From: Ferruh Yigit <ferruh.yigit@intel.com>
To: Jerin Jacob <jerin.jacob@caviumnetworks.com>, dev@dpdk.org
Cc: santosh.shukla@caviumnetworks.com
Subject: Re: [dpdk-dev] [PATCH 00/26] DPDK PMD for OCTEONTX NW device
Date: Tue, 5 Sep 2017 18:43:37 +0100 [thread overview]
Message-ID: <b67adee9-bb8b-9a9e-f064-e2a078340475@intel.com> (raw)
In-Reply-To: <20170831145436.5397-1-jerin.jacob@caviumnetworks.com>
On 8/31/2017 3:54 PM, Jerin Jacob wrote:
> This patch set provides the initial version of DPDK PMD for the
> integrated NIC device found in Cavium OCTEONTX SoC(CN83xx) family.
>
> Introduction to OCTEONTX ARM processors can be found
> here: http://www.cavium.com/OCTEON-TX_ARM_Processors.html
>
> OCTEONTX SoC family has two types of NIC controllers,
> 1) nicvf HW, Which is more like traditional NIC(no NPU HW accelerators)
> http://dpdk.org/doc/guides/nics/thunderx.html
>
> 2) NIC controller, based on NPU like HW accelerated coprocessors, like
> HW assisted mempool manager, HW assisted packet scheduler, etc
>
> This driver adds support for the second type device and which will be
> used as HW implementation driver ethdev-eventdev Rx adapter [1]
>
> Implemented features and PMD documentation added
> in doc/guides/nics/features/octeontx.ini and doc/guides/nics/octeontx.rst
> respectively in this patch set.
>
> This driver has the dependency on:
> - IOVA infrastructure [2].
> - Dynamically configure mempool handle (ie.. --mbuf-pool-ops eal arg) [3].
> - Infrastructure to support octeontx HW mempool manager [4].
> - Cavium Octeontx external mempool driver [5]
> Git source repo for all above dependency patches located at [6].
Hi Jerin,
At first glance PMD looks good to me, but currently there are many
dependencies and I am not able to apply the set. I will wait a little
more for dependent patches to settle down and will re-visit this again.
>
> The series has three check patch issues:
> 1) 1 Error on Complex Macro (which I believe it cannot be fixed) # Patch 2
> 2) 1 Error on spacing while using gcc inline assembly(it is false positive) # patch 2
> 3) Added Co-authored-by: signature to reflect the patch authorship status instead
> of "Signed-off-by". It can be changed or the contributing guide can be
> updated based on the community feedback in v2.
>
> [1] http://dpdk.org/dev/patchwork/patch/24176/
Are these APIs used in this patchset, I looked for them but not able to
find ...
> [2] http://dpdk.org/ml/archives/dev/2017-August/072871.html
> [3] http://dpdk.org/ml/archives/dev/2017-August/072910.html
> [4] http://dpdk.org/ml/archives/dev/2017-August/072892.html
> [5] http://dpdk.org/ml/archives/dev/2017-August/073898.html
> [6] https://github.com/sshukla82/dpdk
> branch: mempool-v2
>
> Jerin Jacob (26):
> net/octeontx: add build infrastructure
> net/octeontx/base: add octeontx io operations
> event/octeontx: introduce specialized mbox message copy
> net/octeontx/base: add base BGX operations
> net/octeontx/base: add remaining BGX operations
> net/octeontx/base: probe PKI and PKO PCIe VF devices
> net/octeontx/base: add base PKI operations
> net/octeontx/base: add remaining PKI operations
> net/octeontx/base: add base PKO operations
> net/octeontx/base: add remaining PKO operations
> net/octeontx: add eth device probe and remove
> net/octeontx: create ethdev ports
> net/octeontx: add device configure
> net/octeontx: add device info
> net/octeontx: add link update
> net/octeontx: add promiscuous mode ops
> net/octeontx: add basic stats support
> net/octeontx: add MAC addr set op
> net/octeontx: add Rx queue setup and release ops
> net/octeontx: add Tx queue start and stop
> net/octeontx: add Tx queue setup and release ops
> net/octeontx: add packet transmit burst function
> net/octeontx: add packet receive burst function
> net/octeontx: add packet type parsing support
> net/octeontx: add start and stop support
> doc: add octeontx ethdev driver documentation
<...>
next prev parent reply other threads:[~2017-09-05 17:43 UTC|newest]
Thread overview: 65+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-08-31 14:54 Jerin Jacob
2017-08-31 14:54 ` [dpdk-dev] [PATCH 01/26] net/octeontx: add build infrastructure Jerin Jacob
2017-08-31 14:54 ` [dpdk-dev] [PATCH 02/26] net/octeontx/base: add octeontx io operations Jerin Jacob
2017-08-31 14:54 ` [dpdk-dev] [PATCH 03/26] event/octeontx: introduce specialized mbox message copy Jerin Jacob
2017-08-31 14:54 ` [dpdk-dev] [PATCH 04/26] net/octeontx/base: add base BGX operations Jerin Jacob
2017-08-31 14:54 ` [dpdk-dev] [PATCH 05/26] net/octeontx/base: add remaining " Jerin Jacob
2017-08-31 14:54 ` [dpdk-dev] [PATCH 06/26] net/octeontx/base: probe PKI and PKO PCIe VF devices Jerin Jacob
2017-09-05 17:44 ` Ferruh Yigit
2017-09-11 18:27 ` Jerin Jacob
2017-08-31 14:54 ` [dpdk-dev] [PATCH 07/26] net/octeontx/base: add base PKI operations Jerin Jacob
2017-08-31 14:54 ` [dpdk-dev] [PATCH 08/26] net/octeontx/base: add remaining " Jerin Jacob
2017-08-31 14:54 ` [dpdk-dev] [PATCH 09/26] net/octeontx/base: add base PKO operations Jerin Jacob
2017-08-31 14:54 ` [dpdk-dev] [PATCH 10/26] net/octeontx/base: add remaining " Jerin Jacob
2017-08-31 14:54 ` [dpdk-dev] [PATCH 11/26] net/octeontx: add eth device probe and remove Jerin Jacob
2017-08-31 14:54 ` [dpdk-dev] [PATCH 12/26] net/octeontx: create ethdev ports Jerin Jacob
2017-08-31 14:54 ` [dpdk-dev] [PATCH 13/26] net/octeontx: add device configure Jerin Jacob
2017-08-31 14:54 ` [dpdk-dev] [PATCH 14/26] net/octeontx: add device info Jerin Jacob
2017-08-31 14:54 ` [dpdk-dev] [PATCH 15/26] net/octeontx: add link update Jerin Jacob
2017-08-31 14:54 ` [dpdk-dev] [PATCH 16/26] net/octeontx: add promiscuous mode ops Jerin Jacob
2017-08-31 14:54 ` [dpdk-dev] [PATCH 17/26] net/octeontx: add basic stats support Jerin Jacob
2017-08-31 14:54 ` [dpdk-dev] [PATCH 18/26] net/octeontx: add MAC addr set op Jerin Jacob
2017-08-31 14:54 ` [dpdk-dev] [PATCH 19/26] net/octeontx: add Rx queue setup and release ops Jerin Jacob
2017-08-31 14:54 ` [dpdk-dev] [PATCH 20/26] net/octeontx: add Tx queue start and stop Jerin Jacob
2017-08-31 14:54 ` [dpdk-dev] [PATCH 21/26] net/octeontx: add Tx queue setup and release ops Jerin Jacob
2017-08-31 14:54 ` [dpdk-dev] [PATCH 22/26] net/octeontx: add packet transmit burst function Jerin Jacob
2017-08-31 14:54 ` [dpdk-dev] [PATCH 23/26] net/octeontx: add packet receive " Jerin Jacob
2017-08-31 14:54 ` [dpdk-dev] [PATCH 24/26] net/octeontx: add packet type parsing support Jerin Jacob
2017-08-31 14:54 ` [dpdk-dev] [PATCH 25/26] net/octeontx: add start and stop support Jerin Jacob
2017-08-31 14:54 ` [dpdk-dev] [PATCH 26/26] doc: add octeontx ethdev driver documentation Jerin Jacob
2017-09-19 13:59 ` Mcnamara, John
2017-09-05 17:43 ` Ferruh Yigit [this message]
2017-09-11 18:15 ` [dpdk-dev] [PATCH 00/26] DPDK PMD for OCTEONTX NW device Jerin Jacob
2017-10-03 19:01 ` Ferruh Yigit
2017-10-04 5:27 ` santosh
2017-10-08 12:44 ` [dpdk-dev] [PATCH v2 " Santosh Shukla
2017-10-08 12:44 ` [dpdk-dev] [PATCH v2 01/26] net/octeontx: add build infrastructure Santosh Shukla
2017-10-08 12:44 ` [dpdk-dev] [PATCH v2 02/26] net/octeontx/base: add octeontx io operations Santosh Shukla
2017-10-08 12:44 ` [dpdk-dev] [PATCH v2 03/26] event/octeontx: introduce specialized mbox message copy Santosh Shukla
2017-10-08 12:44 ` [dpdk-dev] [PATCH v2 04/26] net/octeontx/base: add base BGX operations Santosh Shukla
2017-10-08 12:44 ` [dpdk-dev] [PATCH v2 05/26] net/octeontx/base: add remaining " Santosh Shukla
2017-10-08 12:44 ` [dpdk-dev] [PATCH v2 06/26] net/octeontx/base: probe PKI and PKO PCIe VF devices Santosh Shukla
2017-10-08 12:44 ` [dpdk-dev] [PATCH v2 07/26] net/octeontx/base: add base PKI operations Santosh Shukla
2017-10-08 12:44 ` [dpdk-dev] [PATCH v2 08/26] net/octeontx/base: add remaining " Santosh Shukla
2017-10-08 12:44 ` [dpdk-dev] [PATCH v2 09/26] net/octeontx/base: add base PKO operations Santosh Shukla
2017-10-08 12:44 ` [dpdk-dev] [PATCH v2 10/26] net/octeontx/base: add remaining " Santosh Shukla
2017-10-08 12:44 ` [dpdk-dev] [PATCH v2 11/26] net/octeontx: add eth device probe and remove Santosh Shukla
2017-10-08 12:44 ` [dpdk-dev] [PATCH v2 12/26] net/octeontx: create ethdev ports Santosh Shukla
2017-10-08 12:44 ` [dpdk-dev] [PATCH v2 13/26] net/octeontx: add device configure Santosh Shukla
2017-10-08 12:44 ` [dpdk-dev] [PATCH v2 14/26] net/octeontx: add device info Santosh Shukla
2017-10-08 12:44 ` [dpdk-dev] [PATCH v2 15/26] net/octeontx: add link update Santosh Shukla
2017-10-08 12:44 ` [dpdk-dev] [PATCH v2 16/26] net/octeontx: add promiscuous mode ops Santosh Shukla
2017-10-08 12:44 ` [dpdk-dev] [PATCH v2 17/26] net/octeontx: add basic stats support Santosh Shukla
2017-10-08 12:44 ` [dpdk-dev] [PATCH v2 18/26] net/octeontx: add MAC addr set op Santosh Shukla
2017-10-08 12:44 ` [dpdk-dev] [PATCH v2 19/26] net/octeontx: add Rx queue setup and release ops Santosh Shukla
2017-10-08 12:44 ` [dpdk-dev] [PATCH v2 20/26] net/octeontx: add Tx queue start and stop Santosh Shukla
2017-10-08 12:44 ` [dpdk-dev] [PATCH v2 21/26] net/octeontx: add Tx queue setup and release ops Santosh Shukla
2017-10-08 12:44 ` [dpdk-dev] [PATCH v2 22/26] net/octeontx: add packet transmit burst function Santosh Shukla
2017-10-08 12:44 ` [dpdk-dev] [PATCH v2 23/26] net/octeontx: add packet receive " Santosh Shukla
2017-10-08 12:44 ` [dpdk-dev] [PATCH v2 24/26] net/octeontx: add packet type parsing support Santosh Shukla
2017-10-08 12:44 ` [dpdk-dev] [PATCH v2 25/26] net/octeontx: add start and stop support Santosh Shukla
2017-10-08 12:44 ` [dpdk-dev] [PATCH v2 26/26] doc: add octeontx ethdev driver documentation Santosh Shukla
2017-10-09 2:07 ` [dpdk-dev] [PATCH v2 00/26] DPDK PMD for OCTEONTX NW device Ferruh Yigit
2017-10-09 5:12 ` santosh
2017-10-11 10:35 ` Thomas Monjalon
2017-10-11 10:58 ` Jerin Jacob
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=b67adee9-bb8b-9a9e-f064-e2a078340475@intel.com \
--to=ferruh.yigit@intel.com \
--cc=dev@dpdk.org \
--cc=jerin.jacob@caviumnetworks.com \
--cc=santosh.shukla@caviumnetworks.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).