From: oulijun <oulijun@huawei.com>
To: <dev@dpdk.org>
Subject: Re: [dpdk-dev] [PATCH v3 01/22] ethdev: fix MTU size exceeds max rx packet length
Date: Sat, 23 Jan 2021 17:05:23 +0800 [thread overview]
Message-ID: <a56ea062-b272-2433-3b7e-7f93eb0987ae@huawei.com> (raw)
In-Reply-To: <c2f61061-14b2-c621-af83-31f956a654ca@huawei.com>
在 2021/1/19 16:46, oulijun 写道:
>
>
> 在 2021/1/18 18:42, Ferruh Yigit 写道:
>> On 1/15/2021 10:44 AM, oulijun wrote:
>>> Hi Steve
>>> This is a very good job! But I have some question and suggestions.
>>> Please check it.
>>>
>>> 在 2021/1/14 17:45, Steve Yang 写道:
>>>> Ethdev is using default Ethernet overhead to decide if provided
>>>> 'max_rx_pkt_len' value is bigger than max (non jumbo) MTU value,
>>>> and limits it to MAX if it is.
>>>>
>>>> Since the application/driver used Ethernet overhead is different than
>>>> the ethdev one, check result is wrong.
>>>>
>>>> If the driver is using Ethernet overhead bigger than the default one,
>>>> the provided 'max_rx_pkt_len' is trimmed down, and in the driver when
>>>> correct Ethernet overhead is used to convert back, the resulting MTU is
>>>> less than the intended one, causing some packets to be dropped.
>>>>
>>>> Like,
>>>> app -> max_rx_pkt_len = 1500/*mtu*/ + 22/*overhead*/ = 1522
>>>> ethdev -> 1522 > 1518/*MAX*/; max_rx_pkt_len = 1518
>>>> driver -> MTU = 1518 - 22 = 1496
>>>> Packets with size 1497-1500 are dropped although intention is to be
>>>> able
>>>> to send/receive them.
>>>>
>>>> The fix is to make ethdev use the correct Ethernet overhead for port,
>>>> instead of default one.
>>>>
>>>> Fixes: 59d0ecdbf0e1 ("ethdev: MTU accessors")
>>>>
>>>> Signed-off-by: Steve Yang <stevex.yang@intel.com>
>>>> ---
>>>> lib/librte_ethdev/rte_ethdev.c | 27 ++++++++++++++++++++++++---
>>>> 1 file changed, 24 insertions(+), 3 deletions(-)
>>>>
>>>> diff --git a/lib/librte_ethdev/rte_ethdev.c
>>>> b/lib/librte_ethdev/rte_ethdev.c
>>>> index 17ddacc78d..19ca4c4512 100644
>>>> --- a/lib/librte_ethdev/rte_ethdev.c
>>>> +++ b/lib/librte_ethdev/rte_ethdev.c
>>>> @@ -1292,8 +1292,10 @@ rte_eth_dev_configure(uint16_t port_id,
>>>> uint16_t nb_rx_q, uint16_t nb_tx_q,
>>>> struct rte_eth_dev *dev;
>>>> struct rte_eth_dev_info dev_info;
>>>> struct rte_eth_conf orig_conf;
>>>> + uint16_t overhead_len;
>>>> int diag;
>>>> int ret;
>>>> + uint16_t old_mtu;
>>>> RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
>>>> @@ -1319,10 +1321,20 @@ rte_eth_dev_configure(uint16_t port_id,
>>>> uint16_t nb_rx_q, uint16_t nb_tx_q,
>>>> memcpy(&dev->data->dev_conf, dev_conf,
>>>> sizeof(dev->data->dev_conf));
>>>> + /* Backup mtu for rollback */
>>>> + old_mtu = dev->data->mtu;
>>>> +
>>>> ret = rte_eth_dev_info_get(port_id, &dev_info);
>>>> if (ret != 0)
>>>> goto rollback;
>>>> + /* Get the real Ethernet overhead length */
>>>> + if (dev_info.max_mtu != UINT16_MAX &&
>>>> + dev_info.max_rx_pktlen > dev_info.max_mtu)
>>>> + overhead_len = dev_info.max_rx_pktlen - dev_info.max_mtu;
>>>> + else
>>>> + overhead_len = RTE_ETHER_HDR_LEN + RTE_ETHER_CRC_LEN;
>>>> +
>>> The Ethernet frame header length supported by each NIC may be
>>> different, which cause the difference of allowed packets size and
>>> drop you say.
>>> The diference of Ethernet frame header length have an impact for the
>>> maximum Ethernet frame length, which is a boundary value
>>> of enabling jumbo frame through the ' max_rx_pkt_len '.
>>> However, we need to do the same thing you do above to get the
>>> overhead_len every time, which will
>>> cause a lot of duplicate code in the framework and app. For examples,
>>> parsing and processing for '--max-pkt-len=xxx' parameter,
>>> and " cmd_config_max_pkt_len_parsed " in testpmd, and here
>>> modifying here dev_configure API.
>>> It's a little redundant and troublesome.
>>>
>>> Maybe, it is necessary for driver to directly report the supported
>>> maximum Ethernet frame length by rte_dev_info_get API.
>>> As following:
>>> struct rte_eth_dev_info {
>>> xxxx
>>> /**
>>> * The maximum Ethernet frame length supported by each
>>> * driver varies with the Ethernet header length.
>>> */
>>> uint16_t eth_max_len;
>>> xxxx
>>> }
>>>
>>> int
>>> rte_eth_dev_info_get(uint16_t port_id, struct rte_eth_dev_info
>>> *dev_info)
>>> {
>>> xxx
>>> dev_info->min_mtu = RTE_ETHER_MIN_MTU;
>>> dev_info->max_mtu = UINT16_MAX;
>>> dev_info->eth_max_len = RTE_ETHER_MAX_LEN;
>>> xxx
>>> }
>>>
>>> And then:
>>> xxx_devv_infos_get(struct rte_eth_dev *eth_dev, struct
>>> rte_eth_dev_info *info)
>>> {
>>> xxx
>>> info->eth_max_len = xxx_ETHER_MAX _LEN;
>>> xxx
>>> }
>>> What do you think?
>>
>> Hi Lijun,
>>
>> The 'max_mtu' has been added in the past to solve exact same problem,
>> perhaps it would be better to add something like 'eth_max_len' at that
>> time.
>>
>> But as Steve mentioned we are planning to switch to more MTU based
>> configuration, which should remove the need of the field you mentioned.
>>
>>>> /* If number of queues specified by application for both Rx
>>>> and Tx is
>>>> * zero, use driver preferred values. This cannot be done
>>>> individually
>>>> * as it is valid for either Tx or Rx (but not both) to be zero.
>>>> @@ -1410,11 +1422,18 @@ rte_eth_dev_configure(uint16_t port_id,
>>>> uint16_t nb_rx_q, uint16_t nb_tx_q,
>>>> goto rollback;
>>>> }
>>>> } else {
>>>> - if (dev_conf->rxmode.max_rx_pkt_len < RTE_ETHER_MIN_LEN ||
>>>> - dev_conf->rxmode.max_rx_pkt_len > RTE_ETHER_MAX_LEN)
>>>> + uint16_t pktlen = dev_conf->rxmode.max_rx_pkt_len;
>>>> + if (pktlen < RTE_ETHER_MIN_MTU + overhead_len ||
>>>> + pktlen > RTE_ETHER_MTU + overhead_len)
>>>> /* Use default value */
>>>> dev->data->dev_conf.rxmode.max_rx_pkt_len =
>>>> - RTE_ETHER_MAX_LEN;
>>>> + RTE_ETHER_MTU + overhead_len;
>>>> + }
>>>> +
>>>> + /* Scale the MTU size to adapt max_rx_pkt_len */
>>>> + if (dev_conf->rxmode.offloads & DEV_RX_OFFLOAD_JUMBO_FRAME) {
>>>> + dev->data->mtu = dev->data->dev_conf.rxmode.max_rx_pkt_len -
>>>> + overhead_len;
>>>> }
>>> Now that we update mtu here when jumbo frame enabled. It is necessary
>>> to check validity of max_rx_pkt_len.
>>> As following:
>>> if (dev_conf->rxmode.offloads & DEV_RX_OFFLOAD_JUMBO_FRAME) {
>>> if (dev_conf->rxmode.max_rx_pkt_len > dev_info.max_rx_pktlen ||
>>> dev_conf->rxmode.max_rx_pkt_len <= RTE_ETHER_MTU +
>>> overhead_len) {
>>
>> It is not clear from API that if "max_rx_pkt_len <= RTE_ETHER_MTU +
>> overhead_len" is a valid value or not, the API says:
>> "max_rx_pkt_len; /**< Only used if JUMBO_FRAME enabled. */"
>>
>> But it doesn't say that when 'DEV_RX_OFFLOAD_JUMBO_FRAME' is set,
>> 'max_rx_pkt_len' should be less then 'RTE_ETHER_MTU'
>>
> The MTU setting entry does need to be adjusted. I agree! But I think
> this place should be modified, and it's probably more reasonable.
>
> Generally speaking, max_rx_pkt_len will be also updated with 'mtu +
> overhead_len' also when application sets mtu > 1500, which means
> JUMBO_FRAME is enabled.
> Namely, JUMBO_FRAME is enabled based on mtu > 1500 or max_rx_pkt_len >
> 1500 + overhead_len.
> Besides, having following check for "rxmode.offloads &
> DEV_RX_OFFLOAD_JUMBO_FRAME == 0":
> @@ -1410,11 +1422,18 @@ rte_eth_dev_configure(uint16_t port_id, uint16_t
> nb_rx_q, uint16_t nb_tx_q,
> goto rollback;
> }
> } else {
> uint16_t pktlen = dev_conf->rxmode.max_rx_pkt_len;
> if (pktlen < RTE_ETHER_MIN_MTU + overhead_len ||
> pktlen > RTE_ETHER_MTU + overhead_len)
> /* Use default value */
> dev->data->dev_conf.rxmode.max_rx_pkt_len =
> RTE_ETHER_MTU + overhead_len;
> }
> One of check condition for the branch is "pktlen > RTE_ETHER_MTU +
> overhead_len ".
>
> In view of the above two aspects, when application set
> DEV_RX_OFFLOAD_JUMBO_FRAME in offload, the max_rx_pkt_len must be
> greater than " RTE_ETHER_MTU + overhead_len "
>
> Since DEV_RX_OFFLOAD_JUMBO_FRAME is not removed, so the check is necessary.
>
>>> xxxx
>>> }
>>> } else {
>>> xxx
>>> }
>>>
>>> If it does not thing above, which will cause an unreasonable case.
>>> Like,
>>> dev_conf->rxmode.offloads & DEV_RX_OFFLOAD_JUMBO_FRAME == 1
>>> dev_conf->rxmode.max_rx_pkt_len = 1500
>>> overhead_len = 26
>>> dev->data->mtu = dev_conf->rxmode.max_rx_pkt_len - overhead_len =
>>> 1500 - 26 = 1474
>>>
>>
>> This looks correct, if the applicatin is requesting 'max_rx_pkt_len =
>> 1500', the requeted MTU is 1474,
>> if application wants an MTU as 1500, it should set the
>> 'max_rx_pkt_len' as "1500 + overhead".
>>
>>> In fact, DEV_RX_OFFLOAD_JUMBO_FRAME is set to rxmode.offloads when
>>> mtu > 1500.
Now that there are two interfaces for modifying MTU, namely,
'rte_eth_dev_configure()' & 'rte_eth_dev_set_mtu()'.
They modify MTU based on 'max_rx_pkt_len' and 'mtu' value, respectively.
The 'max_rx_pkt_len' field has been used
in xxx_dev_configure ops in many PMD drivers. In addition, if
'DEV_RX_OFFLOAD_JUMBO_FRAME' is set, the value of
'max_rx_pkt_len' is also verified by using max_rx_pktlen and
RTE_ETHER_MTU + overhead_len in i40e and ice driver.
Currently, DEV_RX_OFFLOAD_JUMBO_FRAME has not been removed, so it is
necessary and reasonable
to check 'max_rx_pkt_len' in 'rte_eth_dev_configure()'.
Please check it again. Looking forward to your reply.
>>
>> Overall the 'max_rx_pkt_len' setting is a little messy, it has been
>> tried to fix in last release but we reverted them because of
>> unexpected side affects.
>>
>> Current long term plan is,
>> - Switch both 'rte_eth_dev_configure()' & 'rte_eth_dev_set_mtu()' to
>> work on MTU values. (instead one working on frame lenght and other on
>> MTU)
>> - Remove the 'DEV_RX_OFFLOAD_JUMBO_FRAME' and decide jumbo frame
>> request by requested MTU value check
>> - App decide the jumbo frame capability from the 'max_mtu' check
>> - App calculate Ethernet overhead using 'max_mtu' and 'max_rx_pktlen'
>>
>>>> /*
>>>> @@ -1549,6 +1568,8 @@ rte_eth_dev_configure(uint16_t port_id,
>>>> uint16_t nb_rx_q, uint16_t nb_tx_q,
>>>> eth_dev_tx_queue_config(dev, 0);
>>>> rollback:
>>>> memcpy(&dev->data->dev_conf, &orig_conf,
>>>> sizeof(dev->data->dev_conf));
>>>> + if (old_mtu != dev->data->mtu)
>>>> + dev->data->mtu = old_mtu;
>>>> rte_ethdev_trace_configure(port_id, nb_rx_q, nb_tx_q,
>>>> dev_conf, ret);
>>>> return ret;
>>>>
>>
>> .
>>
> .
>
next prev parent reply other threads:[~2021-01-23 10:54 UTC|newest]
Thread overview: 115+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-09 3:16 [dpdk-dev] [PATCH v1 00/12] fix rx packets dropped issue Steve Yang
2020-12-09 3:16 ` [dpdk-dev] [PATCH v1 01/12] net/dpaa2: fix the jumbo frame flag condition for mtu set Steve Yang
2020-12-09 3:16 ` [dpdk-dev] [PATCH v1 02/12] net/e1000: " Steve Yang
2020-12-09 3:16 ` [dpdk-dev] [PATCH v1 03/12] net/hns3: " Steve Yang
2020-12-09 3:16 ` [dpdk-dev] [PATCH v1 04/12] net/i40e: fix the jumbo frame flag condition Steve Yang
2020-12-09 3:16 ` [dpdk-dev] [PATCH v1 05/12] net/iavf: " Steve Yang
2020-12-09 3:16 ` [dpdk-dev] [PATCH v1 06/12] net/ice: " Steve Yang
2020-12-09 3:16 ` [dpdk-dev] [PATCH v1 07/12] net/ipn3ke: fix the jumbo frame flag condition for mtu set Steve Yang
2020-12-09 3:16 ` [dpdk-dev] [PATCH v1 08/12] net/octeontx: " Steve Yang
2020-12-09 3:16 ` [dpdk-dev] [PATCH v1 09/12] net/octeontx2: fix the jumbo frame flag condition for mtu Steve Yang
2020-12-21 7:16 ` [dpdk-dev] [EXT] " Sunil Kumar Kori
2020-12-09 3:16 ` [dpdk-dev] [PATCH v1 10/12] net/qede: fix the jumbo frame flag condition for mtu set Steve Yang
2020-12-09 3:16 ` [dpdk-dev] [PATCH v1 11/12] net/sfc: " Steve Yang
2020-12-09 3:16 ` [dpdk-dev] [PATCH v1 12/12] net/thunderx: " Steve Yang
2020-12-11 4:31 ` [dpdk-dev] [PATCH v1 00/12] fix rx packets dropped issue Guo, Jia
2020-12-14 17:44 ` Ferruh Yigit
2020-12-17 9:22 ` [dpdk-dev] [PATCH v2 00/22] " Steve Yang
2020-12-17 9:22 ` [dpdk-dev] [PATCH v2 01/22] ethdev: fix MTU size exceeds max rx packet length Steve Yang
2020-12-28 14:51 ` Andrew Rybchenko
2021-01-13 10:32 ` Ferruh Yigit
2020-12-30 10:19 ` oulijun
[not found] ` <DM6PR11MB43627F10DDAFC9801816FF5BF9D00@DM6PR11MB4362.namprd11.prod.outlook.com>
2021-01-13 10:25 ` Ferruh Yigit
2021-01-13 11:04 ` Ferruh Yigit
2020-12-17 9:22 ` [dpdk-dev] [PATCH v2 02/22] app/testpmd: fix max rx packet length for VLAN packets Steve Yang
2021-01-13 11:26 ` Ferruh Yigit
2020-12-17 9:22 ` [dpdk-dev] [PATCH v2 03/22] net/dpaa: fix the jumbo frame flag condition for mtu set Steve Yang
2020-12-17 9:22 ` [dpdk-dev] [PATCH v2 04/22] net/dpaa2: " Steve Yang
2020-12-17 9:22 ` [dpdk-dev] [PATCH v2 05/22] net/e1000: " Steve Yang
2020-12-18 2:42 ` Guo, Jia
2020-12-17 9:22 ` [dpdk-dev] [PATCH v2 06/22] net/hns3: " Steve Yang
2020-12-17 9:22 ` [dpdk-dev] [PATCH v2 07/22] net/i40e: fix the jumbo frame flag condition Steve Yang
2020-12-18 2:44 ` Guo, Jia
2020-12-17 9:22 ` [dpdk-dev] [PATCH v2 08/22] net/iavf: " Steve Yang
2020-12-17 9:22 ` [dpdk-dev] [PATCH v2 09/22] net/ice: " Steve Yang
2020-12-17 9:23 ` [dpdk-dev] [PATCH v2 10/22] net/ipn3ke: fix the jumbo frame flag condition for mtu set Steve Yang
2020-12-19 0:54 ` Xu, Rosen
2020-12-17 9:23 ` [dpdk-dev] [PATCH v2 11/22] net/octeontx: " Steve Yang
2020-12-21 15:04 ` [dpdk-dev] [EXT] " Harman Kalra
2020-12-17 9:23 ` [dpdk-dev] [PATCH v2 12/22] net/octeontx2: fix the jumbo frame flag condition for mtu Steve Yang
2020-12-18 10:15 ` Nithin Dabilpuram
2020-12-21 7:19 ` [dpdk-dev] [EXT] " Sunil Kumar Kori
2020-12-17 9:23 ` [dpdk-dev] [PATCH v2 13/22] net/qede: fix the jumbo frame flag condition for mtu set Steve Yang
2020-12-17 9:23 ` [dpdk-dev] [PATCH v2 14/22] net/sfc: " Steve Yang
2020-12-17 9:23 ` [dpdk-dev] [PATCH v2 15/22] net/thunderx: " Steve Yang
2020-12-17 9:23 ` [dpdk-dev] [PATCH v2 16/22] net/ixgbe: fix the jumbo frame flag condition Steve Yang
2020-12-18 2:43 ` Guo, Jia
2020-12-17 9:23 ` [dpdk-dev] [PATCH v2 17/22] net/cxgbe: " Steve Yang
2020-12-17 9:23 ` [dpdk-dev] [PATCH v2 18/22] net/axgbe: fix the jumbo frame flag condition for mtu set Steve Yang
2020-12-17 9:23 ` [dpdk-dev] [PATCH v2 19/22] net/enetc: " Steve Yang
2020-12-17 9:23 ` [dpdk-dev] [PATCH v2 20/22] net/hinic: " Steve Yang
2020-12-17 9:23 ` [dpdk-dev] [PATCH v2 21/22] net/nfp: " Steve Yang
2020-12-17 9:23 ` [dpdk-dev] [PATCH v2 22/22] net/liquidio: " Steve Yang
2021-01-13 11:32 ` [dpdk-dev] [PATCH v2 00/22] fix rx packets dropped issue Ferruh Yigit
2021-01-14 9:45 ` [dpdk-dev] [PATCH v3 " Steve Yang
2021-01-14 9:45 ` [dpdk-dev] [PATCH v3 01/22] ethdev: fix MTU size exceeds max rx packet length Steve Yang
2021-01-14 16:36 ` Ferruh Yigit
2021-01-14 17:13 ` Ferruh Yigit
2021-01-14 17:29 ` Andrew Boyer
2021-01-14 20:44 ` Ferruh Yigit
2021-01-15 10:44 ` oulijun
2021-01-18 10:42 ` Ferruh Yigit
2021-01-19 8:46 ` oulijun
2021-01-23 9:05 ` oulijun [this message]
2021-01-25 12:22 ` Ferruh Yigit
2021-01-18 7:04 ` [dpdk-dev] [PATCH v4 00/22] fix rx packets dropped issue Steve Yang
2021-01-18 7:04 ` [dpdk-dev] [PATCH v4 01/22] ethdev: fix MTU size exceeds max rx packet length Steve Yang
2021-01-18 7:04 ` [dpdk-dev] [PATCH v4 02/22] app/testpmd: fix max rx packet length for VLAN packets Steve Yang
2021-01-21 15:27 ` Lance Richardson
2021-01-22 14:26 ` Lance Richardson
2021-01-25 12:14 ` Ferruh Yigit
2021-01-18 7:04 ` [dpdk-dev] [PATCH v4 03/22] net/dpaa: fix the jumbo frame flag condition for mtu set Steve Yang
2021-01-18 7:04 ` [dpdk-dev] [PATCH v4 04/22] net/dpaa2: " Steve Yang
2021-01-18 7:04 ` [dpdk-dev] [PATCH v4 05/22] net/e1000: " Steve Yang
2021-01-18 7:04 ` [dpdk-dev] [PATCH v4 06/22] net/hns3: " Steve Yang
2021-01-18 7:04 ` [dpdk-dev] [PATCH v4 07/22] net/i40e: fix the jumbo frame flag condition Steve Yang
2021-01-18 7:04 ` [dpdk-dev] [PATCH v4 08/22] net/iavf: " Steve Yang
2021-01-18 7:04 ` [dpdk-dev] [PATCH v4 09/22] net/ice: " Steve Yang
2021-01-18 7:04 ` [dpdk-dev] [PATCH v4 10/22] net/ipn3ke: fix the jumbo frame flag condition for mtu set Steve Yang
2021-01-18 7:04 ` [dpdk-dev] [PATCH v4 11/22] net/octeontx: " Steve Yang
2021-01-18 7:04 ` [dpdk-dev] [PATCH v4 12/22] net/octeontx2: fix the jumbo frame flag condition for mtu Steve Yang
2021-01-18 7:04 ` [dpdk-dev] [PATCH v4 13/22] net/qede: fix the jumbo frame flag condition for mtu set Steve Yang
2021-01-18 7:04 ` [dpdk-dev] [PATCH v4 14/22] net/sfc: " Steve Yang
2021-01-18 7:04 ` [dpdk-dev] [PATCH v4 15/22] net/thunderx: " Steve Yang
2021-01-18 7:04 ` [dpdk-dev] [PATCH v4 16/22] net/ixgbe: fix the jumbo frame flag condition Steve Yang
2021-01-18 7:04 ` [dpdk-dev] [PATCH v4 17/22] net/cxgbe: " Steve Yang
2021-01-18 7:04 ` [dpdk-dev] [PATCH v4 18/22] net/axgbe: fix the jumbo frame flag condition for mtu set Steve Yang
2021-01-18 7:04 ` [dpdk-dev] [PATCH v4 19/22] net/enetc: " Steve Yang
2021-01-18 7:04 ` [dpdk-dev] [PATCH v4 20/22] net/hinic: " Steve Yang
2021-01-18 7:04 ` [dpdk-dev] [PATCH v4 21/22] net/nfp: " Steve Yang
2021-01-18 7:04 ` [dpdk-dev] [PATCH v4 22/22] net/liquidio: " Steve Yang
2021-01-18 11:54 ` [dpdk-dev] [PATCH v4 00/22] fix rx packets dropped issue Ferruh Yigit
2021-01-14 9:45 ` [dpdk-dev] [PATCH v3 02/22] app/testpmd: fix max rx packet length for VLAN packets Steve Yang
2021-01-14 9:45 ` [dpdk-dev] [PATCH v3 03/22] net/dpaa: fix the jumbo frame flag condition for mtu set Steve Yang
2021-01-14 10:26 ` Hemant Agrawal
2021-01-14 9:46 ` [dpdk-dev] [PATCH v3 04/22] net/dpaa2: " Steve Yang
2021-01-14 10:27 ` Hemant Agrawal
2021-01-14 9:46 ` [dpdk-dev] [PATCH v3 05/22] net/e1000: " Steve Yang
2021-01-14 9:46 ` [dpdk-dev] [PATCH v3 06/22] net/hns3: " Steve Yang
2021-01-18 1:30 ` oulijun
2021-01-14 9:46 ` [dpdk-dev] [PATCH v3 07/22] net/i40e: fix the jumbo frame flag condition Steve Yang
2021-01-14 9:46 ` [dpdk-dev] [PATCH v3 08/22] net/iavf: " Steve Yang
2021-01-14 9:46 ` [dpdk-dev] [PATCH v3 09/22] net/ice: " Steve Yang
2021-01-14 9:46 ` [dpdk-dev] [PATCH v3 10/22] net/ipn3ke: fix the jumbo frame flag condition for mtu set Steve Yang
2021-01-14 9:46 ` [dpdk-dev] [PATCH v3 11/22] net/octeontx: " Steve Yang
2021-01-14 9:46 ` [dpdk-dev] [PATCH v3 12/22] net/octeontx2: fix the jumbo frame flag condition for mtu Steve Yang
2021-01-14 9:46 ` [dpdk-dev] [PATCH v3 13/22] net/qede: fix the jumbo frame flag condition for mtu set Steve Yang
2021-01-14 9:47 ` [dpdk-dev] [PATCH v3 14/22] net/sfc: " Steve Yang
2021-01-14 9:47 ` [dpdk-dev] [PATCH v3 15/22] net/thunderx: " Steve Yang
2021-01-14 9:47 ` [dpdk-dev] [PATCH v3 16/22] net/ixgbe: fix the jumbo frame flag condition Steve Yang
2021-01-14 9:47 ` [dpdk-dev] [PATCH v3 17/22] net/cxgbe: " Steve Yang
2021-01-14 9:47 ` [dpdk-dev] [PATCH v3 18/22] net/axgbe: fix the jumbo frame flag condition for mtu set Steve Yang
2021-01-14 9:47 ` [dpdk-dev] [PATCH v3 19/22] net/enetc: " Steve Yang
2021-01-14 9:47 ` [dpdk-dev] [PATCH v3 20/22] net/hinic: " Steve Yang
2021-01-14 9:47 ` [dpdk-dev] [PATCH v3 21/22] net/nfp: " Steve Yang
2021-01-14 9:47 ` [dpdk-dev] [PATCH v3 22/22] net/liquidio: " Steve Yang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=a56ea062-b272-2433-3b7e-7f93eb0987ae@huawei.com \
--to=oulijun@huawei.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).