From: "Liu, Mingxia" <mingxia.liu@intel.com>
To: "Xing, Beilei" <beilei.xing@intel.com>,
"Wu, Jingjing" <jingjing.wu@intel.com>
Cc: "dev@dpdk.org" <dev@dpdk.org>, "Wang, Xiao W" <xiao.w.wang@intel.com>
Subject: RE: [PATCH v4 05/13] net/cpfl: support hairpin queue setup and release
Date: Tue, 30 May 2023 02:27:19 +0000 [thread overview]
Message-ID: <PH0PR11MB5877B83A2846A33779196F4CEC4B9@PH0PR11MB5877.namprd11.prod.outlook.com> (raw)
In-Reply-To: <20230526073850.101079-6-beilei.xing@intel.com>
> -----Original Message-----
> From: Xing, Beilei <beilei.xing@intel.com>
> Sent: Friday, May 26, 2023 3:39 PM
> To: Wu, Jingjing <jingjing.wu@intel.com>
> Cc: dev@dpdk.org; Liu, Mingxia <mingxia.liu@intel.com>; Xing, Beilei
> <beilei.xing@intel.com>; Wang, Xiao W <xiao.w.wang@intel.com>
> Subject: [PATCH v4 05/13] net/cpfl: support hairpin queue setup and release
>
> From: Beilei Xing <beilei.xing@intel.com>
>
> Support hairpin Rx/Tx queue setup and release.
>
> Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
> Signed-off-by: Mingxia Liu <mingxia.liu@intel.com>
> Signed-off-by: Beilei Xing <beilei.xing@intel.com>
> ---
> drivers/net/cpfl/cpfl_ethdev.c | 6 +
> drivers/net/cpfl/cpfl_ethdev.h | 11 +
> drivers/net/cpfl/cpfl_rxtx.c | 353 +++++++++++++++++++++++-
> drivers/net/cpfl/cpfl_rxtx.h | 36 +++
> drivers/net/cpfl/cpfl_rxtx_vec_common.h | 4 +
> 5 files changed, 409 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/net/cpfl/cpfl_ethdev.c b/drivers/net/cpfl/cpfl_ethdev.c index
> 40b4515539..b17c538ec2 100644
> --- a/drivers/net/cpfl/cpfl_ethdev.c
> +++ b/drivers/net/cpfl/cpfl_ethdev.c
> @@ -879,6 +879,10 @@ cpfl_dev_close(struct rte_eth_dev *dev)
> struct cpfl_adapter_ext *adapter = CPFL_ADAPTER_TO_EXT(vport-
> >adapter);
>
> cpfl_dev_stop(dev);
> + if (cpfl_vport->p2p_mp) {
> + rte_mempool_free(cpfl_vport->p2p_mp);
> + cpfl_vport->p2p_mp = NULL;
> + }
>
> if (!adapter->base.is_rx_singleq && !adapter->base.is_tx_singleq)
> cpfl_p2p_queue_grps_del(vport);
> @@ -922,6 +926,8 @@ static const struct eth_dev_ops cpfl_eth_dev_ops = {
> .xstats_get_names = cpfl_dev_xstats_get_names,
> .xstats_reset = cpfl_dev_xstats_reset,
> .hairpin_cap_get = cpfl_hairpin_cap_get,
> + .rx_hairpin_queue_setup = cpfl_rx_hairpin_queue_setup,
> + .tx_hairpin_queue_setup = cpfl_tx_hairpin_queue_setup,
> };
>
> +int
> +cpfl_rx_hairpin_queue_setup(struct rte_eth_dev *dev, uint16_t queue_idx,
> + uint16_t nb_desc,
> + const struct rte_eth_hairpin_conf *conf) {
> + struct cpfl_vport *cpfl_vport = (struct cpfl_vport *)dev->data-
> >dev_private;
> + struct idpf_vport *vport = &cpfl_vport->base;
> + struct idpf_adapter *adapter_base = vport->adapter;
> + uint16_t logic_qid = cpfl_vport->nb_p2p_rxq;
> + struct cpfl_rxq_hairpin_info *hairpin_info;
> + struct cpfl_rx_queue *cpfl_rxq;
> + struct idpf_rx_queue *bufq1 = NULL;
> + struct idpf_rx_queue *rxq;
> + uint16_t peer_port, peer_q;
> + uint16_t qid;
> + int ret;
> +
> + if (vport->rxq_model == VIRTCHNL2_QUEUE_MODEL_SINGLE) {
> + PMD_INIT_LOG(ERR, "Only spilt queue model supports hairpin
> queue.");
> + return -EINVAL;
> + }
> +
> + if (conf->peer_count != 1) {
> + PMD_INIT_LOG(ERR, "Can't support Rx hairpin queue peer
> count %d", conf->peer_count);
> + return -EINVAL;
> + }
> +
> + peer_port = conf->peers[0].port;
> + peer_q = conf->peers[0].queue;
> +
> + if (nb_desc % CPFL_ALIGN_RING_DESC != 0 ||
> + nb_desc > CPFL_MAX_RING_DESC ||
> + nb_desc < CPFL_MIN_RING_DESC) {
> + PMD_INIT_LOG(ERR, "Number (%u) of receive descriptors is
> invalid", nb_desc);
> + return -EINVAL;
> + }
> +
> + /* Free memory if needed */
> + if (dev->data->rx_queues[queue_idx]) {
> + cpfl_rx_queue_release(dev->data->rx_queues[queue_idx]);
> + dev->data->rx_queues[queue_idx] = NULL;
> + }
> +
> + /* Setup Rx description queue */
> + cpfl_rxq = rte_zmalloc_socket("cpfl hairpin rxq",
> + sizeof(struct cpfl_rx_queue),
> + RTE_CACHE_LINE_SIZE,
> + SOCKET_ID_ANY);
> + if (!cpfl_rxq) {
> + PMD_INIT_LOG(ERR, "Failed to allocate memory for rx queue
> data structure");
> + return -ENOMEM;
> + }
> +
> + rxq = &cpfl_rxq->base;
> + hairpin_info = &cpfl_rxq->hairpin_info;
> + rxq->nb_rx_desc = nb_desc * 2;
> + rxq->queue_id = cpfl_hw_qid_get(cpfl_vport->p2p_q_chunks_info-
> >rx_start_qid, logic_qid);
> + rxq->port_id = dev->data->port_id;
> + rxq->adapter = adapter_base;
> + rxq->rx_buf_len = CPFL_P2P_MBUF_SIZE - RTE_PKTMBUF_HEADROOM;
> + hairpin_info->hairpin_q = true;
> + hairpin_info->peer_txp = peer_port;
> + hairpin_info->peer_txq_id = peer_q;
> +
> + if (conf->manual_bind != 0)
> + cpfl_vport->p2p_manual_bind = true;
> + else
> + cpfl_vport->p2p_manual_bind = false;
> +
> + if (cpfl_vport->p2p_rx_bufq == NULL) {
> + bufq1 = rte_zmalloc_socket("hairpin rx bufq1",
> + sizeof(struct idpf_rx_queue),
> + RTE_CACHE_LINE_SIZE,
> + SOCKET_ID_ANY);
> + if (!bufq1) {
> + PMD_INIT_LOG(ERR, "Failed to allocate memory for
> hairpin Rx buffer queue 1.");
> + ret = -ENOMEM;
> + goto err_alloc_bufq1;
> + }
> + qid = 2 * logic_qid;
> + ret = cpfl_rx_hairpin_bufq_setup(dev, bufq1, qid, nb_desc);
> + if (ret) {
> + PMD_INIT_LOG(ERR, "Failed to setup hairpin Rx buffer
> queue 1");
> + ret = -EINVAL;
> + goto err_setup_bufq1;
> + }
> + cpfl_vport->p2p_rx_bufq = bufq1;
> + }
> +
> + rxq->bufq1 = cpfl_vport->p2p_rx_bufq;
> + rxq->bufq2 = NULL;
> +
> + cpfl_vport->nb_p2p_rxq++;
> + rxq->q_set = true;
> + dev->data->rx_queues[queue_idx] = cpfl_rxq;
> +
> + return 0;
> +
> +err_setup_bufq1:
> + rte_free(bufq1);
> +err_alloc_bufq1:
> + rte_free(rxq);
[Liu, Mingxia] Here should free cpfl_rxq, right?
> +
> + return ret;
> +}
> +
> +int
> +cpfl_tx_hairpin_queue_setup(struct rte_eth_dev *dev, uint16_t queue_idx,
> + uint16_t nb_desc,
> + const struct rte_eth_hairpin_conf *conf) {
> + struct cpfl_vport *cpfl_vport =
> + (struct cpfl_vport *)dev->data->dev_private;
> +
> + struct idpf_vport *vport = &cpfl_vport->base;
> + struct idpf_adapter *adapter_base = vport->adapter;
> + uint16_t logic_qid = cpfl_vport->nb_p2p_txq;
> + struct cpfl_txq_hairpin_info *hairpin_info;
> + struct idpf_hw *hw = &adapter_base->hw;
> + struct cpfl_tx_queue *cpfl_txq;
> + struct idpf_tx_queue *txq, *cq;
> + const struct rte_memzone *mz;
> + uint32_t ring_size;
> + uint16_t peer_port, peer_q;
> +
> + if (vport->txq_model == VIRTCHNL2_QUEUE_MODEL_SINGLE) {
> + PMD_INIT_LOG(ERR, "Only spilt queue model supports hairpin
> queue.");
> + return -EINVAL;
> + }
> +
> + if (conf->peer_count != 1) {
> + PMD_INIT_LOG(ERR, "Can't support Tx hairpin queue peer
> count %d", conf->peer_count);
> + return -EINVAL;
> + }
> +
> + peer_port = conf->peers[0].port;
> + peer_q = conf->peers[0].queue;
> +
> + if (nb_desc % CPFL_ALIGN_RING_DESC != 0 ||
> + nb_desc > CPFL_MAX_RING_DESC ||
> + nb_desc < CPFL_MIN_RING_DESC) {
> + PMD_INIT_LOG(ERR, "Number (%u) of transmit descriptors is
> invalid",
> + nb_desc);
> + return -EINVAL;
> + }
> +
> + /* Free memory if needed. */
> + if (dev->data->tx_queues[queue_idx]) {
> + cpfl_tx_queue_release(dev->data->tx_queues[queue_idx]);
> + dev->data->tx_queues[queue_idx] = NULL;
> + }
> +
> + /* Allocate the TX queue data structure. */
> + cpfl_txq = rte_zmalloc_socket("cpfl hairpin txq",
> + sizeof(struct cpfl_tx_queue),
> + RTE_CACHE_LINE_SIZE,
> + SOCKET_ID_ANY);
> + if (!cpfl_txq) {
> + PMD_INIT_LOG(ERR, "Failed to allocate memory for tx queue
> structure");
> + return -ENOMEM;
> + }
> +
> + txq = &cpfl_txq->base;
> + hairpin_info = &cpfl_txq->hairpin_info;
> + /* Txq ring length should be 2 times of Tx completion queue size. */
> + txq->nb_tx_desc = nb_desc * 2;
> + txq->queue_id = cpfl_hw_qid_get(cpfl_vport->p2p_q_chunks_info-
> >tx_start_qid, logic_qid);
> + txq->port_id = dev->data->port_id;
> + hairpin_info->hairpin_q = true;
> + hairpin_info->peer_rxp = peer_port;
> + hairpin_info->peer_rxq_id = peer_q;
> +
> + if (conf->manual_bind != 0)
> + cpfl_vport->p2p_manual_bind = true;
> + else
> + cpfl_vport->p2p_manual_bind = false;
> +
> + /* Always Tx hairpin queue allocates Tx HW ring */
> + ring_size = RTE_ALIGN(txq->nb_tx_desc * CPFL_P2P_DESC_LEN,
> + CPFL_DMA_MEM_ALIGN);
> + mz = rte_eth_dma_zone_reserve(dev, "hairpin_tx_ring", logic_qid,
> + ring_size + CPFL_P2P_RING_BUF,
> + CPFL_RING_BASE_ALIGN,
> + dev->device->numa_node);
> + if (!mz) {
> + PMD_INIT_LOG(ERR, "Failed to reserve DMA memory for TX");
> + rte_free(txq);
[Liu, Mingxia] Here should free cpfl_txq, right?
> + return -ENOMEM;
> + }
> +
> + txq->tx_ring_phys_addr = mz->iova;
> + txq->desc_ring = mz->addr;
> + txq->mz = mz;
> +
> + cpfl_tx_hairpin_descq_reset(txq);
> + txq->qtx_tail = hw->hw_addr +
> + cpfl_hw_qtail_get(cpfl_vport->p2p_q_chunks_info-
> >tx_qtail_start,
> + logic_qid, cpfl_vport->p2p_q_chunks_info-
> >tx_qtail_spacing);
> + txq->ops = &def_txq_ops;
> +
> + if (cpfl_vport->p2p_tx_complq == NULL) {
> + cq = rte_zmalloc_socket("cpfl hairpin cq",
> + sizeof(struct idpf_tx_queue),
> + RTE_CACHE_LINE_SIZE,
> + dev->device->numa_node);
> + if (!cq) {
> + PMD_INIT_LOG(ERR, "Failed to allocate memory for tx
> queue structure");
[Liu, Mingxia] Before returning, should free some resource, such as free cpfl_txq, right?
> + return -ENOMEM;
> + }
> +
> + cq->nb_tx_desc = nb_desc;
> + cq->queue_id = cpfl_hw_qid_get(cpfl_vport-
> >p2p_q_chunks_info->tx_compl_start_qid,
> + 0);
> + cq->port_id = dev->data->port_id;
> +
> + /* Tx completion queue always allocates the HW ring */
> + ring_size = RTE_ALIGN(cq->nb_tx_desc * CPFL_P2P_DESC_LEN,
> + CPFL_DMA_MEM_ALIGN);
> + mz = rte_eth_dma_zone_reserve(dev, "hairpin_tx_compl_ring",
> logic_qid,
> + ring_size + CPFL_P2P_RING_BUF,
> + CPFL_RING_BASE_ALIGN,
> + dev->device->numa_node);
> + if (!mz) {
> + PMD_INIT_LOG(ERR, "Failed to reserve DMA memory
> for TX completion queue");
> + rte_free(txq);
[Liu, Mingxia]Here should free cpfl_txq, right?In addition, should cq resource be released?
next prev parent reply other threads:[~2023-05-30 2:27 UTC|newest]
Thread overview: 164+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-04-21 6:50 [PATCH 00/10] add hairpin queue support beilei.xing
2023-04-21 6:50 ` [PATCH 01/10] net/cpfl: refine structures beilei.xing
2023-04-21 6:50 ` [PATCH 02/10] net/cpfl: support hairpin queue capbility get beilei.xing
2023-04-21 6:50 ` [PATCH 03/10] common/idpf: support queue groups add/delete beilei.xing
2023-04-24 8:48 ` Liu, Mingxia
2023-04-24 8:49 ` Liu, Mingxia
2023-05-19 5:36 ` Xing, Beilei
2023-04-21 6:50 ` [PATCH 04/10] net/cpfl: add haipin queue group during vpotr init beilei.xing
2023-04-24 8:55 ` Liu, Mingxia
2023-05-19 5:36 ` Xing, Beilei
2023-04-21 6:50 ` [PATCH 05/10] net/cpfl: support hairpin queue setup and release beilei.xing
2023-04-21 6:50 ` [PATCH 06/10] net/cpfl: support hairpin queue configuration beilei.xing
2023-04-24 9:48 ` Liu, Mingxia
2023-05-19 5:43 ` Xing, Beilei
2023-04-21 6:50 ` [PATCH 07/10] net/cpfl: support hairpin queue start/stop beilei.xing
2023-04-21 6:50 ` [PATCH 08/10] net/cpfl: enable write back based on ITR expire beilei.xing
2023-04-21 6:50 ` [PATCH 09/10] net/cpfl: support peer ports get beilei.xing
2023-04-21 6:50 ` [PATCH 10/10] net/cpfl: support hairpin bind/unbind beilei.xing
2023-05-19 5:10 ` [PATCH v2 00/10] add hairpin queue support beilei.xing
2023-05-19 5:10 ` [PATCH v2 01/10] net/cpfl: refine structures beilei.xing
2023-05-19 5:10 ` [PATCH v2 02/10] net/cpfl: support hairpin queue capbility get beilei.xing
2023-05-19 5:10 ` [PATCH v2 03/10] common/idpf: support queue groups add/delete beilei.xing
2023-05-19 5:10 ` [PATCH v2 04/10] net/cpfl: add haipin queue group during vport init beilei.xing
2023-05-19 5:10 ` [PATCH v2 04/10] net/cpfl: add haipin queue group during vpotr init beilei.xing
2023-05-19 5:10 ` [PATCH v2 05/10] net/cpfl: support hairpin queue setup and release beilei.xing
2023-05-19 5:10 ` [PATCH v2 06/10] net/cpfl: support hairpin queue configuration beilei.xing
2023-05-19 5:10 ` [PATCH v2 07/10] net/cpfl: support hairpin queue start/stop beilei.xing
2023-05-19 5:10 ` [PATCH v2 08/10] net/cpfl: enable write back based on ITR expire beilei.xing
2023-05-19 5:10 ` [PATCH v2 09/10] net/cpfl: support peer ports get beilei.xing
2023-05-19 5:10 ` [PATCH v2 10/10] net/cpfl: support hairpin bind/unbind beilei.xing
2023-05-19 7:31 ` [PATCH v3 00/10] net/cpfl: add hairpin queue support beilei.xing
2023-05-19 7:31 ` [PATCH v3 01/10] net/cpfl: refine structures beilei.xing
2023-05-19 7:31 ` [PATCH v3 02/10] net/cpfl: support hairpin queue capbility get beilei.xing
2023-05-24 14:30 ` Wu, Jingjing
2023-05-19 7:31 ` [PATCH v3 03/10] common/idpf: support queue groups add/delete beilei.xing
2023-05-19 7:31 ` [PATCH v3 04/10] net/cpfl: add haipin queue group during vport init beilei.xing
2023-05-24 14:38 ` Wu, Jingjing
2023-05-19 7:31 ` [PATCH v3 05/10] net/cpfl: support hairpin queue setup and release beilei.xing
2023-05-24 9:01 ` Liu, Mingxia
2023-05-26 3:46 ` Xing, Beilei
2023-05-25 3:58 ` Wu, Jingjing
2023-05-26 3:52 ` Xing, Beilei
2023-05-19 7:31 ` [PATCH v3 06/10] net/cpfl: support hairpin queue configuration beilei.xing
2023-05-19 7:31 ` [PATCH v3 07/10] net/cpfl: support hairpin queue start/stop beilei.xing
2023-05-25 4:12 ` Wu, Jingjing
2023-05-19 7:31 ` [PATCH v3 08/10] net/cpfl: enable write back based on ITR expire beilei.xing
2023-05-25 4:17 ` Wu, Jingjing
2023-05-19 7:31 ` [PATCH v3 09/10] net/cpfl: support peer ports get beilei.xing
2023-05-25 5:26 ` Wu, Jingjing
2023-05-19 7:31 ` [PATCH v3 10/10] net/cpfl: support hairpin bind/unbind beilei.xing
2023-05-26 7:38 ` [PATCH v4 00/13] net/cpfl: add hairpin queue support beilei.xing
2023-05-26 7:38 ` [PATCH v4 01/13] net/cpfl: refine structures beilei.xing
2023-05-26 7:38 ` [PATCH v4 02/13] common/idpf: support queue groups add/delete beilei.xing
2023-05-26 7:38 ` [PATCH v4 03/13] net/cpfl: add haipin queue group during vport init beilei.xing
2023-05-26 7:38 ` [PATCH v4 04/13] net/cpfl: support hairpin queue capbility get beilei.xing
2023-05-26 7:38 ` [PATCH v4 05/13] net/cpfl: support hairpin queue setup and release beilei.xing
2023-05-30 2:27 ` Liu, Mingxia [this message]
2023-05-30 2:49 ` Liu, Mingxia
2023-05-31 10:53 ` Xing, Beilei
2023-05-26 7:38 ` [PATCH v4 06/13] common/idpf: add queue config API beilei.xing
2023-05-26 7:38 ` [PATCH v4 07/13] net/cpfl: support hairpin queue configuration beilei.xing
2023-05-26 7:38 ` [PATCH v4 08/13] common/idpf: add switch queue API beilei.xing
2023-05-26 7:38 ` [PATCH v4 09/13] net/cpfl: support hairpin queue start/stop beilei.xing
2023-05-30 3:30 ` Liu, Mingxia
2023-05-31 10:53 ` Xing, Beilei
2023-05-26 7:38 ` [PATCH v4 10/13] common/idpf: add irq map config API beilei.xing
2023-05-26 7:38 ` [PATCH v4 11/13] net/cpfl: enable write back based on ITR expire beilei.xing
2023-05-26 7:38 ` [PATCH v4 12/13] net/cpfl: support peer ports get beilei.xing
2023-05-26 7:38 ` [PATCH v4 13/13] net/cpfl: support hairpin bind/unbind beilei.xing
2023-05-30 3:59 ` Liu, Mingxia
2023-05-31 10:54 ` Xing, Beilei
2023-05-31 10:18 ` [PATCH v5 00/13] net/cpfl: add hairpin queue support beilei.xing
2023-05-31 10:18 ` [PATCH v5 01/13] net/cpfl: refine structures beilei.xing
2023-05-31 10:18 ` [PATCH v5 02/13] common/idpf: support queue groups add/delete beilei.xing
2023-05-31 10:18 ` [PATCH v5 03/13] net/cpfl: add haipin queue group during vport init beilei.xing
2023-05-31 10:18 ` [PATCH v5 04/13] net/cpfl: support hairpin queue capbility get beilei.xing
2023-05-31 10:18 ` [PATCH v5 05/13] net/cpfl: support hairpin queue setup and release beilei.xing
2023-05-31 10:18 ` [PATCH v5 06/13] common/idpf: add queue config API beilei.xing
2023-05-31 10:18 ` [PATCH v5 07/13] net/cpfl: support hairpin queue configuration beilei.xing
2023-05-31 10:18 ` [PATCH v5 08/13] common/idpf: add switch queue API beilei.xing
2023-05-31 10:18 ` [PATCH v5 09/13] net/cpfl: support hairpin queue start/stop beilei.xing
2023-05-31 10:18 ` [PATCH v5 10/13] common/idpf: add irq map config API beilei.xing
2023-05-31 10:18 ` [PATCH v5 11/13] net/cpfl: enable write back based on ITR expire beilei.xing
2023-05-31 10:18 ` [PATCH v5 12/13] net/cpfl: support peer ports get beilei.xing
2023-05-31 10:18 ` [PATCH v5 13/13] net/cpfl: support hairpin bind/unbind beilei.xing
2023-05-31 10:25 ` [PATCH v6 00/13] net/cpfl: add hairpin queue support beilei.xing
2023-05-31 10:25 ` [PATCH v6 01/13] net/cpfl: refine structures beilei.xing
2023-05-31 10:25 ` [PATCH v6 02/13] common/idpf: support queue groups add/delete beilei.xing
2023-05-31 10:25 ` [PATCH v6 03/13] net/cpfl: add haipin queue group during vport init beilei.xing
2023-05-31 10:25 ` [PATCH v6 04/13] net/cpfl: support hairpin queue capbility get beilei.xing
2023-05-31 10:25 ` [PATCH v6 05/13] net/cpfl: support hairpin queue setup and release beilei.xing
2023-05-31 10:25 ` [PATCH v6 06/13] common/idpf: add queue config API beilei.xing
2023-05-31 10:25 ` [PATCH v6 07/13] net/cpfl: support hairpin queue configuration beilei.xing
2023-05-31 10:25 ` [PATCH v6 08/13] common/idpf: add switch queue API beilei.xing
2023-05-31 10:25 ` [PATCH v6 09/13] net/cpfl: support hairpin queue start/stop beilei.xing
2023-05-31 10:25 ` [PATCH v6 10/13] common/idpf: add irq map config API beilei.xing
2023-05-31 10:25 ` [PATCH v6 11/13] net/cpfl: enable write back based on ITR expire beilei.xing
2023-05-31 10:25 ` [PATCH v6 12/13] net/cpfl: support peer ports get beilei.xing
2023-05-31 10:25 ` [PATCH v6 13/13] net/cpfl: support hairpin bind/unbind beilei.xing
2023-05-31 13:04 ` [PATCH v7 00/14] net/cpfl: add hairpin queue support beilei.xing
2023-05-31 13:04 ` [PATCH v7 01/14] net/cpfl: refine structures beilei.xing
2023-05-31 13:04 ` [PATCH v7 02/14] common/idpf: support queue groups add/delete beilei.xing
2023-05-31 13:04 ` [PATCH v7 03/14] net/cpfl: add haipin queue group during vport init beilei.xing
2023-05-31 13:04 ` [PATCH v7 04/14] net/cpfl: support hairpin queue capbility get beilei.xing
2023-05-31 13:04 ` [PATCH v7 05/14] net/cpfl: support hairpin queue setup and release beilei.xing
2023-05-31 13:04 ` [PATCH v7 06/14] common/idpf: add queue config API beilei.xing
2023-05-31 13:04 ` [PATCH v7 07/14] net/cpfl: support hairpin queue configuration beilei.xing
2023-05-31 13:04 ` [PATCH v7 08/14] common/idpf: add switch queue API beilei.xing
2023-05-31 13:04 ` [PATCH v7 09/14] net/cpfl: support hairpin queue start/stop beilei.xing
2023-05-31 13:04 ` [PATCH v7 10/14] common/idpf: add irq map config API beilei.xing
2023-05-31 13:04 ` [PATCH v7 11/14] net/cpfl: enable write back based on ITR expire beilei.xing
2023-05-31 13:04 ` [PATCH v7 12/14] net/cpfl: support peer ports get beilei.xing
2023-05-31 13:04 ` [PATCH v7 13/14] net/cpfl: support hairpin bind/unbind beilei.xing
2023-05-31 13:04 ` [PATCH v7 14/14] doc: update the doc of CPFL PMD beilei.xing
2023-06-05 6:17 ` [PATCH v8 00/14] net/cpfl: add hairpin queue support beilei.xing
2023-06-05 6:17 ` [PATCH v8 01/14] net/cpfl: refine structures beilei.xing
2023-06-05 6:17 ` [PATCH v8 02/14] common/idpf: support queue groups add/delete beilei.xing
2023-06-05 6:17 ` [PATCH v8 03/14] net/cpfl: add haipin queue group during vport init beilei.xing
2023-06-05 8:35 ` Wu, Jingjing
2023-06-05 8:53 ` Xing, Beilei
2023-06-05 6:17 ` [PATCH v8 04/14] net/cpfl: support hairpin queue capbility get beilei.xing
2023-06-05 6:17 ` [PATCH v8 05/14] net/cpfl: support hairpin queue setup and release beilei.xing
2023-06-05 6:17 ` [PATCH v8 06/14] common/idpf: add queue config API beilei.xing
2023-06-05 6:17 ` [PATCH v8 07/14] net/cpfl: support hairpin queue configuration beilei.xing
2023-06-05 6:17 ` [PATCH v8 08/14] common/idpf: add switch queue API beilei.xing
2023-06-05 6:17 ` [PATCH v8 09/14] net/cpfl: support hairpin queue start/stop beilei.xing
2023-06-05 6:17 ` [PATCH v8 10/14] common/idpf: add irq map config API beilei.xing
2023-06-05 6:17 ` [PATCH v8 11/14] net/cpfl: enable write back based on ITR expire beilei.xing
2023-06-05 6:17 ` [PATCH v8 12/14] net/cpfl: support peer ports get beilei.xing
2023-06-05 11:22 ` Wu, Jingjing
2023-06-05 6:17 ` [PATCH v8 13/14] net/cpfl: support hairpin bind/unbind beilei.xing
2023-06-05 6:17 ` [PATCH v8 14/14] doc: update the doc of CPFL PMD beilei.xing
2023-06-05 9:06 ` [PATCH v9 00/14] net/cpfl: add hairpin queue support beilei.xing
2023-06-05 9:06 ` [PATCH v9 01/14] net/cpfl: refine structures beilei.xing
2023-06-05 9:06 ` [PATCH v9 02/14] common/idpf: support queue groups add/delete beilei.xing
2023-06-05 9:06 ` [PATCH v9 03/14] net/cpfl: add haipin queue group during vport init beilei.xing
2023-06-05 9:06 ` [PATCH v9 04/14] net/cpfl: support hairpin queue capbility get beilei.xing
2023-06-05 9:06 ` [PATCH v9 05/14] net/cpfl: support hairpin queue setup and release beilei.xing
2023-06-05 9:06 ` [PATCH v9 06/14] common/idpf: add queue config API beilei.xing
2023-06-05 9:06 ` [PATCH v9 07/14] net/cpfl: support hairpin queue configuration beilei.xing
2023-06-05 9:06 ` [PATCH v9 08/14] common/idpf: add switch queue API beilei.xing
2023-06-05 9:06 ` [PATCH v9 09/14] net/cpfl: support hairpin queue start/stop beilei.xing
2023-06-05 9:06 ` [PATCH v9 10/14] common/idpf: add irq map config API beilei.xing
2023-06-05 9:06 ` [PATCH v9 11/14] net/cpfl: enable write back based on ITR expire beilei.xing
2023-06-05 9:06 ` [PATCH v9 12/14] net/cpfl: support peer ports get beilei.xing
2023-06-05 9:06 ` [PATCH v9 13/14] net/cpfl: support hairpin bind/unbind beilei.xing
2023-06-05 9:06 ` [PATCH v9 14/14] doc: update the doc of CPFL PMD beilei.xing
2023-06-06 10:03 ` [PATCH v10 00/14] net/cpfl: add hairpin queue support beilei.xing
2023-06-06 6:40 ` Wu, Jingjing
2023-06-07 7:16 ` Zhang, Qi Z
2023-06-06 10:03 ` [PATCH v10 01/14] net/cpfl: refine structures beilei.xing
2023-06-06 10:03 ` [PATCH v10 02/14] common/idpf: support queue groups add/delete beilei.xing
2023-06-06 10:03 ` [PATCH v10 03/14] net/cpfl: add haipin queue group during vport init beilei.xing
2023-06-06 10:03 ` [PATCH v10 04/14] net/cpfl: support hairpin queue capbility get beilei.xing
2023-06-06 10:03 ` [PATCH v10 05/14] net/cpfl: support hairpin queue setup and release beilei.xing
2023-06-06 10:03 ` [PATCH v10 06/14] common/idpf: add queue config API beilei.xing
2023-06-06 10:03 ` [PATCH v10 07/14] net/cpfl: support hairpin queue configuration beilei.xing
2023-06-06 10:03 ` [PATCH v10 08/14] common/idpf: add switch queue API beilei.xing
2023-06-06 10:03 ` [PATCH v10 09/14] net/cpfl: support hairpin queue start/stop beilei.xing
2023-06-06 10:03 ` [PATCH v10 10/14] common/idpf: add irq map config API beilei.xing
2023-06-06 10:03 ` [PATCH v10 11/14] net/cpfl: enable write back based on ITR expire beilei.xing
2023-06-06 10:03 ` [PATCH v10 12/14] net/cpfl: support peer ports get beilei.xing
2023-06-06 10:03 ` [PATCH v10 13/14] net/cpfl: support hairpin bind/unbind beilei.xing
2023-06-06 10:03 ` [PATCH v10 14/14] doc: update the doc of CPFL PMD beilei.xing
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=PH0PR11MB5877B83A2846A33779196F4CEC4B9@PH0PR11MB5877.namprd11.prod.outlook.com \
--to=mingxia.liu@intel.com \
--cc=beilei.xing@intel.com \
--cc=dev@dpdk.org \
--cc=jingjing.wu@intel.com \
--cc=xiao.w.wang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).