From: "Lin, Xueqin" <xueqin.lin@intel.com>
To: "Lin, Xueqin" <xueqin.lin@intel.com>,
"Tang, Yaqi" <yaqi.tang@intel.com>,
"dts@dpdk.org" <dts@dpdk.org>
Cc: "Tang, Yaqi" <yaqi.tang@intel.com>
Subject: RE: [dts][PATCH V3] test_plans/cvl_switch_filter_qinq_test_plan: cvl support l4 for qinq switch filter
Date: Wed, 19 Jan 2022 03:06:55 +0000 [thread overview]
Message-ID: <SJ0PR11MB559918CF5CD3434F87AE6FAE94599@SJ0PR11MB5599.namprd11.prod.outlook.com> (raw)
In-Reply-To: <SJ0PR11MB5599DCC449B9A9A6751FA65C94589@SJ0PR11MB5599.namprd11.prod.outlook.com>
> -----Original Message-----
> From: Lin, Xueqin <xueqin.lin@intel.com>
> Sent: Tuesday, January 18, 2022 1:31 PM
> To: Tang, Yaqi <yaqi.tang@intel.com>; dts@dpdk.org
> Cc: Tang, Yaqi <yaqi.tang@intel.com>
> Subject: RE: [dts][PATCH V3] test_plans/cvl_switch_filter_qinq_test_plan: cvl
> support l4 for qinq switch filter
>
> Why created new test plan for this QINQ protocol?
> Suggest not include below description, could descript this test plan inlcudes
> which features, not list test case.
> If add new test case in future, need to change below too? Not make sense.
>
> +The test plan includes six test cases, such as MAC_QINQ_IPV4,
> > MAC_QINQ_IPV6, MAC_QINQ_IPV4_UDP, MAC_QINQ_IPV4_TCP,
> > MAC_QINQ_IPV6_UDP, MAC_QINQ_IPV6_TCP.
>
>
> > -----Original Message-----
> > From: Yaqi Tang <yaqi.tang@intel.com>
> > Sent: Tuesday, January 18, 2022 6:44 PM
> > To: dts@dpdk.org
> > Cc: Tang, Yaqi <yaqi.tang@intel.com>
> > Subject: [dts][PATCH V3] test_plans/cvl_switch_filter_qinq_test_plan:
> > cvl support l4 for qinq switch filter
> >
> > CVL support l4 for QinQ switch filter in PF driver is by dst MAC +
> > outer VLAN id
> > + inner VLAN id + dst IP + dst port, and port can support as eth /
> > + vlan / vlan / IP
> > / tcp|udp.
> >
> > Signed-off-by: Yaqi Tang <yaqi.tang@intel.com>
> > Tested-by: Yaqi Tang < yaqi.tang@intel.com>
> > ---
> > .../cvl_switch_filter_qinq_test_plan.rst | 689 ++++++++++++++++++
> > 1 file changed, 689 insertions(+)
> > create mode 100644 test_plans/cvl_switch_filter_qinq_test_plan.rst
> >
> > diff --git a/test_plans/cvl_switch_filter_qinq_test_plan.rst
> > b/test_plans/cvl_switch_filter_qinq_test_plan.rst
> > new file mode 100644
> > index 00000000..54404af0
> > --- /dev/null
> > +++ b/test_plans/cvl_switch_filter_qinq_test_plan.rst
> > @@ -0,0 +1,689 @@
> > +.. Copyright (c) <2021>, Intel Corporation
> > + All rights reserved.
> > +
> > + Redistribution and use in source and binary forms, with or without
> > + modification, are permitted provided that the following conditions
> > + are met:
> > +
> > + - Redistributions of source code must retain the above copyright
> > + notice, this list of conditions and the following disclaimer.
> > +
> > + - Redistributions in binary form must reproduce the above copyright
> > + notice, this list of conditions and the following disclaimer in
> > + the documentation and/or other materials provided with the
> > + distribution.
> > +
> > + - Neither the name of Intel Corporation nor the names of its
> > + contributors may be used to endorse or promote products derived
> > + from this software without specific prior written permission.
> > +
> > + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> > CONTRIBUTORS
> > + "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT
> NOT
> > + LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
> FITNESS
> > + FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> > + COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
> > INDIRECT,
> > + INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
> > + (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
> GOODS
> > OR
> > + SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
> > + HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
> > CONTRACT,
> > + STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
> > + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
> > ADVISED
> > + OF THE POSSIBILITY OF SUCH DAMAGE.
> > +
> > +================================
> > +CVL Switch Filter QINQ Test Plan
> > +================================
> > +
> > +Description
> > +===========
> > +The test plan includes six test cases, such as MAC_QINQ_IPV4,
> > MAC_QINQ_IPV6, MAC_QINQ_IPV4_UDP, MAC_QINQ_IPV4_TCP,
> > MAC_QINQ_IPV6_UDP, MAC_QINQ_IPV6_TCP.
> > +* Enable QINQ switch filter for IPv4/IPv6, IPv4 + TCP/UDP in
> > +non-pipeline
> > mode.
> > +* Enable QINQ switch filter for IPv6 + TCP/UDP in pipeline mode.
> > +CVL support l4 for QinQ switch filter in PF driver is by dst MAC +
> > +outer VLAN
> > id + inner VLAN id + dst IP + dst port, and port can support as eth /
> > vlan / vlan / IP / tcp|udp.
> > +
> > +Prerequisites
> > +=============
> > +
> > +Hardware
> > +--------
> > +Supportted NICs: columbiaville_25g/columbiaville_100g
> > +
> > +Software
> > +--------
> > +dpdk: http://dpdk.org/git/dpdk
> > +scapy: http://www.secdev.org/projects/scapy/
> > +
> > +General Set Up
> > +--------------
> > +1. Copy specific ice package to /lib/firmware/updates/intel/ice/ddp/ice.pkg,
> > + then load driver::
> > +
> > + # cp ice_comms-1.3.31.0.pkg /lib/firmware/updates/intel/ice/ddp/ice.pkg
Not list this version comms package for the test, other newer version should also support.
> > + # rmmod ice
> > + # insmod ice.ko
> > +
> > +2. Compile DPDK::
> > +
> > + # CC=gcc meson --werror -Denable_kmods=True -Dlibdir=lib
> > + --default-
> > library=static x86_64-native-linuxapp-gcc
> > + # ninja -C x86_64-native-linuxapp-gcc -j 110
> > +
> > +3. Get the pci device id and interface of DUT and tester::
> > +
> > + # ./usertools/dpdk-devbind.py -s
> > +
> > + 0000:3b:00.0 'Ethernet Controller E810-C for SFP 1593'
> > + if=ens785f0 drv=ice
> > unused=vfio-pci
> > + 0000:af:00.0 'Ethernet Controller XXV710 for 25GbE SFP28 158b'
> > if=ens260f0 drv=i40e unused=vfio-pci
> > +
> > +4. Bind the DUT port to dpdk::
> > +
> > + # ./usertools/dpdk-devbind.py -b vfio-pci 0000:3b:00.0
> > +
> > +Test Case
> > +=========
> > +
> > +Common Steps
> > +------------
> > +1. Launch the userland ``testpmd`` application on DUT as follows::
> > +
> > + # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xf -n 4 -a
> > 0000:3b:00.0 -- -i --txq=16 --rxq=16
Use template format for the whole test plan.
Testpmd parameter setup are different when testing non-pipeline and pipeline mode, not same.
> > +
> > +2. Set verbose::
> > +
> > + testpmd> set verbose 1
> > +
> > +3. Set fwd engine and start::
> > +
> > + testpmd> set fwd rxonly
> > + testpmd> start
> > +
> > +#Non-pipeline mode
> > +
> > +Test Case 1: MAC_QINQ_IPV4
> > +--------------------------
> > +The test case enable QINQ switch filter for IPv4 in non-pipeline
> > +mode, and
> > port can support as dst MAC + outer VLAN id + inner VLAN id + IPv4.
> > +
> > +Test Steps
> > +~~~~~~~~~~
> > +1. Validate a rule::
> > +
> > + testpmd> flow validate 0 ingress pattern eth dst is
> > + 00:11:22:33:44:55 /
> > vlan tci is 2 / vlan tci is 1 / ipv4 src is 192.168.1.1 dst is
> > 192.168.1.2 / end actions queue index 2 / end
> > +
> > + Get the message::
> > +
> > + Flow rule validated
> > +
> > +2. Create a rule and list rules::
> > +
> > + testpmd> flow create 0 ingress pattern eth dst is
> > + 00:11:22:33:44:55 / vlan
> > tci is 2 / vlan tci is 1 / ipv4 src is 192.168.1.1 dst is 192.168.1.2
> > / end actions queue index 2 / end
> > +
> > + Get the message::
> > +
> > + Flow rule #0 created
> > +
> > +3. Check the flow list::
> > +
> > + testpmd> flow list 0
> > +
> > + ID Group Prio Attr Rule
> > + 0 0 0 i-- ETH VLAN VLAN IPV4 => QUEUE
> > +
> > +4. Send matched packet in scapy on tester, check the DUT received
> > +this packet
> > and the action is right.
> > +
> > +Tester::
> > +
> > + >>>
> > sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x
> > 81 00)/Dot1Q(vlan=0x1,type=0x0800)/IP(src="192.168.1.1",
> > dst="192.168.1.2")/("X"*80)],iface="ens260f0",count=1)
> > +
> > +DUT::
> > +
> > + testpmd> port 0/queue 2: received 1 packets
> > + src=A4:BF:01:4D:6F:32 - dst=00:11:22:33:44:55 - type=0x8100 -
> > + length=122 -
> > nb_segs=1 - RSS hash=0x26878aad - RSS queue=0x2 - hw ptype: L2_ETHER
> > L3_IPV4_EXT_UNKNOWN L4_NONFRAG - sw ptype: L2_ETHER_VLAN
> > INNER_L2_ETHER_VLAN INNER_L3_IPV4 - l2_len=18 - inner_l2_len=4 -
> > inner_l3_len=20 - Receive queue=0x2
> > + ol_flags: RTE_MBUF_F_RX_RSS_HASH RTE_MBUF_F_RX_L4_CKSUM_GOOD
> > RTE_MBUF_F_RX_IP_CKSUM_GOOD
> > RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD
> > +
> > +5. Send mismatched packet in scapy on tester, check the DUT received
> > +this
> > packet and the action is not right.
> > +
> > +Tester::
> > +
> > + >>>
> > sendp([Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x
> > 81 00)/Dot1Q(vlan=0x1,type=0x0800)/IP(src="192.168.1.1",
> > dst="192.168.1.2")/("X"*80)],iface="ens260f0",count=1)
> > +
> > +DUT::
> > +
> > + testpmd> port 0/queue 13: received 1 packets
> > + src=A4:BF:01:4D:6F:32 - dst=00:11:22:33:44:33 - type=0x8100 -
> > + length=122 -
> > nb_segs=1 - RSS hash=0x26878aad - RSS queue=0xd - hw ptype: L2_ETHER
> > L3_IPV4_EXT_UNKNOWN L4_NONFRAG - sw ptype: L2_ETHER_VLAN
> > INNER_L2_ETHER_VLAN INNER_L3_IPV4 - l2_len=18 - inner_l2_len=4 -
> > inner_l3_len=20 - Receive queue=0xd
> > + ol_flags: RTE_MBUF_F_RX_RSS_HASH RTE_MBUF_F_RX_L4_CKSUM_GOOD
> > RTE_MBUF_F_RX_IP_CKSUM_GOOD
> > RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD
> > +
> > +Tester::
> > +
> > + >>>
> > sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x
> > 81 00)/Dot1Q(vlan=0x1,type=0x0800)/IP(src="192.168.1.1",
> > dst="192.168.1.2")/("X"*80)],iface="ens260f0",count=1)
> > +
> > +DUT::
> > +
> > + testpmd> port 0/queue 13: received 1 packets
> > + src=A4:BF:01:4D:6F:32 - dst=00:11:22:33:44:55 - type=0x8100 -
> > + length=122 -
> > nb_segs=1 - RSS hash=0x26878aad - RSS queue=0xd - hw ptype: L2_ETHER
> > L3_IPV4_EXT_UNKNOWN L4_NONFRAG - sw ptype: L2_ETHER_VLAN
> > INNER_L2_ETHER_VLAN INNER_L3_IPV4 - l2_len=18 - inner_l2_len=4 -
> > inner_l3_len=20 - Receive queue=0xd
> > + ol_flags: RTE_MBUF_F_RX_RSS_HASH RTE_MBUF_F_RX_L4_CKSUM_GOOD
> > RTE_MBUF_F_RX_IP_CKSUM_GOOD
> > RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD
> > +
> > +Tester::
> > +
> > + >>>
> > sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x
> > 81 00)/Dot1Q(vlan=0x2,type=0x0800)/IP(src="192.168.1.1",
> > dst="192.168.1.2")/("X"*80)],iface="ens260f0",count=1)
> > +
> > +DUT::
> > +
> > + testpmd> port 0/queue 13: received 1 packets
> > + src=A4:BF:01:4D:6F:32 - dst=00:11:22:33:44:55 - type=0x8100 -
> > + length=122 -
> > nb_segs=1 - RSS hash=0x26878aad - RSS queue=0xd - hw ptype: L2_ETHER
> > L3_IPV4_EXT_UNKNOWN L4_NONFRAG - sw ptype: L2_ETHER_VLAN
> > INNER_L2_ETHER_VLAN INNER_L3_IPV4 - l2_len=18 - inner_l2_len=4 -
> > inner_l3_len=20 - Receive queue=0xd
> > + ol_flags: RTE_MBUF_F_RX_RSS_HASH RTE_MBUF_F_RX_L4_CKSUM_GOOD
> > RTE_MBUF_F_RX_IP_CKSUM_GOOD
> > RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD
> > +
> > +Tester::
> > +
> > + >>>
> > sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x
> > 81 00)/Dot1Q(vlan=0x1,type=0x0800)/IP(src="192.168.1.3",
> > dst="192.168.1.2")/("X"*80)],iface="ens260f0",count=1)
> > +
> > +DUT::
> > +
> > + testpmd> port 0/queue 10: received 1 packets
> > + src=A4:BF:01:4D:6F:32 - dst=00:11:22:33:44:55 - type=0x8100 -
> > + length=122 -
> > nb_segs=1 - RSS hash=0xc99a75ba - RSS queue=0xa - hw ptype: L2_ETHER
> > L3_IPV4_EXT_UNKNOWN L4_NONFRAG - sw ptype: L2_ETHER_VLAN
> > INNER_L2_ETHER_VLAN INNER_L3_IPV4 - l2_len=18 - inner_l2_len=4 -
> > inner_l3_len=20 - Receive queue=0xa
> > + ol_flags: RTE_MBUF_F_RX_RSS_HASH RTE_MBUF_F_RX_L4_CKSUM_GOOD
> > RTE_MBUF_F_RX_IP_CKSUM_GOOD
> > RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD
> > +
> > +6. Destroy a rule and list rules::
> > +
> > + testpmd> flow destroy 0 rule 0
> > +
> > + Get the message::
> > +
> > + Flow rule #0 destroyed
> > +
> > +7. Check the flow list::
> > +
> > + testpmd> flow list 0
> > +
> > + Check the rule not exists in the list.
> > + Send matched packets in step 4, check the action is not right.
> > +
> > +Test Case 2: MAC_QINQ_IPV6
> > +--------------------------
> > +The test case enable QINQ switch filter for IPv6 in non-pipeline
> > +mode, and
> > port can support as dst MAC + outer VLAN id + inner VLAN id + IPv6.
> > +
> > +Test Steps
> > +~~~~~~~~~~
> > +1. Validate a rule::
> > +
> > + testpmd> flow validate 0 ingress pattern eth dst is
> > + 00:11:22:33:44:55 /
> > vlan tci is 2 / vlan tci is 1 / ipv6 dst is
> > CDCD:910A:2222:5498:8475:1111:3900:2020 / end actions rss queues 2 3
> > end / end
> > +
> > + Get the message::
> > +
> > + Flow rule validated
> > +
> > +2. Create a rule and list rules::
> > +
> > + testpmd> flow create 0 ingress pattern eth dst is
> > + 00:11:22:33:44:55 / vlan
> > tci is 2 / vlan tci is 1 / ipv6 dst is
> > CDCD:910A:2222:5498:8475:1111:3900:2020
> > / end actions rss queues 2 3 end / end
> > +
> > + Get the message::
> > +
> > + Flow rule #0 created
> > +
> > +3. Check the flow list::
> > +
> > + testpmd> flow list 0
> > +
> > + ID Group Prio Attr Rule
> > + 0 0 0 i-- ETH VLAN VLAN IPV6 => RSS
> > +
> > +4. Send matched packet in scapy on tester, check the DUT received
> > +this packet
> > and the action is right.
> > +
> > +Tester::
> > +
> > + >>>
> > sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x
> > 81
> >
> 00)/Dot1Q(vlan=0x1,type=0x86DD)/IPv6(dst="CDCD:910A:2222:5498:8475:11
> > 11:3900:2020")/("X"*80)],iface="ens260f0",count=1)
> > +
> > +DUT::
> > +
> > + testpmd> port 0/queue 2: received 1 packets
> > + src=00:00:00:00:00:00 - dst=00:11:22:33:44:55 - type=0x8100 -
> > + length=142 -
> > nb_segs=1 - RSS hash=0xb0c13d2c - RSS queue=0x2 - hw ptype: L2_ETHER
> > L3_IPV6_EXT_UNKNOWN L4_NONFRAG - sw ptype: L2_ETHER_VLAN
> > INNER_L2_ETHER_VLAN INNER_L3_IPV6 - l2_len=18 - inner_l2_len=4 -
> > inner_l3_len=40 - Receive queue=0x2
> > + ol_flags: RTE_MBUF_F_RX_RSS_HASH RTE_MBUF_F_RX_L4_CKSUM_GOOD
> > RTE_MBUF_F_RX_IP_CKSUM_GOOD
> > RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD
> > +
> > +5. Send mismatched packet in scapy on tester, check the DUT received
> > +this
> > packet and the action is not right.
> > +
> > +Tester::
> > +
> > + >>>
> > sendp([Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x
> > 81
> >
> 00)/Dot1Q(vlan=0x1,type=0x86DD)/IPv6(dst="CDCD:910A:2222:5498:8475:11
> > 11:3900:2020")/("X"*80)],iface="ens260f0",count=1)
> > +
> > +DUT::
> > +
> > + testpmd> port 0/queue 12: received 1 packets
> > + src=00:00:00:00:00:00 - dst=00:11:22:33:44:33 - type=0x8100 -
> > + length=142 -
> > nb_segs=1 - RSS hash=0xb0c13d2c - RSS queue=0xc - hw ptype: L2_ETHER
> > L3_IPV6_EXT_UNKNOWN L4_NONFRAG - sw ptype: L2_ETHER_VLAN
> > INNER_L2_ETHER_VLAN INNER_L3_IPV6 - l2_len=18 - inner_l2_len=4 -
> > inner_l3_len=40 - Receive queue=0xc
> > + ol_flags: RTE_MBUF_F_RX_RSS_HASH RTE_MBUF_F_RX_L4_CKSUM_GOOD
> > RTE_MBUF_F_RX_IP_CKSUM_GOOD
> > RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD
> > +
> > +Tester::
> > +
> > + >>>
> > sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x
> > 81
> >
> 00)/Dot1Q(vlan=0x1,type=0x86DD)/IPv6(dst="CDCD:910A:2222:5498:8475:11
> > 11:3900:2020")/("X"*80)],iface="ens260f0",count=1)
> > +
> > +DUT::
> > +
> > + testpmd> port 0/queue 12: received 1 packets
> > + src=00:00:00:00:00:00 - dst=00:11:22:33:44:55 - type=0x8100 -
> > + length=142 -
> > nb_segs=1 - RSS hash=0xb0c13d2c - RSS queue=0xc - hw ptype: L2_ETHER
> > L3_IPV6_EXT_UNKNOWN L4_NONFRAG - sw ptype: L2_ETHER_VLAN
> > INNER_L2_ETHER_VLAN INNER_L3_IPV6 - l2_len=18 - inner_l2_len=4 -
> > inner_l3_len=40 - Receive queue=0xc
> > + ol_flags: RTE_MBUF_F_RX_RSS_HASH RTE_MBUF_F_RX_L4_CKSUM_GOOD
> > RTE_MBUF_F_RX_IP_CKSUM_GOOD
> > RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD
> > +
> > +Tester::
> > +
> > + >>>
> > sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x
> > 81
> >
> 00)/Dot1Q(vlan=0x2,type=0x86DD)/IPv6(dst="CDCD:910A:2222:5498:8475:11
> > 11:3900:2020")/("X"*80)],iface="ens260f0",count=1)
> > +
> > +DUT::
> > +
> > + testpmd> port 0/queue 12: received 1 packets
> > + src=00:00:00:00:00:00 - dst=00:11:22:33:44:55 - type=0x8100 -
> > + length=142 -
> > nb_segs=1 - RSS hash=0xb0c13d2c - RSS queue=0xc - hw ptype: L2_ETHER
> > L3_IPV6_EXT_UNKNOWN L4_NONFRAG - sw ptype: L2_ETHER_VLAN
> > INNER_L2_ETHER_VLAN INNER_L3_IPV6 - l2_len=18 - inner_l2_len=4 -
> > inner_l3_len=40 - Receive queue=0xc
> > + ol_flags: RTE_MBUF_F_RX_RSS_HASH RTE_MBUF_F_RX_L4_CKSUM_GOOD
> > RTE_MBUF_F_RX_IP_CKSUM_GOOD
> > RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD
> > +
> > +Tester::
> > +
> > + >>>
> > sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x
> > 81
> >
> 00)/Dot1Q(vlan=0x1,type=0x86DD)/IPv6(dst="CDCD:910A:2222:5498:8475:11
> > 11:3900:2023")/("X"*80)],iface="ens260f0",count=1)
> > +
> > +DUT::
> > +
> > + testpmd> port 0/queue 6: received 1 packets
> > + src=00:00:00:00:00:00 - dst=00:11:22:33:44:55 - type=0x8100 -
> > + length=142 -
> > nb_segs=1 - RSS hash=0x63517896 - RSS queue=0x6 - hw ptype: L2_ETHER
> > L3_IPV6_EXT_UNKNOWN L4_NONFRAG - sw ptype: L2_ETHER_VLAN
> > INNER_L2_ETHER_VLAN INNER_L3_IPV6 - l2_len=18 - inner_l2_len=4 -
> > inner_l3_len=40 - Receive queue=0x6
> > + ol_flags: RTE_MBUF_F_RX_RSS_HASH RTE_MBUF_F_RX_L4_CKSUM_GOOD
> > RTE_MBUF_F_RX_IP_CKSUM_GOOD
> > RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD
> > +
> > +6. Destroy a rule and list rules::
> > +
> > + testpmd> flow destroy 0 rule 0
> > +
> > + Get the message::
> > +
> > + Flow rule #0 destroyed
> > +
> > +7. Check the flow list::
> > +
> > + testpmd> flow list 0
> > +
> > + Check the rule not exists in the list.
> > + Send matched packets in step 4, check the action is not right.
> > +
> > +Test Case 3: MAC_QINQ_IPV4_UDP
> > +------------------------------
> > +The test case enable QINQ switch filter for IPv4 + UDP in
> > +non-pipeline mode,
> > and port can support as dst MAC + outer VLAN id + inner VLAN id + IPv4 +
> UDP.
> > +
> > +Test Steps
> > +~~~~~~~~~~
> > +1. Validate a rule::
> > +
> > + testpmd> flow validate 0 ingress pattern eth dst is
> > + 00:11:22:33:44:55 /
> > vlan tci is 2 / vlan tci is 1 / ipv4 / udp src is 50 dst is 23 / end
> > actions queue index 2 / end
> > +
> > + Get the message::
> > +
> > + Flow rule validated
> > +
> > +2. Create a rule and list rules::
> > +
> > + testpmd> flow create 0 ingress pattern eth dst is
> > + 00:11:22:33:44:55 / vlan
> > tci is 2 / vlan tci is 1 / ipv4 / udp src is 50 dst is 23 / end
> > actions queue index 2 / end
> > +
> > + Get the message::
> > +
> > + Flow rule #0 created
> > +
> > +3. Check the flow list::
> > +
> > + testpmd> flow list 0
> > +
> > + ID Group Prio Attr Rule
> > + 0 0 0 i-- ETH VLAN VLAN IPV4 UDP => QUEUE
> > +
> > +4. Send matched packet in scapy on tester, check the DUT received
> > +this packet
> > and the action is right.
> > +
> > +Tester::
> > +
> > + >>>
> > sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x
> > 81
> > 00)/Dot1Q(vlan=0x1,type=0x0800)/IP()/UDP(sport=50,dport=23)/("X"*80)],
> > ifac
> > e="ens260f0",count=1)
> > +
> > +DUT::
> > +
> > + testpmd> port 0/queue 2: received 1 packets
> > + src=00:00:00:00:00:00 - dst=00:11:22:33:44:55 - type=0x8100 -
> > + length=130 -
> > nb_segs=1 - RSS hash=0xddc4fdb3 - RSS queue=0x2 - hw ptype: L2_ETHER
> > L3_IPV4_EXT_UNKNOWN L4_UDP - sw ptype: L2_ETHER_VLAN
> > INNER_L2_ETHER_VLAN INNER_L3_IPV4 INNER_L4_UDP - l2_len=18 -
> > inner_l2_len=4 - inner_l3_len=20 - inner_l4_len=8 - Receive queue=0x2
> > + ol_flags: RTE_MBUF_F_RX_RSS_HASH RTE_MBUF_F_RX_L4_CKSUM_GOOD
> > RTE_MBUF_F_RX_IP_CKSUM_GOOD
> > RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD
> > +
> > +5. Send mismatched packet in scapy on tester, check the DUT received
> > +this
> > packet and the action is not right.
> > +
> > +Tester::
> > +
> > + >>>
> > sendp([Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x
> > 81
> > 00)/Dot1Q(vlan=0x1,type=0x0800)/IP()/UDP(sport=50,dport=23)/("X"*80)],
> > ifac
> > e="ens260f0",count=1)
> > +
> > +DUT::
> > +
> > + testpmd> port 0/queue 3: received 1 packets
> > + src=00:00:00:00:00:00 - dst=00:11:22:33:44:33 - type=0x8100 -
> > + length=130 -
> > nb_segs=1 - RSS hash=0xddc4fdb3 - RSS queue=0x3 - hw ptype: L2_ETHER
> > L3_IPV4_EXT_UNKNOWN L4_UDP - sw ptype: L2_ETHER_VLAN
> > INNER_L2_ETHER_VLAN INNER_L3_IPV4 INNER_L4_UDP - l2_len=18 -
> > inner_l2_len=4 - inner_l3_len=20 - inner_l4_len=8 - Receive queue=0x3
> > + ol_flags: RTE_MBUF_F_RX_RSS_HASH RTE_MBUF_F_RX_L4_CKSUM_GOOD
> > RTE_MBUF_F_RX_IP_CKSUM_GOOD
> > RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD
> > +
> > +Tester::
> > +
> > + >>>
> > sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x
> > 81
> > 00)/Dot1Q(vlan=0x1,type=0x0800)/IP()/UDP(sport=50,dport=23)/("X"*80)],
> > ifac
> > e="ens260f0",count=1)
> > +
> > +DUT::
> > +
> > + testpmd> port 0/queue 3: received 1 packets
> > + src=00:00:00:00:00:00 - dst=00:11:22:33:44:55 - type=0x8100 -
> > + length=130 -
> > nb_segs=1 - RSS hash=0xddc4fdb3 - RSS queue=0x3 - hw ptype: L2_ETHER
> > L3_IPV4_EXT_UNKNOWN L4_UDP - sw ptype: L2_ETHER_VLAN
> > INNER_L2_ETHER_VLAN INNER_L3_IPV4 INNER_L4_UDP - l2_len=18 -
> > inner_l2_len=4 - inner_l3_len=20 - inner_l4_len=8 - Receive queue=0x3
> > + ol_flags: RTE_MBUF_F_RX_RSS_HASH RTE_MBUF_F_RX_L4_CKSUM_GOOD
> > RTE_MBUF_F_RX_IP_CKSUM_GOOD
> > RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD
> > +
> > +Tester::
> > +
> > + >>>
> > sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x
> > 81
> > 00)/Dot1Q(vlan=0x2,type=0x0800)/IP()/UDP(sport=50,dport=23)/("X"*80)],
> > ifac
> > e="ens260f0",count=1)
> > +
> > +DUT::
> > +
> > + testpmd> port 0/queue 3: received 1 packets
> > + src=00:00:00:00:00:00 - dst=00:11:22:33:44:55 - type=0x8100 -
> > + length=130 -
> > nb_segs=1 - RSS hash=0xddc4fdb3 - RSS queue=0x3 - hw ptype: L2_ETHER
> > L3_IPV4_EXT_UNKNOWN L4_UDP - sw ptype: L2_ETHER_VLAN
> > INNER_L2_ETHER_VLAN INNER_L3_IPV4 INNER_L4_UDP - l2_len=18 -
> > inner_l2_len=4 - inner_l3_len=20 - inner_l4_len=8 - Receive queue=0x3
> > + ol_flags: RTE_MBUF_F_RX_RSS_HASH RTE_MBUF_F_RX_L4_CKSUM_GOOD
> > RTE_MBUF_F_RX_IP_CKSUM_GOOD
> > RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD
> > +
> > +Tester::
> > +
> > + >>>
> > sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x
> > 81
> > 00)/Dot1Q(vlan=0x1,type=0x0800)/IP()/UDP(sport=50,dport=22)/("X"*80)],
> > ifac
> > e="ens260f0",count=1)
> > +
> > +DUT::
> > +
> > + testpmd> port 0/queue 3: received 1 packets
> > + src=00:00:00:00:00:00 - dst=00:11:22:33:44:55 - type=0x8100 -
> > + length=130 -
> > nb_segs=1 - RSS hash=0xddc4fdb3 - RSS queue=0x3 - hw ptype: L2_ETHER
> > L3_IPV4_EXT_UNKNOWN L4_UDP - sw ptype: L2_ETHER_VLAN
> > INNER_L2_ETHER_VLAN INNER_L3_IPV4 INNER_L4_UDP - l2_len=18 -
> > inner_l2_len=4 - inner_l3_len=20 - inner_l4_len=8 - Receive queue=0x3
> > + ol_flags: RTE_MBUF_F_RX_RSS_HASH RTE_MBUF_F_RX_L4_CKSUM_GOOD
> > RTE_MBUF_F_RX_IP_CKSUM_GOOD
> > RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD
> > +
> > +6. Destroy a rule and list rules::
> > +
> > + testpmd> flow destroy 0 rule 0
> > +
> > + Get the message::
> > +
> > + Flow rule #0 destroyed
> > +
> > +7. Check the flow list::
> > +
> > + testpmd> flow list 0
> > +
> > + Check the rule not exists in the list.
> > + Send matched packets in step 4, check the action is not right.
> > +
> > +Test Case 4: MAC_QINQ_IPV4_TCP
> > +------------------------------
> > +The test case enable QINQ switch filter for IPv4 + TCP in
> > +non-pipeline mode,
> > and port can support as dst MAC + outer VLAN id + inner VLAN id + IPv4 + TCP.
> > +
> > +Test Steps
> > +~~~~~~~~~~
> > +1. Validate a rule::
> > +
> > + testpmd> flow validate 0 ingress pattern eth dst is
> > + 00:11:22:33:44:55 /
> > vlan tci is 2 / vlan tci is 1 / ipv4 / tcp src is 50 dst is 23 / end
> > actions rss queues
> > 4 5 end / end
> > +
> > + Get the message::
> > +
> > + Flow rule validated
> > +
> > +2. Create a rule and list rules::
> > +
> > + testpmd> flow create 0 ingress pattern eth dst is
> > + 00:11:22:33:44:55 / vlan
> > tci is 2 / vlan tci is 1 / ipv4 / tcp src is 50 dst is 23 / end
> > actions rss queues 4 5 end / end
> > +
> > + Get the message::
> > +
> > + Flow rule #0 created
> > +
> > +3. Check the flow list::
> > +
> > + testpmd> flow list 0
> > +
> > + ID Group Prio Attr Rule
> > + 0 0 0 i-- ETH VLAN VLAN IPV4 TCP => RSS
> > +
> > +4. Send matched packet in scapy on tester, check the DUT received
> > +this packet
> > and the action is right.
> > +
> > +Tester::
> > +
> > + >>>
> > sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x
> > 81
> > 00)/Dot1Q(vlan=0x1,type=0x0800)/IP()/TCP(sport=50,dport=23)/("X"*80)],
> > ifac
> > e="ens260f0",count=1)
> > +
> > +DUT::
> > +
> > + testpmd> port 0/queue 5: received 1 packets
> > + src=00:00:00:00:00:00 - dst=00:11:22:33:44:55 - type=0x8100 -
> > + length=142 -
> > nb_segs=1 - RSS hash=0xddc4fdb3 - RSS queue=0x5 - hw ptype: L2_ETHER
> > L3_IPV4_EXT_UNKNOWN L4_TCP - sw ptype: L2_ETHER_VLAN
> > INNER_L2_ETHER_VLAN INNER_L3_IPV4 INNER_L4_TCP - l2_len=18 -
> > inner_l2_len=4 - inner_l3_len=20 - inner_l4_len=20 - Receive queue=0x5
> > + ol_flags: RTE_MBUF_F_RX_RSS_HASH RTE_MBUF_F_RX_L4_CKSUM_GOOD
> > RTE_MBUF_F_RX_IP_CKSUM_GOOD
> > RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD
> > +
> > +5. Send mismatched packet in scapy on tester, check the DUT received
> > +this
> > packet and the action is not right.
> > +
> > +Tester::
> > +
> > + >>>
> > sendp([Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x
> > 81
> > 00)/Dot1Q(vlan=0x1,type=0x0800)/IP()/TCP(sport=50,dport=23)/("X"*80)],
> > ifac
> > e="ens260f0",count=1)
> > +
> > +DUT::
> > +
> > + testpmd> port 0/queue 3: received 1 packets
> > + src=00:00:00:00:00:00 - dst=00:11:22:33:44:33 - type=0x8100 -
> > + length=142 -
> > nb_segs=1 - RSS hash=0xddc4fdb3 - RSS queue=0x3 - hw ptype: L2_ETHER
> > L3_IPV4_EXT_UNKNOWN L4_TCP - sw ptype: L2_ETHER_VLAN
> > INNER_L2_ETHER_VLAN INNER_L3_IPV4 INNER_L4_TCP - l2_len=18 -
> > inner_l2_len=4 - inner_l3_len=20 - inner_l4_len=20 - Receive queue=0x3
> > + ol_flags: RTE_MBUF_F_RX_RSS_HASH RTE_MBUF_F_RX_L4_CKSUM_GOOD
> > RTE_MBUF_F_RX_IP_CKSUM_GOOD
> > RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD
> > +
> > +Tester::
> > +
> > + >>>
> > sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x
> > 81
> > 00)/Dot1Q(vlan=0x1,type=0x0800)/IP()/TCP(sport=50,dport=23)/("X"*80)],
> > ifac
> > e="ens260f0",count=1)
> > +
> > +DUT::
> > +
> > + testpmd> port 0/queue 3: received 1 packets
> > + src=00:00:00:00:00:00 - dst=00:11:22:33:44:55 - type=0x8100 -
> > + length=142 -
> > nb_segs=1 - RSS hash=0xddc4fdb3 - RSS queue=0x3 - hw ptype: L2_ETHER
> > L3_IPV4_EXT_UNKNOWN L4_TCP - sw ptype: L2_ETHER_VLAN
> > INNER_L2_ETHER_VLAN INNER_L3_IPV4 INNER_L4_TCP - l2_len=18 -
> > inner_l2_len=4 - inner_l3_len=20 - inner_l4_len=20 - Receive queue=0x3
> > + ol_flags: RTE_MBUF_F_RX_RSS_HASH RTE_MBUF_F_RX_L4_CKSUM_GOOD
> > RTE_MBUF_F_RX_IP_CKSUM_GOOD
> > RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD
> > +
> > +Tester::
> > +
> > + >>>
> > sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x
> > 81
> > 00)/Dot1Q(vlan=0x2,type=0x0800)/IP()/TCP(sport=50,dport=23)/("X"*80)],
> > ifac
> > e="ens260f0",count=1)
> > +
> > +DUT::
> > +
> > + testpmd> port 0/queue 3: received 1 packets
> > + src=00:00:00:00:00:00 - dst=00:11:22:33:44:55 - type=0x8100 -
> > + length=142 -
> > nb_segs=1 - RSS hash=0xddc4fdb3 - RSS queue=0x3 - hw ptype: L2_ETHER
> > L3_IPV4_EXT_UNKNOWN L4_TCP - sw ptype: L2_ETHER_VLAN
> > INNER_L2_ETHER_VLAN INNER_L3_IPV4 INNER_L4_TCP - l2_len=18 -
> > inner_l2_len=4 - inner_l3_len=20 - inner_l4_len=20 - Receive queue=0x3
> > + ol_flags: RTE_MBUF_F_RX_RSS_HASH RTE_MBUF_F_RX_L4_CKSUM_GOOD
> > RTE_MBUF_F_RX_IP_CKSUM_GOOD
> > RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD
> > +
> > +Tester::
> > +
> > + >>>
> > sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x
> > 81
> > 00)/Dot1Q(vlan=0x1,type=0x0800)/IP()/TCP(sport=50,dport=22)/("X"*80)],
> > ifac
> > e="ens260f0",count=1)
> > +
> > +DUT::
> > +
> > + testpmd> port 0/queue 3: received 1 packets
> > + src=00:00:00:00:00:00 - dst=00:11:22:33:44:55 - type=0x8100 -
> > + length=142 -
> > nb_segs=1 - RSS hash=0xddc4fdb3 - RSS queue=0x3 - hw ptype: L2_ETHER
> > L3_IPV4_EXT_UNKNOWN L4_TCP - sw ptype: L2_ETHER_VLAN
> > INNER_L2_ETHER_VLAN INNER_L3_IPV4 INNER_L4_TCP - l2_len=18 -
> > inner_l2_len=4 - inner_l3_len=20 - inner_l4_len=20 - Receive queue=0x3
> > + ol_flags: RTE_MBUF_F_RX_RSS_HASH RTE_MBUF_F_RX_L4_CKSUM_GOOD
> > RTE_MBUF_F_RX_IP_CKSUM_GOOD
> > RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD
> > +
> > +6. Destroy a rule and list rules::
> > +
> > + testpmd> flow destroy 0 rule 0
> > +
> > + Get the message::
> > +
> > + Flow rule #0 destroyed
> > +
> > +7. Check the flow list::
> > +
> > + testpmd> flow list 0
> > +
> > + Check the rule not exists in the list.
> > + Send matched packets in step 4, check the action is not right.
> > +
> > +#Pipeline mode
> > +
> > +Test Case 5: MAC_QINQ_IPV6_UDP
> > +------------------------------
> > +The test case enable QINQ switch filter for IPv6 + UDP in pipeline
> > +mode, and
> > port can support as dst MAC + outer VLAN id + inner VLAN id + IPv6 + UDP.
> > +
> > +Test Steps
> > +~~~~~~~~~~
> > +1. Validate a rule::
> > +
> > + testpmd> flow validate 0 priority 0 ingress pattern eth dst is
> > 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / ipv6 dst is
> > CDCD:910A:2222:5498:8475:1111:3900:2020 / udp src is 50 dst is 23 /
> > end actions drop / end
> > +
> > + Get the message::
> > +
> > + Flow rule validated
> > +
> > +2. Create a rule and list rules::
> > +
> > + testpmd> flow create 0 priority 0 ingress pattern eth dst is
> > 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / ipv6 dst is
> > CDCD:910A:2222:5498:8475:1111:3900:2020 / udp src is 50 dst is 23 /
> > end actions drop / end
> > +
> > + Get the message::
> > +
> > + Flow rule #0 created
> > +
> > +3. Check the flow list::
> > +
> > + testpmd> flow list 0
> > +
> > + ID Group Prio Attr Rule
> > + 0 0 0 i-- ETH VLAN VLAN IPV6 UDP => DROP
> > +
> > +4. Send matched packet in scapy on tester, check the DUT received
> > +this packet
> > and the action is right.
> > +
> > +Tester::
> > +
> > + >>>
> > sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x
> > 81
> >
> 00)/Dot1Q(vlan=0x1,type=0x86DD)/IPv6(dst="CDCD:910A:2222:5498:8475:11
> > 11:3900:2020")/UDP(sport=50,dport=23)/("X"*80)],iface="ens260f0",count
> > =1)
> > +
> > +DUT::
> > +
> > + testpmd>
> > +
> > +5. Send mismatched packet in scapy on tester, check the DUT received
> > +this
> > packet and the action is not right.
> > +
> > +Tester::
> > +
> > + >>>
> > sendp([Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x
> > 81
> >
> 00)/Dot1Q(vlan=0x1,type=0x86DD)/IPv6(dst="CDCD:910A:2222:5498:8475:11
> > 11:3900:2020")/UDP(sport=50,dport=23)/("X"*80)],iface="ens260f0",count
> > =1)
> > +
> > +DUT::
> > +
> > + testpmd> port 0/queue 15: received 1 packets
> > + src=00:00:00:00:00:00 - dst=00:11:22:33:44:33 - type=0x8100 -
> > + length=150 -
> > nb_segs=1 - RSS hash=0xc5dfbe3f - RSS queue=0xf - hw ptype: L2_ETHER
> > L3_IPV6_EXT_UNKNOWN L4_UDP - sw ptype: L2_ETHER_VLAN
> > INNER_L2_ETHER_VLAN INNER_L3_IPV6 INNER_L4_UDP - l2_len=18 -
> > inner_l2_len=4 - inner_l3_len=40 - inner_l4_len=8 - Receive queue=0xf
> > + ol_flags: RTE_MBUF_F_RX_RSS_HASH RTE_MBUF_F_RX_L4_CKSUM_GOOD
> > RTE_MBUF_F_RX_IP_CKSUM_GOOD
> > RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD
> > +
> > +Tester::
> > +
> > + >>>
> > sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x
> > 81
> >
> 00)/Dot1Q(vlan=0x1,type=0x86DD)/IPv6(dst="CDCD:910A:2222:5498:8475:11
> > 11:3900:2020")/UDP(sport=50,dport=23)/("X"*80)],iface="ens260f0",count
> > =1)
> > +
> > +DUT::
> > +
> > + testpmd> port 0/queue 15: received 1 packets
> > + src=00:00:00:00:00:00 - dst=00:11:22:33:44:55 - type=0x8100 -
> > + length=150 -
> > nb_segs=1 - RSS hash=0xc5dfbe3f - RSS queue=0xf - hw ptype: L2_ETHER
> > L3_IPV6_EXT_UNKNOWN L4_UDP - sw ptype: L2_ETHER_VLAN
> > INNER_L2_ETHER_VLAN INNER_L3_IPV6 INNER_L4_UDP - l2_len=18 -
> > inner_l2_len=4 - inner_l3_len=40 - inner_l4_len=8 - Receive queue=0xf
> > + ol_flags: RTE_MBUF_F_RX_RSS_HASH RTE_MBUF_F_RX_L4_CKSUM_GOOD
> > RTE_MBUF_F_RX_IP_CKSUM_GOOD
> > RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD
> > +
> > +Tester::
> > +
> > + >>>
> > sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x
> > 81
> >
> 00)/Dot1Q(vlan=0x2,type=0x86DD)/IPv6(dst="CDCD:910A:2222:5498:8475:11
> > 11:3900:2020")/UDP(sport=50,dport=23)/("X"*80)],iface="ens260f0",count
> > =1)
> > +
> > +DUT::
> > +
> > + testpmd> port 0/queue 15: received 1 packets
> > + src=00:00:00:00:00:00 - dst=00:11:22:33:44:55 - type=0x8100 -
> > + length=150 -
> > nb_segs=1 - RSS hash=0xc5dfbe3f - RSS queue=0xf - hw ptype: L2_ETHER
> > L3_IPV6_EXT_UNKNOWN L4_UDP - sw ptype: L2_ETHER_VLAN
> > INNER_L2_ETHER_VLAN INNER_L3_IPV6 INNER_L4_UDP - l2_len=18 -
> > inner_l2_len=4 - inner_l3_len=40 - inner_l4_len=8 - Receive queue=0xf
> > + ol_flags: RTE_MBUF_F_RX_RSS_HASH RTE_MBUF_F_RX_L4_CKSUM_GOOD
> > RTE_MBUF_F_RX_IP_CKSUM_GOOD
> > RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD
> > +
> > +Tester::
> > +
> > + >>>
> > sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x
> > 81
> >
> 00)/Dot1Q(vlan=0x1,type=0x86DD)/IPv6(dst="CDCD:910A:2222:5498:8475:11
> > 11:3900:2020")/UDP(sport=50,dport=22)/("X"*80)],iface="ens260f0",count
> > =1)
> > +
> > +DUT::
> > +
> > + testpmd> port 0/queue 15: received 1 packets
> > + src=00:00:00:00:00:00 - dst=00:11:22:33:44:55 - type=0x8100 -
> > + length=150 -
> > nb_segs=1 - RSS hash=0xc5dfbe3f - RSS queue=0xf - hw ptype: L2_ETHER
> > L3_IPV6_EXT_UNKNOWN L4_UDP - sw ptype: L2_ETHER_VLAN
> > INNER_L2_ETHER_VLAN INNER_L3_IPV6 INNER_L4_UDP - l2_len=18 -
> > inner_l2_len=4 - inner_l3_len=40 - inner_l4_len=8 - Receive queue=0xf
> > + ol_flags: RTE_MBUF_F_RX_RSS_HASH RTE_MBUF_F_RX_L4_CKSUM_GOOD
> > RTE_MBUF_F_RX_IP_CKSUM_GOOD
> > RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD
> > +
> > +6. Destroy a rule and list rules::
> > +
> > + testpmd> flow destroy 0 rule 0
> > +
> > + Get the message::
> > +
> > + Flow rule #0 destroyed
> > +
> > +7. Check the flow list::
> > +
> > + testpmd> flow list 0
> > +
> > + Check the rule not exists in the list.
> > + Send matched packets in step 4, check the action is not right.
> > +
> > +Test Case 6: MAC_QINQ_IPV6_TCP
> > +------------------------------
> > +The test case enable QINQ switch filter for IPv6 + TCP in pipeline
> > +mode, and
> > port can support as dst MAC + outer VLAN id + inner VLAN id + IPv6 + TCP.
> > +
> > +Test Steps
> > +~~~~~~~~~~
> > +1. Validate a rule::
> > +
> > + testpmd> flow validate 0 priority 0 ingress pattern eth dst is
> > 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / ipv6 dst is
> > CDCD:910A:2222:5498:8475:1111:3900:2020 / tcp src is 50 dst is 23 /
> > end actions queue index 7 / end
> > +
> > + Get the message::
> > +
> > + Flow rule validated
> > +
> > +2. Create a rule and list rules::
> > +
> > + testpmd> flow create 0 priority 0 ingress pattern eth dst is
> > 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / ipv6 dst is
> > CDCD:910A:2222:5498:8475:1111:3900:2020 / tcp src is 50 dst is 23 /
> > end actions queue index 7 / end
> > +
> > + Get the message::
> > +
> > + Flow rule #0 created
> > +
> > +3. Check the flow list::
> > +
> > + testpmd> flow list 0
> > +
> > + ID Group Prio Attr Rule
> > + 0 0 0 i-- ETH VLAN VLAN IPV6 TCP => QUEUE
> > +
> > +4. Send matched packet in scapy on tester, check the DUT received
> > +this packet
> > and the action is right.
> > +
> > +Tester::
> > +
> > + >>>
> > sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x
> > 81
> >
> 00)/Dot1Q(vlan=0x1,type=0x86DD)/IPv6(dst="CDCD:910A:2222:5498:8475:11
> > 11:3900:2020")/TCP(sport=50,dport=23)/("X"*80)],iface="ens260f0",count
> > =1)
> > +
> > +DUT::
> > +
> > + testpmd> port 0/queue 7: received 1 packets
> > + src=00:00:00:00:00:00 - dst=00:11:22:33:44:55 - type=0x8100 -
> > + length=162 -
> > nb_segs=1 - RSS hash=0xc5dfbe3f - RSS queue=0x7 - hw ptype: L2_ETHER
> > L3_IPV6_EXT_UNKNOWN L4_TCP - sw ptype: L2_ETHER_VLAN
> > INNER_L2_ETHER_VLAN INNER_L3_IPV6 INNER_L4_TCP - l2_len=18 -
> > inner_l2_len=4 - inner_l3_len=40 - inner_l4_len=20 - Receive queue=0x7
> > + ol_flags: RTE_MBUF_F_RX_RSS_HASH RTE_MBUF_F_RX_L4_CKSUM_GOOD
> > RTE_MBUF_F_RX_IP_CKSUM_GOOD
> > RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD
> > +
> > +5. Send mismatched packet in scapy on tester, check the DUT received
> > +this
> > packet and the action is not right.
> > +
> > +Tester::
> > +
> > + >>>
> > sendp([Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x
> > 81
> >
> 00)/Dot1Q(vlan=0x1,type=0x86DD)/IPv6(dst="CDCD:910A:2222:5498:8475:11
> > 11:3900:2020")/TCP(sport=50,dport=23)/("X"*80)],iface="ens260f0",count
> > =1)
> > +
> > +DUT::
> > +
> > + testpmd> port 0/queue 15: received 1 packets
> > + src=00:00:00:00:00:00 - dst=00:11:22:33:44:33 - type=0x8100 -
> > + length=162 -
> > nb_segs=1 - RSS hash=0xc5dfbe3f - RSS queue=0xf - hw ptype: L2_ETHER
> > L3_IPV6_EXT_UNKNOWN L4_TCP - sw ptype: L2_ETHER_VLAN
> > INNER_L2_ETHER_VLAN INNER_L3_IPV6 INNER_L4_TCP - l2_len=18 -
> > inner_l2_len=4 - inner_l3_len=40 - inner_l4_len=20 - Receive queue=0xf
> > + ol_flags: RTE_MBUF_F_RX_RSS_HASH RTE_MBUF_F_RX_L4_CKSUM_GOOD
> > RTE_MBUF_F_RX_IP_CKSUM_GOOD
> > RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD
> > +
> > +Tester::
> > +
> > + >>>
> > sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x
> > 81
> >
> 00)/Dot1Q(vlan=0x1,type=0x86DD)/IPv6(dst="CDCD:910A:2222:5498:8475:11
> > 11:3900:2020")/TCP(sport=50,dport=23)/("X"*80)],iface="ens260f0",count
> > =1)
> > +
> > +DUT::
> > +
> > + testpmd> port 0/queue 15: received 1 packets
> > + src=00:00:00:00:00:00 - dst=00:11:22:33:44:55 - type=0x8100 -
> > + length=162 -
> > nb_segs=1 - RSS hash=0xc5dfbe3f - RSS queue=0xf - hw ptype: L2_ETHER
> > L3_IPV6_EXT_UNKNOWN L4_TCP - sw ptype: L2_ETHER_VLAN
> > INNER_L2_ETHER_VLAN INNER_L3_IPV6 INNER_L4_TCP - l2_len=18 -
> > inner_l2_len=4 - inner_l3_len=40 - inner_l4_len=20 - Receive queue=0xf
> > + ol_flags: RTE_MBUF_F_RX_RSS_HASH RTE_MBUF_F_RX_L4_CKSUM_GOOD
> > RTE_MBUF_F_RX_IP_CKSUM_GOOD
> > RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD
> > +
> > +Tester::
> > +
> > + >>>
> > sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x
> > 81
> >
> 00)/Dot1Q(vlan=0x2,type=0x86DD)/IPv6(dst="CDCD:910A:2222:5498:8475:11
> > 11:3900:2020")/TCP(sport=50,dport=23)/("X"*80)],iface="ens260f0",count
> > =1)
> > +
> > +DUT::
> > +
> > + testpmd> port 0/queue 15: received 1 packets
> > + src=00:00:00:00:00:00 - dst=00:11:22:33:44:55 - type=0x8100 -
> > + length=162 -
> > nb_segs=1 - RSS hash=0xc5dfbe3f - RSS queue=0xf - hw ptype: L2_ETHER
> > L3_IPV6_EXT_UNKNOWN L4_TCP - sw ptype: L2_ETHER_VLAN
> > INNER_L2_ETHER_VLAN INNER_L3_IPV6 INNER_L4_TCP - l2_len=18 -
> > inner_l2_len=4 - inner_l3_len=40 - inner_l4_len=20 - Receive queue=0xf
> > + ol_flags: RTE_MBUF_F_RX_RSS_HASH RTE_MBUF_F_RX_L4_CKSUM_GOOD
> > RTE_MBUF_F_RX_IP_CKSUM_GOOD
> > RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD
> > +
> > +Tester::
> > +
> > + >>>
> > sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x
> > 81
> >
> 00)/Dot1Q(vlan=0x1,type=0x86DD)/IPv6(dst="CDCD:910A:2222:5498:8475:11
> > 11:3900:2020")/TCP(sport=50,dport=22)/("X"*80)],iface="ens260f0",count
> > =1)
> > +
> > +DUT::
> > +
> > + testpmd> port 0/queue 15: received 1 packets
> > + src=00:00:00:00:00:00 - dst=00:11:22:33:44:55 - type=0x8100 -
> > + length=162 -
> > nb_segs=1 - RSS hash=0xc5dfbe3f - RSS queue=0xf - hw ptype: L2_ETHER
> > L3_IPV6_EXT_UNKNOWN L4_TCP - sw ptype: L2_ETHER_VLAN
> > INNER_L2_ETHER_VLAN INNER_L3_IPV6 INNER_L4_TCP - l2_len=18 -
> > inner_l2_len=4 - inner_l3_len=40 - inner_l4_len=20 - Receive queue=0xf
> > + ol_flags: RTE_MBUF_F_RX_RSS_HASH RTE_MBUF_F_RX_L4_CKSUM_GOOD
> > RTE_MBUF_F_RX_IP_CKSUM_GOOD
> > RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD
> > +
> > +6. Destroy a rule and list rules::
> > +
> > + testpmd> flow destroy 0 rule 0
> > +
> > + Get the message::
> > +
> > + Flow rule #0 destroyed
> > +
> > +7. Check the flow list::
> > +
> > + testpmd> flow list 0
> > +
> > + Check the rule not exists in the list.
> > + Send matched packets in step 4, check the action is not right.
> > +
> > +
> > --
> > 2.25.1
prev parent reply other threads:[~2022-01-19 3:07 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-01-18 10:44 Yaqi Tang
2022-01-18 5:30 ` Lin, Xueqin
2022-01-19 3:06 ` Lin, Xueqin [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=SJ0PR11MB559918CF5CD3434F87AE6FAE94599@SJ0PR11MB5599.namprd11.prod.outlook.com \
--to=xueqin.lin@intel.com \
--cc=dts@dpdk.org \
--cc=yaqi.tang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).