From: "Xueming(Steven) Li" <xuemingl@mellanox.com>
To: "Nélio Laranjeiro" <nelio.laranjeiro@6wind.com>
Cc: Shahaf Shuler <shahafs@mellanox.com>, "dev@dpdk.org" <dev@dpdk.org>
Subject: Re: [dpdk-dev] [PATCH v3 01/14] net/mlx5: support 16 hardware priorities
Date: Fri, 13 Apr 2018 13:10:07 +0000 [thread overview]
Message-ID: <VI1PR05MB16784A266D5B7D4085F73B5FACB30@VI1PR05MB1678.eurprd05.prod.outlook.com> (raw)
In-Reply-To: <20180413115835.cnifpytlocoj4jsg@laranjeiro-vm.dev.6wind.com>
> -----Original Message-----
> From: Nélio Laranjeiro <nelio.laranjeiro@6wind.com>
> Sent: Friday, April 13, 2018 7:59 PM
> To: Xueming(Steven) Li <xuemingl@mellanox.com>
> Cc: Shahaf Shuler <shahafs@mellanox.com>; dev@dpdk.org
> Subject: Re: [PATCH v3 01/14] net/mlx5: support 16 hardware priorities
>
> Hi Xueming,
>
> Small nips and documentation issues,
>
> On Fri, Apr 13, 2018 at 07:20:10PM +0800, Xueming Li wrote:
> > This patch supports new 16 Verbs flow priorities by trying to create a
> > simple flow of priority 15. If 16 priorities not available, fallback
> > to traditional 8 priorities.
> >
> > Verb priority mapping:
> > 8 priorities >=16 priorities
> > Control flow: 4-7 8-15
> > User normal flow: 1-3 4-7
> > User tunnel flow: 0-2 0-3
>
> There is an overlap between tunnel and normal flows it is expected?
For 8 priorities, (4-7), (1-3) and (0-2) are the behavior of today,
1 Verbs shift to make tunnel flow higher priority, please refer to
commit #74936571
>
> >
> > Signed-off-by: Xueming Li <xuemingl@mellanox.com>
> > ---
> > drivers/net/mlx5/mlx5.c | 18 +++++++
> > drivers/net/mlx5/mlx5.h | 5 ++
> > drivers/net/mlx5/mlx5_flow.c | 112
> +++++++++++++++++++++++++++++++++-------
> > drivers/net/mlx5/mlx5_trigger.c | 8 ---
> > 4 files changed, 115 insertions(+), 28 deletions(-)
> >
> > diff --git a/drivers/net/mlx5/mlx5.c b/drivers/net/mlx5/mlx5.c index
> > cfab55897..38118e524 100644
> > --- a/drivers/net/mlx5/mlx5.c
> > +++ b/drivers/net/mlx5/mlx5.c
> > @@ -197,6 +197,7 @@ mlx5_dev_close(struct rte_eth_dev *dev)
> > priv->txqs_n = 0;
> > priv->txqs = NULL;
> > }
> > + mlx5_flow_delete_drop_queue(dev);
> > if (priv->pd != NULL) {
> > assert(priv->ctx != NULL);
> > claim_zero(mlx5_glue->dealloc_pd(priv->pd));
> > @@ -612,6 +613,7 @@ mlx5_pci_probe(struct rte_pci_driver *pci_drv
> __rte_unused,
> > unsigned int mps;
> > unsigned int cqe_comp;
> > unsigned int tunnel_en = 0;
> > + unsigned int verb_priorities = 0;
> > int idx;
> > int i;
> > struct mlx5dv_context attrs_out = {0}; @@ -993,6 +995,22 @@
> > mlx5_pci_probe(struct rte_pci_driver *pci_drv __rte_unused,
> > mlx5_set_link_up(eth_dev);
> > /* Store device configuration on private structure. */
> > priv->config = config;
> > + /* Create drop queue. */
> > + err = mlx5_flow_create_drop_queue(eth_dev);
> > + if (err) {
> > + DRV_LOG(ERR, "port %u drop queue allocation failed: %s",
> > + eth_dev->data->port_id, strerror(rte_errno));
> > + goto port_error;
> > + }
> > + /* Supported Verbs flow priority number detection. */
> > + if (verb_priorities == 0)
> > + verb_priorities = priv_get_max_verbs_prio(eth_dev);
>
> No more priv*() rename it to mlx5_get_max_verbs_prio()
>
> > + if (verb_priorities < MLX5_VERBS_FLOW_PRIO_8) {
> > + DRV_LOG(ERR, "port %u wrong Verbs flow priorities: %u",
> > + eth_dev->data->port_id, verb_priorities);
> > + goto port_error;
> > + }
> > + priv->config.max_verb_prio = verb_priorities;
>
> s/verb/verbs/
>
> > continue;
> > port_error:
> > if (priv)
> > diff --git a/drivers/net/mlx5/mlx5.h b/drivers/net/mlx5/mlx5.h index
> > 63b24e6bb..6e4613fe0 100644
> > --- a/drivers/net/mlx5/mlx5.h
> > +++ b/drivers/net/mlx5/mlx5.h
> > @@ -89,6 +89,7 @@ struct mlx5_dev_config {
> > unsigned int rx_vec_en:1; /* Rx vector is enabled. */
> > unsigned int mpw_hdr_dseg:1; /* Enable DSEGs in the title WQEBB. */
> > unsigned int vf_nl_en:1; /* Enable Netlink requests in VF mode. */
> > + unsigned int max_verb_prio; /* Number of Verb flow priorities. */
> > unsigned int tso_max_payload_sz; /* Maximum TCP payload for TSO. */
> > unsigned int ind_table_max_size; /* Maximum indirection table size.
> */
> > int txq_inline; /* Maximum packet size for inlining. */ @@ -105,6
> > +106,9 @@ enum mlx5_verbs_alloc_type {
> > MLX5_VERBS_ALLOC_TYPE_RX_QUEUE,
> > };
> >
> > +/* 8 Verbs priorities. */
> > +#define MLX5_VERBS_FLOW_PRIO_8 8
> > +
> > /**
> > * Verbs allocator needs a context to know in the callback which kind
> of
> > * resources it is allocating.
> > @@ -253,6 +257,7 @@ int mlx5_traffic_restart(struct rte_eth_dev *dev);
> >
> > /* mlx5_flow.c */
> >
> > +unsigned int priv_get_max_verbs_prio(struct rte_eth_dev *dev);
> > int mlx5_flow_validate(struct rte_eth_dev *dev,
> > const struct rte_flow_attr *attr,
> > const struct rte_flow_item items[], diff --git
> > a/drivers/net/mlx5/mlx5_flow.c b/drivers/net/mlx5/mlx5_flow.c index
> > 288610620..5c4f0b586 100644
> > --- a/drivers/net/mlx5/mlx5_flow.c
> > +++ b/drivers/net/mlx5/mlx5_flow.c
> > @@ -32,8 +32,8 @@
> > #include "mlx5_prm.h"
> > #include "mlx5_glue.h"
> >
> > -/* Define minimal priority for control plane flows. */ -#define
> > MLX5_CTRL_FLOW_PRIORITY 4
> > +/* Flow priority for control plane flows. */ #define
> > +MLX5_CTRL_FLOW_PRIORITY 1
> >
> > /* Internet Protocol versions. */
> > #define MLX5_IPV4 4
> > @@ -129,7 +129,7 @@ const struct hash_rxq_init hash_rxq_init[] = {
> > IBV_RX_HASH_SRC_PORT_TCP |
> > IBV_RX_HASH_DST_PORT_TCP),
> > .dpdk_rss_hf = ETH_RSS_NONFRAG_IPV4_TCP,
> > - .flow_priority = 1,
> > + .flow_priority = 0,
> > .ip_version = MLX5_IPV4,
> > },
> > [HASH_RXQ_UDPV4] = {
> > @@ -138,7 +138,7 @@ const struct hash_rxq_init hash_rxq_init[] = {
> > IBV_RX_HASH_SRC_PORT_UDP |
> > IBV_RX_HASH_DST_PORT_UDP),
> > .dpdk_rss_hf = ETH_RSS_NONFRAG_IPV4_UDP,
> > - .flow_priority = 1,
> > + .flow_priority = 0,
> > .ip_version = MLX5_IPV4,
> > },
> > [HASH_RXQ_IPV4] = {
> > @@ -146,7 +146,7 @@ const struct hash_rxq_init hash_rxq_init[] = {
> > IBV_RX_HASH_DST_IPV4),
> > .dpdk_rss_hf = (ETH_RSS_IPV4 |
> > ETH_RSS_FRAG_IPV4),
> > - .flow_priority = 2,
> > + .flow_priority = 1,
> > .ip_version = MLX5_IPV4,
> > },
> > [HASH_RXQ_TCPV6] = {
> > @@ -155,7 +155,7 @@ const struct hash_rxq_init hash_rxq_init[] = {
> > IBV_RX_HASH_SRC_PORT_TCP |
> > IBV_RX_HASH_DST_PORT_TCP),
> > .dpdk_rss_hf = ETH_RSS_NONFRAG_IPV6_TCP,
> > - .flow_priority = 1,
> > + .flow_priority = 0,
> > .ip_version = MLX5_IPV6,
> > },
> > [HASH_RXQ_UDPV6] = {
> > @@ -164,7 +164,7 @@ const struct hash_rxq_init hash_rxq_init[] = {
> > IBV_RX_HASH_SRC_PORT_UDP |
> > IBV_RX_HASH_DST_PORT_UDP),
> > .dpdk_rss_hf = ETH_RSS_NONFRAG_IPV6_UDP,
> > - .flow_priority = 1,
> > + .flow_priority = 0,
> > .ip_version = MLX5_IPV6,
> > },
> > [HASH_RXQ_IPV6] = {
> > @@ -172,13 +172,13 @@ const struct hash_rxq_init hash_rxq_init[] = {
> > IBV_RX_HASH_DST_IPV6),
> > .dpdk_rss_hf = (ETH_RSS_IPV6 |
> > ETH_RSS_FRAG_IPV6),
> > - .flow_priority = 2,
> > + .flow_priority = 1,
> > .ip_version = MLX5_IPV6,
> > },
> > [HASH_RXQ_ETH] = {
> > .hash_fields = 0,
> > .dpdk_rss_hf = 0,
> > - .flow_priority = 3,
> > + .flow_priority = 2,
> > },
> > };
> >
> > @@ -900,30 +900,50 @@ mlx5_flow_convert_allocate(unsigned int size,
> struct rte_flow_error *error)
> > * Make inner packet matching with an higher priority from the non
> Inner
> > * matching.
> > *
> > + * @param dev
> > + * Pointer to Ethernet device.
> > * @param[in, out] parser
> > * Internal parser structure.
> > * @param attr
> > * User flow attribute.
> > */
> > static void
> > -mlx5_flow_update_priority(struct mlx5_flow_parse *parser,
> > +mlx5_flow_update_priority(struct rte_eth_dev *dev,
> > + struct mlx5_flow_parse *parser,
> > const struct rte_flow_attr *attr) {
> > + struct priv *priv = dev->data->dev_private;
> > unsigned int i;
> > + uint16_t priority;
> >
> > + /* 8 priorities >= 16 priorities
> > + * Control flow: 4-7 8-15
> > + * User normal flow: 1-3 4-7
> > + * User tunnel flow: 0-2 0-3
> > + */
>
> Same comment here, the tunnel flow overlap when there are only 8
> priorities.
>
> > + priority = attr->priority * MLX5_VERBS_FLOW_PRIO_8;
> > + if (priv->config.max_verb_prio == MLX5_VERBS_FLOW_PRIO_8)
> > + priority /= 2;
> > + /*
> > + * Lower non-tunnel flow Verbs priority 1 if only support 8 Verbs
> > + * priorities, lower 4 otherwise.
> > + */
> > + if (!parser->inner) {
> > + if (priv->config.max_verb_prio == MLX5_VERBS_FLOW_PRIO_8)
> > + priority += 1;
> > + else
> > + priority += MLX5_VERBS_FLOW_PRIO_8 / 2;
> > + }
> > if (parser->drop) {
> > - parser->queue[HASH_RXQ_ETH].ibv_attr->priority =
> > - attr->priority +
> > - hash_rxq_init[HASH_RXQ_ETH].flow_priority;
> > + parser->queue[HASH_RXQ_ETH].ibv_attr->priority = priority +
> > + hash_rxq_init[HASH_RXQ_ETH].flow_priority;
> > return;
> > }
> > for (i = 0; i != hash_rxq_init_n; ++i) {
> > - if (parser->queue[i].ibv_attr) {
> > - parser->queue[i].ibv_attr->priority =
> > - attr->priority +
> > - hash_rxq_init[i].flow_priority -
> > - (parser->inner ? 1 : 0);
> > - }
> > + if (!parser->queue[i].ibv_attr)
> > + continue;
> > + parser->queue[i].ibv_attr->priority = priority +
> > + hash_rxq_init[i].flow_priority;
> > }
> > }
> >
> > @@ -1158,7 +1178,7 @@ mlx5_flow_convert(struct rte_eth_dev *dev,
> > */
> > if (!parser->drop)
> > mlx5_flow_convert_finalise(parser);
> > - mlx5_flow_update_priority(parser, attr);
> > + mlx5_flow_update_priority(dev, parser, attr);
> > exit_free:
> > /* Only verification is expected, all resources should be released.
> */
> > if (!parser->create) {
> > @@ -3161,3 +3181,55 @@ mlx5_dev_filter_ctrl(struct rte_eth_dev *dev,
> > }
> > return 0;
> > }
> > +
> > +/**
> > + * Detect number of Verbs flow priorities supported.
> > + *
> > + * @param dev
> > + * Pointer to Ethernet device.
> > + *
> > + * @return
> > + * number of supported Verbs flow priority.
> > + */
> > +unsigned int
> > +priv_get_max_verbs_prio(struct rte_eth_dev *dev) {
> > + struct priv *priv = dev->data->dev_private;
> > + unsigned int verb_priorities = MLX5_VERBS_FLOW_PRIO_8;
> > + struct {
> > + struct ibv_flow_attr attr;
> > + struct ibv_flow_spec_eth eth;
> > + struct ibv_flow_spec_action_drop drop;
> > + } flow_attr = {
> > + .attr = {
> > + .num_of_specs = 2,
> > + },
> > + .eth = {
> > + .type = IBV_FLOW_SPEC_ETH,
> > + .size = sizeof(struct ibv_flow_spec_eth),
> > + },
> > + .drop = {
> > + .size = sizeof(struct ibv_flow_spec_action_drop),
> > + .type = IBV_FLOW_SPEC_ACTION_DROP,
> > + },
> > + };
> > + struct ibv_flow *flow;
> > +
> > + do {
> > + flow_attr.attr.priority = verb_priorities - 1;
> > + flow = mlx5_glue->create_flow(priv->flow_drop_queue->qp,
> > + &flow_attr.attr);
> > + if (flow) {
> > + claim_zero(mlx5_glue->destroy_flow(flow));
> > + /* Try more priorities. */
> > + verb_priorities *= 2;
> > + } else {
> > + /* Failed, restore last right number. */
> > + verb_priorities /= 2;
> > + break;
> > + }
> > + } while (1);
> > + DRV_LOG(INFO, "port %u Verbs flow priorities: %d",
> > + dev->data->port_id, verb_priorities);
>
> Please remove this developer log, it will confuse the user who will
> believe he have N priorities which is absolutely not the case.
How about change it to DEBUG level, this should be very useful in real deployment
trouble shooting.
I could append something like "user flow priorities: %d" to avoid confusion..
>
> > + return verb_priorities;
> > +}
> > diff --git a/drivers/net/mlx5/mlx5_trigger.c
> > b/drivers/net/mlx5/mlx5_trigger.c index 6bb4ffb14..d80a2e688 100644
> > --- a/drivers/net/mlx5/mlx5_trigger.c
> > +++ b/drivers/net/mlx5/mlx5_trigger.c
> > @@ -148,12 +148,6 @@ mlx5_dev_start(struct rte_eth_dev *dev)
> > int ret;
> >
> > dev->data->dev_started = 1;
> > - ret = mlx5_flow_create_drop_queue(dev);
> > - if (ret) {
> > - DRV_LOG(ERR, "port %u drop queue allocation failed: %s",
> > - dev->data->port_id, strerror(rte_errno));
> > - goto error;
> > - }
> > DRV_LOG(DEBUG, "port %u allocating and configuring hash Rx queues",
> > dev->data->port_id);
> > rte_mempool_walk(mlx5_mp2mr_iter, priv); @@ -202,7 +196,6 @@
> > mlx5_dev_start(struct rte_eth_dev *dev)
> > mlx5_traffic_disable(dev);
> > mlx5_txq_stop(dev);
> > mlx5_rxq_stop(dev);
> > - mlx5_flow_delete_drop_queue(dev);
> > rte_errno = ret; /* Restore rte_errno. */
> > return -rte_errno;
> > }
> > @@ -237,7 +230,6 @@ mlx5_dev_stop(struct rte_eth_dev *dev)
> > mlx5_rxq_stop(dev);
> > for (mr = LIST_FIRST(&priv->mr); mr; mr = LIST_FIRST(&priv->mr))
> > mlx5_mr_release(mr);
> > - mlx5_flow_delete_drop_queue(dev);
> > }
> >
> > /**
> > --
> > 2.13.3
>
> Thanks,
>
> --
> Nélio Laranjeiro
> 6WIND
next prev parent reply other threads:[~2018-04-13 13:10 UTC|newest]
Thread overview: 115+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20180410133415.189905-1-xuemingl%40mellanox.com>
2018-04-13 11:20 ` [dpdk-dev] [PATCH v3 00/14] mlx5 Rx tunnel offloading Xueming Li
2018-04-17 15:14 ` [dpdk-dev] [PATCH v4 00/11] " Xueming Li
2018-04-20 12:23 ` [dpdk-dev] [PATCH v5 " Xueming Li
2018-04-23 12:32 ` [dpdk-dev] [PATCH v6 " Xueming Li
2018-04-24 8:24 ` Nélio Laranjeiro
2018-04-24 8:25 ` Xueming(Steven) Li
2018-04-26 6:23 ` Shahaf Shuler
2018-04-23 12:33 ` [dpdk-dev] [PATCH v6 01/11] net/mlx5: support 16 hardware priorities Xueming Li
2018-04-23 12:33 ` [dpdk-dev] [PATCH v6 02/11] net/mlx5: support GRE tunnel flow Xueming Li
2018-04-23 12:55 ` Nélio Laranjeiro
2018-04-23 13:32 ` Xueming(Steven) Li
2018-04-23 13:46 ` Nélio Laranjeiro
2018-04-24 7:40 ` Xueming(Steven) Li
2018-04-24 8:21 ` Nélio Laranjeiro
2018-04-23 12:33 ` [dpdk-dev] [PATCH v6 03/11] net/mlx5: support L3 VXLAN flow Xueming Li
2018-04-23 12:33 ` [dpdk-dev] [PATCH v6 04/11] net/mlx5: support Rx tunnel type identification Xueming Li
2018-04-23 12:33 ` [dpdk-dev] [PATCH v6 05/11] net/mlx5: cleanup tunnel checksum offloads Xueming Li
2018-04-23 12:33 ` [dpdk-dev] [PATCH v6 06/11] net/mlx5: split flow RSS handling logic Xueming Li
2018-04-23 12:33 ` [dpdk-dev] [PATCH v6 07/11] net/mlx5: support tunnel RSS level Xueming Li
2018-04-23 12:33 ` [dpdk-dev] [PATCH v6 08/11] net/mlx5: add hardware flow debug dump Xueming Li
2018-04-26 10:09 ` Ferruh Yigit
2018-04-26 10:48 ` Shahaf Shuler
2018-04-23 12:33 ` [dpdk-dev] [PATCH v6 09/11] net/mlx5: introduce VXLAN-GPE tunnel type Xueming Li
2018-04-23 12:33 ` [dpdk-dev] [PATCH v6 10/11] net/mlx5: allow flow tunnel ID 0 with outer pattern Xueming Li
2018-04-23 12:33 ` [dpdk-dev] [PATCH v6 11/11] doc: update mlx5 guide on tunnel offloading Xueming Li
2018-04-26 11:00 ` Ferruh Yigit
2018-04-26 14:03 ` Xueming(Steven) Li
2018-04-20 12:23 ` [dpdk-dev] [PATCH v5 01/11] net/mlx5: support 16 hardware priorities Xueming Li
2018-04-20 12:23 ` [dpdk-dev] [PATCH v5 02/11] net/mlx5: support GRE tunnel flow Xueming Li
2018-04-20 12:23 ` [dpdk-dev] [PATCH v5 03/11] net/mlx5: support L3 VXLAN flow Xueming Li
2018-04-20 12:23 ` [dpdk-dev] [PATCH v5 04/11] net/mlx5: support Rx tunnel type identification Xueming Li
2018-04-23 7:40 ` Nélio Laranjeiro
2018-04-23 7:56 ` Xueming(Steven) Li
2018-04-20 12:23 ` [dpdk-dev] [PATCH v5 05/11] net/mlx5: cleanup tunnel checksum offloads Xueming Li
2018-04-20 12:23 ` [dpdk-dev] [PATCH v5 06/11] net/mlx5: split flow RSS handling logic Xueming Li
2018-04-20 12:23 ` [dpdk-dev] [PATCH v5 07/11] net/mlx5: support tunnel RSS level Xueming Li
2018-04-20 12:23 ` [dpdk-dev] [PATCH v5 08/11] net/mlx5: add hardware flow debug dump Xueming Li
2018-04-20 12:23 ` [dpdk-dev] [PATCH v5 09/11] net/mlx5: introduce VXLAN-GPE tunnel type Xueming Li
2018-04-20 12:23 ` [dpdk-dev] [PATCH v5 10/11] net/mlx5: allow flow tunnel ID 0 with outer pattern Xueming Li
2018-04-20 12:23 ` [dpdk-dev] [PATCH v5 11/11] doc: update mlx5 guide on tunnel offloading Xueming Li
2018-04-17 15:14 ` [dpdk-dev] [PATCH v4 01/11] net/mlx5: support 16 hardware priorities Xueming Li
2018-04-17 15:14 ` [dpdk-dev] [PATCH v4 02/11] net/mlx5: support GRE tunnel flow Xueming Li
2018-04-17 15:14 ` [dpdk-dev] [PATCH v4 03/11] net/mlx5: support L3 VXLAN flow Xueming Li
2018-04-18 6:48 ` Nélio Laranjeiro
2018-04-18 14:43 ` Xueming(Steven) Li
2018-04-18 15:08 ` Nélio Laranjeiro
2018-04-19 6:20 ` Xueming(Steven) Li
2018-04-19 6:55 ` Nélio Laranjeiro
2018-04-19 10:21 ` Xueming(Steven) Li
2018-04-19 11:15 ` Nélio Laranjeiro
2018-04-19 11:53 ` Xueming(Steven) Li
2018-04-19 12:18 ` Nélio Laranjeiro
2018-04-19 12:49 ` Xueming(Steven) Li
2018-04-19 13:40 ` Nélio Laranjeiro
2018-04-17 15:14 ` [dpdk-dev] [PATCH v4 04/11] net/mlx5: support Rx tunnel type identification Xueming Li
2018-04-18 6:50 ` Nélio Laranjeiro
2018-04-18 14:33 ` Xueming(Steven) Li
2018-04-18 15:06 ` Nélio Laranjeiro
2018-04-17 15:14 ` [dpdk-dev] [PATCH v4 05/11] net/mlx5: cleanup tunnel checksum offloads Xueming Li
2018-04-17 15:14 ` [dpdk-dev] [PATCH v4 06/11] net/mlx5: split flow RSS handling logic Xueming Li
2018-04-17 15:14 ` [dpdk-dev] [PATCH v4 07/11] net/mlx5: support tunnel RSS level Xueming Li
2018-04-18 6:55 ` Nélio Laranjeiro
2018-04-17 15:14 ` [dpdk-dev] [PATCH v4 08/11] net/mlx5: add hardware flow debug dump Xueming Li
2018-04-18 6:57 ` Nélio Laranjeiro
2018-04-17 15:14 ` [dpdk-dev] [PATCH v4 09/11] net/mlx5: introduce VXLAN-GPE tunnel type Xueming Li
2018-04-18 6:58 ` Nélio Laranjeiro
2018-04-17 15:14 ` [dpdk-dev] [PATCH v4 10/11] net/mlx5: allow flow tunnel ID 0 with outer pattern Xueming Li
2018-04-17 15:14 ` [dpdk-dev] [PATCH v4 11/11] doc: update mlx5 guide on tunnel offloading Xueming Li
2018-04-18 7:00 ` Nélio Laranjeiro
2018-04-13 11:20 ` [dpdk-dev] [PATCH v3 01/14] net/mlx5: support 16 hardware priorities Xueming Li
2018-04-13 11:58 ` Nélio Laranjeiro
2018-04-13 13:10 ` Xueming(Steven) Li [this message]
2018-04-13 13:46 ` Nélio Laranjeiro
2018-04-13 11:20 ` [dpdk-dev] [PATCH v3 02/14] net/mlx5: support GRE tunnel flow Xueming Li
2018-04-13 12:02 ` Nélio Laranjeiro
2018-04-13 11:20 ` [dpdk-dev] [PATCH v3 03/14] net/mlx5: support L3 VXLAN flow Xueming Li
2018-04-13 12:13 ` Nélio Laranjeiro
2018-04-13 13:51 ` Xueming(Steven) Li
2018-04-13 14:04 ` Xueming(Steven) Li
2018-04-13 11:20 ` [dpdk-dev] [PATCH v3 04/14] net/mlx5: support Rx tunnel type identification Xueming Li
2018-04-13 13:02 ` Nélio Laranjeiro
2018-04-14 12:57 ` Xueming(Steven) Li
2018-04-16 7:28 ` Nélio Laranjeiro
2018-04-16 8:05 ` Xueming(Steven) Li
2018-04-16 9:28 ` Adrien Mazarguil
2018-04-16 13:32 ` Xueming(Steven) Li
2018-04-16 13:47 ` Adrien Mazarguil
2018-04-16 15:27 ` Xueming(Steven) Li
2018-04-16 16:02 ` Adrien Mazarguil
2018-04-17 4:53 ` Xueming(Steven) Li
2018-04-17 7:20 ` Nélio Laranjeiro
2018-04-17 11:50 ` Xueming(Steven) Li
2018-04-13 11:20 ` [dpdk-dev] [PATCH v3 05/14] net/mlx5: cleanup tunnel checksum offloads Xueming Li
2018-04-13 11:20 ` [dpdk-dev] [PATCH v3 06/14] net/mlx5: split flow RSS handling logic Xueming Li
2018-04-13 11:20 ` [dpdk-dev] [PATCH v3 07/14] net/mlx5: support tunnel RSS level Xueming Li
2018-04-13 13:27 ` Nélio Laranjeiro
2018-04-14 10:12 ` Xueming(Steven) Li
2018-04-16 12:25 ` Nélio Laranjeiro
2018-04-13 11:20 ` [dpdk-dev] [PATCH v3 08/14] net/mlx5: add hardware flow debug dump Xueming Li
2018-04-13 13:29 ` Nélio Laranjeiro
2018-04-13 11:20 ` [dpdk-dev] [PATCH v3 09/14] net/mlx5: introduce VXLAN-GPE tunnel type Xueming Li
2018-04-13 13:32 ` Nélio Laranjeiro
2018-04-13 11:20 ` [dpdk-dev] [PATCH v3 10/14] net/mlx5: allow flow tunnel ID 0 with outer pattern Xueming Li
2018-04-13 11:20 ` [dpdk-dev] [PATCH v3 11/14] net/mlx5: support MPLS-in-GRE and MPLS-in-UDP Xueming Li
2018-04-13 13:37 ` Nélio Laranjeiro
2018-04-13 14:48 ` Xueming(Steven) Li
2018-04-13 14:55 ` Nélio Laranjeiro
2018-04-13 15:22 ` Xueming(Steven) Li
2018-04-16 8:14 ` Nélio Laranjeiro
2018-04-13 11:20 ` [dpdk-dev] [PATCH v3 12/14] doc: update mlx5 guide on tunnel offloading Xueming Li
2018-04-13 13:38 ` Nélio Laranjeiro
2018-04-13 11:20 ` [dpdk-dev] [PATCH v3 13/14] net/mlx5: fix invalid flow item check Xueming Li
2018-04-13 13:40 ` Nélio Laranjeiro
2018-04-13 11:20 ` [dpdk-dev] [PATCH v3 14/14] net/mlx5: support RSS configuration in isolated mode Xueming Li
2018-04-13 13:43 ` Nélio Laranjeiro
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=VI1PR05MB16784A266D5B7D4085F73B5FACB30@VI1PR05MB1678.eurprd05.prod.outlook.com \
--to=xuemingl@mellanox.com \
--cc=dev@dpdk.org \
--cc=nelio.laranjeiro@6wind.com \
--cc=shahafs@mellanox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).