` [PATCH v6 09/14] net/idpf: add support for Rx/Tx offloading Junfeng Guo
2022-10-19 14:54 ` [PATCH v6 10/14] net/idpf: add support for RSS Junfeng Guo
2022-10-19 14:54 ` [PATCH v6 11/14] net/idpf: add support for MTU configuration Junfeng Guo
2022-10-19 14:54 ` [PATCH v6 12/14] net/idpf: add support for write back based on ITR expire Junfeng Guo
2022-10-19 14:54 ` [PATCH v6 13/14] net/idpf: add AVX512 data path for single queue model Junfeng Guo
2022-10-19 14:54 ` [PATCH v6 14/14] net/idpf: add support for timestamp offload Junfeng Guo
2022-10-19 11:03 ` [PATCH v5 02/14] net/idpf: add support for device initialization Junfeng Guo
2022-10-19 11:03 ` [PATCH v5 03/14] net/idpf: add queue setup and release in single queue model Junfeng Guo
2022-10-19 11:03 ` [PATCH v5 04/14] net/idpf: add queue setup and release in split " Junfeng Guo
2022-10-19 11:03 ` [PATCH v5 05/14] net/idpf: add support for queue start and stop Junfeng Guo
2022-10-19 11:03 ` [PATCH v5 06/14] net/idpf: add support for device information get Junfeng Guo
2022-10-19 11:03 ` [PATCH v5 07/14] net/idpf: add support for packet type get Junfeng Guo
2022-10-19 11:03 ` [PATCH v5 08/14] net/idpf: add support for basic Rx/Tx datapath Junfeng Guo
2022-10-19 11:03 ` [PATCH v5 09/14] net/idpf: add support for Rx/Tx offloading Junfeng Guo
2022-10-19 11:03 ` [PATCH v5 10/14] net/idpf: add support for RSS Junfeng Guo
2022-10-19 11:03 ` [PATCH v5 11/14] net/idpf: add support for MTU configuration Junfeng Guo
2022-10-19 11:03 ` [PATCH v5 12/14] net/idpf: add support for write back based on ITR expire Junfeng Guo
2022-10-19 11:03 ` [PATCH v5 13/14] net/idpf: add AVX512 data path for single queue model Junfeng Guo
2022-10-19 11:03 ` [PATCH v5 14/14] net/idpf: add support for timestamp offload Junfeng Guo
2022-10-19 10:37 ` [PATCH v4 02/14] net/idpf: add support for device initialization Junfeng Guo
2022-10-19 10:37 ` [PATCH v4 03/14] net/idpf: add queue setup and release in single queue model Junfeng Guo
2022-10-19 10:37 ` [PATCH v4 04/14] net/idpf: add queue setup and release in split " Junfeng Guo
2022-10-19 10:37 ` [PATCH v4 05/14] net/idpf: add support for queue start and stop Junfeng Guo
2022-10-19 10:37 ` [PATCH v4 06/14] net/idpf: add support for device information get Junfeng Guo
2022-10-19 10:37 ` [PATCH v4 07/14] net/idpf: add support for packet type get Junfeng Guo
2022-10-19 10:37 ` [PATCH v4 08/14] net/idpf: add support for basic Rx/Tx datapath Junfeng Guo
2022-10-19 10:37 ` [PATCH v4 09/14] net/idpf: add support for Rx/Tx offloading Junfeng Guo
2022-10-19 10:37 ` [PATCH v4 10/14] net/idpf: add support for RSS Junfeng Guo
2022-10-19 10:37 ` [PATCH v4 11/14] net/idpf: add support for MTU configuration Junfeng Guo
2022-10-19 10:37 ` [PATCH v4 12/14] net/idpf: add support for write back based on ITR expire Junfeng Guo
2022-10-19 10:37 ` [PATCH v4 13/14] net/idpf: add AVX512 data path for single queue model Junfeng Guo
2022-10-19 10:37 ` [PATCH v4 14/14] net/idpf: add support for timestamp offload Junfeng Guo
2022-10-18 11:12 ` [PATCH v3 02/15] net/idpf: add support for device initialization Junfeng Guo
2022-10-18 11:12 ` [PATCH v3 03/15] net/idpf: add queue setup and release in single queue model Junfeng Guo
2022-10-18 11:12 ` [PATCH v3 04/15] net/idpf: add queue setup and release in split " Junfeng Guo
2022-10-18 11:12 ` [PATCH v3 05/15] net/idpf: add support for queue start and stop Junfeng Guo
2022-10-18 11:12 ` [PATCH v3 06/15] net/idpf: add support for device information get Junfeng Guo
2022-10-18 11:12 ` [PATCH v3 07/15] net/idpf: add support for packet type get Junfeng Guo
2022-10-18 11:12 ` [PATCH v3 08/15] net/idpf: add support for link status update Junfeng Guo
2022-10-18 11:12 ` [PATCH v3 09/15] net/idpf: add support for basic Rx/Tx datapath Junfeng Guo
2022-10-18 11:12 ` [PATCH v3 10/15] net/idpf: add support for Rx/Tx offloading Junfeng Guo
2022-10-18 11:12 ` [PATCH v3 11/15] net/idpf: add support for RSS Junfeng Guo
2022-10-18 11:12 ` [PATCH v3 12/15] net/idpf: add support for MTU configuration Junfeng Guo
2022-10-18 11:12 ` [PATCH v3 13/15] net/idpf: add support for write back based on ITR expire Junfeng Guo
2022-10-18 11:12 ` [PATCH v3 14/15] net/idpf: add AVX512 data path for single queue model Junfeng Guo
2022-10-18 11:12 ` [PATCH v3 15/15] net/idpf: add support for timestamp offload Junfeng Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=LV2PR11MB59974F35636A08BFBFD2F99BF7329@LV2PR11MB5997.namprd11.prod.outlook.com \
--to=beilei.xing@intel.com \
--cc=andrew.rybchenko@oktetlabs.ru \
--cc=dev@dpdk.org \
--cc=jingjing.wu@intel.com \
--cc=junfeng.guo@intel.com \
--cc=qi.z.zhang@intel.com \
--cc=wenjun1.wu@intel.com \
--cc=xiao.w.wang@intel.com \
--cc=xiaoyun.li@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).