From: "Loftus, Ciara" <ciara.loftus@intel.com>
To: "Tahhan, Maryam" <mtahhan@redhat.com>,
"ferruh.yigit@amd.com" <ferruh.yigit@amd.com>,
"stephen@networkplumber.org" <stephen@networkplumber.org>,
"lihuisong@huawei.com" <lihuisong@huawei.com>,
"fengchengwen@huawei.com" <fengchengwen@huawei.com>,
"liuyonglong@huawei.com" <liuyonglong@huawei.com>,
"Koikkara Reeny, Shibin" <shibin.koikkara.reeny@intel.com>
Cc: "dev@dpdk.org" <dev@dpdk.org>, "Tahhan, Maryam" <mtahhan@redhat.com>
Subject: RE: [v4] net/af_xdp: enable uds_path instead of use_cni
Date: Fri, 15 Dec 2023 09:55:44 +0000 [thread overview]
Message-ID: <MW4PR11MB587215552A95C068FE63D32D8E93A@MW4PR11MB5872.namprd11.prod.outlook.com> (raw)
In-Reply-To: <20231213122433.810285-1-mtahhan@redhat.com>
Thanks for the latest patch Maryam. I have one minor suggestion inline.
Also, there are still some references to "use_cni" in af_xdp.rst which should be removed/replaced with uds_path.
Once that's done I think the patch should be good to go. Perhaps also consider adding a note to the release notes mentioning the new functionality.
Thanks,
Ciara
>
> With the original 'use_cni' implementation, (using a
> hardcoded socket rather than a configurable one),
> if a DPDK pod is requesting multiple net devices
> and these devices are from different pools, then
> the container attempts to mount all the netdev UDSes
> in the pod as /tmp/afxdp.sock. Which means that at best
> only 1 netdev will handshake correctly with the AF_XDP
> DP. This patch addresses this by making the socket
> parameter configurable using a new vdev param called
> 'uds_path' and removing the previous 'use_cni' param.
> This patch also fixes incorrect references to the
> AF_XDP DP as CNI and updates the documentation with a
> working example. This change has been tested with the
> AF_XDP DP PR 81, with both single and multiple interfaces.
>
> v4:
> * Rename af_xdp_cni.rst to af_xdp_dp.rst
> * Removed all incorrect references to CNI throughout af_xdp
> PMD file.
> * Fixed Typos in af_xdp_dp.rst
>
> v3:
> * Remove `use_cni` vdev argument as it's no longer needed.
> * Update incorrect CNI references for the AF_XDP DP in the
> documentation.
> * Update the documentation to run a simple example with the
> AF_XDP DP plugin in K8s.
>
> v2:
> * Rename sock_path to uds_path.
> * Update documentation to reflect when CAP_BPF is needed.
> * Fix testpmd arguments in the provided example for Pods.
> * Use AF_XDP API to update the xskmap entry.
>
> Signed-off-by: Maryam Tahhan <mtahhan@redhat.com>
> ---
> doc/guides/howto/af_xdp_cni.rst | 253 -------------------------
> doc/guides/howto/af_xdp_dp.rst | 278
> ++++++++++++++++++++++++++++
> doc/guides/howto/index.rst | 2 +-
> drivers/net/af_xdp/rte_eth_af_xdp.c | 100 +++++-----
> 4 files changed, 328 insertions(+), 305 deletions(-)
> delete mode 100644 doc/guides/howto/af_xdp_cni.rst
> create mode 100644 doc/guides/howto/af_xdp_dp.rst
>
<snip>
> diff --git a/drivers/net/af_xdp/rte_eth_af_xdp.c
> b/drivers/net/af_xdp/rte_eth_af_xdp.c
> index 353c8688ec..6caad58e60 100644
> --- a/drivers/net/af_xdp/rte_eth_af_xdp.c
> +++ b/drivers/net/af_xdp/rte_eth_af_xdp.c
> @@ -88,7 +88,6 @@ RTE_LOG_REGISTER_DEFAULT(af_xdp_logtype, NOTICE);
> #define UDS_MAX_CMD_LEN 64
> #define UDS_MAX_CMD_RESP 128
> #define UDS_XSK_MAP_FD_MSG "/xsk_map_fd"
> -#define UDS_SOCK "/tmp/afxdp.sock"
> #define UDS_CONNECT_MSG "/connect"
> #define UDS_HOST_OK_MSG "/host_ok"
> #define UDS_HOST_NAK_MSG "/host_nak"
> @@ -170,7 +169,7 @@ struct pmd_internals {
> char prog_path[PATH_MAX];
> bool custom_prog_configured;
> bool force_copy;
> - bool use_cni;
> + char uds_path[PATH_MAX];
> struct bpf_map *map;
>
> struct rte_ether_addr eth_addr;
> @@ -190,7 +189,7 @@ struct pmd_process_private {
> #define ETH_AF_XDP_PROG_ARG "xdp_prog"
> #define ETH_AF_XDP_BUDGET_ARG "busy_budget"
> #define ETH_AF_XDP_FORCE_COPY_ARG "force_copy"
> -#define ETH_AF_XDP_USE_CNI_ARG "use_cni"
> +#define ETH_AF_XDP_USE_DP_UDS_PATH_ARG "uds_path"
Use the same alignment for "uds_path" as the strings above it.
>
> static const char * const valid_arguments[] = {
> ETH_AF_XDP_IFACE_ARG,
> @@ -200,7 +199,7 @@ static const char * const valid_arguments[] = {
> ETH_AF_XDP_PROG_ARG,
> ETH_AF_XDP_BUDGET_ARG,
> ETH_AF_XDP_FORCE_COPY_ARG,
> - ETH_AF_XDP_USE_CNI_ARG,
> + ETH_AF_XDP_USE_DP_UDS_PATH_ARG,
> NULL
> };
>
> @@ -1351,7 +1350,7 @@ configure_preferred_busy_poll(struct
> pkt_rx_queue *rxq)
> }
>
> static int
> -init_uds_sock(struct sockaddr_un *server)
> +init_uds_sock(struct sockaddr_un *server, const char *uds_path)
> {
> int sock;
>
> @@ -1362,7 +1361,7 @@ init_uds_sock(struct sockaddr_un *server)
> }
>
> server->sun_family = AF_UNIX;
> - strlcpy(server->sun_path, UDS_SOCK, sizeof(server->sun_path));
> + strlcpy(server->sun_path, uds_path, sizeof(server->sun_path));
>
> if (connect(sock, (struct sockaddr *)server, sizeof(struct
> sockaddr_un)) < 0) {
> close(sock);
> @@ -1382,7 +1381,7 @@ struct msg_internal {
> };
>
> static int
> -send_msg(int sock, char *request, int *fd)
> +send_msg(int sock, char *request, int *fd, const char *uds_path)
> {
> int snd;
> struct iovec iov;
> @@ -1393,7 +1392,7 @@ send_msg(int sock, char *request, int *fd)
>
> memset(&dst, 0, sizeof(dst));
> dst.sun_family = AF_UNIX;
> - strlcpy(dst.sun_path, UDS_SOCK, sizeof(dst.sun_path));
> + strlcpy(dst.sun_path, uds_path, sizeof(dst.sun_path));
>
> /* Initialize message header structure */
> memset(&msgh, 0, sizeof(msgh));
> @@ -1470,8 +1469,8 @@ read_msg(int sock, char *response, struct
> sockaddr_un *s, int *fd)
> }
>
> static int
> -make_request_cni(int sock, struct sockaddr_un *server, char *request,
> - int *req_fd, char *response, int *out_fd)
> +make_request_dp(int sock, struct sockaddr_un *server, char *request,
> + int *req_fd, char *response, int *out_fd, const char
> *uds_path)
> {
> int rval;
>
> @@ -1483,7 +1482,7 @@ make_request_cni(int sock, struct sockaddr_un
> *server, char *request,
> if (req_fd == NULL)
> rval = write(sock, request, strlen(request));
> else
> - rval = send_msg(sock, request, req_fd);
> + rval = send_msg(sock, request, req_fd, uds_path);
>
> if (rval < 0) {
> AF_XDP_LOG(ERR, "Write error %s\n", strerror(errno));
> @@ -1507,7 +1506,7 @@ check_response(char *response, char *exp_resp,
> long size)
> }
>
> static int
> -get_cni_fd(char *if_name)
> +get_xskmap_fd(char *if_name, const char *uds_path)
> {
> char request[UDS_MAX_CMD_LEN],
> response[UDS_MAX_CMD_RESP];
> char hostname[MAX_LONG_OPT_SZ],
> exp_resp[UDS_MAX_CMD_RESP];
> @@ -1520,14 +1519,14 @@ get_cni_fd(char *if_name)
> return -1;
>
> memset(&server, 0, sizeof(server));
> - sock = init_uds_sock(&server);
> + sock = init_uds_sock(&server, uds_path);
> if (sock < 0)
> return -1;
>
> - /* Initiates handshake to CNI send: /connect,hostname */
> + /* Initiates handshake to AF_XDP Device Plugin send:
> /connect,hostname */
> snprintf(request, sizeof(request), "%s,%s", UDS_CONNECT_MSG,
> hostname);
> memset(response, 0, sizeof(response));
> - if (make_request_cni(sock, &server, request, NULL, response,
> &out_fd) < 0) {
> + if (make_request_dp(sock, &server, request, NULL, response,
> &out_fd, uds_path) < 0) {
> AF_XDP_LOG(ERR, "Error in processing cmd [%s]\n", request);
> goto err_close;
> }
> @@ -1541,7 +1540,7 @@ get_cni_fd(char *if_name)
> /* Request for "/version" */
> strlcpy(request, UDS_VERSION_MSG, UDS_MAX_CMD_LEN);
> memset(response, 0, sizeof(response));
> - if (make_request_cni(sock, &server, request, NULL, response,
> &out_fd) < 0) {
> + if (make_request_dp(sock, &server, request, NULL, response,
> &out_fd, uds_path) < 0) {
> AF_XDP_LOG(ERR, "Error in processing cmd [%s]\n", request);
> goto err_close;
> }
> @@ -1549,7 +1548,7 @@ get_cni_fd(char *if_name)
> /* Request for file descriptor for netdev name*/
> snprintf(request, sizeof(request), "%s,%s", UDS_XSK_MAP_FD_MSG,
> if_name);
> memset(response, 0, sizeof(response));
> - if (make_request_cni(sock, &server, request, NULL, response,
> &out_fd) < 0) {
> + if (make_request_dp(sock, &server, request, NULL, response,
> &out_fd, uds_path) < 0) {
> AF_XDP_LOG(ERR, "Error in processing cmd [%s]\n", request);
> goto err_close;
> }
> @@ -1571,7 +1570,7 @@ get_cni_fd(char *if_name)
> /* Initiate close connection */
> strlcpy(request, UDS_FIN_MSG, UDS_MAX_CMD_LEN);
> memset(response, 0, sizeof(response));
> - if (make_request_cni(sock, &server, request, NULL, response,
> &out_fd) < 0) {
> + if (make_request_dp(sock, &server, request, NULL, response,
> &out_fd, uds_path) < 0) {
> AF_XDP_LOG(ERR, "Error in processing cmd [%s]\n", request);
> goto err_close;
> }
> @@ -1640,7 +1639,7 @@ xsk_configure(struct pmd_internals *internals,
> struct pkt_rx_queue *rxq,
> #endif
>
> /* Disable libbpf from loading XDP program */
> - if (internals->use_cni)
> + if (strnlen(internals->uds_path, PATH_MAX))
> cfg.libbpf_flags |= XSK_LIBBPF_FLAGS__INHIBIT_PROG_LOAD;
>
> if (strnlen(internals->prog_path, PATH_MAX)) {
> @@ -1694,18 +1693,17 @@ xsk_configure(struct pmd_internals *internals,
> struct pkt_rx_queue *rxq,
> }
> }
>
> - if (internals->use_cni) {
> - int err, fd, map_fd;
> + if (strnlen(internals->uds_path, PATH_MAX)) {
> + int err, map_fd;
>
> - /* get socket fd from CNI plugin */
> - map_fd = get_cni_fd(internals->if_name);
> + /* get socket fd from AF_XDP Device plugin */
> + map_fd = get_xskmap_fd(internals->if_name, internals-
> >uds_path);
> if (map_fd < 0) {
> - AF_XDP_LOG(ERR, "Failed to receive CNI plugin fd\n");
> + AF_XDP_LOG(ERR, "Failed to receive AF_XDP Device
> plugin fd\n");
> goto out_xsk;
> }
> - /* get socket fd */
> - fd = xsk_socket__fd(rxq->xsk);
> - err = bpf_map_update_elem(map_fd, &rxq->xsk_queue_idx,
> &fd, 0);
> +
> + err = xsk_socket__update_xskmap(rxq->xsk, map_fd);
> if (err) {
> AF_XDP_LOG(ERR, "Failed to insert unprivileged xsk in
> map.\n");
> goto out_xsk;
> @@ -1881,13 +1879,13 @@ static const struct eth_dev_ops ops = {
> .get_monitor_addr = eth_get_monitor_addr,
> };
>
> -/* CNI option works in unprivileged container environment
> - * and ethernet device functionality will be reduced. So
> - * additional customiszed eth_dev_ops struct is needed
> - * for cni. Promiscuous enable and disable functionality
> - * is removed.
> - **/
> -static const struct eth_dev_ops ops_cni = {
> +/* AF_XDP Device Plugin option works in unprivileged
> + * container environment and ethernet device functionality
> + * will be reduced. So additional customized eth_dev_ops
> + * struct is needed for the AF_XDP Device Plugin. Promiscuous
> + * enable and disable functionality is removed.
> + */
> +static const struct eth_dev_ops ops_afxdp_dp = {
> .dev_start = eth_dev_start,
> .dev_stop = eth_dev_stop,
> .dev_close = eth_dev_close,
> @@ -1957,7 +1955,7 @@ parse_name_arg(const char *key __rte_unused,
>
> /** parse xdp prog argument */
> static int
> -parse_prog_arg(const char *key __rte_unused,
> +parse_path_arg(const char *key __rte_unused,
> const char *value, void *extra_args)
> {
> char *path = extra_args;
> @@ -2023,7 +2021,7 @@ xdp_get_channels_info(const char *if_name, int
> *max_queues,
> static int
> parse_parameters(struct rte_kvargs *kvlist, char *if_name, int *start_queue,
> int *queue_cnt, int *shared_umem, char *prog_path,
> - int *busy_budget, int *force_copy, int *use_cni)
> + int *busy_budget, int *force_copy, char *uds_path)
> {
> int ret;
>
> @@ -2050,7 +2048,7 @@ parse_parameters(struct rte_kvargs *kvlist, char
> *if_name, int *start_queue,
> goto free_kvlist;
>
> ret = rte_kvargs_process(kvlist, ETH_AF_XDP_PROG_ARG,
> - &parse_prog_arg, prog_path);
> + &parse_path_arg, prog_path);
> if (ret < 0)
> goto free_kvlist;
>
> @@ -2064,8 +2062,8 @@ parse_parameters(struct rte_kvargs *kvlist, char
> *if_name, int *start_queue,
> if (ret < 0)
> goto free_kvlist;
>
> - ret = rte_kvargs_process(kvlist, ETH_AF_XDP_USE_CNI_ARG,
> - &parse_integer_arg, use_cni);
> + ret = rte_kvargs_process(kvlist,
> ETH_AF_XDP_USE_DP_UDS_PATH_ARG,
> + &parse_path_arg, uds_path);
> if (ret < 0)
> goto free_kvlist;
>
> @@ -2108,7 +2106,7 @@ static struct rte_eth_dev *
> init_internals(struct rte_vdev_device *dev, const char *if_name,
> int start_queue_idx, int queue_cnt, int shared_umem,
> const char *prog_path, int busy_budget, int force_copy,
> - int use_cni)
> + const char *uds_path)
> {
> const char *name = rte_vdev_device_name(dev);
> const unsigned int numa_node = dev->device.numa_node;
> @@ -2137,7 +2135,7 @@ init_internals(struct rte_vdev_device *dev, const
> char *if_name,
> #endif
> internals->shared_umem = shared_umem;
> internals->force_copy = force_copy;
> - internals->use_cni = use_cni;
> + strlcpy(internals->uds_path, uds_path, PATH_MAX);
>
> if (xdp_get_channels_info(if_name, &internals->max_queue_cnt,
> &internals->combined_queue_cnt)) {
> @@ -2196,10 +2194,10 @@ init_internals(struct rte_vdev_device *dev, const
> char *if_name,
> eth_dev->data->dev_link = pmd_link;
> eth_dev->data->mac_addrs = &internals->eth_addr;
> eth_dev->data->dev_flags |=
> RTE_ETH_DEV_AUTOFILL_QUEUE_XSTATS;
> - if (!internals->use_cni)
> + if (!strnlen(internals->uds_path, PATH_MAX))
> eth_dev->dev_ops = &ops;
> else
> - eth_dev->dev_ops = &ops_cni;
> + eth_dev->dev_ops = &ops_afxdp_dp;
>
> eth_dev->rx_pkt_burst = eth_af_xdp_rx;
> eth_dev->tx_pkt_burst = eth_af_xdp_tx;
> @@ -2327,7 +2325,7 @@ rte_pmd_af_xdp_probe(struct rte_vdev_device
> *dev)
> char prog_path[PATH_MAX] = {'\0'};
> int busy_budget = -1, ret;
> int force_copy = 0;
> - int use_cni = 0;
> + char uds_path[PATH_MAX] = {'\0'};
> struct rte_eth_dev *eth_dev = NULL;
> const char *name = rte_vdev_device_name(dev);
>
> @@ -2370,20 +2368,20 @@ rte_pmd_af_xdp_probe(struct rte_vdev_device
> *dev)
>
> if (parse_parameters(kvlist, if_name, &xsk_start_queue_idx,
> &xsk_queue_cnt, &shared_umem, prog_path,
> - &busy_budget, &force_copy, &use_cni) < 0) {
> + &busy_budget, &force_copy, uds_path) < 0) {
> AF_XDP_LOG(ERR, "Invalid kvargs value\n");
> return -EINVAL;
> }
>
> - if (use_cni && busy_budget > 0) {
> + if (strnlen(uds_path, PATH_MAX) && busy_budget > 0) {
> AF_XDP_LOG(ERR, "When '%s' parameter is used, '%s'
> parameter is not valid\n",
> - ETH_AF_XDP_USE_CNI_ARG,
> ETH_AF_XDP_BUDGET_ARG);
> + ETH_AF_XDP_USE_DP_UDS_PATH_ARG,
> ETH_AF_XDP_BUDGET_ARG);
> return -EINVAL;
> }
>
> - if (use_cni && strnlen(prog_path, PATH_MAX)) {
> + if (strnlen(uds_path, PATH_MAX) && strnlen(prog_path, PATH_MAX))
> {
> AF_XDP_LOG(ERR, "When '%s' parameter is used, '%s'
> parameter is not valid\n",
> - ETH_AF_XDP_USE_CNI_ARG,
> ETH_AF_XDP_PROG_ARG);
> + ETH_AF_XDP_USE_DP_UDS_PATH_ARG,
> ETH_AF_XDP_PROG_ARG);
> return -EINVAL;
> }
>
> @@ -2410,7 +2408,7 @@ rte_pmd_af_xdp_probe(struct rte_vdev_device
> *dev)
>
> eth_dev = init_internals(dev, if_name, xsk_start_queue_idx,
> xsk_queue_cnt, shared_umem, prog_path,
> - busy_budget, force_copy, use_cni);
> + busy_budget, force_copy, uds_path);
> if (eth_dev == NULL) {
> AF_XDP_LOG(ERR, "Failed to init internals\n");
> return -1;
> @@ -2471,4 +2469,4 @@ RTE_PMD_REGISTER_PARAM_STRING(net_af_xdp,
> "xdp_prog=<string> "
> "busy_budget=<int> "
> "force_copy=<int> "
> - "use_cni=<int> ");
> + "uds_path=<string> ");
> --
> 2.41.0
next prev parent reply other threads:[~2023-12-15 9:55 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-12-13 12:24 Maryam Tahhan
2023-12-15 9:55 ` Loftus, Ciara [this message]
2023-12-15 10:26 ` Maryam Tahhan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=MW4PR11MB587215552A95C068FE63D32D8E93A@MW4PR11MB5872.namprd11.prod.outlook.com \
--to=ciara.loftus@intel.com \
--cc=dev@dpdk.org \
--cc=fengchengwen@huawei.com \
--cc=ferruh.yigit@amd.com \
--cc=lihuisong@huawei.com \
--cc=liuyonglong@huawei.com \
--cc=mtahhan@redhat.com \
--cc=shibin.koikkara.reeny@intel.com \
--cc=stephen@networkplumber.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).