From: "Xia, Chenbo" <chenbo.xia@intel.com>
To: Maxime Coquelin <maxime.coquelin@redhat.com>,
"dev@dpdk.org" <dev@dpdk.org>,
"amorenoz@redhat.com" <amorenoz@redhat.com>,
"david.marchand@redhat.com" <david.marchand@redhat.com>
Subject: Re: [dpdk-dev] [PATCH 2/3] net/virtio: add device config support to vDPA
Date: Wed, 16 Jun 2021 12:26:05 +0000 [thread overview]
Message-ID: <MN2PR11MB40635E0CBAB1FF5255811DCC9C0F9@MN2PR11MB4063.namprd11.prod.outlook.com> (raw)
In-Reply-To: <20210608141405.52917-3-maxime.coquelin@redhat.com>
Hi Maxime,
> -----Original Message-----
> From: Maxime Coquelin <maxime.coquelin@redhat.com>
> Sent: Tuesday, June 8, 2021 10:14 PM
> To: dev@dpdk.org; Xia, Chenbo <chenbo.xia@intel.com>; amorenoz@redhat.com;
> david.marchand@redhat.com
> Cc: Maxime Coquelin <maxime.coquelin@redhat.com>
> Subject: [PATCH 2/3] net/virtio: add device config support to vDPA
>
> This patch introduces two virtio-user callbacks to get
> and set device's config, and implements it for vDPA
> backends.
>
> Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
> ---
> drivers/net/virtio/virtio_user/vhost.h | 3 +
> drivers/net/virtio/virtio_user/vhost_vdpa.c | 69 +++++++++++++++++++++
> 2 files changed, 72 insertions(+)
>
> diff --git a/drivers/net/virtio/virtio_user/vhost.h
> b/drivers/net/virtio/virtio_user/vhost.h
> index c49e88036d..dfbf6be033 100644
> --- a/drivers/net/virtio/virtio_user/vhost.h
> +++ b/drivers/net/virtio/virtio_user/vhost.h
> @@ -79,6 +79,9 @@ struct virtio_user_backend_ops {
> int (*set_vring_addr)(struct virtio_user_dev *dev, struct
> vhost_vring_addr *addr);
> int (*get_status)(struct virtio_user_dev *dev, uint8_t *status);
> int (*set_status)(struct virtio_user_dev *dev, uint8_t status);
> + int (*get_config)(struct virtio_user_dev *dev, uint8_t *data, uint32_t
> off, uint32_t len);
> + int (*set_config)(struct virtio_user_dev *dev, const uint8_t *data,
> uint32_t off,
> + uint32_t len);
> int (*enable_qp)(struct virtio_user_dev *dev, uint16_t pair_idx, int
> enable);
> int (*dma_map)(struct virtio_user_dev *dev, void *addr, uint64_t iova,
> size_t len);
> int (*dma_unmap)(struct virtio_user_dev *dev, void *addr, uint64_t iova,
> size_t len);
> diff --git a/drivers/net/virtio/virtio_user/vhost_vdpa.c
> b/drivers/net/virtio/virtio_user/vhost_vdpa.c
> index e2d6d3504d..59bc712d48 100644
> --- a/drivers/net/virtio/virtio_user/vhost_vdpa.c
> +++ b/drivers/net/virtio/virtio_user/vhost_vdpa.c
> @@ -41,6 +41,8 @@ struct vhost_vdpa_data {
> #define VHOST_VDPA_GET_DEVICE_ID _IOR(VHOST_VIRTIO, 0x70, __u32)
> #define VHOST_VDPA_GET_STATUS _IOR(VHOST_VIRTIO, 0x71, __u8)
> #define VHOST_VDPA_SET_STATUS _IOW(VHOST_VIRTIO, 0x72, __u8)
> +#define VHOST_VDPA_GET_CONFIG _IOR(VHOST_VIRTIO, 0x73, struct
> vhost_vdpa_config)
> +#define VHOST_VDPA_SET_CONFIG _IOW(VHOST_VIRTIO, 0x74, struct
> vhost_vdpa_config)
> #define VHOST_VDPA_SET_VRING_ENABLE _IOW(VHOST_VIRTIO, 0x75, struct
> vhost_vring_state)
> #define VHOST_SET_BACKEND_FEATURES _IOW(VHOST_VIRTIO, 0x25, __u64)
> #define VHOST_GET_BACKEND_FEATURES _IOR(VHOST_VIRTIO, 0x26, __u64)
> @@ -65,6 +67,12 @@ struct vhost_iotlb_msg {
>
> #define VHOST_IOTLB_MSG_V2 0x2
>
> +struct vhost_vdpa_config {
> + uint32_t off;
> + uint32_t len;
> + uint8_t buf[0];
> +};
> +
> struct vhost_msg {
> uint32_t type;
> uint32_t reserved;
> @@ -440,6 +448,65 @@ vhost_vdpa_set_status(struct virtio_user_dev *dev,
> uint8_t status)
> return vhost_vdpa_ioctl(data->vhostfd, VHOST_VDPA_SET_STATUS, &status);
> }
>
> +static int
> +vhost_vdpa_get_config(struct virtio_user_dev *dev, uint8_t *data, uint32_t
> off, uint32_t len)
> +{
> + struct vhost_vdpa_data *vdpa_data = dev->backend_data;
> + struct vhost_vdpa_config *config;
> + int ret = 0;
> +
> + config = malloc(sizeof(*config) + len);
> + if (!config) {
> + PMD_DRV_LOG(ERR, "Failed to allocate vDPA config data\n");
No need to add '\n'. And same for below three 'PMD_DRV_LOG'
> + return -1;
> + }
> +
> + config->off = off;
> + config->len = len;
> +
> + ret = vhost_vdpa_ioctl(vdpa_data->vhostfd, VHOST_VDPA_GET_CONFIG,
> config);
> + if (ret) {
> + PMD_DRV_LOG(ERR, "Failed to get vDPA config (offset %x, len %x)\n",
Better add '0x' here as it will be friendly to user 😊
> off, len);
> + ret = -1;
> + goto out;
> + }
> +
> + memcpy(data, config->buf, len);
> +out:
> + free(config);
> +
> + return ret;
> +}
> +
> +static int
> +vhost_vdpa_set_config(struct virtio_user_dev *dev, const uint8_t *data,
> uint32_t off, uint32_t len)
> +{
> + struct vhost_vdpa_data *vdpa_data = dev->backend_data;
> + struct vhost_vdpa_config *config;
> + int ret = 0;
> +
> + config = malloc(sizeof(*config) + len);
> + if (!config) {
> + PMD_DRV_LOG(ERR, "Failed to allocate vDPA config data\n");
> + return -1;
> + }
> +
> + config->off = off;
> + config->len = len;
> +
> + memcpy(config->buf, data, len);
> +
> + ret = vhost_vdpa_ioctl(vdpa_data->vhostfd, VHOST_VDPA_SET_CONFIG,
> config);
> + if (ret) {
> + PMD_DRV_LOG(ERR, "Failed to set vDPA config (offset %x, len %x)\n",
> off, len);
Ditto
Thanks,
Chenbo
> + ret = -1;
> + }
> +
> + free(config);
> +
> + return ret;
> +}
> +
> /**
> * Set up environment to talk with a vhost vdpa backend.
> *
> @@ -559,6 +626,8 @@ struct virtio_user_backend_ops virtio_ops_vdpa = {
> .set_vring_addr = vhost_vdpa_set_vring_addr,
> .get_status = vhost_vdpa_get_status,
> .set_status = vhost_vdpa_set_status,
> + .get_config = vhost_vdpa_get_config,
> + .set_config = vhost_vdpa_set_config,
> .enable_qp = vhost_vdpa_enable_queue_pair,
> .dma_map = vhost_vdpa_dma_map_batch,
> .dma_unmap = vhost_vdpa_dma_unmap_batch,
> --
> 2.31.1
next prev parent reply other threads:[~2021-06-16 12:26 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-08 14:14 [dpdk-dev] [PATCH 0/3] net/virtio: add vdpa device config support Maxime Coquelin
2021-06-08 14:14 ` [dpdk-dev] [PATCH 1/3] net/virtio: keep device and frontend features separated Maxime Coquelin
2021-06-16 12:25 ` Xia, Chenbo
2021-06-08 14:14 ` [dpdk-dev] [PATCH 2/3] net/virtio: add device config support to vDPA Maxime Coquelin
2021-06-16 12:26 ` Xia, Chenbo [this message]
2021-06-17 12:59 ` Maxime Coquelin
2021-06-08 14:14 ` [dpdk-dev] [PATCH 3/3] net/virtio: add MAC device config getter and setter Maxime Coquelin
2021-06-16 12:27 ` Xia, Chenbo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=MN2PR11MB40635E0CBAB1FF5255811DCC9C0F9@MN2PR11MB4063.namprd11.prod.outlook.com \
--to=chenbo.xia@intel.com \
--cc=amorenoz@redhat.com \
--cc=david.marchand@redhat.com \
--cc=dev@dpdk.org \
--cc=maxime.coquelin@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).