DPDK patches and discussions
 help / color / mirror / Atom feed
From: Mahipal Challa <mchalla@marvell.com>
To: Gavin Hu <Gavin.Hu@arm.com>, "dev@dpdk.org" <dev@dpdk.org>
Cc: Jerin Jacob Kollanukkaran <jerinj@marvell.com>,
	"Narayana Prasad Raju Athreya" <pathreya@marvell.com>,
	Subrahmanyam Nilla <snilla@marvell.com>,
	Venkateshwarlu Nalla <venkatn@marvell.com>, nd <nd@arm.com>
Subject: Re: [dpdk-dev] [PATCH v3 2/6] raw/octeontx2_ep: add device configuration
Date: Tue, 7 Jan 2020 06:46:19 +0000	[thread overview]
Message-ID: <MWHPR18MB1376CDA55C9F340C0433D429BE3F0@MWHPR18MB1376.namprd18.prod.outlook.com> (raw)
In-Reply-To: <VI1PR08MB53768CDE9CA27C49D55C1E338F3F0@VI1PR08MB5376.eurprd08.prod.outlook.com>

Hi Gavin,
Please see the response inline.

Thanks,
Mahipal
> -----Original Message-----
> From: Gavin Hu <Gavin.Hu@arm.com>
> Sent: Tuesday, January 7, 2020 11:31 AM
> To: Mahipal Challa <mchalla@marvell.com>; dev@dpdk.org
> Cc: Jerin Jacob Kollanukkaran <jerinj@marvell.com>; Narayana Prasad Raju
> Athreya <pathreya@marvell.com>; Subrahmanyam Nilla
> <snilla@marvell.com>; Venkateshwarlu Nalla <venkatn@marvell.com>; nd
> <nd@arm.com>
> Subject: [EXT] RE: [dpdk-dev] [PATCH v3 2/6] raw/octeontx2_ep: add device
> configuration
> 
> External Email
> 
> ----------------------------------------------------------------------
> Hi Mahipal,
> 
> > -----Original Message-----
> > From: Mahipal Challa <mchalla@marvell.com>
> > Sent: Monday, January 6, 2020 8:07 PM
> > To: dev@dpdk.org
> > Cc: jerinj@marvell.com; pathreya@marvell.com; snilla@marvell.com;
> > venkatn@marvell.com; Gavin Hu <Gavin.Hu@arm.com>
> > Subject: [dpdk-dev] [PATCH v3 2/6] raw/octeontx2_ep: add device
> > configuration
> >
> > Register "dev_configure" API to configure/initialize the SDP
> > VF PCIe devices.
> >
> > Signed-off-by: Mahipal Challa <mchalla@marvell.com>
> > ---
> >  doc/guides/rawdevs/octeontx2_ep.rst                |  29 ++
> >  drivers/common/octeontx2/hw/otx2_sdp.h             | 184 +++++++++
> >  drivers/common/octeontx2/otx2_common.c             |   9 +
> >  drivers/common/octeontx2/otx2_common.h             |   4 +
> >  .../octeontx2/rte_common_octeontx2_version.map     |   6 +
> >  drivers/raw/octeontx2_ep/Makefile                  |   3 +
> >  drivers/raw/octeontx2_ep/meson.build               |   4 +-
> >  drivers/raw/octeontx2_ep/otx2_ep_enqdeq.c          | 294 ++++++++++++++
> >  drivers/raw/octeontx2_ep/otx2_ep_enqdeq.h          |  11 +
> >  drivers/raw/octeontx2_ep/otx2_ep_rawdev.c          | 148 +++++++
> >  drivers/raw/octeontx2_ep/otx2_ep_rawdev.h          | 434
> > ++++++++++++++++++++-
> >  drivers/raw/octeontx2_ep/otx2_ep_vf.c              | 408
> > +++++++++++++++++++
> >  drivers/raw/octeontx2_ep/otx2_ep_vf.h              |  10 +
> >  13 files changed, 1542 insertions(+), 2 deletions(-)
> >
> > diff --git a/doc/guides/rawdevs/octeontx2_ep.rst
> > b/doc/guides/rawdevs/octeontx2_ep.rst
> > index 5f5ed01..2507fcf 100644
> > --- a/doc/guides/rawdevs/octeontx2_ep.rst
> > +++ b/doc/guides/rawdevs/octeontx2_ep.rst
> > @@ -39,3 +39,32 @@ entry `sriov_numvfs` for the corresponding PF
> driver.
> >
> >  Once the required VFs are enabled, to be accessible from DPDK, VFs need
> to
> > be
> >  bound to vfio-pci driver.
> > +
> > +Device Setup
> > +------------
> > +
> > +The OCTEON TX2 SDP End Point VF devices will need to be bound to a
> > +user-space IO driver for use. The script ``dpdk-devbind.py`` script
> > +included with DPDK can be used to view the state of the devices and to
> bind
> > +them to a suitable DPDK-supported kernel driver. When querying the
> status
> > +of the devices, they will appear under the category of "Misc (rawdev)
> > +devices", i.e. the command ``dpdk-devbind.py --status-dev misc`` can be
> > +used to see the state of those devices alone.
> > +
> > +Device Configuration
> > +--------------------
> > +
> > +Configuring SDP EP rawdev device is done using the
> > ``rte_rawdev_configure()``
> > +API, which takes the mempool as parameter. PMD uses this pool to
> > send/receive
> > +packets to/from the HW.
> > +
> > +The following code shows how the device is configured
> > +
> > +.. code-block:: c
> > +
> > +   struct sdp_rawdev_info config = {0};
> > +   struct rte_rawdev_info rdev_info = {.dev_private = &config};
> > +   config.enqdeq_mpool = (void *)rte_mempool_create(...);
> > +
> > +   rte_rawdev_configure(dev_id, (rte_rawdev_obj_t)&rdev_info);
> > +
> > diff --git a/drivers/common/octeontx2/hw/otx2_sdp.h
> > b/drivers/common/octeontx2/hw/otx2_sdp.h
> > new file mode 100644
> > index 0000000..1e690f8
> > --- /dev/null
> > +++ b/drivers/common/octeontx2/hw/otx2_sdp.h
> > @@ -0,0 +1,184 @@
> > +/* SPDX-License-Identifier: BSD-3-Clause
> > + * Copyright(C) 2019 Marvell International Ltd.
> > + */
> > +
> > +#ifndef __OTX2_SDP_HW_H_
> > +#define __OTX2_SDP_HW_H_
> > +
> > +/* SDP VF IOQs */
> > +#define SDP_MIN_RINGS_PER_VF        (1)
> > +#define SDP_MAX_RINGS_PER_VF        (8)
> > +
> > +/* SDP VF IQ configuration */
> > +#define SDP_VF_MAX_IQ_DESCRIPTORS   (512)
> > +#define SDP_VF_MIN_IQ_DESCRIPTORS   (128)
> > +
> > +#define SDP_VF_DB_MIN               (1)
> > +#define SDP_VF_DB_TIMEOUT           (1)
> > +#define SDP_VF_INTR_THRESHOLD       (0xFFFFFFFF)
> > +
> > +#define SDP_VF_64BYTE_INSTR         (64)
> > +#define SDP_VF_32BYTE_INSTR         (32)
> > +
> > +/* SDP VF OQ configuration */
> > +#define SDP_VF_MAX_OQ_DESCRIPTORS   (512)
> > +#define SDP_VF_MIN_OQ_DESCRIPTORS   (128)
> > +#define SDP_VF_OQ_BUF_SIZE          (2048)
> > +#define SDP_VF_OQ_REFIL_THRESHOLD   (16)
> > +
> > +#define SDP_VF_OQ_INFOPTR_MODE      (1)
> > +#define SDP_VF_OQ_BUFPTR_MODE       (0)
> > +
> > +#define SDP_VF_OQ_INTR_PKT          (1)
> > +#define SDP_VF_OQ_INTR_TIME         (10)
> > +#define SDP_VF_CFG_IO_QUEUES        SDP_MAX_RINGS_PER_VF
> > +
> > +/* Wait time in milliseconds for FLR */
> > +#define SDP_VF_PCI_FLR_WAIT         (100)
> > +#define SDP_VF_BUSY_LOOP_COUNT      (10000)
> > +
> > +#define SDP_VF_MAX_IO_QUEUES        SDP_MAX_RINGS_PER_VF
> > +#define SDP_VF_MIN_IO_QUEUES        SDP_MIN_RINGS_PER_VF
> > +
> > +/* SDP VF IOQs per rawdev */
> > +#define SDP_VF_MAX_IOQS_PER_RAWDEV      SDP_VF_MAX_IO_QUEUES
> > +#define SDP_VF_DEFAULT_IOQS_PER_RAWDEV
> SDP_VF_MIN_IO_QUEUES
> > +
> > +/* SDP VF Register definitions */
> > +#define SDP_VF_RING_OFFSET                (0x1ull << 17)
> > +
> > +/* SDP VF IQ Registers */
> > +#define SDP_VF_R_IN_CONTROL_START         (0x10000)
> > +#define SDP_VF_R_IN_ENABLE_START          (0x10010)
> > +#define SDP_VF_R_IN_INSTR_BADDR_START     (0x10020)
> > +#define SDP_VF_R_IN_INSTR_RSIZE_START     (0x10030)
> > +#define SDP_VF_R_IN_INSTR_DBELL_START     (0x10040)
> > +#define SDP_VF_R_IN_CNTS_START            (0x10050)
> > +#define SDP_VF_R_IN_INT_LEVELS_START      (0x10060)
> > +#define SDP_VF_R_IN_PKT_CNT_START         (0x10080)
> > +#define SDP_VF_R_IN_BYTE_CNT_START        (0x10090)
> > +
> > +#define SDP_VF_R_IN_CONTROL(ring)  \
> > +	(SDP_VF_R_IN_CONTROL_START + ((ring) * SDP_VF_RING_OFFSET))
> > +
> > +#define SDP_VF_R_IN_ENABLE(ring)   \
> > +	(SDP_VF_R_IN_ENABLE_START + ((ring) * SDP_VF_RING_OFFSET))
> > +
> > +#define SDP_VF_R_IN_INSTR_BADDR(ring)   \
> > +	(SDP_VF_R_IN_INSTR_BADDR_START + ((ring) *
> > SDP_VF_RING_OFFSET))
> > +
> > +#define SDP_VF_R_IN_INSTR_RSIZE(ring)   \
> > +	(SDP_VF_R_IN_INSTR_RSIZE_START + ((ring) *
> > SDP_VF_RING_OFFSET))
> > +
> > +#define SDP_VF_R_IN_INSTR_DBELL(ring)   \
> > +	(SDP_VF_R_IN_INSTR_DBELL_START + ((ring) *
> > SDP_VF_RING_OFFSET))
> > +
> > +#define SDP_VF_R_IN_CNTS(ring)          \
> > +	(SDP_VF_R_IN_CNTS_START + ((ring) * SDP_VF_RING_OFFSET))
> > +
> > +#define SDP_VF_R_IN_INT_LEVELS(ring)    \
> > +	(SDP_VF_R_IN_INT_LEVELS_START + ((ring) * SDP_VF_RING_OFFSET))
> > +
> > +#define SDP_VF_R_IN_PKT_CNT(ring)       \
> > +	(SDP_VF_R_IN_PKT_CNT_START + ((ring) * SDP_VF_RING_OFFSET))
> > +
> > +#define SDP_VF_R_IN_BYTE_CNT(ring)          \
> > +	(SDP_VF_R_IN_BYTE_CNT_START + ((ring) * SDP_VF_RING_OFFSET))
> > +
> > +/* SDP VF IQ Masks */
> > +#define SDP_VF_R_IN_CTL_RPVF_MASK       (0xF)
> > +#define	SDP_VF_R_IN_CTL_RPVF_POS        (48)
> > +
> > +#define SDP_VF_R_IN_CTL_IDLE            (0x1ull << 28)
> > +#define SDP_VF_R_IN_CTL_RDSIZE          (0x3ull << 25) /* Setting to max(4)
> */
> > +#define SDP_VF_R_IN_CTL_IS_64B          (0x1ull << 24)
> > +#define SDP_VF_R_IN_CTL_D_NSR           (0x1ull << 8)
> > +#define SDP_VF_R_IN_CTL_D_ESR           (0x1ull << 6)
> > +#define SDP_VF_R_IN_CTL_D_ROR           (0x1ull << 5)
> > +#define SDP_VF_R_IN_CTL_NSR             (0x1ull << 3)
> > +#define SDP_VF_R_IN_CTL_ESR             (0x1ull << 1)
> > +#define SDP_VF_R_IN_CTL_ROR             (0x1ull << 0)
> > +
> > +#define SDP_VF_R_IN_CTL_MASK  \
> > +	(SDP_VF_R_IN_CTL_RDSIZE | SDP_VF_R_IN_CTL_IS_64B)
> > +
> > +/* SDP VF OQ Registers */
> > +#define SDP_VF_R_OUT_CNTS_START              (0x10100)
> > +#define SDP_VF_R_OUT_INT_LEVELS_START        (0x10110)
> > +#define SDP_VF_R_OUT_SLIST_BADDR_START       (0x10120)
> > +#define SDP_VF_R_OUT_SLIST_RSIZE_START       (0x10130)
> > +#define SDP_VF_R_OUT_SLIST_DBELL_START       (0x10140)
> > +#define SDP_VF_R_OUT_CONTROL_START           (0x10150)
> > +#define SDP_VF_R_OUT_ENABLE_START            (0x10160)
> > +#define SDP_VF_R_OUT_PKT_CNT_START           (0x10180)
> > +#define SDP_VF_R_OUT_BYTE_CNT_START          (0x10190)
> > +
> > +#define SDP_VF_R_OUT_CONTROL(ring)    \
> > +	(SDP_VF_R_OUT_CONTROL_START + ((ring) *
> > SDP_VF_RING_OFFSET))
> > +
> > +#define SDP_VF_R_OUT_ENABLE(ring)     \
> > +	(SDP_VF_R_OUT_ENABLE_START + ((ring) * SDP_VF_RING_OFFSET))
> > +
> > +#define SDP_VF_R_OUT_SLIST_BADDR(ring)  \
> > +	(SDP_VF_R_OUT_SLIST_BADDR_START + ((ring) *
> > SDP_VF_RING_OFFSET))
> > +
> > +#define SDP_VF_R_OUT_SLIST_RSIZE(ring)  \
> > +	(SDP_VF_R_OUT_SLIST_RSIZE_START + ((ring) *
> > SDP_VF_RING_OFFSET))
> > +
> > +#define SDP_VF_R_OUT_SLIST_DBELL(ring)  \
> > +	(SDP_VF_R_OUT_SLIST_DBELL_START + ((ring) *
> > SDP_VF_RING_OFFSET))
> > +
> > +#define SDP_VF_R_OUT_CNTS(ring)   \
> > +	(SDP_VF_R_OUT_CNTS_START + ((ring) * SDP_VF_RING_OFFSET))
> > +
> > +#define SDP_VF_R_OUT_INT_LEVELS(ring)   \
> > +	(SDP_VF_R_OUT_INT_LEVELS_START + ((ring) *
> > SDP_VF_RING_OFFSET))
> > +
> > +#define SDP_VF_R_OUT_PKT_CNT(ring)   \
> > +	(SDP_VF_R_OUT_PKT_CNT_START + ((ring) * SDP_VF_RING_OFFSET))
> > +
> > +#define SDP_VF_R_OUT_BYTE_CNT(ring)   \
> > +	(SDP_VF_R_OUT_BYTE_CNT_START + ((ring) *
> > SDP_VF_RING_OFFSET))
> > +
> > +/* SDP VF OQ Masks */
> > +#define SDP_VF_R_OUT_CTL_IDLE         (1ull << 40)
> > +#define SDP_VF_R_OUT_CTL_ES_I         (1ull << 34)
> > +#define SDP_VF_R_OUT_CTL_NSR_I        (1ull << 33)
> > +#define SDP_VF_R_OUT_CTL_ROR_I        (1ull << 32)
> > +#define SDP_VF_R_OUT_CTL_ES_D         (1ull << 30)
> > +#define SDP_VF_R_OUT_CTL_NSR_D        (1ull << 29)
> > +#define SDP_VF_R_OUT_CTL_ROR_D        (1ull << 28)
> > +#define SDP_VF_R_OUT_CTL_ES_P         (1ull << 26)
> > +#define SDP_VF_R_OUT_CTL_NSR_P        (1ull << 25)
> > +#define SDP_VF_R_OUT_CTL_ROR_P        (1ull << 24)
> > +#define SDP_VF_R_OUT_CTL_IMODE        (1ull << 23)
> > +
> > +#define SDP_VF_R_OUT_INT_LEVELS_BMODE     (1ull << 63)
> > +#define SDP_VF_R_OUT_INT_LEVELS_TIMET     (32)
> > +
> > +/* SDP Instruction Header */
> > +struct sdp_instr_ih {
> > +	/* Data Len */
> > +	uint64_t tlen:16;
> > +
> > +	/* Reserved1 */
> > +	uint64_t rsvd1:20;
> > +
> > +	/* PKIND for SDP */
> > +	uint64_t pkind:6;
> > +
> > +	/* Front Data size */
> > +	uint64_t fsz:6;
> > +
> > +	/* No. of entries in gather list */
> > +	uint64_t gsz:14;
> > +
> > +	/* Gather indicator */
> > +	uint64_t gather:1;
> > +
> > +	/* Reserved2 */
> > +	uint64_t rsvd2:1;
> > +} __rte_packed;
> > +
> > +#endif /* __OTX2_SDP_HW_H_  */
> > +
> > diff --git a/drivers/common/octeontx2/otx2_common.c
> > b/drivers/common/octeontx2/otx2_common.c
> > index 7e45366..1a257cf 100644
> > --- a/drivers/common/octeontx2/otx2_common.c
> > +++ b/drivers/common/octeontx2/otx2_common.c
> > @@ -205,6 +205,10 @@ int otx2_npa_lf_obj_ref(void)
> >   * @internal
> >   */
> >  int otx2_logtype_dpi;
> > +/**
> > + * @internal
> > + */
> > +int otx2_logtype_ep;
> >
> >  RTE_INIT(otx2_log_init);
> >  static void
> > @@ -245,4 +249,9 @@ int otx2_npa_lf_obj_ref(void)
> >  	otx2_logtype_dpi = rte_log_register("pmd.raw.octeontx2.dpi");
> >  	if (otx2_logtype_dpi >= 0)
> >  		rte_log_set_level(otx2_logtype_dpi, RTE_LOG_NOTICE);
> > +
> > +	otx2_logtype_ep = rte_log_register("pmd.raw.octeontx2.ep");
> > +	if (otx2_logtype_ep >= 0)
> > +		rte_log_set_level(otx2_logtype_ep, RTE_LOG_NOTICE);
> > +
> >  }
> > diff --git a/drivers/common/octeontx2/otx2_common.h
> > b/drivers/common/octeontx2/otx2_common.h
> > index f62c45d..6bc55ca 100644
> > --- a/drivers/common/octeontx2/otx2_common.h
> > +++ b/drivers/common/octeontx2/otx2_common.h
> > @@ -16,6 +16,7 @@
> >  #include "hw/otx2_nix.h"
> >  #include "hw/otx2_npc.h"
> >  #include "hw/otx2_npa.h"
> > +#include "hw/otx2_sdp.h"
> >  #include "hw/otx2_sso.h"
> >  #include "hw/otx2_ssow.h"
> >  #include "hw/otx2_tim.h"
> > @@ -85,6 +86,7 @@ struct otx2_idev_cfg {
> >  extern int otx2_logtype_tm;
> >  extern int otx2_logtype_tim;
> >  extern int otx2_logtype_dpi;
> > +extern int otx2_logtype_ep;
> >
> >  #define otx2_err(fmt, args...)			\
> >  	RTE_LOG(ERR, PMD, "%s():%u " fmt "\n",	\
> > @@ -107,6 +109,7 @@ struct otx2_idev_cfg {
> >  #define otx2_tm_dbg(fmt, ...) otx2_dbg(tm, fmt, ##__VA_ARGS__)
> >  #define otx2_tim_dbg(fmt, ...) otx2_dbg(tim, fmt, ##__VA_ARGS__)
> >  #define otx2_dpi_dbg(fmt, ...) otx2_dbg(dpi, fmt, ##__VA_ARGS__)
> > +#define otx2_sdp_dbg(fmt, ...) otx2_dbg(ep, fmt, ##__VA_ARGS__)
> >
> >  /* PCI IDs */
> >  #define PCI_VENDOR_ID_CAVIUM			0x177D
> > @@ -121,6 +124,7 @@ struct otx2_idev_cfg {
> >  #define PCI_DEVID_OCTEONTX2_RVU_CPT_VF		0xA0FE
> >  #define PCI_DEVID_OCTEONTX2_RVU_AF_VF		0xA0f8
> >  #define PCI_DEVID_OCTEONTX2_DPI_VF		0xA081
> > +#define PCI_DEVID_OCTEONTX2_EP_VF		0xB203 /* OCTEON
> > TX2 EP mode */
> >  #define PCI_DEVID_OCTEONTX2_RVU_SDP_PF		0xA0f6
> >  #define PCI_DEVID_OCTEONTX2_RVU_SDP_VF		0xA0f7
> >
> > diff --git
> a/drivers/common/octeontx2/rte_common_octeontx2_version.map
> > b/drivers/common/octeontx2/rte_common_octeontx2_version.map
> > index adad21a..a51d719 100644
> > --- a/drivers/common/octeontx2/rte_common_octeontx2_version.map
> > +++ b/drivers/common/octeontx2/rte_common_octeontx2_version.map
> > @@ -33,3 +33,9 @@ DPDK_20.0 {
> >
> >  	local: *;
> >  };
> > +
> > +EXPERIMENTAL {
> > +	global:
> > +
> > +	otx2_logtype_ep;
> > +};
> > diff --git a/drivers/raw/octeontx2_ep/Makefile
> > b/drivers/raw/octeontx2_ep/Makefile
> > index 8cec6bd..02853fb 100644
> > --- a/drivers/raw/octeontx2_ep/Makefile
> > +++ b/drivers/raw/octeontx2_ep/Makefile
> > @@ -36,5 +36,8 @@ LIBABIVER := 1
> >  # All source are stored in SRCS-y
> >  #
> >  SRCS-$(CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_EP_RAWDEV) +=
> > otx2_ep_rawdev.c
> > +SRCS-$(CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_EP_RAWDEV) +=
> > otx2_ep_enqdeq.c
> > +SRCS-$(CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_EP_RAWDEV) +=
> > otx2_ep_vf.c
> > +
> >
> >  include $(RTE_SDK)/mk/rte.lib.mk
> > diff --git a/drivers/raw/octeontx2_ep/meson.build
> > b/drivers/raw/octeontx2_ep/meson.build
> > index e513131..99e6c6d 100644
> > --- a/drivers/raw/octeontx2_ep/meson.build
> > +++ b/drivers/raw/octeontx2_ep/meson.build
> > @@ -3,4 +3,6 @@
> >  #
> >
> >  deps += ['bus_pci', 'common_octeontx2', 'rawdev']
> > -sources = files('otx2_ep_rawdev.c')
> > +sources = files('otx2_ep_rawdev.c',
> > +		'otx2_ep_enqdeq.c',
> > +		'otx2_ep_vf.c')
> > diff --git a/drivers/raw/octeontx2_ep/otx2_ep_enqdeq.c
> > b/drivers/raw/octeontx2_ep/otx2_ep_enqdeq.c
> > new file mode 100644
> > index 0000000..8857004
> > --- /dev/null
> > +++ b/drivers/raw/octeontx2_ep/otx2_ep_enqdeq.c
> > @@ -0,0 +1,294 @@
> > +/* SPDX-License-Identifier: BSD-3-Clause
> > + * Copyright(C) 2019 Marvell International Ltd.
> > + */
> > +
> > +#include <string.h>
> > +#include <unistd.h>
> > +#include <dirent.h>
> > +#include <fcntl.h>
> > +
> > +#include <rte_bus.h>
> > +#include <rte_bus_pci.h>
> > +#include <rte_eal.h>
> > +#include <rte_lcore.h>
> > +#include <rte_mempool.h>
> > +#include <rte_pci.h>
> > +
> > +#include <rte_common.h>
> > +#include <rte_rawdev.h>
> > +#include <rte_rawdev_pmd.h>
> > +
> > +#include "otx2_common.h"
> > +#include "otx2_ep_enqdeq.h"
> > +
> > +/* IQ initialization */
> > +static int
> > +sdp_init_instr_queue(struct sdp_device *sdpvf, int iq_no)
> > +{
> > +	const struct sdp_config *conf;
> > +	struct sdp_instr_queue *iq;
> > +	uint32_t q_size;
> > +
> > +	conf = sdpvf->conf;
> > +	iq = sdpvf->instr_queue[iq_no];
> > +	q_size = conf->iq.instr_type * conf->num_iqdef_descs;
> > +
> > +	/* IQ memory creation for Instruction submission to OCTEON TX2 */
> > +	iq->iq_mz = rte_memzone_reserve_aligned("iqmz",
> > +					q_size,
> > +					rte_socket_id(),
> > +					RTE_MEMZONE_IOVA_CONTIG,
> > +					RTE_CACHE_LINE_SIZE);
> > +	if (iq->iq_mz == NULL) {
> > +		otx2_err("IQ[%d] memzone alloc failed", iq_no);
> > +		goto iq_init_fail;
> > +	}
> > +
> > +	iq->base_addr_dma = iq->iq_mz->iova;
> > +	iq->base_addr = (uint8_t *)iq->iq_mz->addr;
> > +
> > +	if (conf->num_iqdef_descs & (conf->num_iqdef_descs - 1)) {
> > +		otx2_err("IQ[%d] descs not in power of 2", iq_no);
> Upon an error here, should everything rollback, including free the iq_mz
> above?

[Mahipal]: As the freeing of resources come under uninitialization, so this is handled in "[PATCH v3 3/6] raw/octeontx2_ep: add device uninitialization" patch. You are requested to check and confirm.

> > +		goto iq_init_fail;
> > +	}
> > +
> > +	iq->nb_desc = conf->num_iqdef_descs;
> > +
> > +	/* Create a IQ request list to hold requests that have been
> > +	 * posted to OCTEON TX2. This list will be used for freeing the IQ
> > +	 * data buffer(s) later once the OCTEON TX2 fetched the requests.
> > +	 */
> > +	iq->req_list = rte_zmalloc_socket("request_list",
> > +			(iq->nb_desc * SDP_IQREQ_LIST_SIZE),
> > +			RTE_CACHE_LINE_SIZE,
> > +			rte_socket_id());
> > +	if (iq->req_list == NULL) {
> > +		otx2_err("IQ[%d] req_list alloc failed", iq_no);


> Ditto
[Mahipal]: Explained above.


> > +		goto iq_init_fail;
> > +	}
> > +
> > +	otx2_info("IQ[%d]: base: %p basedma: %lx count: %d",
> > +		     iq_no, iq->base_addr, (unsigned long)iq-
> >base_addr_dma,
> > +		     iq->nb_desc);
> > +
> > +	iq->sdp_dev = sdpvf;
> > +	iq->q_no = iq_no;
> > +	iq->fill_cnt = 0;
> > +	iq->host_write_index = 0;
> > +	iq->otx_read_index = 0;
> > +	iq->flush_index = 0;
> > +
> > +	/* Initialize the spinlock for this instruction queue */
> > +	rte_spinlock_init(&iq->lock);
> > +	rte_spinlock_init(&iq->post_lock);
> > +
> > +	rte_atomic64_clear(&iq->iq_flush_running);
> > +
> > +	sdpvf->io_qmask.iq |= (1ull << iq_no);
> > +
> > +	/* Set 32B/64B mode for each input queue */
> > +	if (conf->iq.instr_type == 64)
> > +		sdpvf->io_qmask.iq64B |= (1ull << iq_no);
> > +
> > +	iq->iqcmd_64B = (conf->iq.instr_type == 64);
> > +
> > +	/* Set up IQ registers */
> > +	sdpvf->fn_list.setup_iq_regs(sdpvf, iq_no);
> > +
> > +	return 0;
> > +
> > +iq_init_fail:
> > +	return -ENOMEM;
> > +
> > +}
> > +
> > +int
> > +sdp_setup_iqs(struct sdp_device *sdpvf, uint32_t iq_no)
> > +{
> > +	struct sdp_instr_queue *iq;
> > +
> > +	iq = (struct sdp_instr_queue *)rte_zmalloc("sdp_IQ", sizeof(*iq),
> > +						RTE_CACHE_LINE_SIZE);
> > +	if (iq == NULL)
> > +		return -ENOMEM;
> > +
> > +	sdpvf->instr_queue[iq_no] = iq;
> > +
> > +	if (sdp_init_instr_queue(sdpvf, iq_no)) {
> > +		otx2_err("IQ init is failed");
> > +		goto delete_IQ;
> > +	}
> > +	otx2_info("IQ[%d] is created.", sdpvf->num_iqs);
> > +
> > +	sdpvf->num_iqs++;
> > +
> > +
> > +	return 0;
> > +
> > +delete_IQ:
> > +	return -ENOMEM;
> > +}
> > +
> > +static void
> > +sdp_droq_reset_indices(struct sdp_droq *droq)
> > +{
> > +	droq->read_idx  = 0;
> > +	droq->write_idx = 0;
> > +	droq->refill_idx = 0;
> > +	droq->refill_count = 0;
> > +	rte_atomic64_set(&droq->pkts_pending, 0);
> > +}
> > +
> > +static int
> > +sdp_droq_setup_ring_buffers(struct sdp_device *sdpvf,
> > +		struct sdp_droq *droq)
> > +{
> > +	struct sdp_droq_desc *desc_ring = droq->desc_ring;
> > +	uint32_t idx;
> > +	void *buf;
> > +
> > +	for (idx = 0; idx < droq->nb_desc; idx++) {
> > +		rte_mempool_get(sdpvf->enqdeq_mpool, &buf);
> > +		if (buf == NULL) {
> > +			otx2_err("OQ buffer alloc failed");
> > +			/* sdp_droq_destroy_ring_buffers(droq);*/
> > +			return -ENOMEM;
> > +		}
> > +
> > +		droq->recv_buf_list[idx].buffer = buf;
> > +		droq->info_list[idx].length = 0;
> > +
> > +		/* Map ring buffers into memory */
> > +		desc_ring[idx].info_ptr = (uint64_t)(droq->info_list_dma +
> > +			(idx * SDP_DROQ_INFO_SIZE));
> > +
> > +		desc_ring[idx].buffer_ptr = rte_mem_virt2iova(buf);
> > +	}
> > +
> > +	sdp_droq_reset_indices(droq);
> > +
> > +	return 0;
> > +}
> > +
> > +static void *
> > +sdp_alloc_info_buffer(struct sdp_device *sdpvf __rte_unused,
> > +	struct sdp_droq *droq)
> > +{
> > +	droq->info_mz = rte_memzone_reserve_aligned("OQ_info_list",
> > +				(droq->nb_desc * SDP_DROQ_INFO_SIZE),
> > +				rte_socket_id(),
> > +				RTE_MEMZONE_IOVA_CONTIG,
> > +				RTE_CACHE_LINE_SIZE);
> > +
> > +	if (droq->info_mz == NULL)
> > +		return NULL;
> > +
> > +	droq->info_list_dma = droq->info_mz->iova;
> > +	droq->info_alloc_size = droq->info_mz->len;
> > +	droq->info_base_addr = (size_t)droq->info_mz->addr;
> > +
> > +	return droq->info_mz->addr;
> > +}
> > +
> > +/* OQ initialization */
> > +static int
> > +sdp_init_droq(struct sdp_device *sdpvf, uint32_t q_no)
> > +{
> > +	const struct sdp_config *conf = sdpvf->conf;
> > +	uint32_t c_refill_threshold;
> > +	uint32_t desc_ring_size;
> > +	struct sdp_droq *droq;
> > +
> > +	otx2_info("OQ[%d] Init start", q_no);
> > +
> > +	droq = sdpvf->droq[q_no];
> > +	droq->sdp_dev = sdpvf;
> > +	droq->q_no = q_no;
> > +
> > +	c_refill_threshold = conf->oq.refill_threshold;
> > +	droq->nb_desc      = conf->num_oqdef_descs;
> > +	droq->buffer_size  = conf->oqdef_buf_size;
> > +
> > +	/* OQ desc_ring set up */
> > +	desc_ring_size = droq->nb_desc * SDP_DROQ_DESC_SIZE;
> > +	droq->desc_ring_mz = rte_memzone_reserve_aligned("sdp_oqmz",
> > +						desc_ring_size,
> > +						rte_socket_id(),
> > +
> > 	RTE_MEMZONE_IOVA_CONTIG,
> > +						RTE_CACHE_LINE_SIZE);
> > +
> > +	if (droq->desc_ring_mz == NULL) {
> > +		otx2_err("OQ:%d desc_ring allocation failed", q_no);
> > +		goto init_droq_fail;
> > +	}
> > +
> > +	droq->desc_ring_dma = droq->desc_ring_mz->iova;
> > +	droq->desc_ring = (struct sdp_droq_desc *)droq->desc_ring_mz-
> > >addr;
> > +
> > +	otx2_sdp_dbg("OQ[%d]: desc_ring: virt: 0x%p, dma: %lx",
> > +		    q_no, droq->desc_ring, (unsigned long)droq-
> > >desc_ring_dma);
> > +	otx2_sdp_dbg("OQ[%d]: num_desc: %d", q_no, droq->nb_desc);
> > +
> > +
> > +	/* OQ info_list set up */
> > +	droq->info_list = sdp_alloc_info_buffer(sdpvf, droq);
> > +	if (droq->info_list == NULL) {
> > +		otx2_err("memory allocation failed for OQ[%d] info_list",
> > q_no);
> > +		goto init_droq_fail;
> > +	}
> > +
> > +	/* OQ buf_list set up */
> > +	droq->recv_buf_list = rte_zmalloc_socket("recv_buf_list",
> > +				(droq->nb_desc *
> > SDP_DROQ_RECVBUF_SIZE),
> > +				 RTE_CACHE_LINE_SIZE, rte_socket_id());
> > +	if (droq->recv_buf_list == NULL) {
> > +		otx2_err("OQ recv_buf_list alloc failed");
> > +		goto init_droq_fail;
> > +	}
> > +
> > +	if (sdp_droq_setup_ring_buffers(sdpvf, droq))
> > +		goto init_droq_fail;
> > +
> > +	droq->refill_threshold = c_refill_threshold;
> > +	rte_spinlock_init(&droq->lock);
> > +
> > +
> > +	/* Set up OQ registers */
> > +	sdpvf->fn_list.setup_oq_regs(sdpvf, q_no);
> > +
> > +	sdpvf->io_qmask.oq |= (1ull << q_no);
> > +
> > +	return 0;
> > +
> > +init_droq_fail:
> > +	return -ENOMEM;
> > +}
> > +
> > +/* OQ configuration and setup */
> > +int
> > +sdp_setup_oqs(struct sdp_device *sdpvf, uint32_t oq_no)
> > +{
> > +	struct sdp_droq *droq;
> > +
> > +	/* Allocate new droq. */
> > +	droq = (struct sdp_droq *)rte_zmalloc("sdp_OQ",
> > +				sizeof(*droq), RTE_CACHE_LINE_SIZE);
> > +	if (droq == NULL) {
> > +		otx2_err("Droq[%d] Creation Failed", oq_no);
> > +		return -ENOMEM;
> > +	}
> > +	sdpvf->droq[oq_no] = droq;
> > +
> > +	if (sdp_init_droq(sdpvf, oq_no)) {
> > +		otx2_err("Droq[%d] Initialization failed", oq_no);
> > +		goto delete_OQ;
> > +	}
> > +	otx2_info("OQ[%d] is created.", oq_no);
> > +
> > +	sdpvf->num_oqs++;
> > +
> > +	return 0;
> > +
> > +delete_OQ:
> > +	return -ENOMEM;
> > +}
> > diff --git a/drivers/raw/octeontx2_ep/otx2_ep_enqdeq.h
> > b/drivers/raw/octeontx2_ep/otx2_ep_enqdeq.h
> > new file mode 100644
> > index 0000000..4c28283
> > --- /dev/null
> > +++ b/drivers/raw/octeontx2_ep/otx2_ep_enqdeq.h
> > @@ -0,0 +1,11 @@
> > +/* SPDX-License-Identifier: BSD-3-Clause
> > + * Copyright(C) 2019 Marvell International Ltd.
> > + */
> > +
> > +#ifndef _OTX2_EP_ENQDEQ_H_
> > +#define _OTX2_EP_ENQDEQ_H_
> > +
> > +#include <rte_byteorder.h>
> > +#include "otx2_ep_rawdev.h"
> > +
> > +#endif /* _OTX2_EP_ENQDEQ_H_ */
> > diff --git a/drivers/raw/octeontx2_ep/otx2_ep_rawdev.c
> > b/drivers/raw/octeontx2_ep/otx2_ep_rawdev.c
> > index 04b4fac..0c56609 100644
> > --- a/drivers/raw/octeontx2_ep/otx2_ep_rawdev.c
> > +++ b/drivers/raw/octeontx2_ep/otx2_ep_rawdev.c
> > @@ -17,6 +17,7 @@
> >
> >  #include "otx2_common.h"
> >  #include "otx2_ep_rawdev.h"
> > +#include "otx2_ep_vf.h"
> >
> >  static const struct rte_pci_id pci_sdp_vf_map[] = {
> >  	{
> > @@ -28,6 +29,152 @@
> >  	},
> >  };
> >
> > +/* SDP_VF default configuration */
> > +const struct sdp_config default_sdp_conf = {
> > +	/* IQ attributes */
> > +	.iq                        = {
> > +		.max_iqs           = SDP_VF_CFG_IO_QUEUES,
> > +		.instr_type        = SDP_VF_64BYTE_INSTR,
> > +		.pending_list_size = (SDP_VF_MAX_IQ_DESCRIPTORS *
> > +				      SDP_VF_CFG_IO_QUEUES),
> > +	},
> > +
> > +	/* OQ attributes */
> > +	.oq                        = {
> > +		.max_oqs           = SDP_VF_CFG_IO_QUEUES,
> > +		.info_ptr          = SDP_VF_OQ_INFOPTR_MODE,
> > +		.refill_threshold  = SDP_VF_OQ_REFIL_THRESHOLD,
> > +	},
> > +
> > +	.num_iqdef_descs           = SDP_VF_MAX_IQ_DESCRIPTORS,
> > +	.num_oqdef_descs           = SDP_VF_MAX_OQ_DESCRIPTORS,
> > +	.oqdef_buf_size            = SDP_VF_OQ_BUF_SIZE,
> > +
> > +};
> > +
> > +const struct sdp_config*
> > +sdp_get_defconf(struct sdp_device *sdp_dev __rte_unused)
> > +{
> > +	const struct sdp_config *default_conf = NULL;
> > +
> > +	default_conf = &default_sdp_conf;
> > +
> > +	return default_conf;
> > +}
> > +
> > +static int
> > +sdp_chip_specific_setup(struct sdp_device *sdpvf)
> > +{
> > +	struct rte_pci_device *pdev = sdpvf->pci_dev;
> > +	uint32_t dev_id = pdev->id.device_id;
> > +	int ret;
> > +
> > +	switch (dev_id) {
> > +	case PCI_DEVID_OCTEONTX2_EP_VF:
> > +		sdpvf->chip_id = PCI_DEVID_OCTEONTX2_EP_VF;
> > +		ret = sdp_vf_setup_device(sdpvf);
> > +
> > +		break;
> > +	default:
> > +		otx2_err("Unsupported device");
> > +		ret = -EINVAL;
> > +	}
> > +
> > +	if (!ret)
> > +		otx2_info("SDP dev_id[%d]", dev_id);
> > +
> > +	return ret;
> > +}
> > +
> > +/* SDP VF device initialization */
> > +static int
> > +sdp_vfdev_init(struct sdp_device *sdpvf)
> > +{
> > +	uint32_t rawdev_queues, q;
> > +
> > +	if (sdp_chip_specific_setup(sdpvf)) {
> > +		otx2_err("Chip specific setup failed");
> > +		goto setup_fail;
> > +	}
> > +
> > +	if (sdpvf->fn_list.setup_device_regs(sdpvf)) {
> > +		otx2_err("Failed to configure device registers");
> > +		goto setup_fail;
> > +	}
> > +
> > +	rawdev_queues = (uint32_t)(sdpvf->sriov_info.rings_per_vf);
> > +
> > +	/* Rawdev queues setup for enqueue/dequeue */
> > +	for (q = 0; q < rawdev_queues; q++) {
> > +		if (sdp_setup_iqs(sdpvf, q)) {
> > +			otx2_err("Failed to setup IQs");
> > +			goto iq_fail;
> > +		}
> > +	}
> > +	otx2_info("Total[%d] IQs setup", sdpvf->num_iqs);
> > +
> > +	for (q = 0; q < rawdev_queues; q++) {
> > +		if (sdp_setup_oqs(sdpvf, q)) {
> > +			otx2_err("Failed to setup OQs");
> > +			goto oq_fail;
> > +		}
> > +	}
> > +	otx2_info("Total [%d] OQs setup", sdpvf->num_oqs);
> > +
> > +	/* Enable IQ/OQ for this device */
> > +	sdpvf->fn_list.enable_io_queues(sdpvf);
> > +
> > +	/* Send OQ desc credits for OQs, credits are always
> > +	 * sent after the OQs are enabled.
> > +	 */
> > +	for (q = 0; q < rawdev_queues; q++) {
> > +		rte_write32(sdpvf->droq[q]->nb_desc,
> > +			    sdpvf->droq[q]->pkts_credit_reg);
> > +
> > +		rte_io_mb();
> > +		otx2_info("OQ[%d] dbells [%d]", q,
> > +		rte_read32(sdpvf->droq[q]->pkts_credit_reg));
> > +	}
> > +
> > +	rte_wmb();
> > +
> > +	otx2_info("SDP Device is Ready");
> > +
> > +	return 0;
> > +
> > +oq_fail:
> > +iq_fail:
> > +setup_fail:
> > +	return -ENOMEM;
> > +}
> > +
> > +static int
> > +sdp_rawdev_configure(const struct rte_rawdev *dev, rte_rawdev_obj_t
> > config)
> > +{
> > +	struct sdp_rawdev_info *app_info = (struct sdp_rawdev_info
> *)config;
> > +	struct sdp_device *sdpvf;
> > +
> > +	if (app_info == NULL) {
> > +		otx2_err("Application config info [NULL]");
> > +		return -EINVAL;
> > +	}
> > +
> > +	sdpvf = (struct sdp_device *)dev->dev_private;
> > +
> > +	sdpvf->conf = app_info->app_conf;
> > +	sdpvf->enqdeq_mpool = app_info->enqdeq_mpool;
> > +
> > +	sdp_vfdev_init(sdpvf);
> > +
> > +	return 0;
> > +
> > +}
> > +
> > +/* SDP VF endpoint rawdev ops */
> > +static const struct rte_rawdev_ops sdp_rawdev_ops = {
> > +	.dev_configure  = sdp_rawdev_configure,
> > +};
> > +
> >  static int
> >  otx2_sdp_rawdev_probe(struct rte_pci_driver *pci_drv __rte_unused,
> >  		      struct rte_pci_device *pci_dev)
> > @@ -66,6 +213,7 @@
> >  		return -ENOMEM;
> >  	}
> >
> > +	sdp_rawdev->dev_ops = &sdp_rawdev_ops;
> >  	sdp_rawdev->device = &pci_dev->device;
> >  	sdp_rawdev->driver_name = pci_dev->driver->driver.name;
> >
> > diff --git a/drivers/raw/octeontx2_ep/otx2_ep_rawdev.h
> > b/drivers/raw/octeontx2_ep/otx2_ep_rawdev.h
> > index 7ae7a08..bb36b6a 100644
> > --- a/drivers/raw/octeontx2_ep/otx2_ep_rawdev.h
> > +++ b/drivers/raw/octeontx2_ep/otx2_ep_rawdev.h
> > @@ -5,17 +5,449 @@
> >  #ifndef _OTX2_EP_RAWDEV_H_
> >  #define _OTX2_EP_RAWDEV_H_
> >
> > -#define PCI_DEVID_OCTEONTX2_EP_VF    0xB203  /* OCTEON TX2 EP
> mode
> > */
> > +#include <rte_byteorder.h>
> > +#include <rte_spinlock.h>
> > +
> > +
> > +/* Input Request Header format */
> > +struct sdp_instr_irh {
> > +	/* Request ID  */
> > +	uint64_t rid:16;
> > +
> > +	/* PCIe port to use for response */
> > +	uint64_t pcie_port:3;
> > +
> > +	/* Scatter indicator  1=scatter */
> > +	uint64_t scatter:1;
> > +
> > +	/* Size of Expected result OR no. of entries in scatter list */
> > +	uint64_t rlenssz:14;
> > +
> > +	/* Desired destination port for result */
> > +	uint64_t dport:6;
> > +
> > +	/* Opcode Specific parameters */
> > +	uint64_t param:8;
> > +
> > +	/* Opcode for the return packet  */
> > +	uint64_t opcode:16;
> > +};
> > +
> > +/* SDP 32B instruction format */
> > +struct sdp_instr_32B {
> > +	/* Pointer where the input data is available. */
> > +	uint64_t dptr;
> > +
> > +	/* SDP Instruction Header.  */
> > +	uint64_t ih;
> > +
> > +	/** Pointer where the response for a RAW mode packet
> > +	 *  will be written by OCTEON TX2.
> > +	 */
> > +	uint64_t rptr;
> > +
> > +	/* Input Request Header. Additional info about the input. */
> > +	uint64_t irh;
> > +};
> > +#define SDP_32B_INSTR_SIZE	(sizeof(sdp_instr_32B))
> > +
> > +/* SDP 64B instruction format */
> > +struct sdp_instr_64B {
> > +	/* Pointer where the input data is available. */
> > +	uint64_t dptr;
> > +
> > +	/* SDP Instruction Header. */
> > +	uint64_t ih;
> > +
> > +	/** Pointer where the response for a RAW mode packet
> > +	 * will be written by OCTEON TX2.
> > +	 */
> > +	uint64_t rptr;
> > +
> > +	/* Input Request Header. */
> > +	uint64_t irh;
> > +
> > +	/* Additional headers available in a 64-byte instruction. */
> > +	uint64_t exhdr[4];
> > +};
> > +#define SDP_64B_INSTR_SIZE	(sizeof(sdp_instr_64B))
> > +
> > +struct sdp_soft_instr {
> > +	/** Input data pointer. It is either pointing directly to input data
> > +	 *  or to a gather list.
> > +	 */
> > +	void *dptr;
> > +
> > +	/** Response from OCTEON TX2 comes at this address. It is either
> > +	 *  directlty pointing to output data buffer or to a scatter list.
> > +	 */
> > +	void *rptr;
> > +
> > +	/* The instruction header. All input commands have this field. */
> > +	struct sdp_instr_ih ih;
> > +
> > +	/* Input request header. */
> > +	struct sdp_instr_irh irh;
> > +
> > +	/** The PCI instruction to be sent to OCTEON TX2. This is stored in
> the
> > +	 *  instr to retrieve the physical address of buffers when instr is
> > +	 *  freed.
> > +	 */
> > +	struct sdp_instr_64B command;
> > +
> > +	/** If a gather list was allocated, this ptr points to the buffer used
> > +	 *  for the gather list. The gather list has to be 8B aligned, so this
> > +	 *  value may be different from dptr.
> > +	 */
> > +	void *gather_ptr;
> > +
> > +	/* Total data bytes transferred in the gather mode request. */
> > +	uint64_t gather_bytes;
> > +
> > +	/** If a scatter list was allocated, this ptr points to the buffer used
> > +	 *  for the scatter list. The scatter list has to be 8B aligned, so
> > +	 *  this value may be different from rptr.
> > +	 */
> > +	void *scatter_ptr;
> > +
> > +	/* Total data bytes to be received in the scatter mode request. */
> > +	uint64_t scatter_bytes;
> > +
> > +	/* IQ number to which this instruction has to be submitted. */
> > +	uint32_t q_no;
> > +
> > +	/* IQ instruction request type. */
> > +	uint32_t reqtype;
> > +};
> > +#define SDP_SOFT_INSTR_SIZE	(sizeof(sdp_soft_instr))
> > +
> > +/* SDP IQ request list */
> > +struct sdp_instr_list {
> > +	void *buf;
> > +	uint32_t reqtype;
> > +};
> > +#define SDP_IQREQ_LIST_SIZE	(sizeof(struct sdp_instr_list))
> > +
> > +/* Structure to define the configuration attributes for each Input queue.
> */
> > +struct sdp_iq_config {
> > +	/* Max number of IQs available */
> > +	uint16_t max_iqs;
> > +
> > +	/* Command size - 32 or 64 bytes */
> > +	uint16_t instr_type;
> > +
> > +	/* Pending list size, usually set to the sum of the size of all IQs */
> > +	uint32_t pending_list_size;
> > +};
> > +
> > +/** The instruction (input) queue.
> > + *  The input queue is used to post raw (instruction) mode data or packet
> data
> > + *  to OCTEON TX2 device from the host. Each IQ of a SDP EP VF device has
> > one
> > + *  such structure to represent it.
> > + */
> > +struct sdp_instr_queue {
> > +	/* A spinlock to protect access to the input ring.  */
> > +	rte_spinlock_t lock;
> > +	rte_spinlock_t post_lock;
> > +
> > +	struct sdp_device *sdp_dev;
> > +	rte_atomic64_t iq_flush_running;
> > +
> > +	uint32_t q_no;
> > +	uint32_t pkt_in_done;
> > +
> > +	/* Flag for 64 byte commands. */
> > +	uint32_t iqcmd_64B:1;
> > +	uint32_t rsvd:17;
> > +	uint32_t status:8;
> > +
> > +	/* Number of  descriptors in this ring. */
> > +	uint32_t nb_desc;
> > +
> > +	/* Input ring index, where the driver should write the next packet */
> > +	uint32_t host_write_index;
> > +
> > +	/* Input ring index, where the OCTEON TX2 should read the next
> > packet */
> > +	uint32_t otx_read_index;
> > +
> > +	/** This index aids in finding the window in the queue where
> OCTEON
> > TX2
> > +	 *  has read the commands.
> > +	 */
> > +	uint32_t flush_index;
> > +
> > +	/* This keeps track of the instructions pending in this queue. */
> > +	rte_atomic64_t instr_pending;
> > +
> > +	uint32_t reset_instr_cnt;
> > +
> > +	/* Pointer to the Virtual Base addr of the input ring. */
> > +	uint8_t *base_addr;
> > +
> > +	/* This IQ request list */
> > +	struct sdp_instr_list *req_list;
> > +
> > +	/* SDP doorbell register for the ring. */
> > +	void *doorbell_reg;
> > +
> > +	/* SDP instruction count register for this ring. */
> > +	void *inst_cnt_reg;
> > +
> > +	/* Number of instructions pending to be posted to OCTEON TX2. */
> > +	uint32_t fill_cnt;
> > +
> > +	/* DMA mapped base address of the input descriptor ring. */
> > +	uint64_t base_addr_dma;
> > +
> > +	/* Memory zone */
> > +	const struct rte_memzone *iq_mz;
> > +};
> > +
> > +/* DROQ packet format for application i/f. */
> > +struct sdp_droq_pkt {
> > +	/* DROQ packet data buffer pointer. */
> > +	uint8_t	 *data;
> > +
> > +	/* DROQ packet data length */
> > +	uint32_t len;
> > +
> > +	uint32_t misc;
> > +};
> > +
> > +/** Descriptor format.
> > + *  The descriptor ring is made of descriptors which have 2 64-bit values:
> > + *  -# Physical (bus) address of the data buffer.
> > + *  -# Physical (bus) address of a sdp_droq_info structure.
> > + *  The device DMA's incoming packets and its information at the address
> > + *  given by these descriptor fields.
> > + */
> > +struct sdp_droq_desc {
> > +	/* The buffer pointer */
> > +	uint64_t buffer_ptr;
> > +
> > +	/* The Info pointer */
> > +	uint64_t info_ptr;
> > +};
> > +#define SDP_DROQ_DESC_SIZE	(sizeof(struct sdp_droq_desc))
> > +
> > +/* Receive Header */
> > +union sdp_rh {
> > +	uint64_t rh64;
> > +};
> > +#define SDP_RH_SIZE (sizeof(union sdp_rh))
> > +
> > +/** Information about packet DMA'ed by OCTEON TX2.
> > + *  The format of the information available at Info Pointer after OCTEON
> TX2
> > + *  has posted a packet. Not all descriptors have valid information. Only
> > + *  the Info field of the first descriptor for a packet has information
> > + *  about the packet.
> > + */
> > +struct sdp_droq_info {
> > +	/* The Output Receive Header. */
> > +	union sdp_rh rh;
> > +
> > +	/* The Length of the packet. */
> > +	uint64_t length;
> > +};
> > +#define SDP_DROQ_INFO_SIZE	(sizeof(struct sdp_droq_info))
> > +
> > +/** Pointer to data buffer.
> > + *  Driver keeps a pointer to the data buffer that it made available to
> > + *  the OCTEON TX2 device. Since the descriptor ring keeps physical (bus)
> > + *  addresses, this field is required for the driver to keep track of
> > + *  the virtual address pointers.
> > + */
> > +struct sdp_recv_buffer {
> > +	/* Packet buffer, including meta data. */
> > +	void *buffer;
> > +
> > +	/* Data in the packet buffer. */
> > +	/* uint8_t *data; */
> > +};
> > +#define SDP_DROQ_RECVBUF_SIZE	(sizeof(struct sdp_recv_buffer))
> > +
> > +/* Structure to define the configuration attributes for each Output queue.
> */
> > +struct sdp_oq_config {
> > +	/* Max number of OQs available */
> > +	uint16_t max_oqs;
> > +
> > +	/* If set, the Output queue uses info-pointer mode. (Default: 1 ) */
> > +	uint16_t info_ptr;
> > +
> > +	/** The number of buffers that were consumed during packet
> > processing by
> > +	 *  the driver on this Output queue before the driver attempts to
> > +	 *  replenish the descriptor ring with new buffers.
> > +	 */
> > +	uint32_t refill_threshold;
> > +};
> > +
> > +/* The Descriptor Ring Output Queue(DROQ) structure. */
> > +struct sdp_droq {
> > +	/* A spinlock to protect access to this ring. */
> > +	rte_spinlock_t lock;
> > +
> > +	struct sdp_device *sdp_dev;
> > +	/* The 8B aligned descriptor ring starts at this address. */
> > +	struct sdp_droq_desc *desc_ring;
> > +
> > +	uint32_t q_no;
> > +	uint32_t last_pkt_count;
> > +
> > +	/* Driver should read the next packet at this index */
> > +	uint32_t read_idx;
> > +
> > +	/* OCTEON TX2 will write the next packet at this index */
> > +	uint32_t write_idx;
> > +
> > +	/* At this index, the driver will refill the descriptor's buffer */
> > +	uint32_t refill_idx;
> > +
> > +	/* Packets pending to be processed */
> > +	rte_atomic64_t pkts_pending;
> > +
> > +	/* Number of descriptors in this ring. */
> > +	uint32_t nb_desc;
> > +
> > +	/* The number of descriptors pending to refill. */
> > +	uint32_t refill_count;
> > +
> > +	uint32_t refill_threshold;
> > +
> > +	/* The 8B aligned info ptrs begin from this address. */
> > +	struct sdp_droq_info *info_list;
> > +
> > +	/* receive buffer list contains virtual addresses of the buffers. */
> > +	struct sdp_recv_buffer *recv_buf_list;
> > +
> > +	/* The size of each buffer pointed by the buffer pointer. */
> > +	uint32_t buffer_size;
> > +
> > +	/** Pointer to the mapped packet credit register.
> > +	 *  Host writes number of info/buffer ptrs available to this register
> > +	 */
> > +	void *pkts_credit_reg;
> > +
> > +	/** Pointer to the mapped packet sent register. OCTEON TX2 writes
> > the
> > +	 *  number of packets DMA'ed to host memory in this register.
> > +	 */
> > +	void *pkts_sent_reg;
> > +
> > +	/* DMA mapped address of the DROQ descriptor ring. */
> > +	size_t desc_ring_dma;
> > +
> > +	/* Info_ptr list is allocated at this virtual address. */
> > +	size_t info_base_addr;
> > +
> > +	/* DMA mapped address of the info list */
> > +	size_t info_list_dma;
> > +
> > +	/* Allocated size of info list. */
> > +	uint32_t info_alloc_size;
> > +
> > +	/* Memory zone **/
> > +	const struct rte_memzone *desc_ring_mz;
> > +	const struct rte_memzone *info_mz;
> > +};
> > +#define SDP_DROQ_SIZE		(sizeof(struct sdp_droq))
> > +
> > +/* IQ/OQ mask */
> > +struct sdp_io_enable {
> > +	uint64_t iq;
> > +	uint64_t oq;
> > +	uint64_t iq64B;
> > +};
> > +
> > +/* Structure to define the configuration. */
> > +struct sdp_config {
> > +	/* Input Queue attributes. */
> > +	struct sdp_iq_config iq;
> > +
> > +	/* Output Queue attributes. */
> > +	struct sdp_oq_config oq;
> > +
> > +	/* Num of desc for IQ rings */
> > +	uint32_t num_iqdef_descs;
> > +
> > +	/* Num of desc for OQ rings */
> > +	uint32_t num_oqdef_descs;
> > +
> > +	/* OQ buffer size */
> > +	uint32_t oqdef_buf_size;
> > +};
> > +
> > +/* Required functions for each VF device */
> > +struct sdp_fn_list {
> > +	void (*setup_iq_regs)(struct sdp_device *sdpvf, uint32_t q_no);
> > +	void (*setup_oq_regs)(struct sdp_device *sdpvf, uint32_t q_no);
> > +	int (*setup_device_regs)(struct sdp_device *sdpvf);
> > +	void (*enable_io_queues)(struct sdp_device *sdpvf);
> > +	void (*enable_iq)(struct sdp_device *sdpvf, uint32_t q_no);
> > +	void (*enable_oq)(struct sdp_device *sdpvf, uint32_t q_no);
> > +};
> > +
> > +/* SRIOV information */
> > +struct sdp_sriov_info {
> > +	/* Number of rings assigned to VF */
> > +	uint32_t rings_per_vf;
> > +
> > +	/* Number of VF devices enabled */
> > +	uint32_t num_vfs;
> > +};
> > +
> > +
> > +/* Information to be passed from application */
> > +struct sdp_rawdev_info {
> > +	struct rte_mempool *enqdeq_mpool;
> > +	const struct sdp_config *app_conf;
> > +};
> >
> >  /* SDP EP VF device */
> >  struct sdp_device {
> >  	/* PCI device pointer */
> >  	struct rte_pci_device *pci_dev;
> > +	uint16_t chip_id;
> > +	uint16_t pf_num;
> >  	uint16_t vf_num;
> >
> > +	/* This device's PCIe port used for traffic. */
> > +	uint16_t pcie_port;
> > +	uint32_t pkind;
> > +
> > +	/* The state of this device */
> > +	rte_atomic64_t status;
> > +
> >  	/* Memory mapped h/w address */
> >  	uint8_t *hw_addr;
> >
> > +	struct sdp_fn_list fn_list;
> > +
> > +	/* Num IQs */
> > +	uint32_t num_iqs;
> > +
> > +	/* The input instruction queues */
> > +	struct sdp_instr_queue
> > *instr_queue[SDP_VF_MAX_IOQS_PER_RAWDEV];
> > +
> > +	/* Num OQs */
> > +	uint32_t num_oqs;
> > +
> > +	/* The DROQ output queues  */
> > +	struct sdp_droq *droq[SDP_VF_MAX_IOQS_PER_RAWDEV];
> > +
> > +	/* IOQ data buffer pool */
> > +	struct rte_mempool *enqdeq_mpool;
> > +
> > +	/* IOQ mask */
> > +	struct sdp_io_enable io_qmask;
> > +
> > +	/* SR-IOV info */
> > +	struct sdp_sriov_info sriov_info;
> > +
> > +	/* Device configuration */
> > +	const struct sdp_config *conf;
> >  };
> >
> > +const struct sdp_config *sdp_get_defconf(struct sdp_device *sdp_dev);
> > +int sdp_setup_iqs(struct sdp_device *sdpvf, uint32_t iq_no);
> > +
> > +int sdp_setup_oqs(struct sdp_device *sdpvf, uint32_t oq_no);
> > +
> >  #endif /* _OTX2_EP_RAWDEV_H_ */
> > diff --git a/drivers/raw/octeontx2_ep/otx2_ep_vf.c
> > b/drivers/raw/octeontx2_ep/otx2_ep_vf.c
> > new file mode 100644
> > index 0000000..b6120eb
> > --- /dev/null
> > +++ b/drivers/raw/octeontx2_ep/otx2_ep_vf.c
> > @@ -0,0 +1,408 @@
> > +/* SPDX-License-Identifier: BSD-3-Clause
> > + * Copyright(C) 2019 Marvell International Ltd.
> > + */
> > +
> > +#include <rte_common.h>
> > +#include <rte_rawdev.h>
> > +#include <rte_rawdev_pmd.h>
> > +
> > +#include "otx2_common.h"
> > +#include "otx2_ep_rawdev.h"
> > +#include "otx2_ep_vf.h"
> > +
> > +static int
> > +sdp_vf_reset_iq(struct sdp_device *sdpvf, int q_no)
> > +{
> > +	uint64_t loop = SDP_VF_BUSY_LOOP_COUNT;
> > +	volatile uint64_t d64 = 0ull;
> > +
> > +	/* There is no RST for a ring.
> > +	 * Clear all registers one by one after disabling the ring
> > +	 */
> > +
> > +	otx2_write64(d64, sdpvf->hw_addr + SDP_VF_R_IN_ENABLE(q_no));
> > +	otx2_write64(d64, sdpvf->hw_addr +
> > SDP_VF_R_IN_INSTR_BADDR(q_no));
> > +	otx2_write64(d64, sdpvf->hw_addr +
> > SDP_VF_R_IN_INSTR_RSIZE(q_no));
> > +
> > +	d64 = 0xFFFFFFFF; /* ~0ull */
> > +	otx2_write64(d64, sdpvf->hw_addr +
> > SDP_VF_R_IN_INSTR_DBELL(q_no));
> > +	d64 = otx2_read64(sdpvf->hw_addr +
> > SDP_VF_R_IN_INSTR_DBELL(q_no));
> > +
> > +	while ((d64 != 0) && loop--) {
> > +		otx2_write64(d64, sdpvf->hw_addr +
> > +			     SDP_VF_R_IN_INSTR_DBELL(q_no));
> > +
> > +		rte_delay_ms(1);
> > +
> > +		d64 = otx2_read64(sdpvf->hw_addr +
> > +				  SDP_VF_R_IN_INSTR_DBELL(q_no));
> > +	}
> > +
> > +	loop = SDP_VF_BUSY_LOOP_COUNT;
> > +	d64 = otx2_read64(sdpvf->hw_addr + SDP_VF_R_IN_CNTS(q_no));
> > +	while ((d64 != 0) && loop--) {
> > +		otx2_write64(d64, sdpvf->hw_addr +
> > SDP_VF_R_IN_CNTS(q_no));
> > +
> > +		rte_delay_ms(1);
> > +
> > +		d64 = otx2_read64(sdpvf->hw_addr +
> > SDP_VF_R_IN_CNTS(q_no));
> > +	}
> > +
> > +	d64 = 0ull;
> > +	otx2_write64(d64, sdpvf->hw_addr +
> > SDP_VF_R_IN_INT_LEVELS(q_no));
> > +	otx2_write64(d64, sdpvf->hw_addr + SDP_VF_R_IN_PKT_CNT(q_no));
> > +	otx2_write64(d64, sdpvf->hw_addr +
> > SDP_VF_R_IN_BYTE_CNT(q_no));
> > +
> > +	return 0;
> > +}
> > +
> > +static int
> > +sdp_vf_reset_oq(struct sdp_device *sdpvf, int q_no)
> > +{
> > +	uint64_t loop = SDP_VF_BUSY_LOOP_COUNT;
> > +	volatile uint64_t d64 = 0ull;
> > +
> > +	otx2_write64(d64, sdpvf->hw_addr +
> > SDP_VF_R_OUT_ENABLE(q_no));
> > +
> > +	otx2_write64(d64, sdpvf->hw_addr +
> > SDP_VF_R_OUT_SLIST_BADDR(q_no));
> > +
> > +	otx2_write64(d64, sdpvf->hw_addr +
> > SDP_VF_R_OUT_SLIST_RSIZE(q_no));
> > +
> > +	d64 = 0xFFFFFFFF;
> > +	otx2_write64(d64, sdpvf->hw_addr +
> > SDP_VF_R_OUT_SLIST_DBELL(q_no));
> > +	d64 = otx2_read64(sdpvf->hw_addr +
> > SDP_VF_R_OUT_SLIST_DBELL(q_no));
> > +
> > +	while ((d64 != 0) && loop--) {
> > +		otx2_write64(d64, sdpvf->hw_addr +
> > +			     SDP_VF_R_OUT_SLIST_DBELL(q_no));
> > +
> > +		rte_delay_ms(1);
> > +
> > +		d64 = otx2_read64(sdpvf->hw_addr +
> > +				  SDP_VF_R_OUT_SLIST_DBELL(q_no));
> > +	}
> > +
> > +	loop = SDP_VF_BUSY_LOOP_COUNT;
> > +	d64 = otx2_read64(sdpvf->hw_addr + SDP_VF_R_OUT_CNTS(q_no));
> > +	while ((d64 != 0) && (loop--)) {
> > +		otx2_write64(d64, sdpvf->hw_addr +
> > SDP_VF_R_OUT_CNTS(q_no));
> > +
> > +		rte_delay_ms(1);
> > +
> > +		d64 = otx2_read64(sdpvf->hw_addr +
> > SDP_VF_R_OUT_CNTS(q_no));
> > +	}
> > +
> > +	d64 = 0ull;
> > +	otx2_write64(d64, sdpvf->hw_addr +
> > SDP_VF_R_OUT_INT_LEVELS(q_no));
> > +	otx2_write64(d64, sdpvf->hw_addr +
> > SDP_VF_R_OUT_PKT_CNT(q_no));
> > +	otx2_write64(d64, sdpvf->hw_addr +
> > SDP_VF_R_OUT_BYTE_CNT(q_no));
> > +
> > +	return 0;
> > +}
> > +
> > +static void
> > +sdp_vf_setup_global_iq_reg(struct sdp_device *sdpvf, int q_no)
> > +{
> > +	volatile uint64_t reg_val = 0ull;
> > +
> > +	/* Select ES, RO, NS, RDSIZE,DPTR Fomat#0 for IQs
> > +	 * IS_64B is by default enabled.
> > +	 */
> > +	reg_val = otx2_read64(sdpvf->hw_addr +
> > SDP_VF_R_IN_CONTROL(q_no));
> > +
> > +	reg_val |= SDP_VF_R_IN_CTL_RDSIZE;
> > +	reg_val |= SDP_VF_R_IN_CTL_IS_64B;
> > +	reg_val |= SDP_VF_R_IN_CTL_ESR;
> > +
> > +	otx2_write64(reg_val, sdpvf->hw_addr +
> > SDP_VF_R_IN_CONTROL(q_no));
> > +
> > +}
> > +
> > +static void
> > +sdp_vf_setup_global_oq_reg(struct sdp_device *sdpvf, int q_no)
> > +{
> > +	volatile uint64_t reg_val = 0ull;
> > +
> > +	reg_val = otx2_read64(sdpvf->hw_addr +
> > SDP_VF_R_OUT_CONTROL(q_no));
> > +
> > +	reg_val |= (SDP_VF_R_OUT_CTL_IMODE);
> > +
> > +	reg_val &= ~(SDP_VF_R_OUT_CTL_ROR_P);
> > +	reg_val &= ~(SDP_VF_R_OUT_CTL_NSR_P);
> > +	reg_val &= ~(SDP_VF_R_OUT_CTL_ROR_I);
> > +	reg_val &= ~(SDP_VF_R_OUT_CTL_NSR_I);
> > +	reg_val &= ~(SDP_VF_R_OUT_CTL_ES_I);
> > +	reg_val &= ~(SDP_VF_R_OUT_CTL_ROR_D);
> > +	reg_val &= ~(SDP_VF_R_OUT_CTL_NSR_D);
> > +	reg_val &= ~(SDP_VF_R_OUT_CTL_ES_D);
> > +
> > +	/* INFO/DATA ptr swap is required  */
> > +	reg_val |= (SDP_VF_R_OUT_CTL_ES_P);
> > +
> > +	otx2_write64(reg_val, sdpvf->hw_addr +
> > SDP_VF_R_OUT_CONTROL(q_no));
> > +
> > +}
> > +
> > +static int
> > +sdp_vf_reset_input_queues(struct sdp_device *sdpvf)
> > +{
> > +	uint32_t q_no = 0;
> > +
> > +	otx2_sdp_dbg("%s :", __func__);
> > +
> > +	for (q_no = 0; q_no < sdpvf->sriov_info.rings_per_vf; q_no++)
> > +		sdp_vf_reset_iq(sdpvf, q_no);
> > +
> > +	return 0;
> > +}
> > +
> > +static int
> > +sdp_vf_reset_output_queues(struct sdp_device *sdpvf)
> > +{
> > +	uint64_t q_no = 0ull;
> > +
> > +	otx2_sdp_dbg(" %s :", __func__);
> > +
> > +	for (q_no = 0; q_no < sdpvf->sriov_info.rings_per_vf; q_no++)
> > +		sdp_vf_reset_oq(sdpvf, q_no);
> > +
> > +	return 0;
> > +}
> > +
> > +static void
> > +sdp_vf_setup_global_input_regs(struct sdp_device *sdpvf)
> > +{
> > +	uint64_t q_no = 0ull;
> > +
> > +	sdp_vf_reset_input_queues(sdpvf);
> > +
> > +	for (q_no = 0; q_no < (sdpvf->sriov_info.rings_per_vf); q_no++)
> > +		sdp_vf_setup_global_iq_reg(sdpvf, q_no);
> > +}
> > +
> > +static void
> > +sdp_vf_setup_global_output_regs(struct sdp_device *sdpvf)
> > +{
> > +	uint32_t q_no;
> > +
> > +	sdp_vf_reset_output_queues(sdpvf);
> > +
> > +	for (q_no = 0; q_no < (sdpvf->sriov_info.rings_per_vf); q_no++)
> > +		sdp_vf_setup_global_oq_reg(sdpvf, q_no);
> > +
> > +}
> > +
> > +static int
> > +sdp_vf_setup_device_regs(struct sdp_device *sdpvf)
> > +{
> > +	sdp_vf_setup_global_input_regs(sdpvf);
> > +	sdp_vf_setup_global_output_regs(sdpvf);
> > +
> > +	return 0;
> > +}
> > +
> > +static void
> > +sdp_vf_setup_iq_regs(struct sdp_device *sdpvf, uint32_t iq_no)
> > +{
> > +	struct sdp_instr_queue *iq = sdpvf->instr_queue[iq_no];
> > +	volatile uint64_t reg_val = 0ull;
> > +
> > +	reg_val = otx2_read64(sdpvf->hw_addr +
> > SDP_VF_R_IN_CONTROL(iq_no));
> > +
> > +	/* Wait till IDLE to set to 1, not supposed to configure BADDR
> > +	 * as long as IDLE is 0
> > +	 */
> > +	if (!(reg_val & SDP_VF_R_IN_CTL_IDLE)) {
> > +		do {
> > +			reg_val = otx2_read64(sdpvf->hw_addr +
> > +					      SDP_VF_R_IN_CONTROL(iq_no));
> > +		} while (!(reg_val & SDP_VF_R_IN_CTL_IDLE));
> > +	}
> > +
> > +	/* Write the start of the input queue's ring and its size  */
> > +	otx2_write64(iq->base_addr_dma, sdpvf->hw_addr +
> > +		     SDP_VF_R_IN_INSTR_BADDR(iq_no));
> > +	otx2_write64(iq->nb_desc, sdpvf->hw_addr +
> > +		     SDP_VF_R_IN_INSTR_RSIZE(iq_no));
> > +
> > +	/* Remember the doorbell & instruction count register addr
> > +	 * for this queue
> > +	 */
> > +	iq->doorbell_reg = (uint8_t *) sdpvf->hw_addr +
> > +			   SDP_VF_R_IN_INSTR_DBELL(iq_no);
> > +	iq->inst_cnt_reg = (uint8_t *) sdpvf->hw_addr +
> > +			   SDP_VF_R_IN_CNTS(iq_no);
> > +
> > +	otx2_sdp_dbg("InstQ[%d]:dbell reg @ 0x%p instcnt_reg @ 0x%p",
> > +		     iq_no, iq->doorbell_reg, iq->inst_cnt_reg);
> > +
> > +	/* Store the current instrn counter(used in flush_iq calculation) */
> > +	iq->reset_instr_cnt = rte_read32(iq->inst_cnt_reg);
> > +
> > +	/* IN INTR_THRESHOLD is set to max(FFFFFFFF) which disable the IN
> > INTR
> > +	 * to raise
> > +	 */
> > +	reg_val = otx2_read64(sdpvf->hw_addr +
> > SDP_VF_R_IN_INT_LEVELS(iq_no));
> > +	reg_val = 0xffffffff;
> > +
> > +	otx2_write64(reg_val, sdpvf->hw_addr +
> > SDP_VF_R_IN_INT_LEVELS(iq_no));
> > +
> > +}
> > +
> > +static void
> > +sdp_vf_setup_oq_regs(struct sdp_device *sdpvf, uint32_t oq_no)
> > +{
> > +	volatile uint64_t reg_val = 0ull;
> > +	uint64_t oq_ctl = 0ull;
> > +
> > +	struct sdp_droq *droq = sdpvf->droq[oq_no];
> > +
> > +	/* Wait on IDLE to set to 1, supposed to configure BADDR
> > +	 * as log as IDLE is 0
> > +	 */
> > +	reg_val = otx2_read64(sdpvf->hw_addr +
> > SDP_VF_R_OUT_CONTROL(oq_no));
> > +
> > +	while (!(reg_val & SDP_VF_R_OUT_CTL_IDLE)) {
> > +		reg_val = otx2_read64(sdpvf->hw_addr +
> > +				      SDP_VF_R_OUT_CONTROL(oq_no));
> > +	}
> > +
> > +	otx2_write64(droq->desc_ring_dma, sdpvf->hw_addr +
> > +		     SDP_VF_R_OUT_SLIST_BADDR(oq_no));
> > +	otx2_write64(droq->nb_desc, sdpvf->hw_addr +
> > +		     SDP_VF_R_OUT_SLIST_RSIZE(oq_no));
> > +
> > +	oq_ctl = otx2_read64(sdpvf->hw_addr +
> > SDP_VF_R_OUT_CONTROL(oq_no));
> > +
> > +	/* Clear the ISIZE and BSIZE (22-0) */
> > +	oq_ctl &= ~(0x7fffffull);
> > +
> > +	/* Populate the BSIZE (15-0) */
> > +	oq_ctl |= (droq->buffer_size & 0xffff);
> > +
> > +	/* Populate ISIZE(22-16) */
> > +	oq_ctl |= ((SDP_RH_SIZE << 16) & 0x7fffff);
> > +	otx2_write64(oq_ctl, sdpvf->hw_addr +
> > SDP_VF_R_OUT_CONTROL(oq_no));
> > +
> > +	/* Mapped address of the pkt_sent and pkts_credit regs */
> > +	droq->pkts_sent_reg = (uint8_t *) sdpvf->hw_addr +
> > +			      SDP_VF_R_OUT_CNTS(oq_no);
> > +	droq->pkts_credit_reg = (uint8_t *) sdpvf->hw_addr +
> > +				SDP_VF_R_OUT_SLIST_DBELL(oq_no);
> > +
> > +	reg_val = otx2_read64(sdpvf->hw_addr +
> > SDP_VF_R_OUT_INT_LEVELS(oq_no));
> > +
> > +	/* Clear PKT_CNT register */
> > +	rte_write64(0xFFFFFFFFF, (uint8_t *)sdpvf->hw_addr +
> > +		    SDP_VF_R_OUT_PKT_CNT(oq_no));
> > +
> > +	/* Clear the OQ doorbell  */
> > +	rte_write32(0xFFFFFFFF, droq->pkts_credit_reg);
> > +	while ((rte_read32(droq->pkts_credit_reg) != 0ull)) {
> > +		rte_write32(0xFFFFFFFF, droq->pkts_credit_reg);
> > +		rte_delay_ms(1);
> > +	}
> > +	otx2_sdp_dbg("SDP_R[%d]_credit:%x", oq_no,
> > +		     rte_read32(droq->pkts_credit_reg));
> > +
> > +	/* Clear the OQ_OUT_CNTS doorbell  */
> > +	reg_val = rte_read32(droq->pkts_sent_reg);
> > +	rte_write32((uint32_t)reg_val, droq->pkts_sent_reg);
> > +
> > +	otx2_sdp_dbg("SDP_R[%d]_sent: %x", oq_no,
> > +		     rte_read32(droq->pkts_sent_reg));
> > +
> > +	while (((rte_read32(droq->pkts_sent_reg)) != 0ull)) {
> > +		reg_val = rte_read32(droq->pkts_sent_reg);
> > +		rte_write32((uint32_t)reg_val, droq->pkts_sent_reg);
> > +		rte_delay_ms(1);
> > +	}
> > +
> > +}
> > +
> > +static void
> > +sdp_vf_enable_iq(struct sdp_device *sdpvf, uint32_t q_no)
> > +{
> > +	volatile uint64_t reg_val = 0ull;
> > +	uint64_t loop = SDP_VF_BUSY_LOOP_COUNT;
> > +
> > +	/* Resetting doorbells during IQ enabling also to handle abrupt
> > +	 * guest reboot. IQ reset does not clear the doorbells.
> > +	 */
> > +	otx2_write64(0xFFFFFFFF, sdpvf->hw_addr +
> > +		     SDP_VF_R_IN_INSTR_DBELL(q_no));
> > +
> > +	while (((otx2_read64(sdpvf->hw_addr +
> > +		 SDP_VF_R_IN_INSTR_DBELL(q_no))) != 0ull) && loop--) {
> > +
> > +		rte_delay_ms(1);
> > +	}
> > +
> > +	reg_val = otx2_read64(sdpvf->hw_addr +
> > SDP_VF_R_IN_ENABLE(q_no));
> > +	reg_val |= 0x1ull;
> > +
> > +	otx2_write64(reg_val, sdpvf->hw_addr +
> > SDP_VF_R_IN_ENABLE(q_no));
> > +
> > +	otx2_info("IQ[%d] enable done", q_no);
> > +
> > +}
> > +
> > +static void
> > +sdp_vf_enable_oq(struct sdp_device *sdpvf, uint32_t q_no)
> > +{
> > +	volatile uint64_t reg_val = 0ull;
> > +
> > +	reg_val = otx2_read64(sdpvf->hw_addr +
> > SDP_VF_R_OUT_ENABLE(q_no));
> > +	reg_val |= 0x1ull;
> > +	otx2_write64(reg_val, sdpvf->hw_addr +
> > SDP_VF_R_OUT_ENABLE(q_no));
> > +
> > +	otx2_info("OQ[%d] enable done", q_no);
> > +}
> > +
> > +static void
> > +sdp_vf_enable_io_queues(struct sdp_device *sdpvf)
> > +{
> > +	uint32_t q_no = 0;
> > +
> > +	for (q_no = 0; q_no < sdpvf->num_iqs; q_no++)
> > +		sdp_vf_enable_iq(sdpvf, q_no);
> > +
> > +	for (q_no = 0; q_no < sdpvf->num_oqs; q_no++)
> > +		sdp_vf_enable_oq(sdpvf, q_no);
> > +}
> > +
> > +int
> > +sdp_vf_setup_device(struct sdp_device *sdpvf)
> > +{
> > +	uint64_t reg_val = 0ull;
> > +
> > +	/* If application doesn't provide its conf, use driver default conf */
> > +	if (sdpvf->conf == NULL) {
> > +		sdpvf->conf = sdp_get_defconf(sdpvf);
> > +		if (sdpvf->conf == NULL) {
> > +			otx2_err("SDP VF default config not found");
> > +			return -ENOMEM;
> > +		}
> > +		otx2_info("Default config is used");
> > +	}
> > +
> > +	/* Get IOQs (RPVF] count */
> > +	reg_val = otx2_read64(sdpvf->hw_addr +
> > SDP_VF_R_IN_CONTROL(0));
> > +
> > +	sdpvf->sriov_info.rings_per_vf = ((reg_val >>
> > SDP_VF_R_IN_CTL_RPVF_POS)
> > +					  & SDP_VF_R_IN_CTL_RPVF_MASK);
> > +
> > +	otx2_info("SDP RPVF: %d", sdpvf->sriov_info.rings_per_vf);
> > +
> > +	sdpvf->fn_list.setup_iq_regs       = sdp_vf_setup_iq_regs;
> > +	sdpvf->fn_list.setup_oq_regs       = sdp_vf_setup_oq_regs;
> > +	sdpvf->fn_list.setup_device_regs   = sdp_vf_setup_device_regs;
> > +	sdpvf->fn_list.enable_io_queues    = sdp_vf_enable_io_queues;
> > +	sdpvf->fn_list.enable_iq           = sdp_vf_enable_iq;
> > +	sdpvf->fn_list.enable_oq           = sdp_vf_enable_oq;
> > +
> > +
> > +	return 0;
> > +
> > +}
> > +
> > diff --git a/drivers/raw/octeontx2_ep/otx2_ep_vf.h
> > b/drivers/raw/octeontx2_ep/otx2_ep_vf.h
> > new file mode 100644
> > index 0000000..974f856
> > --- /dev/null
> > +++ b/drivers/raw/octeontx2_ep/otx2_ep_vf.h
> > @@ -0,0 +1,10 @@
> > +/* SPDX-License-Identifier: BSD-3-Clause
> > + * Copyright(C) 2019 Marvell International Ltd.
> > + */
> > +#ifndef _OTX2_EP_VF_H_
> > +#define _OTX2_EP_VF_H_
> > +int
> > +sdp_vf_setup_device(struct sdp_device *sdpvf);
> > +
> > +#endif /*_OTX2_EP_VF_H_ */
> > +
> > --
> > 1.8.3.1


  reply	other threads:[~2020-01-07  6:46 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-01-06 12:07 [dpdk-dev] [PATCH v3 0/6] OCTEON TX2 End Point Driver Mahipal Challa
2020-01-06 12:07 ` [dpdk-dev] [PATCH v3 1/6] raw/octeontx2_ep: add build infra and device probe Mahipal Challa
2020-01-06 12:07 ` [dpdk-dev] [PATCH v3 2/6] raw/octeontx2_ep: add device configuration Mahipal Challa
2020-01-07  6:01   ` Gavin Hu
2020-01-07  6:46     ` Mahipal Challa [this message]
2020-01-06 12:07 ` [dpdk-dev] [PATCH v3 3/6] raw/octeontx2_ep: add device uninitialization Mahipal Challa
2020-01-06 12:07 ` [dpdk-dev] [PATCH v3 4/6] raw/octeontx2_ep: add enqueue operation Mahipal Challa
2020-01-07  5:55   ` Gavin Hu
2020-01-07  7:03     ` Mahipal Challa
2020-01-06 12:07 ` [dpdk-dev] [PATCH v3 5/6] raw/octeontx2_ep: add dequeue operation Mahipal Challa
2020-01-07  5:42   ` Gavin Hu
2020-01-07  7:18     ` Mahipal Challa
2020-01-06 12:07 ` [dpdk-dev] [PATCH v3 6/6] raw/octeontx2_ep: add driver self test Mahipal Challa
2020-01-07  2:42   ` Gavin Hu
2020-01-07  4:14     ` Mahipal Challa

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=MWHPR18MB1376CDA55C9F340C0433D429BE3F0@MWHPR18MB1376.namprd18.prod.outlook.com \
    --to=mchalla@marvell.com \
    --cc=Gavin.Hu@arm.com \
    --cc=dev@dpdk.org \
    --cc=jerinj@marvell.com \
    --cc=nd@arm.com \
    --cc=pathreya@marvell.com \
    --cc=snilla@marvell.com \
    --cc=venkatn@marvell.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).