From: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
To: Junfeng Guo <junfeng.guo@intel.com>,
qi.z.zhang@intel.com, jingjing.wu@intel.com,
beilei.xing@intel.com
Cc: dev@dpdk.org, Xiaoyun Li <xiaoyun.li@intel.com>
Subject: Re: [PATCH v11 03/18] net/idpf: add Tx queue setup
Date: Tue, 25 Oct 2022 12:40:11 +0300 [thread overview]
Message-ID: <a39dca5d-5e4f-8071-5532-450ce1c398c1@oktetlabs.ru> (raw)
In-Reply-To: <20221024131227.1062446-4-junfeng.guo@intel.com>
On 10/24/22 16:12, Junfeng Guo wrote:
> Add support for tx_queue_setup ops.
>
> In the single queue model, the same descriptor queue is used by SW to
> post buffer descriptors to HW and by HW to post completed descriptors
> to SW.
>
> In the split queue model, "RX buffer queues" are used to pass
> descriptor buffers from SW to HW while Rx queues are used only to
> pass the descriptor completions, that is, descriptors that point
> to completed buffers, from HW to SW. This is contrary to the single
> queue model in which Rx queues are used for both purposes.
>
> Signed-off-by: Beilei Xing <beilei.xing@intel.com>
> Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
> Signed-off-by: Junfeng Guo <junfeng.guo@intel.com>
[snip]
> diff --git a/drivers/net/idpf/idpf_ethdev.c b/drivers/net/idpf/idpf_ethdev.c
> index 75695085f8..c0307128be 100644
> --- a/drivers/net/idpf/idpf_ethdev.c
> +++ b/drivers/net/idpf/idpf_ethdev.c
> @@ -10,6 +10,7 @@
> #include <rte_dev.h>
>
> #include "idpf_ethdev.h"
> +#include "idpf_rxtx.h"
>
> #define IDPF_TX_SINGLE_Q "tx_single"
> #define IDPF_RX_SINGLE_Q "rx_single"
> @@ -36,6 +37,7 @@ static void idpf_adapter_rel(struct idpf_adapter *adapter);
> static const struct eth_dev_ops idpf_eth_dev_ops = {
> .dev_configure = idpf_dev_configure,
> .dev_close = idpf_dev_close,
> + .tx_queue_setup = idpf_tx_queue_setup,
> .dev_infos_get = idpf_dev_info_get,
> };
>
> @@ -54,11 +56,23 @@ idpf_dev_info_get(struct rte_eth_dev *dev, struct rte_eth_dev_info *dev_info)
> dev_info->min_mtu = RTE_ETHER_MIN_MTU;
>
> dev_info->max_mac_addrs = IDPF_NUM_MACADDR_MAX;
> - dev_info->dev_capa = 0;
> + dev_info->dev_capa = RTE_ETH_DEV_CAPA_RUNTIME_TX_QUEUE_SETUP;
I've played with two Intel PMDs: i40e and ice and both have
bugs in runtime queue setup. That's why I'm trying to review
it carefully in a new driver. So, I'd like to repeat once
again: the feature does not make sense without device start
support since corresponding code cann't be in-place and
cannot be reviewed here.
> dev_info->rx_offload_capa = 0;
> -
Unrlated change
> dev_info->tx_offload_capa = 0;
>
> + dev_info->default_txconf = (struct rte_eth_txconf) {
> + .tx_free_thresh = IDPF_DEFAULT_TX_FREE_THRESH,
> + .tx_rs_thresh = IDPF_DEFAULT_TX_RS_THRESH,
> + .offloads = 0,
There is no necessity to initialize to zero explicitly since
the compiler does it for you implicitly.
> + };
> +
> + dev_info->tx_desc_lim = (struct rte_eth_desc_lim) {
> + .nb_max = IDPF_MAX_RING_DESC,
> + .nb_min = IDPF_MIN_RING_DESC,
> + .nb_align = IDPF_ALIGN_RING_DESC,
> + };
> +
> +
> return 0;
> }
>
> diff --git a/drivers/net/idpf/idpf_rxtx.c b/drivers/net/idpf/idpf_rxtx.c
> new file mode 100644
> index 0000000000..df0ed772c1
> --- /dev/null
> +++ b/drivers/net/idpf/idpf_rxtx.c
> @@ -0,0 +1,371 @@
> +/* SPDX-License-Identifier: BSD-3-Clause
> + * Copyright(c) 2022 Intel Corporation
> + */
> +
> +#include <ethdev_driver.h>
> +#include <rte_net.h>
> +
> +#include "idpf_ethdev.h"
> +#include "idpf_rxtx.h"
> +
> +static inline int
There is no point to make it inline. It is a control path.
Please, keep it to the compiler to do its job.
> +check_tx_thresh(uint16_t nb_desc, uint16_t tx_rs_thresh,
> + uint16_t tx_free_thresh)
[snip]
> +static inline void
> +reset_split_tx_descq(struct idpf_tx_queue *txq)
same here since it looks like control path as well.
[snip]
> +{
> + struct idpf_tx_entry *txe;
> + uint32_t i, size;
> + uint16_t prev;
> +
> + if (txq == NULL) {
> + PMD_DRV_LOG(DEBUG, "Pointer to txq is NULL");
> + return;
> + }
> +
> + size = sizeof(struct idpf_flex_tx_sched_desc) * txq->nb_tx_desc;
> + for (i = 0; i < size; i++)
> + ((volatile char *)txq->desc_ring)[i] = 0;
Please, add a comment which explains why volatile is
required here.
> +
> + txe = txq->sw_ring;
> + prev = (uint16_t)(txq->sw_nb_desc - 1);
> + for (i = 0; i < txq->sw_nb_desc; i++) {
> + txe[i].mbuf = NULL;
> + txe[i].last_id = i;
> + txe[prev].next_id = i;
> + prev = i;
> + }
> +
> + txq->tx_tail = 0;
> + txq->nb_used = 0;
> +
> + /* Use this as next to clean for split desc queue */
> + txq->last_desc_cleaned = 0;
> + txq->sw_tail = 0;
> + txq->nb_free = txq->nb_tx_desc - 1;
> +}
> +
> +static inline void
> +reset_split_tx_complq(struct idpf_tx_queue *cq)
same here
> +{
> + uint32_t i, size;
> +
> + if (cq == NULL) {
> + PMD_DRV_LOG(DEBUG, "Pointer to complq is NULL");
> + return;
> + }
> +
> + size = sizeof(struct idpf_splitq_tx_compl_desc) * cq->nb_tx_desc;
> + for (i = 0; i < size; i++)
> + ((volatile char *)cq->compl_ring)[i] = 0;
same ehre
> +
> + cq->tx_tail = 0;
> + cq->expected_gen_id = 1;
> +}
> +
> +static inline void
> +reset_single_tx_queue(struct idpf_tx_queue *txq)
same here
> +{
> + struct idpf_tx_entry *txe;
> + uint32_t i, size;
> + uint16_t prev;
> +
> + if (txq == NULL) {
> + PMD_DRV_LOG(DEBUG, "Pointer to txq is NULL");
> + return;
> + }
> +
> + txe = txq->sw_ring;
> + size = sizeof(struct idpf_flex_tx_desc) * txq->nb_tx_desc;
> + for (i = 0; i < size; i++)
> + ((volatile char *)txq->tx_ring)[i] = 0;
same here
> +
> + prev = (uint16_t)(txq->nb_tx_desc - 1);
> + for (i = 0; i < txq->nb_tx_desc; i++) {
> + txq->tx_ring[i].qw1.cmd_dtype =
> + rte_cpu_to_le_16(IDPF_TX_DESC_DTYPE_DESC_DONE);
> + txe[i].mbuf = NULL;
> + txe[i].last_id = i;
> + txe[prev].next_id = i;
> + prev = i;
> + }
> +
> + txq->tx_tail = 0;
> + txq->nb_used = 0;
> +
> + txq->last_desc_cleaned = txq->nb_tx_desc - 1;
> + txq->nb_free = txq->nb_tx_desc - 1;
> +
> + txq->next_dd = txq->rs_thresh - 1;
> + txq->next_rs = txq->rs_thresh - 1;
> +}
> +
> +static int
> +idpf_tx_split_queue_setup(struct rte_eth_dev *dev, uint16_t queue_idx,
> + uint16_t nb_desc, unsigned int socket_id,
> + const struct rte_eth_txconf *tx_conf)
> +{
> + struct idpf_vport *vport = dev->data->dev_private;
> + struct idpf_adapter *adapter = vport->adapter;
> + uint16_t tx_rs_thresh, tx_free_thresh;
> + struct idpf_hw *hw = &adapter->hw;
> + struct idpf_tx_queue *txq, *cq;
> + const struct rte_memzone *mz;
> + uint32_t ring_size;
> + uint64_t offloads;
> +
> + offloads = tx_conf->offloads | dev->data->dev_conf.txmode.offloads;
> +
> + if (nb_desc % IDPF_ALIGN_RING_DESC != 0 ||
> + nb_desc > IDPF_MAX_RING_DESC ||
> + nb_desc < IDPF_MIN_RING_DESC) {
> + PMD_INIT_LOG(ERR, "Number (%u) of transmit descriptors is invalid",
> + nb_desc);
> + return -EINVAL;
> + }
You don't need to check it here, since ethdev does it for you
before driver operation invocation.
> +
> + tx_rs_thresh = (uint16_t)((tx_conf->tx_rs_thresh) ?
compare vs 0 explicitly
> + tx_conf->tx_rs_thresh : IDPF_DEFAULT_TX_RS_THRESH);
> + tx_free_thresh = (uint16_t)((tx_conf->tx_free_thresh) ?
compare vs 0 explicitly
> + tx_conf->tx_free_thresh : IDPF_DEFAULT_TX_FREE_THRESH);
> + if (check_tx_thresh(nb_desc, tx_rs_thresh, tx_free_thresh) != 0)
> + return -EINVAL;
> +
> + /* Allocate the TX queue data structure. */
> + txq = rte_zmalloc_socket("idpf split txq",
> + sizeof(struct idpf_tx_queue),
> + RTE_CACHE_LINE_SIZE,
> + socket_id);
> + if (txq == NULL) {
> + PMD_INIT_LOG(ERR, "Failed to allocate memory for tx queue structure");
> + return -ENOMEM;
> + }
> +
> + txq->nb_tx_desc = nb_desc;
> + txq->rs_thresh = tx_rs_thresh;
> + txq->free_thresh = tx_free_thresh;
> + txq->queue_id = vport->chunks_info.tx_start_qid + queue_idx;
> + txq->port_id = dev->data->port_id;
> + txq->offloads = offloads;
> + txq->tx_deferred_start = tx_conf->tx_deferred_start;
Deferred start is not supported at this point and
request with deferred start on should be rejected.
> +
> + /* Allocate software ring */
> + txq->sw_nb_desc = 2 * nb_desc;
> + txq->sw_ring =
> + rte_zmalloc_socket("idpf split tx sw ring",
> + sizeof(struct idpf_tx_entry) *
> + txq->sw_nb_desc,
> + RTE_CACHE_LINE_SIZE,
> + socket_id);
> + if (txq->sw_ring == NULL) {
> + PMD_INIT_LOG(ERR, "Failed to allocate memory for SW TX ring");
> + rte_free(txq);
> + return -ENOMEM;
> + }
> +
> + /* Allocate TX hardware ring descriptors. */
> + ring_size = sizeof(struct idpf_flex_tx_sched_desc) * txq->nb_tx_desc;
> + ring_size = RTE_ALIGN(ring_size, IDPF_DMA_MEM_ALIGN);
> + mz = rte_eth_dma_zone_reserve(dev, "split_tx_ring", queue_idx,
> + ring_size, IDPF_RING_BASE_ALIGN,
> + socket_id);
> + if (mz == NULL) {
> + PMD_INIT_LOG(ERR, "Failed to reserve DMA memory for TX");
> + rte_free(txq->sw_ring);
> + rte_free(txq);
> + return -ENOMEM;
> + }
> + txq->tx_ring_phys_addr = mz->iova;
> + txq->desc_ring = (struct idpf_flex_tx_sched_desc *)mz->addr;
> +
> + txq->mz = mz;
> + reset_split_tx_descq(txq);
> + txq->qtx_tail = hw->hw_addr + (vport->chunks_info.tx_qtail_start +
> + queue_idx * vport->chunks_info.tx_qtail_spacing);
> +
> + /* Allocate the TX completion queue data structure. */
> + txq->complq = rte_zmalloc_socket("idpf splitq cq",
> + sizeof(struct idpf_tx_queue),
> + RTE_CACHE_LINE_SIZE,
> + socket_id);
> + cq = txq->complq;
> + if (cq == NULL) {
> + PMD_INIT_LOG(ERR, "Failed to allocate memory for tx queue structure");
Free previously allocated resources including txq->complq.
However, I'd recomment to use goto style to do cleanup in
this case.
> + return -ENOMEM;
> + }
> + cq->nb_tx_desc = 2 * nb_desc;
> + cq->queue_id = vport->chunks_info.tx_compl_start_qid + queue_idx;
> + cq->port_id = dev->data->port_id;
> + cq->txqs = dev->data->tx_queues;
> + cq->tx_start_qid = vport->chunks_info.tx_start_qid;
> +
> + ring_size = sizeof(struct idpf_splitq_tx_compl_desc) * cq->nb_tx_desc;
> + ring_size = RTE_ALIGN(ring_size, IDPF_DMA_MEM_ALIGN);
> + mz = rte_eth_dma_zone_reserve(dev, "tx_split_compl_ring", queue_idx,
> + ring_size, IDPF_RING_BASE_ALIGN,
> + socket_id);
> + if (mz == NULL) {
> + PMD_INIT_LOG(ERR, "Failed to reserve DMA memory for TX completion queue");
> + rte_free(txq->sw_ring);
> + rte_free(txq);
Free txq->complq and txq->mz
> + return -ENOMEM;
> + }
> + cq->tx_ring_phys_addr = mz->iova;
> + cq->compl_ring = (struct idpf_splitq_tx_compl_desc *)mz->addr;
> + cq->mz = mz;
> + reset_split_tx_complq(cq);
> +
> + txq->q_set = true;
> + dev->data->tx_queues[queue_idx] = txq;
> +
> + return 0;
> +}
> +
> +static int
> +idpf_tx_single_queue_setup(struct rte_eth_dev *dev, uint16_t queue_idx,
> + uint16_t nb_desc, unsigned int socket_id,
> + const struct rte_eth_txconf *tx_conf)
> +{
> + struct idpf_vport *vport = dev->data->dev_private;
> + struct idpf_adapter *adapter = vport->adapter;
> + uint16_t tx_rs_thresh, tx_free_thresh;
> + struct idpf_hw *hw = &adapter->hw;
> + const struct rte_memzone *mz;
> + struct idpf_tx_queue *txq;
> + uint32_t ring_size;
> + uint64_t offloads;
> +
> + offloads = tx_conf->offloads | dev->data->dev_conf.txmode.offloads;
> +
> + if (nb_desc % IDPF_ALIGN_RING_DESC != 0 ||
> + nb_desc > IDPF_MAX_RING_DESC ||
> + nb_desc < IDPF_MIN_RING_DESC) {
> + PMD_INIT_LOG(ERR, "Number (%u) of transmit descriptors is invalid",
> + nb_desc);
> + return -EINVAL;
> + }
You don't need to check it here, since ethdev does it for you
before driver operation invocation.
> +
> + tx_rs_thresh = (uint16_t)((tx_conf->tx_rs_thresh) ?
> + tx_conf->tx_rs_thresh : IDPF_DEFAULT_TX_RS_THRESH);
> + tx_free_thresh = (uint16_t)((tx_conf->tx_free_thresh) ?
> + tx_conf->tx_free_thresh : IDPF_DEFAULT_TX_FREE_THRESH);
> + if (check_tx_thresh(nb_desc, tx_rs_thresh, tx_free_thresh) != 0)
> + return -EINVAL;
> +
> + /* Allocate the TX queue data structure. */
> + txq = rte_zmalloc_socket("idpf txq",
> + sizeof(struct idpf_tx_queue),
> + RTE_CACHE_LINE_SIZE,
> + socket_id);
> + if (txq == NULL) {
> + PMD_INIT_LOG(ERR, "Failed to allocate memory for tx queue structure");
> + return -ENOMEM;
> + }
> +
> + /* TODO: vlan offload */
> +
> + txq->nb_tx_desc = nb_desc;
> + txq->rs_thresh = tx_rs_thresh;
> + txq->free_thresh = tx_free_thresh;
> + txq->queue_id = vport->chunks_info.tx_start_qid + queue_idx;
> + txq->port_id = dev->data->port_id;
> + txq->offloads = offloads;
> + txq->tx_deferred_start = tx_conf->tx_deferred_start;
same here
> +
> + /* Allocate software ring */
> + txq->sw_ring =
> + rte_zmalloc_socket("idpf tx sw ring",
> + sizeof(struct idpf_tx_entry) * nb_desc,
> + RTE_CACHE_LINE_SIZE,
> + socket_id);
> + if (txq->sw_ring == NULL) {
> + PMD_INIT_LOG(ERR, "Failed to allocate memory for SW TX ring");
> + rte_free(txq);
> + return -ENOMEM;
> + }
> +
> + /* Allocate TX hardware ring descriptors. */
> + ring_size = sizeof(struct idpf_flex_tx_desc) * nb_desc;
> + ring_size = RTE_ALIGN(ring_size, IDPF_DMA_MEM_ALIGN);
> + mz = rte_eth_dma_zone_reserve(dev, "tx_ring", queue_idx,
> + ring_size, IDPF_RING_BASE_ALIGN,
> + socket_id);
> + if (mz == NULL) {
> + PMD_INIT_LOG(ERR, "Failed to reserve DMA memory for TX");
> + rte_free(txq->sw_ring);
> + rte_free(txq);
> + return -ENOMEM;
> + }
> +
> + txq->tx_ring_phys_addr = mz->iova;
> + txq->tx_ring = (struct idpf_flex_tx_desc *)mz->addr;
> +
> + txq->mz = mz;
> + reset_single_tx_queue(txq);
> + txq->q_set = true;
> + dev->data->tx_queues[queue_idx] = txq;
> + txq->qtx_tail = hw->hw_addr + (vport->chunks_info.tx_qtail_start +
> + queue_idx * vport->chunks_info.tx_qtail_spacing);
I'm sorry, but it looks like too much code is duplicated.
I guess it could be a shared function to avoid it.
> +
> + return 0;
> +}
> +
> +int
> +idpf_tx_queue_setup(struct rte_eth_dev *dev, uint16_t queue_idx,
> + uint16_t nb_desc, unsigned int socket_id,
> + const struct rte_eth_txconf *tx_conf)
> +{
> + struct idpf_vport *vport = dev->data->dev_private;
> +
> + if (vport->txq_model == VIRTCHNL2_QUEUE_MODEL_SINGLE)
> + return idpf_tx_single_queue_setup(dev, queue_idx, nb_desc,
> + socket_id, tx_conf);
> + else
> + return idpf_tx_split_queue_setup(dev, queue_idx, nb_desc,
> + socket_id, tx_conf);
> +}
[snip]
next prev parent reply other threads:[~2022-10-25 9:40 UTC|newest]
Thread overview: 376+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-08-03 11:30 [PATCH 00/13] add support for idpf PMD in DPDK Junfeng Guo
2022-08-03 11:30 ` [PATCH 01/13] net/idpf/base: introduce base code Junfeng Guo
2022-08-03 11:30 ` [PATCH 02/13] net/idpf/base: add logs and OS specific implementation Junfeng Guo
2022-08-03 11:30 ` [PATCH 03/13] net/idpf: support device initialization Junfeng Guo
2022-08-03 15:11 ` Stephen Hemminger
2022-08-08 4:43 ` Guo, Junfeng
2022-10-31 18:00 ` Ali Alnubani
2022-11-01 6:55 ` Xing, Beilei
2022-11-02 15:31 ` Raslan Darawsheh
2022-11-02 15:52 ` Thomas Monjalon
2022-11-03 0:56 ` Xing, Beilei
2022-08-03 11:30 ` [PATCH 04/13] net/idpf: add queue operations Junfeng Guo
2022-08-03 15:16 ` Stephen Hemminger
2022-08-08 4:44 ` Guo, Junfeng
2022-08-03 11:30 ` [PATCH 05/13] net/idpf: add support to get device information Junfeng Guo
2022-08-03 11:30 ` [PATCH 06/13] net/idpf: add support to get packet type Junfeng Guo
2022-08-03 11:30 ` [PATCH 07/13] net/idpf: add support to update link status Junfeng Guo
2022-08-03 11:30 ` [PATCH 08/13] net/idpf: add basic Rx/Tx datapath Junfeng Guo
2022-08-03 11:31 ` [PATCH 09/13] net/idpf: add support for RSS Junfeng Guo
2022-08-03 11:31 ` [PATCH 10/13] net/idpf: add mtu configuration Junfeng Guo
2022-08-03 11:31 ` [PATCH 11/13] net/idpf: add hw statistics Junfeng Guo
2022-08-03 11:31 ` [PATCH 12/13] net/idpf: support write back based on ITR expire Junfeng Guo
2022-08-03 11:31 ` [PATCH 13/13] net/idpf: add AVX512 data path for single queue model Junfeng Guo
2022-09-05 10:58 ` [PATCH v2 00/14] add support for idpf PMD in DPDK Junfeng Guo
2022-09-05 10:58 ` [PATCH v2 01/14] net/idpf/base: introduce base code Junfeng Guo
2022-10-03 13:20 ` Andrew Rybchenko
2022-10-14 9:18 ` Guo, Junfeng
2022-09-05 10:58 ` [PATCH v2 02/14] net/idpf/base: add logs and OS specific implementation Junfeng Guo
2022-10-03 13:20 ` Andrew Rybchenko
2022-10-14 9:18 ` Guo, Junfeng
2022-10-12 8:07 ` Wu, Wenjun1
2022-09-05 10:58 ` [PATCH v2 03/14] net/idpf: add support for device initialization Junfeng Guo
2022-09-21 5:41 ` Xing, Beilei
2022-09-21 6:04 ` Xing, Beilei
2022-10-03 13:44 ` Andrew Rybchenko
2022-10-14 9:18 ` Guo, Junfeng
2022-10-10 7:48 ` Wu, Wenjun1
2022-09-05 10:58 ` [PATCH v2 04/14] net/idpf: add support for queue operations Junfeng Guo
2022-10-03 13:47 ` Andrew Rybchenko
2022-10-14 9:18 ` Guo, Junfeng
2022-09-05 10:58 ` [PATCH v2 05/14] net/idpf: add support for device information get Junfeng Guo
2022-10-03 13:53 ` Andrew Rybchenko
2022-09-05 10:58 ` [PATCH v2 06/14] net/idpf: add support for packet type get Junfeng Guo
2022-10-03 13:58 ` Andrew Rybchenko
2022-10-14 9:18 ` Guo, Junfeng
2022-09-05 10:58 ` [PATCH v2 07/14] net/idpf: add support for link status update Junfeng Guo
2022-09-05 10:58 ` [PATCH v2 08/14] net/idpf: add support for basic Rx/Tx datapath Junfeng Guo
2022-10-03 14:02 ` Andrew Rybchenko
2022-10-14 9:18 ` Guo, Junfeng
2022-09-05 10:58 ` [PATCH v2 09/14] net/idpf: add support for RSS Junfeng Guo
2022-10-03 14:10 ` Andrew Rybchenko
2022-09-05 10:58 ` [PATCH v2 10/14] net/idpf: add support for mtu configuration Junfeng Guo
2022-10-03 14:12 ` Andrew Rybchenko
2022-10-14 9:18 ` Guo, Junfeng
2022-09-05 10:58 ` [PATCH v2 11/14] net/idpf: add support for hw statistics Junfeng Guo
2022-09-05 10:58 ` [PATCH v2 12/14] net/idpf: add support for write back based on ITR expire Junfeng Guo
2022-09-05 10:58 ` [PATCH v2 13/14] net/idpf: add AVX512 data path for single queue model Junfeng Guo
2022-10-03 14:20 ` Andrew Rybchenko
2022-10-14 9:19 ` Guo, Junfeng
2022-10-10 8:06 ` Wu, Wenjun1
2022-09-05 10:58 ` [PATCH v2 14/14] net/idpf: add support for timestamp offload Junfeng Guo
2022-10-03 14:22 ` Andrew Rybchenko
2022-10-14 9:19 ` Guo, Junfeng
2022-10-10 7:56 ` Wu, Wenjun1
2022-10-03 13:31 ` [PATCH v2 00/14] add support for idpf PMD in DPDK Andrew Rybchenko
2022-10-03 14:36 ` Andrew Rybchenko
2022-10-18 11:09 ` Guo, Junfeng
2022-10-18 11:12 ` [PATCH v3 00/15] " Junfeng Guo
2022-10-18 11:12 ` [PATCH v3 01/15] common/idpf: introduce common library Junfeng Guo
2022-10-19 10:37 ` [PATCH v4 00/14] add support for idpf PMD in DPDK Junfeng Guo
2022-10-19 10:37 ` [PATCH v4 01/14] common/idpf: introduce common library Junfeng Guo
2022-10-19 11:03 ` [PATCH v5 00/14] add support for idpf PMD in DPDK Junfeng Guo
2022-10-19 11:03 ` [PATCH v5 01/14] common/idpf: introduce common library Junfeng Guo
2022-10-19 14:54 ` [PATCH v6 00/14] add support for idpf PMD in DPDK Junfeng Guo
2022-10-19 14:54 ` [PATCH v6 01/14] common/idpf: introduce common library Junfeng Guo
2022-10-20 2:41 ` [PATCH v7 00/14] add support for idpf PMD in DPDK Junfeng Guo
2022-10-20 2:41 ` [PATCH v7 01/14] common/idpf: introduce common library Junfeng Guo
2022-10-20 2:41 ` [PATCH v7 02/14] net/idpf: add support for device initialization Junfeng Guo
2022-10-20 2:41 ` [PATCH v7 03/14] net/idpf: add queue setup and release in single queue model Junfeng Guo
2022-10-20 2:41 ` [PATCH v7 04/14] net/idpf: add queue setup and release in split " Junfeng Guo
2022-10-20 2:41 ` [PATCH v7 05/14] net/idpf: add support for queue start and stop Junfeng Guo
2022-10-20 2:41 ` [PATCH v7 06/14] net/idpf: add support for device information get Junfeng Guo
2022-10-20 2:41 ` [PATCH v7 07/14] net/idpf: add support for packet type get Junfeng Guo
2022-10-20 2:41 ` [PATCH v7 08/14] net/idpf: add support for basic Rx/Tx datapath Junfeng Guo
2022-10-20 2:41 ` [PATCH v7 09/14] net/idpf: add support for Rx/Tx offloading Junfeng Guo
2022-10-20 2:41 ` [PATCH v7 10/14] net/idpf: add support for RSS Junfeng Guo
2022-10-20 2:41 ` [PATCH v7 11/14] net/idpf: add support for MTU configuration Junfeng Guo
2022-10-20 2:41 ` [PATCH v7 12/14] net/idpf: add support for write back based on ITR expire Junfeng Guo
2022-10-20 2:41 ` [PATCH v7 13/14] net/idpf: add AVX512 data path for single queue model Junfeng Guo
2022-10-20 2:41 ` [PATCH v7 14/14] net/idpf: add support for timestamp offload Junfeng Guo
2022-10-20 6:29 ` [PATCH v8 00/14] add support for idpf PMD in DPDK Junfeng Guo
2022-10-20 6:29 ` [PATCH v8 01/14] common/idpf: introduce common library Junfeng Guo
2022-10-21 5:18 ` [PATCH v9 00/14] add support for idpf PMD in DPDK Junfeng Guo
2022-10-21 5:18 ` [PATCH v9 01/14] common/idpf: introduce common library Junfeng Guo
2022-10-21 6:40 ` Andrew Rybchenko
2022-10-21 12:35 ` Xing, Beilei
2022-10-21 12:38 ` Andrew Rybchenko
2022-10-21 12:46 ` Zhang, Qi Z
2022-10-24 13:01 ` [PATCH v10 00/14] add support for idpf PMD in DPDK Junfeng Guo
2022-10-24 13:01 ` [PATCH v10 01/14] net/idpf: add support for device start and stop Junfeng Guo
2022-10-24 13:12 ` [PATCH v11 00/18] add support for idpf PMD in DPDK Junfeng Guo
2022-10-24 13:12 ` [PATCH v11 01/18] common/idpf: introduce common library Junfeng Guo
2022-10-26 10:10 ` [PATCH v12 00/18] add support for idpf PMD in DPDK Junfeng Guo
2022-10-26 10:10 ` [PATCH v12 01/18] common/idpf: introduce common library Junfeng Guo
2022-10-27 5:44 ` [PATCH v13 00/18] add support for idpf PMD in DPDK Junfeng Guo
2022-10-27 5:44 ` [PATCH v13 01/18] common/idpf: introduce common library Junfeng Guo
2022-10-27 7:47 ` [PATCH v14 00/18] add support for idpf PMD in DPDK Junfeng Guo
2022-10-27 7:47 ` [PATCH v14 01/18] common/idpf: introduce common library Junfeng Guo
2022-10-27 7:47 ` [PATCH v14 02/18] net/idpf: add support for device initialization Junfeng Guo
2022-10-28 15:35 ` Andrew Rybchenko
2022-10-28 17:22 ` Xing, Beilei
2022-10-27 7:47 ` [PATCH v14 03/18] net/idpf: add Tx queue setup Junfeng Guo
2022-10-27 7:47 ` [PATCH v14 04/18] net/idpf: add Rx " Junfeng Guo
2022-10-27 7:47 ` [PATCH v14 05/18] net/idpf: add support for device start and stop Junfeng Guo
2022-10-28 15:45 ` Andrew Rybchenko
2022-10-27 7:47 ` [PATCH v14 06/18] net/idpf: add support for queue start Junfeng Guo
2022-10-28 15:50 ` Andrew Rybchenko
2022-10-28 17:34 ` Xing, Beilei
2022-10-27 7:47 ` [PATCH v14 07/18] net/idpf: add support for queue stop Junfeng Guo
2022-10-27 7:47 ` [PATCH v14 08/18] net/idpf: add queue release Junfeng Guo
2022-10-27 7:47 ` [PATCH v14 09/18] net/idpf: add support for MTU configuration Junfeng Guo
2022-10-27 7:47 ` [PATCH v14 10/18] net/idpf: add support for basic Rx datapath Junfeng Guo
2022-10-27 7:47 ` [PATCH v14 11/18] net/idpf: add support for basic Tx datapath Junfeng Guo
2022-10-27 7:47 ` [PATCH v14 12/18] net/idpf: support parsing packet type Junfeng Guo
2022-10-27 7:47 ` [PATCH v14 13/18] net/idpf: add support for write back based on ITR expire Junfeng Guo
2022-10-27 7:47 ` [PATCH v14 14/18] net/idpf: add support for RSS Junfeng Guo
2022-10-27 7:47 ` [PATCH v14 15/18] net/idpf: add support for Rx offloading Junfeng Guo
2022-10-27 7:47 ` [PATCH v14 16/18] net/idpf: add support for Tx offloading Junfeng Guo
2022-10-27 7:47 ` [PATCH v14 17/18] net/idpf: add AVX512 data path for single queue model Junfeng Guo
2022-10-27 7:47 ` [PATCH v14 18/18] net/idpf: add support for timestamp offload Junfeng Guo
2022-10-29 3:27 ` [PATCH v15 00/18] add support for idpf PMD in DPDK beilei.xing
2022-10-29 3:27 ` [PATCH v15 01/18] common/idpf: introduce common library beilei.xing
2022-10-29 3:27 ` [PATCH v15 02/18] net/idpf: add support for device initialization beilei.xing
2022-10-29 3:27 ` [PATCH v15 03/18] net/idpf: add Tx queue setup beilei.xing
2022-10-29 3:27 ` [PATCH v15 04/18] net/idpf: add Rx " beilei.xing
2022-10-29 3:27 ` [PATCH v15 05/18] net/idpf: add support for device start and stop beilei.xing
2022-10-29 3:27 ` [PATCH v15 06/18] net/idpf: add support for queue start beilei.xing
2022-10-29 3:27 ` [PATCH v15 07/18] net/idpf: add support for queue stop beilei.xing
2022-10-29 3:27 ` [PATCH v15 08/18] net/idpf: add queue release beilei.xing
2022-10-29 3:27 ` [PATCH v15 09/18] net/idpf: add support for MTU configuration beilei.xing
2022-10-29 3:27 ` [PATCH v15 10/18] net/idpf: add support for basic Rx datapath beilei.xing
2022-10-29 3:27 ` [PATCH v15 11/18] net/idpf: add support for basic Tx datapath beilei.xing
2022-10-29 3:27 ` [PATCH v15 12/18] net/idpf: support parsing packet type beilei.xing
2022-10-29 3:27 ` [PATCH v15 13/18] net/idpf: add support for write back based on ITR expire beilei.xing
2022-10-29 3:27 ` [PATCH v15 14/18] net/idpf: add support for RSS beilei.xing
2022-10-29 3:27 ` [PATCH v15 15/18] net/idpf: add support for Rx offloading beilei.xing
2022-10-29 3:27 ` [PATCH v15 16/18] net/idpf: add support for Tx offloading beilei.xing
2022-10-29 3:27 ` [PATCH v15 17/18] net/idpf: add AVX512 data path for single queue model beilei.xing
2022-10-29 3:27 ` [PATCH v15 18/18] net/idpf: add support for timestamp offload beilei.xing
2022-10-29 14:48 ` [PATCH v15 00/18] add support for idpf PMD in DPDK Andrew Rybchenko
2022-10-31 2:26 ` Xing, Beilei
2022-10-31 3:36 ` [PATCH v16 " beilei.xing
2022-10-31 3:36 ` [PATCH v16 01/18] common/idpf: introduce common library beilei.xing
2022-10-31 3:36 ` [PATCH v16 02/18] net/idpf: add support for device initialization beilei.xing
2022-10-31 3:36 ` [PATCH v16 03/18] net/idpf: add Tx queue setup beilei.xing
2022-10-31 3:36 ` [PATCH v16 04/18] net/idpf: add Rx " beilei.xing
2022-10-31 3:36 ` [PATCH v16 05/18] net/idpf: add support for device start and stop beilei.xing
2022-10-31 3:36 ` [PATCH v16 06/18] net/idpf: add support for queue start beilei.xing
2022-10-31 3:36 ` [PATCH v16 07/18] net/idpf: add support for queue stop beilei.xing
2022-10-31 3:36 ` [PATCH v16 08/18] net/idpf: add queue release beilei.xing
2022-10-31 3:36 ` [PATCH v16 09/18] net/idpf: add support for MTU configuration beilei.xing
2022-10-31 3:36 ` [PATCH v16 10/18] net/idpf: add support for basic Rx datapath beilei.xing
2022-10-31 3:36 ` [PATCH v16 11/18] net/idpf: add support for basic Tx datapath beilei.xing
2022-10-31 3:36 ` [PATCH v16 12/18] net/idpf: support parsing packet type beilei.xing
2022-10-31 3:36 ` [PATCH v16 13/18] net/idpf: add support for write back based on ITR expire beilei.xing
2022-10-31 3:36 ` [PATCH v16 14/18] net/idpf: add support for RSS beilei.xing
2022-10-31 3:36 ` [PATCH v16 15/18] net/idpf: add support for Rx offloading beilei.xing
2022-10-31 3:36 ` [PATCH v16 16/18] net/idpf: add support for Tx offloading beilei.xing
2022-10-31 3:36 ` [PATCH v16 17/18] net/idpf: add AVX512 data path for single queue model beilei.xing
2022-10-31 3:36 ` [PATCH v16 18/18] net/idpf: add support for timestamp offload beilei.xing
2022-10-31 5:15 ` [PATCH v17 00/18] add support for idpf PMD in DPDK beilei.xing
2022-10-31 5:15 ` [PATCH v17 01/18] common/idpf: introduce common library beilei.xing
2022-10-31 5:15 ` [PATCH v17 02/18] net/idpf: add support for device initialization beilei.xing
2022-10-31 5:15 ` [PATCH v17 03/18] net/idpf: add Tx queue setup beilei.xing
2022-10-31 5:15 ` [PATCH v17 04/18] net/idpf: add Rx " beilei.xing
2022-10-31 5:15 ` [PATCH v17 05/18] net/idpf: add support for device start and stop beilei.xing
2022-10-31 5:15 ` [PATCH v17 06/18] net/idpf: add support for queue start beilei.xing
2022-10-31 5:15 ` [PATCH v17 07/18] net/idpf: add support for queue stop beilei.xing
2022-10-31 5:15 ` [PATCH v17 08/18] net/idpf: add queue release beilei.xing
2022-10-31 5:15 ` [PATCH v17 09/18] net/idpf: add support for MTU configuration beilei.xing
2022-10-31 5:15 ` [PATCH v17 10/18] net/idpf: add support for basic Rx datapath beilei.xing
2022-10-31 5:15 ` [PATCH v17 11/18] net/idpf: add support for basic Tx datapath beilei.xing
2022-10-31 5:15 ` [PATCH v17 12/18] net/idpf: support parsing packet type beilei.xing
2022-10-31 5:15 ` [PATCH v17 13/18] net/idpf: add support for write back based on ITR expire beilei.xing
2022-10-31 5:15 ` [PATCH v17 14/18] net/idpf: add support for RSS beilei.xing
2022-10-31 5:15 ` [PATCH v17 15/18] net/idpf: add support for Rx offloading beilei.xing
2022-10-31 5:15 ` [PATCH v17 16/18] net/idpf: add support for Tx offloading beilei.xing
2022-10-31 5:15 ` [PATCH v17 17/18] net/idpf: add AVX512 data path for single queue model beilei.xing
2022-10-31 5:15 ` [PATCH v17 18/18] net/idpf: add support for timestamp offload beilei.xing
2022-10-31 8:33 ` [PATCH v18 00/18] add support for idpf PMD in DPDK beilei.xing
2022-10-31 8:33 ` [PATCH v18 01/18] common/idpf: introduce common library beilei.xing
2022-10-31 8:33 ` [PATCH v18 02/18] net/idpf: add support for device initialization beilei.xing
2022-10-31 8:33 ` [PATCH v18 03/18] net/idpf: add Tx queue setup beilei.xing
2022-10-31 8:33 ` [PATCH v18 04/18] net/idpf: add Rx " beilei.xing
2022-10-31 8:33 ` [PATCH v18 05/18] net/idpf: add support for device start and stop beilei.xing
2022-10-31 8:33 ` [PATCH v18 06/18] net/idpf: add support for queue start beilei.xing
2022-10-31 8:33 ` [PATCH v18 07/18] net/idpf: add support for queue stop beilei.xing
2022-10-31 8:33 ` [PATCH v18 08/18] net/idpf: add queue release beilei.xing
2022-10-31 8:33 ` [PATCH v18 09/18] net/idpf: add support for MTU configuration beilei.xing
2022-10-31 8:33 ` [PATCH v18 10/18] net/idpf: add support for basic Rx datapath beilei.xing
2022-10-31 8:33 ` [PATCH v18 11/18] net/idpf: add support for basic Tx datapath beilei.xing
2022-10-31 8:33 ` [PATCH v18 12/18] net/idpf: support parsing packet type beilei.xing
2022-10-31 8:33 ` [PATCH v18 13/18] net/idpf: add support for write back based on ITR expire beilei.xing
2022-10-31 8:33 ` [PATCH v18 14/18] net/idpf: add support for RSS beilei.xing
2022-10-31 8:33 ` [PATCH v18 15/18] net/idpf: add support for Rx offloading beilei.xing
2022-10-31 8:33 ` [PATCH v18 16/18] net/idpf: add support for Tx offloading beilei.xing
2022-10-31 8:33 ` [PATCH v18 17/18] net/idpf: add AVX512 data path for single queue model beilei.xing
2022-10-31 8:33 ` [PATCH v18 18/18] net/idpf: add support for timestamp offload beilei.xing
2022-10-31 13:38 ` [PATCH v18 00/18] add support for idpf PMD in DPDK Thomas Monjalon
2022-10-27 5:44 ` [PATCH v13 02/18] net/idpf: add support for device initialization Junfeng Guo
2022-10-27 5:44 ` [PATCH v13 03/18] net/idpf: add Tx queue setup Junfeng Guo
2022-10-27 5:44 ` [PATCH v13 04/18] net/idpf: add Rx " Junfeng Guo
2022-10-27 5:44 ` [PATCH v13 05/18] net/idpf: add support for device start and stop Junfeng Guo
2022-10-27 5:44 ` [PATCH v13 06/18] net/idpf: add support for queue start Junfeng Guo
2022-10-27 5:44 ` [PATCH v13 07/18] net/idpf: add support for queue stop Junfeng Guo
2022-10-27 5:44 ` [PATCH v13 08/18] net/idpf: add queue release Junfeng Guo
2022-10-27 5:44 ` [PATCH v13 09/18] net/idpf: add support for MTU configuration Junfeng Guo
2022-10-27 5:44 ` [PATCH v13 10/18] net/idpf: add support for basic Rx datapath Junfeng Guo
2022-10-27 5:44 ` [PATCH v13 11/18] net/idpf: add support for basic Tx datapath Junfeng Guo
2022-10-27 5:44 ` [PATCH v13 12/18] net/idpf: support parsing packet type Junfeng Guo
2022-10-27 5:45 ` [PATCH v13 13/18] net/idpf: add support for write back based on ITR expire Junfeng Guo
2022-10-27 5:45 ` [PATCH v13 14/18] net/idpf: add support for RSS Junfeng Guo
2022-10-27 5:45 ` [PATCH v13 15/18] net/idpf: add support for Rx offloading Junfeng Guo
2022-10-27 5:45 ` [PATCH v13 16/18] net/idpf: add support for Tx offloading Junfeng Guo
2022-10-27 5:45 ` [PATCH v13 17/18] net/idpf: add AVX512 data path for single queue model Junfeng Guo
2022-10-27 5:45 ` [PATCH v13 18/18] net/idpf: add support for timestamp offload Junfeng Guo
2022-10-26 10:10 ` [PATCH v12 02/18] net/idpf: add support for device initialization Junfeng Guo
2022-10-26 10:10 ` [PATCH v12 03/18] net/idpf: add Tx queue setup Junfeng Guo
2022-10-26 10:10 ` [PATCH v12 04/18] net/idpf: add Rx " Junfeng Guo
2022-10-26 10:10 ` [PATCH v12 05/18] net/idpf: add support for device start and stop Junfeng Guo
2022-10-26 10:10 ` [PATCH v12 06/18] net/idpf: add support for queue start Junfeng Guo
2022-10-26 10:10 ` [PATCH v12 07/18] net/idpf: add support for queue stop Junfeng Guo
2022-10-26 10:10 ` [PATCH v12 08/18] net/idpf: add queue release Junfeng Guo
2022-10-26 10:10 ` [PATCH v12 09/18] net/idpf: add support for MTU configuration Junfeng Guo
2022-10-26 10:10 ` [PATCH v12 10/18] net/idpf: add support for basic Rx datapath Junfeng Guo
2022-10-26 10:10 ` [PATCH v12 11/18] net/idpf: add support for basic Tx datapath Junfeng Guo
2022-10-26 10:10 ` [PATCH v12 12/18] net/idpf: support packet type get Junfeng Guo
2022-10-26 10:10 ` [PATCH v12 13/18] net/idpf: add support for write back based on ITR expire Junfeng Guo
2022-10-26 10:10 ` [PATCH v12 14/18] net/idpf: add support for RSS Junfeng Guo
2022-10-26 10:10 ` [PATCH v12 15/18] net/idpf: add support for Rx offloading Junfeng Guo
2022-10-26 10:10 ` [PATCH v12 16/18] net/idpf: add support for Tx offloading Junfeng Guo
2022-10-26 10:10 ` [PATCH v12 17/18] net/idpf: add AVX512 data path for single queue model Junfeng Guo
2022-10-26 10:10 ` [PATCH v12 18/18] net/idpf: add support for timestamp offload Junfeng Guo
2022-10-24 13:12 ` [PATCH v11 02/18] net/idpf: add support for device initialization Junfeng Guo
2022-10-25 8:57 ` Andrew Rybchenko
2022-10-26 8:28 ` Xing, Beilei
2022-10-28 15:14 ` Andrew Rybchenko
2022-10-28 17:19 ` Xing, Beilei
2022-10-24 13:12 ` [PATCH v11 03/18] net/idpf: add Tx queue setup Junfeng Guo
2022-10-25 9:40 ` Andrew Rybchenko [this message]
2022-10-26 8:34 ` Xing, Beilei
2022-10-24 13:12 ` [PATCH v11 04/18] net/idpf: add Rx " Junfeng Guo
2022-10-24 13:12 ` [PATCH v11 05/18] net/idpf: add support for device start and stop Junfeng Guo
2022-10-25 9:49 ` Andrew Rybchenko
2022-10-26 8:38 ` Xing, Beilei
2022-10-24 13:12 ` [PATCH v11 06/18] net/idpf: add support for queue start Junfeng Guo
2022-10-24 13:12 ` [PATCH v11 07/18] net/idpf: add support for queue stop Junfeng Guo
2022-10-24 13:12 ` [PATCH v11 08/18] net/idpf: add queue release Junfeng Guo
2022-10-24 13:12 ` [PATCH v11 09/18] net/idpf: add support for packet type get Junfeng Guo
2022-10-25 9:57 ` Andrew Rybchenko
2022-10-24 13:12 ` [PATCH v11 10/18] net/idpf: add support for MTU configuration Junfeng Guo
2022-10-24 13:12 ` [PATCH v11 11/18] net/idpf: add support for basic Rx datapath Junfeng Guo
2022-10-24 13:12 ` [PATCH v11 12/18] net/idpf: add support for basic Tx datapath Junfeng Guo
2022-10-25 10:12 ` Andrew Rybchenko
2022-10-24 13:12 ` [PATCH v11 13/18] net/idpf: add support for write back based on ITR expire Junfeng Guo
2022-10-24 13:12 ` [PATCH v11 14/18] net/idpf: add support for RSS Junfeng Guo
2022-10-24 13:12 ` [PATCH v11 15/18] net/idpf: add support for Rx offloading Junfeng Guo
2022-10-25 10:03 ` Andrew Rybchenko
2022-10-28 1:48 ` Xing, Beilei
2022-10-24 13:12 ` [PATCH v11 16/18] net/idpf: add support for Tx offloading Junfeng Guo
2022-10-25 10:14 ` Andrew Rybchenko
2022-10-24 13:12 ` [PATCH v11 17/18] net/idpf: add AVX512 data path for single queue model Junfeng Guo
2022-10-24 13:12 ` [PATCH v11 18/18] net/idpf: add support for timestamp offload Junfeng Guo
2022-10-24 13:01 ` [PATCH v10 02/14] net/idpf: add support for queue start Junfeng Guo
2022-10-24 13:01 ` [PATCH v10 03/14] net/idpf: add support for queue stop Junfeng Guo
2022-10-24 13:01 ` [PATCH v10 04/14] net/idpf: add queue release Junfeng Guo
2022-10-24 13:01 ` [PATCH v10 05/14] net/idpf: add support for packet type get Junfeng Guo
2022-10-24 13:01 ` [PATCH v10 06/14] net/idpf: add support for MTU configuration Junfeng Guo
2022-10-24 13:01 ` [PATCH v10 07/14] net/idpf: add support for basic Rx datapath Junfeng Guo
2022-10-24 13:01 ` [PATCH v10 08/14] net/idpf: add support for basic Tx datapath Junfeng Guo
2022-10-24 13:01 ` [PATCH v10 09/14] net/idpf: add support for write back based on ITR expire Junfeng Guo
2022-10-24 13:01 ` [PATCH v10 10/14] net/idpf: add support for RSS Junfeng Guo
2022-10-24 13:01 ` [PATCH v10 11/14] net/idpf: add support for Rx offloading Junfeng Guo
2022-10-24 13:01 ` [PATCH v10 12/14] net/idpf: add support for Tx offloading Junfeng Guo
2022-10-24 13:01 ` [PATCH v10 13/14] net/idpf: add AVX512 data path for single queue model Junfeng Guo
2022-10-24 13:01 ` [PATCH v10 14/14] net/idpf: add support for timestamp offload Junfeng Guo
2022-10-21 5:18 ` [PATCH v9 02/14] net/idpf: add support for device initialization Junfeng Guo
2022-10-21 7:39 ` Andrew Rybchenko
2022-10-21 7:48 ` Andrew Rybchenko
2022-10-21 12:41 ` Zhang, Qi Z
2022-10-25 7:52 ` Andrew Rybchenko
2022-10-21 5:18 ` [PATCH v9 03/14] net/idpf: add queue setup and release in single queue model Junfeng Guo
2022-10-21 7:44 ` Andrew Rybchenko
2022-10-21 5:18 ` [PATCH v9 04/14] net/idpf: add queue setup and release in split " Junfeng Guo
2022-10-21 5:18 ` [PATCH v9 05/14] net/idpf: add support for queue start and stop Junfeng Guo
2022-10-21 7:53 ` Andrew Rybchenko
2022-10-21 5:18 ` [PATCH v9 06/14] net/idpf: add support for device information get Junfeng Guo
2022-10-21 7:56 ` Andrew Rybchenko
2022-10-21 5:18 ` [PATCH v9 07/14] net/idpf: add support for packet type get Junfeng Guo
2022-10-21 8:00 ` Andrew Rybchenko
2022-10-21 5:18 ` [PATCH v9 08/14] net/idpf: add support for basic Rx/Tx datapath Junfeng Guo
2022-10-21 5:18 ` [PATCH v9 09/14] net/idpf: add support for Rx/Tx offloading Junfeng Guo
2022-10-21 8:29 ` Andrew Rybchenko
2022-10-24 13:26 ` Xing, Beilei
2022-10-21 5:18 ` [PATCH v9 10/14] net/idpf: add support for RSS Junfeng Guo
2022-10-21 8:38 ` Andrew Rybchenko
2022-10-21 5:18 ` [PATCH v9 11/14] net/idpf: add support for MTU configuration Junfeng Guo
2022-10-21 5:18 ` [PATCH v9 12/14] net/idpf: add support for write back based on ITR expire Junfeng Guo
2022-10-21 5:18 ` [PATCH v9 13/14] net/idpf: add AVX512 data path for single queue model Junfeng Guo
2022-10-21 5:18 ` [PATCH v9 14/14] net/idpf: add support for timestamp offload Junfeng Guo
2022-10-20 6:29 ` [PATCH v8 02/14] net/idpf: add support for device initialization Junfeng Guo
2022-10-20 6:29 ` [PATCH v8 03/14] net/idpf: add queue setup and release in single queue model Junfeng Guo
2022-10-20 6:29 ` [PATCH v8 04/14] net/idpf: add queue setup and release in split " Junfeng Guo
2022-10-20 6:29 ` [PATCH v8 05/14] net/idpf: add support for queue start and stop Junfeng Guo
2022-10-20 6:29 ` [PATCH v8 06/14] net/idpf: add support for device information get Junfeng Guo
2022-10-20 6:29 ` [PATCH v8 07/14] net/idpf: add support for packet type get Junfeng Guo
2022-10-20 6:29 ` [PATCH v8 08/14] net/idpf: add support for basic Rx/Tx datapath Junfeng Guo
2022-10-20 6:29 ` [PATCH v8 09/14] net/idpf: add support for Rx/Tx offloading Junfeng Guo
2022-10-20 6:29 ` [PATCH v8 10/14] net/idpf: add support for RSS Junfeng Guo
2022-10-20 6:29 ` [PATCH v8 11/14] net/idpf: add support for MTU configuration Junfeng Guo
2022-10-20 6:29 ` [PATCH v8 12/14] net/idpf: add support for write back based on ITR expire Junfeng Guo
2022-10-20 6:29 ` [PATCH v8 13/14] net/idpf: add AVX512 data path for single queue model Junfeng Guo
2022-10-20 6:29 ` [PATCH v8 14/14] net/idpf: add support for timestamp offload Junfeng Guo
2022-10-19 14:54 ` [PATCH v6 02/14] net/idpf: add support for device initialization Junfeng Guo
2022-10-19 14:54 ` [PATCH v6 03/14] net/idpf: add queue setup and release in single queue model Junfeng Guo
2022-10-19 14:54 ` [PATCH v6 04/14] net/idpf: add queue setup and release in split " Junfeng Guo
2022-10-19 14:54 ` [PATCH v6 05/14] net/idpf: add support for queue start and stop Junfeng Guo
2022-10-19 14:54 ` [PATCH v6 06/14] net/idpf: add support for device information get Junfeng Guo
2022-10-19 14:54 ` [PATCH v6 07/14] net/idpf: add support for packet type get Junfeng Guo
2022-10-19 14:54 ` [PATCH v6 08/14] net/idpf: add support for basic Rx/Tx datapath Junfeng Guo
2022-10-19 14:54 ` [PATCH v6 09/14] net/idpf: add support for Rx/Tx offloading Junfeng Guo
2022-10-19 14:54 ` [PATCH v6 10/14] net/idpf: add support for RSS Junfeng Guo
2022-10-19 14:54 ` [PATCH v6 11/14] net/idpf: add support for MTU configuration Junfeng Guo
2022-10-19 14:54 ` [PATCH v6 12/14] net/idpf: add support for write back based on ITR expire Junfeng Guo
2022-10-19 14:54 ` [PATCH v6 13/14] net/idpf: add AVX512 data path for single queue model Junfeng Guo
2022-10-19 14:54 ` [PATCH v6 14/14] net/idpf: add support for timestamp offload Junfeng Guo
2022-10-19 11:03 ` [PATCH v5 02/14] net/idpf: add support for device initialization Junfeng Guo
2022-10-19 11:03 ` [PATCH v5 03/14] net/idpf: add queue setup and release in single queue model Junfeng Guo
2022-10-19 11:03 ` [PATCH v5 04/14] net/idpf: add queue setup and release in split " Junfeng Guo
2022-10-19 11:03 ` [PATCH v5 05/14] net/idpf: add support for queue start and stop Junfeng Guo
2022-10-19 11:03 ` [PATCH v5 06/14] net/idpf: add support for device information get Junfeng Guo
2022-10-19 11:03 ` [PATCH v5 07/14] net/idpf: add support for packet type get Junfeng Guo
2022-10-19 11:03 ` [PATCH v5 08/14] net/idpf: add support for basic Rx/Tx datapath Junfeng Guo
2022-10-19 11:03 ` [PATCH v5 09/14] net/idpf: add support for Rx/Tx offloading Junfeng Guo
2022-10-19 11:03 ` [PATCH v5 10/14] net/idpf: add support for RSS Junfeng Guo
2022-10-19 11:03 ` [PATCH v5 11/14] net/idpf: add support for MTU configuration Junfeng Guo
2022-10-19 11:03 ` [PATCH v5 12/14] net/idpf: add support for write back based on ITR expire Junfeng Guo
2022-10-19 11:03 ` [PATCH v5 13/14] net/idpf: add AVX512 data path for single queue model Junfeng Guo
2022-10-19 11:03 ` [PATCH v5 14/14] net/idpf: add support for timestamp offload Junfeng Guo
2022-10-19 10:37 ` [PATCH v4 02/14] net/idpf: add support for device initialization Junfeng Guo
2022-10-19 10:37 ` [PATCH v4 03/14] net/idpf: add queue setup and release in single queue model Junfeng Guo
2022-10-19 10:37 ` [PATCH v4 04/14] net/idpf: add queue setup and release in split " Junfeng Guo
2022-10-19 10:37 ` [PATCH v4 05/14] net/idpf: add support for queue start and stop Junfeng Guo
2022-10-19 10:37 ` [PATCH v4 06/14] net/idpf: add support for device information get Junfeng Guo
2022-10-19 10:37 ` [PATCH v4 07/14] net/idpf: add support for packet type get Junfeng Guo
2022-10-19 10:37 ` [PATCH v4 08/14] net/idpf: add support for basic Rx/Tx datapath Junfeng Guo
2022-10-19 10:37 ` [PATCH v4 09/14] net/idpf: add support for Rx/Tx offloading Junfeng Guo
2022-10-19 10:37 ` [PATCH v4 10/14] net/idpf: add support for RSS Junfeng Guo
2022-10-19 10:37 ` [PATCH v4 11/14] net/idpf: add support for MTU configuration Junfeng Guo
2022-10-19 10:37 ` [PATCH v4 12/14] net/idpf: add support for write back based on ITR expire Junfeng Guo
2022-10-19 10:37 ` [PATCH v4 13/14] net/idpf: add AVX512 data path for single queue model Junfeng Guo
2022-10-19 10:37 ` [PATCH v4 14/14] net/idpf: add support for timestamp offload Junfeng Guo
2022-10-18 11:12 ` [PATCH v3 02/15] net/idpf: add support for device initialization Junfeng Guo
2022-10-18 11:12 ` [PATCH v3 03/15] net/idpf: add queue setup and release in single queue model Junfeng Guo
2022-10-18 11:12 ` [PATCH v3 04/15] net/idpf: add queue setup and release in split " Junfeng Guo
2022-10-18 11:12 ` [PATCH v3 05/15] net/idpf: add support for queue start and stop Junfeng Guo
2022-10-18 11:12 ` [PATCH v3 06/15] net/idpf: add support for device information get Junfeng Guo
2022-10-18 11:12 ` [PATCH v3 07/15] net/idpf: add support for packet type get Junfeng Guo
2022-10-18 11:12 ` [PATCH v3 08/15] net/idpf: add support for link status update Junfeng Guo
2022-10-18 11:12 ` [PATCH v3 09/15] net/idpf: add support for basic Rx/Tx datapath Junfeng Guo
2022-10-18 11:12 ` [PATCH v3 10/15] net/idpf: add support for Rx/Tx offloading Junfeng Guo
2022-10-18 11:12 ` [PATCH v3 11/15] net/idpf: add support for RSS Junfeng Guo
2022-10-18 11:12 ` [PATCH v3 12/15] net/idpf: add support for MTU configuration Junfeng Guo
2022-10-18 11:12 ` [PATCH v3 13/15] net/idpf: add support for write back based on ITR expire Junfeng Guo
2022-10-18 11:12 ` [PATCH v3 14/15] net/idpf: add AVX512 data path for single queue model Junfeng Guo
2022-10-18 11:12 ` [PATCH v3 15/15] net/idpf: add support for timestamp offload Junfeng Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=a39dca5d-5e4f-8071-5532-450ce1c398c1@oktetlabs.ru \
--to=andrew.rybchenko@oktetlabs.ru \
--cc=beilei.xing@intel.com \
--cc=dev@dpdk.org \
--cc=jingjing.wu@intel.com \
--cc=junfeng.guo@intel.com \
--cc=qi.z.zhang@intel.com \
--cc=xiaoyun.li@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).