From: Gaetan Rivet <gaetan.rivet@6wind.com>
To: dev@dpdk.org
Subject: [dpdk-dev] [PATCH 10/12] net/failsafe: support offload capabilities
Date: Fri, 3 Mar 2017 16:40:32 +0100 [thread overview]
Message-ID: <a911c558ef15816aaac8050bff4b23104f937dff.1488550982.git.gaetan.rivet@6wind.com> (raw)
In-Reply-To: <cover.1488550982.git.gaetan.rivet@6wind.com>
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
---
drivers/net/failsafe/failsafe_ops.c | 125 +++++++++++++++++++++++++++++++++++-
1 file changed, 123 insertions(+), 2 deletions(-)
diff --git a/drivers/net/failsafe/failsafe_ops.c b/drivers/net/failsafe/failsafe_ops.c
index 57de33f..0ed49b2 100644
--- a/drivers/net/failsafe/failsafe_ops.c
+++ b/drivers/net/failsafe/failsafe_ops.c
@@ -63,22 +63,143 @@ static struct rte_eth_dev_info default_infos = {
.nb_seg_max = UINT16_MAX,
.nb_mtu_seg_max = UINT16_MAX,
},
- /* Set of understood capabilities */
- .rx_offload_capa = 0x0,
+ /*
+ * Set of capabilities that can be verified upon
+ * configuring a sub-device.
+ */
+ .rx_offload_capa =
+ DEV_RX_OFFLOAD_VLAN_STRIP |
+ DEV_RX_OFFLOAD_QINQ_STRIP |
+ DEV_RX_OFFLOAD_IPV4_CKSUM |
+ DEV_RX_OFFLOAD_UDP_CKSUM |
+ DEV_RX_OFFLOAD_TCP_CKSUM |
+ DEV_RX_OFFLOAD_TCP_LRO,
.tx_offload_capa = 0x0,
.flow_type_rss_offloads = 0x0,
};
+/**
+ * Check whether a specific offloading capability
+ * is supported by a sub_device.
+ *
+ * @return
+ * 0: all requested capabilities are supported by the sub_device
+ * positive value: This flag at least is not supported by the sub_device
+ */
+static int
+fs_port_offload_validate(struct rte_eth_dev *dev,
+ struct sub_device *sdev)
+{
+ struct rte_eth_dev_info infos = {0};
+ struct rte_eth_conf *cf;
+ uint32_t cap;
+
+ cf = &dev->data->dev_conf;
+ SUBOPS(sdev, dev_infos_get)(ETH(sdev), &infos);
+ /* RX capabilities */
+ cap = infos.rx_offload_capa;
+ if (cf->rxmode.hw_vlan_strip &&
+ ((cap & DEV_RX_OFFLOAD_VLAN_STRIP) == 0)) {
+ WARN("VLAN stripping offload requested but not supported by sub_device %d",
+ SUB_ID(sdev));
+ return DEV_RX_OFFLOAD_VLAN_STRIP;
+ }
+ if (cf->rxmode.hw_ip_checksum &&
+ ((cap & (DEV_RX_OFFLOAD_IPV4_CKSUM |
+ DEV_RX_OFFLOAD_UDP_CKSUM |
+ DEV_RX_OFFLOAD_TCP_CKSUM)) !=
+ (DEV_RX_OFFLOAD_IPV4_CKSUM |
+ DEV_RX_OFFLOAD_UDP_CKSUM |
+ DEV_RX_OFFLOAD_TCP_CKSUM))) {
+ WARN("IP checksum offload requested but not supported by sub_device %d",
+ SUB_ID(sdev));
+ return DEV_RX_OFFLOAD_IPV4_CKSUM |
+ DEV_RX_OFFLOAD_UDP_CKSUM |
+ DEV_RX_OFFLOAD_TCP_CKSUM;
+ }
+ if (cf->rxmode.enable_lro &&
+ ((cap & DEV_RX_OFFLOAD_TCP_LRO) == 0)) {
+ WARN("TCP LRO offload requested but not supported by sub_device %d",
+ SUB_ID(sdev));
+ return DEV_RX_OFFLOAD_TCP_LRO;
+ }
+ if (cf->rxmode.hw_vlan_extend &&
+ ((cap & DEV_RX_OFFLOAD_QINQ_STRIP) == 0)) {
+ WARN("Stacked VLAN stripping offload requested but not supported by sub_device %d",
+ SUB_ID(sdev));
+ return DEV_RX_OFFLOAD_QINQ_STRIP;
+ }
+ /* TX capabilities */
+ /* Nothing to do, no tx capa supported */
+ return 0;
+}
+
+/*
+ * Disable the dev_conf flag related to an offload capability flag
+ * within an ethdev configuration.
+ */
+static int
+fs_port_disable_offload(struct rte_eth_conf *cf,
+ uint32_t ol_cap)
+{
+ switch (ol_cap) {
+ case DEV_RX_OFFLOAD_VLAN_STRIP:
+ INFO("Disabling VLAN stripping offload");
+ cf->rxmode.hw_vlan_strip = 0;
+ break;
+ case DEV_RX_OFFLOAD_IPV4_CKSUM:
+ case DEV_RX_OFFLOAD_UDP_CKSUM:
+ case DEV_RX_OFFLOAD_TCP_CKSUM:
+ case (DEV_RX_OFFLOAD_IPV4_CKSUM |
+ DEV_RX_OFFLOAD_UDP_CKSUM |
+ DEV_RX_OFFLOAD_TCP_CKSUM):
+ INFO("Disabling IP checksum offload");
+ cf->rxmode.hw_ip_checksum = 0;
+ break;
+ case DEV_RX_OFFLOAD_TCP_LRO:
+ INFO("Disabling TCP LRO offload");
+ cf->rxmode.enable_lro = 0;
+ break;
+ case DEV_RX_OFFLOAD_QINQ_STRIP:
+ INFO("Disabling stacked VLAN stripping offload");
+ cf->rxmode.hw_vlan_extend = 0;
+ break;
+ default:
+ DEBUG("Unable to disable offload capability: %" PRIx32,
+ ol_cap);
+ return -1;
+ }
+ return 0;
+}
+
static int
fs_dev_configure(struct rte_eth_dev *dev)
{
struct sub_device *sdev;
uint8_t i;
+ int capa_flag;
int ret;
FOREACH_SUBDEV(sdev, i, dev) {
if (sdev->state != DEV_PROBED)
continue;
+ DEBUG("Checking capabilities for sub_device %d", i);
+ while ((capa_flag = fs_port_offload_validate(dev, sdev))) {
+ if (PRIV(dev)->state >= DEV_ACTIVE) {
+ ERROR("device already configured, cannot fix live configuration");
+ return -1;
+ }
+ ret = fs_port_disable_offload(&dev->data->dev_conf,
+ capa_flag);
+ if (ret) {
+ ERROR("Unable to disable offload capability");
+ return ret;
+ }
+ }
+ }
+ FOREACH_SUBDEV(sdev, i, dev) {
+ if (sdev->state != DEV_PROBED)
+ continue;
DEBUG("Configuring sub-device %d", i);
ret = rte_eth_dev_configure(PORT_ID(sdev),
dev->data->nb_rx_queues,
--
2.1.4
next prev parent reply other threads:[~2017-03-03 15:40 UTC|newest]
Thread overview: 49+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-03-03 15:40 [dpdk-dev] [PATCH 00/12] introduce fail-safe PMD Gaetan Rivet
2017-03-03 15:40 ` [dpdk-dev] [PATCH 01/12] ethdev: save VLAN filter setting Gaetan Rivet
2017-03-03 17:33 ` Stephen Hemminger
2017-03-03 15:40 ` [dpdk-dev] [PATCH 02/12] ethdev: add flow API rule copy function Gaetan Rivet
2017-03-03 15:40 ` [dpdk-dev] [PATCH 03/12] ethdev: add deferred intermediate device state Gaetan Rivet
2017-03-03 17:34 ` Stephen Hemminger
2017-03-03 15:40 ` [dpdk-dev] [PATCH 04/12] pci: expose device detach routine Gaetan Rivet
2017-03-03 15:40 ` [dpdk-dev] [PATCH 05/12] pci: expose parse and probe routines Gaetan Rivet
2017-03-03 15:40 ` [dpdk-dev] [PATCH 06/12] net/failsafe: add fail-safe PMD Gaetan Rivet
2017-03-03 17:38 ` Stephen Hemminger
2017-03-06 14:19 ` Gaëtan Rivet
2017-03-03 15:40 ` [dpdk-dev] [PATCH 07/12] net/failsafe: add plug-in support Gaetan Rivet
2017-03-03 15:40 ` [dpdk-dev] [PATCH 08/12] net/failsafe: add flexible device definition Gaetan Rivet
2017-03-03 15:40 ` [dpdk-dev] [PATCH 09/12] net/failsafe: support flow API Gaetan Rivet
2017-03-03 15:40 ` Gaetan Rivet [this message]
2017-03-03 15:40 ` [dpdk-dev] [PATCH 11/12] net/failsafe: add fast burst functions Gaetan Rivet
2017-03-03 15:40 ` [dpdk-dev] [PATCH 12/12] net/failsafe: support device removal Gaetan Rivet
2017-03-03 16:14 ` [dpdk-dev] [PATCH 00/12] introduce fail-safe PMD Bruce Richardson
2017-03-06 13:53 ` Gaëtan Rivet
2017-03-03 17:27 ` Stephen Hemminger
2017-03-08 15:15 ` [dpdk-dev] [PATCH v2 00/13] " Gaetan Rivet
2017-03-08 15:15 ` [dpdk-dev] [PATCH v2 01/13] ethdev: save VLAN filter setting Gaetan Rivet
2017-03-08 15:15 ` [dpdk-dev] [PATCH v2 02/13] ethdev: add flow API rule copy function Gaetan Rivet
2017-03-08 15:15 ` [dpdk-dev] [PATCH v2 03/13] ethdev: add deferred intermediate device state Gaetan Rivet
2017-03-08 15:15 ` [dpdk-dev] [PATCH v2 04/13] pci: expose device detach routine Gaetan Rivet
2017-03-08 15:15 ` [dpdk-dev] [PATCH v2 05/13] pci: expose parse and probe routines Gaetan Rivet
2017-03-08 15:15 ` [dpdk-dev] [PATCH v2 06/13] net/failsafe: add fail-safe PMD Gaetan Rivet
2017-03-08 15:15 ` [dpdk-dev] [PATCH v2 07/13] net/failsafe: add plug-in support Gaetan Rivet
2017-03-08 15:15 ` [dpdk-dev] [PATCH v2 08/13] net/failsafe: add flexible device definition Gaetan Rivet
2017-03-08 15:15 ` [dpdk-dev] [PATCH v2 09/13] net/failsafe: support flow API Gaetan Rivet
2017-03-08 15:15 ` [dpdk-dev] [PATCH v2 10/13] net/failsafe: support offload capabilities Gaetan Rivet
2017-03-08 15:15 ` [dpdk-dev] [PATCH v2 11/13] net/failsafe: add fast burst functions Gaetan Rivet
2017-03-08 15:15 ` [dpdk-dev] [PATCH v2 12/13] net/failsafe: support device removal Gaetan Rivet
2017-03-08 15:15 ` [dpdk-dev] [PATCH v2 13/13] net/failsafe: support link status change event Gaetan Rivet
2017-03-08 16:54 ` [dpdk-dev] [PATCH v2 00/13] introduce fail-safe PMD Neil Horman
2017-03-09 9:15 ` Bruce Richardson
2017-03-10 9:13 ` Gaëtan Rivet
2017-03-10 22:43 ` Neil Horman
2017-03-14 14:49 ` Gaëtan Rivet
2017-03-15 3:28 ` Bruce Richardson
2017-03-15 11:15 ` Thomas Monjalon
2017-03-15 14:25 ` Gaëtan Rivet
2017-03-16 20:50 ` Neil Horman
2017-03-17 10:56 ` Gaëtan Rivet
2017-03-18 19:51 ` Neil Horman
2017-03-20 15:00 ` Thomas Monjalon
2017-05-17 12:50 ` Ferruh Yigit
2017-05-17 16:59 ` Gaëtan Rivet
2017-03-23 13:01 ` Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=a911c558ef15816aaac8050bff4b23104f937dff.1488550982.git.gaetan.rivet@6wind.com \
--to=gaetan.rivet@6wind.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).