From: "Doherty, Declan" <declan.doherty@intel.com>
To: Thomas Monjalon <thomas@monjalon.net>
Cc: Remy Horton <remy.horton@intel.com>,
Mohammad Abdul Awal <mohammad.abdul.awal@intel.com>,
dev@dpdk.org, John McNamara <john.mcnamara@intel.com>,
Wenzhuo Lu <wenzhuo.lu@intel.com>,
Jingjing Wu <jingjing.wu@intel.com>,
Alejandro Lucero <alejandro.lucero@netronome.com>,
vincent.jardin@6wind.com
Subject: Re: [dpdk-dev] [PATCH v4 0/5] lib: add Port Representors
Date: Mon, 15 Jan 2018 12:12:29 +0000 [thread overview]
Message-ID: <a48277eb-04f8-84cb-0999-0ec2af9ab749@intel.com> (raw)
In-Reply-To: <2447572.KKM6cvjoYG@xps>
On 10/01/2018 7:26 PM, Thomas Monjalon wrote:
> 10/01/2018 14:46, Doherty, Declan:
>> On 09/01/2018 11:22 PM, Thomas Monjalon wrote:
>>> Hi,
>>>
>>> 08/01/2018 15:37, Remy Horton:
>>>> Port Representors provide a logical presentation in DPDK of VF (virtual
>>>> function) ports for the purposes of control and monitoring. Each port
>>>> representor device represents a single VF and is associated with it's
>>>> parent physical function (PF) PMD which provides the back-end hooks for
>>>> the representor device ops and defines the control domain to which that
>>>> port belongs. This allows to use existing DPDK APIs to monitor and control
>>>> the port without the need to create and maintain VF specific APIs.
>>>
>>> Extending control plane ability of DPDK has been discussed
>>> multiple times.
>>
>> It has, and I have yet to see a really strong reason as to why we would
>> not support control plane functions within DPDK, many of which are
>> already support today implicitly anyway through our ethdev APIs.
>>
>>> The current agreed policy is:
>>> "
>>> The primary goal of DPDK is to provide a userspace dataplane.
>>> Managing VFs from a PF driver is a control plane feature and developers
>>> should generally rely on the Linux Kernel for that.
>>> "
>>> http://dpdk.org/doc/guides/contributing/design.html#pf-and-vf-considerations
>>>
>>
>> My understanding is that this particular entry was based around the
>> discussion on the divergence of functionality between the Linux kernel
>> PF driver and the DPDK PF driver. I also don't really think the above
>> statement is valid as a blanket statement for the project as it makes
>> the assumption that DPDK is only deployed on Linux hosts, what about
>> FreeBSD? or in the future Windows?
>
> Yes, we must agree on removing this scope limitation while working
> on a generic VF representor.
>
>> A number of presentations at both Userspace in Dublin and the Summit
>> in San Jose discussed the support of control plane functionality by
>> DPDK and there wasn't any strong arguments or opposition against using
>> DPDK for control plane functions that I saw.
>>
>> In any case this patchset is not introducing any new control plane APIs
>> that don't already exist within DPDK today, it only enables the creation
>> of a new type of virtual PMDs which are linked to the same base
>> infrastructure and which can be used to represent VFs in a control plane
>> application as we have implemented in this patch set.
>>
>>> If we relax this policy, I think the representor solution should be
>>> a real port, not only "for the purposes of control and monitoring".
>>> It has been asked several times as replies to this series,
>>> but it is kindly ignored, saying it will be thought later.
>>>
>>
>> I think we have stated in multiple discussions, especially during the
>> userspace presentation back in September that this solution supports
>> data path on the representors PMDs, and we have used the
>> infrastructure proposed here to do exactly what you are asking. As the
>> representor infrastructure doesn't preclude the support of a data
>> path, we have used it as it is presented here to implement a data path
>> for exception path packets for a prototype vswitch offload implementation.
>>
>>
>>> I don't see a general agreement on this series so far.
>>>
>>
>> I think the main issue of contention is that there is a
>> misunderstanding that this implementation only supports control plane
>> management and monitoring, but that is not the case and it can be used
>> for full data path representors, with limited or no control plane
>> functionality if required, at the end of the day the only limitations
>> are based on what is implemented by the backend base driver were the
>> broker is running for the representor ports.
>
> The misunderstanding may originates from what you describe (even in v5):
> "ports for the purposes of control and monitoring"
>
noted, but that is the scope of what we demostrate in the patchset, but
we'll update the introduction to reflect the fact that they can be used
to also support data path functions, such as exception path traffic for
hw switch.
> I think everybody agree to have VF representors in DPDK.
> But there are few things which are not generic enough,
> and not easy to use.
> I hoped the discussion started at Dublin would continue
> on the mailing list but I realize the joint effort with other vendors
> did not happen.
> I will elaborate quickly below and more detailed in later review.
>
> 1/ In order to keep track of the relations between PF, VF and
> representor - which are all ethdev - you create a struct outside
> of ethdev. I think it should be managed inside ethdev API.
Initially we had implemented the representor functionality within the
context of the ethdev library but ran into a number of scenarios where
this didn't work well as it makes the assumption that the base device
that the representors are attached to is always an ethdev, we ran into
cases were the PF isn't necessarily an ethdev, for example in some
smartNICs the PF would be better represented by a switchdev, or it is
possible that the device hosting the representor broker could just
provide a conduit to a kernel driver.
> As suggested by others, we could also think whether a switchdev API
> is interesting or not.
>
Indeed if a switchdev is something that is required by the community it
would make sense that the representor infrastructure was initialized
within the switchdev and not an ethdev. The advantage of keeping the
representor infrastructure independent is that it gives the flexibility
for representors to be supported independently of device type they are
attached to.
> 2/ You create a new library for ethdev device management.
> It is the responsibility of the bus to scan and probe devices.
> In Intel case, the representor has no real bus so it must rely on
> the vdev bus. Note that the new custom scan hook may help.
This isn't the case in latest versions of the patchset, the bus the
representors are dependent on is that of the base device, so for the
i40e it's the PF PCI device.
> In Mellanox case, the representor already exists in Linux, and is based
> on PCI bus.
> Then, as any other port, it must be managed with whitelist or blacklist.
>
I think the suggestion by Yuanhan of using the device whitelist command
option makes sense as a option from the commandline, but it would
require the newly propose implementation which allows specification of
both the bus and device as not all devices are PCI, which have multiple
host ports using SR-IOV, but there are cases when an dynamic
creation/destruction of ports may also need to be supported, which is
what the representor APIs support.
> 2-bis/ Minor comments about this lib:
> - it is not convenient to ask user or app to enable it
I have no problem removing this EAL option.
> - it is not using dynamic logging
We will address this in the next revision
>
> 3/ You are using PCI address + index to identify the representor.
> It is a no-go. We have made effort to abstract buses.
> As an idea, the identification of a representor could use the new
> proposed flexible device syntax.
>
We are currently using net_representor_%bus%_%device_id%_%vport_id% to
identify each representor device but I have no issue changing to either
the current convention which would be net_representor_%unique_id% or if
I understand the proposal in the RFC "ether: standardize getting the
port by name" we would be using something like,
we should be looking at something along the lines of
net_%bus%_%device_id%_%port_id% which is pretty close to what we are
using now.
In terms of that RFC I'm not clear on if the proposal is just to affect
the API for getting a port by name, or actually the name name assigned
to the device itself.
> 4/ Such new API must be experimental.
>
We will address this in the next revision
> I propose to better think the representor API inside ethdev
> with a good multi-vendor collaboration,
> and submit a deprecation notice for 18.05 integration.
>
I would really like to see this included as experimental in 18.02
release, if it is agreed by the community that we need to re-integate
the representor concept into librte_ethdev during for 18.05 we will
support that work.
next prev parent reply other threads:[~2018-01-15 12:12 UTC|newest]
Thread overview: 75+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-11-17 14:42 [dpdk-dev] [PATCH v2 1/6] ethdev: added switch_domain and representor port flag Mohammad Abdul Awal
2017-11-17 14:42 ` [dpdk-dev] [PATCH v2 2/6] lib/representor: port representor library to manage broker infrastructure and representor PMDs Mohammad Abdul Awal
2017-11-17 23:03 ` Ferruh Yigit
2017-12-08 14:57 ` Mohammad Abdul Awal
2017-11-17 14:42 ` [dpdk-dev] [PATCH v2 3/6] eal: added --enable-representor command line argument in EAL to load representor broker infrastructure Mohammad Abdul Awal
2017-11-17 14:42 ` [dpdk-dev] [PATCH v2 4/6] net/representor: Implement port representor PMD Mohammad Abdul Awal
2017-11-20 7:46 ` Ferruh Yigit
2017-12-08 15:02 ` Remy Horton
2017-12-08 16:56 ` Mohammad Abdul Awal
2017-12-11 10:08 ` Remy Horton
2017-12-11 15:11 ` Mohammad Abdul Awal
2017-12-11 15:29 ` Remy Horton
2017-11-17 14:42 ` [dpdk-dev] [PATCH v2 5/6] net/i40e: Enable port representor PMD and broker for fortville PMD driver Mohammad Abdul Awal
2017-11-20 7:48 ` Ferruh Yigit
2017-11-17 14:42 ` [dpdk-dev] [PATCH v2 6/6] net/ixgbe: Enable port representor PMD and broker for ixgbe " Mohammad Abdul Awal
2017-11-20 19:57 ` [dpdk-dev] [PATCH v2 1/6] ethdev: added switch_domain and representor port flag Ferruh Yigit
2017-12-08 15:33 ` Mohammad Abdul Awal
2017-12-11 13:45 ` Alex Rosenbaum
2017-12-11 18:00 ` Mohammad Abdul Awal
2017-12-22 14:41 ` [dpdk-dev] [DPDK 0/5] lib: add Port Representors Remy Horton
2017-12-22 14:41 ` [dpdk-dev] [DPDK 1/5] lib: add Port Representor library Remy Horton
2017-12-22 14:41 ` [dpdk-dev] [DPDK 2/5] eal: add Port Representor command-line option Remy Horton
2017-12-22 14:41 ` [dpdk-dev] [DPDK 3/5] drivers/net/i40e: add Port Representor functionality Remy Horton
2017-12-22 14:41 ` [dpdk-dev] [DPDK 4/5] drivers/net/ixgbe: " Remy Horton
2017-12-22 14:41 ` [dpdk-dev] [DPDK 5/5] app/test-pmd: add Port Representor commands Remy Horton
2017-12-22 15:09 ` [dpdk-dev] [DPDK 0/5] lib: add Port Representors Remy Horton
2017-12-22 16:37 ` Neil Horman
2018-01-03 12:14 ` Mohammad Abdul Awal
2017-12-22 14:52 ` [dpdk-dev] [PATCH v3 " Remy Horton
2017-12-22 14:52 ` [dpdk-dev] [PATCH v3 1/5] lib: add Port Representor library Remy Horton
2017-12-22 14:52 ` [dpdk-dev] [PATCH v3 2/5] eal: add Port Representor command-line option Remy Horton
2017-12-22 14:52 ` [dpdk-dev] [PATCH v3 3/5] drivers/net/i40e: add Port Representor functionality Remy Horton
2017-12-22 14:52 ` [dpdk-dev] [PATCH v3 4/5] drivers/net/ixgbe: " Remy Horton
2017-12-22 14:52 ` [dpdk-dev] [PATCH v3 5/5] app/test-pmd: add Port Representor commands Remy Horton
2017-12-26 13:54 ` [dpdk-dev] [PATCH v3 0/5] lib: add Port Representors Neil Horman
2018-01-03 12:12 ` Mohammad Abdul Awal
2018-01-08 14:37 ` [dpdk-dev] [PATCH v4 " Remy Horton
2018-01-08 14:37 ` [dpdk-dev] [PATCH v4 1/5] lib: add Port Representor library Remy Horton
2018-01-09 22:06 ` Ferruh Yigit
2018-01-10 11:40 ` Remy Horton
2018-01-08 14:37 ` [dpdk-dev] [PATCH v4 2/5] eal: add Port Representor command-line option Remy Horton
2018-01-09 22:07 ` Ferruh Yigit
2018-01-08 14:37 ` [dpdk-dev] [PATCH v4 3/5] drivers/net/i40e: add Port Representor functionality Remy Horton
2018-01-09 22:09 ` Ferruh Yigit
2018-01-10 7:56 ` Xing, Beilei
2018-01-10 10:11 ` Mohammad Abdul Awal
2018-01-10 12:37 ` Xing, Beilei
2018-01-10 14:04 ` Mohammad Abdul Awal
2018-01-08 14:37 ` [dpdk-dev] [PATCH v4 4/5] drivers/net/ixgbe: " Remy Horton
2018-01-08 14:37 ` [dpdk-dev] [PATCH v4 5/5] app/test-pmd: add Port Representor commands Remy Horton
2018-01-09 22:10 ` Ferruh Yigit
2018-01-10 7:22 ` Remy Horton
2018-01-09 22:01 ` [dpdk-dev] [PATCH v4 0/5] lib: add Port Representors Ferruh Yigit
2018-01-10 14:17 ` Mohammad Abdul Awal
2018-01-09 23:22 ` Thomas Monjalon
2018-01-10 13:46 ` Doherty, Declan
2018-01-10 19:26 ` Thomas Monjalon
2018-01-15 12:12 ` Doherty, Declan [this message]
2018-01-15 16:09 ` Thomas Monjalon
2018-01-10 15:54 ` [dpdk-dev] [PATCH v5 " Remy Horton
2018-01-10 15:54 ` [dpdk-dev] [PATCH v5 1/5] lib: add Port Representor library Remy Horton
2018-01-30 9:23 ` Andrew Rybchenko
2018-01-10 15:54 ` [dpdk-dev] [PATCH v5 2/5] eal: add Port Representor command-line option Remy Horton
2018-01-10 15:54 ` [dpdk-dev] [PATCH v5 3/5] drivers/net/i40e: add Port Representor functionality Remy Horton
2018-01-10 15:54 ` [dpdk-dev] [PATCH v5 4/5] drivers/net/ixgbe: " Remy Horton
2018-01-10 15:54 ` [dpdk-dev] [PATCH v5 5/5] app/test-pmd: add Port Representor commands Remy Horton
2018-01-10 17:49 ` [dpdk-dev] [PATCH v5 0/5] lib: add Port Representors Remy Horton
2018-01-10 17:49 ` [dpdk-dev] [PATCH v5 1/5] lib: add Port Representor library Remy Horton
2018-01-10 17:49 ` [dpdk-dev] [PATCH v5 2/5] eal: add Port Representor command-line option Remy Horton
2018-01-10 17:49 ` [dpdk-dev] [PATCH v5 3/5] drivers/net/i40e: add Port Representor functionality Remy Horton
2018-01-10 17:49 ` [dpdk-dev] [PATCH v5 4/5] drivers/net/ixgbe: " Remy Horton
2018-01-10 17:49 ` [dpdk-dev] [PATCH v5 5/5] app/test-pmd: add Port Representor commands Remy Horton
2018-01-11 3:18 ` [dpdk-dev] [PATCH v4 0/5] lib: add Port Representors Yuanhan Liu
2018-01-11 8:37 ` Alex Rosenbaum
2018-01-11 9:38 ` Remy Horton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=a48277eb-04f8-84cb-0999-0ec2af9ab749@intel.com \
--to=declan.doherty@intel.com \
--cc=alejandro.lucero@netronome.com \
--cc=dev@dpdk.org \
--cc=jingjing.wu@intel.com \
--cc=john.mcnamara@intel.com \
--cc=mohammad.abdul.awal@intel.com \
--cc=remy.horton@intel.com \
--cc=thomas@monjalon.net \
--cc=vincent.jardin@6wind.com \
--cc=wenzhuo.lu@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).